Mit Drehteller Drehteller 285 Mm pirkti naudotą (86 216)

Būklė: geras (naudotas), Oxy-fuel cutting device with turntable, ideal for welding bevel cutting. Turntable diameter: 285 mm; maximum cutting diameter: 600 mm; total height: 1,150 mm; width: 900 mm; depth: 500 mm. Nlodpfxjd Dti Is Aa Dsd

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base Frame / Ø 2,200 mm Max. pallet size: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm Nlodoykub Aepfx Aa Dod FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upwards/downwards Acoustic signal at wrapping start and at cycle end Emergency stop switch according to CE regulations Turntable always stops at the same starting position Anti-fall device for the film carriage Push button for machine power-on, start & stop function, and reset per CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 - Display/program lock F02 - Continuously variable turntable speed 5-12 rpm Carriage travel speed upwards and downwards adjustable independently F03 - Carriage travel speed upwards from 1.3 to 5.4 m/min F04 - Carriage travel speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 wraps) F06 - Number of wraps at pallet top (1 - 10 wraps) F09 - Photoelectric cell delay for wrapping height F13 - F16 - Film application tension for bottom & top wraps / ascent & descent adjustable independently F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 programmable wrapping cycles F01 - 1 - Cross wrapping (upwards/downwards) F01 - 2 - Single wrapping (upwards only or downwards only) F01 - 3 - Push button for manual functions F10 - F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to a preset height (disables height detection photoeye) F22 / F23 - Wrapping cycle for top sheet application F29 - Soft start cycle for corner protection F30 - F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet corners Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button Optional: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Mounting frame Photoelectric sensor for dark products Film cutting device etc. Further systems available ex-stock Ludwigsburg. Images may contain optional extras subject to surcharge. Image similar

Gamybos metai: 2000, būklė: labai geros būklės (naudotas), Steady Rest Bore 520 mm Nodpfx Aofgwi Rja Dsld Center Height with Base 970 mm Center Height without Base 650 mm Quill Diameter 100 mm

Būklė: labai geros būklės (naudotas), Clamping plate with T-slots Nedpfxsfm Tq Ts Aa Dold diameter 485 mm bolt circle diameter 118 mm hole spacing 170 mm

Būklė: geras (naudotas), Technical Data for Pallet Racking Beam: Racking System: Nedcon Type: NS The scope of delivery includes: 01x Pallet racking beam, used incl. internal angle bracket for chipboard thickness up to: approx. 38 mm Material color: orange Box section: 110 x 40 mm Connector: 4HK (hooks) Clear span: approx. 3,000 mm Nlodpfx Aot Et T Sja Dsd 02x Safety pins, used Version: fully galvanized For securing the cross beams against unintentional lifting General information about the item: This item is only available for collection. If transport or shipping of this item is required, additional costs will be incurred, which can be requested from us separately depending on the place of delivery and scope of delivery.

Būklė: geras (naudotas), Note: This is a used steel locker. Minor damages (e.g., scratches, dents, soiling, or similar) may be present. Scope of delivery: 01x steel locker with sloped roof, used Body colour: grey Door colour: grey Number of doors: 2 pcs., with ventilation grille Door handle: rotary latch lock Overall width: approx. 610 mm Overall depth: approx. 500 mm Overall height: approx. 1,895 mm Weight: approx. 50.0 kg Compartment division per door: Door handle: 01x rotary latch lock Compartment dimensions: approx. 285 x 490 x 1,600 mm (W x D x H) Clothes rail: 01x pc. | approx. 280 mm Top shelf: approx. 285 x 307 x 400 mm (W x D x H) Lockable with a padlock (padlock not included in delivery) 01x substructure bench with shoe rack Dimensions: approx. 610 x 810 x 410 mm (W x D x H) Shoe rack dimensions: approx. 570 x 285 mm (W x D) Weight: approx. 15.0 kg Overall dimension: approx. 610 x 800 x 2,305 mm (W x D x H) Nedpfx Aaowaa D Ae Djld Currently in stock: approx. 21 pcs. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be quoted separately depending on delivery location and scope of delivery.

Būklė: geras (naudotas), Included in the scope of delivery: 01x Steel door, used Version: DIN – Right-handed Material color: grey Total height: 2,210 mm Total width including frame: 750 mm Frame profile: RR 50x50 mm Door height: 2,110 mm Door width: 620 mm Door frame profile: RR 25x25 mm Mesh size: 105x22 mm Clear passage width: 645 mm Base plate dimension: 140x50 mm Weight | per unit: 25.76 kg Note: Door handle set and lock, as well as keys, Nsdetp Hkaepfx Aa Deld are not included in the scope of delivery. Currently available from stock: 25 units. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for self-collection. If transport or shipping is required beyond this, it is subject to additional costs, which can be requested separately depending on the delivery location and scope.

Būklė: labai geros būklės (naudotas), Four-jaw scroll chuck Diameter 315 mm Chuck height (flange) 125 mm Short taper mount size 6 Taper diameter 106.39 mm Pitch circle diameter for studs 133.4 mm 4 studs M12 Accessories: 1 chuck key 1 set of hard top jaws 1 set of hard step jaws Weight 103 kg Nljdpfx Aajlguy Sj Dod Transport dimensions: W800 x D600 x H550 mm

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25MythoSarya05, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level access for pallet trucks and electric pallet jacks MAST VERSION Wrapping height 2,450 mm Nodpfeykuh Njx Aa Dsld 99 programs 7" TOUCH display FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% pre-stretch, optionally with more or less pre-stretch available TURNING TABLE / TP Ø1,650 mm / Opening at 6 o'clock - Mast at 12 o'clock (can be adjusted at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Gamybos metai: 2021, veikimo valandos: 10 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S21MythoEasyLow04, Ex-demo machine – like new. MYTHO EASY Low Nsdpfx Ajx Ta Nxja Djld Very low-profile design Wrapping height: 2400 mm Turntable: 1650 mm LP flat turntable, 30 mm low profile – 500 mm long Max. load weight: 1200 kg PowerStretch 200%; gear changeable to 150-200-250% Automatic adjustable double-rope formation – see photos. Automatic film cutting Optional: Film clamp on turntable German Schuko plug 6 individually programmable settings Further demonstration units available from stock for immediate delivery. Prices ex stock Ludwigsburg

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level access for pallet trucks and electric pallet jacks Nljdpfxsykud Rj Aa Ded MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% pre-stretch, optionally with more or less pre-stretch available TURNING TABLE / TP Ø1,650 mm / Opening at 6 o'clock - Mast at 12 o'clock (can be adjusted at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Gamybos metai: 2025, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level access for pallet trucks and electric pallet jacks MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% pre-stretch, optionally with more or less pre-stretch available TURNING TABLE / TP Ø1,650 mm / Opening at 6 o'clock - Mast at 12 o'clock (can be adjusted at any time) Nodpfxoyktrte Aa Djld ARYA system for automatic film application and cutting, incl. infrared remote control

Būklė: naujas, Gamybos metai: 2023, Spaudimo jėga 6,2 t Lenkimo ilgis 285 mm Atstumas tarp stulpų 230 mm Montavimo aukštis 215 mm Išsikišimas 70 mm Eiga 100 mm Darbinis greitis 9,8 mm/s Grįžtamasis greitis 50 mm/s Alyvos kiekis 10 l Valdymo sistema DELEM DA 41T Bendrasis galios poreikis 0,7 kW Mašinos svoris apie 250 kg Matmenys (ilgis x plotis x aukštis) 900 x 1300 x 550 mm Eksponuojama mašina • Pagrindinė versija su C formos rėmu • Kompaktiškas stalinės konstrukcijos modelis • Idealiai tinka prototipų gamybai ir mažų serijų produkcijai • Labai greitas nustatymo laikas • Paprastas valdymas • Platus panaudojimo spektras • Žemas triukšmo lygis • Mažas energijos suvartojimas • Lengva valdyti Nedpfx Aaozlulce Dsld Įskaitant specialią įrangą: - CNC valdymo sistema DELEM DA 41T

Būklė: geras (naudotas), 2 vnt. AMF tinklelio plokštė, 415 mm x 740 mm, aukštis 50 mm. Tinklelio žingsnis 40 x 40 mm, tikslumo skylės 16 H7 ir srieginės M12. Su liejiniu po plokšte, aukštis 100 mm. Nedpsziwzhjfx Aa Dold

Gamybos metai: 2009, būklė: naudotas, Conveyor belt, belt conveyor, transport belt, belt band conveyor - Conveyor belt with automatic lifting and rotating device - Belt width: 2x 50 mm, length 2385 mm - Distance: 410 mm - Gear motor: Lenze 0.55 kW Nledpfx Aaog S R S Sj Dod - Speed: 51–293 rpm - Belt speed: 11–65 m/min - Overall dimensions: 1265/815/H740 mm - Weight: approx. 248 kg

Būklė: naudotas, Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers - Roller diameter: 80 mm - Transport roller width: 800 mm - Total length: 830 mm - Sprocket: 1/2" x 11 teeth Nledpfx Aedbhlqsa Ded - Threaded bore: M8 - Quantity: 41 rollers available - Price: per piece - Weight: 4.1 kg/unit

Būklė: geras (naudotas), Extension for square drive, square drive extension, tap extension, die extension - Square drive extension: tap extension, die extension - Square size: 32 x 32 mm - Total length: 285 mm - Quantity: 2 extensions available Njdpswu Rnbofx Aa Deld - Price: per piece - Dimensions: Ø55 x 285 mm - Weight: 3.1 kg/pc.

Būklė: geras (naudotas), Staklės mašinoms, stabilios staklės, gręžimo staklių staklės -Staklės mašinoms: žandų matmenys 200 x 55 mm -Suspaudimo gylis: 285 mm -Matmenys: 650/200/H145 mm -Svoris: 65,8 kg Nlodsxupuwspfx Aa Dsd

Būklė: geras (naudotas), Atrama, giluminis atstojiklis, ilgio atstojiklis skerspjovėjui, traukiančiai pjūkleliui ... - Tvirtinimas: Bosch profilis - Ilgio matavimo vienetas: 2000 mm - Kaina: pilnas komplektas Njdpfx Aedapm Roa Djld - Matmenys: 2215/100/H1000 mm - Svoris: 10 kg

Būklė: geras (naudotas), Indexable insert drill, high-performance drill with indexable inserts, solid drill, end mill, shank cutter, milling cutter, indexable insert milling cutter, shank cutter with internal cooling, indexable insert shank cutter Nlodpfx Aork S Dqsa Ded - End mills: Indexable insert shank cutters with internal cooling, 8 pieces - Mount: Ø 32 mm - Diameter: 32 to 43 mm, see photos / item list - Sale/price: complete - Transport dimensions: 400/200/H60 mm - Weight: 8.7 kg

Būklė: geras (naudotas), Lenkimo įrankis, matrica, apatinis peilis, apatinis įrankis, prizminis įrankis Nlodpex S Ea Tsfx Aa Dsd - Įrankis: skirta lankstymo presui - Bendras ilgis: 285 mm - Plotis/aukštis: 100/120 mm - Matmenys: žr. brėžinį nuotraukose - Svoris: 23,7 kg

Būklė: naudotas, Boring head, spindle head, drill head, parting drill head, parting head, spindle boring head, line boring head, spindle tool, trepanning drill, cutter head Nsdok Hdtxepfx Aa Djld - Trepanning drill: Drill head/cutter head equipped with coolant system - Drilling diameter: 62 mm - Mount: MT4 - Dimensions: 740/76/107 mm - Weight: 5.4 kg

Būklė: naudotas, Indexable insert drill, high-performance drill with indexable inserts, solid drill, end mill, shank cutter, milling cutter, indexable insert milling cutter, shank cutter with internal cooling, indexable insert shank cutter Njdpfxsrk S D Ae Aa Dold - Delivery: as-is condition as inspected - Indexable insert: 1 piece missing - End mill: indexable insert shank cutter with internal cooling - Mount: Ø 30 mm - Diameter: 16 mm - Dimensions: 133/40/H40 mm - Weight: 0.4 kg

Būklė: geras (naudotas), Machine vice, heavy-duty vice, drill press vice -Machine vice: rotatable -Clamping jaws: 240 x 60 mm -Clamping depth: 285 mm -Dimensions: 630/315/H200 mm -Weight: 73 kg Nljdpfxshikzze Aa Dsd

Būklė: naudotas, Boring head, spindle head, drilling head, parting boring head, parting head, spindle drilling head, boring tool head, spindle tool, peel drill, cutting head - Peel drill: drilling head/cutting head with coolant device - Drilling diameter: 70 mm - Mount: Morse taper 5 (MT5) - Dimensions: 825/65/70 mm Nledpfek Hdtmjx Aa Dod - Weight: 18 kg