Probat Ug22 Retro pirkti naudotą (622)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 3 048 mm, padavimo eiga Y ašimi: 813 mm, padavimo ilgis Z ašis: 762 mm, valdiklio modelis: NGC, veleno greitis (maks.): 7 500 aps./min, įrankių magazino lizdų skaičius: 30, Įranga: dokumentacija / vadovas, drožlių transporteris, 50 konuso formos velenas su 2 greičių pavarų dėže. Dkedpfx Abezr U S Ne Hou Galima pritaikyti pagal jūsų poreikius. Idealiai tinka dirbant su sunkesnėmis medžiagomis ir didesnio skersmens pjovimo įrankiais.

Būklė: labai geros būklės (naudotas), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Description: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measurement system O-INSPECT from ZEISS enables optimal optical or tactile measurement of all features. The CALYPSO software allows for the simultaneous display of actual state, nominal profile, and deviations, making it very easy to identify and interpret measurement results. General Data: Dimensions: Width 1055 mm x Length 1351 mm x Height 1770 mm Measuring Range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM: 800 kg Workpiece, max.: 20 kg Noise Level of CMM: < 70 dBA Electrical Data: Mains Voltage: 100, 110, 120, 125, 230, 240 V~ (± 10%) Power Type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5%) Power Consumption: max. 1500 VA Fuses: - At 230 V or 240 V: C 16 A - At 100 V or 125 V: 15 A Travel Speeds: Creep Mode (SLOW): 0 to 5 mm/s Setup Operation: 0 to 70 mm/s Serial Measurement Operation - Axis (X, Y): max. 200 mm/s - Axis (Z): max. 50 mm/s - Axis (3D): max. 287 mm/s Environmental Conditions: The following conditions must be met for proper operation of the coordinate measuring machine: - Ambient temperature for operational readiness: +17˚C to +35˚C - Relative Humidity: 40% to 70% (non-condensing) - Room temperature during measuring operation: 20˚C ±1 K - Altitude above sea level: - 100-125 V: max. 3000 m - 230-240 V: max. 2000 m Probe System: Probe System: CFS Probe Type Data: - Probe Type: CFS 2mm - Measuring Range: 2 mm; Working Distance: 61 mm; Spot Diameter: 12.5 µm - Measurable Surface Tilt Relative to Incident Direction: 90 ± 15° - Measuring Range: 3 mm; Working Distance: 22.5 mm; Spot Diameter: 12 µm - Measurable Surface Tilt Relative to Incident Direction: 90 ± 30° - Measuring Range: 10 mm; Working Distance: 70 mm; Spot Diameter: 24 µm - Measurable Surface Tilt Relative to Incident Direction: 90 ± 20° *Values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and Resolution: - Mass of Rotary Table: 7 kg - Resolution: 0.15’’ Dynamics: - Angular velocity: max. 50˚/s - Rotational speed: 8.3 min⁻¹ Scope of Delivery: The standard version of the O-INSPECT coordinate measuring machine includes the following components: - Coordinate Measuring Machine (CMM) - Control Unit (integrated) - Control Panel - Computer with peripherals - Software: CALYPSO 5.2 - Documentation - Probe System - Reference Probe - Calibration Standard - Calibration Template Scope of delivery: (Zeiss Coordinate Measuring Machine as shown) Condition: used (Technical data subject to change and errors excepted!) Djdpozii Dhefx Ab Hoku Please enquire about transport options before purchase. For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Aluminum silo with extended base flange - used - Capacity: approx. 48,000 liters Tank type: silo Condition: used Suitable for foodstuffs: yes Design: vertical Internal diameter: approx. 2,400 mm Cylindrical height: approx. 13,750 mm Total height: approx. 15,000 mm Specific gravity of medium: 0.8 t/m³ Operating pressure: non-pressurized Material / Finish Shell material: aluminum Equipment Support type: foot ring/extended base flange Top floor: conical top Slope: approx. 15 % Bottom type: cone Cone angle: 60 degrees Top head: 1 x flange DN 100 PN 10 (filling) 1 x flange DN 150 PN 10 (venting) 1 x flange DN 150 PN 10 (level measurement) 1 x flange DN 100 PN 10 (reserve) 1 x female thread 1 1/2" (sensors) Dkodpfx Aex Stccsb Hou 1 x roof edge guardrail with handrail 2 x crane lugs Shell: 1 x access door at base flange (approx. 880 x 1800 mm) 5 x pipe supports for filling pipe 5 x pipe supports for overflow pipe 1 x filling pipe DN 100 (filling lines and connections for silo vehicles need to be partially retrofitted) 1 x overflow pipe DN 80 1 x female thread 1 1/2" (measuring probe) Bottom: 1 x cone (60°) 1 x flange DN 80 (overflow pipe) Fittings: The currently installed measuring and control equipment (where available) is included. However, no guarantee is given for its functionality! Otherwise as per photos and drawings. Documentation: Drawing

Būklė: naujas, X ašies eiga: 800 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 800 mm, Highlights: - High-performance motor spindle with 16,000 rpm | 206 Nm - 227-tool magazine capacity - High-pressure coolant system (80 bar) _____ Base machine G440 Dkjdet Hrz Dspfx Ab Hsu Axis travels: X=800, Y=800, Z=800 mm Power supply: 400 V, 50 Hz, TN-S Machine cooling system (approx. 20 kW) with air-cooled chiller SIEMENS SINUMERIK 840D sl with GROB4Pilot access machine control panel Motor spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil/air lubrication (GROB) GROB Spindle Diagnostics GSD Rotary table with GROB pallet clamping system (B'-axis) Dual disc magazine HSK-A 63 with 227 (47+10|50|60|60) tool positions Tool cleaning unit Electromechanical tool length measuring device Pallet changer system for two pallets Manually rotatable setup station Manual setup station door for manual loading/unloading Palette, 500x500 mm, grid with threaded holes Pallet equipped with 4 fluid connections Scraper belt chip conveyor for large chip volumes, discharge height 1,100 mm High-pressure coolant system (10-80 bar, through-spindle coolant) Compressed air supply through spindle center External compressed air supply via flexible hose Oil skimmer for coolant maintenance Rinsing gun in the working area Workpiece clamping system in the work area - KP1: pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: pressure oil, manual pressure reduction, 30-200 bar (H1.1) Workpiece clamping system in the pallet changer setup station - KP1: pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP3: pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP4: pressure oil, manual pressure reduction, 30-200 bar (H1.1) Preparation for infrared tool probe OMP60 (RENISHAW) Rotating viewing window for work area door Remote machine diagnostics with access control switch 12-month warranty

Būklė: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 48 804 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 560 mm, valdiklių gamintojas: Siemens, valdiklio modelis: Sinumerik 840D, bendras ilgis: 7 000 mm, bendras plotis: 5 000 mm, stalo plotis: 400 mm, stalo ilgis: 500 mm, veleno greitis (maks.): 8 000 aps./min, veleno veikimo valandos: 23 574 h, aušinimo skysčio tiekimas: 50 juosta, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been regularly serviced and is immediately ready for operation, featuring a pallet changer and extensive accessories. Ideally suited for tool and mold making, as well as series production. Technical Specifications -Travels: X 600 mm / Y 560 mm / Z 560 mm -B axis: 360° x 0.001° (60 rpm) -Spindle speed: 0–8000 rpm (stepless) -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Feed rate: 1–60,000 mm/min -Rapid traverse: 60 m/min Tooling & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm -Max. tool length: 350 mm -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 s -Pallet change time: 6 s Machine Requirements & Dimensions -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm -Total power requirement: 20 kW -Machine weight: approx. 16,000 kg -Footprint (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe -Tool breakage monitoring in machining area -Pallet storage (4 slots) -Pallet sequence operation -Enclosed work area protection per UVV -Network capability -Technical documentation & layout plan available Components Renewed -Hydraulic system motor & pump replaced -Partial renewal of hydraulic and pneumatic hoses -Control cabinet LT module replaced -Knoll unit drum replaced Operating Hours / Running Times - Total switch-on time approx. 48,804 h The counter runs whenever the machine is switched on – i.e., also during setup, maintenance, or idle times. - Total spindle running time 23,574 h Special Features - Machine under power, immediately ready for use - Inspection possible at any time by prior arrangement - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport available (at extra cost) All information has been provided to the best of our knowledge. Subject to changes, errors, and prior sale. Dsdpfx Aox Icyvjb Hsku

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Portal machining center for HSC milling The machine operates within a Röders RCM Automation system. It can therefore be integrated into an automated manufacturing environment. Technical data - Travel ranges: X 800 mm, Y 600 mm, Z 400 mm - Drive power: 17 kW - Spindle speed: 36,000 rpm – Fischer motor spindle - Spindle taper: HSK E50 - Feed rate: up to 60 m/min Work table - Dimensions: 900 mm x 700 mm - Max. workpiece weight: 800 kg Control - Röders HSC RMS6, including software for: Milling simulation and pocket machining - Electronic hand controller and mouse - Ethernet interface integrated into Windows NT - Remote maintenance capability for RSM 6 machine control Machine construction - Portal design with temperature stabilization of the machine frame Tool changer - 30 stations with collision monitoring Equipment - Cooling unit for the milling spindle Dsdpfxevri Nms Ab Hoku - Infrared measuring probe for automatic: Tool length compensation, diameter measurement, and tool breakage detection - Microjet spray cooling and lubrication unit - Fixed bearing and spindle nuts are water-cooled - Full safety enclosure (crane loading possible) - Connection for workspace extraction system - 2 chip conveyor screws - Workpiece cleaning via separate air nozzles Machine data - Footprint (excluding service areas!) LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm - Weight approx. 13,000 kg - Connected load 400V, 50/60 Hz, 3 phases The machining center is in good condition. Maintenance and servicing have been carried out regularly. A demonstration under power and in operation is possible by prior appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Būklė: naudotas, Gamybos metai: 2003, Coordinate Measuring Machine Wenzel LH 54 (Year of manufacture 2003) in well-maintained and fully functional condition. The machine features a robust granite structure combined with air-bearing guides. This design ensures that the bridge and axes move almost frictionlessly and uniformly over the granite base—a well-proven basis for high measurement accuracy and repeatability. The LH 54 is engineered for reliable use in quality assurance and series production, providing consistent measurement results even during ongoing operation. Prior to delivery, our service technicians in Remscheid inspect the machine and perform a test run to guarantee full functionality. The system is currently powered and can be inspected and demonstrated at any time. PC System (Upgraded): - After purchase, a completely new PC system meeting current WENZEL requirements will be installed. This modern system is comprehensively tested and verified before the machine is finalized for the buyer. Optional Services (by agreement): - Installation and commissioning of the CMM within North Rhine-Westphalia - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Procedures according to DIN EN ISO 10360-2:2010-06 - Maximum spatial diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Inclusive documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for WM | Quartis measurement software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. This retrofit includes additional service tasks and supplementary hardware components, which will affect the final purchase price accordingly. Further software modules, adaptations, as well as individual accessories and clamping systems, are available upon request—optimally tailored to your specific measurement requirements. Measurement range X: 500 mm Measurement range Y: 1,000 mm Measurement range Z: 400 mm Measurement uncertainty: Eo = 2.5 + L/300 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2040 Basic PC System: Windows 11 (Current configuration) Probe system: TP20 Probe head: PH10T Dkedpfx Abjy Dcivs Hou Probe module: 1 × TP20 Standard Force Module Indexing head interface: PHC10-3 PLUS Probe interface: PI200 (Combi) Joystick: HT400 Change rack: MCR20 (not equipped) Accessories: Probe stylus kit M2 | Mouse & keyboard | 2 x 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and preparation for transport | Packaging | Loading onto customer-provided truck Included transport frame: On loan

Būklė: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 200 mm, Y ašies eiga: 1 200 mm, Z ašies eigos atstumas: 1 200 mm, veleno greitis (maks.): 12 000 aps./min, bendras ilgis: 9 300 mm, bendras aukštis: 4 300 mm, stalo plotis: 1 250 mm, bendras plotis: 6 900 mm, stalo ilgis: 1 250 mm, bendras svoris: 50 000 kg, 5-Axis Bed-Type Milling Machine AX5 TLF, 2009, Heidenhain iTNC530, Rotary Table, HSK-A100 Offer Description: For sale: AX5 TLF bed-type 5-axis milling machine, year 2009, equipped with an integrated rotary table and fully programmable axes. The machine is designed for high-precision multi-axis machining, including complex workpieces requiring simultaneous 5-axis operation. The configuration features a swivelling head and rotary table, providing extensive technological capabilities for machining large-sized components. The machine comes fitted with a Heidenhain iTNC530i CNC control, a spindle with HSK-A100 tool interface, and through-spindle coolant. Additional features include a Renishaw touch probe and a 30-position tool magazine. For further details, photos, sales conditions, or to arrange an inspection, please contact us. Dkedpfxjyzfb Ns Ab Hsu Technical Specification: Model: AX5 TLF Type: 5-axis bed-type milling machine Year of manufacture: 2009 Travel ranges: X axis: 3200 mm Y axis: 1200 mm Z axis: 1200 mm B axis (swivelling head): ±95° C axis (rotary table): 360° Rotary table: Diameter: 1250 mm Spindle: Taper: HSK-A 100 Max spindle speed: 12,000 rpm Through-spindle coolant Control: Heidenhain iTNC530i Additional equipment: Renishaw touch probe Tool magazine: 30 positions Machine dimensions: Length: 9300 mm Width: 6900 mm Height: 4300 mm Weight: 50,000 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2013, veikimo valandos: 39 945 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 450 mm, Y ašies eiga: 580 mm, Z ašies eigos atstumas: 400 mm, valdiklių gamintojas: Heidenhain iTNC 530, bendras aukštis: 2 900 mm, bendras ilgis: 5 500 mm, bendras plotis: 2 650 mm, veleno greitis (min.): 28 000 aps./min, aušinimo skysčio tiekimas: 40 juosta, Year of manufacture: 2013 CNC control: Heidenhain iTNC 530 Axes Travel distance X-axis mm: 450 Travel distance Y-axis mm: 580 Travel distance Z-axis mm: 400 C-axis indexing degrees: 360° (0.0001) A-axis indexing degrees: +10 / -110° Feed rates m/min: 80 Rapid traverse m/min: 80 Axis acceleration m/s²: 13 NC milling/turning table: Pallet system: System 3R (21 pallets type GPS 240, 30 pallets type GPS 120, and 24 pallets type ITS50) Pallet dimensions mm: baseplate for reference pallet Max. workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm); for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Max. spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/continuous) Cooling Dksdpfsxv Av Rjx Ab Hju Coolant supply through spindle bar: 40 Tank capacity liters: 600 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 120 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Infrared probe Internal coolant supply Rotating viewing windows Rinse gun Purge air through spindle center selectable via M-function Laser tool measurement for tool length and diameter 3D quickSET Preparation for external pallet transfer Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Tool holders not included Tools not included Paper band filter Machine operating hours: Power-on time: 62,983 Spindle hours: 39,945 Total power requirement kVA: 55 Base machine: dimensions/weight Length mm: 5,500 Width mm: 2,650 Height mm: 2,900 Weight kg: 9,500 + System 3R

Gamybos metai: 2006, veikimo valandos: 44 825 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1167000036, TECHNICAL DETAILS Travel range X-axis: 700 mm Travel range Y-axis: 800 mm Travel range Z-axis: 800 mm B-axis: 360º B-axis increment: 0.001º Spindle speed: max. 10,000 rpm Spindle drive power: 30/20 kW (40%/100% duty cycle) CNC control: SIEMENS 840D Powerline ShopMill Classic Number of pallets: 2 Pallet dimensions: 500 x 500 mm Dkjdpfx Abslu Ex Rj Heu Workpiece diameter: 800 mm Workpiece height: max. 1,350 mm Tool holder: SK-40 Number of tools in magazine: 45 MACHINE DETAILS Power-on hours: 64,431 h Spindle runtime: 44,825 h Total power consumption: 60 kVA Connection voltage: 400 V / 50 Hz Connection current: 100 A Coolant supply: 40 bar Tank capacity: 980 l EQUIPMENT - Chip conveyor - Rotating inspection windows - Operating mode 4 - High-pressure pump - Laser tool measurement for measuring tool length and diameter - Prepared for HEIDENHAIN probe

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1 790 58 450, tekėjimo ilgis: 990 mm, tekėjimo skersmuo: 160 mm, veleno greitis (maks.): 4 500 aps./min, veleno greitis (min.): 1 500 aps./min, X ašies eiga: 280 mm, Z ašies eigos atstumas: 2 400 mm, ašies variklio galia: 30 000 W, greitas poslinkis X ašimi: 30 m/min, greitasis eiga Z ašyje: 100 m/min, sukimosi greitis (min.): 1 500 aps./min, sukimosi greitis (maks.): 4 500 aps./min, bendras aukštis: 2 950 mm, bendras ilgis: 5 550 mm, bendras plotis: 2 550 mm, padavimo ilgis X ašis: 280 mm, padavimo eiga Y ašimi: 2 400 mm, X ašies padavimo greitis: 30 m/min, padavimo greitis Z ašis: 100 m/min, įvesties srovės tipas: trifazis, sukimo momentas: 191 Nm, bendras svoris: 16 000 kg, įvorės išorinis skersmuo: 215 mm, veleno nosis: A6, tvirtinimo skersmuo: 40 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Manufacturer: J.G. WEISSER SÖHNE GmbH & Co. KG Type: UNIVERTOR AS90/650RT General Features: Machine type: Horizontal shaft turning center with pick-up automation Application area: Complete machining of shafts and rotationally symmetric components Loading: Pick-up automation Machining types: Rough turning, hard turning, rough machining, finish machining Tool turret: 12-position turret with electric drive (VDI 40) Additional options: Driven tools, rotary turning, NC-adjustable steady rest, probe Main spindle: Spindle bearing diameter: 90 mm Spindle flange: A6 according to DIN 55026 Drive power (100/40% duty cycle): 18/23 kW or 23/30 kW Nominal speed: 1,500 rpm Maximum speed: 4,500 rpm Torque (100/40% duty cycle): 115/146 Nm or 151/191 Nm Dedpjvxf U Ejfx Ab Hsku Travels & axes: Max. turning diameter: 160 mm Max. chuck diameter: 215 mm Center distance: Max. 990 mm Travel X/Z-axis: 280 mm / 2,400 mm Max. feed force X/Z (40% duty cycle): 10 kN / 8 kN Max. rapid traverse speed X/Z: 30 m/min / 100 m/min Tailstock: Thrust force: 850 daN Center taper: MT4 Max. speed: 4,500 rpm Dimensions & Weight: Machine dimensions (L×W×H): 5,550 × 2,550 × 2,950 mm Weight: 16,000 kg

Gamybos metai: 2020, būklė: labai geros būklės (naudotas), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tool from DK Fixiersysteme Dodpfoyuut Tjx Ab Hoku - 3-axis CNC control - High-resolution CCD matrix camera - 1.5x magnification - Incident illumination via diode ring light, 4 sectors and 1 ring can be switched individually - Precision measuring table in X and Y - Diode laser as positioning aid - Joystick and trackball for axis movement with fast/slow toggle Camera-assisted measurement data acquisition Precise edge detection in transmitted and reflected light using intelligent image processing algorithms Compact and handy – high performance Fast operation with maximum measurement precision Special features: - incl. Renishaw TP 200 touch probe system - Switchable LED surface illumination - Diode laser for positioning aid With a measuring range of 300 mm × 200 mm × 200 mm, it excels especially with punched, plastic, rubber, and milled parts as well as tools, profiles, and circuit boards. Highlights of the measuring microscope include camera-assisted measurement data acquisition, fast handling, and its precision. Of particular note is the accurate edge detection in transmitted and incident light using advanced image processing algorithms. Despite its high performance, the WM1 300 CNC is compact and easy to handle, measuring only 900 mm × 950 mm × 950 mm.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, 3D Coordinate Measuring Machine / CNC Coordinate Measuring Device Manufacturer: MAUSER/ZEISS | Model: KMZ-G 602520 | Year of manufacture: 1988/2003 Optionally, a temperature-controlled hall is available. The machine has been regularly calibrated by ZEISS. The last calibration took place on 07.08.2025, the next calibration (recommended) is due for 08/2026. TECHNICAL DATA: Measuring ranges (LxWxH): 6,000 x 2,500 x 2,000 mm Axes Travels: - X-axis: 6,000 mm - Y-axis: 2,500 mm - Z-axis: 2,000 mm - Length measurement uncertainty according to VDI/VDE 2617: U3 = (5.0 + L/250)µm, V2 = 3.5 µm - Length measurement uncertainty according to ISO 10360-2: MPE_E = (5.0 + L/250)µm - Ambient conditions required to maintain specified accuracy: * Temperature range: 21°C +/- 3K * Temperature fluctuation: 0.5K/h, 1.0K/d, 0.5K/m Dedpjy Iub Ssfx Ab Hjku - Ambient conditions for operational readiness: * Temperature range: +15°C to 35°C * Humidity: 30 to 70% General Features, Equipment: - Bridge-type measuring machine with finely machined precision guides and recirculating ball shoes - Second Y-axis with granite rail and air bearings - High-resolution Zeiss scales - Form-fit drives on all 3 axes - Collision protection for the quill and probe head (with VAST probe system) for manual and setup mode - Safety position for crane locking - Scale temperature compensation - Microprocessor control - Calibration part: cube, star stylus - Reference stylus D = 8 mm, length: 115 mm - Calibration standard D = 30 mm - incl. basic software package - Load capacity: limited only by foundation design - Measuring system: VAST - Software: Zeiss CALYPSO - Documentation No guarantee of completeness or correctness of technical data and equipment. - Subject to prior sale -

Būklė: naudotas, Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, Werth Metrology: Scope - Check 650 MB Z 3D CNC 650x750x500 Standard accuracy Measuring range: X = 650 mm Y = 750 mm Z = up to 500 mm The available measuring range for workpieces is determined by the sensor and accessory configuration. Machine dimensions: W = 1230 mm D = 1560 mm H = 2550 mm Dksdpfx Ajy Uly Sob Hju Maximum permissible workpiece weight: 500 kg Device weight: approx. 1410 kg Bridge-type coordinate measuring machine for 3D CNC operation with standard accuracy. The multi-sensor concept supports combined measurement using multiple sensors. Technical features: - Base unit with hard stone construction in “moving bridge” design - Air-bearing bridge on the Y-axis with integrated air-bearing carriage on the X-axis and air-bearing Z-axis on granite base - Maximum permissible length measuring error (MPE) according to ISO 10360 or VDI/VDE 2617 (with motorized zoom optics, maximum magnification, or sensor with equal or better probing deviation) The machine works flawlessly. Test measurements on site are welcome. Important information: A computer is included in the sale, with operating system: Windows XP – runs smoothly – Werth measurement software version: see photo. If a current operating system is required, the update must be performed by the buyer.

Būklė: geras (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, DMG Mori M2 Pro, Year of Manufacture: 2023 / Commissioned: 2024, Control: Siemens Sinumerik ONE, Travel X/Y/Z: 1100/550/510 mm, Table size: 1400 x 600 mm, 24-position tool changer, Linear axes X/Y/Z: 24 m/min, Tool holder: SK 40, Spindle speed up to 12,000 rpm, Chip conveyor, Renishaw probe kit, Coolant spray gun, Enclosed cabin roof, Internal high-pressure coolant 20 bar, Bed flushing via M-function, Job Shop package for SIEMENS SINUMERIK ONE, Mechanical preparation for oil mist separator Ø 150 mm, 4th axis package: - Rotary table Lehmann Type: EA-510.L NE with indirect measuring system, Electrical and pneumatic preparation, Software preparation for rotary table operation, lRACYL software for cylindrical surface machining, Swivel cycle (Cycle 800), Clamping torque spindle lock: 800 Nm, Max. rotary speed: 65 rpm, Center height: 150 mm, Rotary table positioned along the X-axis, right side of the worktable, Manual 3-jaw chuck: diameter 160 mm, Manual tailstock for NC rotary table, stroke: 40 mm, center height: 150 mm, Tropical package, Active cooling unit for control cabinet, External and internal air blast (through spindle center), activated via M-function, Djdpfoza Aluex Ab Hoku External electronic handwheel, Software option: DXF import, Machine with 1800 spindle hours,

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 100418005, X ašies eiga: 1 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 590 mm, padavimo ilgis X ašis: 30 000 mm, padavimo eiga Y ašimi: 30 000 mm, padavimo ilgis Z ašis: 30 000 mm, X ašies padavimo greitis: 30 m/min, Y ašies padavimo greitis: 30 m/min, padavimo greitis Z ašis: 30 m/min, tvirtinimo skersmuo: 63 mm, bendras ilgis: 9 485 mm, stalo ilgis: 1 000 mm, bendras plotis: 4 609 mm, veleno greitis (maks.): 10 000 aps./min, bendras aukštis: 2 896 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 30 m/min, įvesties srovės tipas: trifazis, stalo apkrova: 300 kg, frezos galvos padėtis: Horizontal / Swiveling, ruošinio svoris (maks.): 300 kg, sukimo momentas: 136 Nm, sukimosi greitis (min.): 3 800 aps./min, sukimosi greitis (maks.): 16 000 aps./min, bendras svoris: 18 000 kg, darbo diapazonas: 1 000 mm, veleno nosis: HSK-A63, įrankio svoris: 6 g, šlifavimo veleno variklio galia: 54 000 W, ašies variklio galia: 54 000 W, Įranga: sūkių greitis be galo kintamas, „Zero hours“ HSTM 1000HD 5 ašių tekinimo-frezavimo centras Nenaudotas gamyboje / tik atlikti gamintojo patikrinimai ir prižiūrėtas. Pagrindinė mašina HSTM 1000HD X, Y, Z ašys su absoliučiu linijiniu davikliu A ašis Pasukama ašis / B ašis C ašis Galvutės prispaudimo slėgio reguliavimas CNC valdymo sistema SIEMENS 840D SL Nuotolinės diagnostikos sistema per „Ethernet“ Apsauginė lemputė Valdymo spinta su oro kondicionieriumi Frezavimo velenas, 16 000 aps./min., HSK-A63 Apdirbimo laiko skaitiklis Įrankių valdymo sistema su dvigubu griebtuvu Šaldymo blokas Hidraulinis blokas Mašinos korpusas su priekine durele, L formos Standartinė mašinos spalvų schema Dkedpfxjzvuu Sj Ab Heu Aušinimo skysčio tiekimo blokas, mažas slėgis, popierinis juostinis filtras Plovimo pistoletas Drožlių konvejeris Alyvos rūko išmetimo sistema Dokumentacija, 1 egzempliorius anglų kalba + CD Mašinos papildomų funkcijų paketas Minimalaus kiekio tepimo sistema Didelio slėgio aušinimas per veleną „BEMA“ automatiškai reguliuojami aušinimo skysčio purškikliai Įrankių matavimo sistema „BLUM“ Detalių matavimo sistema „BLUM 3D Probe“ „Rotoclear“ langas Rankinis ratas HT 2 Automatinės operatoriaus durys CAD / CAM programinės įrangos paketas „Hamuel Single Blade“ CSE „Siemens“ modeliavimas Transportavimo ir kėlimo įrankių rinkinys Paleidimo įrankių rinkinys Geometrinio matavimo rinkinys Yra Bangkoke, Tailande Siunčiama visame pasaulyje.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, X ašies eiga: 1 450 mm, Y ašies eiga: 1 200 mm, Z ašies eigos atstumas: 1 035 mm, Highlights: - Fastest chip-to-chip time in this working envelope - Optimized footprint - Automation ready ----- Machining Center G720F Travel X-axis = 1,450 mm Travel Y-axis = 1,200 mm Travel Z-axis = 1,035 mm Interference circle diameter 1,500 mm (2x) Table load capacity 2x 750 kg Work area lighting Machine control Siemens Sinumerik ONE Handheld unit HT10 Motor spindle 17,000 rpm, 64 Nm GROB spindle diagnostic (GSD) for twin-spindle machines Tool magazine, HSK-A-63 with 80 (2x40) positions Tool loading lift for parallel tool loading/unloading during main time Tool breakage monitoring Taper cleaning Compressed air gun Inspection window for view into tool change area/tool robot Lighting in tool change area/tool robot Minimum quantity lubrication system for 2 spindles as 1-channel version Pressure booster for minimum quantity lubrication unit incl. accumulator Decentralized MMS extraction Scraper belt conveyor with wear plate Basic installation clamping functionality Evaluation device for support monitoring Evaluation device for clamping query – flow rate Dksdjtiyzdopfx Ab Hsu Preparation for in-process measuring (Renishaw) Renishaw probe RMP400 extra long Direct loading by operator into the machine Two-hand operation, incl. automatic opening after cycle end HVO panel Preparation for direct loading into the machine by robot Machine status indicator lamp

Gamybos metai: 2003, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Horizontal machining center with hydrostatic linear guides on X, Y, Z axes for maximum precision TECHNICAL DETAILS X-axis travel: 2000 mm Y-axis travel: 1250 mm Z-axis travel: 1400 mm Dkodpfxopdqrhj Ab Hou Spindle speed: 20 – 5,000 rpm Torque: 750 Nm Tool holder: HSK 100 Controller: SIEMENS 840D Tool changer: 60 positions Pallet size: 1250 x 1250 mm Spindle power: 20 kW Rapid traverse (X-Y-Z): 18 m/min Table load capacity: 3 / 5 t MACHINE DETAILS Machine weight: approx. 15 t Space requirements: approx. 10.5 x 8.5 x 4.1 m EQUIPMENT NC rotary table 2-station pallet changer Control panel for loading station Internal coolant supply (IKZ) 3D measuring probe Chip conveyor Packaging for international shipping is not included! EXW delivery also possible.

Būklė: labai geros būklės (naudotas), Well-maintained scanning probe head for Zeiss UMM series With probe change capability Dkedpohgigbjfx Ab Hou

Gamybos metai: 2025, būklė: naujas, Integrated ISPM-15 treatment chamber housed in a 20-foot shipping container. Capacity for 144 Euro pallets or approximately 10 m³ of timber. Delivered fully assembled—simply connect to electric power and start operating. This model is highly efficient and economical for heat treatment processes. Certified program compliant in all countries, available with 3, 4, or 5 probes. 1-year warranty. Dkjdpfx Aohw Nryob Hou

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1999, X ašies eiga: 11 450 mm, Y ašies eiga: 3 500 mm, Z ašies eigos atstumas: 1 250 mm, Technical Description Travel Paths X-axis: 11,450 mm Dksdpfjtix S Nox Ab Hju Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of Z-axis slide: 360 x 360 mm Portal clearance: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling Unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Cross-section of the slide: 360 x 360 mm Vertical Head with Spindle Power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Infinitely variable feed rate in X, Y, and Z: 10,000 mm/min Feed force per axis: 25,000 N Tool holder: SK 50 Horizontal Angular Head with index 144 x 2.5°, with spindle SK50 Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal Pallet System 1 pallet shuttle with 2 storage stations 1 manual pallet transfer system between machine and shuttle 2 workpiece holding pallets: 5,000 x 2,500 mm Tool Changer Chain magazine: 80 positions Distance between chain positions: 130 mm Diameter of consecutive tools: 125 mm Max. tool diameter: 200 mm Max. tool length: 400 mm Max. tool weight: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling systems: - Cooling via adjustable nozzles - CTS (through-spindle coolant), 3,000 l tank, Capacity: 30 l/min, Pressure: 7 bar at the tool 2 pcs. chip conveyors: 1 Portal enclosure Probe, make: RENISHAW, Type: MP14 Electronic handwheel Remote diagnostics Tool management and wear monitoring Documentation supplied in duplicate: German / French CE certification Very well maintained, continuously serviced condition!

Gamybos metai: 1998, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, TECHNICAL DETAILS X-axis travel: 720 mm y-axis travel: 630 mm z-axis travel: 630 mm Control: OKUMA OSP 7000 Pallet size: 500 x 500 mm Spindle speed: 10 - 5000 rpm Tool magazine: 10-position pallet shuttle Tool holder: MAS BT 50 Tool positions: 200 slots EQUIPMENT - Tool breakage sensor - Renishaw probing system - High-pressure coolant system - Coolant mist extraction unit Dsdpfx Ask R Tp Usb Hsku - Spindle load and torque monitoring - Thread milling - Chip conveyor The scope of delivery is determined by the description text, not the images.

Būklė: reikia remonto (naudotas), Gamybos metai: 2005, mašinos/transporto priemonės numeris: 2731660/C 0000, Funkcionalumas: neveikiantis, veikimo valandos: 44 050 h, X ašies eiga: 600 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 425 mm, Machining center with chip conveyor and belt filter system. Travel X/Y/Z: 600/400/425 mm Spindle speed range: 20 to 18,000 rpm AC main drive: 35/25 kW (40/100% duty cycle) 3D trajectory control: SINUMERIK 840D powerline Tool changer / 25 magazine slots Tool holder: HSK-A 63 Pallet changer Clamping surface: 2x 660 x 400 mm Infrared measuring probe Heidenhain TS 641 Internal coolant supply (IKZ) 40 bar / 23 l/min / 600 L tank Scraper belt conveyor, discharge height 1000 mm incl. 200 L coolant tank Gravity-type paper belt filter Rotating inspection window Oil and emulsion mist extraction system with mechanical filter Work area flushing – chip flushing Flow rate: 100 l/min Pressure: 1 bar Electronic handwheel SIEMENS SINDIC data transmission between network and SINUMERIK 840D The machine is being sold as in need of repair. There is a fault with the tool changer sensor (position detection). Dkoderl Rwxspfx Ab Heu Technical questions please in writing. >>> Commercial sale

Būklė: naudotas, Gamybos metai: 2000, mašinos/transporto priemonės numeris: 2855, 2-ROLLER GLUE SPREADER OSAMA MOD. S2R1300 – 130 CM – CE COMPLIANT – USED - Glue loading accessory - Chiller (Thermal conditioner) Cooling system for vinyl, urea, polyurethane and other types of adhesives for 2- and 4-roller glue spreaders. This device is essential to maintain a constant glue temperature between rollers and to ensure preset pressing times, even under higher ambient temperatures, thereby guaranteeing end product quality. - CLT-A Mixer (Automatic two-component glue feeder) Automatic mixing and feeding system for roller glue spreaders using two-component vinyl or urea glues with catalysts, sulfates, and isocyanates. This device is necessary for in-line or continuous operations with two-component glues that require mixing at the glue spreader's inlet. It features a mixing head mounted on the roller glue spreader, supplied by special glue and catalyst pumps. The pumps draw products directly from storage tanks and are managed by level probes installed on the rollers, thus always ensuring a constant glue supply. (s6+s7) - Automatic roller washer - No. 2 rollers Dkodpfx Aor Iyf Tjb Hju - Voltage: 380/50 - Serial No.: 2855 - Year: 2000 - COMPLETE WITH MANUAL AND CE DECLARATION

Gamybos metai: 2008, būklė: labai geros būklės (naudotas), ZEISS ACCURA 16.24.10 RDS-CAA X 1,600 / Y 2,400 / Z 1,000 Dksdpfsnp Hvujx Ab Hju Probing system RDS CAA with VAST XXT technology Probe changer with 8 positions C99 controller Software upon request – Calypso / HolosNT 12-month warranty Installation, commissioning, and acceptance according to DIN EN ISO 10360-2,4,5