Presto Gmbh & Co. Kg Cc 36 M, Su Poliesterinio Siūlo Rišimu pirkti naudotą (121 669)

Būklė: geras (naudotas), Gamybos metai: 2010, veikimo valandos: 3 641 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 36 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 080 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, galia: 15 kW (20,39 AG), tūrio srautas: 90 m³/val, Technical Data of Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Operating Hours: 3,641 hours Pressing Force (Main Press): 36 t Specific Pressing Force: 467 N/cm² Gbsdju Thh Espfx Afdjn Feed Opening Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput Under Operating Conditions (with material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Tying: 4-fold vertical, semi-automatic, with polyester plastic twine Throughput with Bulk Density of: – 35 kg/m³: 1.8 t/hour – 60 kg/m³: 2.5 t/hour – 100 kg/m³: 3.1 t/hour Transport Dimensions (press only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (press): approx. 4 t Remarks: The baler has been function-tested in our workshop, then placed in storage, and is therefore available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. An inspection is possible by appointment. We do not assume liability for any technical specifications or potential errors.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, galia: 9,7 kW (13,19 AG), Technical data for Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Year of manufacture: 2007 Throughput capacity: 130 m³/hour Speed: 37/9 rpm Motor power: 7.5 / 2.2 kW Electrical connection: 32 A Shredder interior dimensions: 1,490 x 1,320 x 530 mm (L x W x H) Shredder exterior dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine weight: 0.45 t System application: The PZA type cardboard shredder was used in a Dutch logistics center to pre-shred loose, upright cartons from the returns department before baling. Cartons were loaded manually onto the infeed conveyor and transported directly to the shredder via a sliding belt conveyor. The pre-shredded cartons were then conveyed over several hundred meters to the baling press and compacted there. Scope of delivery: 1 unit Presto Cardboard Shredder (2-shaft shredder) type PZA Remarks: The cardboard shredder was an essential part of the disposal line and was well maintained to ensure high availability for the returns department. The machine is in good condition and immediately operational. Price is per unit, ex works from our warehouse in Siddeburen, Netherlands. All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete. Inspection by appointment is possible. We accept no liability for technical data or possible errors. Godpfx Aju Tha Iofdsbn

Būklė: geras (naudotas), Gamybos metai: 2005, veikimo valandos: 15 606 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 050 mm, pildymo angos ilgis: 1 250 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 700 mm, balo svoris: 500 kg, galia: 30 kW (40,79 AG), tūrio srautas: 160 m³/val, Good day, We hereby offer you, subject to prior sale, a used baler from Presto GmbH & Co. KG, model HPK 50 B. The following technical data has been taken from the manufacturer's manual and brochures, for the accuracy and completeness of which we cannot assume any liability. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Press force (main press): 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions (with bulk density of 60 kg/cbm): approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been serviced in our workshop (main control valve on the hydraulic block replaced) and tested in ongoing operation, both in manual and automatic mode. The machine documentation is available in German. Inspection of the baler is possible by appointment at our workshop. Godjyplwfjpfx Afdobn We would be pleased if this machine is of interest to you. Your Service Team, Mertens & Frowein GmbH

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, tūrio srautas: 16 000 m³/val, galia: 15 kW (20,39 AG), Mobilus filtravimo įrenginys 15 kW, 16 000 m³/h ištraukimo galia, skirtas agresyvioms dulkėms, su prieškameros separatoriumi. Montavimas apie 10 min. Kasetinių filtrų valymas suspausto oro impulsu. 16 filtrų kasečių, 15,6 m², Bio klasė M. Dulkių surinkimas naudojant Big Bag. Filtras sudarytas iš 2 atskirų dalių, kurios surenkamos krautuvu. Jungimas atliekamas 6 greitaeigiais spaustukais ir 2 jungtimis. Prie filtro galo galima prijungti vamzdyną arba ištraukiamą žarną. Gbjdpfx Ajw Ivpvjfden

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, tūrio srautas: 16 000 m³/val, galia: 15 kW (20,39 AG), Mobilus filtravimo įrenginys 15 kW, 16 000 m³/h ištraukimo galia, skirtas agresyvioms dulkėms, su prieškameros separatoriumi. Montavimas apie 10 min. Kasetinių filtrų valymas suspausto oro impulsu. 16 filtrų kasečių, 15,6 m², Bio klasė M. Dulkių surinkimas naudojant Big Bag. Filtras sudarytas iš 2 atskirų dalių, kurios surenkamos krautuvu. Jungimas atliekamas 6 greitaeigiais spaustukais ir 2 jungtimis. Prie filtro galo galima prijungti vamzdyną arba ištraukiamą žarną. Godpfxow Ivp Ns Afdebn

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, tūrio srautas: 16 000 m³/val, galia: 15 kW (20,39 AG), Mobilus filtravimo įrenginys 15 kW, 16 000 m³/h ištraukimo galia, skirtas agresyvioms dulkėms, su prieškameros separatoriumi. Montavimas apie 10 min. Kasetinių filtrų valymas suspausto oro impulsu. 16 filtrų kasečių, 15,6 m², Bio klasė M. Dulkių surinkimas naudojant Big Bag. Filtras sudarytas iš 2 atskirų dalių, kurios surenkamos krautuvu. Jungimas atliekamas 6 greitaeigiais spaustukais ir 2 jungtimis. Prie filtro galo galima prijungti vamzdyną arba ištraukiamą žarną. Gbodpfxowxlygj Afdjn

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, 40 pėdų smėliavimo konteineris su 9 m smėliavimo zona, sraigtiniu dugnu (labai mažai priežiūros reikalaujantis), abrazyvo regeneracijos ir filtravimo sistema. Vidinės smėliavimo zonos dydis apie: Ilgis = 8850 mm, Aukštis = 2485 mm, Plotis = 2250 mm. Pasirinktinai su išplėstu pločiu iki 3240 mm. Transportavimo aukštis apie: 3000 mm. Grindų aukštis apie: 440 mm. Pasirinktys: - Šoninis konteinerio atidarymas per 9 m ir 3 m mašinų skyrius - Šoninis praplėtimas smėliavimo zonos platinimui - Lubų anga kranui (negalima su šoniniu atidarymu) - Kranas iki 500 kg ir daug kitų pasirinkimų pagal užklausą. Gbodpfx Afszbztaodon

Gamybos metai: 2006, veikimo valandos: 5 840 h, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6398921, Prašome nurodyti savo siūlomą kainą. Pardavimas tik Europos teritorijoje, įskaitant Turkiją. ----- Techninius duomenis žiūrėkite pridedamame dokumente. Be pakuotės; bet kokia garantija ar pretenzijos dėl kokybės yra atmetamos. Gbodpfx Afoy Ta Alodjn Jei įrenginį norėsite demontuoti patys, prašome tai nurodyti savo pasiūlyme. Mes neprisiimame atsakomybės už techninių duomenų teisingumą, priedų ir įrankių pilnumą, bei visų saugos ir aplinkosaugos reikalavimų, nurodytų nelaimingų atsitikimų prevencijos taisyklėse, laikymąsi.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, slėgis: 6 juosta, garantijos trukmė: 60 mėnesiai, vidinis plotis: 5 000 mm, vidinis ilgis: 10 000 mm, vidinis aukštis: 5 000 mm, filtravimo plotas: 250 m², tūrio srautas: 16 m³/val, Įranga: apšvietimas, dokumentacija / vadovas, Blast room *up to 5 years warranty* for all abrasives, constructed from steel frame/isopanels with filtration system, recirculation system, abrasive preparation, 200l pressure blasting pot with automatic refilling, blast hose with dead man control, breathing air system, LED lighting, wall lining made of 70shore 4mm fabric-reinforced rubber, sweep pit with bucket elevator. Abrasive return via sweep pit with bucket elevator, upgradeable to crosswise screw conveyor with dosing hood across full width as sweep pit or complete flat belt floor. Workpiece transport can be retrofitted: blast trolley with track bed, crane system, crane roof opening, etc. Gbodpou Ey Dlofx Afdsn For glass bead blasting of stainless steel, upgradeable with proper magnetic drawer or electrically driven magnetic drum separator. For blasting with two different abrasives (ferritic and mineral), upgradeable with magnetic drum separator, final demagnetizing stage and a second air separator for abrasive separation and cleaning. Safety features: battery emergency lighting, emergency stop buttons inside and outside the cabin, viewing window to the blast chamber, door/gate limit switches, dead man control, rapid vent pressure vessel. Up to 5 years warranty on various components. 50 years of experience and more than 3,000 systems in blast equipment engineering.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, valdymo tipas: PLC valdomas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 54 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 4 mm, Lenkimo kampas (maks.): 195 °, lenkimo spindulys (maks.): 250 mm, slėgis (maks.): 250 juosta, Įranga: CE žymėjimas, avarinis stabdymas, centralizuota tepimo sistema, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right-hand or left-hand bending. The plug-in bending tools allow for rapid changeover to different tube sizes. A rapid-action hydraulic system for reducing ancillary times is a key factor in series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers 2 operating modes: In "Simple Bending" mode, the length and rotation of the bends relative to each other are automatically displayed. In "Controlled Bending" mode, the data is pre-set and a permanent actual/target comparison is carried out during the bending process. This eliminates mispositioning within a tolerance window, thereby minimizing operator-induced error rates. General error messages are shown in full text on the large display. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for on-site installation as well as for special designs with very large tube feed, and is also available in a stationary version with a tool and mandrel rod organization system. The cost-effective alternative to fully-controlled CNC machines. POSSIBLE APPLICATION AREAS: • Hydraulics piping • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction Gbjdpfx Afjng Exaodon • Prototyping Technical Data: • Bending capacity Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radius: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control with bending angle adjustment (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer) • Maximum bending result: 180º • Weight 800–900 kg (depending on configuration) • Ergonomic operation via safety footswitch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-change chuck • Positioning of length and rotation via automatic brake function or manual stops via footswitch • Automatic positioning of length and rotation via servo motors • Pneumatic rotary stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transmission via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Welcome to test production in our in-house demo room • Advisory and consultation meeting at your location • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, valdymo tipas: PLC valdomas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 54 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 4 mm, Lenkimo kampas (maks.): 195 °, lenkimo spindulys (maks.): 250 mm, lenkimo spindulys (min.): 9 mm, slėgis (maks.): 250 juosta, garantijos trukmė: 24 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, centralizuota tepimo sistema, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries for both right-hand and left-hand bending. The interchangeable bending tools enable rapid changeovers to different tube sizes. Fast hydraulics to minimize non-productive times is a key factor for series production. Clamping pressure for tube securing is optimally adjustable. The PLC control (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and twist angles for up to 50 bending sequences on a single tube. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine offers two operating modes: In “Simple Bending,” the length and rotation of bends relative to each other are displayed automatically. In “Controlled Bending” mode, the data are input in advance, and a continuous target/actual comparison is made during bending. This excludes incorrect positioning within a specified tolerance window and thus minimizes user-related errors. General error messages are displayed in plain text on the large screen. The mandrel retraction is programmable and can be automatically retracted prematurely upon reaching the bending angle. The compact drive unit with removable mandrel support is advantageous for on-site assembly as well as for special designs requiring very long tube advance, and is also available as a stationary variant with an organized system for tools and mandrel bars. The cost-effective alternative to fully controlled CNC machines. POSSIBLE APPLICATIONS: • Hydraulic tubing • Pipeline construction • Plant construction, e.g. chemical industry • Metal fabrication • Prototype construction • Technical Data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control, bending angle adjustment (0.1°) • Mandrel support lengths 1500/3000/4500/6000 mm (special versions available longer) • Maximum bending result 180º • Weight 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops by foot switch • Semi-automatic positioning of length and rotation via servo motors • Pneumatic rotary stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping • 10-inch touchscreen with integrated tube calculation Gjdpfondn Agex Afdsbn • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Test production welcome in our in-house demo room • Consultation and information at your premises • Consulting and processing for leasing/financed purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Būklė: naujas, Gamybos metai: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal addition for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The unit can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is securely clamped onto the rotary table using the clamping device and is bent around the bending tool. With this system, leg lengths to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy in bending operations. TECHNICAL DATA: • Bending capacity steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edged tools with bending radius R2 or 5 mm Gbedpfx Asnh R Ekefdjn • Round tools R 10 to 25 mm for bends up to max. 260° optional OUR SERVICE: • Test production welcome at our facility in the demo room • Consulting and information meeting at your location • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance available at your location

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 35 mm, Vamzdžio sienelės storis (maks.): 2 mm, Lenkimo kampas (maks.): 360 °, lenkimo spindulys (maks.): 150 mm, lenkimo spindulys (min.): 32 mm, bendras svoris: 28 kg, garantijos trukmė: 12 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, kojinis nuotolinio valdymo pultas, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both stationary and directly at the assembly site, up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide robust drive force. The motor speed is automatically adjusted, resulting in rapid return motion and shorter cycle times. Position detection directly on the bending axis ensures optimal bending accuracy and extremely high repeatability. The bending angle can be set to 0.5° simply and quickly via push buttons. A large LCD display shows the angles clearly. The ability to store up to three bending angles allows efficient bending of tubes with different bending results. For transport, the compact unit with accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube and rotating tool” principle ensures a minimal footprint during bending. Sliding shoes are used for thin-walled tubes to ensure wrinkle-free bends and to achieve arcs with minimal deformation, for example, in stainless steel and copper tubes. Using the PB20 profile bending attachment, flat, square, and round bar stock can be bent with ease. POTENTIAL APPLICATION AREAS: • Hydraulic piping • Prototyping • Plumbing and heating installation • Technical data: • Bending capacity: Ø 6 to 35 mm, CU Ø 42 mm, depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation is possible • 40 mm hex shaft for quick tool changes • Safety foot switch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency converter and three-phase motor • 3 programmable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Mini bending device KBV • Special tools as required OUR SERVICE: • Welcome for test production in our in-house demo room • On-site consultation and information session Gsdpfx Afenfvx Nedobn • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your location

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME APPLICATIONS: This compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm, both stationary and directly at the installation site. Transport is possible using a pallet truck or the optional caster wheels. A robust three-phase motor and a precision gearbox provide powerful drive. The machine stands out for its compact and slim design as well as its highly accessible bending area. Position detection directly on the bending axis ensures optimal accuracy. The bending angle is set simply and quickly via a user-friendly, menu-guided touchscreen interface available in 14 languages, guaranteeing even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each with a sequence of up to 8 bends per geometry. The multifunction control allows variable speed adjustment for forward and return travel, and features a programmable overbending function to compensate for material springback. With the aid of four material characteristic curves, the material is automatically overbent to the required angle, ensuring precise results. The “stationary tube and rotating tool” principle minimizes space requirements during bending. For thin-walled tubes, sliding shoes are employed to achieve crease-free bending and to bend curves with minimal deformation, for example with stainless steel and copper tubes. The PB20 profile bending attachment allows for easy bending of flat, square, and round steel. The small-radius bending device (KBV) attachment makes extremely small bending radii possible. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Gbodpfxsndk N Ae Afdjn Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunction machine control with bending angle setting (0.1°) • Maximum bending angle: 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 model series with bending radii starting from 45 mm, includes 40 mm hexagonal shaft • PB20 profile bending attachment – for bending flat and square steel up to max. 100 x 10 mm, round steel up to max. 20 mm • KBV small-radius bending device • Special tools as per specification • Customized software for special applications OUR SERVICE: • Welcome to test production in our in-house demo room • Consultation and information session on your premises • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in for your current machine • Service contracts, on-site maintenance

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, mašinos/transporto priemonės numeris: 1018, valdymo tipas: PLC valdomas, automatizacijos lygis: vadovas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 50 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 3 mm, Lenkimo kampas (maks.): 195 °, lenkimo spindulys (maks.): 250 mm, garantijos trukmė: 24 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine, featuring a manual eccentric quick clamping system for tube fixing, allows for efficient bending operations. The compact drive unit with a detachable mandrel carrier provides advantages for use directly at the installation site. Position feedback directly on the bending axis ensures optimal bending precision. The bending angle is set quickly and easily via a user-friendly touchscreen control with a menu-guided interface. The comfort control enables two selectable speeds, as well as a parameterizable overbending function to compensate for material springback. The bending process is greatly shortened thanks to an automatic 'clear travel' at the end of the bend. For more complex bending tasks, programs can be stored, managing a sequence of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be saved on the control unit or a USB stick. Plug-in bending tools allow for quick changeover to different tube sizes. For demanding geometries, the machine's bending direction can be easily changed to right- or left-hand bending as standard. The open bending unit enables, for example, the fabrication of railing frames with only one welding seam. Optional calculation software for the PC calculates the cut length for the entire geometry and determines the feed path, twist, and bending angle for each bend. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching a certain bending angle. POSSIBLE APPLICATIONS: Gbedpfonfvy Uox Afden • Plant construction, e.g., chemical industry • Hydraulic piping • Prototype construction • Pipeline construction TECHNICAL DATA: • Bending capacity Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm/140 mm • Bending radii 2 x D • Multifunctional machine control with bending angle adjustment (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Max. 180º bend result • Weight 300-500 kg (depending on version) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital length and twist measurement (resolution 0.1) • Remote operation of all functions at the carriage (rotation and length stop) • Bending radius up to 250 mm • PC pipe calculation software OUR SERVICE: • Welcome to test production in our in-house demo room • Consulting and information sessions at your site • Consultation and processing for leasing/finance purchases via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Būklė: naujas, Gamybos metai: 2025, THE PRACTICAL HAND PIPE BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vice. The drive is operated via a screw-in handle. A lockable adjustment ring ensures repeatable bending accuracy. The interchangeable tools can be replaced with minimal effort. The 'stationary pipe and rotating tool' principle allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, allowing bends in stainless steel or copper pipes with minimal deformation. The optional version with a hexagonal drive enables use in a vice as well as the possibility to use the drive power of the bending systems 3000 and 6000. The KBV can simply be mounted onto the bending shaft of the machine. POSSIBLE APPLICATIONS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limiter Gedpfx Ajng Amkefdjbn • Maximum bending result up to 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Tool case • Length stop OUR SERVICE FOR YOU ON SITE: • Welcome to test production at our in-house demo room • Consulting and information meetings at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, THE PRECISE 3-ROLL BENDING MACHINE When developing this compact, mobile horizontal bending machine, the focus was clearly on producing dimensionally accurate spirals, such as handrails for spiral staircases. This is considered the supreme discipline, as two interdependent variables (radius and pitch) must be combined into a precise geometry in a single bending operation. The interplay of tube calculations on the PC, their implementation on the bending machine, and monitoring via measuring devices with final adjustment of bending values ensure accurate, precise bending. With just a few easy inputs into the PC tube calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power supply. Hardened steel tools and surface-friendly hard plastic tools are available. To ensure optimal feed even for tight bending radii, all three bending shafts are driven. The drive concept proves itself in demanding daily work, whether working on flat stock, bending tubes or profiles. Customers of the Bending System 4800, 5000, and 6000 can purchase the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this case, the machines function as the drive unit. POSSIBLE APPLICATIONS: • Handrails/Intermediate rails for spiral staircases • Large tube and profile bends • General metalworking TECHNICAL DATA: • Bending capacity Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Construction-site suitable 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – for controlled pitch formation • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist • MPW – PC-based calculation program for determining correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm high • Tools for special profiles OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and informational meeting at your premises Gbodpfx Ajng A R Ssfdjn • Leasing/financing purchase options • Service contracts and on-site maintenance

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, valdymo tipas: PLC valdomas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 100 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 8 mm, Lenkimo kampas (maks.): 195 °, slėgis (maks.): 250 juosta, garantijos trukmė: 24 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, centralizuota tepimo sistema, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE COST-EFFICIENT MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system provides solutions for complex geometries with standard radii of 2xD for tube diameters from 15 - 100 mm. Depending on material quality and wall thickness ratio, radii as small as 1.5xD can also be reliably achieved in series production. With a tool height of 120 mm, ample options for special profiles are available as well. The highly precise and powerful electric drive of the bending axis, along with the robust and rigid construction of the mandrel carrier and bending arm, all contribute to the desired bending results. The plug-in bending tools allow for quick changeover to other tube sizes. The clamping pressure for the tube can be optimally adjusted. The PLC control (easily expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited numbers of programs for bending angles, length dimensions, and rotational angles for up to 50 bending sequences per tube length. A freely programmable database for up to 200 materials is available to monitor springback values. The control offers two operating modes: In 'Simple Bending', the lengths and angles of the bends are automatically displayed in relation to each other. In 'Controlled Bending', the data is preset and during the bending process a continuous actual/target comparison is performed. Godponh R Suofx Afdjbn Also available with pneumatic rotary stop or with gear-assisted length and rotational positioning. POTENTIAL APPLICATIONS: • Plant construction, e.g. chemicals • Hydraulic piping • Metal construction • Prototype construction • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Min/max bending radius: 40 mm / 250 mm • Min. bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control for bending angle setting (0.1°) • Mandrel carrier lengths: 3000/4500/6000 mm • Max. 180º bend angle achievable • Weight: 1,600–3,200 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-release chucks • Larger bending radius up to 300 mm • Length and angle positioning via automatic braking system or manual stops with foot switch • Semi-automatic length and angle positioning via servo motors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Test production welcome at our in-house demo room • Consultation and information onsite at your facility • Consultation and processing for leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ON-SITE ASSEMBLY This compact and mobile bending machine enables precise and repeatable bending up to an outside diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox provide robust drive power. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is set quickly and easily via a user-friendly, menu-guided touchscreen interface, which guarantees even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each with angle sequences of up to 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and return motions, and a parametrizable overbend function compensates for material spring-back. Thanks to four selectable material curves, the material is automatically overbent to the required angle, ensuring a precise bending result. The “stationary pipe, rotating tool” principle ensures a minimal footprint during bending operations. For thin-walled tubes, sliding shoes are used to achieve wrinkle-free bends and to bend arcs with minimal deformation in materials such as stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent effortlessly. The KBV small-radius bending attachment enables extremely tight bending radii. POSSIBLE APPLICATION AREAS: • Plant engineering • Hydraulic piping • Serpentine/Meander bending • Prototype construction • Plumbing and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Bending radius min/max: 36 mm / 280 mm • Optional large bending radii up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1° increments) • Maximum bending angle: 240° • 40 mm hex shaft for quick tool changes • Safety foot switch with emergency stop • Weight: 110 kg OPTIONAL ACCESSORIES: • Profile bender PB20 – for bending flat and square bar up to max. 100 x 10 mm, round bar up to max. 20 mm • Roll bender RB43 – the RB43 mounts to the hex shaft on the bending axis. Switching to continuous bending mode transforms the system into a drive unit. • Small-radius bending attachment KBV • Special tooling according to specifications Gedpfx Aong Ax Sjfdebn OUR ON-SITE SERVICE FOR YOU: • Welcome to test production at our facility in the demo room • Consultation and information meeting at your premises • Consulting and financing/leasing arrangements • Trade-in of your current machine • Service contracts, maintenance at your location

Gamybos metai: 2024, būklė: naujas, oris- Extruder MINI ESE 20/25 D Technical Data Screw Diameter [mm]: 20 Screw Length [L/D]: 25 Screw Speed [rpm]: 20-200 rpm Screw Axial Pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency converter Drive Power [kW]: max. 2.5 Reduction Gearbox with integrated thrust bearing Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590 *) Electrical Connection Values: 3 / N / PE Supply Voltage [V]: 400 at 50 Hz Gbodpfxohx Elfj Afdon Control Voltage [V]: 230 Temperature Control: Electric mica resistance heating bands Max. Processing Temperature [°C]: 300 Control Cabinet and Control Panel The electrical installation of the extruder is located in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; the water connection must be provided by the customer. A chiller unit for cooling the water is not included in the offer. Extruder tooling is not included in the scope of supply.

Būklė: naujas, Gamybos metai: 2025, Šlifavimo terpės paruošimas 1x Šlavimo duobė 1x Kaušinė grandinė 1x Oro separatorius 1x Elektrinis vibruojantis sietas Gbsdpew Ivvcefx Afden 1x Šlifavimo terpės bunkeris 1x 200 l slėginis šlifavimo įrenginys 1x Šlifavimo žarna, antgalis, avarinis jungiklis, valdymo kabelis 1x Valdymo spinta Pasirenkama įranga: - Skersinė sraigtinė transportavimo sistema per visą smėliavimo kameros plotį (taip pat gali būti naudojama kaip papildoma talpa ilgesniam šlifavimui) - Galimybė plėsti iki 2 šlifavimo terpių: feritinės ir mineralinės - Būgninis magnetinis separatorių - Galutinė demagnetizacijos pakopa - Magnetinė stalčių sistema

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, slėgis: 6 juosta, garantijos trukmė: 60 mėnesiai, vidinis plotis: 5 000 mm, vidinis ilgis: 15 000 mm, vidinis aukštis: 5 000 mm, filtravimo plotas: 352 m², tūrio srautas: 22 m³/val, Įranga: apšvietimas, dokumentacija / vadovas, Blast room *up to 5 years warranty* for all abrasives, constructed from steel frame/isopanels with filtration system, recirculation system, abrasive preparation, 200l pressure blasting pot with automatic refilling, blast hose with dead man control, breathing air system, LED lighting, wall lining made of 70shore 4mm fabric-reinforced rubber, sweep pit with bucket elevator. Abrasive return via sweep pit with bucket elevator, upgradeable to crosswise screw conveyor with dosing hood across full width as sweep pit or complete flat belt floor. Workpiece transport can be retrofitted: blast trolley with track bed, crane system, crane roof opening, etc. For glass bead blasting of stainless steel, upgradeable with proper magnetic drawer or electrically driven magnetic drum separator. For blasting with two different abrasives (ferritic and mineral), upgradeable with magnetic drum separator, final demagnetizing stage and a second air separator for abrasive separation and cleaning. Safety features: battery emergency lighting, emergency stop buttons inside and outside the cabin, viewing window to the blast chamber, door/gate limit switches, dead man control, rapid vent pressure vessel. Up to 5 years warranty on various components. Gbsdpfxou Hy Tpj Afdon 50 years of experience and more than 3,000 systems in blast equipment engineering.

Būklė: naujas, Gamybos metai: 2026, 5 t akumuliatorinis smėliavimo vagonas smėliavimo įrenginiui - 5 t apkrova - Skirtas bėgių sistemai - Varomas akumuliatoriumi - Nuotolinis valdymas - Matmenys: Ilgis = 3000 mm, Plotis = 1000 mm Gbodpjyyxidsfx Afdsn - Paviršiai ruošinių laikiklių tvirtinimui

Būklė: naujas, Gamybos metai: 2026, 10 t smėliavimo vežimėlis smėliavimo įrenginiui su pneumatiniu pavara. - Pneumatinė pavara 10 t apkrovai - Apkrova 10 t - Matmenys: Ilgis=2000mm Plotis=2000mm Aukštis=500mm - Skirta bėgių sistemai - Su paviršiais ruošinių laikikliams - Pasukamas stalas kaip parinktis Gbsdpfxjyyxfrj Afdsn

Gamybos metai: 2015, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED INSERT UNIT FOR METAL SHEET INLAYS This system is part of a larger production line; please refer to our other listings for additional equipment. The offered system includes 3 loading stations for surface layers, an automated adhesive application machine for sandwich bonding, a layup conveyor for manual assembly of inlays/cores, gantry systems for handling the surface layers, and an automated insert unit for metal sheet inlays/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, styrofoam ADHESIVE APPLICATION GANTRY FOR AREA & CONTOUR BONDING (of surface layers & inlays): Number of needle valves for area: 104 Number of needle valves for contour: 1 Adhesive system: 1K-PUR Gedpfx Afoyt Nm Ssdjbn Number of nozzles (water spray unit): 8 ANCILLARY EQUIPMENT: Climate control cabin (storage for 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit