Optimum L34 Hs Cnc pirkti naudotą (12 351)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The machine is on display. Optiturn L34 HS CNC lathe – direct from the manufacturer. L34 HS – The OPTIMUM CNC lathe with Siemens SINUMERIK 808D Advanced PPU 150 control system. - Reinforced machine bed made of cast iron - Sophisticated spindle bearing - Emergency stop impact switch Dusdpfx Aozi Evgehrsw - Centralized lubrication - Spindle and feed motors by Siemens - Maintenance-friendly safety enclosure - Rear access panel for service and maintenance - Safety switch on the front sliding door - Turret positioned behind the turning center (left-handed turning tools) - Linear guideways - Includes “SINUMERIK 808D on PC” software package (practical training software for offline programming and simulation of workpieces on PC; free to download) Technical specifications Electrical connection: 400 V / 3 ph ~ 50 Hz Total connected load: 6.5 kVA Spindle - Drive motor (S1 operation): 3.7 kW - Drive motor torque (S1 operation): 23.6 Nm - Torque at spindle: 40 Nm - Spindle nose: DIN 6350 A2-3 - Spindle bore diameter: Ø 46 mm Coolant system - Coolant pump power: 95 W - Tank capacity: 75 liters Machine data - Center height: 165 mm - Center width: 600 mm - Swing over cross slide: Ø 146 mm - Swing over bed: Ø 350 mm Speed range - Spindle speeds*: 30 – 3,500 rpm Tool turret - Type: Electric - Number of tool stations: 6 tools - Toolholder height/width (square max.): 16 mm - Maximum boring bar diameter: 16 mm Accuracy - Repeatability: ± 0.01 mm - Positioning accuracy: ± 0.01 mm Travel - X-axis: 145 mm - Z-axis: 465 mm Feed rate - X-axis: 6,000 mm/min - Z-axis: 8,000 mm/min Machine leasing available through Siemens Finance. Subject to credit approval.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Machine is on display. Optiturn L28 HS CNC lathe – direct from the manufacturer. L28 HS – The OPTIMUM CNC lathe featuring Siemens SINUMERIK 808D Advanced PPU 150 control. - Reinforced machine bed made of cast iron - High-performance spindle bearing assembly - Emergency stop impact switch - Central lubrication system - Reference switch Dusdpfxozi Er Ie Ahrew - Maintenance-friendly safety enclosure - Rear access panel for maintenance - Safety switch on the front sliding door - Turret mounted behind the turning centre (left-hand turning tools) - Linear guideways - Software package "SINUMERIK 808D on PC" included (practical training software for offline programming and simulation of workpieces at the PC, free to download) - Two years SIEMENS warranty included Technical Specifications Electrical Connection: 400 V / 3 Ph ~50 Hz Total Connected Load: 3.75 kVA Spindle Drive Motor (S1 Operation): 2.2 kW Drive Motor Torque (S1 Operation): 14 Nm Spindle Torque: 28 Nm Spindle Mount: DIN 6350 A2-3 Spindle Taper: 5C Spindle Bore: Ø 30 mm Coolant System Coolant Pump Power: 95 W Tank Capacity: 25 litres Machine Data Centre Height: 169 mm Centre Distance: 430 mm Swing Diameter over Cross Slide: Ø 200 mm Swing Diameter over Bed: Ø 300 mm Speed Range Spindle Speeds*: 40 – 4,000 rpm Tool Turret Type: Electric Number of Tool Stations: 6 tools Square Tool Shank Size (max.): 16 mm Boring Bar Diameter (max.): 16 mm Accuracy Repeatability: ± 0.01 mm Positioning Accuracy: ± 0.01 mm Travels X-Axis: 145 mm Z-Axis: 465 mm Feed Rate X-Axis: 10,000 mm/min Z-Axis: 12,000 mm/min Machine leasing available through Siemens Finance. Sufficient liquidity required.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, The machine is currently on display and has only been used for demonstration purposes. Optiturn S400 HSC CNC Premium CNC Lathe directly from the manufacturer. S400 HSC – The OPTIMUM Premium CNC milling machine equipped with Siemens SINUMERIK 828D control stands out due to its performance, speed, precision, and long service life. Heavy-duty design · Compact construction · SIEMENS servo motors on all axes · Renishaw measuring arm for tool measurement · All servo motors with integrated encoder for maximum accuracy · Main spindle designed as a motor spindle · 45° slant bed design allowing for especially large machining diameters and unobstructed chip removal to the chip tray · Hydraulic 3-jaw chuck Ø 170 mm with soft jaws · Servo tool changer VDI 30 with 12 tool stations · Hardened and precision-ground ball screws for rapid axis traverses · Faster tool change speed · High hydraulic clamping force Dusdoymlhrspfx Ahrjw · Heavy-duty machining without vibration, ideal for the implementation of automation and high efficiency even under extreme conditions · Dimensionally stable linear guides ensure long service life through maximum static and dynamic rigidity · Manual tool measuring device · Heat exchanger · Portable electronic handwheel with enabling button and emergency stop facilitating program set-up · Belt-type chip conveyor for efficient chip removal · Work lamp for complete illumination of the work area · Coolant unit with cleaning gun · RJ45 and power interface · EMC (electromagnetic compatibility) · SIEMENS additional package for material defect liability and free online/on-site service OSS Plus (see “SIEMENS OSS Plus Additional Package” on page 117) · 1 year Basic maintenance contract included Machine Data Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 25 kVA Spindle Drive motor S1 duty: 11.6 kW Torque, drive motor S1 duty: 65 Nm Drive motor S6-30% duty: 14.4 kW Torque, drive motor S6-30% duty: 81 Nm Spindle mount: A2-5 Spindle bore: Ø 56 mm Chuck pass-through: Ø 45 mm Hydraulic chuck: Ø 170 mm Coolant System Coolant pump power: 700 W Tank capacity: 160 liters Hydraulic System Hydraulic pump power: 1.5 kW Tank capacity: 36 liters Machining Data Max. turning diameter: 220 mm Turning length: 320 mm Swing diameter over cross slide: 300 mm Swing diameter over machine bed: 500 mm Slant bed: 45° Speed Range Spindle speeds: 30 – 6,000 rpm Tool Changer Type: Servo VDI 30 Number of tool stations: 12 Accuracy Repeatability: ± 0.004 mm Positioning accuracy: ± 0.004 mm Travel X-axis: 180 mm Z-axis: 350 mm Feed Force (Dynamic) X-axis: 3.6 kN Z-axis: 3.6 kN Feed Speed X-axis / Z-axis: 30 m/min Motor Torque X-axis / Z-axis: 6 Nm Dimensions Length x width x height: 2,000 x 2,250 x 1,550 mm Total weight: 2,600 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, Gamintojas: Optimum Maschinen Germany GmbH Modelis: L34HS Serijos numeris (SN): 11261804002 Staklių tipas: CNC plokščias tekinimo staklės Pagaminimo metai: 2018 Dusdpjy Ia Uqjfx Ahrsw Variklio galia: 3,7 kW Maitinimas: 400 V / 50 Hz Veleno apsukų intervalas: apie 30 – 3500 aps./min Maksimali veleno apsukų greitis: 3500 aps./min Maksimalus tekinimo skersmuo: apie 350 mm Tekinimo skersmuo virš suporto: apie 146 mm Atstumas tarp centrų: apie 600 mm X/Y/Z ašių eiga: apie 185 / 185 / 540 mm Kūgis / tvirtinimas: MK 3 Svoris: apie 1200 kg

Būklė: naudotas, Gamybos metai: 2019, X eiga 550 mm Y eiga 305 mm Z eiga 460 mm Valdiklis Sinumerik 808D adv. Siemens Pagrindinio veleno sūkių diapazonas 10 - 10 000 min⁻¹ Pagrindinio veleno pavaros galia 11 / 7,5 kW Maks. sukimo momentas 70 / 48 Nm Įrankio tvirtinimas BT 40 Stalo tvirtinimo paviršius 800 x 320 mm Maks. stalo apkrova 300 kg T grioveliai 3x 14 x 100 mm Atstumas tarp veleno ir stalo 100 - 600 mm Įrankių stotelių skaičius 12 poz. Įrankio tvirtinimas BT 40 Maks. įrankio skersmuo 70 mm Maks. įrankio svoris 6,0 kg Įrankio keitimo laikas 7,0 s Greita eiga (X / Y / Z) 10 m/min Duedpfx Aeww Nb Sjhrow Didžiausias pastūmos greitis 10 000 mm/min Kartojamumo tikslumas +/- 0,008 mm Padėties tikslumas +/- 0,01 mm Bendras energijos poreikis 15 kVA Staklių svoris apie 2,9 t Užimamas plotas apie 3,5 x 2,5 x 2,4 m Vertikalus CNC apdirbimo centras OPTIMUM - OPTImill F 105 CNC - PARODOMOJI MAŠINA

Būklė: naujas, Gamybos metai: 2021, Optimum CNC Milling Machine OPTImill F 105 CNC Sinumerik 808D ADVANCE with Accessories (New, Unused Condition): Including Accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Assortment, 58 pieces - Hydraulic Milling Vise HCV 105 - 20 liters Cutting & Drilling Emulsion AQUACUT C1 - Preparation for 4th Axis - Carousel Tool Changer with 12 Tool Positions - All Linear Guides with Stainless Steel Covers - Automatic Central Lubrication - Siemens Main Spindle Motor - Siemens Servo Drive on All Axes (Closed-Loop Control) - Max. Spindle Speed 10,000 rpm - Machine Light in the Work Area - Portable Electronic Handwheel with Approval Button and Emergency Stop Switch - Coolant System with 120-liter Coolant Tank - Tool Change Performed Automatically or via Button (Electropneumatic Tool Clamping System) Dimensions and Weights: Length approx. 2164 mm Width/Depth approx. 1860 mm Height approx. 2200 mm Weight approx. 2800 kg Drilling/Milling Capacity: Max. Face Milling Cutter Diameter 70 mm Max. End Mill Diameter 35 mm Rapid Traverse Speed: X-Axis 15,000 mm/min Y-Axis 15,000 mm/min Z-Axis 15,000 mm/min Electrical Data: Connection Voltage 400 V Network Frequency 50 Hz Electrical Connection: Total Connected Load 15 kVA Horizontal Milling Table: Length 800 mm Width 320 mm Vertical Spindle-to-Table Distance Min. 100 mm Vertical Spindle-to-Table Distance Max. 600 mm T-Slot Size 14 mm T-Slot Number 3 T-Slot Spacing 100 mm Max. Load Capacity 300 kg Accuracy: Repeatability ± 0.008 mm Positioning Accuracy ± 0.008 mm Coolant System: Coolant Pump Motor Power 650 W Tank Capacity 120 l Pneumatic Connection: Operating Pressure 7 bar Travel Range: X-Axis Automatic 550 mm Y-Axis Automatic 305 mm Z-Axis Automatic 460 mm Vertical Spindle: Spindle Taper BT 40 Speed Range 10 – 10,000 rpm Drive Motor Power S1 Continuous Duty 7.5 kW Drive Motor Power S6-30% Duty Cycle 11 kW Drive Motor Torque S1 Continuous Duty 48 Nm Drive Motor Torque S6 30% Duty Cycle 70 Nm Feed Motor Torque: X-Axis S1 Continuous Duty 8 Nm Y-Axis S1 Continuous Duty 8 Nm Z-Axis S1 Continuous Duty 11 Nm Tool Changer: Type Carousel Number of Tool Positions 12 tools Max. Tool Diameter 70 mm Max. Tool Length 300 mm Max. Tool Weight 6 kg Tool Change Time Tool-to-Tool (T to T) 7 s CNC Tool Starter Set BT 40: - 1x Face Mill Holder 27 mm Mount - 1x Keyless Drill Chuck 1.5 - 16 mm - 2x Weldon 6 mm / 20 mm - 1x each Weldon 8 mm / 10 mm / 12 mm / 16 mm - 1x Adapter BT 40 to MK 3 - 4x Collet Chuck Holders ER 32 - 1x Collet Wrench ER 32 - 18-Piece Collet Set ER 32 - 1x Height Setting Device - 1x Assembly and Tool Setting Aid - 15x Pull Studs Hydraulic Milling Vise HCV 105: - Robust Design for Milling - Guide Ways Hardened and Ground - Booster System: Low Effort, High Clamping Force when Clamping - Wide Clamping Range via Locking Pin with Various Hole Spacings - Manufactured from High-Quality Stainless Steel - Long Service Life due to High Quality - High Clamping Force Jaw Height 42 mm Jaw Width 107 mm Clamping Width 170 mm Length without Handle 442 mm Overall Height 107 mm T-Slots 16 mm Clamping Pressure 24.5 kN Clamping Force 2500 kg Dimensions and Weights: Dusdpfxeyxyhfo Ahrjw Weight approx. 22 kg

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine is on display. Optiturn Premium CNC Lathe direct from the manufacturer. S600M – The OPTIMUM Premium CNC Lathe equipped with Siemens SINUMERIK 828D control system. • Heavy-duty construction • Renishaw probe arm for manual tool measurement • Ball screw with improved accuracy, rigidity, and heat resistance • Siemens servo motors on all axes • All servo motors with integrated encoders for maximum accuracy • 45° slant bed design for exceptional rigidity • Hydraulic three-jaw chuck, Ø 200 mm • Sauter tool turret VDI 40 with 8 tool stations and driven tooling • Hardened and precision-ground ball screws for high rapid traverse speeds in all axes • Manual tool measurement setup • Tailstock with hydraulic quill • Heat exchanger • Portable electronic handwheel with enabling switch and emergency-stop button greatly simplifies program setup • Chip conveyor in belt design • Work light for complete illumination of the workspace • Coolant system with cleaning gun Linear Guideways • Maximum static and dynamic rigidity • High positioning accuracy • Smooth, backlash-free movement • Hydraulic VDI 40 turret head • All 12 stations powered by an integrated motor, designed for speeds up to 4,000 rpm Machine Bed • Heavily ribbed • 45-degree incline • High rigidity and durability • Facilitates chip removal SAFETY Integrated – Setup with open door • Functional safety also protects against high costs! Complete Package • Safety Integrated • Remnant material detection and processing • ShopMill step programming • Manage network drives • 3-D simulation • Trace recording Additional Package SIEMENS OSS Plus • 12 months; Article no. 3589020 • 24 months; Article no. 3589021 • 36 months; Article no. 3589022 Dimensions and Weights Length approx. 4570 mm Width/Depth approx. 1845 mm Height approx. 1955 mm Weight approx. 4200 kg Work Areas Chuck diameter: 320 mm Turning length: 475 mm Swing over bed: 570 mm Swing over cross slide: 400 mm C-Axis (Factory Option) Angular accuracy: 51” Repeat accuracy: 20” Motor Torque X-axis: 11 Nm Z-axis: 11 Nm Speed Range Spindle speed range: 30 – 4000 rpm Rapid Traverse Speed X-axis: 24 m/min Z-axis: 30 m/min Electrical Data Supply voltage: 400 V Network frequency: 50 Hz Total connected load: 40 kVA Accuracy Repeatability: ±0.002 mm Positioning accuracy: ±0.004 mm Chuck passage diameter: 51 mm Slant bed: 45° Tailstock Taper: MK 5 Quill stroke: 100 mm Quill diameter: 100 mm Quill feed: hydraulic Spindle Spindle mount: DIN ISO 702-1 No. 6 Hydraulic chuck diameter: 200 mm Spindle nose: A2-6 Main spindle bore: 65 mm Travel X-axis: 235 mm Z-axis: 530 mm Vertical spindle Dodsymk Ukjpfx Ahrsuw Continuous duty (S1) drive power: 11 kW S6-30% duty cycle drive power: 22 kW Drive motor torque: 70 Nm Drive motor S6-30% torque: 140 Nm Feed Force Feed force X-axis: 8.4 kN Feed force Z-axis: 5.6 kN Tool Turret Type: Servo VDI 40 - DIN5480 Number of tool stations: 12 Drive motor power: 4.82 kW Maximum admissible speed at tool coupling: 6000 rpm Maximum tool torque: 20 Nm

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The machine is on display and has only been used for demonstration purposes. Optiturn L44 CNC Premium CNC lathe, direct from the manufacturer. L44 CNC – The OPTIMUM Premium CNC turning machine with Siemens SINUMERIK 828D control is characterized by its power, speed, precision, and long service life. Dimensions and Weights Maximum width/depth: 2300 mm Approx. length: 2530 mm Approx. width/depth: 1595 mm Approx. height: 1795 mm Approx. weight: 2600 kg Working Areas Chuck diameter: 150 mm Chuck actuation: hydraulic Centre height: 223 mm Centre distance: 850 mm Swing diameter over bed: 446 mm Swing diameter in bed gap: 520 mm Swing diameter over cross slide: 240 mm Bed width: 300 mm Motor Torque Duodpfx Ahoymkwrsrew X-axis: 6 Nm Z-axis: 8.5 Nm Speed Range Number of speed ranges: 1 Speed range: 10 – 3000 rpm Electrical Data Drive motor power: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz Electrical Connection Total connected load: 23 kVA Accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Hydraulic System Motor power: 0.75 kW Tank capacity: 50 l Ball Screw X-axis diameter: 25 mm X-axis pitch P: 5 mm X-axis accuracy class: C3 Z-axis diameter: 40 mm Z-axis pitch P: 5 mm Z-axis accuracy class: C3 Coolant System Coolant pump power: 270 W Tank capacity: 90 l Machine Data Spindle bore diameter: 40 mm Motor(s) Drive motor torque: 33 Nm Tailstock Taper: MK 4 Quill stroke: 165 mm Quill diameter: 52 mm Spindle Spindle nose: DIN ISO 702-1 No. 5 Spindle bore/bar capacity diameter: 52 mm Control Type: Sinumerik 828D PPU 240 System software: SW 24 CNC memory: 3 MB Look Ahead: 50 Block change time: 3 ms Number of tools: 128 Travel X-axis: 250 mm Z-axis: 760 mm Vertical Spindle Continuous drive motor power S1: 7 kW Drive motor power S6-30% duty: 16 kW Drive motor torque: 33 Nm Drive motor torque S6-30% duty: 80 Nm Feed Speed X-axis: 15,000 mm/min Z-axis: 15,000 mm/min Feed Force Feed force X-axis: 7.5 kN Feed force Z-axis: 5.3 kN Tool Changer Type: hydraulic; VDI 30 Number of tool stations: 8 Max. tool square shank height/width: 20 x 20 mm Max. boring bar diameter: 25 mm • SIEMENS spindle and servo motors • Fully enclosed cabinet with safety interlock • Standard maximum spindle speed up to 3000 rpm • Automatic central lubrication • Swivelling control panel • Tailstock cover • Electronic handwheels for X- and Z-axes • Coolant system with 90-litre coolant tank • RJ45 connector, USB port, and 230 V power outlet • EMI (Electromagnetic compatibility) • Six leveling feet • Operator tools SINUMERIK 828D Basic COMPLETE PACKAGE • Safety Integrated • Remnant material detection and processing • ShopTurn step programming • Network drive management • 3D simulation • Path tracing Control • 10.4" colour display • 4:3 format • User-friendly SINUMERIK Operate software • Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) card Guides • Rigid flat-bed guideways Ball Screws • For high rapid traverse speeds in all axes • Low wear • For high positioning and repeat accuracy

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, The machine is currently on display and has been used exclusively for demonstration purposes. Optimill F50 E CNC milling machine, available directly from the manufacturer. F50 E – The OPTIMUM CNC milling machine equipped with the Siemens SINUMERIK 808D Advanced control system stands out for its performance, speed, precision, and long service life. • Column-type cast-iron machine frame for high rigidity • Carousel-type tool changer with eight tool positions • All linear guides equipped with stainless steel covers • Automatic central lubrication system • Siemens main spindle motor • Siemens servo drives on all axes (closed-loop control) • Maximum spindle speed of 10,000 rpm • Portable electronic handwheel with enabling switch and emergency stop button greatly facilitates program setup Duedpoymkdxjfx Ahrow • Coolant system with 70-liter coolant tank • Tool change is performed automatically or at the push of a button (electropneumatic tool clamping system) • Heavy-duty, precision-machined milling table – generously dimensioned and finely surface-finished • Large access doors designed for minimal cleaning and maintenance time • LED machine lamp for full illumination of the working area • SIEMENS add-on package: Materials Defects Coverage and free on-site OSS service SINUMERIK 808D • Identical control software package ensures process reliability • LED tool number display • MCP with rotary controls for feed and spindle override • Absolute encoder – no reference run required • Higher accuracy Control system • 8.4" LCD color display with 800 x 600 resolution SIEMENS OSS add-on package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 Dimensions and Weights Length approx. 2030 mm Width/Depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical Data Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 10 kVA Milling Table (horizontal) Length 690 mm Width 225 mm Distance spindle (vertical) – table min. 90 mm Distance spindle (vertical) – table max. 410 mm T-slot size 14 mm T-slot number 3 T-slot spacing 63 mm Max. table load 150 kg Accuracy Repeatability ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic Connection Operating pressure 6 bar Travel Paths X-axis automatic 330 mm Y-axis automatic 220 mm Z-axis automatic 320 mm Distance spindle – column min. 280 mm Distance spindle – column max. 280 mm Vertical spindle Spindle taper BT 30 Speed range 10,000 rpm Drive motor continuous duty S1 3.7 kW Drive motor S6-30% duty cycle 5.5 kW Drive motor torque continuous duty S1 24 Nm Drive motor torque 30% duty cycle S6 36 Nm Feed Rate X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Feed Motor Torque X-axis continuous duty S1 3.5 Nm Y-axis continuous duty S1 6 Nm Z-axis continuous duty S1 6 Nm Tool Changer Design: carousel Number of tool positions: 8 Max. tool diameter: 100 mm Max. tool length: 200 mm Max. tool weight: 6 kg Tool-to-tool change time: 7 s

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine is on display. Optimill F 80 CNC milling machine direct from the manufacturer. F 80 CNC – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control, featuring power, speed, precision, and long service life. • Column-type cast iron construction for high rigidity • Carousel-type tool changer with 12 tool positions • All linear guides fitted with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed-loop control) • Maximum spindle speed: 10,000 rpm • Portable electronic handwheel with enabling switch and emergency stop facilitates program setup considerably • Coolant system with 70-liter coolant tank • Tool change is automatic or by push-button (electropneumatic tool clamping system) • Heavy-duty, precision-milled table—large dimensions and finely ground surface • Extra-large access doors minimize cleaning and maintenance time • LED machine lighting provides full illumination of the work area SINUMERIK 808 ADVANCED Compact and robust Communication • USB front panel (IP65) • Serial interface RS232C • RJ45 Ethernet at the rear User-friendly • Technology-specific keyboard layout • Hard keys with protective membrane Process reliability • LED tool number display • MCP with rotary switches for feed and spindle override Complete package • RJ45 Ethernet port • Prepared for remote maintenance • AST function: enables easy optimization for demanding dynamics and accuracy • Absolute encoder—no reference run needed Dusdpfxoymkcus Ahrjw • Increased accuracy Dimensions and Weights Length approx. 1995 mm Width/Depth approx. 1930 mm Height approx. 1640 mm Weight approx. 2300 kg Rapid traverse speeds X-axis: 20 m/min Y-axis: 20 m/min Z-axis: 20 m/min Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 12 kVA Horizontal table Length: 800 mm Width: 260 mm Spindle to table min.: 100 mm Spindle to table max.: 550 mm T-slot size: 16 mm Number of T-slots: 5 Distance between T-slots: 50 mm Max. table load: 200 kg Accuracy Repeatability: ± 0.01 mm Positioning accuracy: ± 0.01 mm Coolant system Coolant pump power: 450 W Tank capacity: 80 l Pneumatic connection Operating pressure: 7 bar Travel Automatic X-axis: 450 mm Automatic Y-axis: 260 mm Automatic Z-axis: 450 mm Spindle-column distance max.: 370 mm Vertical spindle Spindle taper: BT 40 Speed range: 50 – 10,000 rpm Speed range note: Maximum spindle speed must be reduced by approx. 20% during continuous operation. Continuous-duty motor power S1: 3.7 kW Motor power S6-30% duty: 5.5 kW Continuous-duty torque S1: 24 Nm 30% duty torque S6: 36 Nm Feed motor torque X-axis S1: 6 Nm Y-axis S1: 6 Nm Z-axis S1: 11 Nm Tool changer Type: Carousel Number of tool positions: 12 tools Maximum tool diameter: 95 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Tool change time (chip to chip): 7 s

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Naudota automatinė juostinė pjovimo staklės MEP SHARK 310 CNC HS Pjūklo matmenys: 4640x34x1,1 mm Kintamas pjovimo greitis: 15-115 m/min Dsdpfsyyuxnex Ahrjuw Pjovimo galia: apvalus 310 mm, kvadratinis 310x310 mm Automatinis juostos įtempiklis Automatinis drožlių šalintuvas Papildoma įranga: vertikalus spaustuvas Staklių svoris: 2200 kg Staklės puikios būklės, bus visiškai patikrintos ir aptarnautos.

Būklė: naujas, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical band saw in dual-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Standard equipment includes: Djdpsfm T Hbefx Ahrouw - Powered chip conveyor, mountable on either the right or left side of the machine. - Clamping pressure regulation of the machine vices. - Feeder with vertical rollers for lateral material support. - Sensors for material start detection. - Clamping pressure regulation. - Storage for up to 300 programs. - The machine is available with either a 34 mm or 41 mm blade at no extra cost. Price on request.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2005, bendras ilgis: 10 000 mm, CNC 5000 control with 17-inch color TFT touch screen. - Automatic cutting by rotary shear - Double set of hydraulic clamps for sheet holding (short and long) Upper beam with water-folding groove, oil filling, fastening and leveling material, emergency stop rail along the entire length of the machine, integrated emergency stop drive in the foot pedal for the upper beam and folding beam, 2nd pedal for two-person operation, upper beam safety device, 2 short part holding fingers The machine is repaired, serviced, and cleaned by a specialist and is fully operational. A functional test will be performed. Sheet width: 10,000 mm Steel sheet thickness: 1.5 mm Aluminum sheet thickness: 2.5 mm Dusdpfx Aownyu Dehrew Stainless steel (VA) sheet thickness: 1.5 mm Back gauge width: 150 - 1150 mm Color: light blue/light grey Total power required: 400 V Required space: 12,500 x (2,367 x 700) + fencing 2,070 mm Insertion depth: 1,150 mm Machine weight: 18,500 kg Positioning speed: 250 mm/sec Number of uprights: 8 pieces Number of clamping claws: 8 Folding angle: 145 degrees

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Staklė yra eksponuojama. „Optimill F 200 HSC Premium“ CNC frezavimo staklė – tiesiai iš gamintojo. „F 200 HSC“ – aukščiausios klasės „OPTIMUM“ CNC frezavimo staklė su „Siemens SINUMERIK 828D“ valdikliu, pasižyminti našumu, greičiu, tikslumu ir ilgaamžiškumu. Sunkios konstrukcijos · Didelis našumas · Didelis patikimumas · Tvirtas, su sustiprintomis briaunomis, sukantįs atsparus staklių pagrindas · Profilinis bėgelis su ritiniais, užtikrinantis didelį greitį visose ašyse · Galingi servo varikliai visose trijose ašyse · Teleskopinis apsauginis dangtelis ant bėgelių visose trijose ašyse · Automatinė tepimas · Tvirtas, tikslus frezavimo stalas su penkiomis T formos grioveliais, didelių matmenų ir tiksliai šlifuotas · Nešiojamas, elektroninis valdymo ratas su pradinio nustatymo mygtuku ir avariniu sustabdymo jungikliu palengvina programų paleidimą · Naujas · Aušinimo skysčio sistema su drožlių nuplovimo sistema ir valymo pistoletu · Verpstės vidinis aušinimas 20 bar slėgiu · Juostinis drožlių konvejeris užtikrina efektyvų drožlių pašalinimą · Drožlių vežimėlis · RJ45 jungtis ir 230 V maitinimo prijungimas · Uždaras valdymo spinta su integruotu šilumokaityčiu užtikrina optimalią temperatūrą ir neleidžia prasiskverbti nešvarumams · Staklių apšvietimas darbo zonoje · Papildomas „SIEMENS“ paketas – medžiagų defektų garantija ir nemokama internetinė / vietoje teikiama techninė pagalba „OSS Plus“ · 1 metų garantinis aptarnavimas (pagrindinis), įskaičiuotas D / A / CH šalyse Frezavimo verpstė – integruota verpstė Staklių duomenys Elektrinis prijungimas 400 V / ~50 Hz Bendroji prijungimo galia 20 kVA Frezavimo verpstė Variklio galia, veikiant S1 režimu 10,5 kW Sukimo momentas, variklis veikiant S1 režimu 50 Nm Variklio galia, veikiant S6-30 % režimu 26,4 kW Sukimo momentas, variklis veikiant S6-30 % režimu 125 Nm Verpstės laikiklis SK 40 / DIN 69871 Aušinimo ir tepimo sistema Aušinimo skysčio siurblių galia (3 vnt.) 1 kW Srautas 35 l/min. Bako talpa 200 litrų Valymo siurblys Valymo siurblio galia 530 W Frezavimo tikslumas Pasikartojančio judesio tikslumas ± 0,005 mm Padėties nustatymo tikslumas ± 0,005 mm Įrankių keitiklis Tipas – dvigubo rankos griebtuvas Įrankių laikiklių skaičius 24 Maksimalus įrankio skersmuo 78 mm Maksimalus įrankio skersmuo (papildomi laikikliai) 120 mm Įrankio ilgis 300 mm Maksimalus įrankio svoris 8 kg Įrankio keitimo laikas: nuo įrankio iki įrankio 2,5 sekundės Eismo sritis X ašis 850 mm Y ašis 500 mm Z ašis 550 mm Pašaravimo pavara Greitas judesys X, Y, Z ašyse 48 m/min. Sukimo momentas, variklis X / Y / Z ašys 16 Nm / 16 Nm / 20 Nm Pašaravimo jėgos X / Y / Z ašys 5,34 kN / 5,34 kN / 6,68 kN Sukimosi greičio diapazonas Sukimosi greičiai 12 000 aps./min. Pneumatika Oro slėgis 6–8 bar Dsdpfxjzi Ex Us Ahrsuw Oro sąnaudos per valandą 6–8 kg/m³ Frezavimo stalas Atstumas nuo verpstės iki stalo 100–650 mm Stalo ilgis x plotis 1 000 x 500 mm T formos griovelių dydis / skaičius / atstumas 18 mm / 5 / 100 mm Maksimali apkrova 500 kg Matmenys Ilgis x plotis x aukštis 2 400 x 2 355 x 2 860 mm Bendras svoris 5 500 kg

Būklė: naudotas, Technical Details: X-axis travel: 200 mm y-axis travel: 450 mm z-axis travel: 460 mm Control: Siemens 802S base line Spindle mount type ISO: ER 32 Swiveling spindle head left and right: No Speed range: 150 - 8600 rpm Feed rate X/Y/Z: 2000 - stepless mm/min Table clamping surface: 750 x 210 mm Duedeu Ndcajpfx Ahrew Interface: 232 Total power consumption: 3 kVA Weight approx.: 760 kg Machine dimensions approx. (LxWxH): 1.9 x 1.2 x 2.1 m Table movement: X-axis: 200 mm and Y-axis: 450 mm Spindle vertical Z-axis: 460 mm Max. tool holder for milling cutters: Ø 20 mm Drilling capacity (steel): Ø 13 mm Max. distance spindle to table: 470 mm Equipment: Electronic handwheel Coolant system Central lubrication Machine interior lighting Machine feet

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, veleno skylė: 30 mm, veleno greitis (min.): 40 aps./min, X ašies eiga: 145 mm, Z ašies eigos atstumas: 465 mm, sukimosi greitis (maks.): 4 000 aps./min, plotis centre: 650 mm, centro aukštis: 150 mm, keliamoji galia: 1 200 kg, gerklės gylis: 4 000 mm, For sale is an as-new CNC lathe from OPTIMUM, model OPTIturn L28HS. The machine is in excellent condition, originating from a vocational training institute (BFI) and has only been used for training purposes (setup and program transfer). Technical details: Control: Siemens Sinumerik 808D Advanced Year of manufacture: 2019 Commissioned: 2021 Centre height: 150 mm Centre distance: 650 mm Swing diameter over bed: 300 mm Swing diameter over cross slide: 200 mm Spindle speed range: 40–4,000 rpm Spindle mount: ISO 702-1 No.3, Form A2 Spindle bore: 32 mm Spindle motor power: 2.2 kW Spindle torque: 28 Nm Tool changer: 8 stations Tool holder: VDI 20 Dusdjy D Hkqepfx Ahrsw X-axis travel: 145 mm Z-axis travel: 465 mm Tailstock taper: MK2 Quill stroke: 80 mm Footprint: 1,655 x 1,485 x 1,955 mm Note: Machine hours can be read onsite, if you have the necessary knowledge. Since it was used solely for training purposes, very low operating hours are to be expected. Tools and tool holders are not included in the offer. Transport and loading can be organised Europe-wide for an additional charge, upon request. Prices are subject to VAT. Inspection possible by appointment. Contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase / sale BUYING AND SELLING OF PRODUCTION AND METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, The machine is currently on display. Optimill F 310 HSC Premium CNC milling machine, direct from the manufacturer. F 310 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is distinguished by power, speed, precision and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-free machine base • Profile rail with roller guides on all axes for high load capacity • High-torque servo drives, directly mounted to ball screw spindles on all three axes • Precision-ground, preloaded high-performance ball screw spindles for high rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40, spindle speed up to 12,000 rpm with inline spindle • Robust, precision-machined milling table with five large, precision-ground T-slots • Portable electronic handwheel with enabling button and emergency stop switch greatly facilitates program setup • Tool changer with arm gripper, 30 tool stations • Coolant system with chip flush and cleaning gun • Internal spindle coolant 20 bar • Belt-type chip conveyor for efficient chip removal • Chip trolley • Oil separator • Machine light in the work area • Additional SIEMENS package: material defect warranty and free online/on-site service OSS Plus • 1-year basic maintenance contract included in DE/AT/CH Control • 15.6" color display • 16:9 format Total package • Safety Integrated • Remnant material detection and processing • ShopMill work step programming • Network drive management • 3D simulation • Real-time drawing Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 12,000 rpm Dimensions and weights • Length approx. 4319 mm • Width/depth approx. 2300 mm • Height approx. 3000 mm • Weight approx. 7000 kg Rapid traverse speed • X-axis 30 m/min • Y-axis 30 m/min • Z-axis 30 m/min Electrical data • Mains voltage 400 V • Frequency 50 Hz • Electrical connection • Total connected load 56 kVA Horizontal milling table • Length 1200 mm • Width 600 mm • T-slot size 16 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm Travel • X-axis automatic 1050 mm • Y-axis automatic 600 mm Dodpjynf Unjfx Ahreuw • Z-axis automatic 600 mm Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 12,000 rpm • Drive motor power continuous S1 20 kW • Drive motor power S6-30% duty 50.3 kW • Drive motor torque continuous S1 96 Nm • Drive motor torque 30% duty S6 240 Nm Feed force • X-axis feed force 6.68 kN • Y-axis feed force 6.68 kN • Z-axis feed force 10 kN Feed motor torque • X-axis continuous S1 18 Nm • Y-axis continuous S1 18 Nm • Z-axis continuous S1 27 Nm Tool changer • Double arm gripper • Number of tool stations 30 • Max. tool length 300 mm • Max. tool weight 8 kg • Tool change time (tool to tool) 2.5 s

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, The machine is on display. Optimill F 110 HSC Premium CNC Milling Machine directly from the manufacturer. F 110 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its power, speed, precision, and high durability. · Heavy-duty construction · High productivity · High reliability · Strongly ribbed, torsion-resistant machine base · Linear guideway with ball screw drive for high rapid traverse speeds on all axes · High-torque servo drives on all three axes · Telescopic guideway covers on all three axes · Automatic lubrication · Massive, precision-ground milling table with three T-slots, large dimensions · Portable electronic handwheel with enabling switch and emergency-off impact switch greatly simplifies program setup · Coolant system with chip flushing and cleaning gun · Belt-type chip conveyor ensures efficient chip removal · Chip trolley · RJ45 connection and 230 V power supply · Enclosed control cabinet with integrated heat exchanger for optimal temperature and prevention of ingress of dirt particles · Machine light in working area · SIEMENS extended warranty for materials and free online/on-site service (OSS Plus) · 1 year of basic maintenance contract included in Germany/Austria/Switzerland Milling Spindle: Inline spindle Machine Data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 duty: 9 kW Torque drive motor S1 duty: 57 Nm Drive motor S6-30% duty: 21.2 kW Torque drive motor S6-30% duty: 135 Nm Spindle mount: SK 40 / DIN 69871 Option: Internal spindle cooling Drive motor S1 duty: 10.5 kW Torque drive motor S1 duty: 50 Nm Drive motor S6-30% duty: 26.4 kW Torque drive motor S6-30% duty: 125 Nm Coolant System Coolant pump power (2 units): 900 W Max. delivery rate: 35 l/min Tank capacity: 116 liters Cleaning Pump Djdpfx Ahoymka Hsrjuw Cleaning pump power: 530 W Milling Accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (with adjacent stations free): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time: tool to tool: 2.5 seconds Travel X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed Drive Rapid traverse X, Y, Z: 48 / 48 / 32 m/min Motor torque X, Y, Z: 11 Nm / 11 Nm / 20 Nm Feed Forces X, Y, Z: 3.67 kN / 3.67 kN / 6.68 kN Speed Range Speeds*: 12,000 rpm Pneumatics Air pressure: 6 bar Air consumption per hour: 6 – 8 kg/m³ Milling Table Spindle-to-table distance: 100 – 600 mm Table length x width: 850 x 400 mm T-slot size/number/spacing: 18 mm / 3 / 100 mm Max. load: 400 kg Dimensions L x W x H: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg

Gamybos metai: 2009, būklė: paruoštas naudoti (naudotas), Siūlomas CNC plokščiastalis tekinimo staklės Optimum. Apsukimų skersmuo virš lovos/vežimo: 280mm/170mm, atstumas tarp centrų: 700mm, veleno skylė: 27mm, apsisukimų dažnis: 4000aps./min, X/Z ašies eiga: 165mm/660mm, X/Z ašies pastūma: 2m/min / 3m/min, įrankių pozicijų: 4, konico eiga: 85mm. Staklių matmenys X/Y/Z: apie 2000mm/750mm/1550mm, svoris: apie 450kg, valdymas: Siemens Sinumerik. Yra dokumentacija. Galima apžiūra vietoje. Djdpfx Ahjyypliorouw

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, The machine is currently on display. Optimill F 300 HSC Premium CNC milling machine directly from the manufacturer. F 300 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system is distinguished by its performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile rails with roller guides on all axes for high load capacities • High-torque servo drives directly mounted to the ball screws on all three axes • Precision-ground, preloaded high-performance ball screws for rapid traverse speeds on all axes • Telescoping guideway covers on all three axes • Main spindle SK40 with spindle speed up to 15,000 rpm with inline spindle • Heavy, precise milling table with five T-slots, large dimensions, and precision ground • Portable electronic handwheel with enabling button and emergency stop impact switch greatly facilitates program setup • Tool changer with double-arm gripper, 30 tool positions • Coolant system with chip flushing and cleaning pistol • Through-spindle coolant, 20 bar • Belt-type chip conveyor for efficient chip removal • Chip carriage • Oil separator • Work area machine light • SIEMENS supplementary package: material defect liability and free online/on-site service OSS Plus • 1-year basic maintenance contract included (within Germany / Austria / Switzerland) Control: • 15.6" color display • 16:9 format • Comprehensive package • Safety Integrated • Remnant material detection and processing • ShopMill process programming • Network drive management • 3-D simulation • Program tracing • Siemens OSS PLUS supplementary package • 12 months; Art. No. 3589020 • 24 months; Art. No. 3589021 • 36 months; Art. No. 3589022 Technical Specifications: • Inline spindle • Taper: SK 40 / DIN 69871 • Spindle speed: 15,000 rpm Dimensions and Weights: • Length approx. 2856 mm • Width/depth approx. 2300 mm • Height approx. 2850 mm • Weight approx. 6500 kg Rapid traverse speed: • X-axis: 36 m/min • Y-axis: 36 m/min • Z-axis: 32 m/min Electrical Data: • Connected voltage: 400 V • Network frequency: 50 Hz • Electrical connection • Total connected load: 30 kVA Dujdeymd Epepfx Ahrsw Milling Table (horizontal): • Length: 1200 mm • Width: 600 mm • T-slot size: 18 mm • Number of T-slots: 5 • T-slot spacing: 100 mm • Maximum load capacity: 800 kg Accuracy: • Repeatability: ± 0.005 mm • Positioning accuracy: ± 0.005 mm Travel: • X-axis (auto): 1000 mm • Y-axis (auto): 620 mm • Z-axis (auto): 630 mm Vertical Spindle: • Spindle taper: SK 40 DIN 69871 • Speed range: 15,000 rpm • Main drive motor power S1 continuous operation: 20 kW • Main drive motor power S6-30% operation: 52.4 kW • Main drive torque S1 continuous: 96 Nm • Main drive torque S6 30% duty: 250 Nm Feed Force: • Feed force X-axis: 6.68 kN • Feed force Y-axis: 6.68 kN • Feed force Z-axis: 12.01 kN Feed Motor Torque: • X-axis S1 continuous: 20 Nm • Y-axis S1 continuous: 20 Nm • Z-axis S1 continuous: 36 Nm Tool Changer: • Double-arm gripper • Number of tool pockets: 30 • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Tool change time (tool-to-tool): 2.5 s

Būklė: paruoštas naudoti (naudotas), Parduodamas pramoninis CNC frezavimo staklės – AXYZ Automation Group Automation serijos 6010, su aukštos spartos Perske GmbH velenu. Tai didelio formato gamybinis įrenginys, tinkamas darbui su mediena, plastiku, iškabų gamybai ir lengvam aliuminio apdirbimui. Tvirta portalinė konstrukcija su vakuuminiu stalu – idealiai tinka lakštinėms medžiagoms. ⚙️ Pagrindinės specifikacijos Modelis: AXYZ 6010 (6000 serija) Stalo dydis: apie 3048 x 2150 mm (10 x 6 pėdos) Dodpfxjy A R Dxo Ahrjuw Velenas: Perske aukštos spartos velenas Galia: apie 4 kW / 5,5 AG Apsisukimai: iki 18 000–21 000 aps./min. Stalas: vakuuminis (tinklinio tipo) Ašys: 3 ašių portalinis CNC Maitinimas: 3 fazės Konstrukcija: sunki pramoninė rėmo

Būklė: naudotas, Gamybos metai: 2015, Eigos keliai (X,Y,Z): 6175x1550x300 mm Vertikalaus gręžimo galvutės velenų skaičius: 20 vnt. Horizontalaus gręžimo galvutės velenų skaičius: 10 vnt. Frezuoklių agregatų skaičius: 1 vnt. Sūkių dažnis: 24.000 aps./min. Siurblio našumas: 300 kg/val. Pjūklo agregatas: taip Valdymas: Homag PC85 CNC powerTouch Modelis: HOMAG BMG 511 /60/12/F/K Profi ----- - 5 ašių CNC apdirbimo centras - Vartomas portalinis apdirbimo staklės tipo gantry, su abipusiu pavaros mechanizmu - 1 frezavimo galvutė HOMAG DRIVE 5 C+, 5 ašių, HSK-F63, 15 kW, max. 24.000 aps./min. - 1 HOMAG Multi Processing Unit GRĘŽIMO GALVUTĖ 30 VELENŲ: V20 / H10/ S360° "MPU" MultiProcessingUnit su C ašimi +/- 185° - 1 grandininis keitiklis, 30 vietų - Įskaitant SL lazerinį projektorių - Įskaitant vakuuminius siurbtuvus, esančius kaip komplekte - Atsarginės dalys ir priedai kaip matosi nuotraukose - Paskutinė HOMAG 5 ašių techninė priežiūra – 2024 m. - Kitas HOMAG aptarnavimas – 2025 m. - Kaina įskaitant profesionalų išrinkimą ir pakrovimą į kliento sunkvežimį - Pakrovimo rėmų/transporto draudimo išlaidos NEĮSKAIČIUOTOS, žr. pastabą aprašymo pabaigoje Techniniai duomenys ----- Didžiausias ruošinio ilgis: Visi agregatai: pavieniui 6.000 mm, švytuoklinis režimas min. 1550 mm, maks. 3.200 mm Įrankio skersmuo 25 mm: pavieniui 6.175 mm, švytuoklinis režimas min. 1550 mm, maks. 3.200 mm Didžiausias ruošinio plotis: Visi agregatai, atrama priekyje 1.100 mm Frezavimas su įrankiu skersmuo 25 mm: atrama priekyje 1.325 mm, gale 1.550 mm Ruošinio storis: Maks. 300 mm (įskaitant tvirtinimo elementus) Frezavimo galvutė ir gręžimo agregatas ----- 2 nepriklausomos Z ašys 1 frezavimo galvutė HOMAG DRIVE 5 C+, 5 ašių, HSK-F63, 15 kW, max. 24.000 aps./min. Skysčio aušinama frezavimo galvutė, DRIVE5C+ jungtis su 3 taškų sukimo momento atrama 1 HOMAG Multi Processing Unit GRĘŽIMO GALVUTĖ 30 VELENŲ: V20 / H10/ S360° "MPU" MultiProcessingUnit su C ašimi +/- 185° skirta gręžimo ir pjovimo operacijoms bet kokiu kampu 1 variklis 2,3 kW, dažnio reguliatorius, didžiausias sūkių dažnis 7500 aps./min. programiškai pasirinkimas greitam apdirbimui net su mažais skersmenimis 20 vertikalių "high-speed" velenų 10 horizontalių velenų 1 griovelio ir skyrimo pjūklas Įskaitant Z ašies modulį Įskaitant dulkių ištraukimo gaubtą Įrankių keityklė: ----- 1 "Pick-Up" vieta pjūklui 350 mm DRIVE5(C)+ 1 grandininis keitiklis 30 vietų D=80 Įrankiams ir agregatams su HSK-F63 jungtimi Grandininis keitiklis, skirtas 30 įrankių/agregatų pozicijoms, naudojamiems su 1 pagrindine galvute 1 dvigubas griebtuvas greitam įrankių keitimui Konsolinė stalo sistema ----- 12 konsolių Y=1500 mm K-stalui 6 pakeliamieji HPL bėgeliai, kėlimo eiga 100 mm Papildoma įranga: ----- SPEED PACK: didžiausio X ašies judėjimo greičio padidinimas iki 80 m/min, vektorinė greitis = 110 m/min Padėties nustatymo pagalbinis lazerinis kontūras 1 vakuuminis siurblys 300 m³/h Skiedrų transporterio juosta su prailginimu Vakuuminiai spaustuvai SL lazeris Energiją taupantis penkių ašių ištraukimo gaubtas Saugos įrenginiai: ----- Lazeris, buferis SAFESCAN SPEED PACK CE ženklinimas HOMAG Speed Pack HOMAG kokybės paketas Uždara grandininė kabelių sistema Valdymas: ----- Powercontrol PC85 Homag powerTouch Rankinis valdymo pultas HOMAG IPC Powerpack Dujdezhcg Hspfx Ahrew Programinė įranga: ----- HOMAG WoodWop 7.1 Diagnostikos sistema Woodscout...

Būklė: naudotas, Ilgis: 2750 mm Plotis: 1100 mm Aukštis: 2050 mm Svoris apie: 3500 kg Slėgis: 50 Lenkimo ilgis: 2550 mm CNC lenkimo presas, 3 ašys Y1, Y2 ir Z Hidraulinis viršutinio įrankio tvirtinimas Darley sistema Techninės detalės: Staklių tipas: EHP 50.25/20 Maks. spaudimo jėga: 500 kN Lenkimo ilgis: 2550 mm Nuleidimo greitis: 100 mm/s Dedpfx Ahowiatporjuw Maks. spaudimo greitis: 13,5 mm/s Grįžimo greitis: 75 mm/s Eigos ilgis: 120 mm Cilindrų skaičius: 2 vnt. Variklio galia: 5,5 kW Alyvos bakas: 100 l

Būklė: naudotas, Gamybos metai: 2011, Slėgis: 400 tonų Lenkimo ilgis: 4050 mm Duedpjvfy Sxjfx Ahrew Statramsčių tarpas: 3400 mm Variklio galia: 37,5 kW Svoris apytiksliai: 25 000 kg Matmenys (IxPxA): 5750 x 2110 x 3440 mm SANDĖLIO IŠPARDAVIMAS – NEĮTIKĖTINA KAINA! CNC lankstymo presas DURMA AD-S 40400 (4 m x 400 t) (Nauja kaina apie 170 000 EUR) Techniniai duomenys: Gamintojas: DURMA Modelis: AD-S 40400 Metai: 2011 Lenkimo ilgis: 4050 mm Presavimo jėga: 400 tonų Ašys: Y1, Y2, X, R + CNC valdomas bombiravimas Variklio galingumas: 37 kW Įranga ir privalumai: CNC bombiravimas – varikliu reguliuojamas per valdymą Viršutinis įrankis: 1010/A/75°, segmentuotas, su nusmailinimu Matrica: Multi-V matrica CNC valdomas galinis atmušėjas 2 lakštų padėjimo atramos su tiesine kreiptimi CE atitinkanti lazerinė apsaugos sistema (Lasersafe) ant viršutinio stalo Mašina atitinka galiojančius CE reikalavimus Įdiegta nauja pompa Mašina parduodama esamos būklės. Mašina įsigyta bankroto procedūros metu ir perkelta į mūsų salę. Pagrindinės funkcijos „aukštyn“ ir „žemyn“ buvo patikrintos ir veikia. Dėl kitos techninės būklės ar funkcionalumo negalime pateikti daugiau duomenų. Apžiūra vietoje įmanoma susitarus. Pardavimas vykdomas taip, kaip apžiūrėta ir be garantijos. Išskirtinė galimybė – iš karto sandėlyje! Tik 1 vienetas sandėlyje – tiesiogiai iš vietos – be laukimo! Pasinaudokite šia reta galimybe įsigyti aukštos našumo mašiną už dalį naujos kainos.

Būklė: naudotas, Gamybos metai: 2011, Spaudimas: 400 lenkimo ilgis: 4050 atstumas tarp stulpų: 3400 srovė: 37,5 KW svoris apie: 25.000 matmenys (Ilg. x Pl. x Aukšt.): 5750 x 2110 x 3440 SANDĖLIO IŠPARDAVIMAS – NEĮTIKĖTINA KAINA! CNC lankstymo presas DURMA AD-S 40400 (4 m x 400 t) (Naujos kaina apie 170 000 EUR) Techniniai duomenys: Gamintojas: DURMA Modelis: AD-S 40400 Pagaminimo metai: 2011 Lenkimo ilgis: 4.050 mm Presavimo jėga: 400 tonų Ašys: Y1, Y2, X, R + CNC valdomas bombiravimas Variklio galia: 37 kW Įranga ir akcentai: CNC bombiravimas – varikliu reguliuojamas per valdymą Viršutinis įrankis: 1010/A/75° segmentuotas, užlenktas Matricos: Multi-V matrica CNC valdomas galinis atmušėjas 2 lakštų atraminės rankos su linijiniu kreipikliu CE atitikties lazerinė apsauga „Lasersafe“ ant viršutinio balkio Mašina atitinka galiojančius CE reikalavimus įdiegta nauja pompa Mašina parduodama esamos būklės. Mašina buvo įsigyta bankroto bylai vykstant ir po to atgabenta į mūsų sandėlį. Pagrindinės funkcijos „aukštyn“ ir „žemyn“ patikrintos ir veikia. Daugiau techninės būklės ar veikimo duomenų pateikti negalime. Apžiūra vietoje galima susitarus. Duodpfx Ajv Rtg Tehrsw Pardavimas vykdomas kaip matyta, be garantijos. Išskirtinė galimybė – iš karto prieinama! Sandėlyje tik 1 vnt. – tiesiogiai iš vietos – jokių laukimo eilių! Pasinaudokite šia reta proga įsigyti aukštos našumo įrenginį už nedidelę naujos kainos dalį.