Ingenieurbuero Ks Quick Clean & Test pirkti naudotą (22 290)

Būklė: naudotas, SincoTec Type: Exciting Mot Resonance Test Bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a two-mass oscillator. It consists of a vibration head, which is excited via a frequency-controlled asynchronous motor with an unbalance motor, positioned at the top of the machine and generates the dynamic amplitude. The vibration head is supported on the upper crosshead by pre-loaded compression springs and is guided centrally. The mid-load drive is located at the bottom of the machine and applies the static preload via a geared motor and spindle drive. The specimen chamber is situated above the clamping table and is limited on top by the adjustable crosshead. The control of the test bench is handled by the EXCITING MOT regulation system. The complete control electronics for the regulation system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical Data: General Data Test Bench: Total height of test bench: 1840 to 2240 mm Height of machine table: 1030 mm Width of test bench: 800 mm Depth of test bench: 1500 mm Height of specimen chamber (max.): 600 mm (excluding force transducer) Clear column passage: 550 mm Maximum force amplitude: 10,000 N Maximum total force: ±20,000 N Maximum stroke: ±5 mm Test frequency: 30 to 110 Hz Transducer accuracy: minimum class 1 (according to DIN EN 10002-3) Cjdpfx Aezii Awon Hehc Weight of test bench: approx. 1880 kg Max. weight of clamping fixture: 150 kg General Data Control Cabinet: Total height of control cabinet: 1900 mm Height of table top: 1080 mm Width of control cabinet: 650 mm Depth of control cabinet: 700 mm Weight of control cabinet: 152 kg Color: RAL 9006 (White Aluminium), Tabletop Midnight Site Requirements: Space requirement: 2.5 x 2.5 m Required ceiling height: 2.8 m Floor load capacity: 170 N/cm² Power supply: 400 V / 50 Hz (clockwise phase sequence) Connection plug: CEE socket, 5-pin, 16 A Circuit protection: 16 A Connection and Environmental Conditions Network specifications: Voltage: 400 V three-phase with neutral conductor and protective earth, clockwise phase sequence Voltage fluctuations: < ± 10% Short-term voltage dips: < 20 ms Limits for continuous interference: Interference degree A according to VDE0871 Frequency: 50 Hz ± 1% Protective earth resistance: < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information may be subject to modification!) Further questions can be answered by phone.

Būklė: labai geros būklės (naudotas), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Product Description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is perfectly suited for rapid temperature change tests (e.g. according to IEC, MIL-STD, JEDEC) and has been well maintained. Volume & Internal Dimensions: Test volume: 60 liters Internal basket/test area dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature Ranges & Changeover Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between zones): < 10 seconds Heating rate up to 17 °C/min Cooling rate up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature Deviation & Uniformity Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / Capacity & Lifting System Basket/lifting system capacity: 20 kg maximum load Transfer basket secured by protective mesh on all sides Additional Features & Equipment Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical Connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power approx. 8.5 kW Rated current approx. 25 A Recommended fuse 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Buyer Safety Information: For your safety as a buyer, the following points are carried out in advance on our offered chambers: Chsdezii A Ropfx An Hec 1. Functional check and replacement of necessary components 2. Renewal of refrigerant with legally compliant media if necessary 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data, specifications reserved!) We will be happy to answer further questions by phone.

Būklė: naudotas, Huda technologija HUD-G809 smūgio bandymo sistema Sistema taip pat tinkama akumuliatoriams Maksimali apkrova: 100 kg Stalo dydis: 500 mm x 600 mm Pikines (pusiau sinusinės bangos) smūgio pagreičio diapazonas: 150 - 6000 m/s² Impulso trukmė (pusiau sinuso banga): 0,5 - 30 ms Jeigu impulso trukmė yra mažesnė arba lygi 3 ms, didžiausio pagreičio tolerancija yra ±20 %, impulso trukmės tolerancija – ±15 %. Jeigu impulso trukmė didesnė nei 3 ms, bangos formos tolerancija turi atitikti normoje nustatytus reikalavimus. Greicio tolerancija: ±15 % Hidraulinis stabdis apsaugo nuo pakartotinio smūgio Bendrojo stalo matmenys: 1000 × 750 × 2450 mm Svoris: 3600 kg Galia: 5,5 KVA Chedpfozikb Iex An Hsc 380V ±10% AC50 Hz Būklė: naudota (Pakeitimai ir klaidos techniniuose duomenyse galimi!) Dėl papildomos informacijos prašome susisiekti telefonu.

Būklė: naudotas, RMS valdymo ir matavimo technologija – vibracijų bandymų sistema su priedais Parduodamas aukštos kokybės RMS valdymo ir matavimo technologijos rinkinys su Rietschle ventiliatoriumi, idealiai tinkamas vibracijų bandymams, rezonanso testavimui ir medžiagų tyrimams. Į komplektą įeina: RMS VALDYMO IR MATAVIMO TECHNOLOGIJA – Vibracijos generatorius, tipas SW 6011 Nr. 2230, 30 V – 200 A, 13 mm / 1,2 m/sec / 100 g Laikiklio rėmas, tipas SWT 6211/1 Nr. 6074 – tvirta bandymo objektų tvirtinimo sistema Galios stiprintuvas, tipas TGE 10‑1/7 – optimaliam vibracijos generatoriaus valdymui Rietschle SKG 410‑2.01 ventiliatorius – galingas vakuuminis/spaudiminis pūstuvas Būklė: naudotas Pristatymo apimtis: (žr. nuotrauką) Cedpfxjzikdce An Hshc (Techninės specifikacijos gali būti keičiamos ar netiksliai pateiktos, už klaidas neatsakome!) Dėl papildomos informacijos susisiekite telefonu.

Būklė: labai geros būklės (naudotas), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: For sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of the water protection classes of enclosures or components. With optional equipment, testing according to IPX9K (high-pressure/steam-jet), ISO 20653, and other standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, according to standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible protection classes & tests The SWT system can cover a wide range of tests (depending on configuration): Basic configuration: IPX3 / IPX4 tests (spraying or all-direction splash water). Optional: Higher protection classes up to IPX5 / IPX6 (water jets), and — with suitable high-pressure equipment — up to IPX9 or IPX9K. Chsdpfxjzil T Sj An Hsc Tests are conducted according to standards such as DIN EN 60529 (for IP protection classes) and ISO 20653 (e.g. for vehicle or outdoor applications), depending on requirements and field of application. Typical areas of application Typical application scenarios for such a test chamber include: Electronic devices or enclosures intended for outdoor use or humid environments, e.g. outdoor lighting, control enclosures, power units, panels. Components for vehicles or machinery, especially when exposed to rain, splash water, or high-pressure cleaning (e.g. construction machinery, e-bike or vehicle parts). Batteries or electrical components that must be tested for water resistance – e.g. in the automotive industry or for e-mobility. Technical Data: Suitable protection classes: IPX3 / IPX4 Oscillating pipe radius (for IPX3/4 tests): 200 mm as standard (for SWT 1000), optionally up to 400 mm. Test chamber (interior) Internal dimensions: Approx. 1,000 × 1,015 × 1,000 mm (W×H×D) Operation / control: Web panel or GUI for programming and controlling the tests. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Būklė: naudotas, Zwick Tipas: Z30 Techniniai duomenys: Bendras aukštis: 2114 mm, plotis: 748 mm, gylis: 580 mm Fmax: 30 kN Vmax: 125 mm/s Priedai: Extensometras ClipOn 13,5 mm Extensometras ClipOn 40 mm Kompiuteris + programinė įranga testXpert II V3.5 Cedpezil Ucsfx An Hehc Bendras svoris: apie 500 kg Būklė: naudotas Pristatymo apimtis: (žr. nuotrauką) (Techninių duomenų pakeitimai ir klaidos galimi!) Dėl papildomų klausimų galite kreiptis telefonu.

Būklė: naudotas, Zwick traukimo mašina Tipas: Z20 Valdymas: BX1-EZ020.A4K-000 Techniniai duomenys: Eiga: 200 mm Stūmoklio matmenys (A x P x G): 1037 x 385 x 180 mm Maksimali jėga (Fmax): 20 kN Cjdpjzil Upsfx An Hohc Maksimalus greitis (Vmax): 125 mm/s Priedai: Extensometras ClipOn 13,5 mm Extensometras MFA 25 (temperatūros diapazonas iki +200°C) Kompiuteris + programinė įranga testXpert II V3.5 Klimato įrenginys: Airtemp LKG-K-TK-50-040/150 Temperatūros diapazonas: -40°C iki +150°C Klimato temperatūros diapazonas: 20°C iki +90°C Drėgmės diapazonas: 10% iki 95% Bandomosios kameros talpa: 50 litrų Temperatūros pokytis: 1 K/min Šaltnešis R404, 5 kg Įtampa: 400 V, 3 Ph/n/PE/50 Hz 16 A 9 kW Būklė: naudota / used Bendras svoris apie 1500 kg Komplektacija: (žiūrėti nuotrauką) (Techninių duomenų pakeitimai ir neatitikimai galimi!) Dėl papildomos informacijos maloniai kviečiame susisiekti telefonu. Užsakymus galima pateikti el. paštu arba faksu.

Būklė: labai geros būklės (naudotas), CTS Model: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60 °C to +170 °C 39.6 kW | Test Chamber 1200 L Chedpfx Anezimgas Hsc Description: For sale is a professional climate and temperature test system from CTS GmbH, consisting of a conditioning unit model CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, development, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It provides precise temperature and climate simulations over an extremely wide operating range. This professional climate and temperature conditioning system from CTS GmbH comprises: - Conditioning unit (CSR-60/810/S) - External test chamber (1200 L) The system is designed to supply external test spaces or test chambers with precisely controlled temperature and humidity levels. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, and lifetime testing). Technical Data (from nameplate & manual): General: Manufacturer: CTS GmbH, Hechingen Model: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate: Temperature range: –60 °C to +170 °C Humidity range: 10% to 80% rH Dew point range: +5 °C to +74 °C Electrical data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse: 80 A (slow-blow) Connection type: Hardwired Refrigeration system: Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54; Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test chamber 1200 L: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Important safety information for buyers! The following steps are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certificate 4. Upon successful completion, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data and specifications!) We are happy to answer any further questions by phone.

Būklė: labai geros būklės (naudotas), Zwick / Roell Model: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Test testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC with Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: Tensile & compression Power supply: 230 V / 50–60 Hz / 1-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (from documentation & nameplate) Mechanics / Testing Rated force: 20 kN Test direction: Tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electrical Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Overall height: approx. 1,545 – 2,114 mm (depending on crosshead position) Overall width: approx. 856 mm Overall depth: approx. 650 mm Test area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical equipment Electrical Data Power supply: 230 V AC Phases: 1-phase (1PH, N, PE) Chodpfx Anszimgto Hec Mains frequency: 50 / 60 Hz Current draw: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Measuring & Control Electronics Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics enclosure protection rating: IP32 Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) Zwick / Roell materials testing machine (20 kN) Electronics unit PC workstation (monitor and PC; condition as per photos) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (data carrier) Original operating and technical documentation Various connection and interface cables (Subject to changes and errors in technical data. All information without guarantee!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Stratasys Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is a high-end industrial 3D printer from the FDM (Fused Deposition Modeling) series. It is used worldwide for prototyping, low-volume production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: Codezixy Sepfx An Hohc - Stratasys Fortus 450mc (3D Production System) - Krumm Tec CLEAN MATIC 3150 cleaning system for support material - Badger Magnetics 8 kVA transformer (suitable for EU power networks) The system originates from professional use and has been utilized for the production of high-quality functional components and prototypes. Main Features of the Fortus 450mc: - Industrial FDM 3D printer with large build volume: 406 × 355 × 406 mm - Prints high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* (*depending on material licenses) - Very high dimensional accuracy and repeatability - Network-capable, touchscreen, easy operation - Ideal for prototyping, small batch production, toolmaking, and fixtures Technical Data Fortus 450mc: - Voltage: 120/208 V, 3-phase (transformer included for EU operation) - Power consumption: 18 A - Dimensions approx.: 127 × 91 × 196 cm - Software version per display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150: - Model: CM 3150 US/PS - 4 kW, 400 V, 50 Hz, 16 A - Ideal for removing SR-30 / SUP706 support material - Weight: 140 kg Total weight approx.: 600–700 kg Important Note: "The table shown in the photos is not included in the sale." Scope of Delivery: - Stratasys Fortus 450mc - Krumm Tec CLEAN MATIC 3150 cleaning system - Badger Magnetics 8 kVA transformer (Specifications may be subject to change. Errors and omissions excepted!) Please feel free to contact us by phone for further questions.

Būklė: labai geros būklės (naudotas), Here we offer a temperature test chamber. Water-cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Unit section: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Model: VTS 600/45 RS Chjdpfxeziygmo An Hec Refrigerant: R452 Condition: used Scope of delivery: (see photo) (Technical data and specifications may be subject to change and errors!) We are happy to answer any further questions by phone.

Būklė: naudotas, Espec Model: TSD-100 100-liter usable chamber for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60 °C to +200 °C Temperature range cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) Chodpfx Anszizl Ro Hjc External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Program control via touch panel Automatic defrost Over-temperature protection Operating hours counter Mobile design 2 stainless steel specimen baskets Cable entry Ø 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. Power consumption: 32A Condition: used Weight: 1100 kg Important information for your peace of mind as a buyer! The following points are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New filling with legally compliant refrigerants if required 3. Leak test with certificate 4. After successful inspection, each chamber undergoes a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to alterations and errors!) For further questions, please do not hesitate to contact us by phone.

Būklė: labai geros būklės (naudotas), CTS Type: C-40/350 Climate Test Chamber, Air-Cooled For sale is a professional CTS climate test chamber, model C-40/350. This unit is engineered for demanding environmental simulation in industrial applications, making it ideal for material testing, electronics, automotive, aerospace, and research purposes. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: Approx. 3500 W at +20°C Approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ ±3.0% rel. humidity over time These technical specifications refer to an ambient temperature of +25°C, rated voltage 400V, without test load, without heat compensation, and without additional equipment. Options may affect performance. Technical design: Refrigeration unit: Air-cooled, low-noise, fully hermetic, continuously variable capacity control by electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Grid shelf: Stainless steel, support surface 620 x 600 mm Maximum load per shelf: 35 kg Maximum total load (full shelf configuration): 100 kg Control system: 32-bit controller LCD control panel Digital display of set and actual values Numeric input of set values Error messages in plain text RS 232 interface Ethernet interface Free switching channels for external test item control Dimensions: Test volume: 350 liters Internal dimensions: height 750 mm × width 650 mm × depth 720 mm Cedpfx Aozizmzjn Hshc External dimensions: height 1800 mm × width 920 mm × depth 1670 mm Operating data: Electrical connection: 400V 3/N, 50 Hz Rated power: 7.1 kW Rated current: 11.5 A Protection class: IP 54 Sound pressure level: -

Būklė: labai geros būklės (naudotas), Vötsch temperatūrinių smūgių bandymų kamera Tipas: VT 7012 S2 Gamintojas: Vötsch Industrietechnik GmbH Vykdymas: aušinama vandeniu Parduodama Vötsch temperatūrinių smūgių bandymų kamera su dviem kameromis, skirta greitiems temperatūrų pokyčių bandymams. Tinka pramonės, automobilių, aviacijos sektoriams bei moksliniams tyrimams ir plėtrai. Temperatūros diapazonai: Šilta kamera: +50 °C iki +220 °C Šalta kamera: -80 °C iki +70 °C Temperatūriniai duomenys: Temperatūros nuokrypis laiko atžvilgiu: ±1 K Temperatūros nuokrypis erdvėje: ±2 K Šiltos kameros šildymo greitis: apie 11 K/min Šaltos kameros šildymo greitis: apie 2 K/min Aušinimo greitis: apie 3 K/min Bandymų erdvė: Tūris: apie 125 litrų Vidiniai matmenys: apie 470 x 650 x 410 mm Kabelių pravedimas: Ø 67 mm Elektriniai duomenys: Jungtis: 3/N/PE AC 400 V ±10% / 50 Hz Nominali galia: apie 10 kW Nominali srovė: apie 25 A Šaltnešis: R404A: 2,9 kg R23: 1,27 kg Slėgio duomenys: ND maks.: 22,5 bar HD maks.: 25 bar Matmenys: apie 930 x 2115 x 1970 mm Svoris: apie 1000 kg Įranga: Dvikamerinė smūginių bandymų sistema Skaitmeninis valdymas Programinis veikimas Stebėjimo langas Kabelių pravedimas Būklė Naudota Optinė būklė pagal nuotraukas Yra įprastų sandėliavimo ir naudojimo žymių Komplektacija: Vötsch VT 7012 S2 temperatūrinių smūgių bandymų kamera Priedai pagal nuotraukas Svarbi pastaba: Visi duomenys pateikti pagal geriausias žinias, remiantis nuotraukomis, tipų lentelėmis ir gamintojo informacija. Galimas pristatymas. Chjdpfxsy Iyuws An Hjc Pasiliekama teisė keisti techninius duomenis, daryti klaidas ar parduoti iš anksto. Dėl papildomos informacijos kviečiame skambinti telefonu.

Būklė: labai geros būklės (naudotas), Weiss WT-1300/70/15 Temperatūros bandymų kamera Gamintojas: Weiss Umwelttechnik GmbH Tipas: WT-1300/70/15 Vandeniu aušinama temperatūros bandymų kamera su liečiamu ekranu valdymui, skirta temperatūros bandymams moksliniams tyrimams, plėtrai, kokybės užtikrinimui ir pramonei. Techniniai duomenys Temperatūros diapazonas: nuo -70 °C iki +180 °C Bandymų kameros tūris: apie 1340 litrų Temperatūros pakilimo greitis: 15 K/min Temperatūros sumažėjimo greitis: 10 K/min Temperatūros nuokrypis laike: ± 0,1 iki ± 0,5 K Temperatūros tolygumas erdvėje: ± 0,5 iki ± 2 K Bandymų kameros išmatavimai: Aukštis 920 mm Plotis 1100 mm Gylis 1330 mm Išoriniai matmenys: Aukštis apie 2050 mm Plotis apie 1300 mm Gylis apie 3200 mm Leistina bandinių apkrova: Kameros grindys 150 kg Įdedamas tinklelis 50 kg Elektriniai duomenys Nominali įtampa: 3/N/PE AC 400 V ±10 % 50 Hz Nominali srovė: 63 A Nominali galia: 44 kW Šaldymo įranga Šaltnešis R404A: 14,0 kg Šaltnešis R23: 5,4 kg R404A LP maks.: 18 bar R404A HP maks.: 25 bar R23 LP maks.: 19 bar R23 HP maks.: 25 bar Stovio slėgis: 18,5 bar Įranga Liečiamas valdymo ekranas Nerūdijančio plieno bandymų kamera Kelios įdėjimo pakopos Įvadai šone Šildomas durų sandariklis Vandeniu aušinamas šaldymo blokas CEE jungtis CE ženklinimas Svoris: apie 1500 kg Būklė Naudotas prietaisas iš pramoninės eksploatacijos. Išvaizda pagal pateiktas nuotraukas. Siekiant užtikrinti klientų saugumą, siūlomoms klimato kameroms iš anksto atliekami šie darbai: 1. Funkcionalumo patikra ir būtinų komponentų keitimas 2. Esant poreikiui, užpildymas nauju reikalavimus atitinkančiu šaltnešiu 3. Sandarumo patikra su sertifikatu 4. Dokumentuotas bandomasis veikimas po sėkmingo patikrinimo Komplektacija: žr. nuotraukose Cjdpfsza Dv Iox An Hshc Galimas siuntimas arba transportavimas per ekspediciją. Pasiliekame teisę keisti informaciją, suklysti ar prekę parduoti kitur. Papildomus klausimus mielai atsakysime telefonu.

Būklė: labai geros būklės (naudotas), Haida Model: HD-B604-S Sensor: TECSIS load cell Max. capacity: 2T / 20 kN Units: G, kg, N, LB (selectable) Resolution: 1/250,000 Accuracy: ± 0.5% Max. stroke: 700 mm (without fixture) Test speed: 0.1-500 mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Clamping range: 0-7 mm Weight: approx. 175 kg Dimensions (W x D x H): 88 x 50.5 x 150 cm Condition: used Codpfx Anozgr Eie Hohc Scope of delivery: (see image) (Specifications and data subject to change and errors reserved!) If you have any further questions, we would be happy to answer them by phone.

Būklė: naudotas, Patikrinta funkcionalumą; prekė yra išmontuota iš automobilių tiekėjo įrangos Kiekis: 5 vnt. prieinama Gamintojas: Stahl Prüftechnik Tipas: FR-110.01A Funkcija: Bandymo įrenginys funkcijų ir procesų stebėsenai pramoninėse taikymuose Maitinimas: 230 V AC Ekranas: LED / skaitmeninis ekranas Chsdpezh A D Ejfx An Hjc Korpusas: metalinis Pritaikymas: kokybės užtikrinimas, sandarumo bandymai, procesų kontrolė

Būklė: labai geros būklės (naudotas), Weiss Type: SWT 200/400 Weiss Spray and Splash Water Test Cabinet This unit is used to test the ingress of water into housings. In conjunction with a timer, the test cycle can be automated with an adjustable testing duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for tests based on protection classes IPX3 and IPX4. The integrated water recirculation system minimizes water consumption. Features Glass door with wiper Pneumatic drive for the oscillating tube Adjustable oscillation angle Interchangeable oscillating tubes Swiveling and replaceable nozzle holders Adjustable and measurable water flow rate Control of test duration Mechanical Load Data Max. load capacity (evenly distributed over surface) Permitted specimen weight for sample carrier (total): 25 kg Spray radius: 200 mm / 400 mm Data for IP protection class tests Oscillation speed: approx. 60°/s Cjdpfx Ajzh D Rmen Hjhc Oscillation angle IPX3: approx. ±60° Oscillation angle IPX4: approx. ±180° -10° Dimensions: External dimensions incl. control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 1.5 kW Rated current: 6.0 A Weight: 375 kg Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Gamybos metai: 2018, būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 15 kg, vidinis aukštis: 95 mm, vidinis ilgis: 260 mm, neigiamas slėgis: 10 000 Pa, Nėra minimalaus kainos – garantuotas pardavimas už aukščiausią pasiūlytą kainą! Valymo mašina kaip vienos kameros užliejimo įrenginys su pilnu vakuumu. Mašina 2026 metais buvo kapitališkai suremontuota už 16.800 € sumą ir yra labai geros būklės. Naujos mašinos kaina buvo 104.000 €. TECHNINĖ INFORMACIJA Valymo terpė: behalogeninis angliavandenilis arba modifikuotas alkoholis Valymo krepšelio matmenys: 260 x 160 x 95 mm Maksimalus partijos svoris: 15 kg MAŠINOS DUOMENYS Bendras ilgis: 1.260 mm Bendras plotis: 1.110 mm Bendras aukštis: 2.600 mm Bendras svoris: 1.600 kg Chedozh Eiqjpfx An Hoc KOMPLEKTACIJA CE ženklinimas riedančios standartinės komplektacijos Atitinka 31-ąjį Vokietijos BImSchV (2021-08-21 redakcija) Atitinka Šveicarijos oro taršos reglamentą (1998-03-01 redakcija) Atitinka Austrijos VAV reglamentą (2022-07-26 redakcija) Atitinka ES TVOC direktyvą 199/13

Būklė: labai geros būklės (naudotas), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal supports to increase the load-bearing capacity of the base Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Csdpozh Htwefx An Hshc Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg Important safety information for buyers! The following steps are carried out in advance for the chambers we offer: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data; all information without guarantee!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Liebisch Type: S 1000 A-TR / 42016211 Chest-type chamber with 1,000-liter test volume for salt spray testing. Constamatic® TR This series features automatically controlled chest chambers of the type A-TR. The integrated device control is operated via a touchscreen. All functions are displayed through an intuitive touchscreen user interface. Technical Specifications: Device type: S 1000 A-TR External dimensions (W x D x H in mm): 2600 x 1120 x 1210 Internal test area dimensions (W x D x H in mm): 1535/1425 x 800/780 x 660/650 Maximum sample holder load: 10 kg per level, 10 kg total Operating voltage: 230 V +6/-10% Power rating S: 2700 W Cedpfx Anjzh Ht Re Hjhc Humidification control range S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device protection: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1,000 liters Test solution reservoir: approx. / 150 liters Test solution consumption/hour: approx. / 0.7–1.0 liters Water fill volume (floor sump) KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data; information is non-binding!) For further questions, we are happy to assist you by phone.

Būklė: geras (naudotas), Heraeus Vötsch Model: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Chedpfx Aozg Tpisn Hoc Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: width 580 mm, depth 765 mm, height 750 mm External dimensions: width 870 mm, depth 1595 mm, height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1 m distance (free-field measurement): < 69 dB(A) Side cable entry: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R-404A and R-23 Weight: approx. 570 kg Important information for your safety as a buyer! The following measures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data reserved!) For further questions, feel free to contact us by phone.

Būklė: geras (naudotas), Heraeus Vötsch Model: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: width 580 mm, depth 765 mm, height 750 mm External dimensions: width 870 mm, depth 1595 mm, height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1 m distance (free-field measurement): < 69 dB(A) Side cable entry: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R-404A and R-23 Weight: approx. 570 kg Important information for your safety as a buyer! The following measures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data reserved!) Cedpfx Anjzg Tp No Hjhc For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display of target and actual values - Numerical input of target values - Error messages in plain text - RS 232 interface - Free switching channels for external specimen control Technical Specifications Temperature Testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat emission: approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without specimen, without irradiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Nominal power: 8.8 kW Nominal current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Codpfxjzg Ty Io An Hjhc Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information reserved!) If you have further questions, we will be happy to answer them by phone.

Būklė: geras (naudotas), H. Köhler HK 300 S kondensato vandens tikrinimo įrenginys Gamintojas: H. Köhler GmbH Tipas: HK 300 S Įrenginio tipas: kondensato vandens tikrinimo įrenginys / korozijos bandymų kamera Bandymo kameros tūris: apie 300 l Parduodamas naudotas H. Köhler HK 300 S kondensato vandens tikrinimo įrenginys. Įrenginys skirtas kondensato klimato bandymams pagal DIN 50 017, korozijos bandymams, dengimo bandymams, dažų bandymams, medžiagų bandymams bei kokybės kontrolei. Techniniai duomenys Bandymo kameros tūris: apie 300 l Temperatūros diapazonas: nuo kambario temperatūros iki maždaug +55 °C Drėgmės diapazonas: galimas prisotinimo režimas Bandymo kameros šildymas: 1 000 W Maitinimo įtampa: 230 V / 50 Hz Bendra galia: 1 000 W Suslėgto oro suvartojimas vėdinant: apie 3 Nm³/h Suslėgto oro prijungimas: 4,5 – 7,0 bar Demineralizuoto vandens prijungimas: 2,5 – 4,0 bar Matmenys (P × G × A): apie 1 200 × 600 × 1 750 mm Svoris: apie 100 kg Valdymas HK PC102 valdiklis LCD ekranas Programuojamos bandymų sekos Kondensato klimatas pagal DIN 50 017 Rankinis / bandymo režimas Cjdpfezhadcox An Hohc Pavojaus signalų rodymas Įranga Nerūdijančio plieno bandymo kamera Didelės stiklinės durelės su tarpine Bandymo kameros termometras Manometras Vėdinimo sistema Suslėgto oro prijungimas Demineralizuoto vandens prijungimas Nuotekų prijungimas Nerūdijančio plieno pagrindas su ratukais Priedai pagal nuotraukas Būklė Naudota Optinė būklė pagal nuotraukas. Ekranas rodo kondensato klimato DIN 50 017. Dokumentai nepridedami. Pristatymo komplektacija H. Köhler HK 300 S kondensato vandens tikrinimo įrenginys Nerūdijančio plieno pagrindas Priedai pagal nuotraukas Pristatymo komplektacija, kaip pavaizduota. Pasiliekama teisė keisti informaciją, padaryti klaidų ar parduoti įrenginį anksčiau nei paskelbta.