Donau Donau Dr, Danuflex, Danumeric pirkti naudotą (4 703)

Būklė: naujas, Atsarginės dalys Donau greitoms radialinėms gręžimo staklėms Donau DR Donau Danuflex Gusdpfx Aey Ri H Iol Nod Donau Danumeric Donau Danusys Donauflex Donaumeric

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1983, Work table 600mm x 1200mm Horizontal arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Gsdpfx Alsmt Ed Rj Njud Thread-cutting device Coolant system Electrics 24V control voltage Emergency stop, dual-channel Drill safety guard Fully overhauled in 2025 12-month warranty New paint RAL 7035/7031

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1976, Worktable 500mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Tapping device Gsdewnn S Rjpfx Al Njud Coolant system Electrics 24V control voltage Emergency stop, dual channel Safety guard at drill Completely overhauled 2025 12 months warranty New paint finish RAL 7035/7031

Būklė: naudotas, Gamybos metai: 1971, Technical Details: Drilling capacity in steel (diameter): 23 mm Max. workpiece height: ./x. 2 mm Drilling capacity in cast iron: Ø 26 mm Spindle taper: MK 3 Quill stroke: 135 mm (manual/automatic) Spindle speeds: 7-step rpm Feed range: mm/rev Table size: 1200 x 500 mm Clamping surface: 1070 x 400 mm Guodpjv Ay T Dofx Al Njd Total power requirement: 3.55 kW Machine weight approx.: 1.4 t Machine dimensions approx. (LxWxH): 1.7 x 1.2 x 2.2 m Arm: - Vertical adjustment: 450 mm and horizontal: 610 mm - Swivable 360°, hydraulic clamping Right- and left-hand rotation for tapping with automatic reversing Operation via control panel Coolant tank with pump

Būklė: visiškai atnaujintas (naudotas), Apsisukimų plokštės remontas įvairiems modeliams. Susisiekite su mumis, jei pavarų lygiai nebeveikia tinkamai, kaip pageidaujate. Guedpfey Rfzuex Al Nod

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, plunksnos brūkšnys: 190 mm, veleno greitis (min.): 41 aps./min, veleno greitis (maks.): 1 800 aps./min, bendras svoris: 1 920 kg, ruošinio svoris (maks.): 17 kg, plieno lakšto storis (maks.): 32 mm, sukimo momentas: 250 Nm, stalo aukštis: 900 mm, Used DONAU quick radial drilling machine type DR 32 - fully overhauled by vaumatec in 2022 - equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve table frame load) Technical Data: Drilling capacity (solid): Steel 60/E335 mm Ø 32 (with feed rate 0.20 mm/rev): Cast iron 22 mm Ø 45 Tapping: Steel 60/E355 M26 Tapping: Cast iron 22 M35 Gusdporn Riqsfx Al Njd Tool holder: MT4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Working table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Max. spindle torque: Nm 250 Arm mobility, radial: N 25 Arm mobility, axial: N 25 Clamping force, radial: Nm 3500 Clamping force, axial: N 5500 Feed force: N 7500 Max. allowable mass: kg 17 Max. allowable inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the center of the working surface

Gamybos metai: 2018, būklė: paruoštas naudoti (naudotas), Parduodama 2018 m. pilnai renovuota CNC radialinė gręžimo staklės. Darbo sritis X/Y: 1050mm/1800mm, gręžimo pajėgumas plienui: 40mm, ketaus: 50mm, sriegimas: M36-M45, įrankio tvirtinimas: SK40, apsisukimų diapazonas: 15 aps./min–2800 aps./min, išilginis pinolės eiga Z: 200mm, kolonos eiga W: 410mm, stalo tvirtinimo paviršius X/Y: 1800mm/600mm, padavimo greitis: 5 mm/min–2000 mm/min, greitasis padavimas X/Y: 7,5 m/min, valdymas: CNC valdymas. Įrengta 360° pasukama sistema, motorizuotas įrankio tvirtinimas, trijų žandikaulių griebtuvas apvaliems ruošiniams, modernizuotas LCD monitorius, platus įrankių komplektas. Svoris: apie 2900kg, bendri matmenys X/Y/Z: apie 2600mm/1900mm/2950mm. Apžiūra galima susitarus iš anksto. Gedpfxjy Tn Nts Al Njud

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1995, Gręžimo pajėgumas St 60/GG 22: 40/50 mm Sriegimo pajėgumas St 60/GG 22: M 36/M 45 Stalo prispaudimo paviršius: 600 x 1800 mm Galinės svirties aukščio reguliavimas: 450 mm Mažas/didelis gręžimo spindulys: 305/1305 mm Gusdpey I Ua Iofx Al Ned Veleno tvirtinimas: SK 40 Pinolio eiga: 200 mm Veleno apsukos be pakopų: 15 - 2800 ap./min Be pakopų padavimas: 5 - 2000 mm/min Veleno pavara, dažnio valdymas: 5,5 kW Elektros pajungimas: 400 V, 14 kVA Svoris: 3400 kg Užimama vieta: 3800 x 2000 x 2500 mm

Būklė: paruoštas naudoti (naudotas), DONAU DR 23 - greita radialinė gręžimo staklė - Gręžimo našumas / Plienas apie 28 mm - Išsikišimas 700 mm - Morse kūgis MK 3 - Apsisukimų diapazonas 70-1550 aps./min. (transmisija) - Automatinės padavimas 0,075-0,3 mm - Sriegimo įtaisas - Gręžimo gylis apie 130 mm - Hidraulinis užspaudimas - Dokumentacija Guodpsy Uv Tvjfx Al Nsd Matmenys: Ilgis x Plotis x Aukštis 2x1,7x1,9 m / Svoris 1900 kg Galimi netikslumai ar įvedimo klaidos.

Būklė: paruoštas naudoti (naudotas), Donau Danumeric 440 Radial Drilling Machine Gsdpfsyrdc Ssx Al Nsud Drilling capacity (steel): Ø 40 mm Thread cutting: up to approx. M36 (depending on material) Tool holder: SK 40 Spindle speed: approx. 15 – 2,800 rpm (stepless) Feed: stepless, approx. 5 – 2,000 mm/min Quill stroke (Z): 200 mm Column travel (W): 410 mm Arm travel: 1,050 mm Drilling radius: approx. 540 – 1,290 mm Arm swiveling range: approx. 330° Column diameter: 195 mm You are welcome to come by for an inspection. We can gladly arrange cost-efficient shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see our other offers. Brand names and trademarks mentioned are the property of their respective owners and serve only for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Būklė: naudotas, Gamybos metai: 1968, Donau greito sukinio radialinė gręžimo staklės, tipas DR 32 Sukimosi greitis: 60 - 1800 aps./min Strėlės išsikišimas: 600 mm Pagrindo plokštė: 100 x 1400 x 110 mm Sriegimo įrenginys Aušinimo skysčio sistema Staklių lempa Gusdpjx Hgkvofx Al Ned Greito keitimo laikiklis su įdėklais Staklinis spaustuvas

Būklė: naudotas, Gamybos metai: 1987, Siūlome šį naudotą greitaeigį radialinį gręžtuvą Donau DR 40-Z, pagamintą 1987 m. Gsdpfx Aley Dn E Ns Nsud Gamintojas: Donau Modelis: DR 40-Z Serijos numeris: 1146-3 Jei turite klausimų ar reikia daugiau informacijos, rašykite mums žinutę. Įrenginio vieta – Osterode/Harcas. Įrenginį galima apžiūrėti susitarus iš anksto. Tai naudotas įrenginys, todėl parduodamas be jokios garantijos.

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 x 18 mm T-slots at the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting device • Centralized lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travels Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table top min/max mm 70 / 680 Distance spindle nose – floor min/max mm 970 / 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining capacities Drilling capacity solid material: St 60 Ø 40 mm, GG 22 Ø 50 mm Thread cutting: St 60 M 36, GG 22 M 42 Main spindle drive AC Motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 – 2800 Torque: Nm max. 250 (constant between 15 – 2000 min-1) Feed drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Stepless feeds: mm/min 5 – 2000 Accuracy Positioning accuracy (X, Y-axis over 1200 mm): mm ± 0.075 Electrical data Operating voltage/frequency: V/Hz 400 / 50 Control voltage: V 24 Hydraulic unit for clamping: kW 0.75 Total connected load: kVA 13.0 Weight Danumeric 440 (without packaging) with 1800 x 600 mm table: kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, legible from all sides, 215 x 160 mm Position display: kartesian or polar, absolute or incremental values Unit of measure: mm or inch, or degrees Guedoyxw Ddspfx Al Nsd Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions based on machining type, material-related cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selectable entry options Reference point determination: Cycles for determining reference points by manual probing of the workpiece for: – arbitrarily clamped rectangular parts – arbitrarily clamped round parts – alignment of cast and flame-cut parts – Angle position detection on round parts by probing reference edges/surfaces Test graphic: Graphic display of drilling patterns

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Boom travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 x 18 mm T-slots each on the machine base, rear and left • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose - min. mm 40 table surface max. mm 710 Distance spindle nose - min. mm 840 base plate max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Maximum drilling capacity solid Steel 60 Ø 45 Cast iron 22 Ø 55 Thread cutting Steel 60 M 36 Cast iron 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 constant from min⁻¹ 15 - 200 Gujdpfx Aleynt Ucj Ned Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2600 Documentation Operating manual, including Lubrication and hydraulic diagram Wiring diagram

Būklė: naudotas, Gamybos metai: 1989, Gręžimo galia pliene (skersmuo): 32 mm Išsikišimas: 1230 mm Stalo paviršius: 1200 x 500 mm Gręžimo eiga: 180 mm Padavimas – automatinis: 0,10 - 0,15 - 0,20 - 0,30 mm Guedpfx Aey Aa H Nol Njd Sūkių diapazonas: 60 - 1800 aps./min Kūginė jungtis: MK 4 Bendra galingumo paklausa: 2,7 kW Staklių svoris apie: 1,8 t Užimamas plotas apie: 2,2 x 1,8 x 2,3 m Greita radialinė gręžimo staklės su: - automatiniu padavimu - sriegimo įrenginiu

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Boom travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 x 18 mm T-slots each on the machine base, rear and left • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose - min. mm 40 table surface max. mm 710 Distance spindle nose - min. mm 840 base plate max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Gedpsylnpisfx Al Nsud Work table height mm 900 Machining Capacities Maximum drilling capacity solid Steel 60 Ø 45 Cast iron 22 Ø 55 Thread cutting Steel 60 M 36 Cast iron 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 constant from min⁻¹ 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2600 Documentation Operating manual, including Lubrication and hydraulic diagram Wiring diagram

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Boom travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 x 18 mm T-slots each on the machine base, rear and left • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Gujdpfx Alsyhdvks Njd Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose - min. mm 40 table surface max. mm 710 Distance spindle nose - min. mm 840 base plate max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Maximum drilling capacity solid Steel 60 Ø 45 Cast iron 22 Ø 55 Thread cutting Steel 60 M 36 Cast iron 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 constant from min⁻¹ 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2600 Documentation Operating manual, including Lubrication and hydraulic diagram Wiring diagram

Būklė: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Gedpfju Aa I Ssx Al Noud Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Danumeric 440 – Fully Overhauled and Digitized in 2024 Machine Specifications • Work table 1800 x 600 mm with 4 T-slots • Overarm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine light • CE marking • Safety guard Gujdsu Dg D Aspfx Al Nsd • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle lower edge to table top: min. 70 mm, max. 680 mm Distance spindle lower edge to floor: min. 970 mm, max. 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacity Max. drilling in solid material: • St 60: ⌀ 40 mm • GG 22: ⌀ 50 mm Thread cutting: • St 60: M36 • GG 22: M42 Main Spindle Drive AC motor, frequency-controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm, constant from 15 – 2000 rpm Feed Drives X-axis – AC servo motor: 0.25 kW Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Precision Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight Danumeric 440 (without packaging) With table 1800 x 600 mm: 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat panel, backlit, clearly readable from all angles, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram functions: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirror functions, teach-in for X, Y, Z, restart in the program with selectable options for targeted re-entry Zero point determination: Cycles to determine zero points by manual probing of the workpiece for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of hole patterns Data interface: USB

Būklė: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking Guedpfsrmkfnjx Al Ned • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device Guedpfx Aevv Spkol Nod • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each at machine base rear and left • 3-axis digital display • Machine lamp • Central lubrication Godpfx Aox Uwpxjl Neud • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Tool holder MK 4 Column diameter 195 mm Table dimensions 1200 x 750 mm Number of T-slots 5 T-slot spacing 125 mm Quill stroke 220 mm Column travel 450 mm Distance spindle collar - min 40 mm table top max. 710 mm Distance spindle collar - min 840 mm base plate max. 1510 mm Drilling radius min 540 mm max. 1590 mm Working table height 900 mm Machining Capacities Drilling capacity in solid St 60 ⌀ 45 GG 22 ⌀ 55 Tapping St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled 5.5 kW at 100% duty cycle Speed range: 15 - 2800 rpm Torque max. 250 Nm constant from 15 - 200 rpm Feed Drives Infinitely variable feed 0.02 - 0.7 mm/rev Feed force 12000 N Electrical Data Operating voltage / frequency 400 V / 50 Hz Control voltage 24 V Total connected load 9.3 kVA Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm 2600 kg Documentation Operating manual, including Lubrication and hydraulic diagram Electrical schematic

Būklė: naudotas, Gamybos metai: 1991, veleno tvirtinimas: MK 4, Darbo stalas 600 mm x 1200 mm Konsolės eiga 600 mm Įrankio laikiklis MK 4 Gusdpex N Iftofx Al Ned Gręžimo geba 40 mm pliene Sriegiklio įrenginys Aušinimo skysčio įranga Dokumentacija

Būklė: naudotas, Gamybos metai: 1991, Darbo stalas 600mm x 1200mm Konsolės eiga 600mm Guodpfxoxpfglj Al Njd Įrankio tvirtinimas MK 3 Gręžimo pajėgumas 28mm pliene Sriegimo įrenginys Aušinimo sistema Dokumentacija

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1980, Darbo stalas 500 mm x 1200 mm Išsikišimo eiga 600 mm Įrankio tvirtinimas MK 4 Gręžimo galia 32 mm pliene Godpfxox N Ih Ie Al Njud Sriegimo įrenginys Aušinimo įrenginys Apsaugos įtaisas ant grąžto Pilnai atnaujintas 2026 m.