Buchholz Of375 pirkti naudotą (36)

Būklė: naudotas, Hydraulic power unit, hydraulic pump, hydraulic motor Lhsdjb Uht Aepfx Af Hok - Hydraulic power unit originates from a Jungheinrich electric forklift - 2x drive motors - Filter - Control valve - Hydraulic tank: 930/400/H360 mm - Dimensions: 1000/400/H800 mm - Weight: 288 kg

Būklė: naudotas, Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, 5 MVA alyvoje užpildytas transformatorius, gamintojas „Schneider“, pagamintas 1999 m., 20 +- 5 % / 10 kV, jungimo grupė Yy0; buvo naudojamas iki 2026-07; su slėgio kompensatoriumi, „Buchholz“ relė, oro džiovintuvu, rodomuoju termometru. Lhodpfozr Ur Ajx Af Hok

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Technical condition very good, tested. This means that the devices have been calibrated and perform 100% accurate measurements. They are heated regularly for at least 12 hours once a month. It is possible to carry out a transformer oil test on-site—naturally only after pre-checking the sample to enable comparison of results, as shown in the photos. The MYRKOS chromatograph performs dissolved gas analysis (DGA) in electrical insulating oils. It allows early detection of developing faults in power transformers and other oil-filled apparatus (such as reactors and instrument transformers). It also enables analysis of a gas sample collected from a Buchholz relay! The MYRKOS chromatograph is highly precise, compact, and offers comprehensive coverage for all significant fault gas concentrations required for oil testing. The gas standard (calibration gas cylinder) ensures measurement consistency with concentration references. Prior to each measurement, the device undergoes calibration and a functionality check. A special shake syringe (included in the set) ensures the correct volume ratio. This is an excellent solution for oil testing laboratories at power plants and research institutes serving the energy sector. The PPMReport software, including a Polish language version, is supplied. Built-in diagnostic tools include the Duval Triangle and Rogers Ratios. Widely used by utilities, grid operators, and laboratories servicing industrial and professional energy sectors. The field version comes equipped with a dedicated pressurized helium carrier gas container (purity 99.999%). Supplied with shake syringes for preparing the extraction gas phase, as well as syringes for calibration and air sampling. TECHNICAL PARAMETERS Number of detectable gases: 9 (Hydrogen H2, Methane CH4, Ethane C2H6, Ethylene C2H4, Acetylene C2H2, Carbon Monoxide CO, Carbon Dioxide CO2, Oxygen O2, Nitrogen N2) Gas concentration measurement range in oil: H2: 5–60,000 ppm, Other gases: 1–60,000 ppm, O2: 60–100,000 ppm, N2: 500–100,000 ppm TECHNICAL DESCRIPTION Gas chromatograph for testing electrical insulating oils by Dissolved Gas Analysis (DGA), suitable for both field and laboratory applications. The laboratory version includes a shaker. The MYRKOS chromatograph analyzes concentrations of dissolved gases in insulating oil (DGA), enabling early detection of developing faults in power transformers and other oil-filled devices (such as reactors and instrument transformers). It can also analyze gas collected from a Buchholz relay. The MYRKOS chromatograph is highly accurate, compact, and ensures complete coverage of critical fault gas concentrations required for oil analysis. Condition: Very good. We have two identical, fully operational units available; when purchasing both, the price for one is 50% lower. Before purchase, I recommend viewing and testing the equipment on-site (conducting a trial). The last test was performed on 21 Nov 2025 and was compared with another MYRKOS unit (verification performed in a certified laboratory). Lsdozcmblspfx Af Hjhk Available for viewing in Rzeszów.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras svoris: 3 000 kg, rotoriaus skersmuo: 400 mm, peilių skaičius: 10, bendras ilgis: 1 120 mm, bendras aukštis: 1 950 mm, valdymo spintos ilgis: 500 mm, valdymo spintos plotis: 300 mm, valdymo spintos aukštis: 1 500 mm, bendras plotis: 1 210 mm, rotoriaus plotis: 600 mm, galia: 22 kW (29,91 AG), įvesties srovės tipas: trifazis, sietų perforacija: 6 mm, garantijos trukmė: 12 mėnesiai, įėjimo įtampa: 400 V, vidinis plotis: 590 mm, atidarimo plotis: 400 mm, Įranga: CE žymėjimas, ZERMA GS 400/600 – didelio našumo smulkintuvas | Tikslumas. Našumas. Patikimumas. Susipažinkite su naujuoju ZERMA GS 400/600 didelio našumo smulkintuvu. Šiame vaizdo įraše parodysime svarbiausias mūsų naujausios smulkintuvų serijos funkcijas ir konstrukcijos ypatumus. GS serija sukurta, siekiant patenkinti aukščiausius reikalavimus, apdirbant plastiką, ir ji derina maksimalų našumą, išskirtinį patikimumą ir paprastą priežiūrą. Pagrindiniai privalumai: ✔️ Rotoriaus skersmuo: 400 mm ✔️ Rotoriaus plotis: 600 mm ✔️ Patikrinta ZERMA V-Cut technologija ✔️ Galima pasirinkti 3 arba 5 peilių rotorą ✔️ Tvirti plieniniai komponentai ✔️ Pažangi atidarinėjama smulkintuvo sistema ✔️ Išorinis peilių reguliavimas ✔️ Tvirti guoliai, esantys už smulkintuvo kameros ✔️ Papildomas aplenkamasis įtaisas ilgoms detalėms ir vamzdžiams ✔️ Sukurtas darbui pramonėje nepertraukiamai Tipinės sritys: * Liejinio atliekos ir liejimo detalės + pradiniai krešuliai, sveriantys iki 1 kg * Plastikiniai profiliai * Vamzdžiai * Plokštės * Plėvelės * Pūčiami gaminiai Lsdpfjzmhgijx Af Hshk * Inžineriniai plastikai * Gamybos atliekos * Perdirbimas po pramonės proceso GS 400/600 – tai tikslus smulkinimas, didelis našumas ir ilgas eksploatavimo laikas – idealus sprendimas šiuolaikiniams plastiką apdirbantiems įmonėms ir perdirbimo įmonėms.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2008, 15 MVA alyvos transformatorius, su išsiplėtimo baku, Buchholz rele, oro sausikliu, žingsniavimo jungikliu; Siemens, 2008, jungimo grupė Ynd5, yra visas transformatoriaus žurnalas Lhsdpfx Afeugg Dfe Hek

Būklė: naudotas, Gamybos metai: 2012, Nr. 3268 Cutting and Machining Centre Schirmer BAZ 1000-G6 / VU “Basic” Used, year of manufacture 2012 Comprising: - Cutting and machining centre Schirmer BAZ 1000-G6 / VU “Basic” - Steel cut-to-length machine Schirmer SZA 450 - Buffer screwing station Schirmer - Bar machining centre Schirmer SBZ I Cutting and Machining Centre Schirmer BAZ 1000-G6 / VU “Basic” - Cutting length: 300 – 3900 mm - Automatic loading magazine for 9 profiles up to max. 6500 mm in length - Automatic transfer station - Infeed unit for PVC profiles up to 6500 mm in length with NC-positioned gripping tongs, positioning speed up to 150 m/min - Profile length measuring device including optimization software - Automatically adjustable profile guides - Machining station equipped as G-module “Ultra Speed” Machining operations on the PVC profile: - Drainage and ventilation slots/holes in frame, sash, and mullion profiles, handle drilling for entrance doors, striker plate markings, lock case routing - Height measuring device for detecting profile tolerances - Gasket cutting device - VU saw unit with double saw aggregate 2x 45° - Saw unit in standard version with 1 sawing aggregate, swiveling +45° to -45° - Conveyor belt for scrap removal - NC controlled gripper for bar discharge, positioning speed up to 180 m/min - PC machine control: 7-slot ATX industrial PC, Microsoft Win XP Prof., software: TwinCAT NCI - Horizontal circulating buffer for transporting the profiles to the steel infeed station and screwing station for steel infeed with 8 infeed slots Ledpfx Afoy Nnnnj Hshk - Monitor for steel length display - Automatic label printer Steel Cut-to-Length Machine Schirmer SZA 450 - Automatic loading magazine, max. profile length 6000 mm, profile width 25 - 50 mm, profile height 15 - 60 mm, wall thickness max. 4 mm - Infeed unit - Standard saw unit for 90° cuts - Automatic bar discharge - Belt conveyor - Extraction device - Steel scrap processing - Steel length measurement in steel loading magazine Buffer Screwing Station Schirmer - Infeed unit for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Screwing station - Steel infeed fingers for reinforcement profiles up to 200 mm insertion depth Bar Machining Centre Schirmer SBZ I - Infeed unit for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Measuring probe for automatic determination of the datum point at the profile start - Drilling station with 4-axis CNC control, 2 axes vertical, 1 axis horizontal, and 1 axis for X-feed - NC controlled gripper for bar discharge - Belt conveyor in special version for cross-rejecting - Striker plate visualization software including monitor - Screwing station with screw feed - Guide rail with balancer for bar screwing unit - Bar screwing unit with automatic screw feed System capacity: Approx. 120 window units 1400 x 1500 mm / 8 hours If the machine is expanded with another screwing unit at the buffer screwing station, output increases to approx. 160 units / 8 hours Sale by customer order, ex location near 30625 Hannover, without dismantling, without transport or installation To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended For used machines, all warranties are excluded; sale is subject to: “as viewed”

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, darbinė masė: 700 kg, statybinis aukštis: 1 970 mm, statybos plotis: 900 mm, triukšmo lygis: 80 dB, peilių skaičius: 3, rotoriaus skersmuo: 250 mm, rotoriaus plotis: 450 mm, garantijos trukmė: 12 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, Optimization of an established concept. Size reduction of large-volume blow-molded parts as well as start and end pieces In a compact redesign, the best features from the proven GST and GSC series have been integrated, with special emphasis on weight, handling, and energy efficiency. These compact granulators are fully soundproofed, resulting in exceptionally quiet operation. The granulators are available with a rotor diameter of 250 mm and widths of 300, 450, and up to 600 mm. The curved back wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, rotor and stator knives are adjustable outside of the machine, which helps minimize downtime during maintenance. The highly tangential, curved back wall of the cutting chamber, in combination with the aggressive open rotor design, ensures reliable material processing and minimizes the risk of blockages. These compact granulators are suitable for use in blow molding operations. They are ideal for recycling large-volume items such as bottles, canisters, and crates. Thanks to the low feed height, materials can be easily loaded either manually or via a small conveyor belt. The low noise emissions and space-saving footprint make this granulator the perfect solution for inline size reduction. 98T8Mrx Optional rear wall with elevated stator knife (M version): Lhsdpfx Afjt Aagae Hjk The feeding method with an elevated stator knife is better suited for thicker-walled and more compact parts, such as injection-molded parts, profiles, sheets, etc. Due to the cutting geometry and the reduced aggressiveness of the rotor, high-quality regrind is achieved regardless of material type or shape, e.g., injection molded parts, profiles, sheets, and so on. Control system and electrical cabinet: The integrated control and operator panel comply with all current safety regulations and can also be tailored to specific requirements. In addition, peripheral devices such as feed conveyors, metal detectors, and discharge systems can be seamlessly integrated into the machine's control system. For increased efficiency, an optional intelligent energy-saving feature is available, which reduces power consumption during idle phases and can start or stop the system automatically based on the status of upstream machines. Standard configuration with blower, power consumption 0.37 kW, and 400 cyclone Rotor diameter (mm) 250 Rotor width (mm) 450 Drive (kW) 7.5 Number of rotor knives 3 x 2 Number of stator knives 2 Screen perforation (mm) >6 Weight approx. (kg) 700 Feed opening (mm) 380 x 450 Feed opening option for M version (mm) 295 x 450

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 400 mm, pavaros tipas: Direktgetriebe, piltuvo skersmuo: 400 mm, nominali galia: 7,5 kW (10,20 AG), peilių skaičius: 33, sukimosi greitis (maks.): 150 aps./min, rotoriaus skersmuo: 300 mm, rotoriaus plotis: 400 mm, sietų perforacija: 6 mm, Tiesioginė pavara per pavarų variklį Nereikia reguliavimo dėl specialių rotoriaus peilių Ljdpfx Afsn Hqxfo Hohk Lengva prieiga prie techninės priežiūros ir valymo darbų Maža triukšmo emisija ir nedulkantis malūno produktas dėl lėto rotoriaus greičio Universalus pritaikymas su įvairiomis parinktimis Rotoriaus skersmuo (mm): 300 Rotoriaus plotis (mm): 400 Rotoriaus greitis (min⁻¹): 150 Variklio galia (kW): 7,5 Rotoriaus peilių skaičius: 33 Statoriaus peilių skaičius: 2 Sieto skylė (mm): > 6 Svoris apie (kg): 550

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: TH GST 4060 2411 001, bendras svoris: 1 650 kg, rotoriaus skersmuo: 400 mm, peilių skaičius: 6, rotoriaus plotis: 600 mm, galia: 22 kW (29,91 AG), The compact inline granulators of the GST series are suitable for use in injection molding and blow molding operations. They are ideal for recycling, for example, bulky items such as bottles, canisters, crates, sprues, and molded parts. Due to the low feed height, the machines can be easily loaded manually or with a small conveyor belt. Low noise emissions and minimal space requirements make the GST series a perfect solution for inline size reduction. All machines in the GST series feature a compact, sound-insulated machine housing and a noise-dampened feed hopper. The feed hopper can be opened and closed using a gas pressure damper. The compact granulators are available with two rotor diameters (250 mm, 400 mm) and rotor widths ranging from 300 to 1000 mm. The smaller models are equipped with an open F-rotor, while the larger models feature a heavier S-rotor. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material blockages. Thanks to the modular design, the granulator can be easily upgraded with additional options such as interchangeable wear plates. As with all ZERMA granulators, rotor and stator knives are adjustable outside the machine, reducing downtime during maintenance. A setting gauge is included in the delivery. The control cabinet is securely mounted to the outside of the sound enclosure, with all wiring kept internal to the unit. Technical data: - Rotor diameter (mm): 400 - Rotor width (mm): 600 - Drive power (kW): 22 - Rotor blades (rows): 3 x 2 - Stator blades (rows): 2 - Screen perforation (mm): > 8 - Cutting chamber (mm x mm): 400 x 600 - Weight (approx. kg): 2000 Lhsdpfx Afjy Dgpmj Hok

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, statybinis aukštis: 1 207 mm, statybos plotis: 420 mm, peilių skaičius: 30, rotoriaus skersmuo: 180 mm, rotoriaus ilgis: 300 mm, Įranga: CE žymėjimas, Slow-speed beside-the-press granulator Rotor diameter (mm): 180 Rotor width (mm): 300 Rotor speed (rpm): 150 Drive power (kW): 4 Ljdpfx Aeyzrfujf Hjhk Number of rotor knives: 30 Number of stator knives: 2 Screen perforation (mm): >5 Weight approx. (kg): 180 The slow-speed beside-the-press granulators of the GSL 180 series feature a rotor diameter of 180 mm and working widths ranging from 120 to 430 mm. The rotor is directly driven via a gear motor. The low rotor speed ensures reduced noise levels and a consistent regrind quality. The special rotor knives can be resharpened multiple times, eliminating the need for complex adjustment work. The granulators are loaded via a noise-insulated chute in sandwich construction. Depending on the application, the machines can be equipped with various hopper variants. Optional low and high base frames are available. The regrind can be extracted, filled into bags, or collected in a plastic container. Easy and quick maintenance is ensured by the Quick Snap quick-release system.

Būklė: naudotas, Gamybos metai: 1978, 10 MVA oil transformer, TuR Dresden, 30 / 10.5 kV with on-load tap-changer, 19 steps, vector group YNyn0, equipped with conservator, Buchholz relay, air dehumidifier, cooling fans, dial thermometer, year of manufacture 1978. Ljdpfx Ast Akl Hef Hohk

Būklė: naudotas, Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, 3150 kVA aliejinis transformatorius, 20500V – 5 pakopos/6600V, su išplėtimo baku, Buchholzo relė, rodykliniai termometras, Dyn5, pagaminimo metai 1985, gamintojas Asea Lepper, tipas DOHH Lhjdjw In Htepfx Af Hok

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 1 640 mm, bendras ilgis: 1 400 mm, bendras plotis: 1 100 mm, bendras svoris: 267 kg, Įranga: CE žymėjimas, Tipinė plokštelė prieinama, dokumentacija / vadovas, ISI-Flow Desk – 1000VH – 960 m³/h – 400 V Traukimo stalas, suvirinimo ir šlifavimo traukimo stalas su 1,1 kW ventiliatoriumi, filtro kasečiu ir medinėmis grotelėmis bei galine sienele su ištraukimu, lubomis ir šoninėmis sienomis be izoliacijos. Traukimo stalas su automatiniu suslėgto oro filtro valymu ir integruotu ventiliatoriumi, skirtas ne sprogstamų, sausų dulkių ir dujų ištraukimui. TECHNINIS APRAŠYMAS: Ištraukimo našumas: 960 m³/h Dulkių klasė: M Darbinis paviršius P/G mm: P 892 / G 765 Darbinis aukštis mm: A 690 - 924 Stalo apkrova: 150 kg/m (medis, tolygiai paskirstyta apkrova) Darbinis paviršius: medinės grotelės (galima pasirinkti plieno, nerūdijančio plieno arba plastiko grotelės) Bendri matmenys P/G/A mm: P 1400* / G 1100 / A 1640 (galimi variantai L = 1500/2000 mm) Suslėgto oro jungtis: taip, min. 5,5 – maks. 6,0 bar (filtro valymui) Ventiliatoriaus galia: 1,1 kW Darbinė įtampa: 3 x 400 V, 50 Hz, 2 polių Triukšmo lygis*: 65 dB(A) be valymo / 85 dB(A) be valymo Vamzdžio jungtis: D = 250 mm Spalva: RAL 7042 / RAL 7011 Svoris: 267 kg * Su ventiliatoriumi ir antgaliu Panaudojimo sritis: Traukimo stalas su ventiliatoriumi naudojamas dulkių ir suvirinimo dūmų atskyrimui iš proceso oro. Tinka darbams, kurių metu susidaro dūmai ir dulkės, pvz., suvirinimas, šlifavimas ir pan. Jūsų nauda su ISI-Flow Desk serija: - Pristatoma 12 įrenginių variantų - Filtravimas su suslėgto oro valomais M klasės filtro kasetėmis - Automatinis filtro valymas vienu mygtuko paspaudimu - Diferencinio slėgio manometras lengvam filtro užsiteršimo stebėjimui - Integruotas energiją taupantis ventiliatorius 3x400V, 50 Hz, 2 polių; uždari ventiliatoriaus sparnai, atgal nukreiptos, savaime besivalančios mentės; ISO 14694 (BV3 G 6.3) balansuotas - Galinė siena, šoninės sienos ir lubos užtikrina efektyvų ištraukimą ir optimalų oro srauto valdymą - Aukščio reguliuojamas darbinis stalas Lsdpszdty Nofx Af Hohk - Platus priedų ir jungiamųjų detalių pasirinkimas - Europos kokybė Patikimam ir efektyviam oro srauto valdymui nuo ištraukimo iki išleidimo. ISI Air traukimo stalas negali būti naudojamas kartu su ATEX zonomis. Nuotraukose gali būti pavaizduota papildoma įranga.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 938 mm, bendras ilgis: 2 000 mm, bendras plotis: 1 100 mm, bendras svoris: 100 kg, Įranga: CE žymėjimas, Tipinė plokštelė prieinama, dokumentacija / vadovas, ISI-Flow Desk – 2000E – 2880 m³/h – 230 V Ištraukiamasis stalas, suvirinimo ir šlifavimo stalas su elektriniu aukščio reguliavimu ISI Flow Desk 2000 E yra reguliuojamo aukščio darbo stalas, skirtas nesprogstamųjų, sausų dulkių ir dujų ištraukimui. TECHNINIS APRAŠYMAS: Galima ištraukimo galia: 2880 m³/h Darbinis paviršius P/G mm: P 1990 / G 824 Darbinis aukštis mm: A 638–938 mm Ljdpfxszdtwzs Af Hjhk Stalo apkrova: 200 kg/m (medis, tolygiai paskirstyta apkrova) Darbo paviršius: medinės grotelės (pasirinktinai plieno, nerūdijančio plieno arba plastikinės grotelės) Bendri matmenys P/G/A mm: P 2000 / G 1100 / A 938 (pagal pageidavimą galima L = 1000/1500 mm) Ventiliatoriaus galia: be ventiliatoriaus Maitinimo įtampa: 1 x 230 V, 50 Hz Vamzdžio jungtis: D=251 mm Spalva: RAL 7042/RAL 7011 Svoris: 191 kg Panaudojimo sritis: Darbo stalas naudojamas nesprogstamųjų, sausų dulkių ir dujų ištraukimui. Stalas suprojektuotas tiek darbui stovint, tiek sėdint, visiškai užtikrinant vietą kojoms ir orientuojantis į ergonomiką. Darbo optimizavimui ištraukiamasis stalas siūlo daug papildomos įrangos: - Galinė, šoninės sienelės ir stogo dalis – pasirinktinai su garso izoliacija ir apšvietimu - Stalo grotelės iš medžio, plieno, nerūdijančio plieno arba plastiko - Perforuota plieninė plokštė ant medinių grotelių viršaus - Spaustuvo laikiklis - Laikiklis vamzdžių suvirinimui - Vietinis ištraukimo vamzdis Jūsų privalumai pasirinkus ISI-Flow Desk seriją: - Galima pasirinkti iš 12 modelių - Vamzdyno jungtis gali būti pasirinktinai iš dešinės, kairės pusės arba iš abiejų pusių - Elektrinis aukščio reguliavimas mygtuko paspaudimu - Platus papildomos ir prijungimo įrangos asortimentas - Europietiška kokybė ISI Air ištraukiamasis stalas negali būti naudojamas ATEX zonose. Nuotraukos gali rodyti papildomą įrangą.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 938 mm, bendras ilgis: 2 000 mm, bendras plotis: 1 100 mm, bendras svoris: 100 kg, Įranga: CE žymėjimas, Tipinė plokštelė prieinama, dokumentacija / vadovas, ISI-FLOW DESK Standard – 1000S – 1700 m³/h Ištraukimo stalas, tinkamas klijavimo, šlifavimo, poliravimo, suvirinimo arba rankinio pjovimo darbams ISI Flow Desk 1000 S yra paprastas standartinis darbo stalas, skirtas ne sprogių, sausų dulkių ir dujų ištraukimui. TECHNINIS APRAŠYMAS: Galima ištraukimo galia: 1700 m³/h Darbinis paviršius (plotis/gylis, mm): P 980 / G 960 Darbo aukštis (mm): A 638–938 Stalo apkrova: 150 kg/m (mediena, tolygiai paskirstyta apkrova) Darbinis paviršius: medinės grotelės (pasirinktinai – plieno, nerūdijančio plieno arba plastiko briaunos) Bendri matmenys (plotis/gylis/aukštis, mm): P 1076 / G 1000 / A 938 (galimos kitos matmenų konfigūracijos) Ventiliatoriaus galia: be ventiliatoriaus Vamzdžio jungtis: D = 161 mm Spalva: RAL 7042 / RAL 7011 Svoris: 100 kg Lsdpezdtquofx Af Hohk Pritaikymas: Darbo stalas skirtas ne sprogių, sausų dulkių ir dujų ištraukimui. Gali būti naudojamas klijavimo, šlifavimo, poliravimo, suvirinimo arba rankinio pjovimo darbams. ISI – Flow Desk serijos privalumai: - Galimos 8 įrenginių versijos - Paprastas prijungimas prie ištraukimo sistemos dėl ant stalo galo sumontuotos jungties - Stalo konstrukcija leidžia dirbti iš 3 pusių - Reguliuojamas aukštis - Platus priedų ir jungčių asortimentas - Europos gamyba ir kokybė ISI Air ištraukimo stalo negalima naudoti ATEX zonose.

Gamybos metai: 1990, būklė: visiškai atnaujintas (naudotas), Our top-seller! Ljdpfx Ae A Nbvjf Hshk Extremely dynamic short-circuit resistance, making it excellently suited for robust industrial applications with frequent switching operations, high electrical loads, and harmonic content. Durable tank construction. Reduced losses (Po/Pk between B-A' and A-C'). Available with Elastimold outer cone plug-in bushings, and of course also with porcelain bushings on HV/LV sides. The transformer always comes equipped with a dial thermometer with 2 contacts and a drag pointer, optional complete DGPT2 transformer protection upon request. Expansion tank version with double-float Buchholz relay available. Production series up to 35 units possible. 12-month warranty.

Būklė: naujas, mašinos/transporto priemonės numeris: G-CL-270-FN-EC-EX, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, tūrio srautas: 270 m³/val, triukšmo lygis: 61 dB, bendras aukštis: 755 mm, bendras ilgis: 400 mm, bendras plotis: 500 mm, bendras svoris: 60 kg, ISI G-CLEANER - ATEX Mechanical Air Filtration Unit (without intake plate / to be specified separately) Model: 270 FN Design: Mobile Control: none ATEX: "e" II 3 G Zone 2 Horizontal, mobile mechanical air purifier with EC radial fan for extracting gases in ATEX-rated hazardous areas. TECHNICAL DESCRIPTION: Airflow: - 320 m³/h (free-blowing) - 240-270 m³/h (effective) (depending on filter configuration, without extraction elements) Air Inlet: Exhaust sound enclosure at rear (optionally 1x100mm / 2x80mm / 4x50mm) Filter Configuration: - Coarse pre-filter, aluminum knitted mesh - Z-line filter F9 - Activated carbon cassette with pressed, specially impregnated shaped carbon ATEX: Group II Gas/dust Fan: according to ATEX II 2G Ex h IIB T4 Gb Temperature class: T4 > 135°C Fan: Equipment category 2 Filter system: Equipment category 3 All electrical components are supplied in explosion-protected design. Color: RAL 7035 light grey (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air volume: non-adjustable Sound level: 61 dB(A) Lhedpfx Asvrykhef Hsk Dimensions: Length 400 mm / Width 500 mm / Height 755 mm Weight: 60 kg

Būklė: naujas, mašinos/transporto priemonės numeris: S-CL-100-FN-EC, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, tūrio srautas: 134 m³/val, bendras aukštis: 475 mm, bendras ilgis: 250 mm, bendras plotis: 250 mm, bendras svoris: 17 kg, Įranga: Tipinė plokštelė prieinama, ISI S-CLEANER Mechanical air filtration unit (solder fume extraction) for up to 1 workstation Model: 100 FN Design: Semi-mobile (sliding skids/no wheels) Control: None Horizontally-oriented, semi-mobile mechanical air purifier with EC radial fan for extracting solder fumes. TECHNICAL DESCRIPTION: Air volume: - 134 m³/h (airflow) - 100 m³/h (effective air output) Ljdpfx Afowpu Tws Hehk (depends on filter configuration; without extraction arms) Inlet diameter: NW 50 mm (rear) Filter configuration: - Pre-filter - HEPA filter H13 - Refillable activated carbon cassette Colour: RAL 7035 light grey Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-efficient EC technology Air output: not adjustable Dimensions: Length 250 mm / Width 250 mm / Height 475 mm Weight: 16.5 kg

Būklė: naujas, mašinos/transporto priemonės numeris: G-CL-350-FR-EC, įėjimo įtampa: 230 V, tūrio srautas: 350 m³/val, triukšmo lygis: 61 dB, bendras aukštis: 600 mm, bendras ilgis: 430 mm, bendras plotis: 340 mm, bendras svoris: 40 kg, ISI G-CLEANER Mechanical Air Filtration Unit Model: 350 FR Version: Mobile Control: None Horizontal, mobile mechanical air purifier equipped with an EC radial fan for the extraction of gaseous substances. TECHNICAL SPECIFICATIONS: Airflow Rate: - 390 m³/h (free-blowing) - 350 m³/h (effective) (depends on filter configuration, without extraction elements) Air Inlet: Upper rear, with 4 connections (50 mm) Filter Configuration: - Pre-filter mat F5 - HEPA filter H13 according to DIN EN 1822-1 - Activated carbon cassette with 9 kg of specially impregnated, compressed shaped carbon Colour: RAL 7035 light grey (optional: special colour) Lhedpfx Aovrygpof Hsk Voltage: 230 V Frequency: 50 Hz Protection Class: IP54 Fan Technology: Energy-saving EC technology Airflow: Adjustable Noise Level: 61 dB(A) Dimensions: Length 430 mm / Width 340 mm / Height 600 mm Weight: 40 kg

Būklė: naujas, mašinos/transporto priemonės numeris: D-CL-440-FR-EC, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, tūrio srautas: 450 m³/val, triukšmo lygis: 58 dB, bendras aukštis: 1 430 mm, bendras ilgis: 450 mm, bendras plotis: 550 mm, bendras svoris: 50 kg, Įranga: Tipinė plokštelė prieinama, sūkių greitis be galo kintamas, ISI D-CLEANER Mechanical Air Filter Unit (Dust) Model: 440 FR Version: Mobile Control: None Horizontal, mobile mechanical air cleaner with EC centrifugal fan for the extraction of dust. TECHNICAL DESCRIPTION: Airflow: - 450 m³/h (free-blowing) (depending on filter configuration, without extraction arms) Air inlet opening: Baffle plate as pre-separator Suction nozzle: 100 mm (side left) Filter assembly: - Filter cartridge (dust class M according to DIN EN 60335-2-69 Annex AA) Lhsdpfx Afsvrxc Ao Hok - Compressed air cleaning via rotary nozzle Colour: RAL 7035 light grey (optional: special colour) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: adjustable Noise level: 58 dB(A) Dimensions: Length 450 mm / Width 550 mm / Height 1430 mm Weight: 50 kg

Būklė: naujas, mašinos/transporto priemonės numeris: S-CL-250-FN-EC, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, tūrio srautas: 250 m³/val, bendras aukštis: 600 mm, bendras ilgis: 340 mm, bendras plotis: 430 mm, bendras svoris: 35 kg, Įranga: Tipinė plokštelė prieinama, ISI S-CLEANER Mechanical Air Filtration Unit (Solder Fume) for up to 2 Workstations Model: 250 FN Version: Mobile Control: None Horizontal, mobile mechanical air cleaner with EC radial fan for solder fume extraction. TECHNICAL DESCRIPTION: Air Volume: - 240 m³/h (airflow rate) - 170 m³/h (effective air capacity) (depending on filter configuration, without extraction arms) Lsdpevrylfsfx Af Hshk Inlet Nozzles: 2 x DN 50 mm (rear) Filter Configuration: - Pre-filter G4 - HEPA Filter H13 - Activated Carbon Cartridge (2.5 kg, refillable) Colour: RAL 7035 light grey (optional: special colour) Voltage: 230 V Frequency: 50 Hz Protection Class: IP54 Fan Technology: Energy-efficient EC technology Airflow: non-adjustable Dimensions: Length 340 mm / Width 430 mm / Height 600 mm Weight: 35 kg

Būklė: naujas, mašinos/transporto priemonės numeris: C-CL-360-FR-EC, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, tūrio srautas: 390 m³/val, triukšmo lygis: 58 dB, bendras aukštis: 1 190 mm, bendras ilgis: 900 mm, bendras plotis: 550 mm, garantijos trukmė: 12 mėnesiai, Įranga: Tipinė plokštelė prieinama, ISI C-CLEANER Mechanical Air Filtration Unit Model: 360 FR Design: Mobile Control: None Horizontal, mobile mechanical air purifier with EC radial fan for the separation of gases and solids. TECHNICAL DESCRIPTION: Air Volume: - 390 m³/h (free-blowing) - 360 m³/h (effective) (depends on filter configuration, without extraction arms) Air Inlet: With impact plate as pre-separator Filter Configuration: - Filter cartridge made of polyester fleece (dust class M) - G4 pre-filter mat - H13 HEPA filter - Refillable activated carbon cassette with 3 kg To ensure consistent suction performance, the filter cartridge can be cleaned at regular intervals with compressed air via a ball valve. Color: RAL 7035 light grey (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection rating: IP54 Lhodpfx Asvrw T Hef Hek Fan technology: energy-saving EC technology Airflow: adjustable Noise Level: 58 dB (A) Dimensions: Length 900 mm / Width 550 mm / Height 1190 mm

Būklė: naudotas, Gamybos metai: 1979, 31,5 MVA galios transformatorius, 110 kV / 10,5 kV su pakopų perjungikliu (19 pakopų), su išsiplėtimo rezervuaru, Buchholz relė, oro sausintuvas, jungimo grupė Yy0, yra transformatoriaus dokumentacija. Lhederk Nrtopfx Af Hek

Gamybos metai: 2021, būklė: naujas, Air filter for indoor air purification of aerosols such as viruses, bacteria, pollen, dust ISI AIR CLEANER – adjustable up to 1600 m³/h – 230 V – for large rooms up to 160 m³ Airflow rate: adjustable up to 1600 m³/h Room size: suitable for up to 160 m³ Power consumption: 69 – 209 W Operating voltage: 230V 50/60Hz, 5m power cable with Schuko plug (EU4) (plug & play) Sound level*: 38.2 – 48.1 dB(A at 1 m) Dimensions L/W/H in mm: L 550 / W 660 / H 2000 Colour: Base: RAL 7016, Top: RAL 7035 Weight: 130 kg Manufacturer: ISI Industrieprodukte GmbH Scope of delivery: 1 ISI AIRCLEANER FT1 1 fine dust filter, ISO 16080 ePM1-90% 1 HEPA filter H14, EN1822 Delivery condition: ex works Buchholz (Westerwald), packaging only, immediately available Application scenario: Air purifiers have become widely known due to the Corona pandemic. However, air purifiers are generally recommended even outside of a pandemic, as they can significantly improve air quality. After a pandemic, pathogens such as influenza can still be present, especially during colder months. Asthmatics and allergy sufferers benefit year-round from filtered pollen and other allergens. How it works: Room air is drawn in at the bottom of the filter unit. In the pre-filter section, air is freed from dust and larger particles. With the highly efficient HEPA H14 filter system, particles and aerosols that may contain pathogens are removed from the air with an efficiency of up to 99.995%. Lhjdpfx Aoh Rfcnef Hok Your benefits: - Highly efficient EC fan as standard - Adjustable speed and airflow rate - Long service life and easy filter replacement - Low noise level - Separation efficiency up to 99.95% - Quality Made in Germany

Būklė: naujas, Gamybos metai: 2023, Extraction capacity at filter unit connection*: 2,600 m³/h (free intake) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 65 dB(A) Dimensions L/W/H in mm: L 9755 / W 508 / H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Lhodpeh Rdxnefx Af Hjk Special voltage or special colour available on request OPTIONAL: With pre-filter package Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil content) and smoke, suitable for small to very large machine workspaces | Oil mist separator Your benefits with the ELBARON series: - 18 device variants available - Directly from the manufacturer - ISI-TRONIC optional (digital filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available in simplex (single stage) or duplex (two stage) versions - Wide range of air performances available - Adaptable to pollutant load and required air flow - Large range of installation and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining processes with pure oil or for separation of oil mist and smoke (oil mist separators). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filtration units on the market and are in operation worldwide. Our filter units are already available with optional digitalisation and, for example, can be controlled via laptop. The ELBARON® device range includes 18 device variants and can be optimally sized and configured to match your application in terms of capacity and performance. ELBARON® units are characterised by long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve the best possible filtration efficiencies, long service lives, and trouble-free operation from an economic perspective.