4 Velenų Tekinimo Staklės pirkti naudotą (90 513)

Gamybos metai: 2002, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, 3 main spindles with 70 mm bar capacity FUNCTIONS The raw bar is machined in spindles 1 and 2 using a 12-position turret. At the same time, a 2-position frontal turret can operate on this spindle (for drilling or internal turning operations). After machining, the drum indexes. The pre-turned part is finish-machined and parted off/picked off in spindle 3 using a 12-position turret. Subsequently, the part is finish-machined in the counter-spindle and unloaded by the discharge gripper (monitoring included). The bar is fed forward and the drum indexes. TECHNICAL DETAILS Iiodpfxen Uum Hs Alrsc Bar capacity: 70 mm Counter-spindle Tool turrets: 5 units, VDI30 (CNC cross-slide) High-pressure internal cooling: two turrets Measuring system: direct, high-resolution for all X-axes Control unit: Siemens 840 D Powerline Tool monitoring: Artis Collet chucks: 4x Hainbuch SK65 Number of parallel tools: 5 Main spindle 1: rough turning Toolholder: 12-position turret Additional: 2-position frontal turret can be used Main spindle 2: finish turning Toolholder: 12-position turret Additional: 2-position frontal turret can be used Main spindle 3: finishing, parting off, and backworking Toolholder: 12-position turret EQUIPMENT Bar feeder for 1,500 mm bar lengths

Būklė: naudotas, Gamybos metai: 1998, Valdymas Siemens 840 D Apgręžimo skersmuo virš skersinio stumdomojo vežimo: 650 mm Maksimali apsukų dažnis: 3800 min/-1 Ašies skersmuo priekinėje atramoje: 150 mm Ašies skylė: 92 mm Ašies galvutė: A8 DIN55026 Įrankių vietų skaičius: 2x 12 pozicijų Įrankio laikiklis: VDI 40 Mašinos svoris apie 7,0 t Mūsų vertinimu, mašinos yra geros naudotos būklės ir gali būti apžiūrėtos su įjungta elektra susitarus dėl laiko. Techninės charakteristikos: - Nominalus ilgis: 1500 mm Priedai: - Drožlių transporteris - Felsomat pakrovimo sistema - Apgręžimo griebtuvas - Frezavimo korpusas Yra 2 vienodos mašinos. Iijdsx I Simopfx Alrsc Priedai, paveikslėliuose rodomi įrankiai ir tvirtinimo priemonės į komplektą įeina tik tuomet, jei tai nurodyta papildomoje informacijoje. Techniniai duomenys ir informacija gali būti keičiama bei tarpiniu pardavimu pasiliekama teisė!

Būklė: naudotas, Gamybos metai: 2013, Pavaros x/z: 20/40 m/min Greitasis eiga (x/z): 18 000 / 30 000 mm/min Įrankių vietų skaičius: 12 pozicijų Įrankio tvirtinimas: VDI 50 Mūsų vertinimu, įrenginys yra geros naudotos būklės ir gali būti apžiūrėtas prijungus prie elektros pagal susitarimą. Yra 2 įrenginiai. Priedai, nuotraukose matomi įrankiai ir tvirtinimo priemonės į pristatymo komplektą įtraukiami tik tuo atveju, jei tai nurodyta papildomoje informacijoje. Ijdpfx Aex Ik Tdslrjic Techniniai duomenys ir informacija gali būti keičiami ar būti netikslūs, taip pat galimas tarpinis pardavimas!

Būklė: naudotas, Gamybos metai: 2011, Techninės detalės: Sūkių diametras virš lovos: 1090 mm Sūkių diametras virš atramos: 690 mm Sūkių ilgis: 1100 mm Atstumas tarp centrų: 6000 mm Sūkių diametras išskietime: 1250 mm Centrų aukštis: 500 mm Verpstės pratekėjimas: 152 mm Sūkių diapazonas: 6,3 - 1250 aps./min Skersinis suportas: 525 mm Slankiklio kūgis MK: MK 6 Slankiklio eiga: 260 mm Plano pastūmos: 0,016 - 19,45 mm/aps Ilginės pastūmos: 0,032 - 38,9 mm/aps Pastūmų kiekis: 160 Veleno skylė: 155 mm Bendras galios poreikis: 30 kW Mašinos svoris apie: 10,65 t Mašinos matmenys apie IxPxA: 8,3 x 2,0 x 1,90 m Mašina komplektuojama su: ·Skaitmeniniu indikatoriumi (DRO) ·Keturgubas įrankių laikiklis ·Uodeginis centras ·Greitas perstūmimas ·Vedimo ir traukos varžtas ·Sunkios konstrukcijos mašinos lova Isdpfx Ajzdkz Delrjic ·Klasikinė konstrukcija

Būklė: naudotas, Atstumas tarp centrų 2 000 mm Sūkių skersmuo virš staklių lovos 350 mm Sūkių skersmuo virš planšlito 470 mm Staklių lovos plotis 525 mm Sūkiai 25 - 1 250 aps./min Variklio galia 18 kW Veleno skylė 92 mm Veleno galva ISO 702-3 Gr. 15 Konuso skersmuo 145 mm Vidinis konusas MK 6 Išilginė pastūma 0,035 - mm/-1 Pločio pastūma 0,009 - 8,0 mm/-1 Sriegimo (metriniai sriegliai) 0,5 - 304 mm Mūsų vertinimu, įrenginys yra geros naudotos būklės ir gali būti apžiūrėtas prijungus prie elektros pagal susitarimą. Iisdszczhmspfx Alrec Vedinimo bėgiai yra labai geros būklės. Techninės charakteristikos ir priedai: - įvairūs priedai Priedai, pavaizduoti įrankiai ir tvirtinimo priemonės į komplektaciją įtraukti tik tuo atveju, jei tai nurodyta papildomoje informacijoje. Techniniai duomenys gali būti keičiami arba jose gali būti klaidų. Tarpinis pardavimas galimas!

Būklė: geras (naudotas), Gamybos metai: 2003, Ref. Nr.: 10454 Gamintojas: DOOSAN Tipas: DAEWOO PUMA 300 MSC Metai: 2003 Valdymo tipas: CNC valdymas Valdymas: FANUC 18i-TB Sandėlio vieta: Halberstadtas Kilmės šalis: Pietų Korėja Mašinos Nr.: 0MS19XX Sukimosi greitis: 4 500 aps./min. Strypo pralaida: 62 mm Sukimo ilgis: 595 mm Revolverio pozicijos: 12 vnt. Papildoma informacija: - 4 ašys (X/Z/C/B) - Priešpriešinis velenas Isdpszc Dy Eefx Alrjic - Varoma įrankių stotis - Gatavo gaminio išėmimo sistema - Konvejeris - Drožlių transporteris - Aušinimo sistema Powercool - Strypų padavėjas LNS Quickload Servo 3 - Įrankių laikiklis - Spaustuvo laikiklis - Spaustukai Mašiną galima apžiūrėti prijungtą prie elektros pagal susitarimą.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, tekėjimo ilgis: 2 000 mm, veleno skylė: 105 mm, ašies variklio galia: 21 000 W, bendras aukštis: 2 100 mm, bendras ilgis: 4 500 mm, bendras plotis: 2 000 mm, X ašies padavimo greitis: 8 000 m/min, Y ašies padavimo greitis: 8 000 m/min, tekinimo skersmuo virš slankiojančio stalo: 620 mm, ruošinio svoris (maks.): 2 500 kg, bendras svoris: 7 800 kg, Labai mažai darbo valandų Hidraulinis lunetas CE saugos durys Multi-Fix D1 įrankių laikiklio sistema Drožlių transporteris Sūkių skersmuo virš lovos Ø: 620 mm Sūkių skersmuo virš stumoklio: 370 mm Sūkių ilgis: 2000 mm Veleno skylė: 105 mm Iijdeyuchropfx Alroc Veleno galia: 21 kW Pinolis: 100Ø Pinolio eiga: 200 mm Veleno kūgis: 6Mk Detalės svoris: 2500 kg Sūkių dažnis: 1600 rpm X ašies pastūma: 8000 mm/min Z ašies pastūma: 8000 mm/min Ilgis: 4500 mm Plotis: 2000 mm Aukštis: 2100 mm Svoris: 7800 kg Atkreipkite dėmesį: Šios svetainės informacija parengta pagal mūsų geriausias žinias ir, kiek įmanoma, gauta iš gamintojo. Informacija pateikiama sąžiningai, tačiau jos tikslumas negarantuojamas. Atitinkamai, tai nėra garantija ir neformuoja sutartinių sąlygų. Rekomenduojame patikrinti visą svarbią informaciją.

Būklė: geras (naudotas), Swing diameter over bed: 380 mm Swing diameter over cross slide: 250 mm Turning length: 600 mm Spindle speed: 90 – 1600 rpm Centre height: 200 mm Total power requirement: 4.2 kW Machine weight approx.: 1.3 t Iiedpszd Hf Sjfx Alrjc Space requirements approx.: 2.2 x 0.9 x 1.6 m

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, galia: 4,5 kW (6,12 AG), stalo plotis: 1 300 mm, stalo ilgis: 2 500 mm, bendras svoris: 790 kg, ašių skaičius: 3, Įranga: CE žymėjimas, dokumentacija / vadovas, This is a CNC milling machine featuring 4 spindles that can operate simultaneously and switch automatically! This significantly increases production efficiency, making it four times faster. Ijdsr D Ntfepfx Alrsic This CNC router is ideal for large-scale production of façades, doors, windows, decorative moldings, and more. The Wattsan M1 1325 planetary gearbox enables effortless milling of hardwoods and non-ferrous metals. Additionally, a vacuum table can be installed to ensure rock-solid workpiece fixation. With a Wattsan milling machine, you can process metals, hardwoods, plastics, foam, aluminum, and acrylic glass. Contact our sales team for further details! Features of the Wattsan M1 1325 S4: Working area: 1300 x 2500 mm Spindle: 6 kW Machine dimensions: 2000 x 3040 x 1780 mm Weight: 1,000 kg Virmer not only offers premium-grade machinery, but also provides comprehensive service and delivery. Our engineers and sales specialists are ready to answer all your questions and can provide video support if needed. Additionally, Wattsan machine owners receive lifetime online support. Virmer is headquartered in the Netherlands and operates throughout Europe. Virmer is the official distributor for Wattsan. We supply not only laser engravers, but also metal cutters, welding machines, marking systems, and cleaning machines. Wattsan is a Chinese manufacturer with nearly 15 years of experience producing laser equipment, constantly evolving through customer feedback. Thanks to this input, Wattsan has implemented more than 50 upgrades, making their machines increasingly reliable, precise, and powerful—helping you take your business to the next level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK If you are looking for the right laser or CNC milling machine, we are here to help. You will find a wide selection of laser systems and equipment with us: CO2 laser machines; metal laser cutting machines; metal laser cutters; fiber laser systems for metal; fiber laser engraving machines; CNC milling machines for metal; woodworking routers; CNC routers; laser engraving machines; laser engravers; laser cutters for plywood; laser engravers; metal laser cutting machines; CNC routers; laser marking systems; lenses; chillers; machine cooling systems; S&A chillers; IPG Lasers, MAX Photonics, Raycus; compressors; rotary devices; mirrors for laser machines.

Būklė: naudotas, Gamybos metai: 1999, Technical details: Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Turning length: 700 mm Distance between centers: 700 mm Spindle speeds: 55 - 2350 rpm, 8-step mechanical Spindle bore: 50 mm Tailstock quill travel: 120 mm Tailstock quill taper: MT3 Spindle torque: 350 Nm Max. workpiece weight – overhung: 50 kg Total power requirement: 3.0 kVA Machine weight approx.: 0.79 t Iisdju Ixw Aepfx Alrjc Machine dimensions approx. LxWxH: 1.6 x 0.9 x 1.4 m 3-jaw chuck Forkardt Ø 200 mm (external clamping) Longitudinal slide travel X-axis: 600 mm; longitudinal feed 0.045 – 0.787 mm/rev in 20 steps; metric threads Cross slide travel Y-axis: 220 mm; cross feed 0.023 – 0.406 mm/rev in 20 steps Compound slide swivels right 60° and left 120° Thread cutting Machine lighting No coolant supply (pre-installed for retrofitting) Accessories: 3 sets of turning jaws 3x Multifix tool holders 2x drill chucks 1x live center 3 machine leveling feet

Būklė: naudotas, Gamybos metai: 1987, Technical details: Swing diameter over bed: 500 mm Swing diameter over support: 280 mm Turning length: 1,500 mm Distance between centers: 1,500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Speed range: 25-1,250 / 32-1,600 / 36-1,800 - 18 steps rpm Feed range: 0.05 - 8.5 mm Rapid traverse x-axis: 4 m/min Iedpsu Ixznjfx Alrsic Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 200 mm Total power requirement: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions approx. LxWxH: 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 - 2.8 mm (end position switch clutch not functional, manual shut-off required) Top slide with 4-position tool post Steel plate Ø 705 mm with offset threaded holes

Būklė: naudotas, Techniniai duomenys: Sukimosi skersmuo virš lovos: 560 mm Sukimosi skersmuo virš stumdomos dalies: 280 mm Sukimo ilgis: 2000 mm Centru aukštis: 280 mm Centru atstumas: 1600 mm Darbinio veleno skylė: 65 mm Sūkių diapazonas: 9...1800 / 24 žingsniai aps./min Išilginiai padavimai: 0,025-0,09 mm/apl Skersinis padavimas: 0,012-0,045 mm/apl Grąžto movos eiga: 225 mm Iodpfx Aowa I Shslroic Grąžto movos kūgis: MK5 Bendras energijos poreikis: 18 kW Apytikslis įrenginio svoris: 3,8 t Apytiksliai matmenys (IxPxA): 3,7 x 1,6 x 2,05 m Trijų žandikaulių griebtuvas D=320mm Viršutinė slankiojanti dalis pasukama 45° į dešinę ir į kairę

Būklė: naudotas, Gamybos metai: 1976, Technical Details: Swing diameter over bed: 340 mm Swing diameter over slide: 190 mm Turning length: 800 mm Turning length: facing = 140 mm / cross = 120 mm Centre height over bed: 170 mm Spindle bore: Ø 40 mm Speed range: 25 - 2000 rpm / 20 steps Feeds: longitudinal: 0.028 - 1.0 mm / cross: 0.012 - 0.44 mm Tailstock quill taper: MT3 Tailstock quill travel: 120 mm Total power requirement: 3.0 kW Machine weight approx.: 1.1 t Machine dimensions approx. LxWxH: 2.0 x 0.8 x 1.4 m Iedpfx Aova Ertolreic Thread cutting capability: Metric, Whitworth, and module threads Equipment: - 2-way measuring system VISUCONT - 3-jaw chuck Ø 205 mm with internal clamping jaws - Multifix quick-change toolpost - Foot brake - Coolant pump (supply line not included)

Būklė: naudotas, Gamybos metai: 1952, Technical details: Swing diameter over bed: 1000 mm Swing diameter over cross slide: 520 mm Turning length: 2500 mm Cross slide travel in z-axis (plan): approx. 500 mm Top slide travel in z-axis: approx. 300 mm Centre height: 300 mm Spindle bore: 90 mm Speed range: 3.2 – 382 / 22 steps rpm Feed range x-direction (longitudinal): 0.213 – 2.67 / 36 steps m/min Iijdpfx Aju Tq U Iolrec Feed range y-direction (transverse): 0.070 – 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Approx. machine weight: 8.2 t Approx. machine dimensions (LxWxH): 5.3 x 1.6 x 1.6 m Transport dimensions: approx. 5.5 x 1.7 x 1.6 m Equipment: Face plate Ø 1000 mm 4-way tool post Steady rest Ø 250 mm, closed Accessories: Four-jaw chuck Ø 630 mm

Būklė: naudotas, Gamybos metai: 1975, Technical Details: Swing over bed: 500 mm Swing over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Distance between centres: 1000 mm Spindle speeds: 11.2 - 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 - 1.6 mm/rev – 32 steps Cross feeds: 0.02 - 0.71 mm/rev – 32 steps Total power requirement: 11 kW Machine weight approx.: n/a t Machine dimensions approx. LxWxH: 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle run), available free in Leipzig. Top slide rotatable 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for 2000 rpm. Thread cutting: metric, module, inch threads Chip protection wall Isdpfxov A Sqhe Alrsic Chuck guard (mechanical) MULTIFIX toolpost with boring bar holder Ø 40 mm Chip collection tray Coolant supply with pump Lead screw protection Machine feet CE safety pre-installed

Būklė: naudotas, Technical Details: Swing diameter over bed: 320 mm Turning length: 800 mm Distance between centers: 800 mm Center height: 150 mm Iedpfsu Ixy Dex Alreic Spindle bore: 30 mm Speed range: 35 - 1500 / 16 steps rpm Feed range x-axis: 0.04 - 2.4 / 30 steps m/min Tailstock quill travel: 125 mm Tailstock taper: MT2 Machine dimensions approx. LxWxH: 1.7 x 0.8 x 1.5 m Equipment and additional features: - Röhm 3-jaw chuck, 160 mm - Chuck guard - Protection system WxH: 510x400 mm - Multifix tool holder (4 pieces) - Center in tailstock - Top slide pivotable +/-45°, max. travel = 100 mm - Cross slide travel = 300 mm feed - Coolant system pump (without supply piping)

Būklė: naudotas, Gamybos metai: 1960, Technical Details: Swing diameter over bed: 630 mm Swing diameter over cross slide: 320 mm Turning length: 2800 mm Distance between centers: 2800 mm Swing diameter in gap: 700 mm Iedpfxsu Ix A Ee Alreic Gap length: 450 mm Spindle bore: 70 mm Machine weight approx.: 4.4 t Machine dimensions approx. (LxWxH): 4.7 x 1.5 x 1.5 m Thread cutting capability Accessories: 4-jaw chuck different centers gears jaws and small parts steady rest

Būklė: naudotas, Gamybos metai: 2016, Technical Details: Swing diameter over bed: 402 mm Swing diameter over cross slide: 245 mm Turning length: 1000 mm Centre distance: 1000 mm Centre height: 200 mm Ijdjvav Sdjpfx Alreic Swing diameter in gap: 560 mm Gap width: 120 mm Spindle speed: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev + cross: 0.025 - 0.376 mm/rev Spindle bore: Ø 42 mm Tailstock quill taper: ISO MK4 Tailstock quill travel: 180 mm Total power requirement: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions (LxWxH) approx.: 2.4 x 1.0 x 1.7 m The lathe does not have a rapid traverse. Positioning over 2 axes Readout via Pinacho Lathe Controller Multifix toolpost with turning tool Coolant system Foot pedal Thread cutting possible (metric, Whitworth, module, pitch)

Būklė: naudotas, Gamybos metai: 1970, Technical details: Swing diameter over bed: 325 mm Swing diameter over cross slide: 150 mm Turning length: 1000 mm Turning length: facing: 165 mm / transverse: 160 mm Centre height over bed: 200 mm Gap length: no gap mm Spindle speed range: 48 - 1,500 / 10-step rpm Work spindle bore: 40 mm Iodpou Ixydefx Alroic Feeds: longitudinal: 0.021...2.34 mm / transverse: 0.09...1.6 mm Tailstock quill taper: MK 4 Tailstock quill stroke: 125 mm Total power requirement: 2.2 kW Approx. machine weight: 1.0 t Machine dimensions approx. LxWxH: 2.1 x 0.7 x 1.2 m Thread cutting possible: Metric, Whitworth and module threads Equipment: - 3-jaw chuck Ø 200mm with internal clamping jaws - Multifix quick-change toolholder - Foot brake - Coolant pump (delivery exclusive)

Būklė: naudotas, Gamybos metai: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Swing diameter in gap: 600 mm Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Feed range x-axis: 0.0120 - 0.1000 mm/rev Ijdju Ix D Aopfx Alroic Feed range y-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (not guaranteed) Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Equipment: 3-jaw chuck Röhm Ø 200 mm 4-way tool post, swivels 30° right/left 2x T-slots for copying device Live center

Būklė: naudotas, Gamybos metai: 1951, Technical details: Iedpfx Aju Ix Hdelrjic Swing diameter over bed: 400 mm Swing diameter over carriage: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: MT 4 Tailstock quill travel: 180 mm Approx. machine weight: 1.6 t Approx. machine dimensions LxWxH: 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. It has been newly rewired and fitted with a new control cabinet. Emergency-stop switch and chuck guard installed 3-jaw chuck Ø 250 mm Live centre Four-way tool post Tool slide swivels approx. 30° to the right/left Taper turning attachment (cone 15° right/left) 4 change gears

Būklė: naudotas, Gamybos metai: 1986, Technical details: Swing diameter over bed: 315 mm Swing diameter over cross slide: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum swing diameter over faceplate slide: 200 mm Centre height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 RPM / only 6 selectable speeds, left-right Feed range x-axis (longitudinal): 0.02–0.8 m/min Feed range y-axis (transversal): 0.01–0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Approx. machine dimensions LxWxH: 2.1 x 1.1 x 1.4 m Iijdpfx Alju Ix Hqersc - Workpiece clamping via collet chuck - Travel paths: Longitudinal slide = 580 mm, Cross slide = 170 mm - incl. tool rest (steady for turning) - incl. change gears - Steady rest Ø 100 mm - Four-way tool post The machine operates with limited functionality! 6 speeds are currently selectable! (224/1800; 280/2240; 355/2800 RPM) Sale as described.

Būklė: naudotas, Gamybos metai: 1974, Technical details: Swing diameter over bed: 500 mm Swing diameter over support: 300 mm Turning length: 2100 mm Centre distance: 2000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1800 / 18 steps rpm Rapid traverse x-axis (cross slide): 4.2 m/min Tailstock quill taper: MT 5 Tailstock quill stroke: 180 mm Control voltage: 220 V Machine weight approx.: 3.25 t Machine dimensions approx. LxWxH: 3.5 x 1.2 x 1.6 m Thread cutting possible, e.g. metric thread, module thread and imperial thread Iodpfou Ix Dcox Alroic Rapid traverse cross slide Chuck guard 2x chip trays Accessories: (see similar in photo) 2x steady rests (1x closed, 1x open) Faceplate 3-jaw chuck Jaw sets Flange Centres Various gears

Būklė: naudotas, Gamybos metai: 1975, Technical details: Swing diameter over bed: 400 mm Swing diameter over support: 220 mm Turning length: 1,100 mm Centre height: 180 mm Spindle bore: Ø 45 mm Speed range: 31.5 - 1,400 rpm / 12 steps Feed range x-axis (longitudinal): 0.08 - 1.10 m/min Feed range y-axis (cross): 0.028 - 0.40 m/min Ijdpou Ix E Hefx Alreic Tailstock quill taper: MK4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Machine dimensions approx. LxWxH: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm by Forkardt with reversible jaws - Multifix tool holder - Coolant system with pump - Chuck guard - Chip tray - Chip guard Accessories: - Chuck key - Tool holder - 2 gears

Būklė: naudotas, Gamybos metai: 1970, Technical details: Swing diameter over bed: 500 mm Swing diameter over support: 300 mm Turning length: 1000 mm Centre height measured on bed: 250 mm Centre distance: 1000 mm Speeds: 18...1800 / 21-step rpm Spindle bore: 56 mm Iisdpfx Asvvrpkelrec Tailstock quill travel: 180 mm Longitudinal feeds: 0.08 - 3.26 mm/rev Cross feeds: 0.04 - 1.63 mm/rev Rapid traverse X-axis: 4.2 m/min Total power requirement: 7.5 kW Machine weight approx.: 2.9 t Machine dimensions approx. LxWxH: 2.6 x 1.1 x 1.3 m 4-jaw chuck Ø 250 mm with internal jaws Live centre in tailstock 4-way quick-change toolholder Coolant system Accessories: Various reduction sleeves MK3-MK5-MK4 Live centre Drive dog 3-jaw chuck Ø 250 mm with internal jaws The machine does not comply with UVV (accident prevention regulations)!