Komax Jungties Korpusas pirkti naudotą (3 292)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, 1. Še vedno je vse izdelano zgolj za uporabo z Inarca konektorji/ojačitvami (housings). Za uporabo drugih, ki niso fizično identični Inarca konektorjem, je potrebna predelava (ekipa Komax ima s tem največ izkušenj). 2. Dvojno stiskanje (double crimping) ni možno. Možno je samo enojno stiskanje. 3. Stroj ZETA 633/654 ima 4 preše. Stroj ZETA 633/656 ima 3 preše (vidno na sliki PP iz prvega emaila). 4. Stroj Zeta 654 ima avtomatsko vstavljanje zaščitnih prevlek (coating insertion) na fastone. Možno za vtiče 6,3 in 4,8. 5. Sistem je mogoče prilagoditi različnemu številu polov v konektorjih. Uporabljali smo konektorje z različnim številom polov (2P, 3P, 4P, 7P, 8P), odvisno od potreb kupca garnitur. Na stroju 654 je doziranje konektorjev v stroj avtomatsko preko vibratorja. Na stroju 656 se konektorji ročno vstavljajo v paleto (en se vstavi, druga paleta je v zalogi in vanjo se vodniki avtomatsko vstavljajo). 6. Preše so 'pametne' in avtomatsko prilagodijo višino stiskanja na vodniku. 7. Stroji nimajo brizgalne enote (injection unit). 8. V praksi smo imeli maksimalno dolžino 1.500 mm. Po tehničnih podatkih je lahko še več (glej tehnične podatke spodaj za posamezen stroj). Cgjdsy Nfm Iepfx Af Aet 9. Na stroju Zeta 656 je mogoče vstavljati konektorje na obe strani vodnikov. Na Zeta 654 pa je možno le na eni strani (glej spodnjo sliko).

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, 1. Še vedno je vse izdelano zgolj za uporabo z Inarca konektorji/ojačitvami (housings). Za uporabo drugih, ki niso fizično identični Inarca konektorjem, je potrebna predelava (ekipa Komax ima s tem največ izkušenj). 2. Dvojno stiskanje (double crimping) ni možno. Možno je samo enojno stiskanje. 3. Stroj ZETA 633/654 ima 4 preše. Stroj ZETA 633/656 ima 3 preše (vidno na sliki PP iz prvega emaila). 4. Stroj Zeta 654 ima avtomatsko vstavljanje zaščitnih prevlek (coating insertion) na fastone. Možno za vtiče 6,3 in 4,8. 5. Sistem je mogoče prilagoditi različnemu številu polov v konektorjih. Uporabljali smo konektorje z različnim številom polov (2P, 3P, 4P, 7P, 8P), odvisno od potreb kupca garnitur. Na stroju 654 je doziranje konektorjev v stroj avtomatsko preko vibratorja. Na stroju 656 se konektorji ročno vstavljajo v paleto (en se vstavi, druga paleta je v zalogi in vanjo se vodniki avtomatsko vstavljajo). 6. Preše so 'pametne' in avtomatsko prilagodijo višino stiskanja na vodniku. 7. Stroji nimajo brizgalne enote (injection unit). 8. V praksi smo imeli maksimalno dolžino 1.500 mm. Po tehničnih podatkih je lahko še več (glej tehnične podatke spodaj za posamezen stroj). Codpfxey I Dr Tj Af Ajgt 9. Na stroju Zeta 656 je mogoče vstavljati konektorje na obe strani vodnikov. Na Zeta 654 pa je možno le na eni strani (glej spodnjo sliko).

Būklė: naudotas, Centrifugal pump, water pump, stainless steel pump, food-grade pump, peripheral impeller pump, coupling housing, magnetic coupling centrifugal pump, motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump adapter Cedpjt U Tqpjfx Af Asgt - Manufacturer: KTR, pump adapter coupling housing - Type: PL 550/1/ - Dimensions: see photo for measurements - Quantity: 2 housings available - Price: per piece - Dimensions: Ø 550 x 270 mm - Weight: 12 kg/piece.

Būklė: naudotas, centrifugal pump, water pump, stainless steel pump, food-grade pump, peripheral impeller pump, coupling housing, magnetic drive centrifugal pump, motor centering flange, motor flange, pump flange, motor centering bell housing, coupling bell, pump support - Manufacturer: Sondermann, coupling housing for magnetic drive centrifugal pump - Type: MA-EFSK-24-200-1.1/35 - Dimensions: see photo for details - Measurements: 230/215/H230 mm Csdpot Rmaijfx Af Asgt - Weight: 8 kg

Būklė: naudotas, centrifugal pump, water pump, stainless steel pump, food-grade pump, peripheral impeller pump, coupling housing, magnetic coupling centrifugal pump, motor centering flange, motor flange, pump flange, motor centering bell housing, bell housing, pump mounting bracket Cgjdpfx Ast U Tq Asf Aot - Manufacturer: KTR, pump mounting bracket / coupling housing - Type: PL 250/6/ - Dimensions: see photo for details - Measurements: Ø 250 x 135 mm - Weight: 1.5 kg

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Presavimo (crimpavimo) jėgos valdiklis. Cgsdjy Ivdbspfx Af Ast

Būklė: geras (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, Gamma 333 visiškai veikiantis. Cgsdpfoy Ah R Nsx Af Ast

Gamybos metai: 2001, būklė: geras (naudotas),

Būklė: labai geros būklės (naudotas), ///// PRICE SHOWN IS FOR 1 PIECE ///// Csdpfxsyz A U Hj Af Aogt Manufacturer: ALGRA Type / Designations: D3A030012/0 21-451-003 D3A030011/6-3 23-1151-012 I am offering ALGRA drive gearboxes used in metalworking machines. These components are used for power transmission and feed control, most commonly applied in: - Conventional milling machines - Machining centers - Industrial machines as drive modules Robust, heavy-duty construction – typical components for continuous industrial operation. ⚙️ Technical Condition Condition: used Show normal signs of use Mechanically complete Dials and mechanisms are functional Possible signs of storage 📦 Included ALGRA gearbox (exactly as shown in the photos) 📏 Applications - Axis feed drive (X/Y/Z) - Gearbox systems in machine tools - Spare parts for milling machines and industrial equipment - Maintenance / machine service ℹ️ Additional Information - Markings stamped on the housings (visible in the photos) - Control plates “QS-IN PRÜFUNG” - Oil-filled construction (sealed gearbox) - Sale possible individually 🚚 Shipping Shipping by courier or on a pallet Local pickup possible

Būklė: naudotas, Spąstų filtro korpusas alaus arba kitų skysčių galutiniam filtravimui. Galimi įvairūs dydžiai, našumai ir filtravimo tikslumai. Gamintojai: Sartorius/Seitz/Pall/Filtrox/Eaton. Nurodykite savo pritaikymą (terpė, srauto greitis, atskyrimo laipsnis) – pasiūlysime optimalų sprendimą. Cgsdpfx Ajw Uu U Rof Ast Mašina (priedas): Galutinis filtravimas Medžiaga: nerūdijantis plienas Padėtis: pastatoma atskirai Bazinis dizainas: cilindrinis korpusas ant vamzdinių kojų su kupoliniais galais Įranga: manometras, korpusas su prispaudimo varžtais arba spaustuku

Būklė: naudotas, Gamybos metai: 2003, Naudota mašina Pagaminimo metai: 2003 Įranga ir techniniai duomenys: lanksti, pneumatinė presas su labai trumpu perstatymo laiku presą sudaro tvirtas presavimo rėmas, lengvai judantis presavimo vežimėlis ir horizontalios bei vertikalios presavimo žnyplės Csdpfx Aoy Ih Ryof Ajgt visi valdymo elementai lengvai pasiekiami MPH 100 presavimo metu pasiekia vežimėlio užspaudimą – panašiai kaip su spaustuvu su 3 vertikaliomis presavimo žnyplėmis su 2 horizontaliomis presavimo žnyplėmis korpuso ilgis: 380 – 2500 mm korpuso gylis maks. 600 mm korpuso aukštis: 350 – 1200 mm presavimo jėga: 3,6 kN / presavimo žnyplė Darbo aukštis: 600 mm Svoris: 1,1 t Darbinis slėgis: 6 bar Prieinamumas: greitai Sandėliavimo vieta: 63934 Röllbach

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, mašinos/transporto priemonės numeris: 71163,

Būklė: geras (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, Iš veiklos nutraukimo: Stegherr KSF-Mini Pagaminimo metai: 1993 380 voltų Variklio stabdis Codpfx Afsy Iur Rs Aegt Pneumatinis medžiagos prispaudimas

Būklė: geras (naudotas), Schmedt PraForm 21-50 joint-setting press Book press with integrated joint forming. Manufacturer: Schmedt, Germany. The machine is in very good condition and ready for operation. Technical specifications: Maximum format: 450 x 520 x 100 mm Weight: 264 kg Power supply: 230V + compressed air. Csdoyvp Ivjpfx Af Asgt

Būklė: naujas, Gamybos metai: 2025, Naujas įrenginys Pagaminimo metai: 2025 Kompaktiškas ir lankstus net ir mažiausioje erdvėje. Tik 2,13 m ilgyje ruošiniai čia įgauna galutinę apdirbimo kokybę. Įrenginyje sumontuotas 1,1 kW didelio dažnio variklio klijavimo mazgas su deimantu dengtų spiraliniu frezu, teflonu dengtas klijavimo mazgas, priešpjovimo modulis ir daugiafunkcis HF frezavimo modulis. 2 laisvos vietos apdailos agregatams, pvz., plokštuminiam grandikliui ir poliravimo moduliui. Paprastas valdymas per 3,5 colių spalvotą lietimui jautrų ekraną. Techniniai duomenys Staklių ilgis: 2122 mm Ruošinio storis: 10–45 mm Ruošinio plotis – min. apie 120 mm Briaunos storis: 0,4–2,0 mm Briaunos aukštis max. = ruošinio aukštis + 4 mm (2+2) Elektra: 400 V Bendras galingumas: 3,6 kW Padavimo greitis: 6,5 m/min Pneumatinis prisijungimas: 6 bar Cgsdpfx Aoy Eizzof Aet Grynasis svoris: apie 490 kg Pasirinkimai: Plokštuminiam grandikliui skirtas modulis Deimantiniai įrankiai aukštis = 45 mm Vieta: Flörsheim Prieinamumas: trumpai laukiant

Būklė: labai geros būklės (naudotas), Gamybos metai: 1978, Technische Daten: Leistung: 110 m²/h Maximale Maschenbreite: 2.000 mm Maschenweite: 30–100 mm Cgodpfx Aek D T Nnef Ajt Motorleistung: 4 kW Die Maschine ist für die Herstellung von Graszäunen eingestellt. Ausgezeichneter Zustand

Būklė: naudotas, Number of milling spindles: 4 units Stop: yes / no Tooling: yes Stegherr KSF 2/4 – The modern, practice-oriented machine concept for efficient cross-bar production. Many years of expertise and a proven, field-tested machine, with over 1,000 units in service, guarantee you precision at an optimal price-performance ratio. Special attention has been paid to ease of operation and machine flexibility. Expansion stage KSF 2/4: Milling units A1, A2, A3 as with KSF 2. + Milling unit A4, allowing machining of the counterpart without turning, ensuring a completely tear-free visible surface. Digital stop (sliding carriage, secure and rapid readout to 0.1 mm precision). Foot switch. Includes tooling as shown in the photos, plus 2 additional profile cutters (see photos). Further accessories as pictured. Compressed air p = 6 bar. The following work has been carried out on the machine: - Maintenance unit replaced - Pneumatic hoses replaced - Plexiglass hood replaced and gas strut for hood open/close replaced - Function test conducted Csdpoy Dvm Isfx Af Aegt (technical data provided by manufacturer – subject to change without notice!)

Gamybos metai: 1997, būklė: visiškai atnaujintas (naudotas), bendras svoris: 300 kg, bendras ilgis: 1 270 mm, bendras plotis: 550 mm, bendras aukštis: 570 mm, 4 units spiral volute pumps in process design 1 unit fully overhauled, pump and motor bearings replaced. Mechanical seal refurbished by specialist company. All seals replaced. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearing Impeller side: 1x NU411 Drive side: 2x 7311 Drive side lubrication: oil Lubricant monitoring: Oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction branch nominal size: DN 80 Discharge branch nominal size: DN 40 Nominal pressure (suction): PN 10 Nominal pressure (discharge): PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Base plate: Grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Rated power: P2 7.50 kW Thermal class: F Degree of protection: IP55 Power factor (cos phi): 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coking plants Cgodoiuznuepfx Af Ajt - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and conveying - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/clarification plants - Offshore and marine technology

Būklė: naujas, Number of milling spindles: 2 pcs. Stop 1: Yes Tooling: Yes Crossbar Milling Machine STEGHERR TYPE KSF-mini includes standard fence with 2 sliding stops, without tools With the KSF-mini, all practically occurring crossbar joints can be produced quickly and with perfect fit. Precision is achieved by machining the workpiece on three sides in a single clamping. Tool drive is provided by two three-phase motors; workpieces are clamped pneumatically. The profile cutter is designed for the web width. The saw blades used for notching are adjustable to the cutter dimensions via spacing rings. The swivelling device is backlash-free. The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. Voltage Europe: 400V (+/-10%)/3Ph/50Hz , USA: 440V (+/-10%)/3Ph/60Hz Other voltages available on request. Operating manual in German or English. Base table frame: €1,070.00 Foot switch: €900.00 Setting optics: €130.00 Profile cutter in HM-Wepla version, available diameters: Ø5, 7, 9, 11, 13 mm. Price per piece: €650.00 1 set of replacement reversible knives for profile cutter (=10 pieces): €190.00 HM saw blade, price per piece: €170.00 (For a web of e.g. 10 mm, 3 saw blades are required) Machine adjustment for customer-supplied tools, price per individual tool: €700.00 Packaging in a crate (suitable for land transportation): €650.00 Codpfxsyrtzqs Af Asgt Packaging on pallet shrink-wrapped (within Europe only, not for air freight): €340.00 Ex works price, unpacked, uninsured. For deliveries within Germany, plus VAT valid at the time of delivery. (All technical data according to manufacturer, without obligation!)

Būklė: geras (naudotas), Tempimo jungtis, priekabos jungtis, kablio jungtis, automatinė kablio jungtis - Gamintojas: Rockinger, automatinė priekabos jungtis - Tipas: Tipas 244D, B versija - Tempimo masė: 5x4t = 20t - Kiekis: 2 jungtys prieinamos - Kaina: už vnt. Cgsdpfx Afjw Slcyj Ast - Transportavimo matmenys: 160/150/H190 mm - Svoris: 5,6 kg/vnt.

Būklė: geras (naudotas), Kardaninis velenas, šarnyrinis velenas, kryžminis šarnyras, flanšinis kryžminis šarnyras, pavaros velenas, kardaninis šarnyrinis velenas - Kardaninis velenas: su kryžminiu šarnyru - Tipas: ilgis 250 mm - Flanšo Ø 75 mm Cgedpfxjyzfzve Af Aot - Tvirtinimo skylės (ratlankio skersmuo): Ø 62 x 6 mm - Kiekis: 2 kardaniniai velenai - Kaina: už vienetą - Matmenys: Ø 75 x 250 mm - Svoris: 2,3 kg/vnt.

Būklė: geras (naudotas), Kardaninis velenas, kardaninis velenas, kryžminis šarnyras, flanšinis kryžminis šarnyras, pavaros velenas, kardano šarnyrinis velenas -Kardaninis velenas: su kryžminiu šarnyru -Tipas: ilgis 240 mm -Flanšas: Ø 75 mm -Tvirtinimo skylės: Ø 62 x 6 mm Cgjdpfx Aoyzfxhsf Ajt -Išmatavimai: 240/75/H75 mm -Svoris: 2,2 kg

Būklė: geras (naudotas), Jungiamoji velėna, kardaninė velėna, kryžminė jungtis, flanšinė kryžminė jungtis, pavaros velėna, kardaninė jungiamoji velėna -Kardaninė velėna: su kryžmine jungtimi -Tipas: ilgis 290 mm -Flanšas: Ø 100 mm -Tvirtinimo skersmuo: Ø 83 x 9 mm -Matmenys: 290/100/H100 mm -Svoris: 6,1 kg Csdpfx Afoyzfu Ao Aogt

Gamybos metai: 2015, veikimo valandos: 13 275 h, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, rotoriaus skersmuo: 800 mm, We are offering this used ZENO ZTLL 1600x1800 shredder for hollow bodies, pallets, etc., year of manufacture 2015. This plant is ideally suited for processing hollow containers, PE wheelie bins, PP + PE crates, PP KLT’s, and PO pallets. Waste containers with a volume of 1.1 m³ can be loaded and shredded as a single piece. The throughput for these fractions is 1,500 kg per hour. Other hard plastics such as ABS, PS, PMMA, and ABS-chrome can also be processed efficiently. Here, the throughput is 2,000 kg per hour. Type: ZTLL 1600x1800 Machine no.: 15A-6191 Year of manufacture: 2015 Weight: 12,000 kg Main motor output: 90 kW Main motor current: 161 A Main motor voltage: 400/690 V Main motor speed: 1,450 rpm The main motor is equipped with forced ventilation. The motor was replaced with a new one in November 2023. Rotor speed: 80–140 rpm The rotor is equipped with 145 cutting crowns 40 mm x 40 mm. The original rotor has been replaced. Hydraulic motor output: 5.5/1.1 kW Hydraulic motor current: 11/2.6 A Hydraulic motor voltage: 400/690 V Hydraulic motor speed: 1,500 rpm The plant can be operated immediately after installation. The plant floor is uneven. The system is stored in 34431 Marsberg-Westheim, near the A44. We replaced the system to further increase the throughput of our operations. Csdpey Efgmofx Af Ajgt If you have any questions or require further information, please send us a message or give us a call.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, GreCon Turbo-S 1000 Finger Jointing Line with Micro-Toothing Csdsyu Up Ispfx Af Ajgt Manufacturer: GreCon Model: Turbo-S 1000 Year of manufacture: 2007 Machine Description: For sale is a GreCon Turbo-S 1000 finger jointing line with micro-toothing, year 2007, designed for the efficient production of solid wood elements joined by finger jointing. The Turbo-S 1000 model is a renowned GreCon solution known for its high productivity, precise finger joint profiling, and consistently high joint quality. This machine is suitable for the production of structural timber, furniture components, joinery parts, and solid wood elements for further processing. According to the configuration, tooling, and installed equipment, the line can process both softwood and hardwood. Technical data: - Infeed length of workpiece: approx. 150 – 1000 mm - Working width: approx. 40 – 205 mm - Optional width: up to approx. 225 mm - Working thickness: approx. 20 – 80 mm - Number of press channels: 2 - Feed speed adjustable - Material: softwood and hardwood - Machine type: high-capacity finger jointing line Features / advantages: - High production capacity - Very good joint quality - Proven and reliable GreCon technology - Suitable for continuous operation - Compact, robust construction - Ideal solution for joinery, furniture production and structural timber Condition: Very good Note: Technical data may vary depending on the exact machine configuration, tooling, press length and optional equipment. Manufacturer’s information for the Turbo-S 1000 series also indicates high production capacity, depending on finger joint orientation, wood dimensions, and press configuration.