Baka Egu-5020 So pirkti naudotą (6 134)

Būklė: naudotas, Gamybos metai: 2010, bendras ilgis: 3 220 mm, kėlimo aukštis: 195 mm, keliamoji galia: 5 000 kg, Šakės: vidinis atstumas 160 mm, išorinis atstumas 580 mm, šakių ilgis L=2400 mm, plotis B=210 mm, aukštis H=75 mm Codpfxjxdn A Ss Aa Deha

Būklė: naujas, Gamybos metai: 2009, bendras ilgis: 4 460 mm, kėlimo aukštis: 190 mm, keliamoji galia: 6 000 kg, Šakės L=3500mm, B=320mm, H=80mm, ik-ik 745mm, ak-ak 1380mm Cjdpfxexd Hwbs Aa Djha

Būklė: naudotas, Gamybos metai: 2016, bendras ilgis: 3 590 mm, kėlimo aukštis: 285 mm, keliamoji galia: 20 000 kg, Šakė L: 2200 mm, P: 500 mm, A: 120 mm. IK-IK 350 mm, AK-AK 1355 mm. Chodoxrvvvjpfx Aa Dja

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, veikimo valandos: 2 444 h, keliamoji galia: 6 000 kg, kuro tipas: elektrinis, Gamintojas + modelis: BAKA / GENKINGER EFU 60 - So ID: 26093.5385 Kategorija: naudotas Šakės: 1700 x 580 x 95 mm Keltuvė: 6000 kg Pagaminimo metai: 2021 Csdpfozrnz Rex Aa Dsha Darbo valandos: 2444 val. Akumuliatorius: 24 V / 460 Ah Papildoma įranga: BAKA / GENKINGER, sėdynė, elektrinis vairo stiprintuvas.

Būklė: naujas, Gamybos metai: 2019, bendras ilgis: 2 760 mm, kėlimo aukštis: 3 010 mm, keliamoji galia: 2 800 kg, Storage technology Baka EFV 2500 SO Cedpfxexd Hnao Aa Dsha Drive: Electric Year of manufacture: 2019 Lifting height (mm): 3,010 Load capacity (kg): 2,800

Būklė: naujas, didžiausias leistinas svoris: 9 500 kg, bendras svoris: 11 900 kg, ašių konfigūracija: 2 ašys, krovimo vietos ilgis: 5 000 mm, krovinių skyriaus plotis: 2 010 mm, krovos erdvės aukštis: 350 mm, bendras ilgis: 7 160 mm, bendras plotis: 2 550 mm, bendras aukštis: 3 250 mm, Gamybos metai: 2026, Įranga: ABS,

Gamybos metai: 2002, būklė: naudotas, Pallet truck, special high-lift pallet truck for tall pallets, pallet jack, hand pallet truck - Load capacity: 2,000 kg - Lowered height: 195 mm - Raised height: 320 mm - Fork length: 1,010 mm - Fork width (outside): 665 mm Chodpfxsb A H Twe Aa Dea - Fork width (inside): 345 mm - Net weight: 105 kg

Gamybos metai: 1991, būklė: naudotas, High lift pallet truck, pallet truck, forklift, pedestrian stacker, hand pallet truck, high lift truck, pedestrian forklift - Manufacturer: BAKA, High Lift Truck Type EGGT 69-1604 - Load capacity: max. 1600 kg - Lift height: 2250 mm - Overall height: 1670 mm Chodpfog N Tuwjx Aa Doa - Width: 870 mm - Length (without forks): 1630 mm - Forks: length 800 mm / 80 x 40 mm - Without battery: battery defective, can be replaced at extra cost - Dimensions: 2500/870/H1670 mm - Own weight: 2050 kg

Būklė: beveik kaip naujas (naudotas), rida: 270 000 km, kuro tipas: dyzelinas, emisijos klasė: Euro 5, Gamybos metai: 2011,

Būklė: naujas, Gamybos metai: 1999, bendras ilgis: 1 760 mm, kėlimo aukštis: 2 500 mm, keliamoji galia: 3 000 kg, Warehouse technology Baka FGY 3000 Cjdpfxoxd Hv Ro Aa Dsha Drive: Electric Year of manufacture: 1999 Lifting height (mm): 2,500 Load capacity (kg): 3,000

Būklė: naujas, Gamybos metai: 2012, bendras ilgis: 2 780 mm, Tractor Baka EFZ-5.0 Cedpfx Aasxd Ea Uo Doha Drive: Electric Year of manufacture: 2012

Būklė: naudotas, Gamybos metai: 1997, bendras ilgis: 2 960 mm, kėlimo aukštis: 235 mm, keliamoji galia: 4 000 kg, Warehouse technology Baka 1701-769 Drive: Electric Year of manufacture: 1997 Lift height (mm): 235 Cedpfx Ajxd Hp Roa Deha Load capacity (kg): 4,000

Būklė: naudotas, Gamybos metai: 2006, bendras ilgis: 3 780 mm, kėlimo aukštis: 225 mm, keliamoji galia: 10 000 kg, Sandėliavimo technika Baka EFU 10,0 Pavaros tipas: elektrinė Pagaminimo metai: 2006 Kėlimo aukštis (mm): 225 Keliamoji galia (kg): 10 000 Csdjxfl Saspfx Aa Djha

Būklė: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Hersteller: KALLFASS Modell: UNIVERSA 500, Baujahr 2010 Modell: Schrumpftunnel COMPACT 650 SO, Baujahr 2010 Chedsxnzlhopfx Aa Dja TECHNISCHE DATEN KALLFASS UNIVERSA 500 – vollautomatischer Seitenschweißer Querschweißbalken, Länge: 500 mm Produktfreihöhe: bis zu 200 mm Stromversorgung: 208 – 480 Volt Folienart, Halbschlauchfolie: 12 – 80 μm Transportgeschwindigkeit: 10 – 35 Meter/Minute Verpackungsleistung, max.: 85 Takte/Minute Technische Daten COMPACT 650 SO Tunnelöffnung, Breite: 650 mm Tunnelöffnung, Höhe, verstellbar: 100 – 400 mm Länge der beheizten Tunnelhaube: 1100 mm Luftstromregelung mit patentiertem Ringsystem: Standard Wartungsfreies Kunststoff-Transportband: Standard Transportgeschwindigkeit stufenlos einstellbar, frequenzgeregelt: ca. 10 – 35 m/min Leistung des Tunnelgebläses stufenlos einstellbar, frequenzgeregelt: Standard Energiesparende 2-stufige Beheizung mit Spezialisolierung in der Tunnelhaube: Standard Temperaturregelung mittels elektronischem Thermostat: Schaltgenauigkeit +/- 0,2° C Verschleißfreie und kontaktlose Temperatursteuerung: Standard Sicherheitseinrichtung gemäß EC-Maschinenrichtlinie EN 60204: Grenztemperaturüberwachung: Standard Arbeitshöhe, verstellbar: 800 – 900 mm Stromversorgung: 400 Volt, 50 Hz, mit Schutzleiter Heizleistung, installiert, 2-stufig schaltbar: 9,0 + 4,5 kW Nennleistung: 14,5 kVA Nennstrom bei 400 V: 21,0 A Gesamtanschlusswert: max. 37,0 A (inkl. zusätzlichem Drehstromanschluss) Position Schaltschrank und Bedienseite: links in Arbeitsrichtung

Būklė: naujas, Gamybos metai: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications – ENERGY SAVER SET INCLUDES: - LUFT 700 VSD+PM COMPACT SCREW COMPRESSOR with integrated dryer - 500 L horizontal compressed air receiver tank Key features distinguishing these models: 1. Permanent Magnet Motor Technology (PM) Most compressors from the Energy Saver series utilize Permanent Magnet motors. Unlike standard induction motors: - They achieve efficiency levels compliant with IE4 or even IE5 standards - They maintain high efficiency even at very low RPMs (standard motors lose efficiency outside their nominal range) - They are smaller, lighter, and generate less heat 2. Advanced Variable Speed Drive (VSD) Control At the heart of the Energy Saver line is the frequency inverter (VSD). - Demand-based adjustment: The compressor does not operate in an "all or nothing" (load/unload) system. If your machine only requires 30% output, the compressor will reduce speed, consuming proportionately less energy. - Idle running eliminated: Classic compressors often run for several minutes after the tank is filled, consuming around 25–30% of nominal power without producing air. Energy Saver models virtually eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these devices start smoothly from 0 Hz. This means there are no sudden current peaks at startup, which: - Protects your facility’s electrical installation - Allows for more frequent starts and stops without risking winding overheating Chsdpfx Aaeycg Ryj Dea 4. Real Savings In practice, the Energy Saver series allows you to cut electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable line pressure (accuracy of up to 0.1 bar), essential for precision tools such as laser cutters. Extended service life: The absence of sudden pressure and temperature spikes prolongs the screw stage’s lifespan. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Free air delivery 0-6 bar: approx. 690 L/min Free air delivery at 6 bar: 690 L/min Free air delivery at 8 bar: 650 L/min Free air delivery at 10 bar: 650 L/min Outlet connection diameter (G): 1/2" Dimensions: 1840 x 640 x 1470 mm Weight: 320 kg

Būklė: naujas, Gamybos metai: 2026, CORMAK LUFT 1500 VSD+PM Compact Screw Compressor with Dryer – a compact set for demanding applications – ENERGY SAVER SET INCLUDES: - LUFT 1500 VSD+PM COMPACT Screw Compressor with integrated dryer. - Horizontal 500 L Compressed Air Receiver. Key features that set these models apart: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series use Permanent Magnet motors. Compared to standard induction motors: - They provide efficiency levels compliant with IE4 or even IE5 standards. - Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range). - Are smaller, lighter, and generate less heat. 2. Advanced Variable Speed Drive Control (VSD) The heart of the Energy Saver line is the frequency inverter (VSD). - Demand-adaptive: The compressor does not work in a fixed "on/off" (load/unload) cycle. If your facility requires only 30% output, the compressor reduces RPM accordingly, consuming proportionally less energy. - Idle-running elimination: Conventional compressors often continue to run for several minutes after filling the tank, drawing about 25–30% of nominal power without producing compressed air. Energy Saver models almost completely eliminate this wasteful operation. 3. Soft Start Thanks to the VSD, these units start up smoothly from 0 Hz. This means no sudden current surges during start-up, which: - Protects your factory’s electrical installation. - Allows for more frequent start/stop cycles without risk of motor winding overheating. 4. Real Savings Chedpeychbaofx Aa Dea In practice, using the Energy Saver line enables reduction of electricity bills by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains a very stable network pressure (accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: the absence of sudden pressure and temperature fluctuations extends the lifespan of the screw stage. Technical specifications Motor power: 11 kW / 15 HP Voltage: 400V/50Hz Output at 0-6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet connection diameter (G): 1" Dimensions: 1600 x 740 x 1750 mm Weight: 500 kg

Būklė: naujas, Gamybos metai: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications - ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT Screw Compressor with integrated dryer. 270 L Horizontal Compressed Air Receiver Tank. Here are the key features that set these models apart: 1. Permanent Magnet Motor Technology (PM) Chodpfxoycg I Ss Aa Dea Most compressors in the Energy Saver series utilize Permanent Magnet motors. Unlike standard induction motors: They offer efficiency levels compliant with IE4 or even IE5 standards. Maintain high performance even at very low rpm (standard motors lose efficiency outside their nominal range). They are smaller, lighter, and generate less heat. 2. Advanced Inverter Control (VSD) The heart of the Energy Saver line is the frequency inverter (VSD). Demand-based operation: The compressor does not operate in a simple on/off (load/unload) mode. If your machine only requires 30% capacity, the compressor reduces its speed accordingly, consuming proportionally less energy. Idle run elimination: Classic compressors often operate for several minutes after the tank is full, using approx. 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process entirely. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means there are no sudden current surges during startup, which: Protects your facility’s electrical installation. Allows for more frequent start/stop cycles without the risk of winding overheating. 4. Significant Energy Savings In practice, using the Energy Saver line allows electricity bills to be reduced by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable network pressure (accurate to 0.1 bar), which is crucial for precise devices such as laser cutters. Longer service life: The absence of sudden pressure and temperature fluctuations extends the lifespan of the screw block. Technical specifications Motor Power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Output 0-6 bar: avg. 690 L/min Output at 6 bar: 690 L/min Output at 8 bar: 650 L/min Output at 10 bar: 650 L/min Outlet port diameter (G): 1/2" Dimensions: 1495 x 520 x 1340 mm Weight: 250 kg

Būklė: geras (naudotas), Hidraulinio aliejaus bakas, hidraulinio aliejaus talpykla, hidraulinis bakas Chodpfx Aehuk N Eja Dja -Hidraulinio aliejaus bakas: su grąžinimo filtru, slėgio reguliavimo vožtuvu ir alyvos lygio indikatoriumi -Filtras: EPE Eppensteiner, tipas RL601, P = 16 bar -Slėgio reguliavimo vožtuvas: Bosch. Bako matmenys: 1520/720/H435 mm -Bako talpa: 420 litrų -Matmenys: 1870/730/H1070 mm -Svoris: 278 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, Parduodame cinkuotą oro baką – 5000 l. Gamintojas – OKS Otto Klein GmbH. Maksimalus darbinis slėgis – 11 bar. Pagaminimo metai – 2019. Matmenys: Cedpfx Aajzrmk De Deha Skersmuo – 1400 mm. Aukštis – 3570 mm. Svoris – 1050 kg. Oro bakas su techniniu pasu. Oro bakas su armatūra – apsauginiu vožtuvu, manometru + flanšais. Oro bakas, slėginis indas.

Būklė: naudotas, Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, Naudotas talpyklos bakas / kuro bakas Statinis Talpa: 40 000 l Chsdpozq U U Uofx Aa Dsa Atitinka DIN 6616 D standartą, dvigubos sienelės Išvalytas ir išjungtas

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, keliamoji galia: 2 600 kg, Dvigubų palečių kėlimo šakės Naudingosios apkrovos centras: 600 ISO klasė: ISO klasė 3 = 2 500–4 999 kg Būklė: paruošta naudoti, visiškai veikianti Chsdjzmbutspfx Aa Dsa Techninė būklė: gera Aprašymas: • Pagaminimo metai: 2020 • ISO 3A (51 cm) • Keliamoji galia: 2600 kg • Šoninis poslinkis • Atidarimo diapazonas: 560–1940 mm • Plotis: 1200 mm • Šakių ilgis: 1200 mm • ID: OS2081

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, keliamoji galia: 2 600 kg, Dvigubo padėklo šakė Naudingosios apkrovos centras: 600 ISO klasė: ISO klasė 3 = 2 500–4 999 kg Būklė: paruošta naudoti, visiškai veikianti Techninė būklė: gera Chodpfxozl Iwfs Aa Doa Aprašymas: Gaminta 2020 m. ISO 3A (51 cm) Talpa 2600 kg Šoninis poslinkis Atidarimo diapazonas 560–1940 mm Plotis 1200 mm Šakių ilgis 1200 mm ID OS2080

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, keliamoji galia: 2 600 kg, Dvigubos platformos šakės Naudingosios apkrovos centras: 600 ISO klasė: ISO klasė 3 = 2 500–4 999 kg Būklė: paruoštas naudoti, visiškai veikiantis Chedpfxszl Iv Ij Aa Dea Techninė būklė: gera Aprašymas: Gamintojas: 2020 m. ISO 3A (51 cm) Keltuvės talpa: 2600 kg Šoninis poslinkis Atidarymo diapazonas: 560–1940 mm Plotis: 1200 mm Šakių ilgis: 1200 mm ID: OS2078

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, keliamoji galia: 2 600 kg, Dvigubo padėklo šakės Naudingosios apkrovos centras: 600 ISO klasė: ISO klasė 3 = 2500–4999 kg Būklė: pasirengęs naudoti, visiškai veikiantis Techninė būklė: gera Aprašymas: * Gamybos metai: 2020 * ISO 3A (51 cm) * Keliamoji galia: 2600 kg * Šoninis poslinkis * Atidarimo diapazonas: 560–1940 mm * Plotis: 1200 mm * Šakių ilgis: 1200 mm Codpfx Aaozl Ivze Doha * ID OS2077

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, keliamoji galia: 2 600 kg, Dvigubų padėklų griebtuvas Naudingosios apkrovos centras: 600 ISO klasė: ISO klasė 3 = 2 500–4 999 kg Būklė: paruoštas naudoti, visiškai veikiantis Techninė būklė: gera Aprašymas: * Pagaminimo metai: 2020 Chedpfezl Ivuex Aa Doa * ISO 3A (51 cm) * Kėlimoji galia: 2600 kg * Šoninis poslinkis * Atidarimo diapazonas: 560–1940 mm * Plotis: 1200 mm * Šakių ilgis: 1200 mm * ID OS2076