Lvd Electra Fl3015 pirkti naudotą (537)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising Unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, opening: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Max. daylight: 1150 mm Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection rate: 334 cm³/s Hjdpfxjw U Rcdo Aa Der Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Electro-hydraulic equipment Pump motor power: 45 kW Heater power: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke according to Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Krauss Maffei KM 350-2700 C2+ Injection Moulding Machine Year of manufacture: 2004 System: Fully hydraulic Control system: MC4, colour monitor, integrated control panel, built-in disk drive 2. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasive protection Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 3500 kN Mould opening force: 220 kN Moving platen traverse force: - Opening: 105 kN - Closing: 95 kN Platen dimensions (H × V): 1060 × 1095 mm Tie bar spacing (H × V): 710 × 710 mm Mould opening stroke: 920 mm Mould height installation: 380 mm Daylight: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Output at standard speed: 108 g/s Output at increased speed: 141 g/s Hodpfx Aox Eluksa Djr Electro-hydraulic Equipment Pump motor power: 75 kW Installed heater power: 36 kW Number of cylinder heating zones: 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and Weight Net weight (with control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Būklė: geras (naudotas), Gamybos metai: 2015, Cutting range 300 mm Cutting range at 90 degrees: flat 330 x 260 mm Cutting range at 90 degrees: square 260 x 260 mm Cutting range at 45 degrees: round 260 mm Cutting range at 45 degrees: flat 270 x 200 mm Cutting range at 45 degrees: square 250 mm Cutting range at 60 degrees: round 180 mm Cutting range at 60 degrees: flat 170 x 170 mm Cutting range at 60 degrees: square 180 mm Automatic feed 9,999.9 mm Minimum feed 2.0 mm Minimum cutting diameter 5.0 mm Band speed 15 – 100 m/min Vice, opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Hodpfsy I Da Rjx Aa Dsr Control MEP CNC Total power requirement 2.2 kW Weight 1240 kg Dimensions (L x W x H) 1800 x 1900 x 1750 mm Current list price approx. €23,000 Special price on request Equipment: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) - With additional semi-automatic function, for cuts from 0° to 60° to the left - WINDOWS “CE” based MEP 50 control and 7” touch-screen display * Simple and fast setup of all machine parameters * With additional soft keys and backlit display * 10 programs, each with a maximum of 9,999 pieces and max. 9,999.9 mm in length - Material feed with stepper motor via ball screw spindle * Single stroke 600 mm repeatable for cutting any length * Accuracy of ±0.1/600 mm - Feeder with guard cover and safety limit switch - Precise adjustment of feed rate displayed in mm/min - Positioning of saw head and movement of feeder via joystick - Automatic detection of cutting start - Large, adjustable cast steel band pulleys - Blade tensioning with tension monitoring and display readout - Carbide blade guides for maximum cutting precision - Automatic monitoring of cutting load - Quick-adjust vice * With interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant tank * Equipped with 2 electric pumps for saw blade lubrication and cooling * Coolant gun for cleaning the machine - Chip removal brush for cleaning the blade - Operating manual in German Manufacturer information: When installing this saw into a mains system with a residual current circuit breaker (RCCB), this must be all-current sensitive and not less than 300 mA.

Būklė: labai geros būklės (naudotas), I am offering a used hydraulic press from the renowned brand Obolith, designed for manufacturing concrete elements such as hollow blocks, blocks, bricks, etc. Technical specifications: - Manufacturer: Obolith - Type: Hydraulic press / vibropress - Drive: Electro-hydraulic - Condition: Used, fully operational - Power supply: 400V - Robust, steel construction - Built-in mould (can be exchanged for another) - Control panel with emergency stop switch - The machine can be tested on site Hsdpfx Aewpxynja Der

Būklė: labai geros būklės (naudotas), For sale: stone or granite splitter. - Regularly serviced, no leaks, in very good condition. Hodpfx Aaewpxzfe Dor Available for sale: Obolith Steinwerke GmbH – semi-automatic press with roller conveyor I offer a more advanced hydraulic press with automatic offloading via a roller conveyor, ideal for serial production of concrete prefabricated elements. Specifications: • Manufacturer: Obolith Steinwerke GmbH • Model: With roller conveyor • Company slogan: “Stein-reich an Ideen” • Foot operation (start pedal) • Emergency stop switch and external control panel • Electro-hydraulic drive • Heavy-duty frame, designed for intensive use Ideal for automating production processes of blocks, hollow bricks, kerbstones.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Sheet width: 1050 mm Sheet thickness: 2.0 mm Roll length: 1070 mm Roller diameter (top): 75.0 mm Motor power: 1.5 kW Weight: 325 kg Dimensions (LxWxH): 1530 x 700 x 1160 mm Demo machine - LIKE NEW Hodpfx Aaoxacbuo Dor Never used (!!) Special price on request Features: - Electro-mechanical 3-roll plate bending machine - Asymmetric roll arrangement - 2 driven rollers with brake motor - Manual swing bearing for quick removal of the workpiece - Wire grooves on lower and rear rolls - Double foot switch for left/right operation incl. emergency stop button - Rear roll adjustment with notched lever - Electrical safety device

Būklė: naujas, Pressure: 40.0 t Stroke: 285 mm Flat bar on the high edge: 250 x 24 mm Working speed: 10.0 mm/sec Return speed: 10.0 mm/min Working height: 930 mm Table: 660 x 1250 mm Total power requirement: 4.0 kW Motor: 400 Volt 50 Hz Oil capacity: 40.0 l Weight: 800 kg Dimensions (LxWxH): 1450 x 800 x 1300 mm Equipment: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine constructed from hardened and ground forged steel - Digital display for stroke adjustment * Programming of 1x bending endpoint & 1x retraction point possible - 1x tool set (1x bending punch / 1x single V-die) Hedpfx Aasxabhmj Djr * Bending punch: Angle 60° / bending radius: 5.0 mm * Die: Angle 60° / V opening: 63.0 mm - Infinitely variable adjustment of bending speed and pressing force - 1x manual material stop - Mobile double foot switch - Machine can be transported with pallet truck/forklift - Operating manual

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Sheet width: 1250 mm Sheet thickness: 1.5 mm Roll length: 1270 mm Top roll diameter: 75.0 mm Motor power: 1.5 kW Weight: 400 kg Dimensions (LxWxH): 1730 x 700 x 1160 mm Showroom machine – as NEW Never used (!!) Special price upon request Features: - Electro-mechanical 3-roll plate bending machine - Asymmetric roll arrangement - 2 driven rolls with brake motor - Manual swing-out bearing for quick removal of the workpiece - Wire grooves on the bottom and rear rolls Hjdpjxaafdsfx Aa Dor - Double foot switch for left/right operation including emergency stop button - Rear roll adjustment with notched lever - Electrical safety device

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, Pressure: 135 t Bending length: 3050 mm Frame gap: 2550 mm Installation height: 320 - 560 mm Stroke: 240 mm Working speed: 10.0 mm/sec Return speed: 150 mm/sec Throat depth: 400 mm Working height: 1050 mm Control system: DNC 1200 PS/B Operating pressure max.: 297 bar Compressed air: 4.5 - 6.0 bar Connected load: 15.0 kW Oil capacity: 250 l Weight: 11,500 kg Dimensions L-W-H: 5240 x 2400 x 2900 mm Good / well-maintained condition (!!) Previously used in aluminium processing Hedpex Ik D Aofx Aa Djr - in checked condition - machine video - ?v=z-Bxibk_8uE Equipment: - CNC electro-hydraulic press brake - CYBELEC CNC control system, model DNC 1200 PS/B * Serial No.: 0080 * Swiveling control panel, front right * Numeric programming * Tool and program library - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC electro-motorized backgauge (X axis) * with 3x manually adjustable stop fingers (Z axis) * Travel speed max. 250 mm/sec - CNC electro-motorized backgauge height adjustment (R axis) * Travel speed max. 100 mm/sec - CNC lower table crowning - CNC pneumatic die shifting (I axis) - Pneumatic upper tool clamping - Pneumatic lower tool clamping - Rear safety guard, incl. swiveling door - 2x side guards - incl. LAZER SAFE safety device – front - 2x stable front support arms with "sliding system" - Original EHT segmented upper and lower tooling - 1x movable two-hand/foot switch - Circuit diagram + hydraulic diagram

Būklė: naujas, Pressure: 20.0 t Stroke: 185 mm Flat bar on edge: 200 x 12 mm Working speed: 10.0 mm/sec Return speed: 10.0 mm/min Hedsxabtvspfx Aa Djr Working height: 930 mm Table dimensions: 480 x 1060 mm Total power requirement: 2.2 kW Motor: 400 Volt, 50 Hz Oil capacity: 12.0 l Weight: 530 kg Dimensions (L x W x H): 1150 x 480 x 1400 mm Equipment: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1 bending endpoint & 1 return point possible - 1 tool set (1 bending punch / 1 single-V die) * Bending punch ... angle: 60° / bending radius: 5.0 mm * Die ... angle: 60° / V opening: 63.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1 manual material stop - Freely movable double foot switch - Machine can be moved with pallet truck/forklift - Operating manual

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2010, Performance: 180 - 300 kg/h Briquette diameter: 50 mm Hopper capacity: 0.3 m³ Lubrication pump: 1.0 kW Motor power: 15 kW Demonstration machine with few operating hours - Automatic press for briquetting wood shavings and other waste materials - Pressure oil lubrication for the heavily loaded moving components Hodpfx Aexy S E Nsa Der - Hydraulic clamping cylinder at the press jaw to improve briquette quality - Electrical control for all operating processes - The press head can be heated or cooled during the briquetting process - Material requirements: Moisture content between 8 and 14 % Particle size between 1 and 12 mm Technical data: - Total connected load: approx. 22.0 kW - Pressure on piston: 2,000 - 2,500 kg/cm² - Vertical compression screw: 1.5 kW - Lubrication oil volume: 50 liters - Feed screw to compression screw: 0.75 kW - High-pressure pump: 0.55 kW Equipment: 1 Electric press head heater 1 Fan for press head cooling 1 V-type dosing hopper for briquetting press Heavy-duty steel construction Sight window incl. bridge breaker (driven together with the feed screw) Electro-mechanical level indicator 1 Cooling rail for briquettes L=4.0 m Briquette guidance by round bar Complete with supports

Būklė: beveik kaip naujas (naudotas), galia: 15,5 kW (21,07 AG), darbinė masė: 2 540 kg, Gamybos metai: 2023, veikimo valandos: 605 h, Įranga: griebtuvo hidraulika, hidraulika, hidraulinis kūjis, kabina, papildomi žibintai, reguliuojamas strėlė, Operating weight: 2,540 kg - Yanmar Stage V - Tier 4 Final diesel engine, 15.5 kW / 21.1 hp - 1105 cc, water-cooled - Hydraulic system: open center - Variable displacement hydraulic pump - Dozer blade - Tiltable cab with ROPS/TOPS/FOPS, equipped with heater, fan, loudspeaker, radio pre-wiring, and right/left rear-view mirrors - Joysticks with electro-hydraulic and proportional control commands for: • Boom swing • Main auxiliary circuit AUX1: single/double acting - Dual travel speed with "AUTO TWO SPEED" - Dipperstick: 1,350 mm - Height/width: 2,725 mm / 2,527 mm - Digging depth: 2,725 mm - Butterfly brackets on dipperstick - Rotating beacon - AUX 2 hydraulic pre-installation with low flow rate, controlled via potentiometer on left joystick (deactivates boom swing) - With Powertilt PT03: • Swing angle 180° (2x90°) Hedpstrmudefx Aa Der • Lehnhoff HS03 hydraulic quick coupler • Load hook on Powertilt, installed on right side Without digging bucket and grading bucket

Būklė: naujas, Gamybos metai: 2026, lazeri tipas: šviesolaidinis lazeris, lazerio galia: 6 000 W, FIBER CUT laser cutting machines offer a revolutionary solution in the laser cutting market. The innovative fiber laser technology enables much faster, more efficient, and cost-effective cutting of sheet metal components compared to CO2 lasers. These cutting machines are characterized by high speeds, productivity, and exceptional cutting accuracy, delivering unrivaled precision and repeatability. Our fiber lasers are primarily intended for processing the following materials: - Non-ferrous metals - Aluminum - Stainless steel - Carbon steel LASER SOURCE POWER 6000W Hodpfx Aaox Tphwo Djr CONSTRUCTION Our laser frame is designed and manufactured from the ground up in our own factory. The high-quality steel used in production is cut, welded, and precisely machined. The entire frame, gantry, and gantry arms feature additional ribbing, which provides high rigidity and eliminates vibrations and deformations. DRIVES Our machines are powered by Schneider AC servo motors with high resolution and power (Y1Y2 x 2000W, x 1500W, z 400W) to ensure optimal acceleration and speeds in each axis. Power transmission is achieved using high-quality planetary gearboxes. The X and Y axes utilize classic, proven helical racks, guaranteeing durability and precision. CUTTING HEAD The WSX liquid-cooled cutting head is designed for sheet metal processing. High-grade quartz glass lenses focus the laser beam onto the material, ensuring superior cutting accuracy. For consistent results, the HSU system automatically adjusts the head height to irregularities in the material. A protective window located between the nozzle and lens shields the lens assembly from molten metal splatter. LASER SOURCE The machine uses a Raycus Laser light source with high electro-optical conversion efficiency, low energy consumption, and excellent beam quality. This provides faster and more effective operation while reducing the likelihood of operator errors. The source is also resistant to back-reflection, ensuring no return beam to the laser. Stable power output guarantees efficient operation with minimal energy use. COOLING Industrial S&A CWFL dual-temperature chillers are specially designed for fiber laser cooling. They feature several alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm, and high/low temperature alarm. EXCHANGEABLE WORKTABLE The exchangeable worktable, located at the rear of the machine, almost completely eliminates laser downtime. Automatic table exchange takes just 10 seconds, allowing the operator to remove cut parts and load a new sheet while the laser works on the second table. This system ensures very high production continuity. AUTOMATIC LUBRICATION SYSTEM To maintain optimal machine condition, the racks and guides must be lubricated with oil every few days. The automatic lubrication system activates at preset intervals and delivers the correct amount, with all parameters set in the software.

Būklė: naujas, Gamybos metai: 2026, lazeri tipas: šviesolaidinis lazeris, lazerio galia: 6 000 W, FIBER CUT laser cutting machines offer a revolutionary solution in the laser cutting market. The innovative fiber laser technology enables much faster, more efficient, and cost-effective cutting of sheet metal components compared to CO2 lasers. These cutting machines are characterized by high speeds, productivity, and exceptional cutting accuracy, delivering unrivaled precision and repeatability. Our fiber lasers are primarily intended for processing the following materials: - Non-ferrous metals - Aluminum - Stainless steel - Carbon steel LASER SOURCE POWER 6000W CONSTRUCTION Our laser frame is designed and manufactured from the ground up in our own factory. The high-quality steel used in production is cut, welded, and precisely machined. The entire frame, gantry, and gantry arms feature additional ribbing, which provides high rigidity and eliminates vibrations and deformations. DRIVES Our machines are powered by Schneider AC servo motors with high resolution and power (Y1Y2 x 2000W, x 1500W, z 400W) to ensure optimal acceleration and speeds in each axis. Power transmission is achieved using high-quality planetary gearboxes. The X and Y axes utilize classic, proven helical racks, guaranteeing durability and precision. CUTTING HEAD The WSX liquid-cooled cutting head is designed for sheet metal processing. High-grade quartz glass lenses focus the laser beam onto the material, ensuring superior cutting accuracy. For consistent results, the HSU system automatically adjusts the head height to irregularities in the material. A protective window located between the nozzle and lens shields the lens assembly from molten metal splatter. LASER SOURCE The machine uses a Raycus Laser light source with high electro-optical conversion efficiency, low energy consumption, and excellent beam quality. This provides faster and more effective operation while reducing the likelihood of operator errors. The source is also resistant to back-reflection, ensuring no return beam to the laser. Stable power output guarantees efficient operation with minimal energy use. COOLING Industrial S&A CWFL dual-temperature chillers are specially designed for fiber laser cooling. They feature several alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm, and high/low temperature alarm. Hjdpfxsx Tn U Aj Aa Der EXCHANGEABLE WORKTABLE The exchangeable worktable, located at the rear of the machine, almost completely eliminates laser downtime. Automatic table exchange takes just 10 seconds, allowing the operator to remove cut parts and load a new sheet while the laser works on the second table. This system ensures very high production continuity. AUTOMATIC LUBRICATION SYSTEM To maintain optimal machine condition, the racks and guides must be lubricated with oil every few days. The automatic lubrication system activates at preset intervals and delivers the correct amount, with all parameters set in the software.

Būklė: naujas, Gamybos metai: 2026, lazeri tipas: šviesolaidinis lazeris, lazerio galia: 12 000 W, FIBER CUT laser cutting machines are a revolutionary solution in the laser cutting market. The innovative fiber laser technology enables much faster, more efficient, and cost-effective cutting of sheet metal compared to CO2 lasers. These machines feature high speeds, productivity, and exceptional cutting accuracy, providing unmatched precision and repeatability. Our fiber lasers are primarily designed for processing materials such as: - Non-ferrous metals - Aluminum - Stainless steel - Carbon steel LASER POWER SOURCE 12000W CONSTRUCTION The frame of our laser machine is designed and manufactured entirely in our factory. High-quality steel is used for production, which is cut, welded, and then precision-machined. The entire frame, gantry, and gantry arms are reinforced with additional ribbing to ensure high rigidity and to eliminate vibrations and deformations. DRIVES Our machines are equipped with high-resolution, high-power Schneider AC servo motors (Y1/Y2 x 2000W, X 1500W, Z 400W), ensuring proper acceleration and speeds in each axis. Power transmission is provided via high-grade planetary gearboxes. The X and Y axes utilize robust, proven helical racks that guarantee durability and precision. CUTTING HEAD Sheet metal cutting is performed using a water-cooled WSX cutting head. High-quality quartz glass lenses focus the dispersed laser beam onto the workpiece, ensuring precise cutting. The HSU system automatically adjusts the head height to compensate for material unevenness. A protective window between the nozzle and the lens safeguards the lens group from molten metal splatter. LASER SOURCE The machine is equipped with a Raycus Laser source, which offers high electro-optical conversion efficiency, low energy consumption, and a high-quality beam. This enables faster, more efficient operation and helps minimize operator errors. The laser source is resistant to back reflection, preventing beam return to the laser. Stable power delivery ensures effective performance with minimal energy use. COOLING Industrial-grade S&A CWFL dual-temperature chillers are specially designed for fiber laser cooling. They feature multiple alarm functions: compressor time delay protection, compressor overcurrent protection, water flow alarm, and high/low temperature alarms. EXCHANGEABLE WORKTABLE The exchangeable worktable, located at the rear of the machine, minimizes laser downtime. Automatic table exchange takes only 10 seconds. This allows the operator to remove cut parts and load new sheet material while the laser operates on the other table. This system ensures very high production efficiency. AUTOMATIC LUBRICATION SYSTEM Hjdpox Tpcbefx Aa Dsr To keep the machine in optimal condition, racks and linear guides must be lubricated with oil at least every few days. The automatic system activates lubrication at set intervals and in the proper amount, with all parameters adjustable via the control software.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, FIBER CUT laser cutting machines represent a revolutionary solution! Innovative fiber laser technology enables much faster, more efficient, and cost-effective cutting of sheet metal components compared to CO2 lasers. These machines are characterized by high cutting speeds, superior efficiency, and exceptional precision. They ensure unmatched accuracy and repeatability. Our fiber lasers are primarily designed for processing materials such as: - Non-ferrous metals - Aluminium - Stainless steel - Carbon steel CONSTRUCTION The frame of our laser is designed and manufactured in-house at our facility. The high-quality steel used in production is cut, welded, and then subjected to precision machining. The entire frame, gantry, and gantry arms are reinforced with additional ribbing to ensure high rigidity and eliminate vibrations and deformations. LASER SOURCE The machine utilizes a Raycus Laser light source with high electro-optical conversion efficiency, low energy consumption, and superior beam quality. This not only allows for faster and more effective operation, but also helps prevent operator errors. Furthermore, the laser source is resistant to backreflection effects (the return of the beam to the laser). Stable power output guarantees efficient operation with low energy consumption. AUTOMATIC LUBRICATION SYSTEM To maintain the machine in optimal condition, the racks and linear guides must be lubricated with oil at least every few days. The automatic system triggers lubrication at specified intervals and in the correct quantity; all parameters are set within the software. - Working area: 1500 x 3000 mm - Cutting head: NC30E - CYPCUT 2000E control system - Japanese SMG linear guideways - LEADRACK drive system - LEADSHINE BUS XY 750W servomotors - Shimpo reducer Hsdpfxouruyaj Aa Dsr - Raycus 3kW laser source (CE) - Extraction fan, provided as standard with computer

Būklė: naujas, Gamybos metai: 2026, lazeri tipas: šviesolaidinis lazeris, lazerio galia: 3 000 W, The FIBER CUT laser cutting machines are a revolutionary solution on the laser cutting market. Innovative fiber laser technology enables much faster, more efficient, and cost-effective sheet metal cutting compared to CO2 lasers. These cutting machines feature high speed, productivity, and exceptional cutting accuracy. They deliver unparalleled precision and repeatability. Our fiber lasers are primarily intended for processing the following materials: - Non-ferrous metals - Aluminum - Stainless steel - Carbon steel LASER SOURCE POWER: 3000W CONSTRUCTION The frame of our laser has been designed and manufactured entirely in our factory. The high-grade steel used for machine production is cut, then welded, and precisely machined. The entire frame, gantry, and gantry arms have additional ribbing to ensure high rigidity and eliminate vibrations and deformations. DRIVES Our machines are powered by high-resolution, high-power Schneider AC servo systems (Y1Y2 x 2000W, x 1500W, z 400W), ensuring proper acceleration and speed in all directions. Power transmission is achieved through high-quality planetary gearboxes. Classic, proven helical racks are used on the X and Y axes, ensuring durability and precision. Hsdpfxex Tn S Is Aa Dsr CUTTING HEAD Sheet metal cutting is performed with a water-cooled WSX head. High-grade quartz glass lenses focus the dispersed laser beam on the material, ensuring high cutting accuracy. To maintain optimal processing, the HSU system automatically adjusts the head height, compensating for material irregularities. A protective window located between the nozzle and the lens shields the lens assembly from splashes of molten metal. LASER SOURCE The machine uses a Raycus Laser source, known for high electro-optical conversion efficiency, low energy consumption, and superior beam quality. This allows for faster, more effective operation and helps eliminate operator errors. The source is also resistant to back reflection, i.e., the return of the beam to the laser. Stable power output ensures efficient operation while minimizing energy consumption. COOLING Industrial S&A CWFL dual-temperature chillers are specially designed for cooling fiber lasers. These units are equipped with extensive alarm functions: compressor delay protection, compressor overcurrent protection, water flow alarm, and high/low temperature alarm. EXCHANGEABLE WORK TABLE The exchangeable work table, located at the rear of the machine, minimizes laser downtime. Automatic table exchange takes only 10 seconds. This feature allows the operator to remove cut parts from the table and load a new metal sheet while the laser continues working on the other table. This system guarantees a very high production throughput. AUTOMATIC LUBRICATION SYSTEM To keep the machine in optimal condition, rack and guide rails must be lubricated with oil at least every few days. The automatic system initiates lubrication at preset intervals and in the correct quantity, with all parameters configurable via the software.

Būklė: naudotas, Gamybos metai: 2025, Belt width: 150 mm Belt length: 2000 mm Belt speed: 1400 / 2800 rpm Tube diameter: 40 – 140 mm Voltage: 380 V Total power requirement: 3.0 kW Machine weight approx. 360 kg. Hsdpfxow U U U Dj Aa Der Demonstration machine - like NEW Not yet used (!!) Original price approx. €6,500 Special price on request - Machine video - identical model - ?v=LXP09NFTnlw&t=1s The FALKEN PN 38/140 is a multifunctional grinding machine for tube and profile end grinding Features: - Robust electro-mechanical tube and profile notching machine - Allows notching at angles up to 50° - Large surface belt grinding area with protective cover - 2 belt speeds - Operator control panel, front left - including emergency stop button - Grinding belt quick and easy to replace - Vice movement to the right – left, forward & backward possible - Lateral grinding dust collection container - Horizontal & vertical grinding orientation possible - 1 set of grinding rollers included (Ø 76-90-114 mm) * Additional dimensions available at extra cost

Būklė: naujas, Gamybos metai: 2025, Sheet width: 1320 mm Hedpfx Aaoxabz Hs Djr Sheet thickness: 2.5 mm (mild steel) Sheet thickness (stainless steel): 1.2 mm Blade length: 1350 mm Strokes per minute: 34 Back gauge – adjustable, max. 825 mm Cutting angle: 1.5° Working height: 810 mm Control: conventional Motor power: 3.0 kW Weight: 1100 kg Dimensions L-W-H: 1950 x 1450 (2000) x 1200 mm Exhibition machine – as NEW Has not been in use (!!) Special price upon request Equipment: - Robust electro-mechanical guillotine shear - Heavy-duty drive motor - Manual back gauge with analog position display * Adjustment range max. 825 mm - Manual blade gap adjustment - 2x table side stops with mm scale - 1x front stop bar – manually adjustable - 2x front support arms - Grip recess in the front worktable - 1x movable foot switch with emergency stop button - Control cabinet/operation – front right - Rear safety guard - Rear sheet metal chute - Connection cable + plug

Būklė: naujas, Pressure: 150 t Stroke: 300 mm Table surface: 1070 x 290 mm Clearance between uprights (guide distance): 1070 mm Rapid approach speed: 9.0 mm/sec Working speed: 5.0 mm/sec Return speed: 10.0 mm/sec Motor power: 11.0 kW Machine weight: approx. 2070 kg Dimensions (L x W x H): 2200 x 1200 x 2550 mm Features: - Robust electro-hydraulic workshop press with adjustable cylinder - Ideally suited for straightening axles, shafts, etc., as well as pressing in and out pins, bearings, bushings, and much more Hedpfx Aaexabnae Dor - Sturdy welded steel construction for high-duty applications - Table height adjustment via piston rod * Includes round steel chain and 2x retaining pins * Piston rod with metric mounting - 1x set of V-block prism supports - Pressure gauge for pressure display - Simple manual controls with: * 1x rapid approach speed * 1x working speed * 1x return speed - Piston can be stopped in any position - Side-mounted hydraulic tank - Operating manual

Būklė: naujas, Pressure 100 t Stroke 300 mm Table surface 1070 x 315 mm Distance between columns (guideways) 1070 mm Rapid traverse speed 8.0 mm/sec Working speed 5.0 mm/sec Return speed 10.0 mm/sec Oil capacity 90.0 l Motor power 5.5 kW Machine weight approx. 1870 kg Space requirement approx. 2050 x 1000 x 2200 mm Equipment: Hodexaar Depfx Aa Djr - Robust electro-hydraulic workshop press with adjustable cylinder - Ideally suited for straightening axles, shafts, etc., as well as for pressing in and out pins, bearings, bushings, and much more - Heavy-duty welded steel construction for high loads - Table height adjustment via piston rod * Including round steel chain and 2x locking pins * Piston rod with metric interface - 1x set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1x rapid traverse speed * 1x working speed * 1x return speed - The piston can be stopped in any position - Side-mounted hydraulic tank - Operating manual

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Pressure: 150 t Stroke: 300 mm Table surface: 1070 x 290 mm Clearance between uprights (between guides): 1070 mm Approach speed: 9.0 mm/sec Working speed: 5.0 mm/sec Return speed: 10.0 mm/sec Motor power: 11.0 kW Machine weight: approx. 1870 kg Dimensions (L x W x H): 2200 x 1300 x 2300 mm Exhibition machine from 2025 With only approx. 2 operating hours Condition: like NEW Special price on request Equipment: - Robust electro-hydraulic workshop press with fixed cylinder - Ideally suited for straightening axles, shafts etc., as well as for pressing in and out of pins, bearings, bushings and much more - Sturdy welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2 locking bolts * Piston rod with metric receptacle - 1 set of V-block prism supports - Pressure gauge for pressure indication - Simple manual control with: * 1x approach speed * 1x working speed * 1x return speed Hsdpexaabfofx Aa Dsr - The piston can be stopped in any position - Hydraulics tank fixed laterally - Operating manual

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Press force 80.0 t Stroke 250 mm Table surface 1040 x 260 mm Frame opening between guides 1040 mm Approach speed 8.0 mm/sec Working speed 5.0 mm/sec Return speed 10.0 mm/sec Motor power 5.5 kW Machine weight approx. 835 kg Hsdpfx Aasw U U Sve Dor Space requirements approx. 1810 x 700 x 2100 mm Exhibition machine from 2023 with only approx. 2 operating hours Condition: LIKE NEW Special price on request Equipment: - Robust electro-hydraulic workshop press with fixed cylinder - Ideally suited for straightening axles, shafts, etc., as well as for pressing in and out pins, bearings, bushings and much more - Heavy-duty steel welded construction - Table height adjustable via piston rod * Including round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with: * 1x approach speed * 1x working speed * 1x return speed - Piston can be stopped in any position - Hydraulic tank mounted laterally - Operating manual

Būklė: naujas, 2 speeds: 36/72 m/min Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: flat 330x260 mm Cutting capacity at 60°: round 180 mm Cutting capacity at 60°: square 170 mm Cutting capacity at 60°: flat 170x170 mm Cutting capacity at 45°: round 260/200 mm Cutting capacity at 45°: square 250/180 mm Cutting capacity at 45°: flat 270x200/200x160 mm Saw blade dimensions: 3650x27x0.9 mm Total power requirement: 1.5/1.8 kW Machine dimensions: 2130x1400x1950 mm Weight: 670 kg Electro-hydraulic, semi-automatic bandsaw with semi-automatic dynamic/manual operation. Equipped with an MEP-30 controller for mitre cuts from 45° right to 60° left. MEP 30 is the latest generation of controller. Semi-automatic function: - Vice closes and motor starts - Saw head lowers to perform the cut - Motor switches off - Saw head rises - Vice opens Semi-automatic dynamic system: - Manual lowering of the saw bow to the desired position - Cycle start via hand button - Upper position is stored automatically Main features: - Hydraulic unit with high-efficiency electric valve and high-pressure hydraulic pump (200 bar) - Electronic machine control with new generation micro-controller - Electrical system centralised in the main switch cabinet - Display of alarms, diagnostics, and machine functions (cutting time, number of pieces cut, saw blade motor current draw, saw head position, blade speed, blade tension) Hsdpfx Aaoyv Nmls Dsr - Manual/semi-automatic/dynamic function included as standard Some features: - Operating panel with low voltage: polyester membrane keypad with thermoformed, raised push buttons and acknowledgment control signal - IP55 manual cycle lever, 24 V - Complete program for all special cutting cycles - New hydraulic controller with low energy consumption, standby operation - Turntable on 420 mm roller bearing with preloaded thrust bearing and replaceable steel work table - Saw bow lift travel programmable directly from the control panel for adapting to different cutting materials - Clamping device adjustable laterally to the left and right, with quick-action vice - Manual blade tension control with on-screen display via electronic converter

Būklė: naudotas, Gamybos metai: 2023, keliamoji galia: 6 000 kg, kėlimo aukštis: 20 800 mm, šakių ilgis: 1 200 mm, bendras ilgis: 7 890 mm, - Rotating Telescopic Handler RTH 6.21 - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lifting height: 20.80 m - Continuous 360° rotation Hsdpfxezkb Nfj Aa Dor - Rated power: 100 kW (136 HP) at 2,200 rpm - Max. torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Max. pressure: 480 bar - Flow rates: Electronically controlled axial piston pump. Variable displacement motor. - Transmission: Dropbox gearbox with 2 speeds for forward and reverse - Axles and brakes: Axles with planetary final drives - Rear axle: Steering oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees - Service brake: Oil-immersed multi-disc brakes on each axle, hydraulically operated - Parking brake: Negative brake, hydraulically operated - Tire size: 445/65 R22.5 - Performance: - Max. travel speed: 40 km/h - Max. towing force at tow hook: 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Max. operating pressure: 350 bar - Hydraulic system type: Load sensing - Working pump: Danfoss / Casappa variable displacement pump - Valve block for boom and upper carriage movements: Danfoss electro-proportional valve SIL - Valve block for outriggers: Bosch Rexroth electrohydraulic actuators - Motion control: Two 2-axis Danfoss joysticks with deadman function; control via CAN-bus technology