Keltuvas

Manitou TJ280

Būklė: naudotas, Gamybos metai: 2025, bendras ilgis: 11 350 mm, - Working height: 27.73 m - Platform height: 25.73 m - Max. outreach: 21.45 m - Vertical rotating basket arm (up / down): +56.80° / -62° - Basket load capacity / maximum basket load: 240 kg / 350 kg - Upper carriage rotation: 360° Dsdpfx Aaey Nfldsijwa - Basket rotation (right / left): 90° / 90° - Permitted number of persons (indoor / outdoor): 3 / 2 - Counterweight offset (upper carriage at 90°): 1.43 m - Counterweight dimension / outreach: 1.45 m - External turning radius: 4.35 m - Travel speed – transport mode: 4.50 km/h - Travel speed – work mode: 0.80 km/h - Gradeability: 35% - Permitted inclination in work mode: 4° - Tires: Solid rubber, vulcanized - Drive wheels (front / rear): 2 / 2 - Steering wheels (front / rear): 2 / 2 - Braked wheels / wheels: 2 / 2 - Manufacturer / engine model: Yanmar - 4TNV88C - Engine emissions standard: Stage V - Rated engine power / output: 46 hp / 34.30 kW - Ground pressure: 21.30 dan/cm² - Hydraulic flow rate – hydraulic pressure: 400 bar - Hydraulic tank capacity: 94 l - Fuel tank capacity: 76 l - Ambient noise (LwA): < 106 dB - Hand/arm vibration exposure: < 0.50 m/s²

Būklė: naudotas, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Maximum spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor system KNOLL VRF 500 Dwjdpfx Aaeuhauyoisa - Workpiece evacuation with conveyor at position 6

Būklė: naudotas, Gamybos metai: 2022, bendras ilgis: 11 360 mm, - Darbo aukštis: 27,73 m - Platformos aukštis: 25,73 m - Maksimalus šoninis pasiekimas: 21,45 m - Kėlimo platformos sukamojo mechanizmo kampas (viršuje/ant žemės): +56,80° / -62° - Kėlimo platformos maksimali apkrova: 350 kg - Viršutinės konstrukcijos pasukimas: 360° - Žmonių skaičius (viduje/lauke): 3/2 - Kėlimo platformos svoris: 16 500 kg - Kėlimo platformos matmenys: 2,30 x 0,90 m - Teleskopinio strėlės ilgis sulankstytoje / išskleistoje būsenoje: 2800 mm / 4300 mm - Kontrsverčio atstumas (viršutinė konstrukcija 90° kampu): 1,43 m - Vidinis posūkio spindulys: 1,97 m - Išorinis posūkio spindulys: 4,35 m - Važiavimo greitis transportavimo režimu: 4,50 km/h - Važiavimo greitis darbo režimu: 0,80 km/h - Didžiausias įkalnės įveikimo kampas: 40 % Dwedpfx Asztghrjaiea - Leidžiamas pakrypimo kampas darbo režimu: 4° - Padangos: vientisos gumos padangos, vulcanizuotos - Varomieji ratai (priekiniai/galiniai): 2/2 - Vairuojami ratai (priekiniai/galiniai): 2/2 - Stabdyti ratai / ratai: 2/2 - Variklio gamintojas: Yanmar - Modelis: 4TNV88C - Vardinė galia (vidaus degimo variklis) / galia (kW): 46 AG / 34,3 kW - Slėgis ant žemės: 21,30 dan/cm² - Hidraulinis slėgis: 400 bar - Hidraulinio bako talpa: 94 l - Kuro bako talpa: 76 l - Aplinkos triukšmo lygis (LwA)

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, galia: 34 kW (46,23 AG), keliamoji galia: 350 kg, tuščias svoris: 16 500 kg, statybinis aukštis: 2 730 mm, kuro tipas: dyzelinas, bendras ilgis: 8 009 mm, pavaros tipas: Diesel, rankos pasiekiamumas: 21 450 mm, statybos plotis: 2 480 mm, darbinio aukščio: 27 730 mm, Teleskopinė darbo platforma Būklė: Naujas įrenginys Techninė būklė: Nauja Priekinių padangų tipas: Kietos gumos Galinių padangų tipas: Kietos gumos Dwodpfx Aaezrcw Hsisa Visų ratų pavara / vairavimas, spalvotas ekranas, LED švyturys.

Būklė: paruoštas naudoti (naudotas), Rotary transfer center RT100/12-26 Manufacturer: Pfiffner Serial number: 1101141101 Operating hours: 42,500 Footprint: 14m x 8m Dwodpfx Aaji Ewn Eeioa

Būklė: naudotas, Gamybos metai: 2025, bendras ilgis: 11 350 mm, - Working height: 27.73 m - Platform height: 25.73 m - Max. outreach: 21.45 m - Vertical rotating basket arm (up / down): +56.80° / -62° - Basket load capacity / maximum basket load: 240 kg / 350 kg - Upper carriage rotation: 360° - Basket rotation (right / left): 90° / 90° - Permitted number of persons (indoor / outdoor): 3 / 2 - Counterweight offset (upper carriage at 90°): 1.43 m - Counterweight dimension / outreach: 1.45 m - External turning radius: 4.35 m - Travel speed – transport mode: 4.50 km/h - Travel speed – work mode: 0.80 km/h Dwodpfx Aaozpbppoioa - Gradeability: 35% - Permitted inclination in work mode: 4° - Tires: Solid rubber, vulcanized - Drive wheels (front / rear): 2 / 2 - Steering wheels (front / rear): 2 / 2 - Braked wheels / wheels: 2 / 2 - Manufacturer / engine model: Yanmar - 4TNV88C - Engine emissions standard: Stage V - Rated engine power / output: 46 hp / 34.30 kW - Ground pressure: 21.30 dan/cm² - Hydraulic flow rate – hydraulic pressure: 400 bar - Hydraulic tank capacity: 94 l - Fuel tank capacity: 76 l - Ambient noise (LwA): < 106 dB - Hand/arm vibration exposure: < 0.50 m/s²

Būklė: naudotas, Gamybos metai: 2019, veikimo valandos: 2 920 h, keliamoji galia: 240 kg, stiebo tipas: teleskopinis, kuro tipas: dyzelinas, Pagaminimo metai: 2019 Svoris be apkrovos: 16 500 kg Didžiausia leidžiama bendra masė: 16 740 kg Matmenys (ilgis x plotis x aukštis): 1135 x 243 x 272 cm Darbinis aukštis: 2775 cm Djdpfxexb Ay To Aaiowa

Gamybos metai: 1987, būklė: naudotas, mašinos/transporto priemonės numeris: 7.0176, Note: We have 6 units of this machine in stock! Manufacturer: Gildemeister Model: GS 36 – 6 A/C Dwedpfx Aaein Ub Toiea Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11 t General / technical data: Portal 6-spindle automatic lathe Spindle pitch circle: 300 mm Number of longitudinal slides: 6 Number of cross slides: 2 Max. cross slide travel: 60 mm Max. longitudinal slide travel: 125 mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Infinitely variable 1.95 – 78 seconds Secondary time range: 0.79 – 2.13 seconds Drive power: DC spindle motor 20 kW; feeds 8 kW Installation area: approx. 1720 x 4700 mm Note: The machine cannot be converted for bar work. Equipment: – 1 creep speed drive for setup operation – 1 automatic central lubrication system – 1 coolant system with piping and pump – 1 facing slide, position 3 (without cams) – 1 facing slide, position 5 – 6 longitudinal slides (without drive, without cams) – Feed for independent longitudinal slide, flexible, position 1–6 – Programmable logic controller IPC 620 – Noise protection measures 80db – Automatic feed re-engagement with electrical interlock for side door – Hinge belt chip conveyor – Machines equipped with DC drives for spindle speed and feed – KIENZLE terminal 2450-07 with signal interface and data transmission control Accessories: Electrical configuration: The electrical equipment consists of a direct current main drive with 20 kW output for the spindle and a three-phase servomotor for the feed drive with an output of 8 kW (protection class IP 54), as well as the appropriate switching and control devices and all required installation. Total connected load of the machine: 32 kW/h.

Būklė: naudotas, Gamybos metai: 2019, veikimo valandos: 1 464 h, Funkcionalumas: visiškai funkcionalus, tuščias svoris: 16 650 kg, kuro tipas: dyzelinas, kėlimo aukštis: 27 730 mm, pavaros tipas: Diesel, statybos plotis: 2 480 mm, Articulating boom lift Technical condition: very good Front tyres type: solid rubber Front tyres condition: 80 - 100% Rear tyres type: solid rubber Rear tyres condition: 80 - 100% Battery condition: 80 - 100% CE certificate, Dwedpfx Aovgh S Nsaiea Climbing ability: 40% Travel speed - transport mode: 4.50 km/h Travel speed - work mode: 0.80 km/h Permissible gradient in work mode: 4° Hydraulic pressure: 400 bar

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, veikimo valandos: 2 895 h, mašinos/transporto priemonės numeris: HR12674, galia: 33 kW (44,87 AG), keliamoji galia: 350 kg, tuščias svoris: 16 500 kg, statybinis aukštis: 2 750 mm, kuro tipas: dyzelinas, bendras ilgis: 11 350 mm, pavaros tipas: Diesel, statybos plotis: 2 430 mm, darbinio aukščio: 27 750 mm, Telescopic work platform Chassis number: HR12674 Condition: Ready for operation and fully functional Technical condition: normal Front tires condition: 40 - 60% Rear tires condition: 40 - 60% Description: Additional equipment available on request Dwjdpfowlw Ddjx Aaisa CE certificate,

Būklė: naujas, Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, vėsinimo galia: 22 kW (29,91 AG), įvesties srovės tipas: trifazis, aušinimo tipas: oras, bendras svoris: 341 kg, įėjimo įtampa: 400 V, bendras plotis: 780 mm, bendras ilgis: 1 870 mm, bendras aukštis: 1 450 mm, garantijos trukmė: 12 mėnesiai, Luchtgekoelde chiller MTA TAE EVO TECH 081 22 kW Koelcapaciteit: 22 kW / 6,26 ton (12/7 — 35°C) Bouwjaar: 2019 Opties: Hydraulisch module Koelmiddelcircuit: 1 st. Warmtewisselaar: Verdamper met vinnen, ondergedompeld in tank. Condensor: Koper / Aluminium Compressoren: 1 st. Copeland ZP103KCE-TFD-477 (scroll) Type koelmiddel: R410a Aantal ventilatoren: 1 st. Hydraulisch module: 1 st. waterpomp Lowara CIE120/5/D, expansievat, buffervat. Afmetingen: 1,87 x 0,78 x 1,45 m Gewicht: 341 kg Dodpfsxwcafsx Aaiowa Bedrijfsuren: 0 u Staat: Nieuw STAAT, TESTEN & GEBRUIKSKLAAR MAKEN De chiller / koudwatermachine / ondergaat zeven fasen van technische inspectie en verificatie van de bedrijfsparameters. Ook wordt het apparaat getest op ons eigen teststation, aangesloten op water (of glycol) en afgesteld volgens uw wensen. Na de test ontvangt u een gedetailleerd rapport met de prestaties en de algehele staat van de chiller. De chiller / koudwatermachine / is gereed voor transport en inbedrijfstelling. Onze technici ondersteunen u bij het berekenen van de benodigde koelcapaciteit, het selecteren van het juiste koelschema en het configureren van de benodigde uitrustingsopties. GARANTIE & SUPPORT De kwaliteit van de apparatuur wordt bevestigd met een garantie variërend van 6 tot 36 maanden. LOGISTIEK - Wereldwijde levering mogelijk - Ondersteuning bij laden, exportdocumentatie en logistieke coördinatie Vraag een uitgebreid advies aan. Foto’s, video’s en een volledig testrapport zijn op aanvraag direct beschikbaar.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, veikimo valandos: 2 359 h, galia: 34,1 kW (46,36 AG), keliamoji galia: 240 kg, stiebo tipas: teleskopinis, kėlimo aukštis: 27 750 mm, kėlimo galia: 240 kg/m, platformos ilgis: 2 300 mm, platformos plotis: 900 mm, bendras svoris: 16 550 kg, transporto ilgis: 11 360 mm, transporto plotis: 2 480 mm, transporto aukštis: 2 750 mm, kuro tipas: dyzelinas, kuro sąnaudos per valandą: 10 l/val, kuro bako talpa: 72 l, padangos dydis: 20" foam-filled terreinbanden, padang padangų: 85 procentas, ratų bazė: 2 800 mm, klirensas: 410 mm, spalva: mėlyna, Įranga: UVV saugos patikra, diferencialo užraktas, visų varančiųjų ratų pavara, === KEY SPECIFICATIONS === Year of manufacture: 2019 Operating hours: 2,359 h Working height: 27.75 m Max. horizontal outreach: 21.45 m Platform capacity: 240 kg (indoor: 350 kg) Platform dimensions (L × W): 2,300 × 900 mm Upper structure swing: 360° continuous Platform rotation: 90° / 90° Boom type: Telescopic boom lift Jib: Yes (articulating jib: +56.8° / –62°) Drive: Diesel All-wheel drive: Yes Tyres: Foam-filled off-road tyres Stabilisers: No Engine manufacturer: Kubota V2403-M Emission standard: Stage 3A Weight: 16,550 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verified history CE certification and complete documentation included Immediately operational and ready for transport Comprehensive technical documentation available === CONDITION === Excellent condition – fully inspected, serviced, and tested by certified professionals. Inspection possible upon request. === LOCATION & DELIVERY === Location: Sittard, Netherlands Worldwide delivery possible Price: €65,000 (EXW / plus VAT) Reliable machine from first ownership with complete service history and professional technical support. All machines are inspected, CE-certified, and immediately ready for use. Spare parts and expert support available upon request. === DELIVERY === Crane loading available upon request. Djdpjxxa E Iefx Aaiswa Flexible worldwide shipping options tailored to your logistics requirements. Transport professionally handled by the Collé Rental & Sales logistics team.