1997 m. automatinė lovadėžė (automatinis kaltinis įrenginys), Marzani markė, BEMA modelis, tipas ...

Marzani BEMA

Būklė: labai geros būklės (naudotas), GANTRY LOADER with DOUBLE LOADING STATION Vacuum system (with its pump) Duedpfsd Rg Dpex Affop No. 4 vertical columns supporting the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley to which horizontal arms are attached No. 2 adjustable horizontal metal arms with vacuum suction cups No. 2 floor-mounted rollers for feeding panel stacks into the Loader No. 1 motorized roller table (delivering panels to the Unloader), with additional cross motorized conveyor belts (at 90°). Dimensions approx. 7,232 mm Separate electrical and control panel OMRON electronic controls Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Minimum/maximum board thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1,200 x 3,200 mm Installed power: 23.3 kW

Būklė: naudotas, Gamybos metai: 2012, Integrated NC machining centre for windows and doors, comprising: A) Automatic loader model "SP" Automatic loader for Base SP No. 1 profiling machine - Automatic loader consisting of: - Table with motorised belts - Automatic device for transferring parts from the buffer to the loading area of the profiling machine * Min. workpiece length: 450 mm, max.: 3200 mm * Min. workpiece width: 40 mm, max.: 230 mm * Min. workpiece thickness: 40 mm, max.: 120 mm * Work cycles: 10/min * Chain feed speed on table: 7 m/min * Loading table dimensions: 2800 x 2150 mm B) Automatic profiling machine model SUPERSET NT C 6 Position 1 = Planing spindle Position 2 = 1st right vertical spindle Position 3 = 1st left vertical spindle Position 4 = 1st upper horizontal spindle Position 5 = 1st lower horizontal spindle Position 6 = Beading recovery unit Entry level 2500 mm Feed speed 6-36 m/min via frequency inverter No. 1 - Motor power 5.5 HP (4 kW) Horizontal pressure unit before planer with pneumatic disengagement from plate Duodpfx Ajixxwmeffjp Pneumatic disengagement from the control panel for the infeed unit before the planing spindle Tandem infeed unit before right vertical spindle, fast disengagement Infeed units after the upper spindles to reduce piece span from 620 mm to 450 mm Entry guide with bearings for automatic feeder Electrical setup for the use of automatic loader Manual central lubrication Pump for lubricating work surface with automatic drive System for inline integration with INTEGRA SYSTEM - Working height raised to 970 mm - Entry signal light (traffic light) - Piece counter Independent control cabinet POS. 1 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) T-SET quick tool clamping system - Allows locking/unlocking the tool with a simple air gun POS. 2 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Vertical spindle with 180 mm usable length T-SET quick tool clamping system Electronic vertical positioning POS. 3 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) High-precision spindle Vertical spindle with 180 mm usable length T-SET quick tool clamping system Electronic horizontal positioning POS. 4 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Speed 8,300 rpm T-SET quick tool clamping system Electronic vertical positioning POS. 5 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Speed 8,300 rpm T-SET quick tool clamping system POS. 6 Beading recovery unit Includes: PRL enables automatic transition from planing to beading function and vice versa. - Spindle group with 30 mm shaft diameter, 30 mm length - Electronic horizontal positioning - Electronic vertical positioning - Hardware and PLC modifications for axis management - Tandem outfeed and modified

Būklė: geras (naudotas), Código: 0253 Marca: LARI E LARI - ITALIA Modelo: FR 20 - TA - Norma CE Centro de trabajo para fresado y taladrado en madera, plástico o materiales compuestos, puertas de madera, marcos de ventanas - Norma CE Datos técnicos: Recorrido del eje X: 3250 mm Recorrido del eje Y con herramienta a 90°: 130 mm Dusdjx A Hdxepfx Affsp Recorrido del eje Z con herramienta a 0°: 290 mm Recorrido del eje Z con herramienta a 90°: 175 mm Velocidad de trabajo del eje X: 40 m/min Velocidad de trabajo del eje Y: 30 m/min Velocidad de trabajo del eje Z: 30 m/min Unidad de taladrado y colocación de bisagras: Machos/Hembras Control de velocidad por inversor Sonda Portaherramientas tipo ER 25 Potencia del husillo eléctrico para taladrado de cabeza anuba: 2,2 kW Inclinación de la cabeza anuba: -10° a +90° Husillo eléctrico para fresado: 2,7 Hp a 18.000 rpm Portapinzas ER 32 Velocidad variable mediante inversor Inclinación de 0° a 90° para trabajos tanto verticales como horizontales Ordenador de máquina: control numérico - sistema operativo Windows XP - monitor en color - teclado alfanumérico - puerto USB - interpolación Mesa de trabajo con 3 mordazas deslizantes para fijación de piezas Potencia total instalada: 12 kW Diámetro de boca de aspiración: 120 mm Aire comprimido: 7-8 bar Dimensiones generales para el transporte: 4100 x 1500 x 2100 mm (alto) Peso de la máquina: 1.400 kg Peso del cuadro eléctrico: 250 kg

Būklė: naudotas, Bar-type machining center, 3 axes Duodpfx Afswh A Hisfsp

Būklė: geras (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 3 200 mm, ašies skersmuo: 60 mm, veleno greitis (maks.): 6 000 aps./min, frezavimo įrenginio galia: 7 500 W, sukimosi greitis (maks.): 6 000 aps./min, bendras aukštis: 600 mm, reikalingas plotis: 8 000 mm, vietos reikalavimas ilgis: 7 000 mm, bendras svoris: 15 500 kg, frezos veleno ilgis: 600 mm, pjūklo disko skersmuo: 400 mm, galia: 70 kW (95,17 AG), įėjimo įtampa: 380 V, aukščio reguliavimo tipas: elektrinis, padavimo variklio galia: 7 700 W, darbinio aukščio: 120 mm, darbinis plotis: 160 mm, Didelio našumo langų gamybos staklės, su 2 gręžtuvais ir dviem dešiniais bei vienu kairiuoju profiliavimo velenais, gamina tiesioginius langus 68, 88 ir 130 mm storio. Pristatymas pagal susitarimą. Dujdpfx Afjtp Dngofsp

Būklė: naudotas, Gamybos metai: 2007, Tipas 1B/1K-M Maks. ruošinio ilgis: 5000 mm Maks. ruošinio plotis: 300 mm Dusdeitvdnopfx Affop Pjovimo gylis: 180 mm Maks. darbinis aukštis 1/Maks.: 20 mm Variklių skaičius: 2/380 V; 50 Hz Suslėgto oro slėgis: 6 bar Pagaminta Italijoje, 2007 m. Transportavimo matmenys: 4200 x 2000 x 2400 mm Svoris: 2000 kg Kaina: 4900 Eur (EXW Jonava, Lietuva)

Būklė: naujas, Automatische Stemmmaschine mit 3 Köpfen Arbeitstischmaße: 3000 x 300 mm Gusseisenkonstruktion für maximale Stabilität 3 vertikale hydraulische Werkstückspannvorrichtungen 3 horizontale hydraulische Werkstückspannvorrichtungen Vorschubgeschwindigkeit hydraulisch einstellbar Automatischer Betrieb 3 Stemmaggregate Manuelle Verstellung auf der X-Achse mit mechanischer Arretierung Mechanische SIKO-Anzeigen für Höhenposition (Z-Achse) Doppelt exzentrischer Betrieb der Stemmaggregate (patentiertes Design) Motorleistung: 3 PS Drehzahl: 2800 U/min Dsdpfx Afjn Nv Txefsup Maximaler Abstand zwischen den 2 äußeren Stemmaggregaten: 2800 mm Minimaler Abstand zwischen den 2 äußeren Stemmaggregaten: 180 mm (Mitte zu Mitte der Stemmung) Absaugstutzen: 100 mm Hydraulikpumpenmotor: 10 PS

Būklė: geras (naudotas), Gamybos metai: 2005, Tipas 1B/1K-M Didžiausias ruošinio ilgis: 5000 mm Didžiausias ruošinio plotis: 300 mm Kaiščių išpjovimo gylis: 180 mm Dodpfx Aou Hi Trsffjup Didžiausias darbinis aukštis 1/Maks.: 20 mm Variklių skaičius: 2 / 380 V, 50 Hz Oro slėgis: 6 bar Pagaminta Italijoje, 2005 m. Transportavimo matmenys: 4200 x 2000 x 2400 mm Svoris: 2000 kg Kaina: 4900 Eur (EXW Jonava, Lietuva)

Būklė: labai geros būklės (naudotas), Working length 255 cm, drilling depth 80 cm, maximum material width 140 cm, maximum material height 16 cm, minimum chisel distance 50 cm, slotting depth 14 cm. Aggregate motors in chisel machines: 1.1 kW, drilling aggregate motor: 1.47 kW. Two pneumatic clamps. Machine dimensions: 325 cm length, 110 cm width, 235 cm height. Dujdeufwq Topfx Affep