Donau Ersatzteile pirkti naudotą (291)

Būklė: naujas, Atsarginės dalys Donau greitoms radialinėms gręžimo staklėms Donau DR Donau Danuflex Donau Danumeric Donau Danusys Hnedpfxey Ri H Ij Ag Ejp Donauflex Donaumeric

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1983, Work table 600mm x 1200mm Horizontal arm travel 600mm Tool holder MK 4 Hnsdpfx Aemt Ed Rsg Esp Drilling capacity 32mm in steel Thread-cutting device Coolant system Electrics 24V control voltage Emergency stop, dual-channel Drill safety guard Fully overhauled in 2025 12-month warranty New paint RAL 7035/7031

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1976, Worktable 500mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Tapping device Hedpfx Aswnn S Reg Eenp Coolant system Electrics 24V control voltage Emergency stop, dual channel Safety guard at drill Completely overhauled 2025 12 months warranty New paint finish RAL 7035/7031

Būklė: geras (naudotas), 1 naudota greitaeigio radialinė gręžimo staklė Gamintojas: Donau Modelis: DR 28 Z Pagaminimo metai: 1985 Techniniai duomenys: - Gręžimo našumas į pilną plieną ST 60 – 28 mm - Gręžimo našumas GG 25 – 40 mm - Sriegių pjovimas ST 60 – M 30 - Sriegių pjovimas GG 25 – M 40 - Gręžimo veleno prisijungimas – MK 3 - Veleno skersmuo – 50 mm - Pinos eiga – 150 mm - 18 gręžimo veleno greičiai – 45–2240 aps./min. Hsdpszl Ufcjfx Ag Eonp - 4 gręžimo padavimo greičiai – 0,1–0,45 mm - Min./maks. atstumas nuo veleno iki stalo – 300 / 700 mm - Gręžimo spindulys min./maks. – 305 / 1005 mm - Stalo aukštis – 820 mm - Stalo dydis – 1200 x 600 mm - Variklis – 400 V / 6 kW - Užimamas plotas (apytiksliai): plotis 1300 x aukštis 2800 x gylis 2300 mm - Svoris (apytiksliai): 1500 kg - Įskaičiuota: - Sriegių pjovimo įranga - Hidraulinė kolonėlė + atramų fiksatorius - Aušinimo skysčio įranga - T formos grioveliai – vertikaliai, kairėje staklių pusėje.

Būklė: naujas, Gamybos metai: 2025, VKM supplies spare parts for VKM, Oswald (the full delivery range), and selected Bezner-Oswald and Wema Probst machines, as well as BÖGLI bandsaws and replacement knives manufactured according to drawings for a variety of woodworking machines. Some parts are available from stock. Below are some of the most frequently requested parts: Centring rollers, 40mm bore €112.00/each Centring rollers, 50mm bore €156.00/each Feed roller, 40mm bore €118.00/each Feed roller, 50mm bore €138.00/each Discharge roller, 40mm bore €102.00/each Feed roller, 50mm bore €126.00/each Bezner WP35 peeling disc €3,920.00/each Hsdpfxewagxmo Ag Eonp Oswald RM162 guide carriage RM7072W €302.00/each Oswald RM162 knife holder RM7066W €215.00/each We are happy to provide a quotation including commercial terms. Further spare parts available on request.

Būklė: naujas, VKM supplies spare parts for the complete range of VKM and Oswald equipment, as well as selected Bezner-Oswald and Wema Probst machines, BÖGLI band saws, and custom replacement knives produced to drawing for a wide variety of woodworking machines. Many items are available from stock. Below is a list of some of the most frequently requested parts: Centering rollers, 40 mm bore €112.00/each Centering rollers, 50 mm bore €156.00/each Feed roller, 40 mm bore €118.00/each Hnedsg Rn Avjpfx Ag Ejp Feed roller, 50 mm bore €138.00/each Discharge roller, 40 mm bore €102.00/each Feed roller, 50 mm bore €126.00/each Bezner WP35 peeling disc €3,920.00/each Oswald RM162 guide slide RM7072W €302.00/each Oswald RM162 knife holder RM7066W €215.00/each We will be happy to provide a quotation including commercial terms. Additional spare parts are available upon request.

Būklė: naudotas, Gamybos metai: 1990, Montavimo įtaisas MK 3 Serijos numeris 4131 Atstumas nuo centro 1000 mm Hsdpfxjzkbqvo Ag Esnp Dokumentacija yra Hidraulinis užspaudimas, kW Apytikslis mašinos svoris 2,6 t 3 kubiniai metrai krovininiame automobilyje

Būklė: naudotas, Gamybos metai: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m D O N A U - K N A P P Universal - CNC gesteuerte Zahnstangenfräsmaschine Type UZFM - V 300 H - CNC Hsdpfx Aget Hwwqj Esnp Baujahr 1990 # 90-244x _____ max. Verzahnungslänge 2.100 mm Fräsweg/Fräsbreite quer max. 300 mm Modulbereich St/GG max. 16/18 Tisch-Aufspannfläche 510 x 2.400 bzw. 275 x 2.120 mm Einbauhöhe unter Fräs-Spindel-Achse min./max. 150 / 430 mm Fräser-Ø min. / max. Ø 125 + 2 x Schnitttiefe / 280 mm Fräserbreite max. fliegend / mit Gegenlager 50 / 140 mm Fräserdorn-Ø max. 22 - 50 mm Frässpindelkopf schwenkbar rechts / links (Hinterfräsungen) 30 / 45 ° Frässchlitten schwenkbar rechts / links (Schrägverzahnung) 30 ° 9 Spindeldrehzahlen 40 - 120 U/min. Vorschübe stufenlos (Frässchlitten) / Eilgang 0 - 1.300 / 2.000 mm/Min. Tisch-Eilgang 10.000 mm/Min. Frässpindelantrieb 5,5 kW Gesamtantrieb 10 kW - 400 V - 50 Hz Gewicht 5.000 kg Zubehör / Sonderausstattung: o SIEMENS - CNC - Steuerung Model M 810 für die Teilachse ( X ), sodaß eine schnelle Umstellung der Maschine möglich ist ohne Wechselräder. Teilschritte 0,001 - 2100 mm, auch unterschiedliche Teilungsdistanzen programmierbar, " Einstellung aller Vorschub- und Eilgangwege über die Hydraulik, Vorschub einstellbar für 2 Schnitte, Wegbegrenzung der Achsen über voreinstellbare Endschalter o Aufgebaute hydraulische Werkstückspanneinrichtung ca. 2.000 x 160 mm lang o verstärkter Fräskopf mit stufenlos regelbare Fräserdrehzahl o separat stehender Schaltschrank und Hydraulikanlage , im Tisch eingebauter Späneföderer und separat stehender Späneförderer mit Kühlmitteleinrichtung, Zentralschmierung, etc. Die Maschine könnte auch mit einer aktuellen SIEMENS-Steuerung nachgerüstet werden! Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale and error in technical data: D O N A U - K N A P P (Germany) Universal - CNC-Controlled Rack Milling Machine Model UZFM - V 300 H - CNC Year 1990 Serial No. 90-244x _____ Max. Cutting length 2.100 mm Milling travel / milling width cross max. 300 mm Module in steel / cast iron, max. 16 / 18 Table clamping size 510 x 2.400 resp. 275 x 2.120 mm Mounting height under cutter, depending on cutter Ø 150 - 430 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 280 mm Cutter width max. without/with counter bearing support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling ( for relief cuts ) right / left 30 / 45 ° Milling spindle speeds steplessly adjustable 40 - 120 rpm Milling slide swivelling right / left for Helix Cuts 30 ° Feeds, infinitely variable (milling slide) 0 - 1.300 / 2.000 mm/min Quick return of WP-table 10.000 mm/min Milling spindle drive 5,5 kW Total electrical load 10 kW - 400 V - 50 Hz Weight 5.000 kg Accessories / Special Features: * SIEMENS-CNC-Control for the Indexing axis ( X ) so th...

Būklė: naudotas, Gamybos metai: 1980, Milling length: 1750 mm Milling width: 260 mm Module – max.: 10 Module – min.: 12 Total power requirement: 8 kW Machine weight approx.: 4500 kg Space requirement approx.: m D O N A U - K N A P P Universal Rack Milling Machine Model UZFM - V 300 H Year of manufacture: 1980 # 80-234x ----- Max. gear cutting length: 1,750 mm Milling travel / max. cross milling width: 260 mm Helical gearing up to: 30° Module range steel/grey cast iron max.: 10 to 12 Effective clamping surface (table): 275 x 1,830 mm Mounting height under milling spindle axis min./max.: 150 / 430 mm Milling cutter diameter min. / max.: 108 + 2 x cutting depth / max. 165 mm Max. milling cutter width unsupported / with counter support: 50 / 140 mm Milling arbor diameter max.: 22 - 50 mm 9 spindle speeds: 29 – 178 rpm Milling slide swivels right/left: 30° Milling spindle head swivels right/left: 30 / 45° Infinitely variable feed (milling slide): 0 – 600 mm/min Rapid return: 2,000 mm/min Milling spindle drive approx.: 4 kW Total drive: 8 kW - 400 V - 50 Hz Weight: 4,500 kg Accessories / Special Equipment: • Automatic milling sequence control via cam track on milling head slide and table slide, with skip function (automatic bypass of non-machining areas) and pendulum milling operation (synchronous milling on one half of the table with workpiece changeover on the second half) • Hydraulic workpiece clamping system, continuous approx. 260 x 1800 mm, max. clamping width 140 mm, clamping height approx. 60 mm, with dedicated hydraulic unit and electrical release • Manual fine adjustment of the table (0.001 mm), e.g., for precise positioning into a pre-milled gearing • Various change gears (approx. 10 pcs), 2 arbor mandrels, central lubrication with impulse, built-in hydraulic system, separate coolant device, separate control cabinet, various used rack milling cutters Hnsdpfx Agot Hxago Esp Price, ex stock plus VAT: € 49,500.-- This machine is particularly suitable for milling racks as well as for the production of broaching tools (undercutting by swiveling the milling head). Condition: very good – ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Būklė: geras (naudotas), Gamybos metai: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Taper: MT4 - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm Hsdpfxsirax Uo Ag Eenp - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Dimensions and Travel Paths Tool Holder: SK 40 Table Dimensions: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance, spindle lower edge min.: mm 140 table upper edge max.: mm 740 Drilling radius min.: mm 540 max.: mm 1590 U-axis travel: mm 2600 Y-axis travel: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Values Drilling capacity, solid material St 60: mm 40 GG 22: mm 50 Thread cutting St 60: M 36 GG 22: M 42 Main Spindle Drive AC Motor, frequency controlled kW 5.5 at 100 % duty cycle Speed range: rpm 15 - 2800 Torque: Nm max. 250 Constant from: rpm 15 – 200 Feed Drives X-axis - AC Servo Motor: kW 0.25 Y-axis - AC Servo Motor: kW 0.25 Z-axis - AC Servo Motor: kW 4.50 W-axis - AC Servo Motor: kW 2.50 U-axis - AC Servo Motor: kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min 7.5 / 3 Feed rates, stepless: mm/min 5 - 2000 Feed force: N 12000 Accuracy Positioning accuracy X, Y axis on 1200 mm: mm ± 0.075 Repeatability X, Y axis: mm ± 0.03 Positioning accuracy Z-axis: mm ± 0.05 Repeatability Z-axis: mm ± 0.03 Positioning accuracy W-axis: mm ± 0.05 Repeatability W-axis: mm ± 0.03 Electrical Data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC Control Axes: 5 (X,Y,Z,W,U), expandable Display: TFT flat panel, backlit, clearly visible from all sides Position information: Cartesian or polar, measurements absolute or incremental Unit of measure: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions by machining process, material-dependent cutting data recommendations Tool management: up to 500 tools Subprogram technique: yes Hnedpfx Aev If T Tog Eop Machining cycles: cycles for centering, drilling, tapping, reaming, countersinking, and boring; freely programmable cycle for special tools; dwell time possible in every cycle Chip breaking/chip removal: possible in drilling cycle Drilling patterns: linear, circular, matrix Basic software: conversational programming, 38 zero point shifts, rotating and mirroring, teach-in for X, Y, Z, program restart with selectable entry point Zero point determination: cycles for zero point determination by manually probing the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - alignment of cast and flame-cut parts - angle position detection for round parts by probing reference edges/surfaces Data interfaces: USB interface Coating (Refinishing) Standard painting, two-component textured paint Machine upper part: light grey RAL 7035 Machine base: signal blue RAL 5005 Documentation Operating and programming manual Electrical schematic Spare parts drawings Test report for mechanics, electrics and safety device

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 900 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 700 mm, CNC gręžimo ir frezavimo centras Donau DANUSYS 2910, pagamintas 2002 m., kapitališkai suremontuotas Techniniai duomenys: Valdymas: Heidenhain iTNC 530 Eigos: X-, Y- ir Z ašys: 2900 / 1000 / 700 mm Frezavimas St 60: 300 cm³/min Gręžimas pilnai St. 60: ø 40 mm Sriegimas: M30 Pavaros greitis X-, Y- ir Z ašyje: 7 / 7 / 7 m/min Velenas HSK 63, 15000 aps./min. Aušinimo skystis: vidinis ir išorinis tiekimas (IKZ ir AKZ) Įrankių keitiklis su 32 pozicijomis, padalintas į 2 x 16 vnt. Atnaujintos dalys: - Velenas visiškai suremontuotas ir pervyniotas gamintojo - Veleno valdiklis suremontuotas - Atnaujintas Heidenhain maitinimo blokas - Tikrintas Heidenhain pagrindinis kompiuteris MC422 ir valdymo blokas CC422 - Pakeistas Y ašies vežimėlis ir kreipiančioji Papildoma įranga: Rankenėlė HR 410 Hjdpfx Aezlx Axog Eonp Drožlių transporteris su integruotu aušinimo skysčio baku Dokumentacija (naudojimo instrukcija, įvairūs vadovai naudojamiems dokumentams, elektros schema ir kt.) Parduodama iš sandėlio; tarp pardavimų gali keistis

Būklė: beveik kaip naujas (naudotas), Donau Donauflex 135 greita radialinė gręžimo staklė Gamintojas: Donau Tipas: Donauflex 135 Pagaminimo metai: 2020 Būklė: Labai gera, naudota, bet kaip nauja Iš karto pristatoma iš sandėlio. Hnsdpfx Aszgvmqsg Esp

Būklė: naudotas, Gamybos metai: 1980, MK 3 tvirtinimas Pervaža: 4 pakopos Hjdpfx Aszfqmpsg Eonp Didžiausias apsisukimų skaičius: 2580 X krypties eiga: 2500 mm Išsikišimas: 1000 mm Griovelio plokštė: 1000/2800 mm Svoris: 3,7 t 2 pakuotės Transportui reikalinga 7,5 pakrovimo metrų

Būklė: naudotas, Gamybos metai: 1971, Technical Details: Drilling capacity in steel (diameter): 23 mm Max. workpiece height: ./x. 2 mm Drilling capacity in cast iron: Ø 26 mm Spindle taper: MK 3 Quill stroke: 135 mm (manual/automatic) Spindle speeds: 7-step rpm Feed range: mm/rev Table size: 1200 x 500 mm Clamping surface: 1070 x 400 mm Total power requirement: 3.55 kW Machine weight approx.: 1.4 t Machine dimensions approx. (LxWxH): 1.7 x 1.2 x 2.2 m Hnsdpsv Ay T Djfx Ag Ejp Arm: - Vertical adjustment: 450 mm and horizontal: 610 mm - Swivable 360°, hydraulic clamping Right- and left-hand rotation for tapping with automatic reversing Operation via control panel Coolant tank with pump

Būklė: naudotas, Gamybos metai: 1960, Techninė informacija: Detalės aukštis - maks.: 600 mm Pasiekiamumas: apie 700 mm Gręžimo pajėgumas pliene (skersmuo): 25 mm Stalo dydis: 1100 x 400 mm Šiuo metu įrenginys yra technikos skyriuje. Hsdox Afn Nspfx Ag Esnp Todėl įrenginys NĖRA paskelbtas/eksponuojamas. Remonto darbai dar tęsiami....

Būklė: geras (naudotas), Gamybos metai: 1988, High-Speed Radial Drilling Machine Manufacturer: Donau Hsdjikvcaepfx Ag Ejnp Model: DR 40 DIGI Control: NC control Year of manufacture: 1988 APPLICATIONS – DRILLING Drilling capacity in steel (total hole): 40 mm Arm reach (max): 800 mm SPINDLE / HEAD Spindle speed (min): 335 rpm Spindle speed (max): 1800 rpm Number of gears: 2 Tool holder: MT 4 SPECIFICATIONS Table area: 1200 x 750 mm ELECTRICAL SPECIFICATIONS Mains voltage: 400 V Frequency: 50 Hz DIMENSIONS / WEIGHT Width: 2500 mm Depth: 1250 mm Overall height: 2500 mm Weight: 2.6 t Drive power: 6 kW

Būklė: naudotas, Gamybos metai: 1971, Frezavimo ilgis: 1750 mm Frezavimo plotis: 260 mm Modulis - maks. 10 mm Hodeylpzyopfx Ag Esnp Stalo matmenys su vandens surinkimo lataku: 460 x 2100 mm Stalo tvirtinimo paviršius: 250 x 1850 mm Frezaus plotis - maks. 100 mm Frezu vežimėlio pastūma, be laipsnių: 0 - 500 mm/min. Greitos eigos: 3000 mm/min Frezu galva pasukama ±30° Frezuvelio apsisukimų dažnio diapazonas, 9 žingsniai: 29 - 178 aps./min Frezu galva abipus pasukama nuožulniems dantračiams: 30° Staklių svoris apie 4 t Užimama vieta apie 4 x 1,85 x 1,85 m Įranga/priedai: - 7 spaustuvai - Keičiamieji krumpliaračiai - Tvirtinimo įrankiai - Dokumentacija

Būklė: visiškai atnaujintas (naudotas), Apsisukimų plokštės remontas įvairiems modeliams. Susisiekite su mumis, jei pavarų lygiai nebeveikia tinkamai, kaip pageidaujate. Hsdpfxsy Rfzuo Ag Ejnp

Būklė: geras (naudotas), Gamybos metai: 1990, Atsarginių dalių paketas CNC gręžtuvui. Gamintojas: PFEIFER, tipas: FK 105 CNC, įvorės tvirtinimas ISO 50, pagaminta 1990 m. Hnjdpfx Agoxr Dg No Ejp 1. Pilna ISO 50 veleno galvutė 4. Rutuliniai sraigtai su veržlėmis X-Y-Z-W ašims.

Būklė: naudotas, Gamybos metai: 2000, Spare parts for CNC lathe HITACHI SEIKI Type: HT 23 RIII, year 2000. 1. Spindle head with chuck Hsdpjwf Aftefx Ag Ejnp 1. X and Z axis motors 1. Control panel with monitor 1. X-Z axis drive amplifier 1. Tool turret VDI 40 with 12 positions

Būklė: naudotas, Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 4 000 mm, padavimo eiga Y ašimi: 1 050 mm, padavimo ilgis Z ašis: 200 mm, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Dimensions and Travel Paths Tool holder: SK 40 Table dimensions (mm): 4000 x 800 Number of T-slots: 6 T-slot spacing (mm): 140 Distance - spindle lower edge min. (mm): 140 Distance - table upper edge max. (mm): 740 Drilling radius min (mm): 540 Drilling radius max (mm): 1590 U-axis travel (mm): 2600 Y-axis travel (mm): 1050 Quill stroke (Z-axis) (mm): 200 Column stroke (W-axis) (mm): 400 Machining Performance Drilling capacity in solid material: St 60 (mm): 40 GG 22 (mm): 50 Tapping: St 60: M 36 GG 22: M 42 Main Spindle Drive AC motor, frequency-controlled (kW): 5.5 at 100% duty cycle Speed range (rpm): 15 - 2800 Torque (Nm): max. 250 Constant torque range (rpm): 15 – 200 Feed Drives X-axis – AC servo motor (kW): 0.25 Y-axis – AC servo motor (kW): 0.25 Z-axis – AC servo motor (kW): 4.50 W-axis – AC servo motor (kW): 2.50 U-axis – AC servo motor (kW): 2.50 Rapid traverse speeds (X/Y/Z) (m/min): 7.5 / 7.5 / 5 Rapid traverse speeds (U/W) (m/min): 7.5 / 3 Feed rates, stepless (mm/min): 5 - 2000 Feed force (N): 12000 Accuracy Positioning accuracy X, Y-axis (over 1200 mm) (mm): ±0.075 Repeatability X, Y-axis (mm): ±0.03 Positioning accuracy Z-axis (mm): ±0.05 Repeatability Z-axis (mm): ±0.03 Positioning accuracy W-axis (mm): ±0.05 Repeatability W-axis (mm): ±0.03 Electrical Data Operating voltage/frequency (V/Hz): 400 / 50 Hsdpfxey Ttrto Ag Eonp Control voltage (V): 24 Total connected load (kVA): 13.0 CNC Control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat panel, backlit, easily readable from all sides Position display: Cartesian or polar, dimensions absolute or incremental Units: mm or inch, as well as degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions based on machining type, material-dependent cutting data recommendations Tool management: Up to 500 tools Subprogram support: yes Machining cycles: Cycles for centering, drilling, tapping, reaming, countersinking, and boring; freely programmable cycle for special tools; dwell time possible for each cycle Chip breaking / chip removal: possible during drilling cycle Drilling patterns: drill row, bolt circle, matrix Basic software: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted start Datum determination: Cycles for determining zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle determination for round parts by probing reference edges/surfaces Data interfaces Paintwork with signs of use Standard paint, two-component textured paint Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical circuit diagram Spare parts drawings Test report for mechanics, electrical system, and safety equipment

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamintojas: KNAPP-DONAU Modelis: UZFM Pagaminimo metai: 1974 Būklė: naudotas Hodpfx Agsy Rgmrs Eonp Kaina & Vieta Vieta: Rostokas, Vokietija Frezavimo ilgis: 1800 mm Frezavimo plotis: 260 mm Didžiausias modulis: 10 mm Stalo matmenys, įskaitant vandens lataką: 460 x 2100 mm Prispaudimo paviršius: 250 x 1850 mm Didžiausias frezos plotis: 100 mm Frezavimo stumoklio pastūma, bepakopė: 0 – 500 mm/min. Greitoji eiga: 3000 mm/min Frezavimo galvutė pasukama: ±30° Frezavimo veleno sūkių diapazonas, 9 žingsniai: 29–178 aps./min. Frezavimo galvutė pasukama į abi puses nuožulniai dantavimui: 30° Staklių svoris: apie 35 t Erdvės poreikis: apie 4 x 1,85 x 1,85 m Įranga/priedai: - 11 spaustuvų - Pakeičiami krumpliaračiai - Tvirtinimo įranga - Dokumentacija

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, plunksnos brūkšnys: 190 mm, veleno greitis (min.): 41 aps./min, veleno greitis (maks.): 1 800 aps./min, bendras svoris: 1 920 kg, ruošinio svoris (maks.): 17 kg, plieno lakšto storis (maks.): 32 mm, sukimo momentas: 250 Nm, stalo aukštis: 900 mm, Used DONAU quick radial drilling machine type DR 32 - fully overhauled by vaumatec in 2022 - equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve table frame load) Technical Data: Drilling capacity (solid): Steel 60/E335 mm Ø 32 (with feed rate 0.20 mm/rev): Cast iron 22 mm Ø 45 Tapping: Steel 60/E355 M26 Tapping: Cast iron 22 M35 Tool holder: MT4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Working table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Hedpfx Agjrn Riqe Eonp Max. spindle torque: Nm 250 Arm mobility, radial: N 25 Arm mobility, axial: N 25 Clamping force, radial: Nm 3500 Clamping force, axial: N 5500 Feed force: N 7500 Max. allowable mass: kg 17 Max. allowable inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the center of the working surface

Būklė: naujas, SPS pavarų perjungimo plokštė Nauja vietoj senos Savarankiškam montavimui arba montavimui vieno iš mūsų technikų Hnsdpfjy Rkkhex Ag Ejp