Speed-Tech Equipment Horizontal Cardboard Baler pirkti naudotą (67 583)

Būklė: naudotas, Speed-Tech Equipment horizontali kartono presavimo mašina, ryšuliai apie 1200 lbs (544 kg), ryšulio matmenys: 6' (183 cm) ilgio x 36" (91 cm) pločio x apie 28" (71 cm) aukščio, trifazė, veikianti, laimėtojas atsako už tinkamą išmontavimą. Iasdpfx Aoxd D Nzobvst

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, veikimo valandos: 44 590 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 200 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 2 000 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, alyvos bako talpa: 3 100 l, galia: 150 kW (203,94 AG), paskutinio kapitalinio remonto metai: 2025, Technical Data - Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Type: 112 Year of manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours as of December 2025 Main press force: 200 t Specific pressing force: 16.5 kg/cm² Feed chute dimensions: 2,000 x 1,020 mm Filling volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length adjustable Drive power: 2 x 75 kW Iedpjx Dnb Ujfx Abvjat Binding: 5-fold horizontal, fully automatic Throughput for MSW: approx. 48 to 54 t/hour, depending on material Hydraulic oil tank capacity: 3,100 L Machine weight, press: approx. 50.8 t Scope of delivery: 1 unit baler MACPRESSE, type 111A 1 unit operating manual with CE declaration, electrical and hydraulic schematic Remarks: The machine has been serviced and partially overhauled in our workshop. The following work was performed and parts replaced: • Hydraulic oil tank completely drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantling of the press ram, complete disassembly, overhaul of the mechanics • Replacement of the front two main guide rollers • Replacement of the knives on the press ram • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, all seals replaced • Replacement of the counter knife in the frame • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame renewed on left and right sides • Worn press floor cut out, bottom plate replaced with wear-resistant HARDOX steel • Dismantling of the tying and twisting unit, complete disassembly, overhaul of the mechanics, replacement of all twister shafts and ball bearings • Replacement of all wire rollers in the needle heads • Wire cutters cleaned and reset, chains lubricated and tensioned • All wire deflection pulleys made operational • All door contact switches replaced • Vibulator dismantled, disassembled and serviced • General maintenance performed Finally, the baler was subjected to a machine test in both manual and automatic modes—see our video for a functional test of the machine. The documentation (operator manual, CE, electrical/hydraulic schematic) is complete. Viewing by appointment is possible. No liability is assumed for the technical specifications or possible errors.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2015, balo svoris: 480 kg, Markė: HSM Modelis: V-press 860 plus Pagaminimo metai: 2015 Presavimo jėga: 418 kN Įtampa: 400 V Maks. ryšulio svoris: 480 kg (priklauso nuo medžiagos) Ryšulio matmenys: 120 x 120 x 78 cm Įrenginio svoris: 2083 kg Įrenginio matmenys: 180 cm x 125 cm x 298,5 cm Užpildymo angos matmenys: 120 cm x 65 cm Būklė: labai gera! Patikrinta veikla. Iasdpoy Nizcefx Abvet Vaizdo įrašas veikiant įrenginiui pateikiamas pagal pageidavimą. FLITS Rental & Sales paslauga: prie kiekvienos mašinos pridedame vieną ryšimo vielos ryšulį (120 vielų). Reikia daugiau ryšimo vielos ryšulių? Paprašykite pasiūlymo.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: PVF468787, spaudimo jėga: 30 t, įėjimo įtampa: 400 V, balo svoris: 300 kg, bendras plotis: 1 775 mm, bendras aukštis: 3 225 mm, bendras svoris: 1 570 kg, bendras ilgis: 1 025 mm, pildymo angos plotis: 1 200 mm, pildymo angos ilgis: 560 mm, triukšmo lygis: 63 dB, ryšulio plotis: 1 200 mm, kamuolio ilgis: 800 mm, ryšulio aukštis: 950 mm, transporto aukštis: 2 300 mm, elektrinė saugiklis: 16 A, Naudotas BRAMIN B30 plastiko / kartono presas labai geros būklės, paruoštas eksploatacijai Presas tipas B30 VD/HS su stumdomomis durimis ir didelio greičio funkcija, įskaitant BRA-IN Spaudimo jėga: 30 t Įkrovimo anga (plotis x aukštis): 1200 x 560 mm Elektra: 400 V / 4,0 kW / 16 A Triukšmo lygis: apie 62-64 dB Darbo ciklo trukmė: 35 s Presavimo kamera aukšta: 1560 mm Ilgas stūmoklio eiga: 750 mm Išoriniai matmenys (P x G x A): 1775 x 1025 x 3225 mm Transportavimo aukštis: apie 2770 mm Mašinos svoris: apie 1570 kg Iodpfx Aboy Nnclevjat Balių matmenys (P x G x A): 1200 x 800 x 950 mm Balių svoris: apie 280-400 kg (priklauso nuo medžiagos) Pardavimas tik juridiniams asmenims, be garantijos.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, balo svoris: 550 kg, bendras plotis: 1 570 mm, bendras aukštis: 2 985 mm, bendras svoris: 2 403 kg, bendras ilgis: 1 800 mm, pildymo angos plotis: 1 195 mm, pildymo angos ilgis: 65 mm, ryšulio plotis: 110 mm, kamuolio ilgis: 120 mm, ryšulio aukštis: 120 mm, transporto aukštis: 225 mm, Gamintojas: HSM Modelis: V-Press 1160 plus Gamybos metai: 2009 Iaedsy Iwi Ejpfx Abvet Presavimo jėga: 532 kN Įtampa: 400 V Maks. rulono svoris: iki 550 kg (priklausomai nuo medžiagos) Rulono matmenys: 120 x 110 x 120 cm Įrenginio svoris: 2403 kg Įrenginio matmenys: 180 x 157 x 298,5 cm Užpildymo angos matmenys: 119,5 x 65 cm Būklė: labai gera! Vaizdo įrašas su veikiančiu įrenginiu prieinamas pageidaujant.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 30 t, Used Bramidan B30 baler. Newly repainted. Ready for use, fully equipped, in perfect working condition. New oil. Iodpfeviymwsx Abvsat

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bendras svoris: 270 kg, garantijos trukmė: 24 mėnesiai, tuščias svoris: 265 kg, Robust and compact design High-quality components for extended service life Above-average productivity Iodpfx Asu Tqmdebveat Adjustable bale height (three sizes) Automatic start for efficient compaction Bale trolley for easy transport Material selection for cardboard and plastic Full bale and service indicators Compliance with EN 16500:2014 safety standards

Būklė: naudotas, Gamybos metai: 2013, bendras aukštis: 2 240 mm, bendras ilgis: 5 240 mm, bendras plotis: 2 500 mm, Unladen weight: 2,700 kg - Year of manufacture: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate available: No - Serial number: AA1/017355 - Number of milling spindles [pcs]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs]: 3 - - Max. spindle speed [rpm]: 24,000 - - Main motor power [kW]: 9.5 - Type of router table: Beam table - Drilling unit included: Yes - └ Horizontal drilling spindles [pcs]: 6 - └ Vertical drilling spindles [pcs]: 12 - Sawing unit included: Yes - System/software: SCM Maestro - Working area X [mm]: 3050 - Working area Y [mm]: 1250 - Z-axis working range [mm]: 1810 - Y-axis maximum stroke [mm]: 1550 - Voltage [V]: 400 - Power consumption [A]: 31 - Transport dimensions: 5240mm x 2500mm x 2244mm (L x W x H) - Transport weight [kg]: 2700 kg - Transport packages [pcs]: 1 Financial Information VAT: The stated price is net of VAT VAT/margin scheme: VAT is deductible for businesses Delivery and trade-in possible at any time for all types of industrial equipment Glenn Smeets Ijdpfx Ajwnii Robvsat

Būklė: naudotas, Gamybos metai: 2014, What are Presale items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines solely based on photos and are selling them with the information provided in the listing. Unfortunately, we do not have any additional details, such as exact dimensions or precise machine specifications. Furthermore, these machines are often not in stock yet and have not been inspected by us. These machines are offered at attractive prices, meaning the prices are lower than usual, but the full risk is borne by the buyer. Please review the information in the listing carefully before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-03-30 - Year of construction: 2014 - Documentation available: Yes - CE certificate available: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs]: 1 - Milling spindle 1: - Number of controlled axes [pcs]: 5 - Type of router table: beam table - Tool clamping system: HSK-F63 - Drilling tool available: Yes - Tool changer positions [pcs]: 12 - System/software: SCM Maestro Iodpsx Hwhxofx Abveat - Safety features: safety light curtain, safety fence - Vacuum pump included: Yes - Quantity [pcs]: 1 - Brand: Becker - Type: VTLF 2.250/0-791 - Year of construction: 2014 - Main motor power [kW]: 5.5 - Capacity [m³/h]: 244 - Vacuum [bar]: 200 - CNC options: Handheld control - CNC documentation available: USB stick - Working area X [mm]: 5200 - Working area Y [mm]: 1550 - Z-axis working area [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 Financial Information VAT: The indicated price is exclusive of VAT VAT/margin taxation: VAT is deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Glenn Smeets

Būklė: geras (naudotas), Gamybos metai: 1998, Smulkintuvas su horizontaliu padavimu ir konvejeriu budėjimo režime. Lėto veikimo, todėl labai tylus. Maks. plotis: 300 mm. Maks. aukštis: apie 30 mm. Variklis: 18,5 kW, 115 aps./min. Idealu naudoti šalia plokščių pjūklo ilgoms juostoms. Iasdpsgmn Amofx Abvet

Būklė: naudotas, Gamybos metai: 2012, spaudimo jėga: 4 t, Used HSM V-Press 504 Baler The HSM V-Press 504 vertical baler is a compact yet highly efficient machine designed for compressing cardboard and foil waste. Thanks to its robust construction, user-friendly operation, and modern control system, this model is an ideal solution for manufacturing companies, warehouses, retail stores, or logistics centers that generate substantial amounts of packaging waste daily. Manufactured by the renowned German brand HSM, the baler ensures reliable performance and a long service life. Key advantages of the waste paper baler: - 40 kN pressing force – effective compression reduces waste volume by up to 95%. - Efficiency and ergonomics – the compaction process starts automatically when the door is closed, and the ram returns to its starting position automatically. - Modern control system – microprocessor control with a membrane keypad and graphic text display provides easy monitoring of the working process. - Double doors with lever – safe and convenient operation, even for intensive use. Iodpfjyim Ayex Abvsat - Compact bales up to 60 kg – easy to transport and store processed waste. - Integrated bale ejector – increases operator safety and comfort. - Energy-efficient operation – 1.1 kW motor offers full functionality with low energy consumption. - Stable, durable construction – ensures reliability over prolonged use. Offer details for the HSM V-Press 504 waste paper baler: - Product code: MTP006524 - Condition: used - Year of manufacture: 2012 - Model: V-Press 504 - Width: 102 cm - Depth: 81.5 cm - Height: 193 cm - Weight: 290 kg - Power: 1100 W - Voltage: 230 V Net price: €2,859.00 per unit * I have a large stock; price negotiable for bulk orders. * Delivery available throughout Europe. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The BTS-MF40 is the ideal baler for compacting your loose cardboard and plastic film waste into bales of up to 40 kg. This baler impresses with its simple and safe operation, making it perfect for low material volumes and producing compact, easy-to-handle bales. By compressing these waste/recyclable materials, you achieve up to 90% volume reduction, significantly lower your disposal costs, and properly return materials to the recycling stream. Pressing force: 2 tons Bale weight: up to 40 kg (depending on material) Bale size: 600 H (variable) x 535 W x 460 D mm Machine dimensions: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Filling opening: 522 W x 490 H mm Pressing time: 20 seconds Motor: 1.5 kW, 13 Amp Power supply: 220 - 240 V (single phase) Noise level: 68 dB User-friendly lever operation Bale trolley for easy bale removal Retainer to minimize material spring-back Strapping band holder Iajdpfxovahude Abvst A quality product “Made in Europe” Suitable for compacting: - Cardboard - Plastic film - Cans and light metal containers - Canisters and light plastic containers - Clothing - Light recyclables Additional options: - Annual maintenance with safety inspection (UVV) - Machine color per RAL code - Can press insert - Automatic control system with auto press cycle - Strapping bands - Power supply 380 - 400 V (3 phase) Baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, waste press, recyclable material press, waste compactor, garbage press, residual waste press

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The BTS-MF40 is the ideal baler for compacting your loose cardboard and film waste into a bale of up to 40 kg. The baler stands out due to its simple and safe operation, making it optimal for small material volumes and producing compact and easily manageable bales. By compressing these waste/recyclable materials, you achieve up to 90% volume reduction, significantly lower your disposal costs, and properly return the material to the recycling cycle. Pressing force: 2 tons Bale weight: up to 40 kg (material-dependent) Bale size: 600 H (var.) x 535 W x 460 D mm Machine dimensions: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Feed opening: 522 W x 490 H mm Pressing time: 20 seconds Motor: 1.5 kW, 13 amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever operation Ijdpfeu Iwgvjx Abvjat Bale trolley for removing the bales Retention claws to reduce material spring-back Holder for two rolls of strapping tape A quality product "Made in Europe" Suitable for compacting: Cardboard Film Cans and light metal containers Canisters and light plastic containers Clothing Light recyclables Additional options Annual maintenance with UVV inspection Machine color according to RAL Can crusher insert AUTO control with automatic press cycle Strapping tapes Power supply 380 - 400 V (3 phase) Baler, paper baler, waste paper baler, cardboard baler, cardboard press, film press, paper bale press, waste baler, waste compactor, recycling press, refuse compactor, refuse press, municipal waste press

Būklė: geras (naudotas), Manufacturer: Comp Model: SB5 Motor: 2.2 kW Piston stroke: 500 mm Iajdoh Eic Aepfx Abvjt Chamber size: 500 x 350 x 400 mm

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF450 is the ideal baler for compacting your loose cardboard and film waste into a bale weighing up to 450 kg. This baler impresses with its simple and safe operation as well as its large feed opening, making it perfect for handling high volumes of material. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly cut your disposal costs, and return the material properly into the recycling stream. Pressing force: 30 tons Bale weight: up to 450 kg (material-dependent) Bale dimensions: 1000 H (variable) x 1200 W x 800 D mm Machine dimensions: 3000 H x 1781 W x 1196 D mm Machine weight: 1300 kg Transport height: 2300 mm Feed opening: 1200 W x 680 H mm Press cycle time: 40 seconds Motor: 5.5 kW, 16 Amp Power supply: 380 – 400 V (3-phase) Noise emission: 68 dB Double-cylinder system for even material compaction User-friendly lever operation Bale ejector for easy removal of bales Retaining claws for minimizing material spring-back Bracket for securing strapping A quality product ‘Made in Europe’ Suitable for compacting: - Cardboard - Film - Big bags Isdovamafopfx Abveat - Clothing - Light recyclables Additional options: - Annual maintenance and safety inspection (UVV test) - Machine color available in RAL - PLC control with automatic press cycle, bale-ready indicator, and E-stop with key switch - Vertical door - Strapping bands - 11 kW / 32 Amp motor option Keywords: baler, cardboard baler, waste baler, paper baler, cardboard press, film baler, waste compactor, refuse press, recycling press, residual waste press

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Baler BTS-MF75 in stock and available for immediate delivery The BTS-MF75 is the ideal baler for compacting your loose cardboard and film waste into bales weighing up to 75 kg. With an additional pressing insert, it is also suitable for compressing individual metal and plastic containers as well as cans. The baler impresses with its simple and safe operation and large loading volume. By compacting these waste and recyclables, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and ensure proper return of the material to the recycling loop. Pressing force: 3.5 tons Bale weight: up to 75 kg (depending on material) Bale size: 1000 H (variable) x 700 W x 500 D mm Machine dimensions: 2335 H x 1040 W x 750 D mm Machine weight: 278 kg Transport height: 2335 / 1800 mm (if required) Loading opening: 700 W x 698 H mm Pressing cycle: 24 seconds Iasdpovah S Aefx Abvot Motor: 1.5 kW, 13 Amp Power supply: 230 V (single phase) Noise emission: 68 dB User-friendly lever operation Bale trolley for easy removal of bales Retainer to reduce material spring-back Strapping holder A quality product 'Made in Europe' Suitable for compacting: Cardboard Film Cans and lightweight metal containers Canisters and lightweight plastic containers Textiles Lightweight recyclables Additional options: Annual maintenance with safety inspection (UVV) Machine colour selectable according to RAL Can pressing insert PLC control with automatic press cycle, bale-ready signal, and key-operated E-stop Belt bale ejector + PLC (instead of bale trolley) Strapping bands Power supply 380 – 400 V (three phase) Baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, waste press, recycler press, waste compactor, refuse press, residual waste press

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF200MK is the ideal multi-chamber baler for compacting your loose cardboard and film waste into a bale weighing up to 200 kg. Different materials can be collected in two or more press chambers arranged side by side. Once a chamber is filled, the mobile press head is rolled over and the material is compressed. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and properly return the material to the recycling cycle. Pressing force: 16 tons Bale weight: up to 200 kg (depending on material) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine dimensions: 2506 H x 3260 W x 1269 D mm Machine weight: 1,400 kg Transport height: 2506 mm Feed opening: 1100 W x 800 H mm Pressing time: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale ejector for removing the bales Return retainers to minimize material spring-back Short handling time as one chamber is always free for loading Holder for strapping bands A quality product “Made in Europe” Suitable for compacting: Cardboard Films Big bags Textiles Light recyclables Additional options: Annual maintenance with UVV inspection Machine color according to RAL PLC control with automatic press cycle, bale-ready indicator and E-stop with key Additional press chamber (up to 6 chambers total) Strapping bands Ijdpfxeva Hupj Abveat Power supply 380 - 400 V (3 phases) Twin-chamber baler, baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, refuse press, recycling press, waste compactor, waste press, residual waste press

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF300LH is the ideal baler for compacting your loose cardboard and film waste into bales of up to 300 kg. Thanks to its compact design, it is particularly suitable for areas with limited ceiling height. The baler impresses with its simple and safe operation, as well as its large feed opening. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and ensure the material is properly returned to the recycling loop. Isdpfx Ajiwgcmebvsat Pressing force: 20 tons Bale weight: up to 300 kg (material-dependent) Bale size: 1100 H (variable) x 1200 W x 800 D mm Machine dimensions: 1986 H x 1800 W x 1100 D mm Machine weight: 1140 kg Transport height: 1986 mm Feed opening: 1200 W x 600 H mm Press cycle: 45 seconds Motor: 2.2 kW, 16 amps Power supply: 220 - 240 V (1 phase) Noise level: 68 dB PLC control with automatic press cycle, bale-ready indicator, and emergency stop with key Strap bale ejector for easy bale removal Retention claws to minimize material spring-back Low overall height, ideal for spaces with low ceilings Operating hours counter Holder for strapping bands A quality product “Made in Europe” Suitable for compacting: Cardboard Films/plastic wrap Big bags Lightweight recyclables Additional options: Annual maintenance including UVV safety inspection Machine color selectable per RAL Strapping bands Power supply 380 - 400 V (3 phase) Baler, paper baler, waste paper baler, cardboard baler, film baler, waste baler, recycling baler, compactor, refuse compactor, residual waste compactor.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF75MK is the ideal multi-chamber baler for compacting your loose cardboard and film waste into bales of up to 75 kg. Different materials can be collected in two or more press chambers placed side by side, and once a chamber is full, the movable pressing head is simply shifted over, and the material is compacted. Isdsva Hq Dspfx Abvjat By compressing these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and return the material properly to the recycling loop. Pressing force: 3.5 tonnes Bale weight: up to 75 kg (depending on material) Bale size: 700 H (var.) x 700 W x 500 D mm Machine dimensions: 2005 H x 2050 W x 872 D mm Machine weight: 562 kg Transport height: 2005 mm Feed opening: 700 W x 500 H mm Pressing cycle: 35 seconds Motor: 1.5 kW, 13 Amps Power supply: 220 - 240 V (single phase) Noise emission: 68 dB User-friendly lever control Bale trolley for easy bale removal Retaining claws to minimize material spring-back Short handling times as one chamber is always available for loading Holder for strapping bands A quality product "Made in Europe" Suitable for compacting: Cardboard Film Big bags Textiles Light recyclables Additional options: Annual maintenance with safety (UVV) inspection Machine color to RAL PLC control with automatic press cycle, bale-ready indicator, and E-stop with key Additional press chambers (up to 6 in total) Strapping bands Twin-chamber baler, paper press, waste paper press, cardboard baler, cardboard box baler, film baler, paper baler, waste baler, refuse baler, recyclables press, waste compactor, waste press, general waste press

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF500LH is the ideal baler for compacting your loose cardboard and film waste into bales weighing up to 500 kg. Due to its compact design, it is particularly suitable for areas with limited ceiling height. The baler impresses with its user-friendly and safe operation as well as its large feed opening. By compacting these waste and recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and ensure the material is properly returned to the recycling loop. Pressing force: 50 tonnes Bale weight: up to 500 kg (depending on material) Bale size: 1100 H (var.) x 1400 W x 800 D mm Machine dimensions: 2249 H x 2041 W x 1350 D mm Machine weight: 2100 kg Transport height: 2249 mm Filling opening: 1400 W x 680 H mm Pressing cycle time: 35 seconds Motor: 11 kW, 32 Amp Power supply: 380 - 400 V (3-phase) Noise level: 68 dB PLC control with automatic press cycle, bale-ready indicator, and emergency stop with key Strap bale ejector for easy removal of bales Retainer claws to minimize material spring-back Low overall height, perfect for low-clearance areas Operating hours counter Holder for 6 rolls of strapping tape A quality product “Made in Europe” Suitable for compacting: Cardboard Film Big Bags Cans and PET bottles Light recyclables Additional options: Annual maintenance with UVV inspection Custom machine color according to RAL Ijdpfxova Ekvs Abvoat Strapping tapes Baler, paper baler, waste paper baler, cardboard baler, cardboard compactor, film baler, paper bale press, waste baler, waste compactor, recyclable press, refuse compactor, bin press, residual waste baler.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The BTS-MF250 is the ideal baler for compacting your loose cardboard and film waste into bales of up to 250 kg. With a pressing insert, it is also suitable for compressing small and large drums or other metal containers. The baler stands out for its user-friendly and safe operation as well as its large feed opening. By compacting these waste and recyclable materials, you achieve a volume reduction of up to 90%, significantly cut your disposal costs, and properly return the material to the recycling loop. Pressing force: 15 tons Bale weight: up to 250 kg (depending on material) Bale size: 1000 H (variable) x 1200 W x 800 D mm Machine dimensions: 2900 H x 1759 W x 1185 D mm Machine weight: 985 kg Transport height: 2250 mm Feed opening: 1200 W x 680 H mm Pressing time: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 Phase) Noise level: 68 dB User-friendly lever operation Bale ejector for easy bale removal Retention claws to minimize material spring-back Strapping band holder A quality product "Made in Europe" Suitable for compacting: Cardboard Film Big bags Drums and metal containers Canisters and lightweight plastic containers Textiles Light recyclables Additional options: Annual servicing including safety inspection (UVV) Custom machine painting according to RAL Press insert for drums and other containers PLC control with automatic press cycle, bale-ready indication, and emergency stop with key Vertical door Iodpovalq Asfx Abvoat Strapping bands Power supply 380 - 400 V (3 phase) Baler, paper baler, waste paper baler, cardboard baler, cardboard compactor, film baler, paper bale press, waste baler, refuse press, recycling press, waste compactor, waste press, residual waste press

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The BTS-MF150 is the ideal baler for compressing your loose cardboard and film waste into bales weighing up to 150 kg. This baler stands out for its simple and safe operation as well as its large feed opening, making it optimal for medium material volumes. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly cut your disposal costs, and return the material properly into the recycling loop. Pressing force: 8 tons Bale weight: up to 150 kg (depending on material) Bale size: 1000 H (variable) x 975 W x 800 D mm Machine dimensions: 2630 H x 1560 W x 1030 D mm Machine weight: 780 kg Transport height: 1955 mm Feed opening: 975 W x 470 H mm Pressing cycle: 40 seconds Motor: 2.2 kW, 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale ejector for easy removal Retainer claws to reduce material spring-back Holding fixture for strapping bands A quality product "Made in Europe" Suitable for pressing: - Cardboard - Plastic film - Big Bags - Textiles - Light recyclables Additional options: Iasdpfxsvalkqj Abvet - Annual maintenance with safety inspection (UVV) - Machine color according to RAL - PLC control with automatic press cycle, bale-ready indicator, and E-stop with key - Vertical door - Strapping bands - Power supply 380 – 400 V (3 phases) Baler, paper baler, waste paper baler, cardboard baler, cardboard press, film baler, paper bale press, waste baler, waste compactor, recyclables press, waste compactor, refuse compactor

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Die BTS-MF100 ist die ideale Ballenpresse zur Verdichtung von losem Kartonagen- und Folienabfall zu Ballen mit einem Gewicht von bis zu 100 kg. Ausgestattet ist die Ballenpresse mit einem automatischen Presszyklus, einem Betriebsstundenzähler sowie einem Bandauswurfsystem. Das Bedienkonzept überzeugt durch einfache Handhabung, sicheren Betrieb und ein großes Einfüllvolumen. Durch das Verpressen dieser wertvollen und recycelbaren Materialien erreichen Sie eine Volumenreduzierung von bis zu 90 %, erzielen eine deutliche Kostenersparnis bei der Entsorgung und führen das Material fachgerecht wieder dem Recyclingkreislauf zu. Presskraft: 6 Tonnen Ballengewicht: bis zu 100 kg (materialabhängig) Ballengröße: 850 H (variabel) x 980 B x 800 T mm Maschinenabmessungen: 2399 H x 1440 B x 1014 T mm Maschinengewicht: 632 kg Transporthöhe: 2399 / 1876 mm (auf Anfrage) Einfüllöffnung: 980 B x 480 H mm Presszyklus: 28 Sekunden Motor: 1,5 kW / 13 Ampere Stromversorgung: 220 - 240 V (1-phasig) Schallpegel: 68 dB Ausstattung: - Automatisches Bedienfeld mit Ballenvollanzeige und Not-Aus-Schalter mit Verriegelung - Betriebsstundenzähler - Bandauswurf für einfache Ballenentnahme - Niederhalter gegen Materialrückfederung - Bandabroller für 4 Umreifungsbänder - Qualitätsprodukt „Made in Europe“ Geeignet zum Verpressen von: - Kartonagen - Folien und Kunststoffabfällen - Textilien - Leichtverpackungen Optionale Ausstattung: - Maschinenfarbe nach RAL - Umreifungsbänder - Stromversorgung 380 - 400 V (3-phasig) Iedpfx Aovaimujbvjat Typische Bezeichnungen: Ballenpresse, Papierpresse, Altpapierpresse, Kartonpresse, Kartonagenpresse, Folienpresse, Papierballenpresse, Abfall-Ballenpresse, Abfallpresse, Wertstoffpresse, Müllverdichter, Müllpresse, Restmüllpresse.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF60 is the ideal baler for compacting your loose cardboard and film waste into a bale weighing up to 60 kg. With an optional pressing insert, it is also suitable for compressing individual metal and plastic containers as well as cans. The baler stands out for its easy and safe operation and its large loading volume. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and return the material properly to the recycling loop. Pressing force: 3.5 tonnes Bale weight: up to 60 kg (material-dependent) Iaodszd Rkjpfx Abvst Bale size: 800 H (variable) x 700 W x 500 D mm Machine dimensions: 1996 H x 1040 W x 720 D mm Machine weight: 260 kg Transport height: 1996 mm Feed opening: 700 W x 492 H mm Pressing cycle time: 24 seconds Motor: 1.5 kW, 13 Amp Power supply: 220 - 240 V (single phase) Noise level: 68 dB User-friendly lever operation Bale trolley for easy bale removal Retainer to reduce material spring-back Strapping band holder A quality product "Made in Europe" Suitable for compacting: Cardboard Film Cans and light metal containers Canisters and lightweight plastic containers Textiles Light recyclables Additional options: Annual maintenance with safety inspection (UVV) Machine colour according to RAL Can press insert PLC control with automatic press cycle, bale-ready indicator, and e-stop with key Strapping bands Power supply 380 - 400 V (three phase) Baler, paper baler, waste paper baler, cardboard baler, carton baler, film baler, paper bale press, waste baler, waste press, recyclables press, waste compactor, waste press, residual waste press

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF650 is the ideal baler for compacting your loose cardboard and film waste into bales of up to 650 kg. This baler impresses with its simple and safe operation as well as its large filling volume, making it optimal for very high material throughput. By compacting these recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and ensure the material is properly returned to the recycling loop. Pressing force: 50 tonnes Bale weight: up to 650 kg (depending on material) Bale size: 1100 H (var.) x 1500 W x 1100 D mm Machine dimensions: 3217 H x 2100 W x 1524 D mm Machine weight: 1930 kg Transport height: 2500 mm Filling opening: 1500 W x 770 H mm Pressing time: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise emission: 68 dB Double-cylinder system for uniform material compaction User-friendly lever control Bale ejector for easy bale removal Retainer to reduce material spring-back Holding device for strapping bands A quality product "Made in Europe" Suitable for compacting: Cardboard Foil and plastic film Big bags Clothing Lightweight recyclables Additional options: Annual maintenance with UVV inspection Machine colour as per RAL PLC control with automatic pressing cycle, bale-ready indicator, and E-stop with key Vertical door Strapping bands Iajdpsbhxbtsfx Abvjt 11 kW 32 Amp motor Baler, compactor, waste baler, cardboard baler, cardboard compactor, film baler, paper baler, waste compactor, refuse compactor, residual waste press