Faneros presas

Manni prasa do forniru 3500x1300

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 3 000 mm, MANNI karšto spaudimo presas - Stalo matmenys: 3000x1300 mm - 6 cilindrų Guodpfxsx Rqtij Al Nod - Su karšto vandens katilu, kūrenamu medžio atliekomis

Būklė: naujas, Gamybos metai: 2024, Surface Planer Martin T 54 Gjdpfx Aspgkmwsl Neud Only with a high-quality surface planer can you truly achieve perfect foundations. The T 54 was developed with precisely this aim in mind. It enables you to dress workpieces easily at the most modern level and safely machine them with four-sided edges. The machine comes standard with a TERSA all-steel cutterblock. The Xplane cutterblock with a pulling cut is available as an optional extra. Chamfering is effortless thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The solid cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require more support area, both the infeed and outfeed tables can each be extended by 380 mm – of course, these extensions are also made of cast iron. Technical data: Table width: 500 mm Table length: 2840 mm Max. cutting depth: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorised table adjustment Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock 4 knives Location: In stock at 54634 Bitburg - Available immediately -

Gamybos metai: 1984, būklė: geras (naudotas), Das auf dem Tisch befindliche, rot markierte Teil liefert nicht mit. Guodpfjlz Izlsx Al Ned

Būklė: labai geros būklės (naudotas), Steton PF530 E. Electric adjustment of planing height - Working width: 53 cm - TERS cutter block Gsdoipx Uqepfx Al Njud - Table length: 275 cm - Motor power: 4 kW / 380 V - Fence adjustable at an angle - Electric brake The machine is in very good condition, operates smoothly.

Būklė: naujas, Table size: 2500 x 780 mm Motor power: 7.5 kW Spindle diameter: as required mm Speed(s): 1,500 - 10,000 rpm FIMAL Tilting Spindle Moulder TX 160 L --- 4-axis control: spindle height, tilt, parallel adjustment of the fence, and adjustment of the motorised table insert, including upper control panel with automatic star-delta startup for the milling motor. Touchscreen, tool management and program control based on Windows Milling fence includes controlled parallel adjustment (1st axis), handwheel adjustment with digital display for front fence jaw, electrical traverse and tilting unit for the entire fence, quick-release lever for locking, aluminium fence jaws and pressure device Controlled electromechanical spindle height adjustment (2nd axis) Controlled electromechanical spindle tilting adjustment (3rd axis): -45° to +45° Gujdpexpi D Iofx Al Ned Table insert adjustable to match milling tool diameter (instead of table insert rings) Motorised control of the table insert (4th axis) Milling speeds: 1500/3000/4500/6000/8000/10000 rpm (displayed via touchscreen) Electrics and safety devices according to CE standards Table dimension: 1200 x 780 mm Max. tool size under the table: d = 320 mm, H = 50 mm Motor: 7.5 kW / 10 HP / 50 Hz Version "L" with double-sided table extension and pull-out workpiece support with emergency stop button Right/left rotation according to CE Curved fence Option at extra cost: 4-roller power feed type VSA 2048 L Constant feed speed without loss of power Forward and reverse operation Including stand, individually tiltable and adjustable for horizontal and vertical use Eight speeds available, speed selection via switch and change gearbox Extra charge: €1,149.00 Freight charges, including installation and 4 hours of instruction: Surcharge: €1,400.00 (technical data according to manufacturer – no guarantee)

Būklė: geras (naudotas), Gamybos metai: 2002, veikimo valandos: 123 h, Funkcionalumas: nepatikrintas, šildymo galia: 350 kW (475,87 AG), Mawera Type FU350RIA, fully automatic wood-fired boiler, underfeed stoker system, output: 350 kW. Hot water system, maximum flow temperature: 95°C, year of manufacture: 2002. Components: Boiler body with combustion chamber and heat exchanger, automatic feed screw, multicyclone dust separator, flue gas fan with ductwork up to the chimney, operating manual, logic control system. Already dismantled. Inspection possible by prior appointment in Budapest. Gsdpfxewa Ax As Al Nsud

Būklė: naujas, Tipas: DC9030 Oro tiekimas: 3900 m³/val. Įleidimo angos skersmuo: 3 × 100 mm Ventiliatoriaus skersmuo: 300 mm Maišo talpa: 307 l Surinkimo maišas: Ø 480 × 4 3 fazės Gsdpfxsfiiwuo Al Nsud Variklio galia: 2,2 kW Svoris: 63 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 1995, šildymo galia: 200 kW (271,92 AG), Siūlome žinomos Austrijos įmonės BINDER šildymo įrenginį. Katilas su 200 kW šilumos galia. Tipas RRK 150. Krosnis biomasėi, žievei, skiedroms ir pjuvenoms. Pilnas komplektas su siurbliais ir vožtuvais. Gsdpfxsxalfie Al Neud

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, galia: 5,5 kW (7,48 AG), obliavimo plotis: 410 mm, įrankio skersmuo: 125 mm, peilių skaičius: 4, sukimosi greitis (maks.): 5 000 aps./min, obtotalinė obliavimo stalų ilgis: 2 850 mm, TECHNICAL DATA Planing width: 410 mm Infeed table length: 1620 mm Outfeed table length: 1170 mm Total table length: 2850 mm Cutterhead speed: 5,000 rpm Extraction port diameter: 160 mm Maximum chip removal: 8 mm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 870 kg Gujdpjqk Ulusfx Al Njd TECHNICAL DESCRIPTION Robust German engineering For jointing and edge planing, including concave and convex joint adjustment for planing widths up to 630 mm and max. chip removal up to 8 mm Ergonomic working position directly at the cutterhead PANHANS solid steel cutterhead ø 125 mm with 4 Tersa reversible knives Finely planed machine tables, total table length 2850 mm Control panel positioned at eye level with digital readout for chip removal, current outfeed table setting (neutral, concave, or convex joint), including template holder and practical tool tray Electromotive adjustment of the infeed table via push button Concave and convex joint adjustment at the outfeed table Toothed table lips for noise reduction Fence depth and tilt adjustment via single-lever operation, tiltable up to 45°, mounted in an ultra-smooth steel guide Anodized fence bar Swivelling auxiliary fence 1545 Console for power feed unit Bridge guard TXF 1570 with foldable cover Mechanical motor brake Automatic star-delta start, motor protection switch Factory-calibrated CE-compliant GS certified

Būklė: naujas, Typ R-RP630 Arbeitsbreite: 630 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe/-dicke: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 20,25 kW Motorleistung erste Aggregateinheit: 11 kW Motorleistung zweite Aggregateinheit: 7,5 kW Vorschubmotor: 1,5 kW Hubmotor: 0,25 kW Durchmesser erste Walze: 190 mm Durchmesser zweite Walze: 190 mm Schleifbandabmessung: 650 x 1920 mm Arbeitsluftdruck: 0,6 MPa Absauganlagenvolumen: 8.000 m³/h Transportabmessungen (LxBxH): 1.900 x 1.200 x 2.100 mm Gewicht: 1.200 kg Gsdpfx Alsdflp Ie Njud