Vibro Bandymo Įrenginys (Shaker) pirkti naudotą (25 357)

Būklė: labai geros būklės (naudotas), Feutron Model: 3702/06 Water-cooled Climate Test Chamber Technical Data: Nominal test chamber volume: 2.0 m³ Dimensions: Test chamber exterior, including humidification console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum installation opening: Width 2970 mm, Height 2390 mm, Depth 1550 mm Test chamber internal dimensions: Width 2000 mm, Height 1000 mm, Depth 1000 mm Door: Double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing windows (heated), 2 pieces, width: 500 mm, height: 600 mm Cable port, 1 piece, left side wall, diameter 75 mm Temperature range: -40...100°C Climate range: 10...95°C Iijdpfszd Sdmox Alrjc Temperature variation over time: ≤ ±0.5...±1.0 ΔN/K Change rates measured in supply air without load: Cooling: up to 2.0 average K/min Heating: up to 2.0 average K/min Humidity range: 10...95 % relative humidity Humidity variation over time: ≤ ±3.0 % r.H. Dew point range, temporarily: -5...95°C Cooling unit: water-cooled semi-hermetic Bitzer system Refrigerant: R507 (M-K1) Climate and dryer refrigeration unit: air-cooled / hermetic system Refrigerant: R134a (M.KK) Power Supply: Electrical connection: 400V 3/N/PE AC, 50Hz Plug: CEE 5-pin, 32A, with 5.0 m cable Max. simultaneous power requirement: 10.0 kW Circuit breaker: 3 x 25 A, type C Protection class: IP20 Weight: 1300 kg Condition: used Scope of delivery: (see picture) (Modifications and errors in the technical data and specifications excepted!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature - Temperature range: -40...90°C - Climate range (without heat load): 10...85°C - Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min - Temporal temperature deviation during climate operation: ± 1.0... ± 1.5 K/min Change rates - Heating: 2.0 K/min on average - Cooling: 2.0 K/min on average IEC 1646 standard testing is possible, including modules with a maximum weight of 160kg and non-linear ramps (setpoint jump). Drying - Air drying: condensation drying Humidity - Air humidification: steam humidification - Humidity range: 10...95% relative humidity Iiedpfx Aozd Sdgslrjc - Temporal humidity deviation: ≤ ± 3.0... ± 5.0 % r.h. - Dew point range: 8...80.9°C Test chamber - Interior volume: 7.0 m³ - Interior dimensions: 1500 mm (W) x 2250 mm (H) x 2000 mm (D) - Hinged door DIN right, heated, with glass insert: 900 mm (W) x 2100 mm (H) - Viewing window, heated, with blackout panel and lockable: 500 mm (W) x 600 mm (H) - 2 feedthroughs in right front panel, Ø 75 mm Irradiation unit test chamber - 4 cutouts in left side wall for SC 2500, each 850 x 700 mm - Irradiated area when using SC 2500: 1200 x 1200 mm - Radiation intensity at 1.0m wall distance: 1000 ± 10% W/m² - Lighting: 1x 200W halogen lamp Refrigeration unit - Bitzer semi-hermetic 2-stage compressor, air-cooled - Condenser: Split design (outdoor installation, winter control) - Refrigerants: R507 / R23 Temperature control system - Cooling brine medium: Tyfocor / water - Mixing ratio: 50/50% - Cooling brine density: 1.072 kg/dm³ - Fill quantity: approx. 80 dm³ Pyranometer - Temperature range: -40...150°C - Max. radiation absorption: 4000 W/m² - Spectral range (50% points): 305...2800 nm - Sensitivity (nominal): 7 µV/W/m² Test chamber power supply - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: fixed connection - Max. simultaneous power requirement: approx. 32.0 kW - Supply line fuse: 3 x 63A, Type C SolarConstant power supply - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: fixed connection - Max. simultaneous power requirement: approx. 30.0 kW - Supply line fuse: 3 x 63A, Type C External dimensions of the test chamber complete with: Equipment room / control cabinet and control cabinet for SolarConstant 2500 - Equipment room external dimensions: 3440 mm (W) x 2580 mm (H) x 2950 mm (D) - Control cabinet: 2200 mm (W) x 1830 mm (H) x 1100 mm (D) - Split condenser external dimensions: 900 mm (W) x 950 mm (H) x 2000 mm (D) Total weight test chamber: approx. 2700 kg Condenser weight (empty): 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors reserved!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), Here we offer a shock test chamber. Water-cooled temperature shock test chamber Two-chamber design Iodjzd R Uwjpfx Alroic Hot Chamber: Temperature range of the hot chamber: +50°C to +220°C Temporal temperature deviation at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold Chamber: Temperature range of the cold chamber: -65°C to +70°C Temporal temperature deviation at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test area dimensions: Width 470mm x Depth 650mm x Height 410mm External dimensions: Width 930mm x Depth 2115mm x Height 1970+mm Nominal power: 10 kW Rated current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerants: R404A / R23 Operating hours: 27,903 h Weight: 1,000 kg For your safety as a buyer, please note the following information! The following work is carried out on all test chambers we offer prior to sale: 1. Functional test and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, which is monitored using calibrated equipment. Type: HT 7012 S2 Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and errors excepted!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), Here we offer a climate test chamber. Air-cooled Test chamber nominal volume: 280 liters Dimensions External dimensions: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Clear passage (door): 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range: +5 to +100 °C Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Climatic range: +10 to +95 °C Humidity range: 10 to 95% RH Humidity deviation, over time: ≤ ± 3.0 Water connection for humidifier: Mains water or distilled water, 20l storage tank Power supply: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 500 kg Type: 3416/16 Refrigerant: R134a For your security as the buyer, please note the following! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant Iedpfjzd R T Tex Alrsic 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) Further questions can be answered by phone.

Būklė: labai geros būklės (naudotas), Heraeus Vötsch Temperature Test Chamber We offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB(A) Side port: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R 452A and R 23 Weight: approx. 570 kg Type: VTS 7034-5 For your safety as a buyer, please note the following information! The following work is performed on our offered chambers in advance: Iedpfx Alezd R Tgsrjic 1. Functional check and replacement of necessary components 2. Newly filled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated instruments. Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical details and information!) For any further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Weiss Temperature Test Chamber We are offering you a Weiss temperature test chamber. Weiss Temperature Test Chamber, water-cooled Technical specifications: Isdpfszd R Svsx Alrjic Model: WT1-600/70 External dimensions (excluding hinges and door lock): Height: 1980 mm, Width: 1085 mm, Depth: 1655 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Test chamber volume: approx. 600 liters Cold / heat operation: -70 to +180°C Temperature change rate: Cooling approx. 2.5 K/min Heating approx. 4 K/min Power supply: 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Maximum permissible test load: Total rack load: 80 kg Refrigerants: R404A + R23 Weight: 600 kg Type: WT1-600/70 Important information for your safety as the buyer: The following steps are carried out on our test chambers before delivery: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerants 3. After successful inspection, the chambers undergo a test run, monitored with calibrated equipment. Condition: used Scope of delivery: (see image) (Specifications subject to change and errors excepted!) If you have any further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Weiss Temperature Test Chamber We are offering a temperature test chamber for sale. Weiss Temperature Test Chamber, Water-Cooled Technical data: Model designation: WT-600/70 External dimensions (with hinges and door lock): Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions (without hinges and door lock): Iedpfxszd R Dre Alrsic Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Test chamber capacity: approx. 600 liters Cooling / Heating operation: -70°C to +180°C Temperature change rate: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Site circuit protection: 32 A slow-blow Permitted test specimen weight: Total load on shelf supports: 80 kg Test chamber floor: 80 kg, Shelf rack: 40 kg Refrigerant: R 404A / R23 Weight: 675 kg Type: WT-600/70 Important safety information for you as a buyer: The following procedures are carried out in advance on our advertised chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After a successful check, the chambers are subjected to a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see image) (We reserve the right to make changes and correct errors in the technical data and information provided!) If you have any further questions, we will be happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Heraeus Shock Test Chamber We offer a shock test chamber here. Temperature Shock Test Cabinet, Water-Cooled Two-chamber design Hot Chamber: The temperature range for the hot chamber is from +50°C to +220°C Temporal temperature deviation at the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Rate of temperature change Heating: 11 K/min Cold Chamber: The temperature range for the cold chamber is from -65°C to +70°C Temporal temperature deviation at the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Rate of temperature change Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: Width 470mm, Depth 650mm, Height 410mm External dimensions: Width 930mm, Depth 2115mm, Height 1970+mm Iiodpozd R Azefx Alrec Rated power: 10 kW Rated current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Weight: 1000 kg For your security as a buyer, please note the following! The following measures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a trial run, monitored with calibrated instruments. Model: HT 7012 S2 Condition: used Scope of delivery: (see photograph) (Specifications and data subject to change and error!) If you have any further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), RS Simulators Here we offer a climate test chamber. Iijdpfjzd R Ausx Alrsc Water-cooled 300 liters Temperature range from -75°C to +180°C Temporal deviation: ±0.2 K to ±0.8 K Average heating rate: approx. 2.1 K/min Average cooling rate: approx. 1.2 K/min Humidity range: 10% to 98% relative humidity Operating climate range: Temperature: 10°C to 95°C Humidity: 25% to 75% relative humidity Dimensions: Width 1000 mm, Height 1800 mm, Depth 1400 mm Voltage: 3x400V/N/PE, Current: 40A Refrigerant: R404a / R23 Type: KS 300 / 75 Weight: 630 kg For your safety as a buyer, please note the following information: The following steps are performed on all chambers offered by us: 1. Functional test and replacement of necessary components 2. New filling with compliant refrigerant according to legal requirements 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see pictures) (Specifications and technical data subject to change and error!) If you have further questions, please feel free to contact us by phone.

Gamybos metai: 2011, būklė: labai geros būklės (naudotas), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control System: 32-bit Controller LCD Control Panel Digital display of set and actual values Numerical input of setpoints Plain text fault messages Interface: RS 232 Free switching channels for user-specific test item control Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: - Heating: 2 K/min - Cooling: 1.5 K/min down to -10°C Radiant heat output: approx. 1000 W at +20°C, approx. 200 W at -25°C Nitrogen inertization with residual oxygen monitoring: The test chamber is first purged with a high volume of N2 until the oxygen content is below 3%. It then switches to a base level supply (approx. 10% of the full purge rate). Base level nitrogen flow is measured, displayed by a flowmeter, and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber through a flame arrester, directing it to an O2 sensor which checks the residual oxygen content. The gas is then returned to the chamber through a second flame arrester. The exhaust pump is monitored by a volume flow meter. Further details are available in the Dräger manual in the appendix. The gas system is currently deactivated! Technical data is based on an ambient temperature of +25°C, nominal voltage 400V, without test item, without radiant load, and without additional equipment. Dimensions: Test volume: 950 liters Test chamber dimensions: approx. 700 mm (H) / approx. 900 mm (W) / approx. 1500 mm (D) External dimensions: approx. 2400 mm (H) / approx. 1270 mm (W) / approx. 3125 mm (D) Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 21.6 kW Nominal current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, 1/2" internal thread Sound pressure level: < 62 dB(A) (measured per DIN EN ISO 3744 at 1m distance from the front) Weight: approx. 1500 kg, control cabinet approx. 300 kg External refrigeration unit Refrigerant: R404A / R23 Important Safety Information for Buyers: The following steps are carried out in advance on chambers we offer: 1. Functional testing and replacement of necessary components 2. Recharging with legally compliant refrigerant if necessary 3. Leak test with certification 4. After successful inspection, chambers undergo a documented test run. Ijdpfx Alezd Rzworeic Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data. All information provided without guarantee!) If you have further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Vötsch shock test chamber. Water-cooled temperature shock test cabinet Two-chamber design Hot Chamber: The temperature range of the hot chamber is from +50°C to +220°C Iijdpfx Ajzd Rzkjlroc Temperature deviation over time at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold Chamber: Temperature range of the cold chamber: -80°C to +70°C Temperature deviation over time at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2,115 mm, height 1,970+ mm Port diameter: ∅ 67 mm Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerants: R404A / R23 Weight: 1,000 kg For your security as a buyer, please note the following information! The following procedures are performed on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. New charge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Model: VT 7012 S2 Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and errors reserved!) Further questions can be answered by phone.

Būklė: labai geros būklės (naudotas), Autotherm We are offering you a 6-circuit temperature control unit. No active chiller included! According to the attached technical brief: Temperature range: -40°C … +85°C (extended range -40°C…+130°C) Increased heating capacity: 27 kW instead of 18 kW Includes 1x temperature control in the main circuit Iijdpezd Rtyefx Alrjc Includes 6x temperature measurement in each supply line Includes 6x temperature measurement in each return line Includes 6x flow and pressure monitoring in each supply line Includes 6x flow and pressure control 1 l/min … 12 l/min and 0.1 bar … 3 bar Including strip control Including frequency-controlled main circuit pump Including 6x 3-way valve Includes 6x additional adjustable bypass valves (2 … 12 bar), preset to 2.4 bar Includes filling and draining device for all circuits at once Including 50 l integrated tank Including pneumatic drain function Including S7 controller Energy saving and increased cooling capacity: An additional glycol circuit integrated into the temperature circuit provides cooling for the consumer in a temperature range from +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C chilled water network. At a supply temperature of +20°C, the cooling capacity is 50 kW. This improves cooling speed for this temperature range and reduces energy consumption due to shorter compressor running times. (The footprint of the basic system increases by approx. 0.3 m² as per the data sheet) Mounted in Rittal bayed control cabinet: 2x TS8 800x1000x2000 mm 1x additional, lockable control cabinet min. 600x600x2000 mm (for control system/electrics) Supplied via on-site or optional cooling medium supply Supply temperature, on-site cooling brine -43°C, cooling brine demand 7.5 m³/h continuously regulated A cooling medium must be connected for cooling performance! Weight: approx. 1200 kg Type: Autotherm temperature control unit AWF 130-27/VK/6K Sale ex location! Condition: used Scope of delivery: (see picture) (Specifications and information subject to change and error!) Further questions can be answered by phone.

Būklė: paruoštas naudoti (naudotas), Renovuota 2016 m. Iedsd Hkf Nopfx Alreic Našumas: 40 juostų/min Juostos plotis: 4–12 mm Didžiausias skersmuo: 200 mm Šerdies ilgis: 190 mm

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, darbinis slėgis: 180 juosta, tuščias svoris: 158 kg, įėjimo įtampa: 400 V, garantijos trukmė: 6 mėnesiai, temperatūra: 155 °C, The Kärcher HDS 9/18-4M high-pressure cleaner is a highly efficient machine, also suitable for the most demanding tasks on large-scale facilities. During the comprehensive inspection and refurbishment, our service team thoroughly checked the machine for all functions. All mechanical components showing signs of wear have been replaced with new ones, including: ceramic pistons, seals, bearings, and all O-rings. This ensures a long and trouble-free service life, without requiring any additional investment in the machine in the future. Product Advantages: The unit comes with brand new accessories, including a spray gun from the German brand R+M, stainless steel lance, steel-braided hose and a 25° power nozzle. A robust brass pump head with new ceramic pistons and seals guarantees long-lasting, reliable performance. The powerful and efficient 3-phase motor provides excellent performance. With operating parameters of 180 bar and 900 l/h, the machine is ideal for heavy-duty applications in construction, logistics and agriculture. Every device we offer includes custom-made photos, so you buy exactly the machine you see. Technical Data: Model: HDS 9/18-4M Supply Voltage: 400V ~ 3 phase Pump Output (l/h): 400 - 900 Working Pressure (bar): 30 - 180 Max. Water Heating Temperature (°C): 80-155 Power Rating (kW): 6.4 Fuel Tank Capacity (l): 25 Detergent Tank Capacity (l): 20 + 10 High-Pressure Hose Length (m): 10 Weight (kg): 158 Dimensions (L x W x H mm): 1330 x 750 x 1060 Equipment: NEW pressure gun by German brand R+M NEW 900mm stainless steel lance NEW reinforced 10m steel-braided hose NEW 25° power nozzle Water filter and GEKA coupling are included in the set free of charge. Ijdsza Efdopfx Alrjic

Būklė: naudotas, vakuuminiai kėlimo įrenginiai, Gamintojas: Fezer Tipas: RC 0010 B 5Z1 Vakuumas: 20 mbar Bendri matmenys: 720 x 600 x 570 mm Iedey E Twtjpfx Alreic Svoris: ~30 kg Komplektacijoje yra 4 vnt. flash padų Maks. keliamoji galia: 65 kg / vnt. / padas

Būklė: naudotas, Smėliavimo įranga, paviršiaus valymo įranga, smėliavimo kamera, naudota įranga Kompresorius: Gamintojas: Atlas Copco Tipas: XAS 90 Iiodpey H I U Nsfx Alroc Pagaminimo metai: 1992 Maksimalus slėgis: 8,5 bar Deutz variklis Bendri matmenys: Plotis: 1500 mm Ilgis: 3500 mm Aukštis: 1300 mm Talpos matmenys: Ø 630 × 1200 mm – 2 vnt. Dulkių kameros matmenys: Plotis: 930 mm Gylis: 630 mm Aukštis: 1390 mm Parduodama nuotraukose matomoje komplektacijoje, su priedais.

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, darbinis slėgis: 200 juosta, tuščias svoris: 66 kg, kuras: Super E10 95, garantijos trukmė: 6 mėnesiai, The Kärcher HD 1050 B high-pressure cleaner is a highly efficient unit, suitable even for the toughest jobs on large-scale facilities. During extensive inspection and refurbishment, our service team thoroughly checked the machine for every function. All mechanical parts showing signs of wear or use were replaced with new ones, including: ceramic pistons, seals, bearings, and all O-rings. This ensures long-lasting and trouble-free operation, requiring no additional future investment in the machine. Product Advantages: - The unit features new accessories, including a German-made R+M spray gun, stainless steel lance, braided steel hose, and nozzle. - A robust brass head with new ceramic pistons and seals guarantees long and reliable operation. - The powerful and efficient Honda GX 340 petrol engine provides excellent performance. - With operating parameters of 200 bar and 930 l/h, the machine is ideal for heavy-duty applications in construction, logistics, and agriculture. - Each unit offered includes individually taken photos—you buy exactly the machine you see. Technical Specifications: Engine: Honda GX 340 petrol Pump flow rate [l/h]: 930 Operating pressure [bar]: 200 Maximum pressure [bar]: 250 Weight [kg]: 66 Dimensions (L x W x H) [mm]: 1044 x 549 x 662 Hose length [m]: 10 Isdsza D D Eopfx Alreic Equipment: - NEW high-pressure gun by German brand R+M - NEW 900mm stainless steel lance - NEW reinforced 10m steel-braided hose - NEW nozzle - Water filter and GEKA connector included in the set free of charge.

Būklė: naudotas, Gamybos metai: 2006, Nominalus srautas: 4900 m³/h, minimalus srautas: 3532 m³/h, įsiurbimo antgalis: 250 mm, perteklinis slėgis prie min. srauto: 2740 Pa, oro prijungimo slėgis: 8,5 bar, variklis: 6,5 kW. Sandėliavimo vieta: Nattheim. Iiedjzd An Nopfx Alrsc

Būklė: geras (naudotas), Gamybos metai: 2019, Apie 6–700 m transportavimo technikos sistema, SSI Schäfer, – naudota - Kaina iš vietos (be PVM): tik 79.000 € – demontuota, supakuota ir pakrauta, įskaitant kojas ir kt.! Parduodama tik komplektu! Gamintojas: SSI Schäfer Pagaminimo metai: 2019 Elementų plotis daugiausia apie 47 cm ir 57 cm Dauguma – ritininiai konvejeriai, yra ir juostiniai konvejeriai Ritininės kreivės, Pervedimo įrenginiai, Išskyrikliai, Įvairūs atlenkiami elementai / perėjimo durelės, Su 15 išskyrimo / rūšiavimo linijų Iijdpfx Alozd Tr Ejroc Įskaitant 3 vnt. Mettler Toledo pravažiuojamų svarstyklių Įskaitant valdymo skydą ir valdymo sistemą Įskaitant rutulinių vožtuvų stalus Ilgis apie 700 m – apytiksliai, kadangi plano kol kas nėra; esant didesniam susidomėjimui galimas tikslus matavimas. Būklė: gera Galima naudoti: iš karto (reikia demontuoti) Vieta: Mainco regionas Apžiūrėjimas labai pageidaujamas! Pasiūlyme matomos pratekėjimo lentynos ir sandėlio platforma nėra parduodamos, tačiau taip pat gali būti įsigytos papildomai!

Būklė: labai geros būklės (naudotas), Vötsch VC 4034 klimatinė bandymų kamera / temperatūros bandymų kamera Aprašymas: Parduodama naudota klimatinė ir temperatūros bandymų kamera, pagaminta „Vötsch Industrietechnik“. Ši įranga tinkama sudėtingiems temperatūros ir klimato bandymams tyrimų, vystymo, kokybės užtikrinimo, elektronikos, automobilių pramonės sektoriuose, taip pat medžiagų ir senėjimo testavimui. Kamera buvo modernizuota naudojant šiuolaikinį šaltnešį R452A ir turi patogų jutiklinį valdymo pultą. Didelis bandymų tūris (apie 335 l) suteikia galimybę atlikti tiek pavienių objektų, tiek sudėtingų bandymų konstruktų testavimą. Techniniai duomenys: Gamintojas: Vötsch Industrietechnik GmbH Tipas: VC 4034 Bandymų tūris: apie 335 litrai Bandymų kameros matmenys: apie 580 x 765 x 750 mm (P x G x A) Išoriniai matmenys: apie 780 x 1758 x 1800 mm (P x G x A) Svoris: apie 515 kg Temperatūros diapazonas: -40 °C iki +180 °C Laikinas temperatūros nuokrypis: ±0,1 iki ±0,5 K Erdvinis temperatūros vienodumas: ±0,5 iki ±1,5 K Šildymo greitis: apie 3,2 K/min Aušinimo greitis: apie 3,5 K/min Klimatinė veikla: Temperatūros diapazonas: -40 °C iki +180 °C Drėgmės diapazonas: 10 % iki 98 % sąlyginės drėgmės Laikinas temperatūros nuokrypis: ±0,1 iki ±0,3 K Erdvinis temperatūros vienodumas: ±0,5 iki ±1,0 K Iodpfezd Dm Hjx Alrjic Šaltnešis: R452A Įkrovimo kiekis: 2,5 kg GWP: 2141 CO₂ ekvivalentas: 5,35 t ND maks.: 22 bar(g) HD maks.: 25 bar(g) Energijos tiekimas: 3/N/PE AC 400 V ±10 % / 50 Hz Nominali galia: 4,1 kW Nominali srovė: 12,5 A Įranga: Jutiklinio ekrano valdymas Programuojamos bandymų sekos Nerūdijančio plieno vidus Durų stebėjimo langas Kamera su apšvietimu Recirkuliacijos sistema Šoninė anga matavimo laidams Daug nerūdijančio plieno lentynėlių Oras aušinamas šaldymo blokas Yra dokumentacija Panaudojimo sritys: Temperatūros bandymai Klimato bandymai Medžiagų testavimas Elektronikos bandymai Senėjimo testai Aplinkos simuliacija Kokybės kontrolė Tyrimai ir plėtra Automobilių pramonės testai Būklė: Naudota Optinė būklė matoma nuotraukose. Yra priežiūros ir kalibravimo lipdukai. Šaldymo sistema pritaikyta darbui su R452A. Komplektacija: 1x Vötsch VC 4034 klimatinė bandymų kamera Nerūdijančio plieno lentynėlės Jutiklinio ekrano valdymo pultas Dokumentacija / dokumentai Priedai pagal nuotraukas Techniniai duomenys gali būti keičiami ar papildomi be įspėjimo. Galimas tarpinis pardavimas.

Būklė: labai geros būklės (naudotas), Type: VCS 7034-5 Climatic Test Chamber, Water-Cooled Test chamber volume: 335 litres Performance Data for Temperature Testing: Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Rate of change: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Isdpfjxufypsx Alrsic Performance Data for Climatic Testing: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm 1 port, Ø approx. 50 mm, left side 2 ports, Ø approx. 125 mm, left side 1 port, Ø approx. 125 mm, right side Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R404A / R-23 For your safety as a buyer, please note the following: The following steps are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Please feel free to contact us by phone for further questions.

Būklė: geras (naudotas), Weiss Umwelttechnik GmbH Druskos purškimo kamera / Korozijos bandymų spinta Naudota druskos purškimo kamera Weiss SC/KWT 450, skirta korozijos, druskos purškimo ir kondensato vandens bandymams pagal galiojančius pramonės standartus. Įrenginys tinka medžiagų bandymams, dangų patikrai ir kokybės užtikrinimui. Techniniai duomenys: Gamintojas: Weiss Umwelttechnik GmbH Modelis: SC/KWT 450 Bandymų kameros tūris: 450 litrų Didžiausias apkrovimas: 100 kg Druskos tirpalo bakas: 180 litrų Bandomosios kameros matmenys: apie 850 x 570 x 740 mm (plotis x gylis x aukštis) Išoriniai matmenys: apie 1930 x 800 x 920 mm (plotis x gylis x aukštis) Svoris: apie 180 kg Druskos purškimo bandymai iki +50 °C Kondensato vandens bandymai iki +45 °C Drėkiklis iki +75 °C Energijos tiekimas: 230 V / 50 Hz Nominali galia: 2,0 kW Nominali srovė: 8,5 A Įranga: - Valdymo sistema - Bandymų kamera su bandinių laikikliais - Druskos tirpalo tiekimo sistema - Dokumentacija / techninė instrukcija - Priedai, kaip matyti nuotraukose Komplektacija: - Druskos purškimo kamera Weiss SC/KWT 450 - Dokumentacija - Priedai, kaip pavaizduota nuotraukose Būklė: Naudotas, vizualinė būklė pagal nuotraukas. Iodpfozd Az Asx Alrsic (Techninių duomenų ir informacijos pakeitimai, klaidos galimos!) Pardavimas gali būti nutrauktas anksčiau.

Būklė: geras (naudotas), Weiss Umwelttechnik GmbH Druskos purškimo kamera / Korozijos bandymų spinta Naudota druskos purškimo kamera Weiss SC/KWT 450, skirta korozijos, druskos purškimo ir kondensato vandens bandymams pagal galiojančius pramonės standartus. Įrenginys tinka medžiagų bandymams, dangų patikrai ir kokybės užtikrinimui. Techniniai duomenys: Gamintojas: Weiss Umwelttechnik GmbH Modelis: SC/KWT 450 Bandymų kameros tūris: 450 litrų Iisdpfx Ajzd Axbelrjc Didžiausias apkrovimas: 100 kg Druskos tirpalo bakas: 180 litrų Bandomosios kameros matmenys: apie 850 x 570 x 740 mm (plotis x gylis x aukštis) Išoriniai matmenys: apie 1930 x 800 x 920 mm (plotis x gylis x aukštis) Svoris: apie 180 kg Druskos purškimo bandymai iki +50 °C Kondensato vandens bandymai iki +45 °C Drėkiklis iki +75 °C Energijos tiekimas: 230 V / 50 Hz Nominali galia: 2,0 kW Nominali srovė: 8,5 A Įranga: - Valdymo sistema - Bandymų kamera su bandinių laikikliais - Druskos tirpalo tiekimo sistema - Dokumentacija / techninė instrukcija - Priedai, kaip matyti nuotraukose Komplektacija: - Druskos purškimo kamera Weiss SC/KWT 450 - Dokumentacija - Priedai, kaip pavaizduota nuotraukose Būklė: Naudotas, vizualinė būklė pagal nuotraukas. (Techninių duomenų ir informacijos pakeitimai, klaidos galimos!) Pardavimas gali būti nutrauktas anksčiau.

Būklė: naudotas, Gamybos metai: 2003, veikimo valandos: 36 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1658, rankos pasiekiamumas: 15 200 mm, keliamoji galia: 2 500 kg, vėžės plotis: 3 000 mm, Įranga: kabina, kranas, Pagaminimo metai: 2003 Mašinos numeris: 1658 Vėžė (m): 3,0 Kranas tipas: OBX II Išsikišimas: 15,2 m Keliamoji galia be griebtuvo: 1.900 kg / 15,2 m Griebtuvas: įskaičiuotas Krano išdėstymas: priekyje prie kabinos Kabinos pusė: kairė Pjūklas: 1,3 m Alpha Iiedpfx Alsyglfdjroc !! Pardavimas kliento užsakymu !!

Būklė: labai geros būklės (naudotas), KSE Leak Testing Stand We are offering a KSE Leak Testing Stand. Iodszdzilopfx Alrsic Test bench for automotive applications Testing of electric drives Insulation/leakage testing for electric motors Supply voltage: 400 VAC Control voltage: 24 VDC Connected load: 0.75 kW Type: KSE I/SB-3 Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have any further questions, we will be happy to answer them by phone.