Cevisa Chp-60G Inv pirkti naudotą (616)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6125, Wir verkaufen eine gebrauchte CEVISA Anfasmaschine CHP-60G INV, Baujahr 2024, Seriennummer: 6125 - Fasenlänge: 60 mm - Leistungsfähigkeit in einem Durchgang: 28 mm Fasenlänge - Fasenausführung: spanend (Fräskopf) - Stufenlos einstellbare Fasengeschwindigkeit je nach Material - Optimale Anfasgeschwindigkeit: 500 mm/min - Kontinuierliches Plattenpressdrucksystem: 4 bar - 3 Vorschubrollen permanent im Kontakt mit dem Werkstück - 1 Rolle am Trennpunkt positioniert für: - vibrationsfreien Betrieb - geräuscharmen Ablauf - gleichmäßiges, hochwertiges Fräsergebnis - Tragbare Fräsmaschine; mobil und stabil - Arbeitshöhe mit pneumatischem Hubsystem einstellbar - Elektronische Faseneinstellung Lhodov Ef Ryspfx Ah Usg - Präzisionsanzeige - Verstellbare Fasenwinkel: 15º bis 70º - Nennblechdicke: 10 bis 100 mm Antrieb: Drehstrommotor; Motorleistung: 5 PS (3,8 kW); Spannung: 220/380 V bei 50 Hz, 250/440 V bei 60 Hz; 32-A-Stecker; Kabeldurchmesser: 2,5 mm; max. Maschinenstromaufnahme: 15 A Elektrik: Schaltschrank mit thermomagnetischem Schutzschalter und Not-Aus-Taster, Spannungsauslösung, magnetothermischem Schutz Eigengewicht: 800 kg Arbeitshöhe: 760 – 940 mm, einstellbar Eingebautes Fahrwerk Kantentypen: K-, V-, X- und Y-Fasen Fasengeschwindigkeit: 0,5 m/min Drehstrommotor: 3 Phasen + Schutzleiter, kein Neutralleiter Motorleistung: 5 PS (3,8 kW) Luftdurchsatz: 200 l/min Preis: 37.000 EUR zzgl. MwSt., verhandelbar, FCA Oradea/Rumänien Irrtum, Änderungen und Zwischenverkauf vorbehalten. Wir sprechen Deutsch, Englisch, Ungarisch, Französisch und Rumänisch.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6119, Wir verkaufen eine gebrauchte CEVISA Anfasmaschine CHP-60G, Baujahr 2024, SN: 6119. - Fasenlänge: 60 mm; Fasenkapazität in einem Durchgang: 28 mm; Fasenoberfläche: gefräst (Fräskopf); stufenlos einstellbare Fasengeschwindigkeit je nach Material; optimale Fasengeschwindigkeit: 500 mm/min; kontinuierliches Plattenklemm-System: 4 Bar; 3 Zuführrollen permanent im Kontakt mit der Platte; 1 Rolle auf Höhe des Schnittpunktes garantiert: - keine Vibration, kein Lärm, - gleichmäßiges und konstantes Finish; tragbare Fräsmaschine; mobil und stabil; Arbeitshöhe einstellbar durch pneumatisches Hebesystem; elektronische Faseneinstellung; Display: hochpräzise; integrierte, verstellbare Fasenwinkel 15º bis 70º. * Nennblechdicke: 10 bis 100 mm. Motor: Drehstrommotor; Motorleistung: 5 PS – 3,8 kW; Spannung: 220/380 V 50 Hz, 250/440 V 60 Hz; 32-A-Stecker, Kabelquerschnitt: 2,5 mm², max. Maschinenverbrauch: 15A. Ledpfxjv Ed N Io Ah Uohg Elektrikgehäuse mit: Magnet-Schutzschalter, Not-Aus-Taster; Nettogewicht: 800 kg; Arbeitshöhe: verstellbar 760–940 mm. Fahrgestell integriert; Fasenarten: K-, V-, X- und Y-Formen; Fasengeschwindigkeit: 0,5 m/min; Drehstrommotor: drei Phasen und Erde, kein Neutralleiter, Motorleistung: 5 PS – 3,8 kW, Luftstrom: 200 l/min. Steuerung mit Unterspannungsauslösung, Not-Aus-Schalter, magnetothermischem Schutz; Nettogewicht Anfasmaschine: 800 kg, Arbeitshöhe: einstellbar 760–940 mm. Integrierter Fahrwagen. Preis: 34.000 EUR + MwSt., verhandelbar, FCA Oradea/Rumänien Irrtümer, Änderungen und Zwischenverkauf vorbehalten. Wir sprechen Englisch. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français. / Vorbim română.

Gamybos metai: 1995, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 4202, Technical specifications: - Plate thickness: up to 6 – 40 mm - Minimum tube bevel diameter: 100 mm - Max. bevel per pass: 10 mm - Working speed: 2.6 m/min - Drive: 400 V / 2.2 kW - Space requirement (approx.): W 550 x D 500 x H 700 mm - Weight (approx.): 65 kg Lhodpfjd Af Shjx Ah Ujg

Būklė: geras (naudotas), TIG suvirinimo aparatas REHM Invertig 160 GW Gera būklė Lsdpfsy Rydqsx Ah Ujhg

Būklė: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: KOG 130, išėjimo įtampa: 400 V, išėjimo dažnis: 50 Hz, išėjimo srovės tipas: trifazis, nominali galia: 150 kW (203,94 AG), nuolatinė galia: 130 kW (176,75 AG), sukimosi greitis (maks.): 1 500 aps./min, variklių gamintojas: MAN, aušinimo tipas: vanduo, Medienos biomasės kogeneracinė jėgainė KOG130_00 su įranga buvo suprojektuota kietojo kuro pavertimui dujiniu kuru. Gamybos proceso metu pagamintos dujos yra išvalomos ir atvėsinamos, po to perduodamos kogeneracinės jėgainės vidaus degimo varikliui. Kietajam kurui naudojamos natūralios G50-G100 klasės medienos skiedros. CHP linija aprūpinta konteineriniu MAN UPB-L-W-E3262E302 medienos dujų generatoriumi. Lhsdpfx Ahoywgp Hj Ueg

Būklė: labai geros būklės (naudotas), Dažniausiai naudojamas kūdikių maistui, tyrelei, padažams, kokteiliams, disfaginėms dietoms, valymo produktams ir kt. Ljdjyzcvqepfx Ah Uohg

Būklė: naudotas, Gamybos metai: 2012, veikimo valandos: 31 500 h, Funkcionalumas: visiškai funkcionalus, galia: 140 kW (190,35 AG), sukimosi greitis (min.): 1 500 aps./min, sukimosi greitis (maks.): 1 500 aps./min, bendras svoris: 3 500 kg, temperatūra: 25 °C, Natural Gas / Biogas CHP Unit Kuntschar und Schlüter / Wolf Power Systems 140 kW Electrical Output Engine: MAN 2876 Approx. 31,500 Operating Hours Year of Manufacture: 2012 Complete System: Control Cabinet, Heat Exchanger, Heating Pumps, Ignition System, Soundproof Enclosure, Silencer The engine was overhauled by MAN shortly before decommissioning (at approx. 29,700 operating hours): New cylinder heads, new pistons, new liners, etc. Comes with unit certificate Price negotiable The Kuntschar+Schlüter GTK 140 is a high-performance combined heat and power (CHP) unit based on a MAN natural gas engine, delivering 140 kW electrical and approx. 207–212 kW thermal output. It is particularly suitable for commercial applications and has been part of the Wolf Group (now Wolf Power Systems) since 2008. The GTK 140 is renowned for its high efficiency. Fully operational, in excellent condition Professionally dismantled and stored dry Type: E2876 E312 Ledpfoylmbqex Ah Ushg Engine No.: 298 3025 272 3007 Serial No.: 3007 Factory No.: 5019615 Job No.: Output: 140 kW Speed: 1,500 rpm Temperature: 25°C Installation Height: 100 m If you have any questions or need further information, please send us a message or call us.

Būklė: naudotas, Gamybos metai: 2009, veikimo valandos: 64 000 h, Funkcionalumas: ribota funkcionalumas, bendras svoris: 2 500 kg, kuro tipas: dujos, variklių gamintojas: MAN, Köhler & Ziegler MAN GAS Combined Heat and Power Unit (CHP) 54 kW – Leroy Somer Generator We are offering a Combined Heat and Power Plant (CHP) ⭐︎ Condition: The CHP unit is used and in good condition. ⭐︎ Condition: good (used) Fully functional and well-maintained! Recently dismantled! Ledpfx Aoy Rz N Uoh Ushg The MAN E0834 E302 is a stationary natural gas aspirated engine, primarily used in CHP plants for the combined generation of electricity and heat. This four-stroke Otto gas engine features a compact inline four-cylinder design. Manufacturer: Köhler & Ziegler, Germany Engine: - Manufacturer: MAN - Engine type: MAN E0834 E302 - Design: 4-cylinder inline, water-cooled - 4.6 litres - 1500 rpm Generator: - Manufacturer: Leroy Somer (Germany) - 90 kW - 3-phase, 400 Volt - 50 Hertz - Operating hours: approx. 64,000 hours Dimensions: L: 3100 mm x W: 1000 mm x H: 2000 mm Weight: Approx. 2500 kg Condition: - Used – Good The generator was operated in a publicly accessible building. Regular maintenance has been performed. ⭐︎ Further technical data: please see photos. Scope of delivery as shown. A viewing prior to purchase is possible and expressly encouraged. All our items are dismantled, cleaned, and visually inspected for damage by our qualified personnel before sale. Please refer to the description and the photos for all relevant data and information regarding the item. All information is provided to the best of our knowledge and belief; the offered goods are sold as described and inspected. International buyers welcome. Please ask for shipping costs to Europe and overseas. #2. Warehouse shelf 44-1-8 Scope of delivery: - MAN GAS Combined Heat and Power Unit 54 kW - Including electrical control cabinet Shipping: - Nationwide delivery within Germany available for an extra fee - To provide an exact shipping quote, please send me an enquiry with your postal code.

Būklė: naudotas, rida: 26 203 km, pirmoji registracija: 04/2020, kuro tipas: dyzelinas, padangos dydis: 385/95R22,5, ašių konfigūracija: 6x6, kuras: dyzelinas, stabdžiai: retarderis, pakaba: hidraulika, bendras ilgis: 11 180 mm, bendras plotis: 2 550 mm, bendras aukštis: 4 000 mm, Gamybos metai: 2020, Įranga: AdBlue, elektrinis langų reguliavimas, kranas, oro kondicionavimas, retarderis,

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, bendras svoris: 46 700 kg, kuro tipas: dujos, išėjimo srovė: 178 A, išėjimo įtampa: 6 600 V, išėjimo dažnis: 50 Hz, nepertraukiama (akivaizdi) galia: 1 976 kVA, variklių gamintojas: MWM Deutz, MWM Deutz TBG 441 CV16, įskaitant generatorių BHKW, dvejopo kuro (dujos, dyzelinas), 1993 metų, turime 7 vnt., generatorius AVK 6600V 173A 50Hz, valdymo sistema, apkrovos jungiklių spintos, kaminai, ekonomaizeriai, siurbliai, transformatoriai ir kt. Viso elektrinės demontavimas. Lodpsy Hmhbofx Ah Ushg

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 500 t, eigos ilgis: 1 000 mm, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8 Guide Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions with high rigidity, developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guide H-frame design ensures stable and repeatable operation by evenly distributing the high loads generated during pressing. The CHP 500 model is engineered for heavy-duty production processes requiring high tonnage, targeting long service life and reliable performance. Ljdjx N T H Aepfx Ah Uohg CHP Series – Structural Features CHP series presses are designed considering heavy-duty operating conditions. The frame and supporting components are stress-relieved by vibration. Bronze Zr14 slide bearings provide smooth load distribution and long-term precision throughout the ram movement. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guide slides - Stress-relieved frame and supporting components by vibration - Bronze Zr14 slide bearings - Certified welding applications with WPQR & WPS approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen control panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic monitored filter clogging warning - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 500 - Type: Steel construction, H-frame with 8 guide slides - Frame Material: St52 – ERDEMİR - Slide Bearing: Bronze Zr14 - Capacity (Ram): 500 Ton - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Minimum Clearance: 100 mm - Maximum Clearance: 1100 mm - Stress Relief: Vibration method - Welding Application: WPQR and WPS certification accredited by TÜRK-AK, welding process certificate per EN ISO 15614-1/2017 (inspected by certified welding coordination engineers according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moveable Table Rapid Down Speed: 150 mm/sec - Movable Table Pressing Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø500 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Height: 5800 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Distance from Floor to Lower Table: 1400 mm - Pre-Fill Valve: NG 150 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Encoder: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 23 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 1 000 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 1000 H-Type Single-Action Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-action hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications requiring high tonnage. The 8-guided H-frame structure evenly distributes the high forces generated during pressing, ensuring maximum rigidity, precision, and long service life. The CHP 1000 model has been developed to deliver reliable and stable performance in heavy industrial production lines. CHP Series – Structural Features CHP series presses are engineered with heavy industrial conditions in mind. The frame and main support constructions are stress-relieved by vibration. Smooth force distribution and high precision are achieved throughout the ram movement thanks to bronze Zr14 slide bushings. ⚙️ Standard Equipment Steel construction, 8-slide H-type press frame Vibration stress-relieved frame structure Bronze Zr14 slide bushings WPQR & WPS certified welding procedures accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) Design and manufacturing in compliance with CE standards PLC-controlled hydraulic system Touch panel display (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronics-controlled filter contamination alarm Real-time monitoring of hydraulic unit oil temperature and system status on the screen Cooling system Off-line filtration Two-hand control system Light curtain (standard for operator safety) SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 1000 Type: Steel construction, 8-slide H-frame press type Frame Material: St52 – ERDEMİR Lhodjx N T Rbjpfx Ah Usg Slide Bushing: Bronze Zr14 Capacity (Ram): 1000 Ton Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Squareness Tolerance: 60 micron/meter Ram Stroke: 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR and WPS certification accredited by TÜRK-AK (EN ISO 15614-1/2017) Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Inner Diameter: Ø500 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6000 mm Approx. Press Width: 3450 mm Approx. Press Depth: 2400 mm Lower Table Height from Floor: 1450 mm Pre-Fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC System: DELTA Touch Screen Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approx. Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 1 200 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8 Guides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are specifically designed for deep drawing, spinning, forming, and heavy-duty pressing applications. Thanks to the 8-guide H-frame construction, it provides maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model delivers reliable and long-lasting performance for industrial production lines requiring high force. The frame structure is stress-relieved by vibration method, ensuring balanced load distribution during pressing and maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment - Steel construction, H-frame body type with 8 guides - Frame structure stress-relieved by vibration - Bronze Zr14 slide bearings - Welding operations approved and accredited with WPQR and WPS by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC controlled hydraulic system - 7" DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching materials 📐 Technical Specifications – CHP 1200 Type: Steel construction, H-frame body with 8 guides Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram): 1200 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR and WPS approved by TÜRK-AK, with EN ISO 15614-1/2017 welding procedure certification Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Lhodpfx Aox N T Rueh Uog Moving Table Rapid Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Inner Diameter: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Height of Press: 6100 mm Approx. Width of Press: 3550 mm Approx. Depth of Press: 2400 mm Lower Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Screen: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 60 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 2 500 t, eigos ilgis: 1 000 mm, stalo plotis: 1 800 mm, stalo ilgis: 2 600 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8 Guideways General Description CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and pressing operations requiring extremely high tonnages. The 8-guideway H-frame structure ensures maximum rigidity during the pressing cycle, with stable parallelism and perpendicularity tolerances maintained throughout the full stroke. The CHP 2500 model is designed for automotive, heavy industry, defense, and high-tonnage die applications, featuring large table dimensions, a multi-cylinder main press configuration, and a high-capacity hydraulic system. The frame construction is stress-relieved using vibration methods to ensure long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - Welds certified by WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and production in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Real-time monitoring of hydraulic oil temperature and system status on the display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 - Type: Steel construction, 8-guideway H-frame press body - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 2500 Tons - Movable Table Dimensions: 1800 × 2600 mm - Fixed Table Dimensions: 1800 × 2600 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight: 200 mm - Max. Daylight: 1200 mm - Weld Stress Relief: By vibration - Welds: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1/2017) - Max. Working Pressure: 250 Bar - Total Motor Power: 180 kW – IE3 Lhjdpfx Ahjx N T S Ee Uog - Main Pump: 140 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/sec - Movable Table Drawing Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø565 mm – Ck45 (4 units) - Auxiliary Acceleration Cylinders: 2 units - Approx. Height: 6500 mm - Approx. Width: 3950 mm - Approx. Depth: 2600 mm - Lower Table Height from Floor: 1500 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC Control: DELTA - Touch Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approx. Weight: 120 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 100 t, eigos ilgis: 500 mm, stalo plotis: 800 mm, stalo ilgis: 1 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 100 H-Frame Single-Acting Hydraulic Press – 8-Guideway General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are industrial presses with a rigid steel construction designed for sheet forming, straightening, assembly, and die pressing applications. The 8-guideway H-frame ensures high stability and repeatable precision during pressing operations. CHP Series – Structural Features Lodpjx N Tx Sofx Ah Uehg CHP series presses are engineered with heavy-duty applications in mind. The frame and supporting components are stress-relieved by vibration. The bronze Zr14 used in the slide bearings provides long-lasting and stable operation. Key Advantages - 8-guideway H-frame structure - Stress-relieved steel construction by vibration - Welding applications conforming to ISO standards - PLC-controlled and touchscreen-operated - Operator safety and process stability-focused design ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Stress-relieved frame and carrier components via vibration - Bronze Zr14 slide bearings - WPQR & WPS approved welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - 7" DELTA touchscreen display - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system and off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guideway H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 100 Ton Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Stress Relief: Vibration Welding Application: TÜRK-AK accredited WPQR and WPS certified to EN ISO 15614-1/2017 (supervised by welding engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/sec Movable Table Forming Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Inner Diameter: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approximate Height: 3400 mm Approximate Width: 2950 mm Approximate Depth: 2000 mm Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 200 t, eigos ilgis: 600 mm, stalo plotis: 800 mm, stalo ilgis: 1 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 200 H-Type Single-Acting Hydraulic Press – 8-Guided Slideways General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guided slideway H-frame construction, loads generated during pressing operations are distributed evenly, ensuring stable and repeatable performance. The CHP 200 model is specifically designed to deliver reliable performance and long service life for applications requiring medium to high tonnage. CHP Series – Structural Features CHP series presses are engineered considering heavy-duty operational requirements. Frame and support components are stress-relieved through vibration methods. Bronze Zr14 slide bearings ensure smooth ram motion and sustained precision over time. ⚙️ Standard Equipment - Welded steel construction, 8-guided H-type press frame - Frame and support parts stress-relieved by vibration - Bronze Zr14 guide bearings - WPQR & WPS certified welding procedures accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and manufacture in compliance with CE standards - PLC-controlled hydraulic system Lhsdpfxjx N T D Us Ah Ujg - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Display of hydraulic unit oil temperature and system status on the screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 200 Type: Welded steel construction, 8-guided H-type press frame Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram): 200 tons Moving Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ram Stroke: 600 mm Min. Open Height: 100 mm Max. Open Height: 700 mm Weld Stress Relief: Vibratory stress relief Welding Procedure: WPQR and WPS certified by TÜRK-AK, with compliance to EN ISO 15614-1/2017 (inspected by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Pressing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 3800 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2200 mm Fixed Table Height from Floor: 1350 mm Main Filling Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approx. Weight: 8 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 150 t, eigos ilgis: 500 mm, stalo plotis: 800 mm, stalo ilgis: 1 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 150 H-Type Single-Acting Hydraulic Press – 8 Slide Guides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial presses with a rigid steel construction designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its 8-slide guide H-frame design, it ensures stable, balanced, and repeatable performance during pressing operations. The CHP 150 model is developed to provide reliable performance and long service life for medium-tonnage applications. CHP Series – Structural Features CHP series presses are engineered considering heavy-duty conditions. The frame and load-bearing parts are stress-relieved by vibration. Bronze Zr14 slide bushings ensure smooth load transfer and prolonged, stable operation. ⚙️ Standard Equipment Steel construction, 8-slide guide H-frame press body Frame and load-bearing parts stress-relieved by vibration Bronze Zr14 slide bushings WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) Machine construction designed and manufactured in compliance with CE standards PLC-controlled hydraulic system Touch panel display (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronic filter contamination warning On-screen monitoring of hydraulic unit oil temperature and system status Cooling system Off-line filtration Two-hand control system Light barrier (standard for operator safety) SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 150 Type: Steel construction, 8-slide guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bushings: Bronze Zr14 Capacity (Ram): 150 Ton Moving Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Squareness Tolerance: 60 micron/meter Stroke (Ram): 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Lhjdpfsx N T Dzjx Ah Uog Weld Stress Relief: Vibration method Welding Operations: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1/2017 (inspected by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø280 mm – Ck45 Approx. Height of Press: 3650 mm Approx. Width of Press: 2950 mm Approx. Depth of Press: 2000 mm Height of Lower Table from Floor: 1250 mm Pre-Fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Encoder: NOVATECHNIK or TURCK PLC System: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 7 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 400 t, eigos ilgis: 800 mm, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 400 H-Type Single-Acting Hydraulic Press – 8-Guided Slides Lhedpfxjx N T Hpe Ah Ujg General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial press solutions designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guided H-frame construction, the high loads generated during pressing operations are distributed evenly, ensuring stable and repeatable performance. The CHP 400 model is specifically engineered to deliver reliable, long-lasting heavy-duty performance where high tonnage is required. CHP Series – Structural Features CHP series presses are engineered for demanding industrial environments. The frame and supporting components are stress relieved by vibration. Bronze Zr14 guide bushings ensure smooth load distribution during ram motion, maintaining long-term precision. ⚙️ Standard Equipment - Steel construction, 8-slide H-type press frame - Vibration stress-relieved frame and carrier components - Bronze Zr14 guide bushings - WPQR & WPS certified welding processes accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and manufacture according to CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram stroke and tonnage settings - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring via display - Cooling system - Off-line filtration system - Two-hand control system - Light barrier (standard operator safety feature) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 400 Type: Steel construction, 8-slide H-frame press Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 400 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Weld Stress Relief: Vibration stress relieving Welding Application: WPQR & WPS certified by TÜRK-AK, following EN ISO 15614-1/2017 (supervised by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Rapid Down Speed: 150 mm/s Moving Table Pressing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø450 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5600 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Solution: DELTA Touch Screen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 19.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 800 t, eigos ilgis: 800 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 800 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-guide H-frame structure ensures uniform distribution of forces generated during pressing, providing maximum rigidity and long-lasting operation. The CHP 800 model has been developed to deliver reliable and stable performance for high-capacity production lines. CHP Series – Structural Features CHP series presses are engineered with heavy industry requirements in mind. The frame and main carrier components are stress-relieved by vibration. Bronze Zr14 guide bushings provide even load distribution and precise operation during ram movement. ⚙️ Standard Equipment - Steel construction, 8-guide H-type press frame - Vibration stress-relieved frame structure - Bronze Zr14 guide bushings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and production in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring via display - Cooling system - Off-line filtration - Two-hand operation control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 800 - Type: Steel construction, 8-guided H-frame press - Frame Material: St52 – ERDEMİR - Guide Bushing: Bronze Zr14 - Capacity (Ram): 800 Ton - Movable Table Size: 1500 × 2000 mm - Fixed Table Size: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Squareness Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS-certified welding accredited by TÜRK-AK; EN ISO 15614-1/2017 welding certificate (inspection by certified welding coordination engineers according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Rapid Down Speed: 150 mm/s - Movable Table Drawing Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Main Cylinder Bore: Ø390 mm – Ck45 (2 pcs) - Auxiliary Acceleration Cylinders: 2 pcs - Approximate Height: 6000 mm - Approximate Width: 3350 mm - Approximate Depth: 2700 mm - Lower Table Height from Floor: 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 45 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey. Ljdpfx Ahex N T Nkj Ushg

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 2 000 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 500 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8-Guideway General Description The CRONOSSTECH CHP series H-type hydraulic presses are developed for heavy-duty forming, deep drawing, spinning, and die applications requiring extremely high tonnage. Thanks to the 8-guideway H-frame structure, maximum rigidity is achieved during pressing, and parallelism and perpendicularity tolerances are maintained throughout the long stroke. The CHP 2000 model, with its large table dimensions, high-capacity hydraulic system, and powerful motor, offers a reliable and long-lasting solution for automotive, defense, heavy industry, and high-tonnage production lines. The frame structure is stress-relieved by vibration to ensure stable operation. ⚙️ Standard Equipment Lsdpfxsx N T Srj Ah Uohg - Steel construction, 8-guideway H-frame press type - Vibration stress-relieved frame structure - Bronze Zr14 guideway bearings - Welding procedures approved by TÜRK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 2000 - Type: Steel construction, 8-guideway H-frame press - Frame Material: St52 – ERDEMİR - Guideway Bearings: Bronze Zr14 - Capacity (Ram): 2000 Tons - Movable Table Dimensions: 1500 × 2500 mm - Fixed Table Dimensions: 1500 × 2500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 200 mm - Max. Daylight: 1200 mm - Weld Stress Relief: Vibration stress relief - Welding Procedure: WPQR and WPS approved by TÜRK-AK, certified to EN ISO 15614-1/2017 - Max. Working Pressure: 250 Bar - Total Motor Power: 180 kW – IE3 - Main Pump: 140 cm³ – REXROTH or PARKER - Movable Table Fast Descent Speed: 150 mm/sec - Movable Table Spinning Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø720 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 6300 mm - Approximate Press Width: 3850 mm - Approximate Press Depth: 2500 mm - Table Height from Ground: 1500 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Encoder: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 95 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 300 t, eigos ilgis: 600 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 200 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 300 H-Type Single-Acting Hydraulic Press – 8-Guided Slideways General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial solutions designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its 8-guided H-frame construction, the system evenly distributes high loads encountered during pressing operations, ensuring stable and repeatable performance. The CHP 300 model is engineered to deliver long-lasting, reliable performance for medium to high-tonnage production processes. CHP Series – Structural Features Designed to withstand heavy-duty operating conditions, CHP series presses feature a frame and load-bearing components stress-relieved by vibration. The bronze Zr14 slideway guides guarantee consistent load distribution during ram movement, maintaining long-term precision. ⚙️ Standard Equipment - 8-guided, H-type welded steel frame construction - Stress-relieved frame and load-bearing components via vibration - Bronze Zr14 slideway guides - WPQR & WPS certified welding by TÜRK-AK accredited process (EN ISO 15614-1:2017 / EN ISO 14731) - Machine construction designed and manufactured to CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen HMI - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system Lsdpfx Aex N T E Esh Uehg - Light curtain (standard for operator safety) - SIEMENS–SCHNEIDER switchgear components 📐 Technical Specifications – CHP 300 Type: Welded steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMİR Slideway Guide: Bronze Zr14 Capacity (Ram): 300 Ton Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: By vibration Welding Certification: WPQR & WPS certified by TÜRK-AK (EN ISO 15614-1/2017), supervised by certified welding engineers in accordance with EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Rapid Down Speed (Movable Table): 150 mm/s Pressing Speed (Movable Table): 12 mm/s Return Speed (Movable Table): 170 mm/s Main Cylinder Inner Diameter: Ø390 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 4400 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Control: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 10.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 1 500 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 400 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8-Guideway General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are designed for deep drawing, forming, and heavy-duty shaping applications requiring high tonnage. The 8-guideway H-frame structure ensures maximum rigidity and stability during pressing operations, helping to maintain parallelism and perpendicularity tolerances. The CHP 1500 model offers a reliable solution for automotive, defense, heavy metal forming, and industrial production lines thanks to its large table dimensions, robust hydraulic system, and high stroke capacity. The frame is relieved of residual stress by vibration treatment, aiming for long-lasting, stable operation. ⚙️ Standard Equipment • Steel construction, H-frame press body with 8 guideways • Stress-relieved frame by vibration treatment • Bronze Zr14 slideway bearings • Welded assemblies approved by TURK-AK accredited WPQR and WPS procedures (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing according to CE standards • PLC-controlled hydraulic system • 7” DELTA touchscreen control panel • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronically-controlled filter contamination warning • On-screen monitoring of hydraulic oil temperature and system status • Cooling system • Off-line filtration • Safety systems for operator protection • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1500 Type: Steel construction, H-frame body with 8 guideways Frame Material: St52 – ERDEMIR Guideway Bearing: Bronze Zr14 Capacity (Ram): 1500 tons Moving Table Size: 1500 × 2400 mm Fixed Table Size: 1500 × 2400 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Lhjdpfxjx N T R Uo Ah Usg Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibration treatment Welding Procedure: Welding certified in compliance with EN ISO 15614-1/2017, approved by TURK-AK WPQR and WPS Max. Working Pressure: 250 bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Moving Table Rapid Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø620 mm – Ck45 (2 units) Auxiliary Rapid Cylinders: 2 units Approximate Press Height: 6250 mm Approximate Press Width: 3750 mm Approximate Press Depth: 2500 mm Lower Table Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Scale: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 70 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 250 t, eigos ilgis: 600 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 200 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 250 H-Frame, Single-Acting Hydraulic Press – 8-Guided Slideways General Description The CRONOSSTECH CHP series single-acting H-frame hydraulic presses are robust industrial solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guided H-frame body, loads generated during pressing are distributed evenly, ensuring stable and repeatable operation. The CHP 250 model is engineered to provide long-lasting and dependable performance, particularly for medium to high tonnage production processes. CHP Series – Structural Features CHP series presses are designed for heavy-duty industrial use. The frame and support elements are stress-relieved by vibration processing. Bronze Zr14 slideway bushings guarantee consistent and precise load distribution during ram movement, contributing to long-term high accuracy. ⚙️ Standard Equipment - Welded steel construction, H-frame with 8 guided slides - Frame and structural components stress-relieved by vibration - Bronze Zr14 slideway bushings - WPQR & WPS-certified welds, TÜRK-AK accredited (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter clogging warning - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Two-hand safety control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 250 Type: Welded steel, 8-guided H-frame press Frame Material: St52 – ERDEMİR Slideway Bushing: Bronze Zr14 Capacity (Ram): 250 Tons Movable Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 microns/meter Perpendicularity Tolerance: 60 microns/meter Ram Stroke: 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration stress-relieving Welding Application: WPQR & WPS accredited by TÜRK-AK; EN ISO 15614-1/2017 compliant (inspected by certified welding coordination engineers per EN ISO 14731) Max. Operating Pressure: 250 Bar Ljdpjx N T Elefx Ah Ushg Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Rapid Down Speed: 150 mm/s Movable Table Pressing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Bore: Ø360 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height: 4200 mm Approx. Width: 3250 mm Approx. Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC: DELTA Touch Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 9.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 600 t, eigos ilgis: 800 mm, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 600 H-Type Single-Acting Hydraulic Press – 8-Guideway General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial machines developed for sheet metal forming, straightening, assembly, and heavy-duty pressing applications. The 8-guideway H-frame structure ensures balanced distribution of the high forces generated during pressing, delivering long-lasting and stable operation. The CHP 600 model is engineered to provide reliable performance in production processes requiring high tonnage. CHP Series – Structural Features CHP series presses are designed with consideration for heavy-duty operating conditions. The frame and supporting components are stress-relieved by vibration. The Bronze Zr14 slideway bearings ensure uniform load distribution and high precision throughout the ram motion. ⚙️ Standard Equipment Steel construction, 8-guideway H-type press frame Vibration-stress-relieved frame structure Bronze Zr14 slideway bearings TÜRK-AK accredited WPQR & WPS approved welding applications (EN ISO 15614-1:2017 / EN ISO 14731) Design and manufacturing compliant with CE standards PLC-controlled hydraulic system Touch panel display (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronic filter contamination warning Monitoring of hydraulic unit oil temperature and system status via display Cooling system Off-line filtration Two-hand control system Light barrier (as standard for operator safety) SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 600 Type: Steel construction, 8-guideway H-frame Body Material: St52 – ERDEMİR Slideway Bearing: Bronze Zr14 Capacity (Ram): 600 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/mt. Perpendicularity Tolerance: 60 micron/mt. Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress-relieving Welding Application: WPQR and WPS approved by TÜRK-AK, certified EN ISO 15614-1/2017 welding applications (supervised by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 55 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Pressing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø550 mm – Ck45 Pot Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Accelerating Cylinders: 2 pcs. Approximate Press Height: 5900 mm Approximate Press Width: 3250 mm Approximate Press Depth: 2300 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 28 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey. Lodpfxex N T Iaj Ah Ujhg

Būklė: naudotas, Gamybos metai: 2005, veikimo valandos: 140 000 h, Funkcionalumas: ribota funkcionalumas, Machine designation: Used combined heat and power unit (CHP) Manufacturer: Köhler / Ziegler Model: SY 53 GSM Ledpfx Aowyax Toh Ujhg Year of manufacture: 2005 Generator: Leroy Somer Generator model: LSA 44.27/4 Generator power: 132 kVA Fuel type: Sewage gas Electrical output: 53 kW Thermal output: 87 kW Drive engine: MAN E0836 E302, 6 cylinders, 56 kW Dimensions: L 3600 x W 950 x H 1750 mm Unladen weight: 2200 kg Technical documentation: Yes Note: Engine replaced in 2013 Condition: Used Price: On request