Atlanta Mit Drehteller 2200Mm Synthesi 200% Vorreckung pirkti naudotą (26 628)

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base Frame / Ø 2,200 mm Max. pallet size: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upwards/downwards Acoustic signal at wrapping start and at cycle end Emergency stop switch according to CE regulations Turntable always stops at the same starting position Anti-fall device for the film carriage Push button for machine power-on, start & stop function, and reset per CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 - Display/program lock F02 - Continuously variable turntable speed 5-12 rpm Carriage travel speed upwards and downwards adjustable independently F03 - Carriage travel speed upwards from 1.3 to 5.4 m/min F04 - Carriage travel speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 wraps) F06 - Number of wraps at pallet top (1 - 10 wraps) F09 - Photoelectric cell delay for wrapping height Bsdpfxoykub Aj Ag Iewt F13 - F16 - Film application tension for bottom & top wraps / ascent & descent adjustable independently F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 programmable wrapping cycles F01 - 1 - Cross wrapping (upwards/downwards) F01 - 2 - Single wrapping (upwards only or downwards only) F01 - 3 - Push button for manual functions F10 - F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to a preset height (disables height detection photoeye) F22 / F23 - Wrapping cycle for top sheet application F29 - Soft start cycle for corner protection F30 - F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet corners Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button Optional: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Mounting frame Photoelectric sensor for dark products Film cutting device etc. Further systems available ex-stock Ludwigsburg. Images may contain optional extras subject to surcharge. Image similar

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S23SynthesiLow04, Demonstration machine, as new. SYNTHESI with a flat turntable Turntable height: 25 mm Short ramp: 500 mm long Bjdpfx Asykucmog Iswt Manual rope formation at the pallet, mounted to the frame, for reinforcement of the wrapping TECHNICAL DETAILS: Turntable LOW PROFILE · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height sensing via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed, independent adjustment for up and down movement Acoustic signal at start of wrapping and end of cycle Emergency stop switch according to CE regulations Turntable always stops at the same start position Anti-fall protection for the film carriage Push buttons for machine power, start & stop function, and reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All functional parameters adjustable via display F00 – Display lock for program modification F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward: 1.3 to 5.4 m/min F04 – Carriage speed downward: 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photoelectric sensor delay for wrapping height F13–F16 – Film tension for foot & head wrapping / upward & downward individually adjustable F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01–1 – Cross wrapping (up/down) F01–2 – Single wrapping (only up or only down) F01–3 – Push button for manual functions F10–F11 – Wrapping cycle with specified start and stop height F12 – Wrapping to a preset height (with photoelectric height sensor deactivated) F22 / F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for attaching edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motor-driven rope formation (optional) Reinforcement cycle activated by push button FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film lay-on tension electronically controlled via control unit Film specifications: Max. outer diameter Ø250 mm – Height = 500 mm – Core Ø76 mm Standard connection data: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Sprocket for OPRS pre-stretch ratio 150% / 250% / 300% possible Additional systems available from Ludwigsburg stock.

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height: 25 mm Short ramp: 500 mm long TECHNICAL DETAILS: LOW PROFILE turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · Ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed up/down Acoustic signal at the start of wrapping and at the end of the cycle Bedpfx Aoykuiaog Iowt Emergency stop switch in accordance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Pushbutton for machine power-on as well as start & stop function & reset in accordance with CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE CONTROL PANEL All functional parameters adjustable via display F00 - Display lock for program changes F02 - Infinitely variable turntable speed 5-12 rpm Carriage speed up and down can be set independently F03 - Carriage speed up from 1.3 to 5.4 m/min F04 - Carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps at the pallet base (1 - 10 wraps) F06 - Number of wraps at the pallet top (1 - 10 wraps) F09 - Photo sensor delay for wrap height F13 - F16 - Film tension for base & top wrapping / ascent & descent, independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAP PROGRAMS AT THE CONTROL PANEL 6 storable wrapping programs F01 - 1 - Cross wrap (upwards/downwards) F01 - 2 - Simple wrap (upwards only or downwards only) F01 - 3 - Pushbutton for manual functions F10 - F11 - Wrapping cycle with pre-set start and stop height F12 - Wrapping to a stored height (disabling light sensor for height) F22 / F23 - Wrapping cycle for top sheet film F29 - Soft start cycle for applying edge protection F30 - F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing at sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via pushbutton FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Film tension electronically controlled via control unit Film specifications: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection values: 230 V - 1PH+N+PE - 50/60 Hz Total power: 1.2 kW / 8A Optional: Gears for OPRS pre-stretch ratio of 150% / 250% / 300% available Further machines available from stock in Ludwigsburg.

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25MythoSarya05, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level access for pallet trucks and electric pallet jacks MAST VERSION Bwsdpfx Ageykuh Ns Ijt Wrapping height 2,450 mm 99 programs 7" TOUCH display FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% pre-stretch, optionally with more or less pre-stretch available TURNING TABLE / TP Ø1,650 mm / Opening at 6 o'clock - Mast at 12 o'clock (can be adjusted at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Mixer-grinder / Meat Mincer Kolbe MWE-32 In good used and fully functional condition. Belt and motor are new. The unit operates on 400 volts, is fully made of stainless steel, comes with mixing paddle, 98 cm Enterprise, workshop tested, ready for immediate use. Loading FD 200, year of manufacture 2009. The machine itself is year 2007. Further details on request. Bwjdpfxowcgr Es Ag Iot Payment by cash or prepayment. Sale only to commercial buyers. No warranty, no guarantee.

Gamybos metai: 2021, veikimo valandos: 10 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S21MythoEasyLow04, Ex-demo machine – like new. MYTHO EASY Low Very low-profile design Wrapping height: 2400 mm Turntable: 1650 mm LP flat turntable, 30 mm low profile – 500 mm long Max. load weight: 1200 kg PowerStretch 200%; gear changeable to 150-200-250% Automatic adjustable double-rope formation – see photos. Automatic film cutting Bedpfxex Ta Nxo Ag Iswt Optional: Film clamp on turntable German Schuko plug 6 individually programmable settings Further demonstration units available from stock for immediate delivery. Prices ex stock Ludwigsburg

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S23NEOS06, Demonstration unit: ATLANTA NEOS stretch wrapper ARYA system for automatic film blowing and cutting. 99 individually storable programs Includes 1 remote control – additional units available as an option Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any doorway) Film power stretch 120-400% Motorized pre-stretch system with stepless adjustment Pre-stretch ratio adjustable via control panel from 120 to 400% Film tension electronically controlled via control unit Quick-change system (IEF) for easy film roll replacement Film specifications: Max. external diameter Ø300 mm – height = 500 mm – core Ø76mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series At least 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height “machine with mast” (pallet included) 2,150 mm Bwedoyktv Sjpfx Ag Ist Height detection by photoelectric sensor or by entering dimensions on display Protective bar for emergency stop Emergency stop switch according to CE regulations Acoustic warning signal and warning light during machine start-up Anti-drop safety device for film carriage Push-buttons for start & stop Machine operation according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All functional parameters adjustable via display - Display lock for program change - Adjustable machine rotation speed around the pallet up to 80 m/min - Carriage ascent and descent speed independently adjustable • Carriage ascent speed: 1.3 to 5.4 m/min • Carriage descent speed: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 wraps) - Number of wraps at pallet top (1–10 wraps) - Setting the pallet wrapping height - Film tension for bottom/top wraps and carriage ascent/descent independently adjustable - Film pre-stretch for bottom/top wraps and carriage ascent/descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrap (upward/downward) - Simple wrap (upward or downward only) - Wrapping cycles with predefined start and stop heights - Wrapping to a preset height (ignoring the photoelectric sensor) - Wrapping cycle for large pallet dimensions - Wrapping cycle for top sheet application - Soft-start cycle for edge protection installation - Wrapping cycle with reinforcement and adjustable number of wraps Soft-start to prevent film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Additional units are immediately available from our Ludwigsburg stock. #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Gamybos metai: 2025, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level access for pallet trucks and electric pallet jacks MAST VERSION Wrapping height 2,450 mm Bsdpsyktrtsfx Ag Iewt 99 programs 7" TOUCH display FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% pre-stretch, optionally with more or less pre-stretch available TURNING TABLE / TP Ø1,650 mm / Opening at 6 o'clock - Mast at 12 o'clock (can be adjusted at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level access for pallet trucks and electric pallet jacks MAST VERSION Wrapping height 2,450 mm Bedpeykud Rsfx Ag Iowt 99 programs 7" TOUCH display FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% pre-stretch, optionally with more or less pre-stretch available TURNING TABLE / TP Ø1,650 mm / Opening at 6 o'clock - Mast at 12 o'clock (can be adjusted at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Būklė: labai geros būklės (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, šlifavimo ilgis: 350 mm, šlifavimo plotis: 160 mm, įvesties srovės tipas: trifazis, bendras svoris: 740 kg, sukimosi greitis (maks.): 2 900 aps./min, galia: 1 kW (1,36 AG), įėjimo įtampa: 200 V, disko skersmuo: 250 mm, Įranga: dokumentacija / vadovas, Manufacturer: Mitsui MGG CO.LTD Model: MSG-200M Bwjdpewvf Hbjfx Ag Iet Year of manufacture: 1991-4 Maximum grinding width: 160 mm Maximum grinding length: 350 mm Maximum longitudinal table travel: 360 mm Maximum cross table travel: 200 mm Table movement per handwheel revolution: 3 mm/rev Grinding spindle speed: 2900 rpm, 50 Hz Standard grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speed: 2900 rpm, 50 Hz Grinding wheel bore diameter: 31.75 mm Electric power: 2 HP, 1 kW, 4-pole, 200 V, 3-phase Weight: approx. 740 kg

Būklė: naudotas, Profesionali matavimo plokštė iš granito – žinoma Mitutoyo / Planolith kokybė (pagaminta Vokietijoje). Idealiai tinka kokybės kontrolei, įrankių dirbtuvėms bei metrologijai. Parametrai: • Stalo matmenys: apie 1200 x 800 mm • Storis: apie 170 mm • Svoris: apie 460 kg • Tikslumo klasė: DIN 876/0 (didelis tikslumas) • Leistinas nuokrypis: 0,009 mm • Faktinis nuokrypis: 0,00273 mm • Gamintojas: Planolith GmbH / Mitutoyo • Pagaminimo šalis: Vokietija Bsdpjyw Ubqefx Ag Ijwt • Komplekte: tvirta plieninė bazė Privalumai: • Labai aukštas matavimo tikslumas • Stabili konstrukcija – sunkus granitas slopina vibracijas • Puikiai tinka matavimams, ženklinimui, detalių kontrolei • Profesionalus įrenginys • Paruošta darbui Būklė: Naudotas gaminys – yra įprastų naudojimo žymių (matomi įbrėžimai ant paviršiaus), tačiau visiškai veikiantis ir išlaiko visas eksploatacines savybes.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Pasukamosios velenos frezavimo staklės KÖLLE F 45 puikios būklės, staklės iš surinkimo įmonės, pastaraisiais metais nebuvo naudojamos viskas veikia puikiai visi guoliai ir kreipiančiosios yra geros būklės, staklės veikia labai sklandžiai pagaminimo metai: 1990 su valdymo pultu viršuje frezavimo atramoje abiejų atramų žandikauliai gali būti reguliuojami gylio atžvilgiu, su smulkiu reguliavimu ir skale, todėl galima atlikti ir apdailos darbus, pavyzdžiui, apdorojant sujungiamąjį profilio kraštą. Visa frezavimo atrama taip pat gali būti visiškai reguliuojama gylio atžvilgiu su reguliavimo ratu ir sriegiu, todėl galima atlikti labai tikslius ir greitus nustatymus. su AIGNER integraline atrama su velenos fiksacija per svirtį drožlės gali būti labai gerai pašalinamos, su 2 įsiurbimo antgaliais, 125 mm frezavimo atramoje ir 100 mm ant staklių stalo su 30 mm velena, kuri gali būti bepakopiai pasukama nuo -5 iki 45°, velena pasukama elektriniu būdu su labai tiksliu indikatoriumi, smulkų nustatymą galima atlikti rankiniu būdu su rankiniu ratu aukščio reguliavimas taip pat atliekamas elektriniu būdu, o smulkiam nustatymui taip pat yra rankinis ratas su dešiniojo / kairiojo sukimosi funkcija stakles mes asmeniškai pristatysime ir demonstravesime visoje Vokietijoje už 220,00 eurų, todėl pirkdami neprisiimsite jokios rizikos, siuntimas į Austriją ir likusią ES dalį taip pat galimas pagal užklausą su didele stalo anga 375 mm, kurią galima sumažinti naudojant įvairius žiedus (todėl galima naudoti ir labai didelio skersmens frezas, taip pat saugiai frezuoti mažomis frezomis) su 3000, 4000, 5000, 6000, 8000 ir 10000 aps./min. stalą sudaro didelio standumo pilkasis ketaus staklėse yra 30 mm velena, taip pat galima įmontuoti ir kitą veleną labai tvirta ir ilgaamžė konstrukcija, staklės buvo sukurtos sunkiems frezavimo darbams, jos tinka visiems frezavimo darbams optimalus galios perdavimas per klininį diržą su instrukcija su 3 ritiniais padavimo įrenginiu HOL HER, tipas ET 117 padavimo įrenginys turi dešiniojo / kairiojo sukimosi funkciją ir 8 greičius, padavimo ritiniai yra atskirai montuojami ir visi yra naujos būklės staklių stalo gylis yra 1000 mm, o plotis - 1200 mm, jis turi ištraukiamą papildomą atramą, kurios ilgis yra 1200 mm su staklėmis galima iš karto pradėti dirbti 380 V, 4700 ir 5700 W dėl 2 greičių su visomis reikalingomis apsaugos priemonėmis, variklio stabdžiu ir avariniu išjungikliu, staklės yra patvirtintos „Holz-BG“, jos turi GS sertifikatą staklių svoris apie 1000 kg Bsdpfjzt Ai Esx Ag Ijwt su variklio apsauginiu jungikliu nuo perkrovos profesionalus įrenginys, ne pigus iš prekybos centro optimalus, paprastas, greitas ir saugus valdymas

Būklė: geras (naudotas), Oxy-fuel cutting device with turntable, ideal for welding bevel cutting. Turntable diameter: 285 mm; maximum cutting diameter: 600 mm; total height: 1,150 mm; width: 900 mm; depth: 500 mm. Bodpfed Dti Isx Ag Iswt

Būklė: labai geros būklės (naudotas), Buderus GE315/200 kW low-temperature boiler with oil burner Bwodpfx Agjwauare Ijt

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, „HOFFMANN HT 200“ – gręžtuvas su tvirtinimo įtaisais ir įrankiu, skirto ilgų skylių gręžimui Bwedpfx Agoyy Rtzo Ist puikios būklės, įranga iš švietimo įstaigos, naudota nedaug, beveik nauja, turi labai nedaug naudojimo žymių. Šia įranga galima frezuoti ilgas skyles ir gręžti skyles tvirtinimo įtaisams. Gręžimo aukštį galima labai tiksliai nustatyti skaitmeniniu indikatoriumi. Komplekte yra 3 grąžtų laikikliai: grąžtams su M10 išorine sriegiuote ir grąžtams, kurių kotas yra 12 mm ir 16 mm. Su papildomomis atramomis, esančiomis kairėje ir dešinėje, kurias galima pasukti ir kurios turi guolinį volelį. Įrangoje yra važiuoklė. Su 2 kampiniais stabdikliais ant įrangos stalo, skirti kairiajai ir dešiniajai pusei. Spaustuvai yra reguliuojami ir perkeliama. 380 V, 1400 ir 1800 W, dėl 2 greičio diapazonų. 1400 ir 2850 aps./min. Pagaminimo metai: 1994. Svoris: apie 280 kg. Šia įranga galima frezuoti ilgas skyles, pavyzdžiui, užraktų dėžėms ir panašiems elementams, arba gaminti visų tipų rėmų jungtis tvirtinimo įtaisais, stačiu kampu, tiesiai ir kampiniu būdu. Idealiai tinka tvirtinimo įtaisų jungčių gamybai medinių rėmų konstrukcijose, baldų, durų, langų ir laiptų gamyboje bei panašiems darbams. Gręžimo įrenginys gali būti pasuktas abiem pusėmis iki 65°, o esant 0° kampui yra fiksavimo sistema, todėl šia įranga galima lengvai įgręžti turėklų strypus į laiptų šonus. Dėl 2 greičio diapazonų galima naudoti grąžtus su dideliu skersmeniu, nepažeidžiant įrankio gręžimo metu. Dėl fiksavimo sistemų ir stabdiklių bei įrangos konstrukcijos, tvirtinimo įtaisų jungtys gaminamos greitai, todėl įranga yra labai ekonomiška. Įrangai reikia suspausto oro tiekimo, 6 bar (oro sunaudojimas yra labai mažas). Sukasi į dešinę. Labai gerai ir švariai frezuoja ir gręžia. Darbo detalė tvirtinama 2 pneumatiniais cilindrais, valdomais kojiniu pedalу. Dėl linijinio lazerio, esančio viršuje, galima greitai ir tiksliai gręžti pažymėtas skyles ir nustatyti kampą. Su tikslios 12 mm fiksavimo linija, kurioje yra vidurinė fiksavimo sistema ir 13 fiksavimo taškų kairėje ir dešinėje. Darbo spindulys: maks. 330 mm. Maks. skylės aukštis yra 90 mm. Maks. skylės gylis yra 200 mm su stabdikliu. Maks. darbo detalės aukštis yra 150 mm. Viskas veikia puikiai. Su instrukcija. Įrangą pristatysime ir parodysime asmeniškai visoje Vokietijoje už 220,00 eurų. Taip pat galimas pristatymas į Austriją ir kitas šalis (kaina pagal susitarimą), todėl pirkdami nepatirsite jokių rizikų. Įrangos stalas yra 1100 mm pločio ir 250 mm gylio. Profesionali įranga, ne iš statybų parduotuvės. Šia įranga galite iš karto pradėti dirbti. Labai stabili ir patvari konstrukcija. Tikslūs kreipiamieji, su rutuliniais guoliais, veikia gerai ir lengvai, sukamasis mechanizmas taip pat veikia labai lengvai dėl rutulinio guolio, fiksavimas užtikrinamas fiksavimo varžtu.

Būklė: naudotas, Gamybos metai: 2013, veikimo valandos: 3 000 h, Funkcionalumas: nepatikrintas, X ašies eiga: 3 000 mm, Y ašies eiga: 1 500 mm, For sale as a complete package: Waterjet cutting machine STM 3015, year 2013, with computer from 2018, including 3 network licenses for IGEMS software. Working area: 3000x1500 mm. High-pressure pump Ecotron 40.37, year 2013. Water softening system, year 2018, like new. Abrasive backflush system, year 2013. Abus column-mounted slewing crane, 2t, year 2018, like new. Bwodpfxoyq Rdyj Ag Iet Devo-Tech vacuum lifting system, load capacity 1800 kg, like new. Various accessories and sandbags. The system was purchased at the end of 2018 and commissioned at the beginning of 2019. At that time, the waterjet system and pump were fully overhauled by the supplier. Unfortunately, the cutting system was hardly used by us. It only ran a few hours per year. It has not been in operation since around July 2025. The high-pressure pump has a defect. It is not tight and is leaking water. Both high-pressure cylinders have been replaced in recent years. The last service was in 2025. According to the service technician, repairing the pump would cost approx. CHF 5,000 to 6,000. The crane system and vacuum unit can also be purchased separately. Please submit your offer with a price expectation. The new price for the crane and vacuum unit in 2019 was approx. CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please register or submit offers by email, not by phone.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, galia: 5,5 kW (7,48 AG), pjovimo aukštis (maks.): 200 mm, pjūklo disko skersmuo: 520 mm, sukimosi greitis (min.): 2 800 aps./min, pjovimo ilgis (maks.): 420 mm, ruošinio aukštis (maks.): 200 mm, padavimo ilgis X ašis: 420 mm, ilgio ribotuvas: 8 800 mm, slėgis: 5 juosta, vietos reikalavimas ilgis: 8 800 mm, reikalingas plotis: 1 200 mm, Įranga: dvipusis, Mobilus pjūklų pagrindas; bendras ilgis apie 8600 mm, skirtas Graule ZS 200 pjūklui; kreipiamoji ritininė linija kairėje pusėje 5200 mm, matavimo ilgis nuo 400 iki 5960 mm, su skaitmeniniu LED matmenų rodmeniu, matavimo ilgis su ištraukiamu antstatu apie 8800 mm. Pjūklų pagrindas su 6 rankinėmis atramomis užtikrina stabilų stovėjimą darbo metu. Su elektriniu maitinimo paskirstymu ir triguba 230 V kištukinių lizdų jungtimi. Mobilus pjūklų pagrindas Beck ESF 1, pjūklas ZS 200 sumontuotas ant pagrindo. Bedpfjv Hhg Tex Ag Iewt

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, Technical Data: Maximum clamping force: 3500 kN Maximum locking force: 3850 kN Opening stroke: 725 mm Minimum mould installation height: 400 mm Maximum mould installation height: 900 mm (extended) Clamping plate (h x v): 1168 x 1144 mm Clear tie-bar spacing (W x H): 830 x 830 mm Maximum mould weight: 6600 kg Maximum weight on moving clamping plate: 3800 kg Maximum weight on fixed clamping plate: 5100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Ejector maximum speed: 270 mm Screw diameter: 60 mm Injection pressure: 2426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle travel: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed barrel heating: 23.1 kW Material hopper capacity: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year: 2023 Stroke: 2000 mm Speed: 3.5 m/s Horizontal demoulding stroke Y-axis: 900 mm Vertical demoulding stroke X-axis: 1800 mm Robot console on fixed clamping plate Gripper function R1 (C-) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: Special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle, without mixing element and without check valve; • Interface (communication, emergency stop interface); • Software with function overview pages for MuCell control; • Adapted nozzle space guard; • High-speed servo-controlled screw (analog ZE388) Conveyor: Width: 870 mm Bsdpfx Ajy Hmfyjg Iswt Usable width: 800 mm Length: 3500 mm Height: 880–1220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Tunnel clearance height: 500 mm This injection moulding machine is fully equipped! Condition: As new, only 5,290 operating hours.

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S22EVA_07, Demonstration machine - like new. EVA Base frame raised by 150mm - 200mm, for loading with electric pallet truck or forklift - height adjustable Turntable diameter: 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet): 2,200 mm Bwjdoykuhcspfx Ag Iot Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed, adjustable up/down Acoustic signal at wrapping start and stop at end of cycle Emergency stop switch in accordance with CE regulations Turntable always stops at the same home position Anti-drop protection for film carriage Push buttons for machine power-on as well as start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All functional parameters adjustable via display F02 - Continuously adjustable turntable speed 5-12 rpm Carriage speed for up and down travel adjustable independently F03 - Upward carriage speed from 1.3 to 5.4 m/min F04 - Downward carriage speed from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 wraps) F06 - Number of wraps at pallet top (1 - 10 wraps) F09 - Setting for pallet wrapping height F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - Cross-wrapping (upward/downward) F01 - 2 - Simple wrapping (up or down only) F01 - 3 - Manual wrapping F12 - Wrapping to a predefined height (disables photoelectric sensor) F29 - Soft-start cycle for application of edge protectors Soft-start function reduces film breakage on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manually adjustable brake roller on the film carriage Film specification: Max. external diameter Ø 250 mm - Core Ø 76mm - Height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 Hz Total power: 1.2 kW / 6A Additional units available from stock for immediate delivery.

Būklė: naudotas, Gamybos metai: 2017, Technical details: Operating pressure: 12 bar Bwedpfx Agevvvrps Ist Tank capacity: 200 l Total weight approx.: 220 kg Dimensions (L x W x H): 1.2 x 1.1 x 1.8 m Mobile pressure blasting vessel – sandblasting unit Blasting vessel pressure up to 12 bar Test pressure 17.2 bar Fully equipped with: - Remote control valve - Remote control lever - Electro-pneumatic remote control - Carbide spray nozzle including 10 m nozzle hose inner diameter

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: S23Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height detection via photo sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed up/down Acoustic signal at wrapping start and end of cycle Emergency stop switch in accordance with CE regulations Turntable always stops at the same home position Fall protection for the film carriage Pushbuttons for machine ON, start & stop function, and reset per CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA OPERATOR PANEL All function parameters adjustable via display F00 - Locking of display to prevent program changes F02 - Steplessly adjustable turntable speed 5-12 rpm Carriage speed for upward and downward movement adjustable independently F03 - Carriage upward speed from 1.3 up to 5.4 m/min F04 - Carriage downward speed from 1.3 up to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 wraps) F06 - Number of wraps at pallet top (1 - 10 wraps) F09 - Delay for photocell wrapping height F13 - F16 - Film tension for bottom & top wraps / ascent & descent adjustable independently F62 - Ergonomic height for film exchange Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS VIA OPERATOR PANEL 6 wrappable programs can be stored F01 - 1 - Cross wrapping (up/down) Bedpfx Ageykudde Ijwt F01 - 2 - Simple wrapping (only up or only down) F01 - 3 - Pushbutton for manual functions F10 - F11 - Wrapping cycle with pre-set start and stop height F12 - Wrapping to a stored height (with height sensor deactivated) F22 / F23 - Wrapping cycle for top cover foil F29 - Soft start cycle for application of corner protection F30 - F31 - Wrapping cycles with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet corners Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle by pushbutton FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on film carriage Film spec: max. outer diameter Ø 250 mm - core Ø 76 mm - height = 500 mm Standard connection: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A Optional: FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200 % Turntable size up to Ø2600 mm Mast height up to 3900 mm Ramp Mounting frame Photo sensor for black products Film cutting device etc. Further machines available from Ludwigsburg stock. Images may include options subject to additional charge.

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25SFERA06, Mobile Stretch Wrapper ATLANTA SFERA Easy *Leasing available // from €180.51/month for 48 months with €0 down payment TECHNICAL DETAILS: - Two maintenance-free AGM batteries 12 V – 100 Ah connected in series - 160 pallets per charge – Charging time: 8–10 hours - High-frequency battery charger with LED indicator - Wrapping height “Machine with mast (pallet included) 2,000 mm; optionally up to 2,400 mm - Height detection via photoelectric sensor or input via display - Safety bar for emergency stop of the drive Bjdsykua Sspfx Ag Ijwt - Emergency stop switch in accordance with CE regulations - Audible warning signal and warning light at machine startup - Fall protection system for the film carriage - Pushbutton for start & stop - Machine functions according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL: - All function parameters can be set via display - F00 - Display/programming lock - F02 - Adjustable machine speed around the pallet up to 80 m/min - Carriage speed for ascent and descent can be set independently - F03 - Carriage ascent speed from 1.3 to 5.4 m/min - F04 - Carriage descent speed from 1.3 to 5.4 m/min - F05 - Number of wraps at pallet base (1 - 10 wraps) - F06 - Number of wraps at pallet top (1 - 10 wraps) - F09 - Setting of pallet wrapping height - F13 - F16 - Film tension at base and top wrap / ascent and descent adjustable independently - F17 - F20 - Film pre-stretch at base and top wrap / ascent and descent independently adjustable - F62 - Ergonomic height for film change - Film usage display (option for PRS – PS) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL: - 6 storable wrapping programs for SFERA EASY - F01 - 1 - Cross wrap (up/down) - F01 - 2 - Simple wrap (upwards or downwards only) - F10 - F11 - Wrapping cycle with specified start and stop height - F12 - Wrapping to a preset height (with deactivation of height sensor) - F21 - Wrapping cycle for large pallets - F22 / F23 - Wrapping cycle for top cover film - F29 - Soft-start cycle for application of edge protection - F30 - F31 - Wrapping cycle with reinforcement and adjustable wrap count - Soft-start function to reduce film tears on sharp pallet edges - Wrapping cycle with manual or motorized rope formation (optional) FILM CARRIAGE TYPE "FM" WITH MECHANICAL BRAKE - Brake manually adjustable via tension roller on carriage - Film specification: max. outer diameter Ø 250 mm - core Ø 76 mm - height = 500 mm - Option: Stretch film with core Ø 50 mm or coreless stretch film - Standard power requirements: 230 V - 1L+N+PE - 50 Hz Options available: - Wrapping height up to 2,400 mm - FILM CARRIAGE TYPE "FE" (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" 200% - FILM CARRIAGE TYPE "PRS" (POWER ROLLER STRETCH) 200% - FILM CARRIAGE TYPE "PS" (POWER STRETCH) 120-400% - Automatic rope formation for reinforced wrapping - Automatic system for cutting film into 3 strips for “BANDEROLL WRAPS” - Machine configuration for temperatures down to -5° C - BATTERIES LITHIUM RELION 2 x 12V - Automatic cutting unit (FE, PRS & PS) Additional machines available from stock Ludwigsburg. Image for reference only.

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: S23SFERA05, Mobile Stretch Wrapper ATLANTA SFERA Easy TECHNICAL DETAILS: - Two maintenance-free AGM batteries, 12 V – 100 Ah each, connected in series - 160 pallets per charge – charging time: 8–10 hours - High-frequency battery charger with LED indicator - Wrapping height “machine with mast (pallet included): 2,150 mm - Height detection via photoelectric sensor or manual entry on the display - Safety bar for emergency stop of the drive unit - Emergency stop switch in accordance with CE regulations - Acoustic warning signal and warning light at machine startup - Fall protection for the film carriage - Push buttons for Start & Stop - Machine operation compliant with CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: - All functional parameters adjustable via display - F00 – Display lock for program modification - F02 – Adjustable machine speed around the pallet up to 80 m/min - Carriage speed upward and downward can be set independently - F03 – Carriage speed upwards from 1.3 to 5.4 m/min - F04 – Carriage speed downwards from 1.3 to 5.4 m/min - F05 – Number of wraps at pallet base (1–10 wraps) - F06 – Number of wraps at pallet top (1–10 wraps) - F09 – Pallet wrap height setting - F13–F16 – Film tension at base & top wrapping / ascent & descent independently adjustable - F17–F20 – Film pre-stretch at base & top wrapping / ascent & descent independently adjustable - F62 – Ergonomic height for film roll change - Film consumption indicator (option for PRS–PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: - 6 storable wrapping programs for SFERA EASY - F01-1 – Cross wrapping (upwards/downwards) - F01-2 – Simple wrapping (upwards only or downwards only) - F10–F11 – Wrapping cycle with predefined start and stop heights - F12 – Wrapping to a preset height (disabling the photoelectric sensor for height) - F21 – Wrapping cycle for large-size pallets - F22/F23 – Wrapping cycle for top sheet application - F29 – Soft-start cycle for application of edge protection - F30–F31 – Wrapping cycles with reinforcement and adjustable number of wraps - Soft-start to reduce film tearing on sharp pallet corners - Wrapping cycle with manual or motorized roping (optional) FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE: - Brake tension manually adjustable from carriage by tension roller - Film specification: max. outer diameter Ø 250 mm – core Ø 76 mm – height = 500 mm - Optional: stretch film with core Ø 50 mm or coreless - Standard connection: 230 V – 1L+N+PE – 50 Hz Options available: - Wrapping height up to 3500 mm - FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” 200% - FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM CARRIAGE TYPE “PS” (POWER STRETCH) 120–400% - Automatic roping system for reinforced wrapping - Automatic system for cutting film into 3 strips for “BANDEROLL WRAPS” Bwedpfx Agsykty De Iet - Machine version for temperatures down to –5°C - LITHIUM RELION BATTERIES 2 x 12V Additional systems available from stock in Ludwigsburg. Image for reference only.

Gamybos metai: 2023, būklė: naujas, Funkcionalumas: visiškai funkcionalus, Description: RAPID DGL 200 M Double Mitre Saw Working length: 5,100 mm Working height: 160 mm Swivable: yes Aluminum spray unit included Short length stop included Socket for external extraction available Vertical clamping device included Traveling roller conveyor (right-side infeed) Rapid DGL 200 M Double Mitre Saw ----- with 500 mm saw blade diameter, manual length adjustment with digital length display, pneumatic angle setting for 45° and 90° angles. Simple Operation and Superior Quality ----- For precise and burr-free cutting of aluminum, plastic, and wood profiles. System Features: ----- - Manual length and angle adjustment - 500 mm saw blade - Extremely stable machine bed - Full enclosure of the guide bushings around the guide shafts of the saw head - Hardened guide shafts - Swivel axis supported on both sides Digital Length Display: ----- Perfect dimensional and angular accuracy guaranteed. ----- We utilize precise and efficient motion technology: Ball linear bearings for length adjustment, spring suspension of the swiveling units for convenient and safe angle adjustment between 45° and 90°. Length and angle adjustments on this double mitre saw are performed manually. Greater operating comfort and productivity can be achieved with the help of the digital length display and pneumatic swivel device. With 500 mm blades, a wide range of profile systems can be processed. Technical Data ----- Drive: 2 x 2.2 kW three-phase motors, 400 Volt Swivel range: manual, 45° to 90° Saw blade: 500 mm diameter Cutting lengths: 5,100 mm Profile clamping: 2 horizontal clamping cylinders Length adjustment: manual Bwjdetdgitspfx Ag Ijt Air pressure: 7 bar Dimensions: 5,250 x 1,420 x 1,900 mm Weight: 1,260 kg

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Platforminė keltuvinė platforma su pakylu, skirta šakių krautuvams (kaip nauja) Plotis: 870 mm Gylis: 870 mm Turėklų aukštis: 1020 mm / 1500 mm / bendras apsauginio stulpo aukštis: 2330 mm Įskaitant pakylimą: 480 mm, su šoniniu įėjimu Bjdpfszyu Tisx Ag Iewt Su atstumu tarp šakių krautuvo tvirtinimo taškų: min.: 550 mm – maks.: 940 mm Šakių krautuvo tvirtinimo įrenginio plotis: maks. 190 mm x aukštis: 90 mm Galima iš karto iš sandėlio Kaina: 1900,00 € + 19 % PVM