Cc Technology Cyclone Maxi pirkti naudotą (39 364)

Būklė: naujas, darbinis slėgis: 210 juosta, aukšto slėgio žarnos ilgis: 20 000 mm, įėjimo įtampa: 400 V, bendras svoris: 160 kg, garantijos trukmė: 24 mėnesiai, temperatūra: 155 °C, The HDS 10/21-4 MXA eB with automatic hose reel and integrated Ultra Guard high-pressure hose is among the most powerful hot water pressure washers in the mid-range segment, impressing further with thoughtful ergonomics and high user-friendliness. Its slow-running, 4-pole water-cooled electric motor, robust 3-piston axial pump with ceramic pistons, as well as the efficient eco!efficiency mode, ensure maximum output alongside reliable and economical operation. Additional highlights include optimized burner technology, dual detergent tanks, a convenient mobility concept, comprehensive safety systems, intuitive single-switch operation, and intelligent accessory storage solutions. Technical Data: Condition: NEW Power supply (Ph/V/Hz): 3 / 400 / 50 Flow rate (l/h): 500 - 1000 Operating pressure (bar): 30 - 210 Temperature (with 12°C intake): min. 80 – max. 155 Connected load (kW): 8 Heating oil or gas consumption full load (kg/h): 7.3 Heating oil eco!efficiency (kg/h): 5.8 Power cable (m): 5 Fuel tank (l): 25 Weight (with accessories) (kg): 160.2 Dimensions (L × W × H) (mm): 1330 x 750 x 1060 Scope of delivery: Spray gun: EASY!Force Advanced HD hose length: 20 m, DN8, 315 bar Spray lance: 1050 mm Power nozzle Eco! Booster TR 033 nozzle with wide spray pattern Servopress pressure control Equipment features: Integrated automatic hose reel Detergent function: 20- + 10-litre tanks ANTI!Twist Tanks for detergent, scale protection, and fuel accessible from outside Control panel with illuminated indicators Pressure shut-off Phase reversing plug (3~) 2 detergent tanks Dry run protection Automatic hose reel: – Scratch-resistant and smooth Ultra Guard HD hose with Teflon® coating. – Automatic hose reel for convenient and secure storage of the 20-metre high-pressure hose. Operational safety: – Easily accessible water filter protects the pump from waterborne debris. – Safety valves as well as water and fuel shortage protection ensure device uptime. – The Soft Damping System (SDS) compensates for vibrations and pressure spikes in the high-pressure system. Accessory storage directly on the unit: – All accessories can be stored directly on the unit. There are 2 hooks for suction hose and power cable. – Spacious storage compartment, e.g., for detergents, gloves, or tools. Detergent dosing: Itsdpfey E Nplex Ah Ujl – Simple switching between detergent tank 1 and 2. – Precise detergent dosing with rinse function. Mobility concept: – Jogger principle with large, rubber-tired wheels and castor. – Integrated tilting aid for labor-saving transport over steps. – Push handles for easy transport and maneuverability. Simple controls: – One switch for all machine functions.

Būklė: labai geros būklės (naudotas), Keysight / Agilent InfiniiVision MSO-X 3034A Gamintojas: Keysight Technologies / Agilent Technologies Tipas: MSO-X 3034A Serija: InfiniiVision Prietaiso tipas: Mišrių signalų osciliografas / Skaitmeninis atminties osciliografas Dažnių juosta: 350 MHz Parduodamas naudotas Keysight / Agilent InfiniiVision MSO-X 3034A mišrių signalų osciliografas. Osciliografas puikiai tinka tiksliems signalų ir matavimo uždaviniams kūrimo, laboratorijos, techninio aptarnavimo, mokymo, tyrimų bei pramoninės elektronikos ir kokybės užtikrinimo srityse. Su 4 analoginiais kanalais, 16 skaitmeninių kanalų ir maksimaliu ėminių ėmimo dažniu 4 GSa/s, įrenginys siūlo plačias naudojimo galimybes sudėtingiems matavimo uždaviniams. Techniniai duomenys Gamintojas: Keysight Technologies / Agilent Technologies Serija: InfiniiVision Tipas: MSO-X 3034A Prietaiso tipas: Mišrių signalų osciliografas / Skaitmeninis atminties osciliografas Dažnių juosta: 350 MHz Analoginiai kanalai: 4 Skaitmeniniai kanalai: 16 Maks. ėminių ėmimo dažnis: 4 GSa/s Ekranas: spalvotas ekranas MegaZoom technologija Įėjimai: 4 × BNC analoginiai Loginis / skaitmeninis įėjimas USB Host USB Device Trigger Out Išorinis trigeris / Kalibravimo jungtis Maitinimas: 100–240 V AC Dažnis: 50 / 60 Hz Didžiausia galia: max. 100 W Matmenys (P × A × G): apie 381 × 204 × 142 mm Svoris: apie 4 kg Įranga Didelis spalvotas ekranas Priekiniai valdymo mygtukai 4 analoginiai kanalai 16 skaitmeninių kanalų MegaZoom technologija USB Host USB Device Trigerio ir analizės funkcijos Matavimo, atminties ir spausdinimo funkcijos Nešimo rankena 3 zondai pagal nuotraukas Maitinimo laidas Priedai pagal nuotraukas Panaudojimo sritys Elektronikos kūrimas Laboratorija Servisas Gedimų diagnostika Signalo analizė Plokščių testavimas Mokymas Tyrimai ir plėtra Kokybės užtikrinimas Pramoninė elektronika Komplektacija Itodpfxjzh I Dws Ah Uol Keysight / Agilent InfiniiVision MSO-X 3034A 3 zondai pagal nuotraukas Maitinimo laidas Priedai pagal nuotraukas Būklė Naudota. Optinė būklė pagal nuotraukas. Kontrolės / ženklinimo lipdukai matomi nuotraukose. Komplektacija pagal aprašymą ir nuotraukas. Galimi pakeitimai, klaidos ir tarpinis pardavimas.

Būklė: naudotas, rida: 118 000 km, galia: 96 kW (130,52 AG), pirmoji registracija: 09/2017, kuro tipas: dyzelinas, bendras svoris: 3 500 kg, spalva: sidabras, pavaros tipas: mechaninis, emisijos klasė: Euro 6, sėdimų vietų skaičius: 3, bendras ilgis: 6 000 mm, bendras plotis: 2 050 mm, bendras aukštis: 2 520 mm, Įranga: ABS, centrinis užraktas, oro kondicionavimas, suodžių filtras,

Būklė: naujas, Gamybos metai: 2026, CORMAK PT310ECO Planer Thicknesser with Cutterblock – Precision Machining and Work Efficiency The CORMAK PT310ECO is a modern planer thicknesser engineered for high-quality finishing, reliability, and low noise operation. Outfitted with a cutterblock, this advanced woodworking machine combines the functionality of a jointer and thickness planer within a robust, integrated design. Its sturdy construction and powerful motor make it a versatile solution for professional woodworking, ideal for both joinery workshops and craft studios. Key Features • Cutterblock – Three HSS knives (310x25x3 mm) ensure long service life, precise planing, and reduced noise levels. Ijdsw Ab Twjpfx Ah Uotl • Heavy-duty work tables – Cast iron tables minimize vibrations and guarantee stable material feed. • High power output – 2.2 kW (S1) / 2.6 kW (S6) motor offers consistent performance even during intensive operation. • Large working area – 310 mm working width and height up to 180 mm for processing a variety of workpieces. • Efficient chip extraction – Ø100 mm extraction port allows for easy connection to dust extraction systems. Construction and Technology The PT310ECO model features a 75 mm diameter cutterblock, ensuring smooth operation and greater durability compared to traditional knives. The planer thicknesser is equipped with wear-resistant cast iron work tables measuring 1290x310 mm (planer) and 540x310 mm (thicknesser). The machine also includes an adjustable fence (90–45°), enabling precise guidance of workpieces at an angle. Precision and Work Efficiency This unit offers a maximum cutting depth of 3 mm in jointer mode and 4 mm in thicknesser mode. With a cutterblock speed of 5,500 rpm and a stable design, it provides surfaces ready for gluing, varnishing, or further processing. This is a highly reliable thickness planer suitable for both series production and small-batch projects. Applications The PT310ECO Planer Thicknesser is designed for: • professional woodworking and furniture workshops, • prototype workshops and training centres, • maintenance departments in industrial plants, • technical schools and vocational institutes. Standard Equipment • Three-knife cutterblock • Cast iron work tables • Cutterblock guard • Ø100 mm chip extraction port • Feed and safety switches Optional Accessories • Mobile undercarriage • Chip extraction system Technical Specifications Planer table dimensions: 1290x310 mm Thicknesser table dimensions: 540x310 mm Cutterblock diameter: 75 mm Cutterblock speed: 5,500 rpm Number of knives / size: 3 / 310 x 25 x 2.5 mm Fence tilt: 90–45° Chip outlet: 100 mm Maximum thicknessing height: 180 mm Max cutting depth: 3 mm (planer) / 4 mm (thicknesser) Motor power (S1/S6): S1: 2.2 kW / S6: 2.6 kW Maximum workpiece width: 310 mm Weight (gross): 200 kg Choose efficiency and durability. Select the CORMAK PT310ECO Planer Thicknesser with Cutterblock for top-tier woodworking standards in your production. Contact our technical advisor today.

Būklė: naujas, Gamybos metai: 2026, The INDUSTRY 2.0 series distinguishes itself from the standard series through the use of the best and most precise motors and drive gearboxes in its class, significantly enhancing the machine's machining capabilities and making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling router with a working area of 1500 x 3000 mm and a Z-axis clearance of 300 mm is equipped with a 6 kW electrospindle running at 24,000 rpm, with ceramic bearings. The machine’s worktable features hybrid technology – it includes vacuum sections and sub-sections for automatic, non-invasive clamping of the material being processed, as well as T-slot rails for manual clamping. A Becker KVT 3.140 vacuum pump is included with the milling machine. Manufacturer: TechnologieCNC Model: 1530 INDUSTRY 2.0 Electrospindle: 6 kW, 24,000 rpm, full-ceramic bearings Max. traverse speed (idle): up to 33 m/min Max. working speed (in material): up to 25 m/min Software resolution: 0.01 mm Mechanical resolution: 0.04 mm Work area X/Y/Z: 1500 x 3000 x 300 mm – Hybrid table (vacuum + T-slot) Controller: NK-105 controller High working speeds and process stability are ensured by using Leadshine EASY-SERVO drives with encoder and power transmission via SHIMPO planetary gearboxes Software: CAD/CAM standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Dimensions: For transport – 365 / 210 / 220 Itjdpfetu S Srsx Ah Uel Assembled and ready for operation – 365 / 245 / 230 A hybrid table, i.e., a vacuum table that allows non-invasive mounting of the workpiece, while also enabling manual clamping of irregular shapes The machine frame is fully welded, stress-relieved (annealed), and then milled, ensuring precise machining and operational stability Machine control handled by the NK-105 DSP controller Tool height sensor included as standard Central automatic oil lubrication system for carriages and rails Drive transmission by reduction gearbox The machine travels on all axes (X, Y, Z) on high-quality PMI 25-mm linear guides and bearings LEADSHINE Easyservo dual-servo drive on the Y-axis All wiring is made with high-quality flame-retardant cables Electrical cables used in the machine are flexible and protected against deformation.

Gamybos metai: 2014, būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, This is a rack conveyor dishwasher from the premium manufacturer Meiko, model K-M 74 V8 N33 P8, built in 2014. No guarantee can be given regarding the completeness or defect-free condition of the rack conveyor dishwasher. The system was taken over by us after being dismantled. The machine is probably only of interest to Meiko technicians who are experienced professionals. Whether to reassemble or use for spare parts is up to the expert. Make us an offer—we need the space! The M-iQ by MEIKO is a milestone in dishwashing technology development: it delivers the highest cleanliness, outstanding efficiency, and optimal resource balance. Four key MEIKO innovations make this exceptional progress possible: intelligent air management, superior filter technology, a compelling energy concept, and ideal user convenience with the glass CC touch display. The machine is divided into an infeed section, pre-sorting zone, main wash zone, rinse zone, drying zone, and outfeed zone. You will receive an invoice with VAT shown. Technical data: - Machine type: K-M74 V8 N33 P8 - Serial number: 10270806 - Year of manufacture: 2014 - External dimensions W x D x H: 3950 x 995 x 2235mm - Dimensions outfeed roller conveyor W x D x H: 2100 x 680 x 850mm - Infeed table dimensions W x D x H: 3290 x 630 x 850mm - Total length of dishwasher: 9340 mm - Electrical connection: 400V 50Hz 3NPE 45.9kW - Cold water connection: 3/4"; demineralized - Condition: Used Further information: - MiQ system diagnostics: verified hygiene safety; schedulable washing cycles; secured washing results - Modular, bolted design Iodpfxey Ibbfe Ah Uetl - M-iQ Air Concept: maximum energy efficiency; uncompromising DIN compliance; no exhaust air connection required - M-iQ self-cleaning: innovative cycling principle; supported by M-iQ filter; reduced cleaning workload - M-iQ energy concept: three-stage heating power; dynamic adjustment; optimal energy balance - M-iQ washing dynamics: high pressure – reduced volume; optimized flow geometry - M-iQ tank management: intelligent level control; efficient resource utilization; outstanding economy - M-iQ filter: revolutionary filter system; active dirt removal; highest process efficiency Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and error. Do you have questions, need advice or want to view the item on site? You can reach us by telephone during our business hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is exclusively subject to our general terms and conditions (GTC).

Būklė: naudotas, rida: 148 300 km, galia: 103 kW (140,04 AG), pirmoji registracija: 03/2018, kuro tipas: dyzelinas, tuščias svoris: 2 820 kg, bendras svoris: 3 500 kg, kuras: dyzelinas, spalva: pilkas, vairuotojo kabina: kitas, pavaros tipas: mechaninis, emisijos klasė: Euro 6, pakaba: kitas, sėdimų vietų skaičius: 9, bendras ilgis: 7 004 mm, statybinis aukštis: 3 080 mm, Įranga: ABS, autonominis šildytuvas, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, oro pagalvė, priekabos jungtis, stumdomos durys, suodžių filtras, trauki kontrolė,

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 strokes/min | Fully automatic | Swiss top quality Technical Highlights: Rated force: 600 kN Strokes: 100–800 per minute Max. feed length: 200 mm Year of manufacture: Unknown (no nameplate) / Function test: 2025 Drive power: 30 HP Control voltage: 24 V AC Power connection: 440 V AC / 50 Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 / 51 / 58 / 64 / 70 / 76 mm Adjustment height/Ram height adjustment: 80 mm Operating dimensions: Max. tool mounting width: 620 mm Strip width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max. strip width: 300 mm Max. feed pitch: 200 mm Max. material thickness: 6 mm Feed angle: 180° Machine dimensions: Footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Equipment: BBV 300 feed system – fully synchronized mechanical strip feeder Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Machine in excellent technical and visual condition Fully tested Immediately available in Europe Worldwide shipping possible Contact us today for pricing and further technical details. Itedpfxoxz Ugxe Ah Uel We are pleased to support you in modernizing your production line with Swiss precision technology.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 1 300 mm, pjovimo plotis (maks.): 1 300 mm, bendras svoris: 9 000 kg, ruošinio svoris (maks.): 8 000 kg, pjūklo pavara: 11 000 W, Parduodamas pramoninis, visiškai automatizuotas staklinių ir konstrukcinių elementų paketo pjovimo įrenginys – kompleksiška technologinė linija, skirta paketus nustatytu ilgiu apdoroti. Įrenginys skirtas naudoti medienos apdirbimo įmonėse ir medinių konstrukcijų gamyklose, kur svarbiausi yra proceso efektyvumas, pjovimo ilgio tikslumas ir paketo stabilumas pjaunant. Galima apžiūrėti ir išbandyti „Delfina 20“, 98-354 Siemkovicė, Lenkija. Techniniai parametrai: • Maksimalus paketo dydis: 1300 × 1300 mm (plotis / aukštis) • Maksimalus įvedamo paketo ilgis: 6000 mm • Maksimalus pjovimo ilgis: 3000 mm • Minimalus pjovimo ilgis: 600 mm • Maksimali paketo svoris: 8000 kg • Pjovimo tikslumas: ±2 mm Minimalus paketo skerspjūvis priklauso nuo hidraulinių prispaudiklių galutinės padėties – galima pjauti mažesnių matmenų paketus. Pjovimo modulis: • Pagrindinis variklis 11 kW • HIWIN linijiniai bėgeliai, pasižymintys didesne apkrova • GB TITANIUM bėgelis + STIHL grandinė • Automatinė bėgelio tepimo sistema • Tvirti agregato konstrukcijos elementai užtikrina stabilų darbą ir tikslų pjovimo ilgį. Paketo stabilizacija: • 6 hidraulinių prispaudiklių sistema (viršutiniai + šoniniai + priekiniai ir už pjovimo linijos) • Paketo prilaikymas prie vertikalių ritinėlių • Paketo judėjimo eliminavimas pjaunant Proceso automatizavimas: • Pažangi paketo tvirtinimo sistema • Automatinis tvirtinimo vietų nustatymas • Galimybė atlikti automatinį pradinį pjovimą • Atpjautų paketų kaupimo sistema Transportavimas ir manipuliavimas: • Skersinis pakrovimo konvejeris • Skersinis iškrovimo konvejeris • Automatinis paketų surinkimas po pjovimo Atliekų šalinimas: • Juostinis atliekų konvejeris (~10 m) • Hidrauliniai pasviriami pjovimo modulio ritinėliai Itedpfxoxn Rt Us Ah Usl (apsauga nuo didelių atliekų užstrigimo) Automatika: • PLC valdiklis Siemens • Yaskawa servovarikliai ir dažnio keitikliai • 21–22 colių valdymo skydelis • Nuotolinė techninė priežiūra ir diagnostika Papildomai: • Žiemos paketas – valdymo sistemos pašildymas • Transportavimas iki kliento – įskaičiuota į kainą • Montavimas – įskaičiuota į kainą • Paleidimas – įskaičiuota į kainą • Operatorių mokymas – įskaičiuota į kainą

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Source Technology PowerHeater und FlexiCut Maschinen. Direkt aus einer fleischfreien Produktionsstätte, eingesetzt zur Herstellung vegetarischer „Chicken Style“-Produkte. Die Maschinen sind in hervorragendem Zustand und gebraucht nur selten erhältlich. Neupreis dieser Anlagen liegt bei £750.000. Iodpfx Ahst Rh T Do Ustl

Būklė: naujas, Gamybos metai: 2026, „CORMAK“ prekės ženklo didelio našumo ventiliatorius „FAN 11“ – tai aukščiausios klasės pramoninė įranga, skirta intensyviai pašalinti oro priemaišas gamybos įmonėse. Dėl iki 15 445 m³/h našumo ir 11 kW galios variklio šis ventiliatorius efektyviai pašalina medienos, metalų ir plastikų apdirbimo metu susidarančias medžio drožles, dulkes ir pjuvenas. Jis idealiai tinka kaip patikimas pjuvenų šalinimo įrenginys tiek medienos apdirbimo, tiek žemės ūkio ir chemijos pramonėje. Pagrindiniai įrenginio privalumai: * Aukštas oro srauto našumas: iki 15 445 m³/h * Galingas 11 kW variklis: užtikrina stabilų ir efektyvų veikimą * Tvirtas plieninis korpusas: atsparus mechaniniams pažeidimams ir korozijai * Universalus pritaikymas: idealiai tinka kaip pjuvenų pūstuvas įvairiose pramonės šakose * Tylus ir energiją taupantys darbas: optimizuotas energijos sąnaudoms * Galimybė montuoti įvairiose konfigūracijose: pritaikomas prie įmonės poreikių Itodpfovugfwsx Ah Ujl Konstrukcija ir technologija „CORMAK FAN 11“ radialinis ventiliatorius pagamintas naudojant aukšto našumo radialinio rotoriaus technologiją ir konstrukciją, užtikrinančią didelį atsparumą pramoninėms sąlygoms. Rotorius su tinkamai profiliuotais mentėmis leidžia efektyviai pernešti didelius oro kiekius, kartu generuojant didelį vakuumą. Įrenginio korpusas pagamintas iš suvirinto, didesnio stiprumo plieno, o tai garantuoja ilgaamžiškumą, net ir veikiant nuolatiniu režimu. Tikslumas ir našumas Tiksliai subalansuotas rotorius, patvarus elektros variklis ir patobulinta aušinimo sistema užtikrina, kad „FAN 11“ ventiliatorius veiktų patikimai ir ilgai, be perkaitimo rizikos. Įrenginys palaiko aukštus oro srauto parametrus net ir sudėtingomis sąlygomis, atitinkdamas didelių dulkių šalinimo įrenginių reikalavimus. Jis idealiai tinka pjuvenoms pašalinti iš didelių apdirbimo staklių, silosų sistemų ar gamybos linijų. Pritaikymas „CORMAK FAN 11“ pjuvenų ventiliatorius naudojamas: * stalių dirbtuvėse ir baldų fabrikuose * metalų, plastikų ir chemijos pramonėje * žemės ūkio sandėliuose ir džiovyklose * automatizuotose gamybos linijose ir dulkių šalinimo sistemose Standartinė komplektacija: * Komplektas radialinio ventiliatoriaus su 11 kW varikliu * Tvirtas plieninis korpusas su įleidimo/išleidimo įvadais * Radialinis rotorius, pritaikytas nuolatiniam darbui Papildoma įranga: * Jungčių skersmens mažintuvai * Visų montavimo elementų komplektas * Filtrų sistemos arba ciklonai Techniniai parametrai: * MAKS. ORO NAŠUMAS: 15 445 m³/h * ĮLEIDIMO SKERSMUO: 350 mm * IŠLEIDIMO SKERSMUO: 350 mm * SLĖGIS: 3187–2019 Pa * MATMENYS: 920 x 1050 x 1060 mm * VARIKLIO GALIA / ĮTAMPAS: 11 kW / 400 V * SVORIS: 170 kg

Būklė: paruoštas naudoti (naudotas), Components per hour: 480,000; field of view (FOV): 61.1 x 44.9 mm²; PCB dimensions: 50–533 x 50–609 mm; PCB thickness: 0.5–4 mm; max. PCB weight: 3 kg; clamping clearance for PCB securing: 3 mm; component clearance below the camera: 34 mm; component clearance below the PCB: 60 mm. Length: 1110 mm, width: 1351 mm, height: 1892 mm, weight: 900 kg. Loader and unloader not included. An on-site inspection is possible. Itjdpfswb E Sbox Ah Ujl

Būklė: naujas, darbinis slėgis: 210 juosta, aukšto slėgio žarnos ilgis: 10 000 mm, tuščias svoris: 160 kg, įėjimo įtampa: 400 V, bendras svoris: 160 kg, garantijos trukmė: 24 mėnesiai, temperatūra: 155 °C, The HDS 10/21-4M eB is one of the most powerful hot water high-pressure cleaners in the mid-range class, impressing with its well-thought-out ergonomics and high user-friendliness. Its slow-running, 4-pole, water-cooled electric motor, robust 3-piston axial pump with ceramic pistons, and the economical eco!efficiency mode ensure outstanding performance and reliable, efficient operation. Additional highlights include optimized burner technology, two detergent tanks, a convenient mobility concept, comprehensive safety systems, intuitive single-switch operation, and smart accessory storage solutions. Technical Data: Condition: NEW Power supply (Ph/V/Hz): 3 / 400 / 50 Water flow rate (l/h): 500 - 1000 Working pressure (bar): 30 - 210 Temperature (with inlet at 12 °C): min. 80 - max. 155 Power rating (kW): 8 Fuel consumption, oil or gas, full load (kg/h): 7.3 Fuel consumption, oil eco!efficiency (kg/h): 5.8 Power cable (m): 5 Fuel tank (l): 25 Weight (incl. accessories) (kg): 160.2 Dimensions (L × W × H) (mm): 1330 x 750 x 1060 Scope of delivery: - Trigger gun: EASY!Force Advanced - High-pressure hose length: 10m, DN8, 400bar - Spray lance: 1050 mm - Power nozzle - Eco! Booster TR 033 nozzle with wide spray pattern Itsdjyg Ic Sjpfx Ah Uel - Servo-press pressure control Equipment: - Detergent function: 20 + 10 l tanks - ANTI!Twist system - Externally refillable tanks for detergent, scale inhibitor, and fuel - Control panel with indicator lights - Pressure shut-off - Pole-reversing plug (3~) - Two detergent tanks - Dry run protection Operational safety: - Easily accessible water filter protects the pump from particles in the water. - Safety valves, water shortage, and fuel monitoring devices ensure equipment reliability. - Soft Dampening System (SDS) compensates for vibrations and pressure surges in the high-pressure system. Accessory storage directly on the unit: - All accessories can be kept directly on the machine. Two holding hooks provided for suction hose and power cable. - Spacious storage compartment, e.g. for detergents, gloves, or tools. Detergent dosing: - Simple switching between detergent tanks 1 and 2. - Accurate detergent dosing with rinse function. Mobility concept: - 'Jogger' design with large, rubber-tired wheels and a castor. - Integrated tipping aid for effortless transport over steps. - Push handles for easy transport and maneuverability. Simple controls: - One switch operates all machine functions.

Būklė: geras (naudotas), Reznor UDSA Gas Warm Air Heater UDSA Gas Warm Air Heater – Top Efficiency Across the Board The most well-known unit from REZNOR is the UDSA gas warm air heater, specifically designed to deliver consistent air distribution in industrial halls. This easy-to-install recirculation unit is available in 14 performance sizes from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. Combustion air can be supplied either from outside (standard) or from the installation room. The REZNOR UDSA warm air heater ensures even air distribution throughout the heated hall. Its patented heat exchanger sets new standards in flow dynamics and heat transfer, resulting in an efficiency of over 92%. UDSA: compact, revolutionary, and trendsetting. This generation of units allows halls to be heated in a highly economical way directly—that is, without a central heating system—using decentralized, modulating gas warm air heaters. REZNOR UDSA Gas Warm Air Heater. Key Advantages: - Efficiency greater than 92% - Suitable for vertical installation as well - Low NOx emissions - Innovative combustion concept - Quiet operation - CE system certification, Types B or C - Compact design for easy installation - Uniform heat distribution - Standard vertical and horizontal air deflection louvres - Heating output modulation down to 50% - EC technology - ErP Ready These units are direct-fired gas warm air heaters (WLE) with fan-supported atmospheric multi-gas burners. Installation and connection of the gas and flue components must be performed exclusively by an authorized installation company. The gas WLE units are suitable for: - Natural gas or LPG operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - 1-stage or 2-stage heating operation* via room thermostat and heat control switch Itodpewb A Hiefx Ah Ujl - Ventilation control using ECOtronic TN-L° with day/night/week program - Roof flue outlets, types B or C - Wall flue outlets, type C Gas WLE Type: UDSA055-4E Gas Appliance Category: B22P-C12-C32-C52-C62 Designation: DE Gas Category: I2ELL Gas Type: G20 Natural Gas Connection Pressure: 20 mbar Nozzle Pressure: 8.40 mbar Max. Rated Heat Input (Hs) QN: 66.04 kW Max. Rated Heat Input (Hi) QN: 59.50 kW Min. Rated Heat Input (Hs) QN: 33.02 kW Min. Rated Heat Input (Hi) QN: 29.75 kW Max. Rated Heat Output: 54.74 kW Min. Rated Heat Output: 26.92 kW Supply Voltage: 230V 1N, 50Hz Air Volume Flow: 5,830 m³/h Protection Class: IP20 Pin No. 0461BN0677 Financing through our bank is also possible. komplett-konzept.leasingo.de For more products—new and used—visit our shop! International shipping costs on request!

Būklė: naudotas, Gamybos metai: 1997, Apdirbimo stalas Itedpfx Ahszdraue Usl

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 1 200 mm, padavimo eiga Y ašimi: 700 mm, padavimo ilgis Z ašis: 500 mm, stalo ilgis: 1 600 mm, stalo plotis: 500 mm, Fully operational, heavy-duty FU series milling machines equipped with infinitely variable feed speed control on all three axes, including rapid traverse mode, and a 3-axis digital display. The FU line features a multi-purpose universal head capable of 360-degree rotation. Electrical components by the renowned Schneider Electric. ISO 50 spindle taper, table size 1600x500 mm. Equipped with a top-class servo-driven axis feed system. Infinitely variable feed speed control on all three axes with rapid traverse capability Universal milling head with patented "HURON" system, adjustable at any angle Tilting control panel with ergonomically arranged switches Heavy, rigid machine construction made of cast iron ensures vibration-free operation All guideways hardened and ground Ball screws on all axes for higher machining accuracy Central lubrication system Automatic table feed for X, Y, Z axes with rapid traverse on all axes Large, robust T-slot table designed for maximum loads 3-axis digital readout for maximum work efficiency Protective covers compliant with the latest CE standards Quiet operation thanks to ground, hardened gears in the oil-bath gearbox State-of-the-art axis feed technology High efficiency maintained even under heavy loads Precision and dynamics match the latest CNC machines Significantly reduced backlash error, ensuring exceptional precision Integral actuator design guarantees theoretically zero static error Thanks to feedback, the servo drive can signal overload and positioning errors; upon receiving such a signal, the controller instantly stops the remaining machine axes. Technical Specifications: Table size – width: 1600 mm Table size – depth: 500 mm Spindle taper: ISO 50 Spindle speed min.: 30 rpm Spindle speed max.: 2050 rpm Number of speed steps / stepless: 27 Longitudinal travel (X): 1200 mm Cross travel (Y): 700 mm Vertical travel (Z): 500 mm Spindle to table distance: 50 – 550 mm Spindle to column distance min.: 28 mm Spindle to column distance max.: 728 mm Max. table load: 1800 kg Automatic feed (X): 10 – 1000 mm/min Automatic feed (Y): 10 – 1000 mm/min Automatic feed (Z): 5 – 500 mm/min Rapid traverse (X, Y, Z): 2200 / 2200 / 1100 mm/min T-slot (number/size/pitch): 5 / 18 / 80 mm Motor power: 7.5 kW Itsdpfsytffqex Ah Uel Dimensions (width): 2200 mm Dimensions (depth): 2285 mm Dimensions (height): 2100 mm Weight approx.: 4500 kg Scope of delivery: LED lighting Coolant system Central lubrication system Table feed for X, Y, Z axes Coolant tray 3-axis digital readout Adjustable guard with latest safety features Operating tools SERVO DRIVE Legally required safety covers Complete Polish DTR documentation CE certificate 24-month warranty for all components at no extra cost

Būklė: naujas, Gamybos metai: 2026, CNC Milling Machine 1212 INDUSTRY 2.0 6kW 1200x1200 with Becker KVT 3.140 Vacuum Pump The INDUSTRY 2.0 series stands out from the standard range through the use of the best and most precise motors and drive gearboxes in its class, which greatly enhance the machining capabilities of the machine, making it the most industrialized series within this price segment. The INDUSTRY 2.0 series CNC router, featuring a working area of 1200 x 1200 mm and a Z-axis clearance of 300 mm, comes equipped with a 6 kW electrospindle reaching 24,000 rpm, built on ceramic bearings. The machine’s worktable is manufactured using hybrid technology – it includes vacuum sections and vacuum sub-sections, enabling automatic, non-invasive clamping of processed material, as well as T-slot grooves for manual clamping. Technical Data: Manufacturer: TechnologieCNC Model: 1212 INDUSTRY 2.0 Electrospindle: 6 kW, 24,000 rpm, with full ceramic bearings Max. traverse speed (rapid): up to 33 m/min Max. machining speed: up to 25 m/min Software resolution: 0.01 mm Mechanical resolution: 0.04 mm Working area X/Y/Z: 1200x1200x300 mm – hybrid table (vacuum + T-slot) Control system: NK-105 G2 controller High working speeds and processing stability are achieved using Leadshine EASY-SERVO drives with encoders and power transmission via a SHIMPO planetary gearbox Software: CAD/CAM standard – Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Weight: approx. 650 kg Dimensions: Transport – 220 / 190 / 220 Assembled and ready for operation – 220 / 225 / 230 Standard Equipment A hybrid table, i.e. a vacuum table that allows non-invasive element mounting and offers the option of manual clamping for irregular shapes The machine frame is fully welded, annealed, and subsequently milled, ensuring precise machining and operational stability Machine operation controlled by the DSP controller NK-105 Tool height sensor included Centralized automatic lubrication system for carriages and linear guides Power transmission via reduction gearbox Machine moves on all axes (X, Y, Z) on high-quality rails and PMI 25-mm linear bearings LEADSHINE Easyservo dual-servo drive on the Y-axis Isdpfjtu H Tuox Ah Uotl Machine wiring composed of high-quality fire-resistant cables Machine construction electrical cabling is flexible and protected against deformation.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, HORIZONTALE SCHLAUCHBEUTELMASCHINE GSP 55 S zu verkaufen! Zustand der Maschine: Wie neu, wurde ausschließlich im Ausstellungsraum zu Demonstrationszwecken genutzt. Die Maschine wird wie folgt geliefert: - Ausleger-Hauptgestell und Verkleidungen aus lackierten Edelstahlblechen (antikorrosiv, RAL 9007), Maschine auf höhenverstellbaren Füßen. - 2.000 mm langer Einlauftransporteur mit produktberührenden Flächen aus Edelstahl (AISI 304) - Schnell auswechselbare Kunststoffschieber – lebensmittelecht. - Längsnahtaggregat, bestehend aus drei Sets Fin-Rädern: Erstes kalt, Ø 100 mm zum Filmtransport; zweites beheizt, Ø 100 mm zur Siegelfilmerzeugung; drittes kalt und konisch, Ø 60 mm, dient als Filmführung; mit Filmkühlung (Luftgebläse). - Erstes Fin-Rad-Set über Touchscreen zu öffnen - Pneumatisches Öffnen der beheizten Räder beim Maschinenstopp - Werkzeuglose, einfache Öffnung der Abdeckplatten über der Fin-Naht - 190 mm oder 270 mm Backenbreite, rotierend mit schrägem Messer und Quer- oder Längssiegelung. - Sicherheitseinrichtung am Querschweißaggregat Motorisierung: - Multi-Achsen-Antriebstechnologie mit: - 1 Stück bürstenloser Motor für den Einlauftransporteur - 1 Stück bürstenloser Motor für Rücksiegelrollen - 1 Stück bürstenloser Motor für das Quersiegelaggregat - 1 Stück DC-bürstenloser Motor für den Auslauftransporteur - Ausleger-Folienabwickler für 520 mm Folienbreite, mit pneumatisch aktivierten Spreizwellen - 1.000 mm angetriebenes Auslaufband - Maschinenstopp in Phase bei geöffneten Querschweißbacken - Schutzverkleidungen aus lackierten Edelstahlblechen (RAL 9007) mit Sicherheitsendschaltern - Elektroschrank - Bedienpanel ausgestattet mit: - Starttaste für Dauerbetrieb - Reset-Taste - Not-Aus-Taste - Positions-Stopp-Taste - Netzpräsenz-LED - 7” Touchscreen mit folgenden Funktionen: - Geschwindigkeitseinstellung - Beutellängeneinstellung - Temperatureinstellung für die Siegelaggregate - Produktpositionierung - Geschwindigkeit der Siegelflächen - (Speicher für bis zu 100 Programme) - Fester oder verstellbarer Formkasten - Ersatzteilset - Maschine in Linksausführung: Produktaufgabe links, Entnahme rechts. (Rechtsausführung auf Anfrage.) - Maschine nach aktuellen CE-Richtlinien gefertigt. Mit folgenden Zusatzausstattungen: - Hauptgestell und Einlauftransporteur in Edelstahlausführung - Getriebeumschaltung für elektronische Maschinen (bis GSP 65 EVO) - Lichtschranke für bedruckte Folie (nur elektronische Maschinen) - Produkthalter am Einlauftransporteur (bis GSP 65 EVO) - Jeder weitere Meter Produktträgerplatten (für GSP 600 EVO, GSP 600 EVO BB und GSP 75 EVO) - 1.000 mm Verlängerung Einlauftransporteur aus Edelstahl - Vorbereitung für Drucker - Kein Produkt – Keine Beutel Lichtschranke - Motorisierte Folienabwicklung mit bürstenlosem Motor - Motorisierte H-Verstellung der Querschweißbacken - Folienvorwärmung - Zwei-Bahnen Schweißbacken - Abnehmbare Schweißbacken - Ausleger-Schweißbacken - Folienabwickler für 720 mm Folienbreite - Doppelt selbsttragender Folienabwickler - Luftstoß-Austrag für leere, doppelte oder gespleißte Packungen Itsdpfx Ahoy Tlc Do Uol - Verstellbare Abwurfposition der Schieber - Faltenvorrichtung (rotierende Ausführung) - Handrad zur Zentrierung des Folienabwicklers - Vorschneideeinheit für Rotationsmaschinen - Mehrkosten für Zwei-Bahnen Schweißbacken – Vorschneideeinheit für Rotationsmaschinen

Būklė: naujas, darbinis slėgis: 210 juosta, aukšto slėgio žarnos ilgis: 20 000 mm, įėjimo įtampa: 400 V, bendras svoris: 160 kg, garantijos trukmė: 24 mėnesiai, temperatūra: 155 °C, The HDS 10/21-4 MXA with automatic hose reel and integrated Ultra Guard high-pressure hose is one of the most powerful hot water high-pressure cleaners in its class. It also impresses with its ergonomic design and user-friendliness. Its slow-running, 4-pole, water-cooled electric motor, robust 3-piston axial pump with ceramic pistons, and energy-saving eco!efficiency mode deliver top performance as well as reliable, economical operation. Additional highlights include optimized burner technology, dual detergent tanks, a convenient mobility concept, comprehensive safety features, user-friendly single-switch operation, and smart storage solutions for accessories. Technical Data: Condition: NEW Power supply (Ph/V/Hz): 3 / 400 / 50 Flow rate (l/h): 500 – 1000 Working pressure (bar): 30 – 210 Iodpfx Ahov Tbbdj Uotl Temperature (with inlet at 12°C): min. 80 – max. 155 Connection power (kW): 8 Fuel oil/gas consumption at full load (kg/h): 7.3 Fuel oil consumption eco!efficiency (kg/h): 5.8 Power cable (m): 5 Fuel tank (l): 25 Weight (with accessories) (kg): 160.2 Dimensions (L × W × H) (mm): 1330 x 750 x 1060 Scope of Delivery: Spray gun: EASY!Force Advanced High-pressure hose length: 20 m, DN8, 315 bar Spray lance: 1050 mm Power nozzle Equipment: Integrated automatic hose reel Detergent function: 20 + 10 l tanks ANTI!Twist Externally refillable tanks for detergents, scale protection, and fuel Control panel with indicator lights Pressure shut-off Phase inverter (3~) 2 detergent tanks Dry-running protection Automatic Hose Reel: - Scratch-resistant and smooth Ultra Guard HD hose with Teflon® coating. - Automatic hose reel for convenient and safe storage of the 20-metre high-pressure hose. Operational Safety: - Easily accessible water filter protects the pump from particulate contamination. - Safety valves, water shortage, and fuel monitoring ensure device availability. - The Soft Damping System (SDS) compensates for vibrations and pressure spikes in the high-pressure system. Onboard Accessory Storage: - All accessories can be stored directly on the unit. Separate hooks for suction hose and power cable. - Spacious storage compartment, e.g., for detergents, gloves, or tools Detergent Dosing: - Simple switching between detergent tank 1 and 2. - Precise detergent dosing with rinse function. Mobility Concept: - Jogger principle with large, rubber tyres and swivel castor. - Integrated tilt aid for easy transport over steps. - Push handles for easy transport and manoeuvrability. Simple Controls: - Single switch for all functions.

Būklė: naudotas, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This device excels in precision, reliability, and versatility for industrial metrology applications. Features & Equipment: - CNC-controlled 3D coordinate measuring machine - Multi-sensor capable (both optical and tactile measurements possible) - Equipped with a moving bridge system (MB/Z) for enhanced stability and flexibility - High-precision measurements for complex workpieces - Robust construction, designed for continuous industrial use - Suitable for quality assurance, production monitoring, and R&D environments Itedpfxjzii Dzj Ah Uol Additional Equipment – Renishaw TP200 probe system: The high-precision, tactile Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It allows fast stylus changes and precise measurements even with long styli. Key Features: - Strain gauge technology (SG): Minimal deflections are detected with high accuracy – typical errors such as “lobing” are eliminated. - High precision: Repeatability up to 0.4 µm, 2D probing uncertainty ±0.8 µm. - Fast change: Automatic stylus change with SCR200 change rack, no recalibration required. - Durable: Stylus module lifetime over 10 million probe touches. - Flexibility: Standard force (SF) and low force (LF) modules for delicate materials. - Compatibility: Usable with Renishaw PH10 probe heads and extensions up to 300 mm. Technical Specifications (excerpt): - Connection: M8 connector, Interface PI200 - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Styli: M2 Technical Data: - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Power supply: 115–230 V AC - Current consumption: max. 10 A Scope of delivery: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probe system incl. probe modules - Accessories as per attached images Important note: "The table shown in the photos is not included in the sale." (Changes and errors in technical data and details reserved!) Further questions can be answered by phone at any time.

Gamybos metai: 2023, būklė: naudotas, VIOLI VM/TRI25-3s Drawing Bench Year of manufacture: 2023 The VIOLI VM/TRI25-3s drawing bench is a robust and innovative machine designed for precise and efficient metal drawing operations. Featuring a useful length of 3 meters and a powerful traction capacity of 2,500 kg, its patented hydraulic system ensures linear pulling, a compact design, and consistent quality. TECHNICAL SPECIFICATIONS Useful length: 3 meters Traction force: 2,500 kg Operating hydraulic pressure: 180 bar Drawing speed: Min. 0 m/min – Max. 17 m/min Drawing reduction: Approximately 15% of section POINTER clamping force: 100 tons Tolerance: 1 mm Power supply: 400 V – 50 Hz Electric power: 9.2 kW Hydraulic oil: ISO 46 Motor power: 9.2 kW – 380 V, 50 Hz Noise: At work station LP < 70 dB(A) Hydraulic system: Proportional hydraulic pump Carriage movement: With ball circulation guides Mobile construction and installation of a carrier for accommodating 1 or more pull rods in line with the carriage Provision for cooling the lubricant oil with the insertion of a stainless steel tube coil in the tank Adjustable die holder Bar support system Lubrication tank with pump Manual opening/closing of the clamp, actuated by pneumatic piston Compliance: The machine is built in accordance with EU conformity regulations. DETAILED FEATURES Operating system: The system uses a hydraulic piston and patented technology to optimize space, guaranteeing lineal stroke. With the drawing hole, it minimizes flexing of the support structure. It allows for a compact die length and a double usable pulling stroke. Clamp return: A patented double-circuit chain technology returns the clamp to its starting point. This allows... The hydraulic piston length to be half of the useful stroke. Traction force: The traction force is in line with the drawing die. Speed control: Manually adjustable speed from 0 to 16 meters per minute (0–16 m/min). Offers precise speed regulation and constant speed due to hydraulics. Tolerance: Tolerance is 1 mm. Hydraulic system: Equipped with a proportional hydraulic pump. Motor power: 9.2 kW – 380 V, 50 Hz. Carriage: Sliding carriage with ball circulation guides. Die holder: Mobile construction and installation for accommodating 10 dies in line with the carriage. Isdpfjyl U Sqex Ah Uotl Lubrication: Features a lubrication tank with pump and integrated cooling system. Lubricant oil cooled by a stainless steel tube coil inside the tank. Adjustable die holder. Bar support: Comes with a bar support system. Clamp operation: Manual opening and closing of the clamps via pneumatic piston. Control panel: The machine is fitted with a control panel. FUNCTION The VM/TRI253S hydraulic drawing bench is a machine used for cold reduction of the cross-section of metal rods, either with round or shaped profile, as well as hollow or “live” metal tubes. The section reduction is achieved by passing the product through a calibrated drawing die and pulling it using a mechanical clamp with the required force to achieve the section reduction. C...

Būklė: naujas, Gamybos metai: 2026, FAN 7.5 – transportinis ventiliatorius – didelio našumo pūstuvas medžio drožlėms, CORMAK CORMAK markės transportinis ventiliatorius FAN 7.5 yra pramoninis, didelio slėgio įrenginys, skirtas efektyviai pašalinti medžio drožles, dulkes ir technologines atliekas įmonėse, kuriose reikalingos patikimos dulkų šalinimo sistemos. Dėl 7,5 kW galios variklio ir didelio našumo – iki 10 562 m³/h, šis ventiliatorius puikiai tinka medžio drožlių šalinimui pramoninėse, stalių ir žemės ūkio įmonėse. Pagrindiniai privalumai: Našumas iki 10 562 m³/h – užtikrina aptarnavimą keliose darbo vietose Radialinis rotorius, generuojantis iki 2554 Pa slėgį 7,5 kW variklis – didelė galia ir patikimas veikimas Universalumas – medžio drožlėms, pjuvenoms, dulkėms ir birioms medžiagoms Patvari konstrukcija – atspari pramoninėms sąlygoms Konstrukcija ir technologija Radialinis ventiliatorius FAN 7.5 pagrįstas tvirta, plienine konstrukcija, atsparia mechaninėms apkrovoms ir korozijai. Rotorius, pagamintas iš subalansuotų komponentų, užtikrina stabilų veikimą, net ir ilgalaikio naudojimo metu. Konstrukcija pritaikyta stacionariam montavimui, todėl galima individualiai ją konfigūruoti, atsižvelgiant į įmonės poreikius. Tikslumas ir našumas Medžio drožlių šalinimo įrenginys FAN 7.5 garantuoja efektyvų ir saugų oro taršos šalinimą be užsikimšimo rizikos dulkų šalinimo kanaluose. Didelis slėgis leidžia efektyviai sugerti net sunkesnes atliekų frakcijas, todėl tai yra universalus pūstuvas medžio drožlėms, skirtas reiklesnėms gamybos įmonėms. Pritaikymas FAN 7.5 – tai medžio drožlių ventiliatorius, skirtas pramonės šakoms, kuriose svarbiausia yra palaikyti švarų orą ir užtikrinti beproblemį dulkų šalinimo sistemų veikimą: Stalių ir baldų gamybos įmonės – kaip dulkų šalinimo įrenginio dalis CNC staklėms, pjūklams, frezavimo staklėms Žemės ūkis – ventiliacijai ir pašarų, grūdų ir medžio drožlių dulkių šalinimui Metalų ir chemijos pramonė – birių medžiagų filtravimui ir dulkėtų technologinių linijų valymui Standartinė komplektacija 7,5 kW / 400 V variklis Radialinis plieninis rotorius Įleidimo anga 340 mm, išleidimo anga 350 mm Plieninė korpusas, pritaikyta stacionariam montavimui Papildoma komplektacija Lanksčios dulkų šalinimo žarnos ir greitai jungiami elementai Cikloniniai separatoriai Itsdpfx Ajvugrdsh Ujl Galutiniai filtravimo įrenginiai Automatinio įsijungimo moduliai su staklėmis Techniniai duomenys Maks. oro našumas 10 562 m³/h Įleidimo angos skersmuo 340 mm Išleidimo angos skersmuo 350 mm Slėgis 2554 – 1673 Pa Matmenys (PxPxA) 810 × 900 × 980 mm Variklio galia / įtampa 7,5 kW / 400 V Svoris 125 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, veikimo valandos: 25 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 500 kN, varžto skersmuo: 95 mm, darbinio tūrio: 3 367 cm³, Clamping force: 8,500 kN Maximum mold opening force: 560 kN Moving platen opening force: 153 kN Moving platen closing force: 117 kN Clamping platen (H x V): 1,600 x 1,600 mm Clear width (H x V): 1,140 x 1,140 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Opening distance: 2,100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200 / 100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 cc Shot weight (PS): 3,064 g Injection flow rate: 690 cc/s Iedpfxeyb Sx He Ah Ustl Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated power of pump motor: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil capacity: 1,500 l Dimensions and weights: Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 43,000 kg Max. mold weight: 12,200 kg Accessories: - Vibration dampers Additional equipment: - 1 x air valve - 4 x hydraulic core pulls - 12 x hydraulic cascades - 2 x 12-circuit water manifold - Robot interface to Euromap 67

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 656377.1, bendras svoris: 170 kg, Nominal diameter: 8 mm Die depth: 1 mm Dimension X: 0.90 mm Isdpju Tuqtofx Ah Uetl Dimension X min.: 0.8 mm Dimension X max.: 0.95 mm Max. pressing force: 55 kN Deflection constant: 27.63 kN/mm Zero position: 95.8 mm The clinching pliers from Tox Pressotechnik with servo drive are specifically developed for use in robotic systems and provide a precise and efficient solution for joining sheet metal and materials. With its state-of-the-art servo drive technology, it enables highly dynamic and controlled operations, making it ideal for integration into automated processes. The pliers are distinguished by their robust construction and reliability, making them a durable and low-maintenance solution. Thanks to their flexibility and versatility, they are perfectly suited for a variety of industrial applications, helping to increase productivity and quality in manufacturing.

Būklė: geras (naudotas), rida: 316 507 km, galia: 81 kW (110,13 AG), pirmoji registracija: 04/2018, padangos dydis: 205/55R16, ašių konfigūracija: 4x2, ratų bazė: 3 010 mm, spalva: balta, vairuotojo kabina: dieninė kabina, pavaros tipas: mechaninis, pavarų skaičius: 6, emisijos klasė: Euro 6, pakaba: kitas, sėdimų vietų skaičius: 5, bendras ilgis: 4 880 mm, bendras plotis: 1 790 mm, bendras aukštis: 1 830 mm, krovimo vietos ilgis: 1 340 mm, krovinių skyriaus plotis: 1 110 mm, krovos erdvės aukštis: 1 230 mm, Gamybos metai: 2018, Įranga: ABS, Bluetooth, centrinis užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, kruizo kontrolė, oro kondicionavimas, trauki kontrolė,