Optimum Uf 100 pirkti naudotą (26 769)

Būklė: geras (naudotas), Techniniai duomenys apie padėklų stelažų statramstį: Stelažų sistema: Bito Tipas: PRO Komplektacijoje yra: 01x padėklų stelažo statramstis, naudotas Medžiagos spalva: sendzimiro cinkuotas Rėmo profilis: P5 Profilio matmenys: P 100 x 76 x 2,25 mm Įskaitant skersines ir įstrižas atramas, pado plokštes ir statramsčio apsaugas Statramščiai yra iš anksto surinkti (varžtais tvirtinamas karkasas) Aukštis: 12 400 mm Gylis: 1 100 mm Itedex Hz Dwjpfx Abvsg Jūsų kontaktiniai asmenys mūsų įmonėje: P. Andre Evering P. Mario Klöver P. Falk Deutsch Bendroji informacija apie prekę: Ši prekė siūloma tik atsiėmimui. Jei pageidaujate prekę transportuoti ar išsiųsti, papildomos išlaidos priklausomai nuo pristatymo vietos ar kiekio gali būti pateiktos pagal užklausimą.

Būklė: geras (naudotas), Technical specifications for pallet rack beam: Racking system: Dexion Type: P 90 Included in the scope of delivery: 01x Pallet rack beam, used Material finish: Sendzimir galvanized Box profile: 100 x 50 mm Beam type: SLB 100|15 Connector: 5 hooks Clear span: 2,700 mm Max. load per pair of beams: 2,700 kg (with evenly distributed load) 02x Safety pins, used Version: Sendzimir galvanized For securing the longitudinal beams Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transport or shipping beyond this is subject to additional costs, which can be requested from us depending on the place of delivery and the scope of delivery. Itjdpfx Abswhwt Revog

Būklė: geras (naudotas), Scope of delivery includes: Iodpsi A Ik Ijfx Abvetg 01x Mounting bracket, used Surface: hot-dip galvanized Weight: 2.26 kg | each Mounting plate: 100 x 120 x 10 mm ( with 4 round holes Ø 10 mm ) Mounting flange: 120 x 140 x 10 mm ( 1 slotted hole 62 x 15 mm )

Būklė: labai geros būklės (naudotas), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Technical data for the pallet rack beam: Racking system: Redirack Scope of delivery includes: 01x pallet rack beam, used Material color: yellow U-profile: 100 x 50 mm Design: header beam Clear width: 2,707 mm 02x safety pins, used Design: fully galvanized For securing the longitudinal beams Prevents unintentional lift-out General information about the item: This item is only available for collection. If transport or shipping is required, this will incur additional costs, which can be requested from us depending on the place of delivery and scope of delivery. Our range of services at a glance: (Prices on request) Assembly and installation Please observe our general assembly terms and conditions. Racking inspection Rack inspections in accordance with DIN EN 15635, carried out to the requirements of BGR 234 for visual inspections of all racking systems. Itodpfeh S H N Uex Abvsg Delivery with our own fleet of vehicles (without unloading)

Būklė: geras (naudotas), Included in the scope of delivery: 01x pallet racking beam, used Material color: orange IPE profile: 100 x 55 mm Connector cleat: 5 holes Clear span: approx. 2,700 mm Each connector cleat: 5 holes Hole spacing: approx. 50 mm Hole diameter: approx. 11 mm 01x set of fastening hardware consisting of: 10x M10 bolts Isdpfxeibzgxo Abvstg 10x nuts 10x washers

Būklė: geras (naudotas), Techniniai duomenys apie padėklinių stelažų sijas: Stelažų sistema: SLP Pristatymo komplektacijoje yra: 01x Padėklinio stelažo sija, naudota Medžiagos spalva: pilka INP profilis: 100 x 50 mm Kabliukų skaičius: 3 HK (kabliai) Grynasis ilgis: 2 000 mm 02x Fiksavimo kaištis, naudotas Tipas: pilnai cinkuoti Skirti išilginėms sijoms apsaugoti nuo netyčinio iškėlimo Jūsų kontaktiniai asmenys mūsų įmonėje: Ponas: Andre Evering Itodpfx Ajxyvznobveg Ponas: Mario Klöver Ponas: Falk Deutsch Bendra informacija apie prekę: Ši prekė siūloma tik atsiėmimui. Jei pageidautumėte transportavimo ar išsiuntimo paslaugos, tai būtų papildomai apmokestinta pagal pristatymo vietą arba kiekį. Dėl tokių paslaugų maloniai prašome kreiptis į mus atskirai.

Būklė: naujas, Gamybos metai: 2010, Outreach 235 mm Column diameter 60 mm Table size 290 x 290 mm Motor power 1 kW Speed 50 - 4000 rpm Machine weight approx. 72 kg OPTIMUM Bench Drill OPTIdrill DX 17V - Column diameter 60 mm Product length approx. 425 mm - Product width/depth approx. 481 mm Product height approx. 910 mm Drilling capacity - Drilling capacity steel (S235JR) 16 mm Continuous drilling capacity steel (S235JR) 13 mm - Thread cutting steel (S235JR) M8 Drill table - Drill table working area length 290 mm Drill table working area width 290 mm - Drill table T-slot size 10 mm Drill table T-slot number 2 - Drill table T-slot spacing 100 mm Distance chuck - drill table min. 98 mm - Distance chuck - drill table max. 315 mm Speed range - Speed range 50 - 4000 min⁻¹ Speed regulation electronically adjustable Electrical data - Drive motor power 1.0 kW Connection voltage 230 V - Mains frequency 50 Hz Machine base - Distance chuck - machine base min. 0 mm - Distance chuck - machine base max. 385 mm - Machine base working area length 290 mm Machine base working area width 280 mm - Machine base T-slot size 14 mm Machine base T-slot number 2 - Machine base T-slot spacing 100 mm Standards and approvals - Standard DIN EN 55011 EMC class C2 Spindle - Quill stroke 60 mm Spindle taper MT 2 - Outreach 235 mm Packing dimensions: - Length 540 mm - Width 420 mm - Height 1,040 mm - Gross weight 87 kg - Net weight 72 kg Iodpfx Abew Spc Rjvetg Order No.: 3020170 New machine from year of manufacture 2010 in original packaging Bench drill OPTIdrill DX 17V with infinitely variable speed control. Machine highlight – the menu-driven operation for drilling/tapping modes. Description: - Optimum power transmission via aluminum belt pulleys - Emergency stop pushbutton - Drill spindle with precision ball bearings - Guaranteed concentricity accuracy less than 0.03 mm measured at the drill spindle - Dirt- and water-resistant, easy-to-clean membrane keypad with high-contrast OLED display - Glare-free LED lighting on the left and right integrated into the drill head. No disruptive shadows - Tapping mode - Language selection in the display panel: DE-EN-FR-RU - Digital reference point - Digital part counter - Audible signal when drilling depth is reached - Reduced speed in tapping mode - Height-adjustable chuck guard with microswitch for maximum protection - Precision-machined drill table with parallel T-slots, precision surface-finished - Swiveling drill table - Massive base plate with parallel T-slots Features: For drilling and tapping, the machine automatically sets the optimum speed for the tool after the user specifies the drill diameter and material.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, As-new polishing machine OPTIMUM OPTIpolish GZ40P with Vario conversion, Siemens inverter, and cyclone extraction system. Suitable for polishing wheels with a diameter of up to 350mm, max. wheel width 35mm, wheel bore 20mm. Designed for continuous and intensive industrial use Heavy-duty industrial polishing machine: - The high net weight effectively absorbs the already minimal vibrations - Maintenance-free, durable induction motor for smooth operation - Robust cast iron housing Itedpfx Aoyglkyebvjg Additional features: - Variable drive with Siemens Sinamics V20 inverter - Adjustable circumferential speed: 34 m/s down to 6 m/s - Sturdy base with cyclone extraction integrated into the base, saving space and sound-insulated The base must be filled with concrete by the customer. Automatic start/stop: When the external device is switched on or off, the extraction system starts or stops automatically with a delay of 2-3 seconds. Separate operation of the extraction system is no longer necessary: in accordance with hazardous substances regulations, residual dust is extracted after the machine is turned off. The machine is located at our facility in 71334 Waiblingen-Beinstein and is available for inspection. Please contact us for more information.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, High-quality spindle with precision tapered roller bearings Hardened and ground table guideways Turcite-B coated counter-guides for high wear resistance and low friction Integrated grinding wheel dresser Machine base made of robust, torsion-resistant cast iron for maximum rigidity and stability Zero-backlash V-flat guide on the Z-axis, flat guideways on the X and Y axes Trapezoidal thread leadscrew on Y-axis Manual central lubrication All flat guideways are finely scraped, ensuring high precision of all manual movements LED lamp Safety electrical system operating at 24 V DC Grinding accuracy: 0.005 mm Corundum grinding wheel, grit 46, for all common steels included in standard delivery Dual-channel safety electrical system EMC filter class Significant energy savings with IE3 motor Coolant system with external coolant tank Dimensions and Weights Length approx. 1970 mm Width/Depth approx. 1300 mm Height approx. 1700 mm Weight approx. 850 kg Electrical Data Drive motor power: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Surface Grinding Table Clamping area length: 200 mm Clamping area width: 500 mm Grinding Wheel(s) Outer diameter: 200 mm Width: 20 mm Bore: 31.75 mm Peripheral speed: 33 m/s Itjdpfx Asw Eay Iobvjg Spindle Speed: 2850 rpm Run-out accuracy: 0.005 mm X-Axis Feed rate: Manual

Būklė: naudotas, Gamybos metai: 2024, Optimum Optisaw SD500AV – Variable Band Saw with Siemens Inverter Used bandsaw with signs of use - Heavy-duty industrial design - Quiet operation - Manual or semi-automatic operation - Infinitely variable bandsaw speed from 20–80 m/min - High cutting precision due to vibration-free running - Mitre adjustment from -45° to +60° by swiveling the entire saw frame - Supplied as standard with high-quality bi-metal saw blade - Microswitch for automatic shut-off - Coolant pump - Ball-bearing saw blade guides with carbide inserts for optimal cutting results - Easy adjustment of lowering speed via feed control valve on the control panel - Large, hydraulically quick-release vice, self-closing, laterally adjustable - Manometer for accurate saw blade tensioning - Clear, user-friendly control panel Isdpfx Aox Dzv Eebvstg Semi-automatic operation procedure: - Closing the vice and starting the motor - Lowering of saw frame for cutting - Stopping the motor and returning saw frame to starting position Dimensions and Weights Length approx.: 2129 mm Width/depth approx.: 1046 mm Height approx.: 1687 mm Weight approx.: 645 kg Electrical Data Output power (motor): 3 kW Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 0.1 kW Total connected load: 3.8 kW Operating voltage: 400 V Mains frequency: 50 Hz Machine Data Saw blade speed: 20–80 m/min Saw blade length: 3770 mm Saw blade width: 34 mm Saw blade thickness: 1.1 mm Cutting angle range: -45° to +60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Continuous real-time data generation: Yes Data storage location: On the device Data access: Via wireless interfaces Cutting Capacities 0° round (solid material): 355 mm 0° square (solid material): 300 mm 0° rectangle vertical (solid material): 300 x 490 mm -45° round (solid material): 290 mm -45° square (solid material): 250 mm -45° rectangle vertical (solid material): 250 x 250 mm +45° round (solid material): 350 mm +45° square (solid material): 290 mm +45° rectangle vertical (solid material): 290 x 340 mm +60° round (solid material): 230 mm +60° square (solid material): 180 mm +60° rectangle vertical (solid material): 180 x 220 mm Note on cutting range: The cutting range is determined based on the weight of the saw frame when cutting aluminum. It may vary when processing different materials and may in some cases be reduced (not to be confused with cutting capacity).

Būklė: naudotas, Gamybos metai: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH, traces of use present - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 8 - Precisely machined carriage - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - All guides adjustable via gib strips - Shafts, gears, and main spindle running in oil bath - Cross-slide adjustment range ± 90° - Guaranteed spindle nose run-out accuracy better than 0.015 mm - Easy-running, hardened and ground gearbox gears mounted in 2 adjustable precision taper roller bearings - Clearly arranged selection levers for feed speed adjustment - Enclosed design of the quick-shift feed gearbox - Gears and shafts hardened and ground, running in precision bearings in an oil bath - Switch with life-cycle calculation, tested according to EN ISO 13849 - Bed carriage forward/reverse operation switchable via control spindle - Central lubrication in bed carriage - Leadscrew cover - Emergency stop impact switch, motor protection switch, lockable main switch - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Quick, easy, and tool-free adjustment via clamping lever - Heavily ribbed prism bed, induction hardened and precision ground, made from cast iron - Coolant system with separate coolant tank featuring fill level indicator and oil separator; easy and complete draining and cleaning per DIN - LED machine lamp in chip guard - Two gearbox speed ranges - Spindle bore / bar capacity Ø 105 mm - Siemens Sinamics frequency inverter / Safety Integrated - Energy chain for protective cable and hose routing - Thread dial indicator scale adjustable - Quick-change tool post SWH 7-C - 1 tool holder 32 x 150 type D for 25 mm square tool bits - Digital position display DPA 21 - Glass scales Dimensions and weights Length approx. 3450 mm Width/depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working ranges Centre height: 280 mm Centre distance: 1910 mm Swing diameter over bed: 560 mm Swing diameter in bed gap: 790 mm Swing diameter over cross-slide: 355 mm Turning length in bed gap: 170 mm Bed width: 350 mm Speed range Number of speed ranges: 2 Speed range: 25 – 1600 rpm Spindle speed control: electronically adjustable Electrical data Output power (motor): 7.5 kW Total connected load: 8.5 kW Connection voltage: 400 V Network frequency: 50 Hz Coolant system Coolant pump power: 125 W Standards and approvals Ijdpfx Asx Dzxajbvetg Standard: DIN EN 55011 Tailstock Quill taper: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Tool post mounting height max.: 25 mm Spindle taper: Ø 113 (taper 1:20) mm Thread cutting Metric pitch: 0.1 - 14 mm/rev Number of metric pitches: 47 Inch pitch: 112 - 2 TPI Number of inch pitches: 60 Diametral pitch: 4 – 112 DP Number of diametral pitches: 50 Module thread pitch: 0.1 - 7 mm/rev Number of module thread pitches: 34 Travels Compound slide travel: 130 mm Cross-slide travel: 316 mm Bed carriage travel: 1710 mm Feed range Longitudinal feed: 0.031 - 1.7 mm/rev Number of longitudinal feeds: 42 Plan feed range: 0.014 - 0.784 mm/rev Number of plan feeds: 42

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Optimum OPTIdrill RD 6 High-precision, robust radial drilling machines in top quality. Ideal for flexible use in both single-part and series production. • Versatile applications such as drilling, reaming, and thread cutting • Electrically braked motor • 24V DC electrics and dual-channel safety circuit according to DIN EN 12717 • Heavy-duty, high-quality cast construction • Large reach thanks to horizontally adjustable machine head • Ergonomically arranged control panel • Smooth-operating swivel and travel axes • Sophisticated column swiveling with optimized clamping for maximum stability with minimal clamping offset • Rigid, torque-resistant arm design • Height adjustment of the arm via powerful motorized drive and lead screw • Drill head gearbox runs in oil bath • Arm guideways are hardened and precision-ground • Gearbox gears made from case-hardened and precision-ground chrome-nickel steel for quiet and smooth operation • Drill head and column can be clamped or released together or separately • Forward and reverse operation • Large, heavy-duty and precise drill table • Hardened and ground clamping table with parallel T-slots • Machine lamp • Overload protection • Thick-walled cast column ensures high smoothness and stability • LED lamp • Coolant system with integrated coolant tank in machine base RD 6 / RD 7 • Column is hydraulically clamped Dimensions and Weights Column diameter: 320 mm Length (approx.): 2670 mm Width/Depth (approx.): 1120 mm Height (approx.): 2760 mm Weight (approx.): 3200 kg Arm Swivel angle: 180° Drilling Capacity Max drilling capacity in steel (S235JR): 50 mm Continuous drilling capacity in steel (S235JR): 45 mm Drill Table T-slot size: 14 mm Number of T-slots: 4 T-slot spacing: 180 mm Max. distance spindle to drill table: 1420 mm Clamping table length: 630 mm Clamping table width: 500 mm Clamping table height: 500 mm Clamping table T-slot size: 22 mm Clamping table T-slot number: 3 Clamping table T-slot spacing: 150 mm Min. distance spindle to clamping table: 0 mm Max. distance spindle to clamping table: 910 mm Min. distance spindle to drill table: 465 mm Itedewa Tc Sopfx Abvjg Speed Range Speed range: 44 – 1023 rpm Number of speed steps: 12 Electrical Data Total connected load: 6.5 kW Mains voltage: 400 V Mains frequency: 50 Hz Machine Base Working surface length: 2550 mm Working surface width: 970 mm Motor(s) Spindle motor output: 4 kW Arm lift motor output: 1.5 kW Coolant pump drive motor output: 90 W Hydraulic clamping drive output: 0.75 kW Spindle Quill stroke: 270 mm Spindle taper: MT5 Quill feed rate: 0.06 – 0.2 mm/rev Quill feed speed stages: 3 Travels Drill head travel (horizontal): 1250 mm Arm lift travel (vertical): 680 mm Max. distance spindle to column: 1600 mm Min. distance spindle to column: 350 mm

Būklė: naudotas, Gamybos metai: 2023, Optimum Optiturn TX 5216V – used machine. Itedsx Hdq Tepfx Abveg Machine Features: - Machine bed made of heavily ribbed cast iron - One-piece machine base made of steel - High rigidity of the headstock housing thanks to heavily ribbed 25GG cast iron - Precisely machined carriage - Shafts on needle bearings, all components lubricated in an oil bath - Bed guides hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made of hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with life cycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed rod cover - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures outstanding accuracy and durability - High cutting performance allows for substantial material removal during roughing operations - Energy chain for gentle cable and hose management - Lockable chip guard travels with the carriage, featuring integrated position display and coolant hose, manually adjustable - No change gears required - Equipped with safety mechanism to prevent simultaneous operation of threading and feed mechanisms - Electronic feed cut-off for Z-axis - Coolant system with separate coolant tank with level indicator and oil separator; easy and complete draining and cleaning according to DIN standard - Electric position cut-off with four-way stop - Three-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 Type D for 25 mm square tool - Large spindle bore Dimensions and Weights: - Length approx.: 2,925 mm - Width/depth approx.: 1,195 mm - Height approx.: 1,930 mm - Weight approx.: 2,470 kg Working Area: - Centre height: 260 mm - Centre distance: 1,600 mm - Swing over bed: 520 mm - Swing over cross slide: 324 mm - Bed width: 350 mm Spindle Speeds: - Number of speed ranges: 2 x 3 steps - Speed range: 12 – 1,800 rpm Electrical Data: - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Coolant System: - Coolant pump power: 60 W Data Type Generated: Utilization data Tailstock: - Taper: MK 5 - Quill travel: 180 mm - Quill diameter: 72 mm Spindle: - Spindle nose: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar capacity diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Thread Cutting: - Metric pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Imperial pitch: 60 – 2 TPI - Number of imperial pitches: 55 - Diametral pitch: 120 – 4 DP - Number of diametral pitches: 55 - Module threads: 0.25 – 7.5 mm x π - Number of module threads: 55 Travel: - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1,400 mm Feed: - Longitudinal feed range: 0.05 – 1.5 mm/rev - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Būklė: naudotas, Gamybos metai: 2017, Frezaus staklė Optimum Optimil F 105 Iodpoyphnyjfx Abvjtg

Gamybos metai: 2017, būklė: paruoštas naudoti (naudotas), Parduodama beveik nauja OptiMill MF 4V frezavimo staklės, vos 100 valandų darbo. Pagaminimo metai: 2017. X/Y/Z eiga: 800mm/320mm/400mm. Begalinis veleno sūkiai: 9–6750 aps./min., 8 sūkių diapazonuose, su elektroniniu reguliavimu. Pinolės eiga: 127mm. 3 ašių skaitmeninis indikatorius DPA21, sukimosi krypties jungiklis dešinė/kairė, gręžimo gylio ribotuvas. Kryžminis stalas X/Y: 1244mm/230mm, T-griovelis 16mm. Griebtuvų apsauga, aušinimo sistema, rankinė centrinė tepimo sistema, universalus suspausto oro įrankių laikymo sistema ISO 40, begaliniai stalo pastūmos X/Y kryptimis. Svoris apie 1200kg. Apžiūrėti galima susitarus. Itodpfx Absxyk Ucjvog

Gamybos metai: 2016, būklė: paruoštas naudoti (naudotas), Parduodama beveik nenaudota Optimum paviršinio šlifavimo staklė. Šlifavimo plotis: 220 mm, šlifavimo ilgis: 470 mm, šlifavimo aukštis: 350 mm, stalo matmenys X/Y: 210 mm/450 mm, didžiausias atstumas tarp stalo ir veleno centro: 450 mm, šlifavimo disko matmenys X/Y/Z: 200 mm/13 mm/31,75 mm. Staklių matmenys X/Y/Z: apie 1200 mm/1450 mm/2000 mm, svoris: apie 800 kg. Yra dokumentacija. Galima apžiūra vietoje. Iedsxx Udlepfx Abvstg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, Pjovimo skersmuo 128 mm Ijdpfexbh Hfsx Abvotg Juostinio pjūklo ilgis / mm Stalo aukštis / mm

Būklė: naujas, Swing diameter: 360 mm Turning length: 1000 mm Swing diameter over bed slide: 360 mm Centre height: 180 mm Spindle speed: 70-2400 rpm Total power requirement: 2.2 kW Machine weight: approx. 680 kg Overall dimensions: approx. 2000x1500x900 mm Equipment: -Hardened and ground Z-axis guideway -Guaranteed spindle nose runout accuracy = 0.015 mm -Spindle mount Camlock DIN ISO 702-2 No. 5 -Motor protection switch -Main motor with electric brake -Right/left-hand rotation can be switched at the bed slide -Dual-channel safety electronics -Switch tested with lifecycle calculation according to EN ISO 13849 -Perfectly true-running main spindle ensures high load capacity via mounted precision taper roller bearings -Safety device prevents simultaneous operation of threading and feed mechanisms -Safety handwheels with disengagement function on X and Z axes -All gears in the feed gearbox are made of steel, hardened and ground -Shafts mounted on needle bearings, all components lubricated in an oil bath -Easy feed operation control -One change gear position -Control cabinet with Optimum control -Coolant pump with coolant tank and fill-level indicator. Tank removable for easy cleaning -LED machine lamp built into the machine housing -Sturdy steel machine base -Emergency stop mushroom switch left and right -Lockable main switch Special accessories: Itjdpfxsw U U Tmj Abvog Includes 3-jaw chuck Includes quick-change tool holder

Būklė: naujas, Swing diameter: 420 mm Turning length: 1,500 mm Swing diameter over cross slide: 250 mm Swing diameter in bed gap: 590 mm Center height: 210 mm Turning length in bed gap: 260 mm Spindle speeds: 16 (45-1,800) rpm Tailstock taper: MT 4 Quill stroke: 120 mm Quill diameter: 50 mm Spindle nose: DIN ISO 702-2 No. 6 Spindle bore: 52 mm Spindle taper: MT 6 Longitudinal feed: 17 / 0.05 - 1.7 m/min Cross feed: 17 / 0.025 - 0.85 m/min Total power requirement: 4.6 kW Machine weight approx. 1,340 kg Space requirement approx. 2,440 x 915 x 1,375 mm Isdpfjk Egrpjx Abvotg Fully equipped lead- and feed-screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mounting Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduations 0.04 / 0.02 mm - Four-way tool post - All guides adjustable via gib strips - Compound slide travel range ±90° - Guaranteed spindle nose runout accuracy better than 0.015 mm - Main spindle runs in oil bath - Gearwheels smoothly running, hardened and ground, supported by two adjustable precision tapered roller bearings - Handwheels decoupled and tested in accordance with EN 23125 - Two-channel forward/reverse switch tested according to EN 23125 - Switches with lifecycle calculation, tested according to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI selectable via control levers without changing gears - Forward/reverse switchable on bed slide via leadscrew - Central lubrication on bed slide - Base and machine bed cast in one piece from Meehanite casting - Leadscrew cover - Emergency stop device with foot pedal - Safety handwheels with disengagement function on X and Z axes - Tailstock adjustable by ±10 mm for taper turning - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment via clamping lever - Deep-ribbed prism bed, induction hardened and precision ground from grey cast iron - Coolant system with separate coolant tank, level indicator and oil separator; easy and complete draining and cleaning according to DIN - LED machine lamp in chip guard Models TH 4210D and TH 4215D with digital position indicator DPA21: - User-friendly membrane keypad, splash proof, sealed and anti-glare - Glass scales Scope of delivery: - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MT 6 / MT 4 - Fixed center MT 4 - Change gear set - Position stop with fine adjustment - Initial fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw chuck, centrically clamping, Ø 250 mm Quick-change tool post SWH5-B set

Būklė: naujas, Swing diameter: 560 mm Turning length: 1910 mm Swing diameter over cross slide: 355 mm Swing diameter in bed gap: 790 mm Centre height: 280 mm Turning length in bed gap: 170 mm Spindle speeds: 12 (25–1600) rpm Tailstock taper: MT 5 Quill stroke: 180 mm Quill diameter: 75 mm Spindle mount: DIN ISO 702-2 No. 8 Spindle bore: 80 mm Spindle taper: MT 7 Longitudinal feed: 35 / 0.059 – 1.646 m/min Face feed: 35 / 0.020 – 0.573 m/min Total power requirement: 8.5 kW Machine weight: approx. 2560 kg Space requirement: approx. 3450 x 1150 x 1650 mm Item no. 3462170 Heavy-duty lathe distinguished by high flexibility, precision, and cost-effectiveness. Equipped with DPA 31 Plus digital position display and quick-change tool post. Isdpfx Absucgr Isvstg Description: - Hardened and ground Z-axis guideway - Guaranteed spindle nose runout accuracy = 0.015 mm - Spindle mount Camlock DIN ISO 702-2 No. 8 - Leadscrew cover - Precisely machined cross slide - All guideways adjustable via gib strips - Forward/reverse operation on cross slide via shift spindle - Dual-channel safety electronics - Central lubrication in cross slide - Compound rest swivelling range ±90° - Main spindle runs in oil bath - Shafts and gears run in oil bath - Gear wheels easy-running, hardened, ground, with two adjustable precision tapered roller bearings - Switch with life cycle calculation, tested to EN ISO 13849 - Handwheels with adjustable fine calibration 0.04 / 0.02 mm - Safety handwheels with disengagement function to EN23125 on X and Z axes - Gears and shafts hardened and ground, running in oil bath on precision bearings - Clearly arranged selection levers for feed speed adjustment - Enclosed rapid-change feed gearbox - Emergency stop punch button, motor protection switch, lockable main switch - Emergency stop foot pedal - Tailstock offset for taper turning ±10 mm - Tailstock quill and handwheel with adjustable fine calibration 0.025 mm; quick, simple, and tool-free adjustment via clamping lever - Energy chain for gentle cable and hose guidance - Heavily ribbed, induction-hardened, and precision-ground grey cast iron prism bed - Coolant system with separate tank, fill level indicator, and oil separator; easy, complete draining and cleaning per DIN - Adjustable leadscrew dial scale Scope of supply: - Fixed steady rest, max. passage Ø 165 mm - Travelling steady rest, max. passage Ø 95 mm - LED machine lamp - TH 5615D-TH 5630D: Reducing sleeve MT 7/MT 5 - TH 5620V: Reducing sleeve Ø113 mm / MT 5 - Fixed centre MT 5 - Fixed and revolving centre MT 5 - Quick-change tool post 7-C - Tool holder 32 x 150 Type D for square tools - Thread dial indicator - Initial machine fill with quality oil - Change gear set - Operating tools Special accessories included: - OPTIMUM 3-jaw chuck, centric clamping, Ø315 mm, Camlock DIN ISO 702-2 No. 8 (Item no. 3442768)

Būklė: naujas, Gamybos metai: 2025, x-axis travel 580 mm y-axis travel 200 mm z-axis travel 340 mm Spindle speeds 115 - 1750 rpm Table size 1000 x 240 mm Tool holder ISO 40 Total power requirement 4.5 kW Machine weight approx. 820 kg Space requirement approx. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling operations, featuring a digital 3-axis position display DPA 31 Plus Description: - Heavy, robust design made from high-quality, vibration-absorbing cast iron - Oil-bath gearbox with ground and hardened gears - Coolant system - Halogen machine lamp with focused beam - Large, heavy-duty precision cross table, ground surface, with T-slots and adjustable gib strips Itedpfstv Riasx Abvjg - Milling head tiltable ± 45° - Clockwise/counterclockwise rotation - X-axis movement selectable via handwheel or table feed unit - Automatic end-stop for the X-axis - Height-adjustable safety screen with microswitch, shielding against flying chips and parts for maximum operator protection Scope of delivery: - Keyed drill chuck 1 - 16 mm / B18 - Drill chuck arbor ISO40 / B18 - Horizontal milling spindle with counter bearing, arbor for slitting saws Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Drawbars for vertical and horizontal operation - T-slot nuts - Drift key - Operating tools

Būklė: beveik kaip naujas (parodų įrenginys), Super practical heavy-duty table, good quality Welding positioner with 100 kg load capacity Max. load: 100 kg horizontal Max. load: 50 kg vertical Rotation speed: approx. 1–7 rpm Rotation direction: left and right Iedj Ugnbopfx Abvjtg Turntable speed: manually adjustable Turntable diameter: 345 mm Turntable height: 415 mm Turntable tilt angle: 0–90° Motor power in operation: 0.12 kW Dimensions: 500 x 470 x 415 mm Power supply: AC 110V / 220V 50/60Hz Optional with chuck / quick-release chuck for an extra €180 Free delivery: €90

Būklė: geras (naudotas), Super practical heavy-duty table, high quality Itjdpfx Aecctnaebvog Welding positioner with 100 kg load capacity Max. load: 100 kg horizontal Max. load: 50 kg vertical Rotation speed: 0.5-9 rpm Rotation direction: left and right Turntable speed: manually adjustable Turntable diameter: 345 mm Turntable height: 415 mm Turntable tilt angle: 0-90° Motor power during operation: 0.12 kW Dimensions: 500 x 470 x 415 mm Power supply: AC 110V / 220V 50/60Hz Optional chuck available – surcharge €160 Free delivery – €80

Būklė: naujas, Gamybos metai: 2025, For information on delivery times and current daily prices, please contact us directly. Ijdpfx Abjq T R Aaovotg Dimensions and Weights: Length (product): approx. 1760 mm Width/Depth (product): approx. 745 mm Height (product): approx. 1320 mm Weight (net): approx. 469 kg Max. height (product): approx. 1590 mm (DPA) Working Areas: Centre height: 165 mm Centre distance: 1000 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 216 mm Bed width: 190 mm Speed Range: Number of speed ranges: 9 steps Speed range: 65 – 2000 rpm Electrical Data: Drive motor power: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 4 Spindle bore/bar capacity: diameter 38 mm Toolpost maximum mounting height: 16 mm Spindle taper: MK 5 Tailstock: Tailstock taper: MK 3 Tailstock quill stroke: 100 mm Tailstock quill diameter: 38 mm Threads: Metric thread pitch: 0.4 – 10 mm/rev Number of metric threads: 29 Imperial thread pitch: 56 – 4 TPI Travel: Cross slide travel: 90 mm Compound slide travel: 168 mm Bed slide travel: 850 mm Feed: Longitudinal feed range: 0.02 – 0.4 mm/rev Number of longitudinal feeds: 24 Cross feed range: 0.01 – 0.2 mm/rev Number of cross feeds: 32

Būklė: naujas, Gamybos metai: 2025, For up-to-date pricing and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 3265 mm Width/Depth (product): approx. 1065 mm Height (product): approx. 1550 mm Weight (net): approx. 1965 kg Itjdpfx Abjq Ukbpovjg Working Areas: Centre height: 230 mm Centre distance: 2060 mm Swing diameter over bed: 460 mm Swing diameter in gap: 690 mm Swing diameter over cross slide: 270 mm Turning length in gap: 240 mm Bed width: 300 mm Speed Range: Number of speed ranges: 12 Speed range: 25 – 2000 rpm Electrical Data: Main drive motor power: 5.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant system Coolant pump power: 125 W Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar capacity diameter: 58 mm Max. tool holder height: 25 mm Spindle taper: MT 6 Tailstock: Tailstock taper: MT 4 Tailstock quill travel: 130 mm Tailstock quill diameter: 60 mm Thread Leads: Metric pitch: 0.1 – 14 mm/rev Number of metric threads: 41 Inch pitch: 112 – 2 TPI Number of inch threads: 41 Diametral pitch: 4 – 112 DP Number of diametral threads: 50 Module pitch: 0.1 – 7 mm/rev Number of module threads: 34 Travels: Cross slide travel: 125 mm Compound slide travel: 285 mm Bed carriage travel: 1805 mm Feeds: Longitudinal feed range: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed range: 0.014 – 0.784 mm/rev Number of cross feeds: 42 Electrical Connection: Total connected load: 5.8 kW