Scm S520 pirkti naudotą (733)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic adjustment of the scoring unit Automatic parallel fence with adjustment via leadscrew and linear ball bearing guide Hsdpfx Agsyftzkj Eenp Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system with magnetic strip and LCD display. Cross-cut fence with 3 LCD displays Extendable support table with roller support Technical data: Cutting length mm 3200 Main saw blade diameter mm 450 Scoring blade diameter mm 120 Panel cuts with extendable fence mm 3200x3200 Tilting range degrees 0°/ +46° Max. saw blade cutting height at 90° mm 150 mm Max. saw blade cutting height at +45° mm 130 Saw blade speed rpm 2500, 3500, 5000 Scoring blade speed rpm 9000 Extraction port diameter mm 120 & 100 Main motor power Hz 50 kW 7.5 Scoring unit power Hz 50 kW 0.75 Cutting width with parallel fence mm 1270 Weight approx. 1180 kg Note on used machines: • Errors in technical specifications and prior sale reserved. • The listed prices are ex works, loaded free of charge. • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no warranty whatsoever. Buyers are free to inspect the machines at the location. • Special agreements are only possible in written form. (We will only respond to inquiries providing your address and telephone number!)

Būklė: naujas, Equipment: - 5-axis electronic control - Swiveling control panel over the table - Electronic adjustment of the scoring unit - Automatic parallel fence adjustment with spindle and linear ball bearing guide - Start/stop switch integrated into the outrigger table - “Quick Lock” crosscut frame, longitudinal fence with LCD displays “Full Support” - Sliding table with curved contact surfaces - 10-year warranty! - Telescopic arm with linear guide and ball bearing guidance Technical specifications: - Main saw blade diameter: 550 mm - Scoring blade diameter: 120 mm - Panel cutting length with extendable stop: 3200 x 3200 mm - Tilting range: 0 to +46° - Max. cutting height at 90°: 200 mm - Max. cutting height at +45°: 130 mm - Saw blade speed: 2500, 3500, 5000 rpm - Scoring blade speed: 8500 rpm - Extraction port diameter: 120 & 100 mm - Main motor power (50 Hz): 7.0 kW - Scoring unit motor power (50 Hz): 1.3 kW - Cutting width with parallel fence: 1500 mm Including the following OPTIONS: Hnsdpscrnm Nefx Ag Eop 570335 “Pro-Lock” system for fast clamping of the main saw blade with quick-release riving knife adjustment (no tools required)

Būklė: naujas, Saw unit swivels 46° to both sides. Programmable, electric saw blade adjustment. Control unit with electronic display for saw blade tilt and lift. Cast iron saw unit ensures torsional rigidity and vibration-free operation. Facilitated panel feed thanks to large squaring frame with roller. Telescopic fence with 2 professional flip stops. Outstanding cutting precision – the sliding table is guided precisely and smoothly using a long-proven ball contact system. Scoring unit is equipped with its own drive and is easily adjustable from the outside. Saw unit accommodates blade diameters up to 400 mm. Scoring saw blade diameter: 160 mm. 2-position manually adjustable saw blade guard. 3-axis control system. Motorized rip fence with electronic positioning. Includes: - Position display via encoder - Adjustment via ball screw - Stepless adjustment via switch or automatic positioning system - Incremental adjustment possible - Fence swiveling mechanism under the table - Cutting width: 1270 mm - Programmed movement of motorized adjustment and tilting for the saw unit Hedpjd Akygofx Ag Ejnp UP version: - With swiveling control panel for maximum flexibility X version: - With Compex miter fence for quick and precise execution of miter cuts, with automatic stop position compensation (length compensation) - Extension arm with angle-adjustable telescopic crosscut fence - Optional degree scale division (Part No.: 5510403) - Rip fence with 2 LCD displays for fence position Includes options: - Version with max. sliding carriage travel 3200 mm - Integrated on/off switches for main saw blade and scoring unit motors in squaring carriage - Squaring frame with CompeX device - Version "READY 3 UP" - 2 cutting speeds (3500/5000 rpm) Extraction port diameter: 120 & 80 mm Main motor: 7.0 kW, 400 V, 50 Hz Squaring frame length: 1200 mm Squaring frame width: 650 mm Sliding table length: 3200 mm Sliding table width: 360 mm Cutting width with rip fence: 1270 mm Max. crosscut width left of saw blade: 3260 mm Saw blade tilt: -46° to +46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Max. cutting height at -45°: 60 mm (Main) saw blade diameter: 400 mm Scoring saw blade diameter: 160 mm

Būklė: naujas, Tilting Spindle Moulder Simple and practical machining operations thanks to the ergonomic arrangement of controls on the front of the machine Digital display for height and tilt position of the spindle Spindle speed display Spindle rotation reversible (clockwise/anticlockwise) 8 speeds Spindle diameter: 30 mm Spindle clamping length: 125 mm Max. tool diameter under table: 240 x 80 mm Extraction port diameter: 2 x 120 mm Hnodpscuwptefx Ag Ejp INCLUDES OPTIONS: 57.02.63 "LL" version for profiling work with 2 table extensions 57.03.30 Motorised height and angle adjustment of the working unit with digital displays 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switch 57.00.76 Fence with handwheel adjustment - Fence with stepless adjustment via handwheels easily accessible from the front: – Adjustment of the entire fence relative to the tool – Adjustment of the front ruler to change chip removal – Mechanical digital displays – Wooden fence jaws and connector bars Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Errors in technical details and prior sale reserved. • Stated prices are ex-location – free loading! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only answer enquiries that include your address and telephone number!)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Saw blade diameter max.: 300 mm Main saw motor: 5.5 kW Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Clamping tongs: 8 pcs. Saw carriage height adjustment on THK linear guides Pressure beam with slots (through-feed) Side aligner Pneumatic quick-change saw blade system Extraction port diameter: 1 x 120 mm & 1 x 150 mm Machine dimensions (L x W): 5,700 x 6,000 mm Weight: approx. 2,500 kg INVERTER NEW Notice for used machinery: • Technical specifications and prior sale subject to change. • All prices are ex-works, loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect machines at our site. • Special agreements are only valid in written form. Hodpfx Ajhvan Ijg Ejnp (We will only respond to inquiries with your address and telephone number!)

Būklė: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Platusis juostinis šlifuoklis SCM Sandya 10 SCM 1100 R+R+RT Specifikacija: • Būklė – naudotas, po kompleksinės apžiūros • Gamintojas – SCM • Modelis – Sandya 10 • Darbinis plotis – 1100 mm • Maksimalus darbinis aukštis – 160 mm • 4 šlifavimo agregatai iš eilės: - kalibruojantis plieninis velenas – 160 mm skersmens - kietos gumos velenas – 160 mm skersmens - kombinuotas agregatas (guminis velenas + sekcijinė batelio tipo šlifavimo galvutė su papildomos prispaudimo funkcija) - dulkių nuėmimo šepetys • Pagrindiniai varikliai – 18,5 ir 12/15 kW galingumo • 2 darbiniai greičiai (antrajame variklyje) • Transporterio greitis reguliuojamas tolygiai • Elektroninis šlifuojamo elemento storio indikatorius • Optinis svyravimas • 2-ojo ir 3-iojo agregatų nupūtimo funkcija • Galimybė kiekvieną agregatą nuleisti/pakelti atskirai • Šlifuojamo elemento storio matuoklis • Stalas paruoštas vakuumo siurbliui (siurblys į komplektą neįeina) • Šlifavimo juostos matmenys – 2150 x 1115 mm • Dulkių ištraukimo jungtys: 4 x 155 mm ir 4 x 120 mm • Svoris apie 1800 kg • Gamybos metai – 1995 • Bendrieji matmenys 215 x 170 x 210 cm (ilgis x plotis x aukštis) Hjdpfx Agozcy I Ee Esnp Papildoma informacija: • Mašina yra geros techninės būklės, paruošta tiesioginiam naudojimui • Nuotraukose pavaizduota faktinė parduodamo daikto būklė • Galima įjungti ir patikrinti įrenginį vietoje • Nemokamas mokymas dirbti su mašina (įmonės būstinėje) • Aukcione nurodyta kaina nurodyta be PVM ir transporto išlaidų Finansavimas ir transportas: • Organizuojame transportavimą su MDD autoparku, kurjerių įmonėmis ar išoriniais vežėjais • Teikiame finansavimo galimybes – lizingas arba lizingo paskola

Būklė: naudotas, Gamybos metai: 2011, AXES Working area X-Y-Z axes * mm: 3050-1300-180 Workpiece length in pendulum operation mm: 1390 Stroke X-Y-Z axes mm: 3460-1735-250 Max. traverse speed of X-Y axes m/min: 60 WORK TABLE Number of workpiece supports and vacuum cups: 6 / 2 standard type Standard end stops / Position: 1 / rear Vacuum pump m³/h: 90/108 DRILLING UNIT Vertical spindles Std/Quantity/Speed rpm: 12 (8X-5Y) / 4000 Horizontal spindles Std/Quantity/Speed rpm: 6 (4X-2Y) / 4000 Integrated groove/sawing unit in X Ømm/rpm: 120 / 6000 Motor power kW (hp): 2.2 (3) ELECTROSPINDLE Motor power Std./Opt. (S6) kW (hp): 7.5 (10) / 11 (15) Max. speed rpm: 24,000 Traveling tool changer on the aggregate holder in X: 4 positions, pneumatic INSTALLATION Installed power KVA: 23÷28.5 Compressed air requirement Nl/min: 450 Extraction air requirement m³/h: 1900+1900 (3400) Required extraction air speed m/sec: 30 Extraction connection diameter mm: 150+150 (200) Machine weight kg: 3000 * X: Distance between stops – Y: Cutter center as reference point; Z: Workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center in C-frame design and worktable with adjustable workpiece supports and vacuum cups, designed for: - Vertical drilling on the panel surface - Horizontal drilling on all four panel sides - Grooving with disc cutter in the X direction - General milling operations Self-supporting structure and worktable Structure made of welded steel construction with control cabinet integrated in the machine frame. Available in two different lengths and with standard workpiece supports or TV-compatible aggregate holder. Box construction made of cold-rolled steel with internal reinforcement ribs, protective devices, consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit, and an SCM electrospindle with HSK 63 F quick-change tool system. Travel paths of the portal and the aggregate carrier Movement in X, Y, and Z axes is achieved on linear prismatic ball-bearing guides using preloaded drives. X-axis drive (moving column) via a preloaded, backlash-free helical rack and pinion system. Movement of the aggregate carrier in Y and Z directions via preloaded systems. Positioning of the working units and machine function control via AC brushless servomotors and digital drives. Hnsdpfeyymz Uex Ag Eep CNC CONTROL The control unit consists of a numerical controller for the milling and drilling machines, and a connected personal computer with graphical user interface "XILOG PLUS". PC-office system: Windows XP - 17" color LCD monitor - QWERTY keyboard - Swiveling control panel - Machine software: Xilog Plus Xilog Plus features Programming - Parametric, graphic and ISO programming - Import of DXF and ASCII files - Straight or circular interpolation in three axes, linear in space, or spiral in the selected plane - Supported programming assistants for graphics and syntax in drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Option for workpiece zero-point offset to perform drilling on inclined or curved panel sides - Full compatibility with CAD/CAM Routocam (SCM) and AlphaCam Integrated additional functions - Calculator for direct transfer of computed data - …

Būklė: naudotas, Gamybos metai: 2023, Pjovimo zona: 5600x5600 mm 1x Gabbiani G 3 130 (56) – aukštos našumo plokščių pjovimo staklės 1x kompaktiškas etikečių spausdintuvas 1x valdymo pultas „eye-M EVO“ 1x žmogaus ir mašinos sąsajos programinė įranga (HMI) MAESTRO ACTIVE 1x Maestro pattern 1x didelio našumo stacionarus oro pagalvės stalas su kreipikliu, 2500x600 mm, su įleidimo voleliais 3x didelio našumo judantis oro pagalvės stalas – 2500x600 mm, su įleidimo voleliais 1x dvigubas šoninis automatinis lygiavimas su variklio pavara 1x kojinis jungiklis darbo ciklo START/STOP 1x grioveliavimo įrenginys su pjūklo aukščio reguliavimu per valdymo pultą 1x „Autosetting“ įrenginys pjovimo vežimėlyje pjovimo ilgiui/pločiui nustatyti 1x pagrindinio pjūklo variklis 25 AG (18 kW) 50 Hz su žvaigždės-trikampio paleidimu 1x greitoji pjūklo diskų fiksacija su mechaniniais flanšais „AKE“ 1x selektyvus griebtuvų uždarymas (plotas 0–1600 mm) 3x papildomi dvigubi griebtuvai 4x papildomi griebtuvai su atskiru pirštu 1x kompaktiškas biuro etikečių spausdintuvas 1x Cut editor 1x Maestro optiwise – Advanced – N. 1 licencija 1x Maestro connect: paslaugų sutartis 1 metams (rinkinyje „plug&play“ vartai) 1x stovas 1x MAŠINOS KALBA: vokiečių 1x PC KALBA: vokiečių 1x SPEC01 specialus modelis 01 1x Europiniai saugos reikalavimai (CE ženklinimas) įskaitant 123 val. paleidimo vietoje (Vokietijoje) (dienos darbo laikas – 8 val., įskaitant atvykimą ir išvykimą). Įskaitant 1 dienos internetinius mokymus MAESTRO OPTIWISE PRO (pagal poreikį) Įskaitant MAESTRO CONNECT 1 metams Įskaitant MAESTRO PATTERN IMPORT (255 € nemokamai)!!! VISO METŲ GAMINTOJO GARANTIJA PIRMĄ METAIS!!! Hedpfxsxlvkto Ag Eenp Sandėlio vieta:

Būklė: naudotas, Gamybos metai: 2013, bendras aukštis: 2 240 mm, bendras ilgis: 5 240 mm, bendras plotis: 2 400 mm, Tuščioji masė: 2700 kg - Pagaminimo metai: 2013 m. - Dokumentacija: yra - CE žymėjimas: yra - CE sertifikatas: nėra - Serijos numeris: AA1/017355 - Frezavimo velenų skaičius [vnt.]: 1 - Frezavimo velenas Nr. 1: - Valdomų ašių skaičius [vnt.]: 3 - Maksimalus veleno sūkių skaičius [aps./min.]: 24 000 - Pagrindinio variklio galia [kW]: 9,5 - Frezavimo stalo tipas: balkinis stalas - Gręžimo įrankiai: yra - Horizontalūs gręžimo velenai [vnt.]: 6 - Vertikalūs gręžimo velenai [vnt.]: 12 - Pjovimo įrenginys: yra - Sistema/programinė įranga: SCM Maestro - Darbinis plotas X [mm]: 3050 - Darbinis plotas Y [mm]: 1250 - Z ašies darbinis plotas [mm]: 1810 - Y ašies maksimalus eiga [mm]: 1550 - Įtampa [V]: 400 - Srovės suvartojimas [A]: 31 Hedownii Rspfx Ag Esnp - Transportavimo matmenys: 5240 mm x 2400 mm x 2244 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 2700 kg - Transportavimo pakuočių skaičius [vnt.]: 1 Finansinė informacija PVM: nurodyta kaina yra be PVM PVM / diferencinis apmokestinimas: įmonėms PVM galima atskaityti Pristatymas ir senos įrangos atpirkimas galimi bet kuriuo metu, visoms pramoninėms prekėms Glenn Smeets

Būklė: naudotas, Gamybos metai: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020mm Y: 1,830mm Z: 675mm Clearance Height: 300mm (starting from 50mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic design made from thick-walled steel. It is reinforced with welded-in parts across the entire machine bed, providing extreme stability. The table design, with a large base, is the key to ensuring lasting precision and stability. The machine layout allows users to maintain an optimal workflow while requiring minimal floor space. The movable gantry beam is built from a solid monoblock. It is positioned along the X-axis on prismatic, ground guides using recirculating ball carriages. On this mobile unit carrier, the working unit is also mounted on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axis movements take place on prism linear guides with large cross-sections and recirculating ball shoes with large contact areas, ensuring optimal sliding even at maximum speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large-diameter recirculating ball screws guarantee accurate positioning of the working unit along the movable gantry (Y and Z axes). Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality actuators and brushless motors. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety Device with Bumper and Light Curtain 1 Bumpers with sensors are installed around the movable stand, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the access restrictions of floor mat systems. It prevents unwanted interruptions of the machining cycle and gives greater freedom of movement around the worktable. CE Certification for the Safety System 1 Safety protection fence 1 Protective fencing at the sides and rear Hsdpexy Tmnjfx Ag Eenp Automatic Central Lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is managed by CNC control at regular intervals, eliminating manual intervention at the machine. Central Extraction Connection 1 All individual extraction ports of the processing units are combined into a central extraction nozzle. Various slide gates inside the nozzle are controlled by the NC unit, reducing the required extraction air flow. Chip Conveyor 1 Maxi - 5-axis Electrospindle 11 kW HSK-63 "Prisma K 1" 5-axis electrospindle with 11 kW output at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface: HSK 63F 18 kW Inverter provides stepless, even power delivery Max. rotation: B-axis = 200° (±100°) C-axis = 650° Thanks to non-orthogonal axes, it is possible to perform complex horizontal positioning within a small working area. This enables the machining of complex geometries without collision risk.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, galia: 7 kW (9,52 AG), įėjimo įtampa: 400 V, pjovimo aukštis (maks.): 136 mm, pjovimo plotis (maks.): 900 mm, pjūklo disko skersmuo: 400 mm, aukščio reguliavimo tipas: elektrinis, bendras svoris: 690 kg, Įranga: dozatorius, pjūklo disko apsauga, Parodinis įrenginys; Straipsnio Nr. 5504933 su specialia įranga; apvado rėmas su CompeX įtaisu, pločio atramos skaitmeninis indikatorius. Holzkraft minimax si 4 - 400 / 32 M A, gamintojas SCM Group, Hnodpfxjziwz Uj Ag Ejp pjovimo ilgis 3200 mm, pjovimo aukštis 136 mm, pjūklo diskas 400 mm, 7,0 KW variklis, įpjovimo diskas su atskiru varikliu, pjūklo agregato variklinis aukščio ir pasvirimo reguliavimas pjūklo disko greitis reguliuojamas dviem režimais, įjungimo ir išjungimo jungiklis integruotas stumdomame vežimėlyje, praktiška pjūklo disko švytuoklinė apsauga,

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, working width 220 mm Hjdpoyxlqxsfx Ag Eonp working height 120 mm 4 heads spindle diameter 40 mm variable feed speed control star-delta start head adjustment in two axes electric adjustment of pressure beam spring-loaded feed roller clamps spindle speed 6000 rpm

Būklė: geras (naudotas), Codice: 0400 Marca: SCM GENIUS Modello: M 10/SI Macchina combinata universale a 6 lavorazioni con 3 motori per lavorazione del legno, falegnameria, mobili, arredamento su misura, infissi, porte e varie applicazioni similari. Specifiche tecniche: Motori trifase V.380/50 Pialla a filo: Lunghezza totale piani 1400 mm Larghezza piani 300 mm N° 3 coltelli Motore Hp 3 Pialla a spessore: Larghezza massima piallatura 300 mm Altezza massima piallatura 150 mm Velocità avanzamento 7 m/min Sollevamento tavola tramite volantino Sega circolare: Diametro massimo lama 250 mm Foro 20 mm Altezza massima taglio 85 mm Larghezza massima taglio 700 mm Inclinazione lama 0–45° Motore 2 Hp Sega a carro: Carro scorrevole a bandiera montato su barra mobile Toupie: Diametro albero toupie 30 mm Corsa verticale 120 mm Velocità albero 3000/4500/6000/7500 rpm Diametro massimo utensile 150 mm Sporgenza massima albero sopra piano 100 mm Motore 2 Hp Cavatrice: Dimensioni tavola mm 200 x 400 Mandrino 0–16 mm Corsa longitudinale 150 mm Corsa trasversale 90 mm Regolazione verticale tramite volantino Hnedszbu Azopfx Ag Eop Dimensioni totali macchina assemblata mm 2000 x 1400 x 860 h Peso kg 450

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, labai gerai išlaikytas 4 peilių reikalas, mažai naudotas maksimalus apdirbimo plotis – 230 mm maksimalus apdirbimo aukštis – 120 mm veleno variklio galia: U – 5,5 kW Hnsdpfszlk U Hsx Ag Eep L ir R – 7,5 kW O – 5,5 kW komplektuojamas su „Tersa“ tipo obliavimo galvutėmis.

Būklė: naudotas, mašinos/transporto priemonės numeris: 008047, Pozicija 1: Šepetėlinė mašina SCM-BRAVOROBOT P1 Pozicija 2: Dažymo mašina SCM-BRAVOROBOT P1 Pozicija 3: Perkėlimas SCM-BRAVOROBOT P1 Hnedpfx Agow Idbyj Ejp Pozicija 4: Suslėgto oro džiovintuvas SCM-BRAVOROBOT P1 Pozicija 5: Lako džiovinimas SCM-BRAVOROBOT P1

Būklė: naudotas, Gamybos metai: 2005, Darbinis plotis: 180 mm Darbinis aukštis: 110 mm Darbiniai velenai: 4 Hnsdpfxsyq R Aij Ag Eop Velenų išdėstymas: apačioje, dešinėje, kairėje, viršuje Variklio galia – apatinis & viršutinis velenas: 7,5 kW Variklio galia – dešinysis & kairysis velenas: 7,5 kW Apatinio veleno reguliavimas: - Dešinio veleno reguliavimas: - Kairio veleno reguliavimas: rankinis ratukas Viršutinio veleno reguliavimas: rankinis ratukas Obliaus galvos apačioje & viršuje: Centrolock Obliaus galvos kairėje ir dešinėje: Centrolock su profiliavimo galimybe Padavimo greitis: 2 Padavimo volų prispaudimas: spyruoklė Srovės sunaudojimas: 32,8 A Ištraukimo jungtis: Staklių ilgis: Staklių plotis: Svoris:

Būklė: naudotas, Gamybos metai: 1999, Sliding table length: 3800 mm Cutting width at rip fence: 1500 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Rip fence display: digital Crosscut fence display: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 7.5 kW Motor brake: yes, automatic Extraction port: 80 mm and 120 mm Machine length: 3900 mm Hodpfx Agjvxi Dds Ejnp Machine width: 2200 mm Weight: 1000 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Pagaminimo metai: 2013 Frezavimo galva Darbo zona X: 3000 Darbo zona Y: 900 Darbo zona Z: 50 Atskiri agregatai: 1 Hsdpfx Agew Npyqs Esnp Vertikali gręžtuvas: 12 Horizontali gręžtuvas X: 4 Horizontali gręžtuvas Y: 2 Griovelių pjūklas: Taip Stacionarus įrenginys: Taip Tvirtinimo sistema: Spaustuvai Apsauga: šviesos užtvara Valdymas ir programinė įranga SCM XILOG Minimali užimama vieta: 3920x1170x2150

Būklė: naudotas, Gamybos metai: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Travel of X axis mm 750 Max. traverse speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles Quantity 7 (4X-4Y, one shared) Horizontal spindles (Y axis) Quantity 2 (1+1) Horizontal spindles (X axis) Quantity 1 Fixed grooving saw (direction) X Saw blade diameter mm 100 Max. saw blade thickness mm 5 Motor output kW (HP) 1.5 (2) Spindle speed rpm 3350 Saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air velocity m/sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill shank D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1+1 drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor output 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece positioning and aggregate drive A CNC-controlled vacuum suction system clamps and positions the workpiece sequentially under the working unit during machining. X and Y axis movement is on THK guides with transmission via reinforced toothed belts. Z axis movement is pneumatic on ball-bushing guides with positioning via adjustable stops. Positioning of working units is achieved with DC technology and drives. CNC CONTROL The control was specially developed for use in drilling and milling machines. CN - 7" color display with touchscreen functionality - Alphanumeric keyboard - Self-diagnosis and operator language-specific error or fault messages Programming - Programming via CN - automatic optimization of drilling operations - Option for panel zero-point shift - Storage and import of drilling programs via USB dongle - Import of drilling programs from external CAD/CAM software Configuration - User interface in same language as instruction manuals Graphical representation of unit configuration Vacuum suction system "B-Power" Vacuum suction cup with double vacuum connector, recommended for highly porous panels (e.g. light MDF). Machine operation interface Software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; multicore processor recommended - RAM: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The code includes a DVD for installation and a USB key) Xilog Maestro features Programming - parametric, graphical programming - Supported programming with graphics and syntax assistance for drilling operations - Ability to create and save machining macros Integrated additional functions - Self-diagnosis and operator-language error or fault messages - User interface in Hjdpfovvi I Rex Ag Eenp

Būklė: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Hjdpfx Ajvwbp Aeg Esnp

Būklė: naudotas, Gamybos metai: 2011, Apdirbimo dydis X kryptimi: 2770 mm. Apdirbimo dydis Y kryptimi: 1220 mm. Apdirbimo storis (Z matmuo): 80 mm. Mašinos konstrukcija: portalo tipo staklės. Pagrindinio veleno galia: 11,0 kW. Pagrindinio veleno greitis: 1500–24000 aps./min. Vektoriškai valdomas velenas: taip. Tvirtinimo sistema: HSK 63 F. Veleno aušinimas: oro aušinimas. Ašių skaičius: 3. Įrankių keitiklis: taip, vnt. Įrankių keitimo vietų skaičius: 10 vnt. Rašomosios mašinėlės klaviatūra: taip. Pelė: taip. Programinė sistema: Xilog Plus. DXF sąsaja: taip. Galima prisijungti prie interneto: taip. CD-ROM įrenginys: taip. Stalo tipas: tinklelinis stalas. Atramų sistema: atraminiai cilindrai. Vakuuminių siurblių skaičius: 1. Vakuuminio siurblio galia: 250 m³/val. Apsauga: saugos kiliminiai takai. Hnsdpfxovvi Hte Ag Ejp Sandėlio vieta: Sonnefeld

Būklė: naudotas, Gamybos metai: 2004, Sandėlio vieta: Nattheim Hnjdpfx Agjvvi Hyj Eop

Būklė: naudotas, Gamybos metai: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE – WORK CELL VERSION X400 CELL Drilling and milling made for you! The numerically controlled machining center is equipped with a comprehensive range of milling and drilling tools to meet any requirement in the processing of wood and similar materials. - Powerful drilling spindles with 8,000 rpm and proprietary technology, featuring the most robust spindle available on the market, with over 1,000 maintenance-free operating hours - Better equipped, with a wide range of configuration options via the multifunction table to optimally adapt the machine to specific requirements - Easier and more intuitive programming with the integrated Cad-Cam module MAESTRO CNC - User-friendly operation: the worktable is always accessible, the control cabinet and vacuum pump are integrated, and with the PRO SPACE configuration, there are no safety barriers Structural Frame The structural frame is composed of a particularly robust monolithic steel base, highly ribbed and extremely rigid; the exceptionally wide support surface has been specially designed to give the machine enhanced stability, ensuring lasting precision regardless of working conditions and eliminating the need for anchoring to the floor. The base provides a large and solid support for the moving gantry: the work unit is thus furnished with a balanced, stable, and resilient structure which withstands the highest loads, delivering superior performance and greater accuracy. The moving gantry is formed from a single robust component that is anchored to the base on both sides and glides on high-quality prismatic guides with recirculating ball carriages. Dual drives along the X-axis ensure maximum performance even under intensive workloads. Movement of the lower moving unit (X-axis) and the working unit along the beam of the moving unit (Y-axis) is accomplished via a helical rack and pinion drive; this provides greater tooth-to-tooth force, resulting in increased acceleration and higher speeds along both the X and Y axes. The specially designed helical gearing reduces mechanical wear and ensures quieter operation. Hedpfjvvi N Iex Ag Eonp The vertical Z-axis is driven by a ball screw, ensuring perfect balance under dynamic loading and rapid acceleration/deceleration. The main milling unit is directly coupled to the carriage of the Z-axis, ensuring absolute finishing quality by completely eliminating vibration. Motion along each axis (X-Y-Z) is achieved using brushless motors powered by static inverters, providing: - Reduced processing times thanks to improved acceleration - Increased positioning accuracy with high-resolution encoders - Automatic zero-point referencing when the machine is powered on due to absolute encoders - Elimination of general maintenance associated with brushes, as the brushless system is maintenance-free Axis movement management and overall machine function control is performed via an industrial NS module with digital D

Būklė: naudotas, Gamybos metai: 1999, Sandėlio vieta: Nattheim Hjdpfx Agevvi Rxs Eenp

Būklė: naudotas, Gamybos metai: 1995, Sandėlio vieta: Nattheim Hedpfx Aswkirqog Esnp