Bioquell L-4 Opti pirkti naudotą (95 495)

Būklė: beveik kaip naujas (parodų įrenginys), Included in delivery: 01x Waste container, 2nd choice Manufacturer: SSI Schäfer Cedpfx Akek Nl Hujkorf Volume: 770 l Depth with lid closed = 770 mm Depth with lid open = 840 mm Height with lid closed: 1,360 mm Total width: 1,380 mm Material color: black Wheels: 4 (2 with brakes) Material: Polyethylene (PE) Net weight: 68 kg Note: Usable width and depth taper conically towards the bottom. General information about the item: This item is offered for collection only. If transport or shipping is required, this will incur additional costs, which can be requested from us depending on delivery location and scope.

Būklė: labai geros būklės (naudotas), rida: 696 727 km, galia: 360 kW (489,46 AG), pirmoji registracija: 07/2018, kuro tipas: dyzelinas, padangos dydis: 315/70 R22.5, ašių konfigūracija: 4x2, ratų bazė: 3 800 mm, kuras: dyzelinas, spalva: kitas, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: plienas-oras, leistina ašies apkrova (ašis 1): 8 000 kg, leistina ašies apkrova (ašis 2): 13 000 kg, Gamybos metai: 2018, Įranga: ABS, antras kuro bakas, autonominis šildytuvas, centrinis užraktas, elektrinis langų reguliavimas, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priešrūkiniai žibintai, šaldytuvas,

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, Mobile air filtration and extraction unit Box with built-in fan and filter cartridge. Equipped with HEPA filter. Suitable for ventilation, filtration, and extraction of indoor air. Extraction performance: approx. 1,800 m³/h Exhaust fan: IMOFA DS 11-4, 460 Watts, 50 Hz, 4.8 Amps Voltage: 230 V, 50 Hz Systemair RTRE 5 transformer controller 4 filter cartridges 1 x ULTIMA RP HEPA filter, 3,000 m³/h Aluminium frame housing, mobile with lockable castors Dimensions: 100 x 100 x 80 cm Weight: approx. 120 kg Crsdpfsvvcqxox Akkof

Būklė: naudotas, Gamybos metai: 2020, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 230 V, kuras: buitinis dujos H, įėjimo dažnis: 50 Hz, Zenith 46 kW dark radiant heater, 12–15 meter black tube heater ZENIT-46/L dark radiator, 15 m long, in like-new condition for sale. Complete unit with heat-reflective hood, spacers, hangers, and, if necessary, chimney. Make: PAKOLE Zenit 46/L Year of manufacture: 2020 Csdpfjudldfjx Akksrf Heating capacity: 46 kW Tube length: 12-15 meters Gas connection pressure: 360 mbar Rated voltage: Max. current consumption: IP21 AC 230 V 50 Hz

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: EAN0729389556525, keliamoji galia vienai sandėliavimo sekcijai: 3 000 kg, bendras ilgis: 34 000 mm, bendras aukštis: 4 500 mm, lentynos aukštis: 4 500 mm, lentynų eilučių skaičius: 4, padėklų vietos: 108 euro padėklai, rėmo aukštis: 4 500 mm, rėmo plotis: 1 100 mm, apkrova vienai santvarų porai (maks.): 3 000 kg, lentyna ilgis: 8 500 mm, atrama ilgis: 2 700 mm, 4 eilių padėklų stelažai (4 x M45112711-2) Kiekvienas po 8,5 m ilgio, 4,5 m aukščio, 1,1 m gylio, Kiekviename – 3 sekcijos, plotis – 2,7 m, Kiekviename – po 2 skersinių lygių, kiekvienos lentynos apkrova – 3000 kg. - 16 rėmų (RM4511 - RAL5019) - 32 pado plokštės, paklotai, tvirtinimo detalės - 64 grindų inkarai (ZZBA1210) - 48 viengubi skersiniai (T27114 - RAL2008) - 4 keliamoji talpa ženklas (BSMcP) Rėmai varžtais, nesiurinkti iš anksto Pervežimas / pristatymas: - Ne vėliau kaip per 20 darbo dienų po apmokėjimo - Pristatymas į statybos vietą / montavimo vietą - Iškrovimą iš sunkvežimio atlieka pirkėjas su nuosavu keltuvu. - Pristatymas visoje Vokietijoje (išskyrus salas). Pristatymas į ES valstybes — pagal atskirą susitarimą. Credpfezf Dgvsx Akkjf

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, keliamoji galia: 4 000 kg, stalo apkrova: 4 000 kg, priekinės plokštės skersmuo: 1 000 mm, 3-axis turning and tilting positioner with 4 ton load capacity Clamping plate diameter: 1000 mm Extension arm / radius: 2000 mm (lower price at 1500 mm) Height adjustment: min. 1250 mm - max. 2000 mm Rotary table speed: 0.05 - 0.5 rpm Hydraulic lifting speed: 1000 mm/min Rotation range: 360° Tilt range: ±360° Handheld remote control (foot control available on request) Special equipment/options available Codswwinrepfx Akksrf

Būklė: naujas, Gamybos metai: 2026, Preciziška vedimo ir traukos veleno tekinimo staklės Gamintojas: OPTIMUM Modelis: OPTiturn TZ 4 Art. Nr.: 3432240 Būklė: Nauja staklė Atstumas nuo centro iki pagrindo: 200 mm Atstumas tarp centrų: 800 mm Sukimosi greitis: 45 - 1 800 aps./min (16 pakopų) Standartinė komplektacija: - 3 ašių skaitmeninis indikatorius DPA 32 - Fiksuotas centras MK 3 - Greitakeičiamas pjovimo laikiklis B dydžio - Tekinimo laikiklis BD - Redukcinė įvorė MK 6 / MK 3 - Stacionari atrama ø 10 - 130 mm - Judačioji atrama ø 10 - 100 mm - Aušinimo skysčio įranga - Ištraukiama drožlių dėžė - LED mašinos lempa Cjdpegqw U Rofx Akksrf - Eksploataciniai įrankiai

Būklė: naujas, Tikslioji kreipiamoji ir traukiamoji veleno tekinimo staklės Gamintojas: OPTIMUM Modelis: OPTiturn TZ 4V Artikulo Nr.: 3432245 Būklė: Nauja mašina Crodpfx Aeg Hkmrokkof Centro aukštis: 200 mm Centro atstumas: 800 mm Sukimosi greitis: 50 - 3000 aps./min. be pakopų reguliavimas per 2 pavarų lygius su SIEMENS inverteriniu variaciniu pavaros varikliu Standartinė komplektacija: - 3 ašių skaitmeninis indikatorius DPA 32 - skaitmeninis sukimosi greičio indikatorius veleno galvoje - fiksuotas centrinis smaigalys MK 3 - greitojo keitimo peilių laikiklis Gr. B - tekinimo peilių laikiklis BD - redukcinė įvorė MK 6 / MK 3 - stacionari lėkštė, ø 10 - 130 mm - sekiojanti lėkštė, ø 10 - 100 mm - aušinimo skysčio sistema - ištraukiamas drožlių padėklas - LED staklių šviestuvas - darbo įrankiai

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, Siūlome renovuotas turbinas iš tęstinės abrazyvinio srauto mašinos – Rösler RRB 22/5-L. Turbinų tipas – Hurricane H42. Turbinos atnaujintos naudojant originalias įrankinio plieno atsargines dalis. Smėliavimo įrenginys, abrazyvinio valymo įranga, smėliasrovė, smėliavimas, abrazyvinė turbina. Crodpfxjyy Rybe Akkof

Būklė: labai geros būklės (naudotas), Gamybos metai: 1994, Four-sided planer, 8-head HARBS. Cedpfx Aksl Dw Nxjkerf Long infeed table: 3 meters. Machine weight: 5,500 kg. Cardan drive. Head configuration: bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal, top horizontal. Motors: 5.5 kW and 7.5 kW. Planing width: 230 mm. Planing height: 160 mm.

Būklė: naujas, rida: 500 km, galia: 382 kW (519,37 AG), kuro tipas: dyzelinas, bendras svoris: 18 000 kg, ašių konfigūracija: 2 ašys, stabdžiai: retarderis, spalva: balta, pavaros tipas: automatinis, Gamybos metai: 2025, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), navigacijos sistema, oro kondicionavimas, suodžių filtras,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, Allgemeine Beschreibung Zum Verkauf stehen 6 Stück Hydraulikpressen, Modell YL32-200, robuste Vier-Säulen-Bauweise, ideal für Metallumformung, Pressarbeiten, Stanzen, Biegen und allgemeine Industrieanwendungen. Die Maschinen wurden ursprünglich aus China importiert und basieren auf dem weit verbreiteten Y32-Serienstandard, was eine einfache Wartung und weltweite Verfügbarkeit von Ersatzteilen gewährleistet. ⸻ ⚙️ Technische Daten (typisch für YL32-200) * Presskraft: ca. 200 Tonnen * Bauart: 4-Säulen-Hydraulikpresse * Hub: ca. 400 – 700 mm * Tischgröße: ca. 700 x 700 mm – 1000 x 1000 mm * Lichtöffnung (Öffnungshöhe): ca. 800 – 1200 mm * Hydraulikdruck: bis zu 25 MPa * Motorleistung: ca. 7,5 – 15 kW * Steuerung: manuell / halbautomatisch * Stromversorgung: 380V / 50Hz (industriestandard) * Gewicht je Maschine: ca. 5 – 8 Tonnen ⸻ 🏭 Anwendungsgebiete * Metallumformung & Stanzen * Tiefziehen * Richten und Pressen * Kunststoffverarbeitung * Werkstatt- und Serienfertigung ⸻ 📦 Zustand * Gebrauchtzustand * Verkauf wie gesehen / ab Standort * Besichtigung nach Vereinbarung möglich ⸻ 📊 Verfügbarkeit * Menge: 6 Maschinen verfügbar * Einzelverkauf oder als Paket möglich ⸻ 🚛 Logistik * Standort: Deutschland * Verladung möglich (je nach Aufstellung Stapler/Kran erforderlich) * Internationaler Versand kann organisiert werden Preis pro Stück!!!! Crjdpfey E Abnjx Akkjf Demontage durch Käufer!!! Oder gegen Aufpreis organisiert!!!

Būklė: naudotas, rida: 734 779 km, galia: 375 kW (509,86 AG), pirmoji registracija: 06/2014, kuro tipas: dyzelinas, sėdimų vietų skaičius: 56, pavaros tipas: automatinis, emisijos klasė: Euro 6, spalva: kitas, stabdžiai: retarderis, Gamybos metai: 2014, Įranga: ABS, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priekabos jungtis, virtuvė transporto priemonėje,

Būklė: naudotas, rida: 691 886 km, galia: 302 kW (410,61 AG), pirmoji registracija: 12/2014, kuro tipas: dyzelinas, tuščias svoris: 11 780 kg, didžiausias leistinas svoris: 14 220 kg, bendras svoris: 26 000 kg, ašių konfigūracija: 6x2, stabdžiai: retarderis, spalva: raudona, vairuotojo kabina: kitas, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: oras, sėdimų vietų skaičius: 2, krovinio erdvės tūris: 42 m³, krovimo vietos ilgis: 7 370 mm, krovinių skyriaus plotis: 2 470 mm, krovos erdvės aukštis: 2 320 mm, lovų skaičius: 1, Įranga: ABS, autonominis šildytuvas, aušinimo blokas, borto kompiuteris, diferencialo užraktas, elektroninė stabilumo programa (ESP), galinis keltuvas, kabina, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priekabos jungtis, suodžių filtras, trauki kontrolė,

Būklė: naudotas, rida: 523 583 km, galia: 340 kW (462,27 AG), pirmoji registracija: 01/2018, kuro tipas: dyzelinas, sėdimų vietų skaičius: 61, pavaros tipas: automatinis, emisijos klasė: Euro 6, spalva: kitas, stabdžiai: retarderis, Gamybos metai: 2018, Įranga: ABS, kruizo kontrolė, oro kondicionavimas, pritaikyta neįgaliesiems,

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2015, Matmenų matavimo X/Y/Z: 400mm/300mm/200mm, matavimo tikslumas: 2,9+L/100µm, didžiausias ruošinio svoris: apie 30 kg, staklių matmenys X/Y/Z: apie 1250mm/950mm/1700mm, svoris: apie 900 kg. Dokumentacija yra. Galima apžiūra vietoje. Cjdpfxsy R Dr Es Akksrf

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: NR: 220.10.029.19, Funkcionalumas: visiškai funkcionalus, galia: 15 kW (20,39 AG), įėjimo įtampa: 400 V, įėjimo srovė: 28 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, ruošinio aukštis (maks.): 60 mm, Įranga: CE žymėjimas, dokumentacija / vadovas, Aukštos kokybės Format4 Tempora 60.06 EL briaunų klijavimo staklės parduodamos – paruoštos darbui! Pakelkite savo gamybą į aukštesnį lygį su šiek tiek naudotomis Format4 Tempora 60.06 EL briaunų klijavimo staklėmis, kurios yra puikios būklės. Sukurtos pramoniniam darbui, šios staklės užtikrina didžiausią tikslumą ir nepriekaištingus paviršius kiekvienai plokštei. Aukšto tikslumo automatinis briaunų klijavimas Priešfrezuojantis agregatas tobulam briaunos paruošimui Patikima, stabili klijavimo sistema Pilnas apdirbimas: apipjovimas, frezavimas, poliravimas Paprastas valdymas ir patikimas našumas Papildoma komplektacija: Csdpfey Dg N Tsx Akkerf Raudonas oro bakas (kaip matyti nuotraukose) Papildomas pašildomas klijų katilas – idealus greitam skirtingų spalvų klijų keitimui Rūpestingai prižiūrėtos, mažai naudotos ir visiškai veikiantys įrenginiai – paruoštos nedelsiant naudoti gamyboje. Staklės parduodamos dėl gamyklos pertvarkymo. Susisiekite dėl daugiau informacijos ar apžiūros.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level. Csdpfx Ajfdkb Tskkorf

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Codpfxjd Tbbdo Akkorf Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) Cedpfx Akod Tqalokjrf - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg Credpfx Akofdkb Uokef - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. Cedpeguk A Hefx Akkerf We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Csdpeguk Dkofx Akkorf Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth Crsdpofdkbhefx Akksf - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) Cjdeguk Dvjpfx Akkjrf - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.