Pramac Gbw 22 Y P pirkti naudotą (60 252)

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, įėjimo dažnis: 50 Hz, Brand: Pramac GBW 22 P DDS Soundproof Canopy: 66 dB(A) @ 7m Continuous Output 3-phase: 20.12 kVA / 16.10 kW Max. Output 3-phase: 22 kVA / 17.6 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel Engine: Perkins 404J-22G Emission Stage: STAGE V Cooling System: Water-cooled Cylinders: 4 in line Displacement: 2220 cm³ Aspiration: Naturally aspirated Speed: 1500 rpm Engine Control: Mechanical Fuel Consumption at 3/4 Load: 4.0 liters/h Fuel Consumption at Full Load: 5.74 liters/h Fuel Tank Capacity: 51 liters Generator: MeccAlte ECP28-M4 C Type: Brushless Number of Poles: 4 Regulation: Electronic (AVR control) Digital Control: ACP Sockets with RCD (Residual Current Device): 1x 32A - 400V / 5-pin Dimensions and Weight: Length: 1,645 mm Width: 870 mm Height: 1,060 mm Tank Volume: 51 liters Weight, dry: approx. 546 kg Central lifting eye for crane Forklift pockets Glow plugs Itodpjq A T Dwjfx Aauof Engine pre-heating (PHS) Battery trickle charger

Būklė: naujas, Continuous output: 20.12 kVA / 16.10 kW Isdpfx Aajq A T Eueuetf Voltage: 230 V / 400 V Frequency: 50 Hz Engine: Perkins 404J-22G Fuel: Diesel Tank capacity: 51 litres Generator type: Protection class IP21, MeccALte Starting system: electric Generator with AVR regulation Dimensions and weight: Length (mm): 1645 Width (mm): 870 Height (mm): 1072 Weight, dry: 640 kg Key start Sockets: 1 x 32 A - 400 V 1 x 16 A - 400 V 1 x 230 V Schuko 2 x 16 A - 230 V CEE

Gamybos metai: 2023, būklė: naujas,

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, įėjimo dažnis: 50 Hz, Make: Pramac GWB 22 Y CDS Itjdoq A U Axjpfx Aauof Soundproof enclosure: 64 dB(A) at 7m Continuous output: 18.4 kVA / 14.45 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel engine: Yanmar 4TNV88 BIPGE Emission standard: STAGE V Cooling system: Water-cooled Cylinders: 4 in-line Displacement: 2,190 cm³ Aspiration: Naturally aspirated Rated speed: 1,500 rpm Engine control: Mechanical Electric start Fuel consumption at 3/4 load: 3.87 litres/h Fuel consumption at full load: 5.17 litres/h Generator: MeccAlte ECP28-M/4 or equivalent Type: Brushless Number of poles: 4 Regulation: Electronic (AVR regulation) Manual control panel: Key start Voltmeter, ammeter, hour meter, Engine fault indicator Sockets: 1 x Schuko 220V 2 x CEE 16A - 230V 1 x CEE 16A - 400V 1 x CEE 32A - 400V Dimensions: Length: 1,645 mm Width: 870 mm Height: 1,072 mm Tank capacity: 51 litres Weight: approx. 560 kg Lifting eye Forklift pockets

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, For sale: Industrial chiller from renowned manufacturer HYFRA, designed for cooling water or process media in industrial installations. The unit is in very good visual condition and was manufactured in 2022. It has been professionally dismantled, is complete, and ready for recommissioning after connection. Technical specifications (from nameplate): • Model: SIGMA7-S-P • Cooling capacity: 6.9 kW (conditions: 32°C / 20°C) • Year of manufacture: 2022 • Refrigerant: R410A (GWP 2088) • Refrigerant quantity: 1.0 kg (CO₂ eq. 2.1 t) • Power supply: 3 / PE, 380–415 V ±10%, 50 Hz • Rated current: 8.20 A • Rated power: 4.70 kW • Max. ambient temperature: +42°C • Max. pressure (HP): 42 bar • Protection: 16 A • Weight: - dry: approx. 180 kg - filled with water: approx. 300 kg Equipment / features: • Integrated air-cooled condenser • Comprehensive safety systems (pressure, flow, temperature, anti-freeze) • Clear error code list on the housing Itjdpjyc H Irsfx Aaujf • Robust, industrial-grade construction • Connection fittings – visible in the photos • European manufacture, CE certified Applications: • CNC machines • Injection moulding machines, extruders • Production lines • Process cooling • Plastics, metal, and chemical industries

Būklė: labai geros būklės (naudotas), Four-side planer WEINIG HYDROMAT 22 AL - Max. working width: 220 mm - Max. working height: 130 mm - 8 spindles: 1) Bottom horizontal, 220 mm, 5.5 kW 2) Right vertical, 130 mm, 7.5 kW 3) Left vertical, 130 mm, 7.5 kW 4) Right vertical, 130 mm, 5.5 kW 5) Top horizontal, 220 mm, 11 kW – 5th spindle with electric height adjustment (up/down) 6) Bottom horizontal, 220 mm, 5.5 kW 7) Bottom horizontal, 220 mm, 5.5 kW – 7th spindle with support and Jointer system (cutterhead sharpening) 8) Universal, 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top feed system: Ijdpfeyyzcmjx Aauetf – 6 double-toothed infeed rollers + 1 single roller – 3 double smooth rubber outfeed rollers + 3 single rollers – Meter counter - Bottom feed system: – Toothed, driven, swiveling infeed roller in lower table – 3 smooth metal feed rollers - Feed via Cardan shafts - Pneumatic pressure rollers - Stepless feed speed adjustment + 2 speeds: 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Table lift motor: 0.75 kW - Central table lubrication - Extraction port diameters: 5 x 140 mm, 3 x 120 mm - Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm - Electrical cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Weight: approx. 5000 kg Feeder with centering device: - Roller width: 450 mm - 1 toothed infeed roller - 22 smooth feed rollers - Adjustable top pressure - Feeder length: 9020 mm - Stepless speed adjustment: 10–60 m/min - Motor: 0.75 kW - Dimensions (LxWxH): 9020 x 790 x 1150 mm Net price: PLN 180,000 Net price: EUR 42,860 (as per exchange rate 4.2 EUR; prices may vary depending on currency fluctuations)

Būklė: naudotas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Pramac P 5000 elektros generatorius — pagaminimo metai 2024 Naudotas, iš profesionalios nuomos parko Kurt König Baumaschinen GmbH, Einbeck. Būklė ir pastabos: - Būklė: Naudotas iš nuomos, reguliariai prižiūrėtas - Funkcionalumas: Visiškai veikiantis Iedpey A Hdbofx Aauotf - Produkto nuotraukos bus pateiktos vėliau — esant susidomėjimui, kreipkitės dėl naujausių nuotraukų - Apžiūrėti galima susitarus, adresu 37574 Einbeck Kaina 800 EUR + PVM | EXW Einbeck | Pristatymas pagal užklausą

Būklė: naudotas, Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, Pramac GRW 67 P elektros generatorius su važiuokle — pagaminimo metai 2019 Naudotas iš profesionalaus nuomos parko, priklausančio Kurt König Baumaschinen GmbH, Einbeck. Būklė ir pastabos: - Būklė: Naudotas iš nuomos, reguliariai prižiūrėtas - Funkcija: Visiškai veikiantis - Prekės nuotraukos netrukus — esant susidomėjimui atsiųsime naujausias nuotraukas - Apžiūra galima susitarus 37574 Einbeck Kaina 19.300 EUR be PVM | EXW Einbeck | Pristatymas pagal užklausimą Itjdpfx Aaoy A E Dyeusf

Būklė: naudotas, Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, Pramac GRW 67 P elektros generatorius su važiuokle — pagaminimo metai: 2019 Naudotas, iš Kurt König Baumaschinen GmbH (Einbeck) profesionalaus nuomos parko. Iedpoy A E Dtofx Aauetf Mobilus benzininis elektros generatorius profesionaliam naudojimui. Ypač tinka jautriems vartotojams ir dažnio keitikliams. Techniniai duomenys: Svoris: 165 kg | Variklis: Honda GX 630 Būklė ir pastabos: - Būklė: Naudotas iš nuomos, reguliariai prižiūrėtas - Funkcionalumas: Pilnai veikiantis - Produkto nuotraukos yra pavyzdinės ir vaizduoja naują prietaisą — faktinė būklė priklauso nuo eksploatacijos laiko - Apžiūrėti galima pagal susitarimą 37574 Einbeck vietoje Kaina: 19 300 EUR be PVM | EXW Einbeck | Pristatymas pagal susitarimą

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, veikimo valandos: 214 h, keliamoji galia: 2 000 kg, kėlimo aukštis: 4 000 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 1 920 mm, Gamintojas + modelis: LINDE L 20 as (1173) * EX * Proplan 2GD / Zona 1-21-22 * Stiebas: 3F4000 ID: 26065.0442 Kategorija: Demo Stiebas: 3F4000 Nuleidimo aukštis: 1920 mm Kėlimo aukštis: 4000 mm Keliamoji galia: 2000 kg Metai: 2018 Valandos: 214 val. Iodpfxey Dh N Uo Aaujtf Pilnai NAUJA baterija * 24v / 315ah * Metai 2025 Opcijos: * EX * Proplan !!!!! Sistema / Sertifikatas = EPS 16 ATEX 1137 X Dujų grupė = IIB Tipas = Cat 2G (leidžiama ZONOJE 1 ir 2) Temperatūros klasė = T4 ===== Dulkių grupė = IIIC Tipas = Cat 2D (leidžiama ZONOJE 21 ir 22) Temperatūros klasė = T 120°C ===== Labai UNIKALUS sprogimui atsparus ATEX „DEMO“ plataus vėžo vežimėlis su laisvai kabinamomis reguliuojamomis šakinio krautuvo šakėmis ir reguliuojamomis atraminėmis kojomis. Pilnai hidraulinis vairavimas, beveik NAUJAS!!

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 6 472 h, keliamoji galia: 2 000 kg, kėlimo aukštis: 4 650 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 130 mm, Gamintojas + modelis: LINDE E 20 L - 386 / 02 evo * EX * Proplan 2GD / Zona 1-21-22 *Stiebas: 3F4650 ID: 26057.5931 Kategorija: Naudotas Stiebas: 3F4650 Isdey Dh H Tjpfx Aaustf Nuleista aukštis: 2130 mm Kėlimo aukštis: 4650 mm Keliamoji galia: 2000 kg Metai: 2018 Darbo valandos: 6472 val. Baterija: Visiškai NAUJA * 48v / 625ah * Pag. 02/2026 Parinktys: * EX * Proplan !!!!! Sistema / Sertifikatas = INERIS 08 ATEX 3022 X Tipas = Cat 2G (leidžiama ZONOJE 1) Dujų grupė = IIB Temperatūros klasė = T4 Tipas = Cat 2D (leidžiama ZONOJE 21 - Dulkės) Dujų grupė = IIIB Temperatūros klasė = T 135 °C - IP 6X Konfigūruota pagal KONTEINERIŲ specifikacijas!! - Valdymas joystick'u pirmyn / atgal - Triplex FFL stiebas - Papildomas prožektorius priekyje - Mirksintis švyturys - Mėlynas taškas

Būklė: naudotas, Gamybos metai: 1980, Funkcionalumas: visiškai funkcionalus, bendras svoris: 3 730 kg, įėjimo dažnis: 50 Hz, nominali (akivaizdi) galia: 1 000 kVA, Įranga: Tipinė plokštelė prieinama, Parduodamas transformatorius 1000kVA BEZ BRATISLAVA Čekoslovakija Tipas: a T0394/22 50Hz 15750±5 %; 400/231V; 36,66A; 1444A Alyva: 840kg Bendras svoris: 3730kg Ijdpfxjyt El Re Aaustf S1min Grynoji kaina: 12 000 Eur Kaina derinama

Gamybos metai: 2010, būklė: geras (naudotas),

Gamybos metai: 2000, būklė: geras (naudotas),

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 4 918 h, keliamoji galia: 2 000 kg, kuro tipas: elektrinis, Gamintojas + modelis: TOYOTA LPE 200 * EX * Pyroban 3D / 22 zona * ID: 24090.5905 Kategorija: Naudotas Šakės: 1150 x 570 mm Keliamoji galia: 2000 kg Metai: 2018 Darbo valandos: 4918 val. Akumuliatorius: VISIŠKAI NAUJAS * 24v / 344ah * 2025 m. gamybos Iodpfx Aasyy Ax Ajustf Parinktys: * EX * Atex - Pyroban !!! Dujų grupė = IIIB Tipas = 3D ( leidžiama 22 ZONOJE ) Temperatūros klasė = T4 (135°C)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2016, veikimo valandos: 930 h, keliamoji galia: 2 000 kg, kuro tipas: elektrinis, Gamintojas + modelis: LINDE T 20 * EX * Proplan 3GD / Zona 2 - 22 ID: 25050.8953 Kategorija: Demonstracinis Šakės: 1150 x 560 mm Keliamoji galia: 2000 kg Metai: 2016 Valandos: 930 val. Baterija: Visiškai NAUJA * 24v / 230ah * 2025 m. Itedpfxjyy Axvj Aausf Papildomos parinktys: Speciali konstrukcija!! Su hidrauliškai pakreipiamomis šakėmis!!! Puikiai tinka, pvz., IBC ištuštinimui* EX * Proplan!!!! Sistema = ATEX 14 Proplan 3002 X Tipas = Kat. 3G (leidžiama ZONOJE 2) Dujų grupė = IIB Temperatūros klasė = T4 Tipas = Kat. 3D (leidžiama ZONOJE 22 – dulkės) Dujų grupė = IIIB Temperatūros klasė = T 135°C

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2016, veikimo valandos: 708 h, keliamoji galia: 2 000 kg, kuro tipas: elektrinis, Gamintojas + modelis: LINDE T 20 * EX * Proplan 3GD / 2 ir 22 zona ID: 25070.8428 Kategorija: Demo Šakės: 1150 x 560 mm Keliamoji galia: 2000 kg Metai: 2016 Darbo valandos: 708 val. Baterija: Visiškai NAUJA * 24V / 230Ah * Gamybos metai: 2025 Pasirinktys: Specialus gaminys!! Su hidrauliškai pasvirusiomis šakėmis!!! Pavyzdžiui, IBC ištuštinimui * EX * Proplan!!!! Sistema = ATEX 14 Proplan 3002 X Tipas = Kat. 3G (leidžiama 2 zonoje) Dujų grupė = IIB Temperatūros klasė = T4 Tipas = Kat. 3D (leidžiama 22 zonoje – dulkės) Dujų grupė = IIIB Iodpfxsyy Avhj Aauetf Temperatūros klasė = T 135°C

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2016, veikimo valandos: 1 176 h, keliamoji galia: 2 000 kg, kuro tipas: elektrinis, Gamintojas + modelis: LINDE T 20 * EX * Proplan 3GD / 2 ir 22 zona ID: 25070.8807 Kategorija: Demonstracinis Šakės: 1150 x 560 mm Talpa: 2000 kg Metai: 2016 Valandos: 1176 val. Akumuliatorius: Visiškai NAUJAS * 24V / 230Ah * Pagaminta 2025 m. Pasirinkimai: Speciali konstrukcija!! Su hidrauliškai pakreipiamomis šakėmis!!! Tinka, pvz., IBC ištuštinimui * EX * Proplan !!!!! Sistema = ATEX 14 Proplan 3002 X Tipas = Kat. 3G (leidžiama 2 ZONOJE) Dujų grupė = IIB Temperatūros klasė = T4 Tipas = Kat. 3D (leidžiama 22 ZONOJE – dulkės) Iedpfsyy Avbsx Aauetf Dujų grupė = IIIB Temperatūros klasė = T 135°C

Būklė: naudotas, rida: 507 283 km, galia: 162 kW (220,26 AG), pirmoji registracija: 10/2016, kuro tipas: dyzelinas, tuščias svoris: 6 660 kg, didžiausias leistinas svoris: 5 330 kg, bendras svoris: 11 990 kg, padangos dydis: 265/70 R19,5, ašių konfigūracija: 4x2, ratų bazė: 4 815 mm, kita apžiūra (TÜV): 06/2026, spalva: balta, vairuotojo kabina: kitas, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: plienas-oras, sėdimų vietų skaičius: 3, krovinio erdvės tūris: 42 m³, krovimo vietos ilgis: 7 200 mm, krovinių skyriaus plotis: 2 490 mm, krovos erdvės aukštis: 2 360 mm, Įranga: ABS, galinis keltuvas, kruizo kontrolė, oro kondicionavimas, trauki kontrolė,

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2010, veikimo valandos: 29 000 h, valdiklių gamintojas: SIEMENS, valdiklio modelis: 840 D, veleno greitis (maks.): 12 000 aps./min, Tai sistema, kurią sudaro HELLER MCH 350 ir HELLER MCH 350, turinti 22 padėklų sistemą su 800x800 padėklų. Abiejuose modeliuose yra 70 barų slėgio sistema, MCH 350 pasiekia iki 12 000, o MCH 350 C - iki 8000 aps/min. Apsvarstykite galimybę įsigyti šią HELLER MCH 350 + MCH 350 C horizontaliojo apdirbimo centro sistemą. Susisiekite su mumis ir gaukite daugiau informacijos apie šią sistemą. Itedpox D Skmjfx Aauef Papildoma įranga • Padėklai: 22 800x800 dydžio Mašinos privalumai Techniniai mašinos privalumai • Slėgis: 70 bar abiejose mašinose • Įrankių sistemos: 2 x 234 hsc 100 • Mch 350 c = 8000 aps/min Papildoma informacija MCH 300 Naudojimas: MCH 350 C Naudojimas: 29000 val: 22105 hours

Gamybos metai: 1983, būklė: geras (naudotas), RÜCO Double Crosscut Saw Type 22 Itedpfx Ajin E Rqsauof Year of manufacture: 1983 S/N 10860 Working area: Cutting size: 2600 x 2200 mm Minimum cutting width: 210 mm Cutting height: 100 mm With saw blade Ø 450 = 125 mm Technical specifications: Saw blades individually tiltable 45° 2 x main motors, 4.0 kW each, saw blade Ø 400 mm 2 x scoring units, 0.56 kW each, saw blade Ø 140 mm Weight: 1400 kg Space requirement: approx. 4400 x 4000 x H 1000 mm Transport dimensions: approx. 4400 x 1300 x H 1300 mm Specifications subject to confirmation

Būklė: naujas, Pressure: 220Bending length: 6050Column width: 5100Installation height: 600Max stroke: 350Throat depth: 450Dimensions (LxWxH): 6775x2650x3250Weight approx.: 18,0004 axes (Y1, Y2, X, R): Yes, all axes via the Esa S630 control unit (2D graphic control)CNC crowning via control: Yes, via CNC crowning control Esa S630 (2D graphic control)Motor power: 22Technical SpecificationsXL 60220UnitBending length6050mmPress force220tLowering speed100mm/sBending speed10mm/sRetraction speed100mm/sStroke350mmInstallation height / open height (E)600mmThroat depth (D)450mmColumn clearance (B)5100mmMachine length (L)6825mmMachine width (W)2300mmWidth without front stop (Y)1760mmMaximum height3010mmMain motor22kWOil tank capacity300lMachine weight19000kg The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile range of applications. EUROPA XL offers an exceptionally large installation height, resulting in a long stroke (cylinder travel). The extra-large throat depth ensures minimal limitations during operation. We prioritize quality, which is also reflected in the control system. As standard, we equip the machine with the premium Esa S640 (2D graphic control). Additionally, the KKI EUROPA XL press brake is equipped with CNC axes Y1, Y2, X, and R, operated via the controller. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included as standard. There are no compromises on upper tooling and dies; the CNC press brake KKI EUROPA XL is equipped with quality tools from EUROSTAMP Italy. Naturally, every machine is only as good as its service, which is why we focus on highly qualified staff with extensive experience in the CNC sheet metal processing sector. Ijdpfx Aajd Ehh Uouetf CNC axes Y1, Y2, X, and R Esa S640 (2D graphic control) Backgauge with dual linear guideway and ball screw Motorized crowning system with CNC control Heavy-duty height adjustment with handwheel, from 175 to heavy-duty on linear guideway Laser safety system on upper beam CE safety equipment Various options available Additional control options: ESA 640 2D 15'' touchscreen control                                                 ¤ 4,520,-- included ESA 675 W 3D 21'' touchscreen control (Windows base)                    ¤ 6,485,-- DELEM 66 T 2D 17'' touchscreen control (Windows base)                     ¤ 10,165,-- DELEM 69 T 3D 17'' touchscreen control (Windows base)                     ¤ 16,350,-- KK-Industries GmbH There’s something here for everyone!

Būklė: naujas, Pressure: 220 Bending length: 3020 mm Frame width: 2550 mm Installation height: 600 mm Stroke length (max.): 350 mm Throat depth: 450 mm Dimensions (LxWxH): 3745x2290x3055 mm Approx. weight: 11,250 kg 4 Axes (Y1, Y2, X, R): Yes, all axes controlled by Delem DA 66 (2D graphical control) CNC crowning via controller: Yes, via Delem DA 66 CNC control (2D graphical control) Motor power: 22 kW Technical specifications XL 30220 Bending length: 3020 mm Bending force: 220 t Lowering speed: 140 mm/s Bending speed: 10 mm/s Return speed: 130 mm/s Stroke: 350 mm Installation height / daylight (E): 600 mm Throat depth (D): 450 mm Frame opening (B): 2555 mm Machine length (L): 3745 mm Machine width (W): 2290 mm Width without front gauge (Y): 1720 mm Maximum height: 3055 mm Main motor: 22 kW Oil tank capacity: 300 l Machine weight: 11,800 kg Iodpfx Aaod Edhleuotf Model KK Kletzer EUROPA XL The high-performance EUROPA XL press brake is distinguished by its exceptional precision, accuracy, and versatile range of applications. The Europa XL features a very large daylight, resulting in a long stroke (cylinder travel). The throat depth is also above average, minimizing workpiece restrictions. We are committed to quality, which is also reflected in the CNC control system. As standard, we equip the machine with the premium Esa S640 (2D graphical control). Additionally, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R, all managed by the controller. Of course, CNC crowning via the Esa S 640 (2D graphical control) is also included. We make no compromises when it comes to upper tools and dies, fitting the KKI EUROPA XL CNC press brake with high-quality tooling from EUROSTAMP Italy. Reliable service is crucial to maximizing the value of any machine. That is why we focus on highly qualified staff with extensive expertise in CNC sheet metal processing. CNC axes Y1, Y2, X, and R Esa S 640 (2D graphical control) Backgauge with double linear guide and ball screw Motorized CNC-controlled crowning device Heavy-duty height adjustment with handwheel; from 175 t, heavy-duty version on linear guide Laser safety device on upper beam CE-compliant safety equipment Various options available Additional controller options: ESA 640 2D 15'' touchscreen controller – ¤ 4,520,-- incl. ESA 675 W 3D 21'' touchscreen controller (Windows-based) – ¤ 6,485,-- DELEM 66 T 2D 17'' touchscreen controller (Windows-based) – ¤ 10,165,-- DELEM 69 T 3D 17'' touchscreen controller (Windows-based) – ¤ 16,350,-- KK-Industries GmbH There’s something for everyone here!

Būklė: naujas, Pressure: 220 Bending length: 4050 mm Distance between uprights: 3550 mm Installation height: 600 mm Stroke length (max): 350 mm Throat depth: 450 mm Dimensions (LxWxH): 4740 x 2290 x 3050 mm Weight approx.: 13,350 kg 4 axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphical control) CNC crowning via controller: Yes, via Esa S630 (2D graphical control) Motor power: 22 kW Ijdpod Ehicofx Aauetf Technical Specifications XL 40220 Unit Bending length: 4050 mm Bending force: 220 t Approach speed: 140 mm/s Bending speed: 10 mm/s Return speed: 130 mm/s Stroke: 350 mm Installation height / open height (E): 600 mm Throat depth (D): 450 mm Frame gap (B): 3550 mm Machine length (L): 4740 mm Machine width (W): 2290 mm Width without front gauge (Y): 1730 mm Maximum height: 3050 mm Main motor: 22 kW Oil tank capacity: 300 l Machine weight: 13,200 kg Model KKI EUROPA XL The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile range of applications. The EUROPA XL offers an exceptionally large installation height, resulting in a long stroke (cylinder travel). Additionally, the throat depth is above average, ensuring maximum flexibility. We focus on quality, as reflected in the controller. As standard, we equip the machine with the premium Esa S640 (2D graphical control). Furthermore, the KKI Europa XL press brake is fitted with CNC Y1, Y2, X, and R axes controlled via the Esa S640. Naturally, CNC crowning via Esa S640 (2D graphical control) is included as well. We also make no compromises on the upper tool and die – the KKI EUROPA XL CNC press brake comes standard with premium tools supplied by EUROSTAMP, Italy. Of course, a machine is only as good as its service. That’s why we place great emphasis on highly qualified staff with extensive experience in CNC sheet metal processing. CNC axes Y1, Y2, X, and R Esa S640 (2D graphical control) Backgauge with dual linear guide and ball screw spindle Motorized CNC crowning system Heavy-duty height adjustment with handwheel; from 175 tons upward, heavy-duty version with linear guidance Laser safety device on upper beam CE-compliant safety equipment Various options available Other controllers available: ESA 640 2D 15'' touchscreen control – €4,520 incl. ESA 675 W 3D 21'' touchscreen control (Windows-based) – €6,485 DELEM 66 T 2D 17'' touchscreen control (Windows-based) – €10,165 DELEM 69 T 3D 17'' touchscreen control (Windows-based) – €16,350 KK-Industries GmbH There is something for everyone!

Būklė: naujas, Gamybos metai: 2025, PFEIFER technology skyCUBE P class 1250 x 1250 mm – 200W CO2 Laser The Flatbed – Laser Center (*Price depending on specification, this is a brand new laser machine manufactured by us) The multifunctional flatbed laser center skyCUBE, produced by PFEIFER technology in Saxony/Germany, is designed for professional cutting tasks and classic laser engraving. It combines high productivity with efficiency and precision, ensuring your investment pays off in a short period. The machine frame, built with welded and bolted steel construction, is engineered for industrial and commercial use. The drive system developed by PFEIFER technology assures precision and high repeatability. skyCUBE laser units meet all Class 1 requirements according to DIN EN 60825-1, offering maximum safety. The ergonomic design, featuring a pull-out working table, makes loading the machine easy. A drawer at the lower part of the unit collects cut materials. Simple, user-friendly, and intuitive – the skyCUBE PC software makes planning, execution, and control of your production tasks effortless. Project data is processed via layers (colors), with the ability to individually set the order and type of processing per layer. Established parameters can be saved and retrieved from a material database. A computer connected via LAN/USB interface transmits laser programs to the machine controller. A modern touch control panel provides access to all system information and functions. Overview of the skyCUBE Laser Processing Center: • German industrial-standard steel construction for safe, vibration-free mounting of laser components and axis systems, fitted with rolling industrial leveling feet • 8'' touchscreen display: see more, control more, communicate more with the skyCUBE laser processing center • Redundant safety system – Class 1 laser • Safety: Shutter – active mechanical beam path lock • Pull-out working table drawer • Integrated access and observation panel • Pull-out scrap collection drawer Itodpfxecwpkps Aausf • Air-flushed optics – filtered air supply to all laser components to protect the optics • Program-controlled process gas management • Drive system developed by PFEIFER technology for precision and high repeatability • PFEIFER technology mirrors and optics for perfect results in laser cutting and engraving • CO2 laser sources IRADION®, SYNRAD® for optimal beam quality and stability over extended periods • Certified, stable brand power supplies adapted to the laser source • Illuminated machine interior • Easy to learn operation, even without advanced CAD knowledge • Safety: Accident insurance-certified emergency stop / door and safety monitoring • Safety: Key switch to prevent unauthorized use of the unit • Centralized vacuum engraving/cutting smoke extraction connection • Multifunctional cutting table with low-reflection, removable support elements for laser material processing Optional: • Laser source and optic system configured as per application requirements • PFEIFER technology linear motor for X/Y axis