Lentynos Jungtis Distancinė Lentyna pirkti naudotą (3 784)

Būklė: geras (naudotas), Gamybos metai: 1989, Mašina su pilna komplektacija Ilgis apie 9 m Sujungimas Kraštų pjovimas Išankstinis frezavimas Lhodpfx Amof Ua R Hj Hjf Apvalinimo frezavimas Kampų kopijavimas Traukiamoji ašmenys Poliravimas Kampų kopijavimas

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, META CLIP lentynų sistema Cinkuota, aukštos kokybės. Rėmo aukštis: 200 cm Lhedpey D S Afefx Am Hof Lentynos gylis: 40 cm Lentynos plotis: 100 cm Lentynos apkrova: 100 kg Lentynų aukštis su klipų sistema visiškai lanksčiai reguliuojamas Iš viso yra 25 metrai. Kaina už 2 rėmus, 6 lentynas – 119 € Pridedama lentyna: 1 rėmas, 6 lentynos – 79 € Skersinės atramos įskaičiuotos. Pageidaujamą ilgį ir lentynų kiekį galime pasiūlyti pagal užklausą.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level. Lhodpfx Aofdkb Tom Hjf

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with foot section, usable depth 1,200 mm - 27 cantilever arms with a usable depth of 1,200 mm, equipped with deflectors - 9 roof supports with a projection of 1,500 mm, pre-drilled for customer-supplied roof construction (*Excludes timber purlins and trapezoidal sheets for roof construction) - Includes longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts re-orderable and extension possible at any time) Lhodeh R Taqopfx Am Hsf - (*Available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components’ surfaces are hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (max. snow load 1.85 kN/m², wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (max. snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, 1,200 mm deep, with deflectors = 4 storage levels above each other - Including longitudinal and diagonal bracing with 1,500 mm axle spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load labels C4 in accordance with DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight service with advance delivery notification. Material is packaged for ease of unloading. The foundation must be concrete, level, suitable for doweling, and capable of bearing all imposed loads. Floor conditions and load-bearing capacity as well as any necessary official permits are to be checked and ensured by the customer. The uprights must be anchored to the floor by the customer; wall anchoring is neither required nor recommended. According to trade association guidelines, uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Lodpfx Amemhhypj Hshf Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including horizontal and diagonal braces for 1,300 mm frame spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) Ljdpfx Amjmhh Dho Hshf - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available at any time and system can be expanded - Larger quantities available: approx. 40 uprights in stock Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Professional telephone support - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance delivery notification. The material is packed in a way that allows easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level and dowel-able, and able to support the applied loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least 500 mm of overhang above the top storage level. Ljdpfxsmhh Dzo Am Hehf

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) Lsdjmhh Anspfx Am Hohf - With assembly instructions and load plates C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) Lhedpsguk A Hjfx Am Hsf - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm Lhjdpfx Amsguk Dko Hef - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Scope of Delivery: Lodpsmhhy Nofx Am Hohf - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standards Lhedpfsmhh Dtex Am Hof - Expert technical advice by phone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) Lhjdjguk Dvepfx Am Hjf - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Oil Quick varžtai ØKoto varžtas Atstumas Kaina: OQ70 60/60 280 330 3.000,00 € OQ80 90/90 345 510 3.500,00 € OQ80 90/90 353 515 3.500,00 € QO80 90/90 355 510 3.500,00 € OQ80 100/90 387 530 3.500,00 € OQ80 100/100 420 610 3.500,00 € OQ80 90/90 350 510 3.500,00 € OQ80 90/90 350 500 3.500,00 € Lhjdpfxsxhdh So Am Hof OQ80 90/90 350 510 3.500,00 € OQ80 80/80 310 475 3.500,00 € OQ90 110/100 440 595 18.000,00 € OQ90 be tvirtinimo 15.000,00 € OQ90 110/110 470 590 18.000,00 € Verachtert varžtas Ø Koto varžtas Atstumas CW40 80/80 310 445 2.000,00 € Lehnhoff varžtas Ø Koto varžtas Atstumas HS21 80/80 465 333 2.000,00 € HS21 80/80 305 475 2.000,00 € Taip pat yra papildomų montavimo plokščių Liebherr varžtas Ø Koto varžtas Atstumas SWA 48 65/65 253 370 2.000,00 € SWA 48 80/70 350 420 2.000,00 € SWA 48 80/80 327 460 2.000,00 €

Būklė: geras (naudotas), Rėmai: 8860x1050x80 mm – 34 vnt. 3000x1050 mm – 7 vnt. Sijos: 1860x75x45 mm (2800 kg/lentynai) – 352 vnt. 2760x115x40 mm (2400 kg/lentynai) – 26 vnt. 2700x100x50 mm (2400 kg/lentynai) – 22 vnt. Galima įsigyti ir dalinius kiekius. Jei jums reikia lentynų ar priedų kitokių komplektacijų ar variantų, susisiekite su mumis. Siūlome platų naujų ir naudotų lentynų bei priedų asortimentą ir mielai padėsime Jūsų planavime. Individualus, Jūsų poreikiams pritaikytas pasiūlymas mums yra savaime suprantamas dalykas. Lhjdpod Hbqnofx Am Hof Siuntimas: Prašome teirautis dėl siuntimo kainos, nurodydami savo pašto kodą, miestą bei pageidaujamą prekių kiekį.

Būklė: labai geros būklės (naudotas), Diskinis vožtuvas, sklendė, rutulinis vožtuvas, uždarymo sklendė, uždarymo vožtuvas, užsklanda, membraninis vožtuvas, membraninis uždarymo vožtuvas, flanšinis uždarymo vožtuvas - Gamintojas: KSB, užsklanda uždarymo vožtuvas, tipas BOA-W - Jungtis: DN 50 PN 6 - Kiekis: 3 vožtuvai prieinami Lsdpfx Aorp Ikrem Hjhf - Kaina: už vienetą - Matmenys: 230/140/H260 mm - Svoris: 8,6 kg/vnt.

Būklė: geras (naudotas), hydrodynamic fluid coupling, centrifugal clutch, rubber disc coupling, jaw coupling, connecting coupling -Manufacturer: Fludex -Type: FA 395 -External diameter: 430 mm Lodsdfawcjpfx Am Hshf -Bore diameter: Ø 65 mm -Torsionally flexible (resilient) coupling recess: 138 mm -Bolt circle: 160 mm, 8x holes -Dimensions: 430/430/H245 mm -Weight: 41 kg

Būklė: labai geros būklės (naudotas), Parduodamas presavimo įrankis AMP 656075-1 TE Connectivity jungtims. Lodpfsw Svqnex Am Hshf

Būklė: labai geros būklės (naudotas), Parduodu Molex 6982 jungčių suspaudimo įrankį. Lsdpfx Amew Sliaj Hshf

Būklė: geras (naudotas), Kiekvienos lentynos stiklo padėtis: 65 mm Maksimalus stiklo aukštis: 1680 mm Plotis: 1500 mm Lodpfx Amoyx Uf Sj Hshf Gylis: 2600 mm Aukštis: 2060 mm Būklė: Geras, naudotas

Būklė: geras (naudotas), Valdymo blokas, valdymo pultas, valdymo panelė, valdymo vienetas, klaviatūra, ekranas, valdymas -Siemens: Profinet Connectivity-Box PN Plus -Tipas: 6AV6 671-5AE11-0AX0 -Kiekis: 7 prijungimo dėžutės prieinamos -Kaina: už vienetą Lodeyvptxjpfx Am Hshf -Matmenys: 230/160/H75 mm -Svoris: 0,7 kg/vnt.

Būklė: naudotas, Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Modell 5003, keliamoji galia vienai konsolės svirčiai: 1 500 kg, lentynos aukštis: 3 585 mm, bendras ilgis: 6 200 mm, bendras plotis: 1 520 mm, bendras aukštis: 3 985 mm, lentynų eilučių skaičius: 8, Konsolinė lentyna, ištraukiama, gamintojas Lützenkirchen Lhodpfsyzn S Rjx Am Hjf

Būklė: geras (naudotas), Konsolinė lentyna, sunkių krovinių lentyna, vienpusė konsolinė lentyna, padėklų lentyna - Konsolinė lentyna: dvipusė, aukštis 4000 mm - Stovai: 5 vnt. 340/150/H4000 mm / 350/300/3400 mm - Konsolinės sijos: 70 vnt. 140/140/1500 mm - Skersinės sijos: 124 vnt. 60/40/1350 mm - Atidavimas/kaina: pilnas komplektas - Svoris: 4100 kg Lhodpfxeyu Um Tj Am Hjf

Būklė: geras (naudotas), Metal bellows coupling, jaw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling Lhsdpfx Amjt Tryge Hsf -Manufacturer: Flender, shaft coupling -Type: N-Eupex Size 225 -Shaft: Ø 60/70 mm (see photos) -Dimensions: Ø 225 x 180 mm -Weight: 26.1 kg

Būklė: naudotas, Spaudimo aukštis 140 mm Spaudimo jėga 70 kN (7 t) Hidropneumatinis pavara Suslėgto oro jungtis 7 bar Lhodpfxsyvgm Ao Am Hef Oro sąnaudos vienam darbo ciklui 35 l Ilgis 1.100 mm, gylis 950 mm, aukštis 1.230 mm Svoris 550 kg