Cronosstech Hgm 3100X10 pirkti naudotą (201)

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: CNC valdymas, pavaros tipas: hidraulinis, darbinis plotis: 3 100 mm, pjovimo kampas (min.): 0,5 °, pjovimo kampas (maks.): 3 °, eigos dažnis (min.): 13 aps./min, maks. lakšto storis: 10 mm, plieno lakšto storis (maks.): 10 mm, Standard Features • ELGO P40T Touchscreen NC Control Unit • Rexroth / Hoerbiger hydraulic system • Automatic CNC-controlled blade gap, stroke, and cutting angle adjustment • 1,000 mm NC-controlled, programmable, motorized backgauge • 250 mm throat depth • Programmable backgauge retract movement • Backgauge rise function for parts longer than 1,000 mm • Programmable cutting length via control panel to increase cycle count for short cuts • Ball transfer sheet support table • Upper blade with 2 cutting edges / lower blade with 4 cutting edges • Special joint system reducing maintenance requirements • 1,000 mm front support arms, with ruler, T-slot, and stopper • Front and side safety guards Nsdpfxex Npdds Ag Helf • Cutting line illumination and shadow wire • 1,000 mm front finger guard with foldable cover • Foot pedal • Movable control panel and protective cabins • Emergency stop buttons Optional Features • Rear pneumatic sheet support system (Type 1) • Rear pneumatic sheet support system with front feed (Type 2) • Adjustable angle gauge 0-180º • Front support arms in custom lengths • Special throat depth 500 mm • Full-length foldable front finger guard cover • Front finger safety light curtain • Special blade • Laser cutting line • Oil heater or oil cooler • Automatic or manual central lubrication • Electrical cabinet with air conditioning • CNC front support sheet followers • Rear light barrier compliant with CE standards • Light type guards TECHNICAL SPECIFICATIONS VALUE Cutting capacity (450 N/mm²) 10 mm Cutting capacity (700 N/mm²) 6 mm Cutting length 3100 mm Cutting angle 0.5 – 3° Cutting speed / Fast mode 7 / 13 strokes per minute (spm) Throat depth 250 mm Backgauge travel (X) 1000 mm Table length 3600 mm Table width 880 mm Motor power 22 kW Weight 10.5 tons

Būklė: naujas, Gamybos metai: 2026, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: hidraulinis, valdiklių gamintojas: ELGO, valdiklio modelis: ELGO P40T 5.7”, darbinis plotis: 3 100 mm, eigos dažnis (min.): 14 aps./min, maks. lakšto storis: 13 mm, plieno lakšto storis (maks.): 13 mm, galia: 22 kW (29,91 AG), Įranga: CE žymėjimas, Tipinė plokštelė prieinama, avarinis stabdymas, dokumentacija / vadovas, kojinis nuotolinio valdymo pultas, pirštų apsauga, HGM B13-3100 – 13 mm x 3100 mm Hydraulic Guillotine Shear Manufactured in Turkey by CRONOSSTECH, the HGM B13-3100 Hydraulic Guillotine Shear is designed for metal processing, steel construction, machine manufacturing, and general sheet metal applications, offering a 13 mm cutting capacity and a 3100 mm cutting length. With the ELGO P40T touch NC control unit, motorized backgauge system, Rexroth hydraulic system, and dual-speed cutting technology, it ensures precise and efficient cutting performance. Standard Features Throat Depth: 250 mm Cutting Length: 3100 mm Cutting Angle: 2.1° Distance Between Columns: 3340 mm Cutting Capacity: 13 mm ELGO P40T 5.7” Touchscreen NC Control Unit 5.7” TFT touchscreen display Manual operation mode Single piece processing Program memory Nlsdpfx Agozbqyij Hjf Digital outputs up to 2A Automatic calculation of blade gap, cutting angle, and hold-down settings based on material Automatic cutting program Rear sheet support system RTS (Return To Sender) function Manual Blade Gap Adjustment System Programmable Backgauge Retraction System Automatic lifting for parts over 1000 mm CRONOSSTECH X-Axis Motorized NC Controlled Backgauge X-axis travel: 1000 mm Speed: 150 mm/s Accuracy: ±0.05 mm Steel body Hardened ball screw Front Support Arms 1000 mm length Ruler T-slot Flip-up stopper Swing-away Front Finger Guard (1000 mm) Upper Blade 2 cutting edges 450 N/mm² capacity Lower Blade 4 cutting edges 450 N/mm² capacity Foot Pedal with Emergency Stop Rear Safety System (EOS2E 2BX) 2 laser beams Type 2 – SIL1 safety level 510 mm monitoring height 3 ms response time IP65 / IP67 protection rating Shadow Line Cutting Indicator Ball Transfer Table Schneider or Siemens Electrical Components (400V / 50Hz) CRONOSSTECH Premium Front and Rear Guarding Rexroth Hydraulic System Dual Speed Cutting System Energy-Saving Standby Mode Optional Features Automatic Blade Gap Adjustment System (ELGO P40T) Pneumatic Sheet Support System (Type 1 - Dual Position) 1250 mm or 1500 mm X-axis backgauge 1500 / 2000 / 3000 mm front support arms Full-length foldable front guard system Technical Specifications Cutting Capacity (450 N/mm²): 13 mm Cutting Capacity (700 N/mm²): 8 mm Cutting Length: 3100 mm Cutting Angle: 2.1° Number of Hold-down Cylinders: 14 Cutting Speed / Fast Mode: 9 / 14 strokes per minute Distance Between Columns: 3340 mm Table Height: 880 mm Table Width: 620 mm Throat Depth: 250 mm Backgauge Stroke (X Axis): 1000 mm Machine Length: 4860 mm Machine Width: 3585 mm Machine Height: 2300 mm Oil Tank Capacity: 265 L Motor Power: 22 kW Machine Weight: 11.5 Tons This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Būklė: naujas, Gamybos metai: 2026, valdymo tipas: CNC valdymas, pavaros tipas: hidraulinis, valdiklių gamintojas: ELGO, valdiklio modelis: ELGO P40T 5,7 ", darbinis plotis: 4 000 mm, eigos dažnis (min.): 12 aps./min, maks. lakšto storis: 16 mm, plieno lakšto storis (maks.): 16 mm, atgalinio ribotuvo reguliavimas: valdomas CNC, galia: 30 kW (40,79 AG), garantijos trukmė: 12 mėnesiai, Įranga: CE žymėjimas, Tipinė plokštelė prieinama, avarinis stabdymas, dokumentacija / vadovas, kojinis nuotolinio valdymo pultas, pirštų apsauga, HGM B16-4000 – 16 mm x 4000 mm Hydraulic Guillotine Shear Manufactured in Turkey by CRONOSSTECH, the HGM B16-4000 Hydraulic Guillotine Shear features a 16 mm sheet cutting capacity and a 4000 mm cutting length, making it ideal for heavy industry, steel construction, shipbuilding, machinery manufacturing, and high-capacity sheet metal processing applications. Thanks to the ELGO P40T touchscreen CNC control unit, automatic blade gap adjustment system, motorized backgauge system, and Rexroth hydraulic system, it enables precise and efficient cutting performance. Standard Features Nedpfx Aozbqzyog Hslf - Throat Depth: 250 mm - Cutting Length: 4000 mm - Distance Between Uprights: 4580 mm - Cutting Capacity: 16 mm - ELGO P40T 5.7” Touchscreen CNC Control Unit - 5.7” TFT touchscreen - Manual operation mode - Single piece processing - Program memory - Digital outputs up to 2A - Automatic blade gap, cutting angle, and pressing force calculation according to material - Automatic cutting program - RTS function rear sheet support system - Automatic Blade Gap Adjustment System - Automatic calculation and adjustment based on sheet thickness - Programmable Backgauge Return System - Automatic lift for pieces over 1000 mm - X Axis Motorized NC Controlled Backgauge - X axis travel: 1000 mm - Speed: 150 mm/s - Accuracy: ±0.05 mm - Steel body - Hardened ball screw spindle - Front Support Arms - Length: 1000 mm - Scale - T-slot - Moveable stopper - Front Finger Guard System - 1000 mm openable front guard cover - Upper Blade - 2 cutting edges - Capacity: 450 N/mm² - Lower Blade - 4 cutting edges - Capacity: 450 N/mm² - Emergency Stop Foot Pedal - Rear Safety System (EOS2E 2BX) - 2 laser beams - Type 2 – SIL1 safety level - 510 mm monitoring height - 3 ms response time - IP65 / IP67 protection class - Shadow Line Cutting Guide - Ball Transfer Table - Schneider or Siemens Electrical Equipment (400V / 50Hz) - Premium Front and Rear Cabin Guards - Rexroth Hydraulic System - Energy Saving Standby Mode Optional Features - Pneumatic Sheet Support System (Type 2 – 4-position RTS Function) - 4-position pneumatic support - Stable support for large sheets - Reduces sheet bending and deformation - RTS (Return To Sender) feature - Enhances operator comfort and safety - Extended X Axis Backgauge - 1250 mm - 1500 mm - Extended Front Support Arms - 1500 mm - 2000 mm - 3000 mm - Full-Length Openable Front Guard System Technical Specifications - Cutting Capacity (450 N/mm²): 16 mm - Cutting Capacity (700 N/mm²): 10 mm - Cutting Length: 4000 mm - Cutting Angle: 0.5° – 3.0° - Number of Hold-down Cylinders: 18 - Cutting Speed / Rapid Mode: 6 / 12 spm - Distance Between Uprights: 4580 mm - Table Height: 1010 mm - Table Width: 700 mm - Throat Depth: 250 mm - Backgauge Travel (X Axis): 1000 mm - Machine Length: 5980 mm - Machine Width: 3750 mm - Machine Height: 2825 mm - Hydraulic Tank Capacity: 390 L - Motor Power: 30 kW - Machine Weight: 21.5 Tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Būklė: naujas, Gamybos metai: 2026, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: hidraulinis, valdiklių gamintojas: ELGO, valdiklio modelis: P40T 5,7", darbinis plotis: 3 100 mm, maks. lakšto storis: 20 mm, plieno lakšto storis (maks.): 20 mm, atgalinio ribotuvo reguliavimas: valdomas CNC, galia: 37 kW (50,31 AG), Įranga: CE žymėjimas, Tipinė plokštelė prieinama, apsaugos šviesos užtvara, avarinis stabdymas, dokumentacija / vadovas, kojinis nuotolinio valdymo pultas, pirštų apsauga, HGM B20-3100 – 20 mm x 3100 mm Hydraulic Guillotine Shear Manufactured in Turkey by CRONOSSTECH, the HGM B20-3100 Hydraulic Guillotine Shear is engineered for heavy industry, steel construction, shipbuilding, energy sectors, and high-capacity metalworking applications, featuring a 20 mm sheet cutting capacity and 3100 mm cutting length. With the ELGO P40T touch-screen CNC control unit, motorized backgauge system, Rexroth hydraulic system, and dual-speed cutting technology, it delivers high performance and precise cutting operations. Standard Features • Throat Depth: 250 mm • Cutting Length: 3100 mm • Cutting Angle: 2.75° • Clearance Between Columns: 3410 mm • Cutting Capacity: 20 mm • ELGO P40T 5.7” Touchscreen CNC Control Unit - 5.7” TFT touchscreen - Manual mode - Single cut operation - Program memory - Digital outputs up to 2A - Automatic cutting angle and clamping force calculation based on material - Automatic cutting program • Rear Sheet Support System - RTS (Return To Sender) function - Manual Blade Clearance Adjustment System - Programmable Backgauge Retract System - Automatic lifting for parts over 1000 mm • CRONOSSTECH Motorized NC Controlled Backgauge (X Axis) - X axis movement: 1000 mm - Speed: 150 mm/sec - Accuracy: ±0.05 mm - Steel construction - Hardened ball screw - Optional: 1250 mm or 1500 mm travel • Front Support Arms - 1000 mm length - Ruler measurement system - T-slot - Flip-stop • Hinged Front Finger Guard - 1000 mm hinged front guard cover - Optional full-length opening guard • Upper Blade - 2 cutting edges - 450 N/mm² capacity • Lower Blade - 4 cutting edges - 450 N/mm² capacity • Foot Pedal with Emergency Stop • Rear Safety System (EOS2E 2BX) - 2 laser beams - Type 2 – SIL1 – SILCL1 safety level - 510 mm monitoring height - 3 ms response time - IP65 / IP67 protection - 24V DC power supply • Emergency Stop Buttons • Shadow Line Lighting • Ball Transfer Table • Schneider or Siemens Electrical Components (400V / 50Hz) • CRONOSSTECH Premium Front and Rear Cabin Guards - Professional appearance - Wide viewing area - Ergonomic design • Rexroth Hydraulic System • Dual-Speed Cutting System - Two selectable cutting speeds - Faster operation on short parts - High-speed cutting up to 60% of maximum capacity • Energy-Efficient Standby Mode Optional Features • 1250 mm or 1500 mm X-axis backgauge • Full-length opening front guard Technical Specifications • Cutting Capacity (450 N/mm²): 20 mm • Cutting Capacity (700 N/mm²): 13 mm • Cutting Length: 3100 mm • Cutting Angle: 2.75° • Number of Hold-Down Cylinders: 17 Nlsdpszbyupjfx Ag Hjf • Cutting Speed / Fast Mode: 6 / 9 spm • Clearance Between Columns: 3410 mm • Table Height: 925 mm • Table Width: 605 mm • Throat Depth: 250 mm • Backgauge Stroke (X Axis): 1000 mm • Machine Length: 4790 mm • Machine Width: 3850 mm • Machine Height: 2540 mm • Oil Tank Capacity: 495 L • Motor Power: 37 kW • Machine Weight: 19 Tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: CNC valdymas, pavaros tipas: hidraulinis, darbinis plotis: 3 100 mm, pjovimo kampas (min.): 0,5 °, pjovimo kampas (maks.): 2 °, eigos dažnis (min.): 15 aps./min, maks. lakšto storis: 6 mm, plieno lakšto storis (maks.): 6 mm, STANDARD FEATURES CNC-controlled, angle-adjustable hydraulic guillotine shear CNC-controlled blade gap adjustment, stroke, and cutting angle adjustment Touchscreen CNC control unit (ELGO P40T) Automatic cutting angle adjustment based on material type and thickness Automatic stroke reduction for short sheet cutting (higher speed) CNC software infrastructure minimizing user errors Stress-relieved, heavy-duty steel frame construction Hardened guides and roller-type upper beam movement system 1,000 mm CNC-controlled, motorized and programmable backgauge Backgauge features: - Programmable retract function - Lift-up feature for long parts - ±0.1 mm positioning accuracy Front support table with ball transfer system Upper blade: 2 cutting edges / Lower blade: 4 cutting edges High-alloy steel blades Special joint system minimizing maintenance requirements Front support arms with scale, T-slot, and stops (1,000 mm) Cutting line illumination and shadow wire Front finger guard plate (flip-up type) Front and side safety covers Foot pedal Movable control pendant Emergency stop buttons Safety equipment in compliance with CE standards OPTIONAL FEATURES Rear pneumatic sheet support system – Type 1 Nledpox Nqp Iefx Ag Hsf Rear pneumatic sheet support system – Type 2 (forward feeding) Angle-adjustable front square arm (0–180°) Front support arms in desired lengths Full-length flip-up front finger guard Front finger safety light curtain Rear safety light barrier (CE compliant) Special blade options Laser cutting line indicator Oil heater or oil cooler Automatic or manual central lubrication system Air-conditioned electric cabinet cooling system CNC-controlled front sheet support and feed arms Custom throat depth (500 mm) Light-type guards TECHNICAL SPECIFICATIONS (C 06 / 3100 MODEL) Cutting capacity (450 N/mm²): 6 mm Cutting capacity (700 N/mm²): 4 mm Cutting length: 3,100 mm Cutting angle: 0.5° – 2° (CNC-controlled) Stroke adjustment: Automatic Throat depth: 250 mm Backgauge travel (X-axis): 1,000 mm Cutting speed: 10 – 15 strokes/min Motor power: 10 kW Oil tank capacity: 200 liters Machine weight: ~6.7 tons Machine dimensions (LxWxH): approx. 4,830 x 2,995 x 1,975 mm

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: CNC valdymas, pavaros tipas: hidraulinis, darbinis plotis: 4 000 mm, pjovimo kampas (min.): 0,5 °, pjovimo kampas (maks.): 3 °, eigos dažnis (min.): 12 aps./min, maks. lakšto storis: 10 mm, plieno lakšto storis (maks.): 10 mm, STANDARD FEATURES CNC-controlled, angle-adjustable hydraulic guillotine shear CNC-controlled blade gap adjustment, stroke and cutting angle setting Touchscreen CNC control unit (ELGO P40T) Automatic cutting angle adjustment (based on material type and thickness) Automatic stroke shortening feature (increased speed for short cuts) High-precision, stress-relieved steel frame Hardened guides and roller upper table movement system 1,000 mm CNC-controlled, motorized and programmable backgauge Backgauge features: - Programmable retraction - Lift-up function for long parts - ±0.1 mm positioning accuracy Ball screw sheet feeding front support table Upper blade: double cutting edge / Lower blade: four cutting edge High-alloy steel blades Special joint system reducing maintenance requirements Front support arms with ruler, T-slot and stopper (1,000 mm) Nljdpfx Aox Nqpheg Hef Cutting line illumination and shadow wire Front finger guard (openable type) Front and side safety covers Foot pedal Mobile control lever Emergency stop buttons Safety equipment compliant with CE standards OPTIONAL FEATURES Rear pneumatic sheet support system – Type 1 Rear pneumatic sheet support system – Type 2 (with forward feeding) Angle-adjustable front square arm (0–180°) Front support arms in custom lengths Full-length openable front finger guard cover Front finger safety light curtain Rear safety light barrier (CE compliant) Special blade options Laser cutting line Oil heater or oil cooler Automatic or manual central lubrication system Electrical cabinet cooling system with air conditioning CNC-controlled front sheet support and feeding arms Special throat depth (500 mm) Lightweight guard TECHNICAL SPECIFICATIONS (C 10 / 4000 MODEL) Cutting capacity (450 N/mm²): 10 mm Cutting capacity (700 N/mm²): 6 mm Cutting length: 4,000 mm Cutting angle: 0.5° – 3° (CNC controlled) Cutting stroke: Automatically adjustable Throat depth: 250 mm Backgauge travel distance (X axis): 1,000 mm Cutting speed: 6 – 12 strokes/min Motor power: 22 kW Oil tank capacity: 300 liters Machine weight: ~16 tons Machine dimensions (LxWxH): approx. 5,790 x 3,650 x 2,580 mm

Būklė: naujas, Gamybos metai: 2026, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: hidraulinis, valdiklių gamintojas: ELGO, valdiklio modelis: P40T 5.7”, darbinis plotis: 4 000 mm, pjovimo kampas (min.): 2,1 °, eigos dažnis (min.): 15 aps./min, maks. lakšto storis: 13 mm, plieno lakšto storis (maks.): 13 mm, atgalinio ribotuvo reguliavimas: valdomas CNC, galia: 22 kW (29,91 AG), garantijos trukmė: 12 mėnesiai, Įranga: CE žymėjimas, Tipinė plokštelė prieinama, avarinis stabdymas, dokumentacija / vadovas, kojinis nuotolinio valdymo pultas, pirštų apsauga, Key Advantages ✔ 13 mm sheet cutting capacity (450 N/mm²) ✔ 4000 mm cutting length ✔ ELGO P40T 5.7” touchscreen NC control unit ✔ NC-controlled motorized backgauge system ✔ Program memory ✔ Automatic cutting program ✔ Dual-speed cutting system ✔ Energy-saving standby mode ✔ Rexroth hydraulic system ✔ Premium front and rear cabin guarding system ✔ Transfer table and ball transfer system ✔ Shadow line cutting illumination ✔ Heavy-duty steel construction body Standard Features ELGO P40T 5.7” Touchscreen NC Control Unit 5.7” TFT touchscreen display Manual operation mode Single piece processing mode Program memory Digital outputs up to 2A Automatic calculation of angle, pressure, and blade clearance according to material thickness Automatic cutting program Back sheet support system control RTS (Return To Sender) function Manual Blade Clearance Adjustment System Programmable Backgauge Return System Automatic upper lift for pieces over 1000 mm CRONOSSTECH X Axis Motorized NC Controlled Backgauge System NC-controlled automatic X-axis movement 1000 mm travel distance 150 mm/sec speed ±0.05 mm positioning accuracy Steel construction body Hardened ball screw drive Front Support Arms 1000 mm length Measurement ruler system T-slot design Foldable stop arms Movable Front Finger Guard System 1000 mm opening front guard cover Upper Blade 2 cutting edges 450 N/mm² material capacity Lower Blade 4 cutting edges 450 N/mm² material capacity Foot Pedal Specially designed pedal with emergency stop function Activates pressure cylinders and cutting motion simultaneously Rear Safety System (excluding CE) Model: EOS2E 2BX 2 laser beams Type 2 – SIL1 safety level 510 mm monitoring height 3 ms response time IP65 / IP67 protection class Operating temperature: -30°C / +55°C 24V DC power supply Emergency Stop Buttons Shadow Line for Cutting Reference Ball Transfer Table Electrical Equipment Schneider or Siemens 400V / 50Hz CRONOSSTECH Premium Cabin System Front and rear protective cabins Wide viewing angle Ergonomic operation Professional industrial design Hydraulic System Rexroth hydraulic block Dual-Speed Cutting System Two cutting speeds High efficiency for short pieces High-speed operation up to 60% of max cutting capacity Energy Saving Standby Mode Optional Features Automatic Blade Clearance Adjustment System ELGO P40T touchscreen control integration Automatic blade clearance adjustment according to sheet thickness Pneumatic Sheet Support System Type 1 Dual-position system Extended X Axis Backgauge 1250 mm Njdpozbqw Iefx Ag Hslf 1500 mm Extended Front Support Arms 1500 mm 2000 mm 3000 mm Full-Length Movable Front Guard System Technical Specifications Cutting Capacity (450 N/mm²): 13 mm Cutting Capacity (700 N/mm²): 8 mm Cutting Length: 4000 mm Cutting Angle: 1.8° Number of Pressure Cylinders: 18 Cutting Speed / Fast Mode: 9 / 15 cpm Distance Between Columns: 4310 mm Table Height: 930 mm Table Width: 660 mm Throat Depth: 250 mm Backgauge Travel (X): 1000 mm Machine Length: 5665 mm Machine Width: 3785 mm Machine Height: 2380 mm Hydraulic Oil Tank: 350 litres Motor Power: 22 kW Machine Weight: 18.5 t

Būklė: naujas, Gamybos metai: 2026, valdymo tipas: CNC valdymas, pavaros tipas: hidraulinis, darbinis plotis: 3 100 mm, maks. lakšto storis: 8 mm, garantijos trukmė: 12 mėnesiai, CNC Controlled Hydraulic Guillotine Shear – 3000 x 8 mm With high cutting accuracy, robust frame construction, and CNC-controlled systems, it is the ideal solution for sheet metal workshops and industrial production lines. Delivers high-quality and repeatable cutting performance across various sheet thicknesses. Nlsdpfxjx Rrk No Ag Hsf Standard Features - ELGO P40T Touchscreen NC Control Unit - Rexroth / Hoerbiger hydraulic system - Automatic CNC-controlled blade gap, stroke, and blade angle adjustment - 1,000 mm NC-controlled, programmable, motorized backgauge - 250 mm throat depth - Programmable backgauge retract function - Backgauge lift feature for workpieces over 1,000 mm - Cutting length adjustable from the control panel to increase cycle rate for short cuts - Ball transfer sheet support table - Upper blade with 2 cutting edges / Lower blade with 4 cutting edges - Special linkage system to reduce maintenance needs - 1,000 mm front support arms with ruler, T-slot, and stopper - Front and side safety guards - Cutting line illumination and shadow wire - Front finger guard sheet (1,000 mm openable cover) - Foot pedal - Movable control arm and safety enclosures - Emergency stop buttons Optional Features - Rear pneumatic sheet support system (Type 1) - Rear pneumatic sheet support system, forward delivery (Type 2) - Miter gauge with angle adjustment (0–180º) - Front support arms in desired length - Special throat depth (500 mm) - Full-length openable front finger guard cover - Front finger safety light curtain - Special blade - Laser cutting line - Oil heater or oil cooler - Automatic or manual central lubrication - Air-conditioned electric cabinet cooling - CNC front sheet support arms - CE compliant rear light barrier - Light-duty guard Technical Specifications (3000 x 8 mm) - Cutting length: 3,100 mm - Cutting capacity (450 N/mm²): 8 mm - Cutting capacity (700 N/mm²): 5 mm - Cutting angle: 0.5 – 2.7° - Number of hold-down cylinders: 14 - Cutting speed: 10 / 15 strokes/min - Throat depth: 250 mm - Backgauge travel (X): 1,000 mm - Table length: 3,500 mm - Table width: 900 mm - Main motor power: 15 kW - Oil tank capacity: 275 L - Machine weight: ~7.5 tons Technical specifications may vary depending on requested configuration.

Būklė: naujas, Gamybos metai: 2026, galia: 15 kW (20,39 AG), spaudimo jėga: 150 t, eigos ilgis: 125 mm, stalo plotis: 660 mm, stalo ilgis: 920 mm, gerklės gylis: 320 mm, stūmoklio plokštės plotis: 290 mm, ramplokštės ilgis: 600 mm, bendras ilgis: 1 600 mm, bendras plotis: 2 280 mm, bendras aukštis: 2 750 mm, bendras svoris: 7 100 kg, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CECP 150 | 150 tonų C tipo ekscentrinis presas | Sunkiosios pramonės lakštų pjovimo ir formavimo staklės Patikimo Turkijos preso staklių gamintojo CRONOSSTECH gaminys – 100 % atitinkantis CE standartus 150 tonų C tipo ekscentrinis presas, skirtas storių lakštų pjovimui, gręžimui ir sunkioms šaltoms formavimo operacijoms. Dėl sustiprinto, tvirto plieninio korpuso šios pramoninės sistemos užtikrina minimalų deformavimąsi, maksimalų darbuotojų saugumą ir puikų smūgio tikslumą, todėl puikiai tinka sunkiųjų pramonės serijinei gamybai. Pagrindiniai pranašumai jūsų pramoninei gamybai: Didelis atsparumas ir pakartojamumas: dėl tvirto plieninio konstrukcijos, kuri išlaiko stabilumą esant dideliems smūgiams, užtikrinama puiki detalių kokybė ir ilgas formų tarnavimo laikas. Maksimalus darbuotojų saugumas: dizainas, orientuotas į operatoriaus saugumą, su šviesos barjeru, dvigubu solenoidiniu vožtuvu ir mechaniniu apsauginiu įtaisu. Mažos priežiūros išlaidos: dėl centrinės, visiškai automatinės tepimo sistemos užtikrinamas nepertraukiamas ir be problemų veikimas. Išmanioji valdymo sistema (standartinė): greita receptų valdymo ir paleidimo sistema su pažangia PLC platforma ir standartiniu jutikliniu LCD ekranu. Naudojimo sritys: Storių lakštų pjovimas, gręžimas ir štampavimas. Šaltosios štampavimo ir sunkiųjų metalų formavimo operacijos. Automobilių, buitinės technikos ir sunkiosios pramonės serijinės gamybos linijos. ✅ STANDARTINĖ ĮRANGA Tvirtas plieninis konstrukcijos korpusas. Stovo sistema su guoliais iš 4 pusių. Sferoidinio geležies švaistiklis ir guolių pavaros. 4140 grūdinto plieno velenas ir perdavimo velenai. Pneumatinė sankaba ir stabdžiai. Jutiklinis LCD ekranas ir PLC valdymo sistema. Rankinis reguliuojamas smūgio ilgis ir mechaninis apsauginiu įtaisas. Dviguba rankų/pėdų valdymo sistema. Avarinis atvirkštinio variklio judėjimas. Visiška atitiktis CE standartams ir darbo saugos reglamentams. ✅ PAPILDOMOS FUNKCIJOS Vibravimą slopinančios pramoninės gumos pagalvėlės. Hidraulinė apsaugos sistema. Atsarginė plokštė. Ritininio lakšto atidarytuvo, valdiklio ir tiesinimo įrenginio integravimas. Stovo sistema su 8 guoliais. Individualus formų rinkinio projektavimas ir gamyba pagal projektą. ✅ TECHNINĖS CHARAKTERISTIKOS (150 TONŲ) Talpa: 150 tonų | Variklio galia: 15 kW (1450 aps./min.) | Smūgių skaičius: 42 smūgiai/min. Stalo matmenys: 660 x 920 mm | Stūklio matmenys: 600 x 290 mm. Nljdpfx Agszwt Nwj Hof Aukščio tarpai: 320 mm | Smūgio reguliavimas: 10–125 mm. Stūklio reguliavimas: 120 mm | Stalo skylės skersmuo: Ø220 mm. Atstumas nuo stalo iki stūklio: 500 mm | Atstumas nuo stovo iki stalo: 540 mm. Atstumas tarp sienų: 500 mm | Atstumas nuo žemės iki stalo: 805 mm. Formų tvirtinimo lizdo skersmuo: Ø55 mm. Priekinių / šoninių atramų matmenys: 840 mm / 1300 mm. Išoriniai matmenys (P x G x A): 1600 x 2280 x 2750 mm. Apytikslis svoris: 7100 kg. (Pastaba: jei turite specialių techninių pakeitimų, skirtų jūsų gamybos linijai, prašome pranešti mums.) ✅ GAMINTOJO GARANTIJOS Šios staklės gaminamos Turkijoje pagal CRONOSSTECH inžinerinius standartus. Visus eksporto, paleidimo ir techninės priežiūros procesus visame pasaulyje vykdo mūsų patyrusi komanda.

Būklė: naujas, Gamybos metai: 2026, galia: 4 kW (5,44 AG), spaudimo jėga: 60 t, eigos ilgis: 95 mm, stalo plotis: 520 mm, stalo ilgis: 720 mm, gerklės gylis: 260 mm, stūmoklio plokštės plotis: 340 mm, ramplokštės ilgis: 720 mm, bendras ilgis: 1 340 mm, bendras plotis: 1 450 mm, bendras aukštis: 2 200 mm, bendras svoris: 2 750 kg, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CECP 60 | 60 tonų C tipo ekscentrinis presas | Lakštų pjovimo ir formavimo staklės Patikimas Turkijos preso staklių gamintojas CRONOSSTECH siūlo 100 % CE sertifikuotą 60 tonų C tipo ekscentrinį presą, skirtą lakštų pjovimui, gręžimui ir šaltam formavimui. Tai pramoniniai presų sprendimai, kurie užtikrina minimalią priežiūrą, didžiausią darbo saugumą ir puikų smūgio tikslumą, naudojant didelių apimčių serijinės gamybos linijose. Pagrindiniai pranašumai jūsų pramoninei gamybai: Didelis pakartojamumas: stabilus smūgio našumas serijinės gamybos linijose sumažina atliekų kiekį. Nledezwk Rrjpfx Ag Hjf Didžiausias darbo saugumas: dizainas, orientuotas į operatoriaus saugumą, su šviesos barjeru ir dvigubu solenoidiniu vožtuvu. Mažos priežiūros išlaidos: dėl centrinės automatinės tepimo sistemos užtikrinamas nepertraukiamas ir ilgaamžis veikimas. Greitas paleidimas: PLC valdymo sistema ir dvigubas rankinis/pedalinis valdymas leidžia nedelsiant pradėti gamybą. Naudojimo sritys: Lakštų pjovimo, gręžimo ir štampavimo operacijos Šalto atskyrimo ir metalo formavimo procesai Automobilių, buitinių prietaisų ir susijusių pramonės šakų serijinės gamybos linijos ✅ STANDARTINĖ ĮRANGA Plieninė standi konstrukcija Reguliuojama sistema, remiama iš 4 pusių Sferoidinis ketaus alkūninis velenas ir guoliai 4140 grūdinto plieno velenas ir pavarų ašys Pneumatinė sankaba ir stabdžių derinys Rankiniu būdu reguliuojamas smūgis ir mechaninė apsauga Avarinis atvirkštinis variklio judėjimas ✅ PAPILDOMOS FUNKCIJOS Vibracijos slopintuvai Liemčiamos ekranas (150–300 tonų diapazone – standartinė įranga) Hidraulinė apsaugos sistema (200–300 tonų diapazone – standartinė įranga) Ritininio lakšto atsuktuvo, pavaros ir tiesinimo įrenginio integracija Individualus formos projektavimas ir gamyba pagal užsakymą ✅ TECHNINĖS CHARAKTERISTIKOS (60 TONŲ) Talpa: 60 tonų | Variklio galia: 4 kW | Smūgių skaičius: 50 smūgių/min. Stalo matmenys: 520 × 720 mm | Stūklio matmenys: 340 × 220 mm Atsižvilgių gylis: 260 mm | Smūgio reguliavimas: 0–95 mm Stūklio reguliavimas: 70 mm | Stalo skylės skersmuo: Ø150 mm Atstumas nuo stalo iki stūklio: 360 mm | Atstumas nuo slidės iki stalo: 395 mm Išoriniai matmenys (P x G x A): 1340 x 1450 x 2200 mm Apytikslis svoris: 2750 kg (Pastaba: jei turite specialių reikalavimų dėl smūgio, stalo dydžio ar techninių pakeitimų jūsų gamybos linijai, prašome susisiekti.) ✅ GAMINTOJO GARANTIJA Ši staklė yra pagaminta Turkijoje, naudojant CRONOSSTECH inžinerinius sprendimus. Eksporto operacijos, įrengimas ir visa techninė pagalba po pardavimo teikiama tiesiogiai mūsų pačių kvalifikuotų specialistų komandų, pagal tarptautinius standartus.

Būklė: naujas, Gamybos metai: 2026, galia: 7,5 kW (10,20 AG), spaudimo jėga: 80 t, eigos ilgis: 100 mm, stalo plotis: 540 mm, stalo ilgis: 740 mm, gerklės gylis: 280 mm, stūmoklio plokštės plotis: 370 mm, bendras ilgis: 1 400 mm, bendras plotis: 1 735 mm, bendras aukštis: 2 220 mm, bendras svoris: 4 000 kg, Įranga: CE žymėjimas, apsaugos šviesos užtvara, CRONOSSTECH CECP 80 | 80 tonų C tipo ekscentrinis presas | Lakštų pjovimo ir formavimo staklės CRONOSSTECH – patikimas Turkijos presų gamintojas – siūlo 100 % CE sertifikuotą 80 tonų C tipo ekscentrinį presą, skirtą lakštų pjovimo, gręžimo ir šaltojo formavimo operacijoms. Tai pramoniniai presų sprendimai, užtikrinantys minimalią priežiūrą, maksimalų darbo saugumą ir puikų eigos tikslumą jūsų didelio našumo serijinės gamybos linijose. Pagrindiniai pranašumai jūsų pramoninei gamybai: Didelis pakartojamumas: stabili eiga serijinėje gamyboje užtikrina puikią dalių kokybę ir minimalius nuostolius. Maksimalus darbo saugumas: dizainas orientuotas į operatoriaus saugumą, su šviesos barjeru, dvigubu solenoidiniu vožtuvu ir mechaniniu apsauginiu įtaisu. Mažos priežiūros išlaidos: dėl centrinės visiškai automatinės tepimo sistemos užtikrinamas nepertraukiamas, sklandus ir ilgaamžis veikimas. Greitas paleidimas: pažangios PLC valdymo sistemos ir dvigubo valdymo (rankiniu arba pedalu) dėka galima nedelsiant pradėti gamybą. Naudojimo sritys: Nljdpjzwk S Njfx Ag Hsf Lakštų pjovimo, gręžimo ir štampavimo operacijos Šaltasis pjovimas ir metalo formavimo operacijos Automobilių, buitinių prietaisų ir susijusių pramonės šakų serijinės gamybos linijos ✅ STANDARTINĖ ĮRANGA Plieninis tvirtas korpusas 4 guolių sistema Sferoidinis ketaus jungiamasis strypas ir guoliai 4140 plieno, terminio apdorojimo būdu apdorotas, velenas ir perdavimo velenas Pneumatinė sankaba ir stabdžiai Rankiniu būdu reguliuojama eiga Avarinis atvirkštinis variklio judesys Pilnas atitikimas CE standartams ir darbo saugos reglamentams ✅ PAPILDOMOS FUNKCIJOS Vibraciją mažinantys pramoniniai pagrindai Liemtinio LCD ekranas (standartinis 150–300 tonų diapazone) Hidraulinė apsauginė sistema (standartinė 200–300 tonų diapazone) Atsarginė plokštė Lakštų ritinių išlyginimo, padavimo ir tiesinimo integracija 8 guolių slydimo sistema Specialios formos, pritaikytos projekto reikalavimams ✅ TECHNINĖS SPECIFIKACIJOS (80 TONŲ) Talpa: 80 tonų | Variklio galia: 7,5 kW (1450 aps./min.) | Eigos skaičius: 45–75 eiga/min. Plokštės matmenys: 540×740 mm | Stūklio matmenys: 370×230 mm Atsivaro gylis: 280 mm | Eigos reguliavimas: 10–100 mm Stūklio reguliavimas: 85 mm | Plokštės skylių skersmuo: Ø190 mm Atstumas nuo stalo iki stūklio: 400 mm | Atstumas nuo slydimo bėgelio iki stalo: 420 mm Atstumas tarp sienelių: 400 mm | Atstumas nuo žemės iki stalo: 755 mm Formos tvirtinimo lizdo skersmuo: Ø40 mm Priekinių / šoninių kotų matmenys: 670 mm / 1040 mm Išoriniai matmenys (P x G x A): 1400 x 1735 x 2220 mm Apytikslis svoris: 4000 kg (Pastaba: jei turite specialių techninių modifikacijų užklausų jūsų gamybos linijai, prašome pranešti mums.) ✅ GAMINTOJO GARANTIJOS Šios staklės yra pagamintos Turkijoje, naudojant CRONOSSTECH inžinerinius sprendimus. Visus eksporto, paleidimo ir techninės priežiūros procesus visame pasaulyje vykdo mūsų specialistų komanda.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2026, galia: 3 kW (4,08 AG), spaudimo jėga: 30 t, eigos ilgis: 150 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 70 mm/s, gerklės gylis: 255 mm, ramplokštės ilgis: 1 270 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, Standard Equipment Stroke: 150 mm Daylight (Lower – Upper Beam Opening): 265 mm Throat Depth: 255 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Machine Features - Dual-cylinder upper beam bending system - Steel body construction ensures high static and dynamic rigidity - Upper beam movement supported by fiber slide bearings - High-strength balance shaft and eccentric bearing system supporting parallelism - Motor-controlled angle adjustment with mechanical stroke system inside cylinder - Wide opening and high stroke suitable for use with various dies - Easy tonnage adjustment and bottom dead center stop via NC control - Hydraulic safety system against overpressure - Dual speed operation for fast approach, bending, and return - CE-compliant multifunctional foot pedal with emergency stop - Compact top-mounted hydraulic power unit with HAWE or Rexroth components - Electrical equipment from Siemens, Pizzato, and Balluff - LEUZE safety system and teaching mode - NC controller with memory for 500 programs and 200 steps per program - Program transfer via USB port - Standard upper and lower tool set - Motorized X-axis backgauge with NC control (500 mm) - Linear guide backgauge system - 0.2 mm positioning accuracy - Motorized Y-axis angle adjustment - Movable control panel - Linear-guided front support arms - Lower die centering bolts - Programmable precision backgauge return function Optional Equipment - Motorized R-axis - Special bending tools - Custom pedal system with dual hand + foot control - DSP or Fiessler safety systems - Extended backgauge travel - Additional backgauge fingers - Additional front support arm Nlsdpfszcl S Nsx Ag Hjf - Manual crowning system - Motorized crowning system Technical Specifications Bending Force: 30 Ton Max. Bending Capacity: 4 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Stroke: 150 mm Bending Speed: 10 mm/sec Fast Approach Speed: 70 mm/sec Throat Depth: 255 mm Daylight: 265 mm Table Width: 130 mm Table Height: 830 mm Main Motor Power: 3 kW X-axis Motor: 0.55 kW Y-axis Motor: 0.18 kW Optional R-axis Motor: 0.25 kW Backgauge Travel: 500 mm Oil Tank Capacity: 90 L Machine Length: 1780 mm Machine Width: 1375 mm Machine Height: 2160 mm Machine Weight: 1700 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Būklė: naujas, Gamybos metai: 2026, galia: 7,5 kW (10,20 AG), spaudimo jėga: 60 t, eigos ilgis: 160 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 90 mm/s, gerklės gylis: 320 mm, ramplokštės ilgis: 2 100 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, Standard Equipment Stroke: 160 mm Daylight (Lower – Upper Die Opening): 380 mm Throat Depth: 320 mm Bending Length: 2100 mm Distance Between Columns: 1700 mm Machine Features - Dual-cylinder upper beam bending system - Steel frame and upper beam construction providing high static and dynamic rigidity - Upper beam movement supported by fiber slide bearings - High-strength balancing shaft and eccentric bearing system for parallelism - Motor-controlled angle adjustment with mechanical stroke system inside the cylinder - Large working opening suitable for use with various dies - Ton capacity adjustment and bottom dead point setting via NC control unit - Hydraulic safety system against overpressure - Double-speed operation: rapid approach, bending, and fast return - CE-compliant multifunctional foot pedal and emergency stop system - Compact hydraulic power unit with HAWE or Rexroth components - Remote service support with Siemens, Pizzato, and Balluff electrical equipment - LEUZE safety system and learning mode - NC control unit with 500 program storage and 200 lines per program - Easy program upload and download via USB - Standard punch and die set - NC-controlled motorized X-axis back gauge (600 mm) - Programmable back gauge system with linear guides - 0.2 mm positioning accuracy - Motorized Y-axis angle adjustment - Movable control panel - Linear guided front support arms - Lower die centering and locking bolts - Programmable precise back gauge retract function Optional Equipment - Motorized R-axis - Special bending dies - Special dual-hand and foot-operated pedal system - DSP or FIESSLER safety systems - Extended back gauge travel - Additional back gauge fingers - Extra front support arm - Manual crowning system - Motorized crowning system Technical Specifications Bending Force: 60 Tons Maximum Bending Capacity: 4 mm Bending Length: 2100 mm Distance Between Columns: 1700 mm Stroke: 160 mm Nsdpfezcmbfjx Ag Helf Bending Speed: 10 mm/sec Approach Speed: 90 mm/sec Throat Depth: 320 mm Daylight: 380 mm Table Width: 100 mm Table Height: 845 mm Main Motor Power: 7.5 kW X-Axis Motor: 0.75 kW Y-Axis Motor: 0.37 kW Optional R-Axis Motor: 0.25 kW Back Gauge Travel: 600 mm Oil Tank Capacity: 120 L Machine Length: 2450 mm Machine Width: 1600 mm Machine Height: 2235 mm Machine Weight: 4340 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Būklė: naujas, Gamybos metai: 2026, galia: 5,5 kW (7,48 AG), spaudimo jėga: 40 t, eigos ilgis: 160 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 90 mm/s, gerklės gylis: 320 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, HPB NC 40-1550 – 40 x 1550mm Ton NC Hydraulic Press Brake The HPB NC 40-1550 Hydraulic Press Brake, manufactured by CRONOSSTECH in Turkey, has been designed for precise sheet metal bending applications with a bending force of 40 tons and a bending length of 1550 mm. Thanks to its compact design, NC-controlled axes, high-rigidity steel frame, and user-friendly control system, it offers an efficient solution for workshops, metalworking businesses, and industrial producers. Standard Features Stroke: 160 mm Daylight Opening: 380 mm Throat Depth: 320 mm Bending Length: 1550 mm Distance Between Columns: 1260 mm Double-cylinder upper beam structure Steel frame and upper beam providing high static and dynamic rigidity Upper beam system with adjustable fiber slide support High-strength balancing shaft and eccentric bearing system supporting parallelism Motor-controlled angle adjustment via mechanical stroke system inside cylinders Large stroke and daylight opening suitable for various tool use Easy tonnage and bottom dead center adjustments via NC control Hydraulic safety system for overpressure protection Dual speed operation (free descent, bending, fast return) Multifunctional foot pedal with emergency stop compliant with CE standards Top-mounted hydraulic power unit with HAWE or REXROTH components Nsdpfozbq U Hox Ag Holf Electrical equipment from SIEMENS, PIZZATO, and BALLUFF LEUZE safety system and learning mode NC control unit with memory for 500 programs and 200 steps per program USB data upload and backup feature Standard upper and lower tool set NC-controlled motorized X-axis backgauge system 500 mm travel distance 0.2 mm positioning accuracy Motorized Y-axis angle adjustment Movable control panel Front support arms with linear guides Lower die centering and clamping screws Programmable precision anti-backlash function Optional Features Motorized R-axis Special bending tools and dies Custom pedal system with dual hand + foot control DSP or FIESSLER safety systems Extended backgauge system Additional backgauge fingers Additional front support arm Manual crowning system Motorized crowning system Technical Specifications Bending Force: 40 Ton Bending Capacity*: 4 mm Working Length: 1550 mm Distance Between Columns: 1260 mm Stroke: 160 mm Bending Speed: 10 mm/sec Rapid Descent Speed: 90 mm/sec Throat Depth: 320 mm Daylight Opening: 380 mm Table Width: 100 mm Lower Table Height: 845 mm Main Motor Power: 5.5 kW X Axis Motor Power: 0.75 kW Y Axis Motor Power: 0.37 kW R Axis Motor Power (Optional): 0.25 kW Backgauge Travel: 600 mm Oil Tank Capacity: 120 L Machine Length: 2000 mm Machine Width: 1600 mm Machine Height: 2235 mm Machine Weight: 3450 kg This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Būklė: naudotas, Gamybos metai: 2007, bendras ilgis: 5 810 mm, bendras plotis: 1 980 mm, bendras aukštis: 1 540 mm, Spalva: mėlyna Svoris be apkrovos: 11 500 kg Kaina: pagal užklausą Nedpszwukpjfx Ag Holf - Pagaminimo metai: 2007 m. - Dokumentacija: nėra - CE žymėjimas: yra - CE sertifikatas: nėra - Serijos numeris: 600007090 - Valdymas: įprastinis - Pavara: hidraulinė - Ritinių skaičius [vnt.]: 4 - Varomų ritinių skaičius [vnt.]: 2 - Galia [kW]: 15,0 - Maksimalus skardos storis [mm]: 13 - Maksimalus išankstinio lenkimo storis [mm]: 10 - Maksimalus darbinis plotis [mm]: 3100 - Viršutinio ritinio skersmuo [mm]: 280 - Apatinių ritinių skersmuo [mm]: 280 - Lenkimo greitis [mm/min]: 5000 - Papildomos funkcijos: kūginis lenkimas, skaitmeninis ekranas - Transportavimo matmenys: 5815 mm x 1985 mm x 1540 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 11 500 kg - Transportavimo pakuočių skaičius [vnt.]: 2 Finansinė informacija PVM: nurodyta kaina yra be PVM PVM / diferencinis apmokestinimas: PVM galima atskaityti įmonėms Pristatymas ir senos įrangos atpirkimas galimas bet kuriuo metu, visai pramonės įrangai Lukasas van Rossumas

Būklė: naujas, Gamybos metai: 2026, galia: 15 kW (20,39 AG), spaudimo jėga: 175 t, eigos ilgis: 260 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 130 mm/s, gerklės gylis: 410 mm, ramplokštės ilgis: 3 700 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, HPB B175-3700 – 175 Ton x 3700 mm CNC Hydraulic Press Brake The HPB B175-3700 CNC Hydraulic Press Brake, manufactured by CRONOSSTECH in Turkey, is engineered for precise and repeatable sheet metal bending operations, offering a bending capacity of 175 tons and a bending length of 3700 mm. Standard Features - Stroke: 260 mm - Daylight (Open Height): 465 mm - Throat Depth: 410 mm - Bending Length: 3700 mm - Distance Between Frames: 3200 mm - ESA S830 CNC Control Unit - 10” 2D touchscreen display - Manual bend sequencing and collision control - Automatic crowning calculation - Angle measurement and correction - 2D drawing function - 2 USB ports - Offline software - CT-BEND Servo Motorized Backgauge - X axis: 750 mm - Speed: 250 mm/s - Accuracy: ±0.05 mm - R axis: 250 mm - Hardened ballscrew - Linear guide system - Optional X axis: 1000 mm Tooling System - 2 backgauge fingers - European type Promecam quick-release die clamping system - CRONOSSTECH special narrow lower table - Eurostamp ES1260 upper tool - Eurostamp ES2067 lower tool - Amada-compatible tooling system Standard Equipment - B Series open-frame cabin design - GIVI linear encoders - LED lighting - VDE electrical panel - Schneider or Siemens electrical components - HAWE hydraulic block - Eckerle pump - Siemens drive - Single pedal system - Energy-saving standby function - 2 adjustable front support arms Optional Features - CT-BEND X+R servo backgauge - AKAS II laser front safety system - PLC safety module - Rear light curtains - Delem DA53Tx CNC control unit - CNC-controlled motorized crowning system - X-axis 1000 mm extension Technical Specifications - Bending Force: 175 Ton - Bending Length: 3700 mm - Distance Between Frames: 3200 mm - Stroke: 260 mm - Daylight (Open Height): 465 mm - Throat Depth: 410 mm Nedezb Inkspfx Ag Hslf - Table Height: 955 mm - Machine Length: 5300 mm - Machine Width: 2430 mm - Machine Height: 2990 mm - Approach Speed: 180 mm/s - Return Speed: 130 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 180 L - Weight: 10,500 kg - Main Motor: 15 kW - X-axis Speed: 300 mm/s - R-axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. Country of origin: Turkey. 🇹🇷

Būklė: naujas, Gamybos metai: 2026, galia: 7,5 kW (10,20 AG), spaudimo jėga: 100 t, eigos ilgis: 260 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 135 mm/s, gerklės gylis: 410 mm, ramplokštės ilgis: 2 600 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, HPB B100-2600 – 100 Ton x 2600 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Open Height (Daylight): 465 mm Throat Depth: 410 mm Bending Length: 2600 mm Distance Between Frames: 2150 mm ESA S830 CNC Control Unit (3-4 Axis) 10” 2D Touch Graphic Display Manual bending sequence and collision detection Angle correction calculation (crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Backgauge System X-axis travel: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis travel: 250 mm Heavy-duty welded steel frame Hardened ball screw Hardened linear guide system Optional 1000 mm X-axis travel Backgauge Fingers 2 units Flat type 3 position (10 mm / 20 mm / 30 mm) Manual Z-axis movement Sheet sag prevention construction European Style Quick Tool Clamping System (Promecam E7) Fast tool change Safe operation User-friendly and time-saving design CRONOSSTECH Special Narrow Bottom Table 70 mm or 90 mm bottom table T-slot can be machined depending on tooling requirement Standard Top Punch ES1260 Punch height: 67 mm Punch angle: 85° Radius: 0.8 mm Material: C45 Max. capacity: 100 Ton/Meter Compatible with Amada Standard Bottom Die ES2067 4-V opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Max. capacity: 80 Ton/Meter Compatible with Amada B Series Open Frame Design Nedezbyt Sspfx Ag Holf Black plexiglass protective panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting VDE standard electrical panel Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic manifold Eckerle hydraulic pump Siemens drive Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Integrated scale measurement system Operator assistance Optional Features CT-BEND Servo Motorized X + R Axis Backgauge System Servo motor X and R axis movement X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis extendable up to 1000 mm CNC Controlled Motorized Crowning System MVD wedge and G.E.C. motorized system Auto-calculation by CNC Faster setup time Higher bending accuracy Longer machine lifespan AKAS (FPSC) Front Safety Laser System + Rear Light Curtain Laser-based finger protection system Enhanced operator safety Fast detection and response CE compliant Max. working distance: 4.3 meters Technical Specifications Bending Force: 100 Ton Bending Length: 2600 mm Distance Between Frames: 2150 mm Stroke: 260 mm Open Height (Daylight): 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 4220 mm Machine Width: 2230 mm Machine Height: 2950 mm Approach Speed: 200 mm/s Working Speed: 10 mm/s Return Speed: 135 mm/s Oil Tank Capacity: 170 L Weight: 6430 kg Main Motor Power: 7.5 kW Backgauge X-axis Speed: 300 mm/s Backgauge R-axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Būklė: naujas, Gamybos metai: 2026, galia: 22 kW (29,91 AG), spaudimo jėga: 220 t, eigos ilgis: 260 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 110 mm/s, gerklės gylis: 410 mm, ramplokštės ilgis: 6 100 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, HPB B220-6100 – 220 Ton x 6100 mm CNC Hydraulic Press Brake The HPB B220-6100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, has been developed for precise, powerful, and repeatable bending of long sheet metal parts with a bending force of 220 tons and a bending length of 6100 mm. It is suitable for heavy industry, steel construction, energy, machinery manufacturing, and metalworking applications. The machine offers high efficiency thanks to its ESA S630 CNC control unit, servo-driven motorized backgauge system, European-style tooling clamp system, rigid frame construction, and professional equipment. Standard Features Stroke: 260 mm Nlsdszbyvtepfx Ag Hof Open Height: 465 mm Throat Depth: 410 mm Bending Length: 6100 mm Distance Between Columns: 5100 mm ESA S630 CNC Control Unit 10” 2D touchscreen graphic display Manual bending sequence and collision avoidance calculation Angle correction function Angle measurement and adjustment 2D drawing capability 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Backgauge X-axis travel: 750 mm X-axis speed: 250 mm/sec Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame Hardened ball screw Hardened linear guides Optional X-axis travel: up to 1000 mm Tooling and Backgauge System 2 straight type, 3-stage backgauge fingers Manual Z-axis movement European-style quick-change Promecam upper tool holder CRONOSSTECH special narrow lower table Standard upper punch ES1260, H: 67 mm, 85°, R: 0.8 mm Standard lower die ES2067, 60 x 60 mm, V: 16-22-35-50 mm Amada-compatible tooling system Other Standard Equipment B series open-frame design Black plexiglass safety panels Single pedal operation GIVI linear scales Upper beam LED lighting VDE standard electrical panel Schneider or Siemens electrical components Hoerbiger / HAWE hydraulic block Eckerle pump Siemens drive Energy-saving standby function 2 standard sliding front support arms Optional Features AKAS II front safety laser system + PLC + rear light barriers Delem DA53Tx 15” CNC control unit Delem DA58Tx 18.5” CNC control unit CNC-controlled motorized crowning system Extended X-axis travel up to 1000 mm Additional front support arms Extra backgauge fingers Special bending tools Technical Specifications Bending Force: 220 tons Bending Length: 6100 mm Distance Between Columns: 5100 mm Stroke: 260 mm Open Height: 465 mm Throat Depth: 410 mm Table Height: 1060 mm Machine Length: 7560 mm Machine Width: 2570 mm Machine Height: 3440 mm Approach Speed: 150 mm/sec Return Speed: 110 mm/sec Bending Speed: 10 mm/sec Oil Tank Capacity: 290 L Machine Weight: 20,000 kg Main Motor Power: 22 kW Backgauge X-axis speed: 300 mm/sec Backgauge R-axis speed: 250 mm/sec This machine is manufactured in Turkey by CRONOSSTECH. Country of origin: Turkey.

Būklė: naujas, Gamybos metai: 2026, galia: 4 kW (5,44 AG), spaudimo jėga: 60 t, eigos ilgis: 210 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 120 mm/s, gerklės gylis: 410 mm, ramplokštės ilgis: 1 250 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, HPB A60-1250 – 60 Ton x 1250 mm CNC Hydraulic Press Brake Manufactured in Turkey by CRONOSSTECH, the HPB A60-1250 CNC Hydraulic Press Brake is designed for precise sheet metal bending applications, offering 60 tons of pressing force and a 1250 mm bending length. With the ESA S630 CNC control unit, servo motorized backgauge system, compact frame construction, and professional tooling package, this machine ensures high precision and productivity for workshops, metalworking companies, and industrial manufacturers. Standard Features Stroke: 210 mm Daylight (Open Height): 415 mm Throat Depth: 410 mm Bending Length: 1250 mm Distance Between Columns: 1100 mm ESA S630 CNC Control Unit (3–4 Axis) 10” 2D touchscreen graphical interface Manual bend sequencing and collision check calculation Crowning and angle correction calculation Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Backgauge System X-axis travel: 750 mm Speed: 130 mm/s Accuracy: ±0.10 mm Manual R-axis travel: 190 mm Steel frame structure Hardened ball screw Hardened linear guide system Optional: 1000 mm X-axis travel Backgauge Fingers 2 pieces Flat type 3-stage depth (10 mm / 20 mm / 30 mm) Manual Z-axis movement Deflection preventive design for sheet support European Style Manual Promecam Upper Tool Holder E7 Quick tool change Safe operation Tool fall prevention design CRONOSSTECH Special Narrow Lower Table Available in 70 mm or 90 mm width T-slot can be implemented on request Standard Upper Tool ES1260 Tool height: 67 mm Tool angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Compatible with Amada Standard Lower Tool ES2067 4-way V-opening (16-22-35-50 mm) Tool height: 60 mm Tool angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Compatible with Amada A-Series Open Frame Design CRONOSSTECH Premium open cabinet Wide field of view Ergonomic design Professional appearance Additional Equipment Single pedal system (P2) GIVI linear scales Nledpfx Agjzbyu Ne Hjf Top beam LED lighting Electrical panel in accordance with VDE standards Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Ruler measurement system Provides operator assistance Optional Features AKAS II Front Safety Laser System + PLC + Rear Light Barriers Finger protection system Laser-based safety system Enhances operator safety CE conformity Maximum working distance: 4.3 metres Technical Specifications Pressing Force: 60 Ton Bending Length: 1250 mm Distance Between Columns: 1100 mm Stroke: 210 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 3060 mm Machine Width: 2195 mm Machine Height: 2730 mm Approach Speed: 150 mm/s Return Speed: 120 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 95 L Machine Weight: 3400 kg Main Motor Power: 4 kW Backgauge X Axis Speed: 300 mm/s Backgauge R Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Būklė: naujas, Gamybos metai: 2026, galia: 15 kW (20,39 AG), spaudimo jėga: 100 t, eigos ilgis: 600 mm, stalo plotis: 650 mm, stalo ilgis: 850 mm, gerklės gylis: 300 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, 100 Ton C-Frame Hydraulic Press – CHCP 100 – New / 24-Month Warranty Hydraulic presses are industrial machines that offer high force and precision in metal forming, deep drawing, cutting, and assembly operations. The CHCP 100 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is designed for heavy-duty production applications, featuring high tonnage capacity, robust frame construction, and precise operational capabilities. Nljdpfx Ajyzb Dyog Hjf Key Advantages - Rigid, vibration-free steel frame construction - High precision (≤120 microns/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long lifespan and low maintenance cost Applications - Metal forming - Deep drawing and stamping operations - Cutting and punching operations - Assembly and pressing operations - Automotive and ancillary industries Standard Features - Stress-relieved steel frame construction by vibration method - PLC control with touch panel - Argon welding applications - Welding certified to EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and squareness in accordance with ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 100 - Press Force: 100 Ton - Stroke: 600 mm - Throat Depth: 300 mm - Table – Ram Distance: 700 mm - Table Size: 650 x 850 mm - Press Depth: 1300 mm - Press Width: 650 mm - Table Height from Floor: 900 mm - Total Height: 2700 mm - Main Cylinder Diameter: Ø220 mm - Motor Power: 15 kW - Weight: 8500 kg General Information - Country of Manufacture: Turkey - Warranty: 24 Months - Condition: Brand new and unused This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2026, galia: 15 kW (20,39 AG), spaudimo jėga: 80 t, eigos ilgis: 600 mm, stalo plotis: 600 mm, stalo ilgis: 800 mm, gerklės gylis: 300 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, 80 Ton C-Frame Hydraulic Press – CHCP 80 – New / 24-Month Warranty Hydraulic presses are industrial machines that deliver high force and precision for metal forming, drawing, cutting, and assembly applications. The CHCP 80 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, ensures reliable performance in medium and heavy-duty applications with its robust frame, high capacity, and precision operation. Key Advantages - Rigid, vibration-free steel construction frame - High precision (≤120 micron/meter) - User-friendly PLC-controlled system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life and low maintenance cost Areas of Application Nsdpfxeyzb Dts Ag Helf - Metal forming - Deep drawing and forming processes - Cutting and punching operations - Assembly and pressing processes - Automotive and related industries Standard Features - Stress-relieved steel frame by vibration method - PLC control and touch panel - Argon welding applications - Welds certified to EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and perpendicularity tolerance compliant with ISO & DIN standards (≤ 120 micron/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 80 - Pressing Force: 80 Ton - Stroke: 600 mm - Throat Depth: 300 mm - Table – Ram Distance: 700 mm - Table Size: 600 x 800 mm - Press Depth: 1200 mm - Press Width: 600 mm - Table Height from Floor: 900 mm - Total Height: 2600 mm - Main Cylinder Diameter: Ø200 mm - Motor Power: 15 kW - Weight: 6500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2026, galia: 5,5 kW (7,48 AG), spaudimo jėga: 40 t, eigos ilgis: 500 mm, stalo plotis: 500 mm, stalo ilgis: 600 mm, gerklės gylis: 250 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, 40 Ton C-Frame Hydraulic Press – CHCP 40 – New / 24 Months Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, deep drawing, cutting, and assembly processes. The CRONOSSTECH CHCP 40 C-Frame Hydraulic Press delivers reliable performance in both workshops and production lines, thanks to its compact design, robust frame, and precise operation capabilities. Key Advantages - Rigid, vibration-free frame construction - High precision (≤120 microns/meter) - PLC-controlled user-friendly system - Hydraulic and electrical components to European standards - Long service life and low maintenance cost Applications - Metal forming - Deep drawing and flanging - Cutting and punching operations - Assembly and pressing tasks - Automotive and related industries Standard Features - Stress-relieved steel frame via vibration method - PLC control with touchscreen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerance according to ISO & DIN standards (≤120 microns/meter) - PARKER or REXROTH hydraulic system Nlodoyzb Dgjpfx Ag Hsf - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Dual hand control system - Cooling system Technical Specifications – CHCP 40 - Pressing Force: 40 Ton - Stroke: 500 mm - Throat Depth: 250 mm - Table – Ram Distance: 600 mm - Table Size: 500 x 600 mm - Press Depth: 1050 mm - Press Width: 500 mm - Table Height from Floor: 850 mm - Total Height: 2400 mm - Main Cylinder Diameter: Ø145 mm - Motor Power: 5.5 kW - Weight: 4500 kg General Information - Country of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured in Turkey by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2026, galia: 22 kW (29,91 AG), spaudimo jėga: 200 t, eigos ilgis: 800 mm, stalo plotis: 750 mm, stalo ilgis: 1 000 mm, gerklės gylis: 400 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, 200 Ton C-Frame Hydraulic Press – CHCP 200 – New / 24-Month Warranty Hydraulic presses are industrial machines delivering high force and precision for metal forming, deep drawing, cutting, and assembly applications. The CHCP 200 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is designed for demanding production environments with its high tonnage capacity, reinforced heavy-duty body, and superior performance. Key Advantages - Heavy-duty, high-strength steel construction frame - Stable operation with vibration-free design - High precision (≤120 micron/metre) - User-friendly PLC controlled system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life and low maintenance cost Areas of Application - Heavy-duty metal forming - Deep drawing and sheet metal forming operations - High-tonnage die pressing - Cutting and punching operations - Automotive, defense, and heavy industry Nodpfx Agsyzb Ede Helf Standard Features - Stress-relieved, welded steel frame - PLC control with touch panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances in accordance with ISO & DIN standards (≤ 120 micron/metre) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 200 Press Force: 200 Tons Stroke: 800 mm Throat Depth: 400 mm Table – Ram Distance: 900 mm Table Size: 750 x 1000 mm Press Depth: 1500 mm Press Width: 750 mm Table Height from Floor: 1000 mm Total Height: 2900 mm Main Cylinder Diameter: Ø300 mm Motor Power: 22 kW Weight: 11,500 kg General Information Place of Manufacture: Turkey Warranty: 24 Months Condition: New and Unused This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2026, galia: 18,5 kW (25,15 AG), spaudimo jėga: 150 t, eigos ilgis: 700 mm, stalo plotis: 700 mm, stalo ilgis: 1 000 mm, gerklės gylis: 350 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, 150 Ton C-Frame Hydraulic Press – CHCP 150 – New / 24 Months Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, drawing, cutting, and assembly operations. The CHCP 150 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is designed for heavy industry and continuous production applications, featuring high tonnage capacity, reinforced frame structure, and precise operating performance. Nsdpfx Agoyzb D Hj Hslf Key Advantages - High-strength, vibration-free steel construction frame - High precision (≤120 microns/meter) - User-friendly PLC-controlled system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Heavy-duty, industrial-grade design - Long service life and low maintenance costs Applications - Heavy-duty metal forming - Deep drawing and forming operations - Die pressing applications - Cutting and punching operations - Automotive and auxiliary industries Standard Features - Stress-relieved, steel weldment frame using vibration method - PLC control and touch panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerance in accordance with ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 150 - Press Capacity: 150 Ton - Stroke: 700 mm - Throat Depth: 350 mm - Table – Ram Clearance: 800 mm - Table Size: 700 x 1000 mm - Press Depth: 1400 mm - Press Width: 700 mm - Table Height from Ground: 950 mm - Overall Height: 2800 mm - Main Cylinder Diameter: Ø250 mm - Motor Power: 18.5 kW - Weight: 10,500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 Months - Condition: Brand new, unused This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2026, galia: 7,5 kW (10,20 AG), spaudimo jėga: 60 t, eigos ilgis: 500 mm, stalo plotis: 600 mm, stalo ilgis: 800 mm, gerklės gylis: 250 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, 60 Ton C-Frame Hydraulic Press – CHCP 60 – New / 24 Months Warranty Hydraulic presses are industrial machines that deliver high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 60 C-Frame Hydraulic Press manufactured by CRONOSSTECH provides reliable and stable performance for both workshops and production lines, thanks to its compact structure, robust frame, and precise operational capabilities. Key Advantages: - Rigid, vibration-free frame construction Nledpjyzb Dmefx Ag Hef - High precision (≤120 microns/metre) - User-friendly PLC controlled system - Hydraulic and electrical components compliant with European standards - Long service life and low maintenance costs Applications: - Metal forming - Deep drawing and forming operations - Cutting and punching operations - Assembly and pressing processes - Automotive and sub-industry sectors Standard Features: - Stress-relieved welded steel construction by vibration method - PLC control with touch panel - Argon welding applications - Certified welding to EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and perpendicularity tolerance according to ISO & DIN standards (≤120 microns/m) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical equipment - Automatic central lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 60: Pressing Force: 60 Ton Stroke: 500 mm Throat Depth: 250 mm Table–Ram Distance: 600 mm Table Size: 600 x 800 mm Press Depth: 1150 mm Press Width: 500 mm Table Height from Floor: 850 mm Total Height: 2500 mm Main Cylinder Diameter: Ø175 mm Motor Power: 7.5 kW Weight: 5500 kg General Information Country of Origin: Turkey Warranty: 24 Months Condition: Brand new and unused This machine is manufactured by CRONOSSTECH in Turkey.