Lefa Zpm 60 Liter pirkti naudotą (25 562)

Būklė: geras (naudotas), Gamybos metai: 1996, Hidraulinės alyvos bakas, hidraulinės alyvos talpa, hidraulinis bakas - Hidraulinės alyvos bakas: su priedais - Talpa: apie 60 litrų Laodpfx Aspix Nceauja - Atskiros dalys: žr. nuotraukas - Matmenys: 730/670/H620 mm - Svoris: 74 kg

Būklė: naujas, Our SAPI pressure blasting unit type "Mammut" with a 60-litre tank capacity is suitable for all common blasting media. The blasting pressure can be infinitely adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit also features a permanently mounted water separator, which extracts moisture from the compressed air and thus prevents the blasting media from clumping due to excessive humidity. For safe operation, our safety shut-off system is included. This allows starting and stopping of the blasting process via an operating lever mounted on the blasting hose. Delivery includes: - SAPI pressure blasting unit "Mammut 60 L" - Pressure regulator 1", permanently installed - Water separator 1", permanently installed - SAPI safety shut-off system Technical specifications pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV certified with certificate - Fixed 1" piping, internal and external Lsdpfswc Afhjx Aausaa - Rubber-coated metal cone with rubber seal - Generously sized hand hole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 60 l - Overall height: 1,130 mm - Vessel diameter: 360 mm - Total diameter: 700 mm - Weight: approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT WITH SAFETY SHUT-OFF: - Extremely fast switching on and off times, complying with industrial safety regulations (VBG 48) - Pressure setting can be fine-tuned accurately prior to blasting, infinitely adjustable from 0.1 – 12.0 bar - Lower blasting media consumption, as the pressure vessel remains constantly pressurized and thus no unnecessary media run-on occurs - Upon restarting, full blasting pressure is immediately available at the nozzle, eliminating delay; this results in significantly lower media consumption and reduced wear on the blasting hose - No moisture formation (condensate) in the vessel, as it remains continuously pressurized, avoiding ventilation during each start and stop; this procedure offers additional benefits: - Optimal blasting media dosing with hardened fine adjustment valve - Reduced compressed air demand, significantly lowering fuel (diesel) consumption - Single-person operation, as the vessel pressure is continuously displayed and can be conveniently adjusted via the pressure gauge without prior startup - No failure-prone components such as control valves, membranes, or seals, resulting in high operational reliability and low maintenance. Only the hose in the safety shut-off needs to be inspected and replaced if necessary.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, mašinos/transporto priemonės numeris: SN49983, Funkcionalumas: visiškai funkcionalus, Kamerinė krosnis, labai gera būklė. 12 mėnesių garantija -Maksimali temperatūra: 1300 °C -Vidinės matmenys (plotis × gylis × aukštis): 400 × 400 × 400 mm -Talpa: 60 litrų -Atskiras pagrindinis jungiklis -5 pusių kaitinimo sistema -Privadavimo ir ištraukiamo oro sklendės, elektriškai valdomos su Belimo pavaromis Lsdpfx Aasx U Ekdsueaa -Privadavimo ventiliatorius su dažnio keitikliu, valdomas per reguliatorių -Valdymo sistema JUMO (galima perjungti į kitas kalbas) -Papildomas vilkimo elementas, tipas S, išoriniam registravimui -Dokumentacija -Svoris: 250 kg -Galingumas: 18 kW -Srovės suvartojimas: 26 A -Prisijungimo įtampa: 3/N/PE 400V AC -Pajungimo variantas: paruošta fiksuotam pajungimui, 32 A kištukas -Dokumentacija, CE atitikties deklaracija -Elektriškai patikrinta ir su galiojančiu DGUV matavimo protokolu Apžiūra pagal susitarimą. Krosnis, krosnys, kaitinimo krosnis, pramoninė krosnis, kamerinė krosnis, degimo krosnis, džiovinimo krosnis, atsparumo krosnis, laboratorinė krosnis, grūdinimo krosnis

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2017, mašinos/transporto priemonės numeris: SN48357, Funkcionalumas: visiškai funkcionalus, Kamerinė krosnis su ištraukiamu gaubtu, labai geros būklės. 12 mėn. garantija - Maksimali temperatūra 1300 °C - Vidaus matmenys (P x G x A): 400 x 400 x 400 mm - Talpa: 60 litrų - Atskiras pagrindinis jungiklis - 5 pusių kaitinimo sistema - Tiekiamo ir išsiurbiamo oro sklendės, valdomos elektriniu 'Belimo' pavara - Įpūtimo ventiliatorius su dažnio keitikliu, valdomas reguliatoriumi - Iš nerūdijančio plieno ištraukiamas gaubtas - Valdymo sistema 'Bentrup 507', tiristorinis valdymas - Valdiklio kalba – vokiečių, pakeisti į kitą kalbą negalima - Papildomas registravimo elementas S tipo išoriniam įrašymui - Dokumentacija - Svoris: 250 kg - Galia: 18 kW - Srovės stipris: 26 A - Prisijungimo įtampa: 3/N/PE 400 V AC - Prisijungimo tipas: paruošta pastoviam pajungimui, 32 A kištukas - Dokumentacija, CE atitikties deklaracija - Elektriškai patikrinta su galiojančiu DGUV matavimo protokolu Apžiūra pagal susitarimą. Lasdpfxstbq Eqo Aauea Krosnis, krosnys, glūdinimo krosnis, pramoninė krosnis, kamerinė krosnis, degimo krosnis, įdegimo krosnis, atleiskimo krosnis, laboratorinė krosnis, grūdinimo krosnis

Būklė: naujas, KAINA: 1.800 EUR Įrenginiui būdingas paprastas valdymas, lengvas valymas ir priežiūra bei stabilumas darbo metu. Tinka mėsos perdirbimo įmonėms, restoranams, virtuvėms ir kitoms maitinimo įstaigoms. Matmenys: 850×450×850 mm Laodpfx Aeikvrdeausa Elektros galia: 0,12 kW Talpa: 60 litrų Pristatymo laikas: iš karto po avansinio apmokėjimo (100%)

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, New machine 24 months warranty Advantages: + Excellent price-performance ratio + Powerful planetary mixer with digital controls + 10 speeds with constant power transmission + Equipped with ingredient chute and stainless steel safety guard Lasdehydmdepfx Aauja + Automatic immediate shutdown when the safety guard is lifted + Integrated dust/splash protection cover + Machine is mounted on 4 vibration-absorbing feet + No floor anchoring required + Hydraulic bowl lift with two safety switches + Bowl support arms made of stainless steel + Enclosed planetary gear made of stainless steel + Can also be optionally used with 60-liter equipment + Fast spare parts supply within 1-2 working days STANDARD accessories, included in the price: - 1x 80-liter stainless steel bowl - 1x whisk for 80-liter bowl - 1x flat beater for 80-liter bowl - 1x dough hook for 80-liter bowl SPECIAL accessories, optionally available at extra cost (prices on request): - Additional 80-liter stainless steel bowl - Additional tools (whisk, flat beater, dough hook) - Bowl trolley for 80-liter bowl - 60-liter kit (1x 60-liter stainless steel bowl + 3 tools for 60-liter bowl) - Bowl trolley for 60-liter bowl Technical specifications: - Motor power: 4.5 kW - RPM at 50Hz: 133 - 400 (level 1 - 10) - Protection: 16A CEE plug - Electrical connection: 400V - 3Ph - 50Hz - Dimensions: 720 x 1050 x 1660 mm (W x D x H) - Max. 1910 mm height when hood is open - Net weight: 450 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, New machine 24-month warranty Benefits: + Excellent price-performance ratio + Powerful planetary mixer with digital control + 10 speeds with constant power transmission + With ingredient chute and stainless steel safety guard + Automatic machine shutdown when the guard is lifted + Integrated dust/splatter protection cover + Machine stands on 4 vibration-absorbing adjustable feet + No floor anchoring required + Bowl lift operated by lever + Bowl arms made of stainless steel + Enclosed planetary gearbox made of stainless steel + Can be optionally used with 30-liter equipment + Fast spare parts supply within 1-2 working days STANDARD accessories, included in the price: - 1x 60-liter stainless steel bowl - 1x whisk for 60-liter bowl Laedpfx Aaehydl Isuoa - 1x flat beater for 60-liter bowl - 1x dough hook for 60-liter bowl SPECIAL accessories, optionally available at extra cost (prices on request): - Additional 60-liter stainless steel bowls - Additional tools (whisk, flat beater, dough hook) - Bowl trolley for 60-liter bowl - 30-liter equipment (1x 30-liter stainless steel bowl + 3 tools for 30-liter bowl) Technical data: - Motor power: 3.0 kW - RPM at 50Hz: 165 - 450 (Levels 1 - 10) - Electrical connection: 400V - 3Ph - 50Hz - 16A CEE plug - Dimensions: 690 x 940 x 1470 mm (W x D x H) - Max. 1710 mm height with hood open - Net weight: 300 kg

Būklė: beveik kaip naujas (parodų įrenginys), Note: This is a second-choice product, new and unused. Second-choice means it may have dust deposits, minor scratches, or slight soiling. The oil drip tray is intended for storing containers that are not leak-proof or have been opened, such as paint cans, paint buckets, cleaning agents, etc. The oil drip tray can ideally be placed inside a shelving unit. Scope of delivery includes: 01x Oil Drip Tray, second-choice (new) Manufacturer: SSI Schäfer Type: OAW 4800 Material finish: Sendzimir galvanized Capacity: approx. 60 liters Load capacity: 200.00 kg Overall width: approx. 1,020 mm Usable width: approx. 970 mm Overall depth: approx. 790 mm Usable depth: approx. 784 mm Overall height: approx. 125 mm Usable height: approx. 95 mm Material thickness: approx. 3.00 mm Weight | per unit: approx. 26.960 kg Your contacts at our company: Laedpfon Atm Dex Aauja Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. If transport or shipping is required, this will incur additional costs, which can be provided separately depending on delivery location and quantity.

Būklė: labai geros būklės (naudotas), CTS Model: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60 °C to +170 °C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature test system from CTS GmbH, consisting of a conditioning unit model CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, development, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It provides precise temperature and climate simulations over an extremely wide operating range. This professional climate and temperature conditioning system from CTS GmbH comprises: - Conditioning unit (CSR-60/810/S) - External test chamber (1200 L) The system is designed to supply external test spaces or test chambers with precisely controlled temperature and humidity levels. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, and lifetime testing). Technical Data (from nameplate & manual): General: Manufacturer: CTS GmbH, Hechingen Model: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate: Temperature range: –60 °C to +170 °C Humidity range: 10% to 80% rH Dew point range: +5 °C to +74 °C Electrical data: Lajdsya Ev Nepfx Aauea Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse: 80 A (slow-blow) Connection type: Hardwired Refrigeration system: Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54; Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test chamber 1200 L: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Important safety information for buyers! The following steps are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certificate 4. Upon successful completion, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data and specifications!) We are happy to answer any further questions by phone.

Būklė: labai geros būklės (naudotas), CTS Type: C-40/60 CTS Compact Climate Chamber, Air-cooled Test volume: 60 litres Temperature range: -40 °C / +180 °C Humidity range: 10% to 98% relative humidity +10 °C to +90 °C within temperature range +5 °C to +89.5 °C within dew point range Dimensions (W x D x H): Internal: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Rated voltage: 230V 1/N 50 Hz Power: 3.3 kW Rated current: 13 A Ledpfx Aaju Hlb Esusaa For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data reserved!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Product Description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is perfectly suited for rapid temperature change tests (e.g. according to IEC, MIL-STD, JEDEC) and has been well maintained. Volume & Internal Dimensions: Test volume: 60 liters Internal basket/test area dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature Ranges & Changeover Ljdpfx Aaexr A R Teuoaa Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between zones): < 10 seconds Heating rate up to 17 °C/min Cooling rate up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature Deviation & Uniformity Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / Capacity & Lifting System Basket/lifting system capacity: 20 kg maximum load Transfer basket secured by protective mesh on all sides Additional Features & Equipment Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical Connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power approx. 8.5 kW Rated current approx. 25 A Recommended fuse 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Buyer Safety Information: For your safety as a buyer, the following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Renewal of refrigerant with legally compliant media if necessary 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data, specifications reserved!) We will be happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), Vötsch Type: VT³ 7006 S2-M Water-cooled Technical Specifications: Maximum test specimen weight: 20 kg Test chamber volume: 60 liters Test chamber dimensions: width 380 mm, depth 430 mm, height 370 mm External dimensions: width 875 mm, depth 1970 mm, height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via transfer carriage) Hot chamber temperature range: +50 °C to +220 °C (calibration value +125 °C) Cold chamber temperature range: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm duct for measurement/supply of the test item SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW Rated current: 25 A Refrigerant: R-404A R-23 Weight: approx. 800 kg Important safety information for you as the buyer! The following procedures are carried out in advance on our offered chambers: Lsdpjx Hglysfx Aausaa 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data and information subject to change and error!) Please feel free to contact us by phone for further questions.

Gamybos metai: 2024, būklė: naujas, Funkcionalumas: visiškai funkcionalus, New machine with 24-month warranty Stainless steel model Laodpfsivdubex Aausa Advantages: + Mobile machine with lockable castors + Fully made of stainless steel + Suitable for production and preparation of choux pastry, pastry cream, chocolate, fondant, fruit jam, coatings, fillings, as well as any product requiring even heating and mixing + Thermal oil circulates in the double jacket design for safe and easy operation + Triple-walled construction for optimal thermal insulation + Equipped with side and bottom scrapers + Electronic thermostat for setting cooking temperature + With timer + Manual or automatic operation possible + Digital temperature display + Kettle tilts easily for emptying via handwheel (optional: with discharge valve) + Two operating speeds + Safety switch in case of overheating + Fast spare parts supply within 1-2 working days SPECIAL accessories, optionally available at extra cost: - Discharge valve for fast, easy emptying: + €860,-- net - Machine with frequency inverter for stepless mixing speed: + €1,275,-- net (Delivery time +5 to 6 weeks) Technical data: - Capacity: 60 liters - Max. temperature: 150°C - Thermal oil volume: 17.5 liters - Heating output: 6 kW - Mixing speed: 46 rpm & 92 rpm (1st / 2nd gear) - Motor power: 0.6 kW / 0.8 kW (1st / 2nd gear) - Electrical connection: 400 V - 3Ph - 50Hz - 32A CEE plug - Dimensions: 960 x 780 x 1635 mm (W x D x H) - Feed height: 1200 mm - Net weight: 150 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, VOLLSTÄNDIGE PELLET-PRODUKTIONSLINIE 6 t/h Laodpeqy Hcdefx Aauoa Hydraulische Schubböden – doppelt, geeignet für Hart- und Weichholz 12 m Förderband mit Magnetabscheider für Hackschnitzel Zwei Hammermühlen mit jeweils 130 kW für Nassmaterial Zwei Träger mit hydraulischem Schubboden vor dem Trommeltrockner Trommeltrockner mit 12 m Länge FIEDLER Kessel 3,5 MW Refiner 250 kW mit Transportventilator und Filter ZEPI-Silobehälter für Trockenmaterial ZEPI-Z-Förderer oberhalb von drei Silobehältern für Pelletpresse TRI Pelletpresse ZEPI ZPM600 mit 200 kW (2 Stück) und 160 kW Baujahr Pelletpresse: 2015 (zwei Stück) 10 m Förderband für heiße Pellets, Konditionierer sowie Aspirationssystem Vibrosieb ESSEGI Verpackungsanlage (ITA) Baujahr 2019 Palettiersystem ROBOTIK KOGLER (SLO) Baujahr 2015 Grecon Funkenüberwachungssystem Elektroschaltraum für die komplette Ausrüstung Anlage in Betrieb, Kapazität 6–7 t/h

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, used sourdough machine Isern Häger 600 RMS, for 1000 liters, in bakery condition (good condition), machine no. 06910004, 2.3 kW, 400 V, 50 Hz, weight 420 kg Laodpfxswwwdhe Aauja

Būklė: naujas, Gamybos metai: 2026, Kilia kapotuvas Vakuum 30 6000 Vario Peilio sukimosi greitis maišant/pjaunant (APS): 500–5100, kintamas Peilio greitis (m/s): 80 Peilių pavara be pakopų Dubens pavara be pakopų Vakuuminis dangtis hidraulinis Išjungimas pagal laiką / apsisukimus Išjungimas pagal temperatūrą Ljdpjyv Uwcsfx Aaujaa Centrinis tepimas Nuotolinis valdymas Dubens talpa L/kg: 30 l / 21 kg Dubens apsisukimai APS: 7–20, kintamas Jutiklinis ir rankinis valdymas Elektrinis peilių dangčio pavara: neprivaloma Kaitinimo/šaldymo įranga: neprivaloma Receptų valdymo sistema KPV: neprivaloma Kliento pusės automatinė sauga: 25 A gG/C Nominali prijungimo galia: 15 kW

Būklė: geras (naudotas), Techninė būklė: labai gera Ledpfxoyy Dxqo Aaueaa Išorinė būklė: labai gera Norėdami gauti daugiau informacijos, susisiekite su Ferdinand Pater.

Būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: XLEG6X20005235679, rida: 770 076 km, galia: 265 kW (360,30 AG), pirmoji registracija: 06/2010, kuro tipas: dyzelinas, ašių konfigūracija: 6x2, ratų bazė: 5 450 mm, kuras: dyzelinas, spalva: kitas, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 5, sėdimų vietų skaičius: 2, bendras ilgis: 9 220 mm, bendras plotis: 2 530 mm, leistina ašies apkrova (ašis 1): 9 000 kg, leistina ašies apkrova (ašis 2): 11 500 kg, leistina ašies apkrova (ašis 3): 7 500 kg, Gamybos metai: 2010,

Gamybos metai: 2016, veikimo valandos: 9 195 h, būklė: labai geros būklės (naudotas), Vötsch temperatūros bandymų kamera, vandeniu aušinama Siūlome jums Vötsch temperatūros bandymų kamerą. Vötsch 7060-5 vandens aušinimo kamera Bandymų kameros matmenys: aukštis – 950 mm, plotis – 800 mm, gylis – 800 mm Išoriniai matmenys: aukštis – 1995 mm, plotis – 1090 mm, gylis – 1960 mm Bandomos kameros talpa: apie 600 litrų Pagaminimo metai: 2016 Darbo valandos: 9195 Įvado jungtys: R1: NW 125 mm Lodpfx Aet Txttjauoaa L1: NW 50 mm Temperatūrinių bandymų duomenys: Temperatūros diapazonas: nuo –72°C iki +180°C Temperatūros nuokrypis laike, matuojant erdvės centre: ±0,1 iki ±0,5 K Temperatūros nuokrypis erdvėje: ±0,5 iki ±2,0 K Temperatūros kitimo greitis: Šildymas 6,0 K/min Vėsinimas 6,0 K/min Šilumos kompensacija ties 20°C maks. 5000 W Šilumos kompensacija ties –20°C maks. 5000 W Elektros pajungimas: Nominali įtampa: 3/NPE AC 400V ±10% 50Hz Nominali galia: 13,0 kW, nominali srovė: 23,0 A Šaltnešis: R-404A ir R-23 Svoris (apytiksliai): 650 kg Ši informacija pateikiama jūsų, kaip pirkėjo, saugumui: 1. Kamera veikia nepriekaištingai. 2. Nereikia keisti jokių komponentų. 3. Šaltnešis užpildytas pagal galiojančius teisės aktus. Būklė: naudota (puiki) (Techniniai duomenys ir specifikacijos gali būti keičiami ar tikslinami!)

Gamybos metai: 2016, veikimo valandos: 14 242 h, būklė: labai geros būklės (naudotas), Vötsch Temperierprüfschrank, wassergekühlt Hier bieten wir Ihnen einen Vötsch Temperierprüfschrank an. Vötsch 7060-5, wassergekühlte Kammer Prüfkammer-Innenmaße: Höhe: 950 mm, Breite: 800 mm, Tiefe: 800 mm Außenmaße: Höhe 1.995 mm, Breite: 1.090 mm, Tiefe: 1.960 mm Prüfvolumen der Kammer: ca. 600 Liter Baujahr: 2016 Betriebsstunden: 14.242 Durchführungen: R1: NW 125 mm L1: NW 50 mm Daten zur Temperaturprüfung: Temperaturbereich: -72°C bis +180°C Zeitliche Temperaturkonstanz im Zentrum des nutzbaren Raumes: ±0,1 bis ±0,5 K Räumliche Temperaturabweichung: ±0,5 bis ±2,0 K Temperaturänderungsgeschwindigkeit Heizen 6,0 K/min Kühlen 6,0 K/min Wärmeabfuhr bei 20°C max. 5.000 W Wärmeabfuhr bei -20°C max. 5.000 W Elektrischer Anschluss: Nennspannung: 3/NPE AC 400V ±10% 50Hz Nennleistung: 13,0 kW Nennstrom: 23,0 A Kältemittel: R-404A und R-23 Gewicht (ca.): 650 kg Folgende Informationen dienen Ihrer Sicherheit als Käufer! 1. Die Kammer funktioniert einwandfrei. 2. Es müssen keinerlei Komponenten ersetzt werden. Ljdpfxet Txqrj Aaueaa 3. Das Kältemittel ist vorschriftsmäßig befüllt. Zustand: gebraucht (ausgezeichnet) (Änderungen und Irrtümer bei technischen Daten und Angaben vorbehalten!)

Būklė: geras (naudotas), Vötsch Klimaprüfschrank mit Feuchtefunktion Hier bieten wir Ihnen einen Vötsch Umweltsimulationsschrank mit Feuchteregelung an. Modell: Vötsch 4060-10 luftgekühlt mit Feuchte Innenmaße Prüfraum: Höhe: 950 mm, Breite: 800 mm, Tiefe: 800 mm Außenmaße: Höhe: 2150 mm, Breite: 1225 mm, Tiefe: 2890 mm Prüfkammer-Volumen: ca. 600 Liter Betriebsstunden: 3354 h Baujahr: 2007 Durchführungen: R1: NW 125 mm L1: NW 50 mm Technische Daten für Temperaturprüfungen: Temperaturbereich: -40°C bis +180°C Temperaturabweichung zeitlich im Zentrum des Prüfraumes ± 0,1 bis ± 0,8 K Temperaturabweichung räumlich ± 0,5 bis ± 2,0 K Temperaturänderungsgeschwindigkeit: Heizen: 9,5 K/min Kühlen: 12,0 K/min Wärmekompensation bei 20°C: max. 8000 W Wärmekompensation bei -20°C: max. 3000 W Technische Daten für Klima-/Feuchteprüfungen: Temperaturbereich: +10°C bis +95°C Feuchtebereich: 10% bis 95% r.F. Temperaturhomogenität zeitlich ± 0,1 bis ± 0,5 K Temperaturhomogenität räumlich ± 0,5 bis ± 1,0 K Feuchteabweichung zeitlich 1 bis 3 % r.F. Ledpst E Sfgefx Aaujaa Nennspannung: 3/NPE AC 400V ±10% 50Hz Nennleistung: 16,0 kW Nennstrom: 26,0 A Kältemittel: R-404A Ein Paar Schienen zur Rollaufnahme vorhanden. Zwei Bodenöffnungen, einmal komplett, einmal mit Bohrung Durchmesser 300 mm. Gewicht (ca.): 1020 kg Ihre Sicherheit als Käufer: 1. Die Klimakammer funktioniert einwandfrei. 2. Es müssen keine Komponenten ersetzt werden. 3. Kältemittelfüllung gemäß gesetzlichen Vorschriften. Zustand: gebraucht (sehr gut) (Änderungen und Irrtümer in den technischen Daten und Angaben bleiben vorbehalten!)

Būklė: naudotas, Weiss Type: WK111-600 Weiss Climate Test Chamber, Air-Cooled Specifications for Temperature Tests: Temperature Range: -5°C to +90°C Temporal Temperature Fluctuation: ± 0.1 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 1 K (Equivalent to Temperature Gradient): 1 to 2 K Rate of Temperature Change: Heating: 0.5 K/min Cooling: 0.2 K/min Specifications for Climatic Testing: Temperature Range: +10°C to +90°C Humidity Range: 10% to 98% rH Temporal Temperature Fluctuation: ± 0.1 to ± 0.3 K Spatial Temperature Deviation: ± 0.5 to ± 1 K (Equivalent to Temperature Gradient): 1 to 2 K Lsdpfx Aaoygum Doujaa Temporal Humidity Fluctuation: ± 1 to ± 3 % Test Chamber Dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing Dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Feed-throughs: - 1 feed-through Ø 50 mm installed on the left side - 1 feed-through Ø 125 mm installed on the right side Power Supply: 1/N/PE AC 230V ±10% 50Hz Nominal Power: 2.3 kW Rated Current: 10.0 A Refrigerant: R 404A Capacity: 600 liters Weight: 540 kg For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer prior to sale: 1. Functional test and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Specifications and technical details subject to change and error!) We are happy to answer any further questions you may have by phone.

Būklė: labai geros būklės (naudotas), Techninė būklė: labai gera Išorinė būklė: labai gera Lsdpfx Aet Dlq Hsauoaa Kaina: pagal užklausą Norėdami gauti daugiau informacijos, kreipkitės į Ferdinand Pater.

Gamybos metai: 1996, būklė: geras (naudotas), Compressed air breathing apparatus, respiratory protection - 2-cylinder unit - Positive pressure with: pressure reducer - High-pressure gauge - Demand valve with: integrated warning device - Thread connection: M 45 x 3 Lajdpfx Aasb A H Afsuoa

Būklė: naujas, KAINA: 1900 EUR Spiralinė tešlos maišyklė Talpos tūris (talpa): 60 litrų Spiralinės maišyklės skirtos profesionaliam naudojimui kepyklų ir viešojo maitinimo srityse Jos naudojamos pirminės tešlos paruošimui, tačiau gali būti naudojamos ir kitų gaminių ruošimui, pakeičiant rankinį darbą mechanine sistema Tokiu būdu galima nuolat gaminti didesnius tešlos kiekius Struktūrą sudaro ingredientų dubuo ir maišymo įrankis (spiralė) Įranga turi skaitmeninį valdymo skydelį su ekranu, du nepriklausomus elektros variklius su dviem greičiais ir priešingomis kryptimis, kurie judina indą ir spiralę, bei įmontuotą laikmatį Spiralinės maišyklės specifikacija, vienfazė Dubens talpa: 60 litrų Lasdox U Efbopfx Aauea Elektra: 3kW Įrenginio matmenys: 840x480x1000 mm