Kk Kletzer Exzenterpresse Kk 150 To Mit Sps Siemens S7 -12200 pirkti naudotą (34 913)

Būklė: naujas, Pressing force: 150 t Ram adjustment: (automatic adjustment) 40 mm Stroke length (max.): 10–125 mm Total power requirement: 15 kW Approx. weight: 9500 kg Dimensions (LxWxH): 1800 x 1500 x 2600 mm Strokes per minute: 50–90 Machine and equipment conform to CE regulations Light sensors: SICK or PILZ PLC control: Siemens S7 - 1200* Stroke adjustment: directly via operator panel Balancing system: integrated Speed adjustment: via Mitsubishi frequency inverter Machine frame: full steel construction Dcsdpfxetqwtdo Ag Iol Guidance system: internal and external eccentric guides Crankshaft: made of hardened 4140 steel Clutch & brake: pneumatic combination Safety valve: two-way system Safety control (Safety PLC): SICK or PILZ Operation: two-hand control and foot pedal operation possible Lubrication: automatic lubrication system Overload protection: hydraulic Protective device: safety enclosure for the working area External connections: 8-pin inputs & outputs on the PLC (for signal exchange & extensions) Vibration damping: rubber mats under machine feet (1 pair – 4-fold) Voltage/Frequency: 400 V / 50 Hz Fuse: 32 A required Standards: Machine and equipment in compliance with CE guidelines Control unit: 19-inch Siemens touchscreen Technical data: - Operation: inching mode / single stroke / continuous stroke - Pressing force: 150 t - Table plate: 750 x 1000 mm (fixed table plate) Stroke length: 10–125 mm, automatic stroke adjustment via PLC - Ram plate: 500 x 800 mm (Ø 55 mm pin mount & T-slots as per customer specification) - Strokes per minute: 50–90 1/min - Motor: 15 kW (1400 rpm) - Throat depth: 325 mm - Installation height: 475 mm to 295 mm - Pin hole in ram: 50 mm - Length: 1800 mm - Width: 1500 mm - Height: 2600 mm - Approx. weight: 9500 kg - Ram adjustment: 40 mm (automatic adjustment)

Būklė: naujas, Pressure: 125 t Ram Adjustment: (automatic adjustment) 40 mm Stroke Length (max.): 10–125 mm Total Power Requirement: 11 kW Approx. Weight: 8,000 kg Dimensions (L x W x H): 1,800 x 1,500 x 2,600 mm Technical Data Dcjdpfektm N Dox Ag Isl Press Force: 125 t Strokes per Minute: 50 spm Table Size: 900 × 700 mm Ram Size: 700 × 500 mm with pin receptacle Stroke Adjustment: 20–125 mm Ram Adjustment: 40 mm Installation Height: 475 mm Accessories & Equipment Control System: Siemens S7-1200 PLC Operating Screen: 9” Siemens touch panel Precise stroke length adjustment directly via display Setting min. & max. stroke rate Automatic central lubrication Safety PLC: PILZ or Siemens Dual-channel safety architecture in the control cabinet Light curtains: SICK, PILZ, or LEUZE (Category 4, CE-compliant) 2 rupture discs – included Lower support plate for secure transportation Anti-reach protection – for maximum occupational safety Pneumatic clutch & brake combination The machine impresses with a highly extensive standard equipment package at the highest technical level. Thanks to the use of branded components such as Siemens, PILZ, and SICK, maximum reliability and durability are ensured.

Būklė: naujas, Pressure: 160 Bending length: 3200 mm Frame width: 2655 mm Installation height: 400 mm Motor: 11 kW Max. ram stroke: 200 mm Repeatability: 0.015 mm Positioning accuracy: 0.10 mm CNC press brake KK Industries 160x3200, 4 axes Y1-Y2-Y-X-R with CNC crowning Standard equipment: - Robust design for high stability and precision. - CNC axes: Y1, Y2, X, and R axes for precise control and accurate bending operations. - CNC-controlled motorized crowning device for precise adjustment. - ZY 68 CNC controller from the manufacturer (similar to Delem) for user-friendly operation and high flexibility. - Back gauge with linear guides and ballscrew, equipped with 4 stop fingers for precise material positioning. - 2 sheet support arms for ergonomic material handling. - Laser safety device on the upper beam to ensure operator safety during operation. - Quick clamping system for the upper tool to enable fast and easy tool changes. - Upper tool system: Promecam/Amada, segmented and gooseneck design for maximum flexibility. - Multi V-die system: Compatible with both Promecam and Amada systems. - CE safety equipment to comply with all relevant safety regulations. Dodpjv S Npyjfx Ag Iocl Delem T53 control (surcharge €5,000)

Būklė: naujas, Pressure: 63Bending length: 2500 mmColumn gap: 1980 mmMotor: 11 kWRam stroke - max.: 150 mmOpening width: 400 mmCNC press brake KK Industries 63x2500, 4 axes Y1-Y2-Y-X-R with CNC crowning Technical Specifications: Press Force: 63 t Bending Length: 2500 mm Distance between columns: 1980 mm Throat Depth: 300 mm Ram Stroke Length: 150 mm Maximum Opening: 400 mm Ram Down Speed: 180 mm/s Ram Return Speed: 170 mm/s Ram Working Speed: 14 mm/s Main Motor Power: 11 kW CNC Control: ZY68 Number of Control Axes: 4+1 Oil Tank Capacity: 150 L Backgauge (X-Axis): X-Axis Travel: 600 mm X-Axis Speed: 200 mm/s Positioning Accuracy: ±0.10 mm Repeatability: ±0.015 mm Motor Power: 0.85 kW R-Axis: R-Axis Travel: 150 mm R-Axis Speed: 100 mm/s Positioning Accuracy: ±0.10 mm Dcedpev Trgqofx Ag Iol Repeatability: ±0.015 mm Dimensions and Weight: Length: 2750 mm Width: 1350 mm Height: 2320 mm Weight: 4000 kg

Būklė: naujas, Press force: 40 tons Bending length: 1600 mm Distance between uprights: 1980 mm Motor: 4 kW Ram stroke - max.: 150 mm Opening height: 370 mm CNC press brake 40x1600 with 4 axes (Y1-Y2-X-R) and CNC crowning Technical specifications: Nominal pressing force: 63 kN Bending length: 1600 mm Distance between columns: 1980 mm Throat depth: 250 mm Ram stroke: 150 mm Maximum opening: 370 mm Ram descent speed: 180 mm/s Ram return speed: 150 mm/s Working speed: 15 mm/s Dcsdpfx Agewacq Ej Iel Main motor power: 4 kW CNC system: ZY68 Number of controlled axes: 4+1 Oil tank capacity: 90 L Back gauge (X-axis): X-axis travel: 600 mm X-axis speed: 200 mm/s Positioning accuracy: ±0.10 mm Repeatability: ±0.015 mm Motor power: 0.85 kW R-axis: R-axis travel: 150 mm R-axis speed: 100 mm/s Positioning accuracy: ±0.10 mm Repeatability: ±0.015 mm Dimensions and weight: Length: 1850 mm Width: 1250 mm Height: 2180 mm Weight: 2700 kg Additional motor power: 0.85 kW

Būklė: naujas, Sheet length: 3120 mm Sheet thickness: 6.0 mm Total power requirement: 11 kW Weight approx.: 6500 kg Dimensions (LxWxH): 3850 x 2750 x 1700 mm Our powerful brand KK Kletzer NC GUILLOTINE SHEAR (Swing Beam Design) Model BS has everything you need for cutting. NC guided guillotine shear KKI Technological advantages: - Fast and precise cuts Dodpjd Eqrmefx Ag Iecl - Stable, durable frame construction - Easy operation - Low maintenance costs - High safety standard - Use of components from renowned manufacturers - Low unit costs Technical data: Sheet thickness: 6 mm Cut length: 3,120 mm Cutting angle: 1.39° Number of hold-downs: 15 Backgauge: 1,000 mm CNC-controlled Motor power: 11 kW Cutting speed: 18 cuts/min Throat depth: 150 mm Oil tank: 200 liters Length: 3,060 mm Width: 2,050 / 2,745 mm Height: 1,700 mm Weight: 6,500 kg • Stable swing beam design - Blade gap adjustment via the control - Backgauge - Blade gap - Cut length • Ball screw spindles for the backgauge • Balls in the table • Side gauge 1,500 mm • 2 support arms, 1,000 mm each • Cutting line illumination • 1,000 mm swing-up finger guard Optional pneumatic sheet support, EURO 5,500 We have many references!

Būklė: naujas, Bandsaw Frame: Swivel Frame Saw Band Dimensions: 3160 x 27 x 1.1 mm Band Speed: 20–100 m/min Dcodporzx Dtjfx Ag Ijl Cutting Range Round: 270 mm Cutting Range Square: 270 mm Cutting Range Rectangular: 350 x 220 mm Dimensions (LxWxH): 2230 x 770 x 1450 mm Working Height: 910 mm Coolant Pump Motor: 0.12 kW Weight approx.: 525 kg Cutting Range 60°: round 150 mm, square 100 mm, rectangular 150 x 100 mm Cutting Range 45°: round 240 mm, square 170 mm, rectangular 270 x 210 mm Cutting Range -45°: round 210 mm, square 180 mm, rectangular 270 x 210 mm Motor: 1.5 kW Bandsaw KK Kletzer 270DGH with Hydraulic Double-Miter Head. Heavy-duty steel construction machine. Standard Equipment: - M42 bimetal saw blade - Variable speed - Inverter control unit - Coolant system - Automatic blade breakage shut-off - Hydraulic vise - Hydraulic bow - Saw blade tensioning device - Pendant control - Two-way miter head - Heavy-duty gearbox

Būklė: geras (naudotas), Gamybos metai: 2020, PLC valdymas, centrinis modulis, darbinė atmintis, CPU, centrinis blokas, centrinis įrenginys -Gamintojas: Siemens, SIMATIC S7-1500 CPU 1515-2 PN -Tipas: 6ES7 515-2FM02-0AB0 -CPU: 1515-2 PN -Kiekis: 3 vnt. modulių -Kaina: už vienetą Dcedpfx Agexxvblo Iol -Matmenys: 125/70/H155 mm -Svoris: 0,5 kg/vnt.

Būklė: naudotas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6AV2 124-0QC13-0AX0, įėjimo įtampa: 24 V, įvesties srovės tipas: Nuolatinė srovė, TP1500 Comfort Outdoor HMI panelis 6AV2 124-0QC13-0AX0 Dcsdpfxszicqbs Ag Isl C-K3KJ7468 AC-64-17-01-2E-3C Atex, 2 zona 1280 x 800 pikselių Ekrane yra įtrūkimas, visos funkcijos vis dar veikia puikiai – žiūrėkite vaizdo įrašą.

Būklė: naujas, Frame saw: Swivel frame Saw band dimensions: 3160 x 27 x 1.1 mm Band speed: 20-100 m/min Cutting capacity round: 270 mm Cutting capacity square: 270 mm Cutting capacity rectangular: 350 x 220 mm Dimensions (LxWxH): 2230 x 770 x 1450 mm Working height: 910 mm Weight approx.: 525 kg Cutting capacity at 60°: round 150 mm, square 100 mm, rectangular 150 x 100 mm Cutting capacity at 45°: round 240 mm, square 170 mm, rectangular 270 x 210 mm Dcsdjrzx Dpspfx Ag Iol Cutting capacity at -45°: round 210 mm, square 180 mm, rectangular 270 x 210 mm Main motor: 1.5 kW Coolant pump motor: 0.12 kW Band saw KK Kletzer 270DG gravity feed, double miter head, heavy-duty machine made of structural steel Standard equipment: - M42 bimetal saw blade - Variable speed - Inverter control system - Coolant system - Automatic blade breakage shut-off - Manual vice - Gravity feed bow - Blade tensioning device - Pendant control - Double miter head (two directions) - Heavy-duty gearbox

Būklė: naujas, Sheet length: 3120 mm Sheet thickness: 6 mm Total power requirement: 11 kW Weight approx.: 6500 kg Dimensions (LxWxH): 3840x2050x1700 mm Our powerful brand KK Kletzer NC GUILLOTINE SHEAR, swing-beam type Model BS offers everything you need for cutting. Technological advantages: - Fast and precise cutting - Rigid, durable frame construction - Easy operation - Low maintenance costs - High safety standard - Use of components from renowned manufacturers - Low unit costs Technical Data: Sheet thickness: 10 mm Cutting length: 3,120 mm Dodpfefrz H Dex Ag Iscl Cutting angle: 2° Number of hold-downs: 15 Backgauge: 1,000 mm (CNC controlled) Motor power: 22 kW Cutting speed: 12 cuts/min Throat depth: 150 mm Oil tank: 200 liters Length: 3850 mm Width: 2175 / 3060 mm Height: 1850 mm Weight: 12,250 kg - Robust swing-beam construction - Blade gap adjustment via the control system - Backgauge - Blade gap - Cutting length - Ball screw spindles for backgauge - Balls in table - Side gauge 1,500 mm - 2 support arms, each 1,000 mm - Cutting line illumination - Foldable 1,000 mm finger guard Optional pneumatic sheet support, EUR 6,320 We have numerous references!

Būklė: naujas, Saw frame: Swivel frame Dcsdpfx Agjrzx Dlo Iol Saw band dimensions: 2730 x 27 x 0.9 mm Band speed: 35/70 m/min Cutting capacity round: 230 mm Cutting capacity square: 230 mm Cutting capacity rectangular: 320 x 130 mm Dimensions (LxWxH): 1350 x 770 x 1300 mm Working height: 760 mm Coolant pump motor: 0.12 kW Weight approx.: 525 kg Cutting capacity 45°: round 210 mm, square 180 mm, rectangular 230 x 160 mm Cutting capacity 60°: round 120 mm, square 100 mm, rectangular 120 x 100 mm Cutting capacity -45°: round 180 mm, square 150 mm, rectangular 230 x 100 mm Motor: 1.3 kW KK Kletzer 230DG Hydraulic Double Mitre Head Bandsaw. Heavy-duty construction from structural steel. Standard accessories: - M42 bimetal saw blade - Variable speed - Inverter control unit - Coolant system - Automatic blade breakage shut-off system - Manual vice - Hydraulic bow - Blade tensioning device - Pendant control - Double mitre head (2-way mitre cutting) - Heavy-duty gearbox

Būklė: naujas, Gamybos metai: 2020, Pressure: 135 Bending length: 3050 mm Frame width: 2550 mm Installation height: 380 mm Stroke length (max.): 180 mm Throat depth: 250 mm Dimensions (LxWxH): 3760 x 2150 x 2450 mm Weight approx.: 6500 kg Motor power: 11 kW Standard equipment: KK-Industries GmbH has participated in production and is now manufacturing press brakes and guillotine shears according to its own specifications. We have assembled a high-quality model for Europe. The CNC press brake KK Kletzer Europa Compact, made in Bursa, Turkey Model: KK Kletzer Europa Compact The robust entry-level press brake KK Kletzer Europa Compact is characterized by its high precision, accuracy, and versatile application possibilities. We focus on quality, which is also reflected in the controller. As a standard controller, we use high-quality control systems from Cybelec with extremely simple programming. Furthermore, the KK Kletzer Europa Compact press brake is equipped with Y1, Y2, and X CNC axes, and crowning through the handwheel option CNC EURO 2,000. We also make no compromises on the upper tool and die, fitting the KK Kletzer Europa Compact CNC press brake with quality tooling from EUROSTAMP Italy or Rolleri Italy. Of course, every machine is only as good as its service. For this reason, we focus on highly qualified employees with extensive experience in CNC sheet metal processing. CNC axes: Y1, Y2, X Controller: Cybelec CybTouch 12 Dcjdpfx Asfnlqdog Ijl Cybelec CybTouch 12 Controller Simple operation, more efficient bending, and powerful features characterize the CybTouch 12 PS The Cybelec CybTouch™ 8 PS is specifically designed for synchronized press brakes. As part of the Cybelec CybTouch series, it features an intuitive touchscreen with vivid colors and an extremely high degree of function integration. More efficient bending - Various automatic bend sequence calculations. - Bend programs and products can be stored. - Management of bend angle, pressure, and crowning. - Simple manual operation. Powerful - Controls up to 4 axes - Optional 2D graphical profile creation with manual bend sequence - Calculation of bend allowance - Calculation for pressure and crowning - Modular tooling for every part or bend - Angle and backgauge correction Simple operation - Large, bright, and high-contrast full touchscreen - Clear pages, simple display, large buttons - Simple, user-friendly operation - Complete programming for efficient mass production with multiple bends - Simple single-part production via the Easy-Bend page - Online help and interactive warning hints - Convenient wireless data backup and software updates via PC or laptop - USB storage interface for data transfer/backup - Wide range of languages Backgauge with double linear guide and ball screw Centrally adjustable crowning system 2 front support arms adjustable on linear guides Laser safety device on the upper beam CE safety equipment Options: recommendations from KK

Būklė: naujas, Stroke length (max.): max. 400 mm Table height: Floor to top edge of table 850 mm Installation height: 600 mm Speeds: Advance 120 mm, Pressing 13 – 4 mm, Return 170 mm/sec Pump capacity: 65 L/min (REXROTH – axial piston pump) Motor: 15 kW – 1500 rpm Dimensions (LxWxH): 2,100 x 2,400 x 4,300 mm Weight approx.: 11,000 kg Capacity: 1,500 kN (150 tons at 245 BAR) Operation Mode: Selection via key switch - Manual / setup mode via two-hand control without light sensor safety on the front (rear side always active) - Automatic mode via two-hand operation at full speed (with active light sensor safety) Main cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs. Ø 70 x 50 mm Motor: 15 kW – 1500 rpm (IE-3) Pump: 45 cc, 65 L/min, REXROTH – axial piston pump Speed: Advance 120 mm – Pressing 13–4 mm – Return 170 mm/sec Dodpompfwdsfx Ag Ijcl Clear width: 1300 mm Table plate: 1200 x 800 x 90 mm, with T-slots Ram plate: 1200 x 800 x 600 mm, with T-slots & reinforcement ribs Installation height: 600 mm (max. distance between table & ram plate) Stroke length: max. 400 mm Table height: 850 mm (floor to top edge of table) ----- Hydraulics: (Hydraulic accessories located on top of press) Control block & valves (REXROTH proportional valves) Pre-fill valve (NG.125) 8-fold guide system Hydraulic ram safety device Mechanical ram safety at upper dead center Pressure adjustment via PLC Speed adjustment via PLC Pressure hold valve for 600 sec Air cooler Automatic lubrication for guideways Auxiliary motor Auxiliary pump Control system: Main control cabinet (mounted lateral to the press frame) Swiveling operator panel SIEMENS S7 – 1200 KTP 9” SIEMENS touchscreen (language selection DE / ENG) Safety PLC (SICK) Light curtain for front & rear of work area (SICK 750 + 150 mm.) Soft starter Movable two-hand operation SECOMEA Ethernet connection Linear measuring system for stroke length adjustment (450 mm – NOVOTECHNIK 16BIT) Work Area Lighting (2x IP-66) - 8 free PLC I/O ports for external connections ----- - Safety guard around hydraulics - Side access ladder ----- Documentation: Operating manual GERMAN (1 copy paper & 1 copy USB) Hydraulic & electrical diagrams Parts lists CE certificate Standard: EN 16092/1/3 ----- Overall dimensions: approx. 2,400 x 2,100 x 4,100 mm Total weight: approx. 11,000 kg Painting: Frame RAL 7035 light grey

Būklė: naujas, Sheet length: 4120 mm Sheet thickness: 13.0 mm Total power requirement: 30 kW Approximate weight: 16,750 kg Dimensions (LxWxH): 4930 x 3160 x 2100 mm Our strong brand KK Kletzer NC GUILLOTINE SHEAR with swing-beam design Model BS is equipped with everything you need for cutting operations. Technological advantages: - Fast and precise cuts - Robust, durable frame construction - Easy operation - Low maintenance costs - High safety standards - Use of components from renowned manufacturers - Low unit costs Technical data: Sheet thickness: 13 mm Cutting length: 4,160 mm Cutting angle: 2° Number of hold-downs: 19 Backgauge: 1,000 mm via CNC Motor power: 30 kW Cutting speed: 8 (cuts/min) Throat depth: 150 mm Oil tank: 400 liters Length: 4,930 mm Width: 2,345/3,160 mm Dcjdpfx Agjd Eqrde Ijl Height: 2,100 mm Weight: 16,750 kg • Robust swing-beam design • Blade gap adjustment via the control o Backgauge - Blade gap - Cutting length • Ball-screw drives for the backgauge • Balls in the table o Side gauge 1,500 mm • 2 support arms, each 1,000 mm • Cutting line illumination • Finger guard foldable to 1,000 mm Optional pneumatic plate support, EUR 8,420 We have numerous references available!

Būklė: naujas, Sheet length: 3120 mm Sheet thickness: 10.0 mm Total power requirement: 22 kW Approximate weight: 12,250 kg Dimensions (LxWxH): 3850 x 3060 x 1850 mm Our powerful brand KK Kletzer NC GUILLOTINE SHEAR, Swing Beam version, Model BS, is equipped with everything you need for cutting. Dodpfjd Eqrljx Ag Iocl Technological Advantages - Fast and precise cuts - Stable, durable frame structure - Easy operation - Low maintenance costs - High safety standard - Use of components from renowned manufacturers - Low unit costs Technical Data: Sheet thickness: 10 mm Cutting length: 3,120 mm Cutting angle: 2° Number of hold-downs: 15 Backgauge: 1,000 mm (CNC-controlled) Motor power: 22 kW Cutting speed: 12 cuts/min Throat depth: 150 mm Oil tank capacity: 200 liters Length: 3,850 mm Width: 2,175 / 3,060 mm Height: 1,850 mm Weight: 12,250 kg • Sturdy swing beam design • Blade gap adjustment via the control system - Backgauge - Blade gap - Cutting length • Ball screw spindles for the backgauge • Ball transfers on the table • 1,500 mm side gauge • 2 support arms, 1,000 mm each • Cutting line illumination • Hinged 1,000 mm finger guard Optional pneumatic sheet support, EURO 6,320 We have numerous references!

Būklė: naujas, Sheet length: 3,120 mm Sheet thickness: 16.0 mm Total power requirement: 30 kW Weight approx.: 15,000 kg Dimensions (LxWxH): 3,875 x 3,200 x 2,170 mm Our strong brand KK Kletzer NC GUILLOTINE SHEAR swing beam version Model BS offers everything you need for cutting. Technological advantages - Fast and precise cuts - Sturdy, durable frame construction - Easy operation - Low maintenance costs - High safety standards - Use of components from renowned manufacturers - Low unit costs Technical data: Sheet thickness: 16 mm Cutting length: 3,120 mm Cutting angle: 2.5° Number of hold-downs: 15 Backgauge: 1,000 mm, CNC controlled Motor power: 30 kW Cutting speed: 12 cuts/min Throat depth: 150 mm Oil tank: 400 liters Length: 3,875 mm Width: 2,350 / 3,200 mm Height: 2,170 mm Weight: 15,000 kg Equipment and features: - Robust swing beam construction - Blade gap adjustment via the control system - Backgauge - Blade gap - Cutting length - Ball screw spindles for the backgauge - Balls in the table - Side stop 1,500 mm Dsdjd Eqriopfx Ag Iecl - 2 support arms 1,000 mm each - Cutting line illumination - Flip-up finger guard to 1,000 mm Optional pneumatic sheet support, EURO 6,320 -- We have many references!

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, veikimo valandos: 1 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: N2104796, GEM F470 AUTOMATIC CARTON SEALER WITH AUTOMATIC FLAP CLOSING FOR CONSISTENT CARTON SIZES incl. centering unit and Siemens S7 PLC control CARTON DIMENSIONS: - Length: min. 150 mm – max. 600 mm - Width: min. 100 mm – max. 520 mm - Height: min. 100 mm – max. 670 mm TECHNICAL DATA: - Siemens S7-1200 PLC control Dsdpfxeykugxs Ag Iscl - RCC500 infeed centering unit - Vertical drive and guide belts - Carton size adjustment manual - Top and bottom sealing unit - Standard versions T22 / T23 - Tape width from 50 to 50 mm, depending on unit - Adjustable tension - Max. tape reel diameter: 360 mm - Tape reel core: 76 mm - Mains voltage: 400V, 3-phase, N, PE – 50/60 Hz - Power consumption: 0.25 kW - Protection class: IP54 - Operating environment: +5°C to max. +35°C - Conveyor speed: 22 m/min - Average output: 1200 cartons/hour - Working height: 650 mm - Weight: 293 kg - Machine dimensions (L x W x H): 2,470 x 990 x 1,782 mm - CE safety features: lateral sheet metal guards with access door, plus infeed doors L 850 mm, top and bottom cover Image may show optional extras subject to surcharge

Būklė: naujas, Sheet length: 4120 mm Sheet thickness: 6.0 mm Total power requirement: 11 kW Weight approx.: 8,000 kg Dimensions (LxWxH): 4,890 x 2,750 x 1,820 mm Our robust brand KK kletzer NC GUILLOTINE SHEAR, oscillating cut design Model BS offers everything you need for sheet cutting. Technological advantages: - Fast and precise cuts - Stable, durable frame construction - Simple operation - Low maintenance costs - High safety standard - Use of components from renowned manufacturers - Low unit costs Technical data: Sheet thickness: 6 mm Cutting length: 4,160 mm Cutting angle: 1.33° Number of hold-downs: 19 Backgauge: 1,000 mm (CNC controlled) Motor power: 11 kW Cutting speed: 14 cuts/min Throat depth: 150 mm Hydraulic tank: 240 litres Length: 4,890 mm Width: 2,050 / 2,745 mm Height: 1,820 mm Weight: 8,000 kg • Robust oscillating cut design Adjustment of blade gap via the control system - Backgauge Dodjd Eqrgopfx Ag Ijcl - Blade gap - Cutting length • Ball screw drive for the backgauge • Ball transfer table • Side stop, 1,500 mm • 2 support arms, each 1,000 mm • Cutting line illumination • 1,000 mm foldable finger guard Optional pneumatic sheet support system, EUR 8,420 We have numerous references!

Būklė: naujas, Sheet length: 3120 mm Sheet thickness: 13.0 mm Total power requirement: 30 kW Weight approx.: 13,500 kg Dimensions (LxWxH): 3850 x 3160 x 2000 mm Our robust brand KK Kletzer NC GUILLOTINE SHEAR with Swing Cut Design Model BS offers everything you need for cutting operations. Technological Advantages: - Fast and precise cuts - Rigid, durable frame construction - Simple operation - Low maintenance costs - High safety standards - Use of components from renowned manufacturers - Low unit costs Technical Data: Sheet thickness: 13 mm Cutting length: 3,120 mm Cutting angle: 2.5° Number of hold-downs: 15 Backgauge: 1,000 mm via CNC Motor power: 30 kW Cutting speed: 12 (cuts/min) Throat depth: 150 mm Oil tank capacity: 400 liters Length: 3,850 mm Width: 2,270/3,160 mm Height: 2,000 mm Weight: 13,500 kg • Robust swing cut design • Blade gap adjustable via control system - Backgauge - Blade gap - Cutting length • Ball screws for backgauge • Balls integrated in table • 1,500 mm side gauge Dsdpfx Aed Eqrkog Iocl • 2 support arms, each 1,000 mm • Cutting line lighting • Foldable finger guard up to 1,000 mm Optional pneumatic sheet support, EURO 6,320,-- We have numerous references!

Būklė: naujas, Gamybos metai: 2025, Table surface: 2000 x 1000 mm Installation height: 700 mm (distance between table and piston tip) Table height: 800 mm Cylinder diameter: 240 mm Motor power: 7.5 kW Pump capacity: 22 L/min Forward travel speed: 9 mm/sec Return speed: 13 mm/sec Tank capacity: 70 L Capacity: 150 tons – 340 bar / 172 tons – 380 bar Motor control via hand lever Cylinder manually adjustable sideways Bridge adjustable via handwheel Table surface: 2000 x 1000 mm Installation height: 700 mm (distance between table and piston tip) Piston stroke: 400 mm Table height: 800 mm Cylinder: Ø 240 mm Motor: 7.5 kW Pump: 22 L/min – ASC Speed: forward 9 mm/sec – return 13 mm/sec Tank volume: 70 L Djdpfxshu H Dps Ag Iscl Pressure regulator valve Pressure gauge display Pressure-hold valve Weight: 2300 kg

Būklė: naudotas, Gamybos metai: 2006, Funkcionalumas: nepatikrintas, Parduodamas 7 pramoninių elektros variklių ir reduktorinių variklių komplektas. Komplektą sudaro: - Siemens elektros varikliai - VEM Ex variklis (ATEX) - Reduktoriniai varikliai su pramoniniais reduktoriais - Įvairios galios ir konstrukciniai dydžiai Komponentai iš pramoninės srities, profesionaliai išmontuoti. Dedpfszfwwbex Ag Iecl Būklė: Pramonės perteklius. Veikimas netikrintas. Parduodama pagal nuotraukas. Puikiai tinka: - Priežiūrai - Atsarginių dalių sandėliui - Konvejerių technologijai - Maišyklėms - Mašinų gamybai Pageidaujama parduoti kartu. Vieta: Dunajská Streda, Slovakija (ES) Galimas pristatymas visame pasaulyje.

Būklė: naujas, Gamybos metai: 2022, Dimensions (LxWxH): 3660 x 1340 x 2500 mm Number of axes: 3 Pressure: 120 tons Approx. weight: 7000 kg Oil capacity: 200 liters Motor power: 11 kW Press brake control unit: Esa S 630 CNC 10 2D graphical touchscreen display Control unit panel: Swiveling pendant arm Optional hydraulic press brake valve: With CE safety signals Press brake safety PLC: Mcs PLC safety PLC Press brake laser safety system: DSP-AP safety block (manual laser height adjustment) Backgauge for press brake: X-axis, 500 mm travel, including 2 fingers, manually adjustable in height and laterally. Backgauge stopper fingers: Standard Rear and side safety guards: Available (CE-compliant model) Press brake top tool clamping: Manual European type L: 150 mm (Promecam) Press brake upper tool: Eurostamp 1260 / Standard (835 mm and 805 mm segments of 595 mm and 210 mm) Dcsdpfehut Aasx Ag Ijl Press brake lower die holder: Mechanical European type, standard width (Promecam) Press brake crowning: CNC-adjustable motorized crowning (V-axis) Press brake lower die: Eurostamp 2067 / Standard (835 mm and 805 mm segments of 100 mm left, 395 mm, 210 mm, and 100 mm right) Front support arms for press brake: XF front support Number of front supports: 2, manually adjustable in height and lateral position Electrical system: 380 V-660 V, 50-60 Hz, 3 Phase (IE3) Cabinet cooling system: Ventilation with fan Number of foot pedals: One Label group: English label group Packaging method: Plastic wrap with stretch film

Būklė: naujas, Sheet length: 3040 mm Djdpfx Aged Egqzo Ijcl Sheet thickness: 13.0 mm Total power requirement: 30 kW Weight approx.: 13.4 t Dimensions (LxWxH): 3850 x 3270 x 2260 mm Our powerful brand KKI CNC GUILLOTINE SHEAR, swing beam version Model AS 3013 offers everything needed for perfect cutting. CNC swing beam guillotine shear KKI Thanks to robust and durable mechanics and hydraulics, a precise back gauge with ball screw, and user-friendly CNC control, Dener guillotine shears are highly efficient production machines. Shears for sheet thicknesses from 6 mm up to 20 mm and cutting lengths from 3 m to 6 m are part of our standard portfolio. Higher cutting thicknesses and lengths are, of course, available on request. Dener guillotine shears owe their long service life to their especially rugged design with a fully welded frame. The entire machine body, cutting beam, and back gauge are resistant to torsion and deformation, thus ensuring the highest cutting quality. By entering the sheet thickness and material type, the CNC system automatically calculates the required cutting angle and clearance. Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam version Model AS 3013, has everything you need for perfect cutting. Technological Advantages: - Fast and precise cutting - Stable, long-lasting frame construction - Automatic blade gap adjustment - Simple operation - Low maintenance costs - High safety standards - Use of components from renowned manufacturers - Low unit costs With our patented blade support system, we can finely adjust and stabilize the upper blade, thus guaranteeing precise, high-quality cuts. Banana cuts are avoided. Technical Data: Sheet thickness: 13 mm Cutting length: 3,040 mm Cutting angle: 0.5 - 3° Number of hold-downs: 16 Back gauge: 1,000 mm via CNC Motor power: 30 kW Cutting speed (0.5 - 3°): 17-8 (cuts/min) Throat: 350 mm Oil tank: 400 liters Length: 3,850 mm Width: 2,350 / 3,270 mm Height: 2,260 mm Weight: 13,400 kg • Swing beam design • CNC control - Back gauge - Cutting angle - Blade gap - Cutting length • Ball screws for the back gauge • Ball rollers in table • Side gauge 1,500 mm • 2 support arms, 1,000 mm • Cutting line illumination • Hinged finger guard, foldable up to 1,000 mm Optional pneumatic sheet supports, EURO 6,320,-- We have many references!

Būklė: naujas, Cutting area round: 320 Saw blade length: 4160 x 34 x 4.1 Cutting area at 45°: 320 Cutting area rectangular: 450 x 320 Cutting area 45° miter flat: 330 x 320 Cutting speed: 20-100 Dimensions (LxWxH): 2230 x 1150 x 1350 Motor: 2.2 Weight approx.: 1030 KK Kletzer 320DGH Semi-automatic Bandsaw with Double Mitre Head High-performance machine made of structural steel Standard equipment: - Bimetal saw blade M42 - Variable speed - Inverter control unit - Coolant system - Automatic saw blade breakage shut-off system - Hydraulic vice - Hydraulic bow - Saw blade tensioning device - Pendant control - Mitre head, 2 directions - Heavy-duty gearbox Dcsdpfx Asrz Uzmsg Ijl