Lange & Geilen Horizontalusis Formuotuvas pirkti naudotą (2 564)

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, temperatūra: 220 °C, izoliacinė medžiaga: Mineralwolle 75 kg/m³, izoliacijos storis: 150 mm, Powder curing ovens in various sizes 1 Internal dimensions Length 1,500 - 6,500 [mm] 2 Internal dimensions Width 1,700 - 1,900 [mm] 3 Internal dimensions Height 2,000 [mm] Fodsfhv Tlepfx Afdjph 4 Substructure Steel profile 5 Walls Double-sided galvanized sheet metal 1mm, external RAL 6 Insulation Walls, ceiling rock wool 150mm 75kg/m² 7 Floor Oven equipped with 2 drive-in rails for rack trolleys (optionally with conveyor technology) 8 Temperature 220°C 9 Fans 1 - 2 units 2,600 - 15,000 [m³/h] 10 Electric motors 1 - 2 units 1.1 - 6 [kW], 1450 [rpm], 3~ 50 [Hz] 11 Thermal output 14 - 99 [kW] 12 Wing or sliding doors Single or double-sided 2 - 4 units Insulated with rock wool 150mm 75kg/m² Heating Indirect via thermoblock 13 Thermoblock Stainless steel INOX AISI 316, heating electric or gas, with heat-resistant fans and heat-resistant bearings, thermoblock equipped with overheat protection

Būklė: dilaminuotas dirbtuvėje (naudotas), Slotting spindle 1 pc. Number of milling units 5 pcs. Fpodpfx Afjvu Hghsdoh Spindle diameter 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully inspected before delivery ----- Technical Data Summary (For any additional included accessories, please inquire) Item 1: Cross-Cut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Radial travel, pneumatically controlled, 8 positions, e.g. for edge rounding from above > Laser guide light for cut section identification Item 2: Rounding Unit, Horizontal Lower Position ----- > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial movement mechanically linked with cross-cut saw > Radial travel, pneumatically controlled (on/off) NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Item 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3,500 rpm > Max. tool circle diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 4: 1st Profiling Spindle (Climb/Counter-Climb Cutting) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 7.5 kW Item 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash support rail from above in the area of the vertical right profiling unit and profiling spindle. Item 6: Horizontal Upper Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool circle diameter: 130 mm > Axial travel: 30 mm, 8 positions > Radial travel: 125 mm, 8 positions Item 7: 3rd Profiling Spindle (Hardware Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial travel: 115 mm, 8 positions > Radial travel: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool circle diameter: 210 mm > Motor power: 3.0 kW Item 8: Bottom Profile Milling/Grooving Unit ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Parduodu šią paruoštą naudoti DMS Digital kortelių pjaustyklę Serie 3, su ilga išvedimo dalimi, daugiafunkcinė kortelių pjaustyklė / Multi-Finished su perforavimo ir bigavimo funkcijomis, pagaminimo metai 2024. Naujos kaina 12 900 €. Skaitiklio rodmuo tik 5900 lapų. Lapo padavimas su oro pūtimu ir dvigubo lapo kontrole, maksimalus formatas iki 33x67 cm. Programuojami pjūviai. Programuojamas bigavimas arba perforacija. Du dvigubi peiliai su 8 mm juostelių išpjova, du šoniniai peiliai. Greito peilių keitimo sistema – tik 1 minutė paruošimo laiko. Ilga juosta su motorizuota automatinio žuvėdros tipo išvedimo sistema. Fsdpfsy Ufnpjx Afdeph Pardavimo kaina 6 720 € + PVM, atsiėmimas vietoje. Lokacija: 63450 Hanau (prie Frankfurto/Maino), Vokietija. Jei turite klausimų ar reikia daugiau informacijos, rašykite mums žinutę arba skambinkite.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, I am selling a four-sided brushing machine suitable for windows, doors, tables, etc. Futura MS120 Y1 X2, year of manufacture 2005 Working width: 1200 mm Working height: 200 mm Fpedod Raqkepfx Afdeh Total weight: 2500 kg Configuration: Side sanding heads left - right, height 170 mm 2 lower heads left - right, nylon, width 140 mm Oscillating top head, width 260 mm Large sanding heads top and bottom, width 1150 mm Machine is supplied complete with all heads shown in the pictures. Available immediately.

Gamybos metai: 1998, būklė: labai geros būklės (naudotas), I am selling the following window manufacturing set: - 1 unit Mortise and Tenon Machine Weinig Unitec 10. - 1 unit Profile Shaping Center Weinig Univar 10. Year of manufacture: 1998. Milling heads from OERTLI. Available immediately. Fpjdpfx Aefzzhyofdsh Price for the complete set: €17,000. Condition: very good!

Gamybos metai: 1998, būklė: labai geros būklės (naudotas), I am selling the Weinig Univar 10 window profile folding machine center. Year of manufacture: 1998. Milling heads: OERTLI. Available immediately. Fsdpfx Ajfzzhrefdsph Unit price: €8,500. 4 units available. Condition: very good!

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, I am selling a complete window profile production line: 1 pc. 5-spindle four-side planer with saw Weinig Unimat 23EL - without HESS sanding machine; an alternative replacement machine can be arranged 2 pcs. tenoning and slotting machines Weinig Unitec 10 2 pcs. profiling and rebate automats Weinig Univar 10 Center Fedpfefzzidsx Afdoph 1 pc. CNC dowel machine KOCH WinDoor - set of complete Weinig automation (feed system and conveyors) Year of manufacture: 1997. Cutter heads: OERTLI. Available immediately. Already dismantled and delivered on original pallets. Condition: very good!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, I am selling the SCM Multiflex window fabrication corner jointing machine. Equipped with VIVALDI EU68mm milling heads. Tenoning unit and mortising spindle on the right (tenoning side). Two profiling spindles and glazing bead cutting saw on the left (profiling side). Available immediately. Fpjdpfxohw Dfys Afdeh

Gamybos metai: 1998, būklė: labai geros būklės (naudotas), I am selling the Weinig Unitec 10 tenoning and slotting machine for window production. Fsdpfx Asfzzhkjfdoph Year of manufacture: 1998. Milling heads by OERTLI. Available immediately. Unit price: €8,500. 3 units available. Condition: very good!

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2012, I am selling the OMGA BA825 window manufacturing table (+A+U). Year of manufacture: 2012. Complete set. In very good condition. Available immediately. Fjdot Ndz Uopfx Afdoph

Būklė: geras (naudotas), Gamybos metai: 2009, Déplacements XYZ : 850 x 700 x 750 mm Dimension palette : 500 x 500 mm Charge maximale sur palette : 500 kg Changeur automatique d’outils : 60 positions (ATC) Cône de broche : BT40 Commande : Fanuc 31i Puissance de broche : 22 kW Axe B : incrément de 0,001° Vitesse de broche : 14 000 tr/min Fodewq Iwxjpfx Afdsph Convoyeur à copeaux Arrosage à travers broche

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2011, veikimo valandos: 31 113 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 560 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 660 mm, greitas poslinkis X ašimi: 560 m/min, greitas poslinkis Y ašis: 560 m/min, greitasis eiga Z ašyje: 660 m/min, nominali (akivaizdi) galia: 38 kVA, valdiklių gamintojas: MITSUBISHI MSX-853 IV, ruošinio ilgis (maks.): 630 mm, ruošinio plotis (maks.): 630 mm, ruošinio aukštis (maks.): 900 mm, ruošinio skersmuo (maks.): 630 mm, ruošinio svoris (maks.): 400 kg, bendras aukštis: 2 513 mm, bendras ilgis: 2 720 mm, bendras plotis: 4 224 mm, stalo plotis: 400 mm, stalo ilgis: 400 mm, bendras svoris: 7 600 kg, veleno greitis (min.): 12 000 aps./min, CNC Control: MITSUBISHI MSX-853 IV Axes Travel X-axis (mm): 560 Travel Y-axis (mm): 560 Travel Z-axis (mm): 660 Distance spindle nose to table surface (mm): 80-640 Feed speeds (m/min): 0-60 Work Table Number of pallets: 2 Pallet dimensions (mm): 400 x 400 Max. workpiece size (diameter x height, mm): 630 x 900 Max. workpiece weight (kg): 400 Fpjdpfoy Rn Nbsx Afdeh Pallet change time (sec): 9 Standard division (degrees): 360 - 0.001º Spindle Max. spindle speed (rpm): 12,000 Spindle drive power (kW): 15/11 Spindle torque (Nm): 110 Bearing inner diameter (mm): 80 Type: SJ-2B4351TK Tool System Number of tools in magazine: 40 Max. tool diameter (mm): 70 With adjacent pockets free (mm): 170 Max. tool length (mm): 450 Max. tool weight (kg): 8 Tool shanks: MAS-BT40 Equipment Chip conveyor Work area lighting 4th axis Coolant system Tank capacity (liters): 170L High-pressure coolant (bar): 15 Machine operating hours: Power-on time (hours): 64,734 Total power requirement (kVA): 38 Operating time: 31,113 Base Machine: Dimensions / Weight Length (mm): 2,720 Width (mm): 4,224 Height (mm): 2,513 Weight (kg): 7,600

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Weinig gamybos linija CONTUREX C 125, pagaminimo metai 2018. Fsdpjy Emrkofx Afdsph

Būklė: naudotas, Gamybos metai: 2014, Techninės detalės: Fpedpfx Afsxrwpdedoh x eiga: 760 mm y eiga: 760 mm z eiga: 760 mm Bendras galingumo poreikis: 43 kW Apytikslis staklių svoris: 11,5 t Reikalinga vieta apytiksliai: 2,7 x 4,73 x 2,87 m maks. stalo apkrova: 500 kg

Būklė: naudotas, Gamybos metai: 2007, Technical details: Machine weight approx.: 11.2 t Fpsdpfx Aewi Nigjfdeh

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Kampinis apdirbimo centras langų ir durų gamybai „SCM“ mod. WINDOR 60 Įrenginys vis dar veikia, galima apžiūrėti pas stalių. Siūloma, kol bus parduota. Fpodpszacx Uofx Afdjh

Būklė: geras (naudotas), Gamybos metai: 2012, Nuor. Nr.: 10558 Gamintojas: YOU JI Tipas: HMC 1200 BP Pagaminimo metai: 2012 Valdymo tipas: CNC Valdymas: FANUC Series 18i-MB Sandėliavimo vieta: Halberstadt Kilmės šalis: Taivanas Fpjdpfexxpbxsx Afdjh X eiga: 1800 mm Y eiga: 1500 mm Z eiga: 1360 + 990 mm B ašis: 360° W ašis: 700 mm Stalo matmenys (ilgis x plotis): 1200 x 1400 mm Stalo apkrova: 5 000 kg Didžiausias įrankio svoris: 25 kg Didžiausias įrankio ilgis: 400 mm Didžiausias įrankio skersmuo: 125 mm Veleno sukimosi greitis: 30–3 500 aps./min. Padėklų skaičius: 2 Papildoma informacija: 4 ašių sinchroninis apdirbimas IKZ (vidinis verpstės aušinimas) AKZ (išorinis verpstės aušinimas) Sinchroninis veržlėjimo pjovimas (standus sriegimas) Renishaw RMP60 ruošinio matavimo jutiklis (belaidis) 2 vnt. padėklų keitikliai automatiniam padėklų keitimui Dydis: 1200 x 1400 mm Įrankių magazinas, įrankių kiekis: 60 Staklės dirba gamyboje, apžiūrėti galima susitarus iš anksto.

Būklė: naudotas, Gamybos metai: 1999, Techniniai duomenys: X eiga: 630 mm Y eiga: 630 mm Z eiga: 630 mm Valdymas: Unipro 90 Padėklų keitiklis 2x: 400 x 500 mm Detalės montavimo aukštis: 800 mm Apdirbamos detalės skersmuo: 720–850 mm Veleno lizdas: SK 40 Fsdpfjy Rmk Rjx Afdjph Veleno apsisukimų diapazonas - be pakopų: 10–8000 1/min Veleno galia: 20 / 30 kW Veleno sukimo momentas: 95/143 Nm Įrankių žurnalas: 80 SK 40 Bendras energijos poreikis: 55 kW Staklių svoris apytiksl.: 11 t Staklės su Siemens Unipro 90 valdymu, 5 ašių, su papildomu apvaliu stalu viename padėklyje - Dvigubas padėklų keitiklis - Įrankių keitiklis, 80 pozicijų - Pilnai aktyvios A ir B ašys - Vidinis aušinimo įrenginys su 7 slėgio pakopomis nuo 5 iki 50 bar - Darbo zonos išplovimas - Detalės matavimas Blum

Būklė: naudotas, Gamybos metai: 2006, mašinos/transporto priemonės numeris: 105554, We are offering this used Weinig Conturex window production line, year of manufacture 2006. Machine number: 105554 Machine type: Conturex Year of manufacture: 2006 Circuit diagram number: FP 3013 Supply voltage: 3×400 V Supply frequency: 50 Hz Control voltage: 230 V Control frequency: 50 Hz Control voltage: 24 V Control frequency: 0 Hz Main fuse: 139 A Current capacity: 160 A Power: 61 kW For any questions or if you require additional information, please send us a message or contact us by phone. CNC machining centre for processing wooden profiles (windows, doors, etc.). Additional linear tool magazine (120 positions). Two 4-axis machining heads for simultaneous operation (20kW). Automatic loading and unloading tables. Optionally, a comprehensive tool package is available for purchase (tool holders, angle heads, profile cutter heads). The machine is currently in continuous use. The machine was purchased in 2024 after thorough overhaul. Since then it has worked 15 months on a single shift basis. Technical data: Working range: Minimum width: 25 mm Maximum width: 260 mm Minimum height: 10 mm Maximum height: 150 mm Minimum length: 180 mm Maximum length: 4500 mm The maximum working length is achieved by multiple repositioning of the workpiece in the clamp. Milling spindle no. 1: Number of axes: 4 Motor power S1: 20 kW Spindle speed range: 0 – 18,000 rpm Rotation direction: right / left C-axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450°/s Auxiliary magazine for milling spindle no. 1: - magazine type: disc - magazine capacity: 18 tools - holder spacing: 100 mm - max tool weight: 10 kg - max total tool weight: 130 kg - tool holder type: HSK F 63 Milling spindle no. 2: Motor power S1: 20 kW Spindle speed range: 0 – 18,000 rpm Rotation direction: right / left C-axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450°/s Auxiliary magazine for milling spindle no. 2: - magazine type: disc - magazine capacity: 18 tools - holder spacing: 100 mm - max tool weight: 10 kg - max total tool weight: 130 kg - tool holder type: HSK F 63 External magazine: - magazine type: linear - magazine capacity: 120 tools - holder spacing: 80 mm - tool holder type: HSK F 63 Loading table: transverse, automatic Unloading table: transverse, automatic Fpedpfjyu Sn Uex Afdoh CNC control: PLC control: Siemens S7 Mobile control panel Controller computer: - operating system: Microsoft Windows - modem for data transfer and diagnostics - touchscreen display Siemens Sinumerik 840 D Number of axes: 4 The machine is fully operational and currently in continuous production. For an additional fee, a comprehensive package of accessories is available: 8 angle heads, a set of 3 standard holders, a set of 17 new arbors for cutter heads.

Būklė: naudotas, We are offering used pallet racks here. TECHNICAL DATA Manufacturer: SLP Frame height: approx. 10,900 mm Frame profile: SL 25 Frame depth: 1,100 mm Profile dimensions: 100 x 85 x 2.5 mm Pitch adjustment: 70/70 mm Colour: blue The uprights are pre-assembled (bolted truss construction) Beam width: 2,830 mm (clear span) Beam type: RTS Box profile: 110 x 50 mm Colour: orange Shelf load: 3,000 kg per pair of beams PRICES Starter bay: €595.10 net (2 frames + 10 beams) Add-on bay: €382.55 net (1 frame + 10 beams) QUANTITY DISCOUNTS Starter bay 1 - 5 units: €595.10 net y Starter bay 6 - 20 units: €571.30 net Starter bay 21 - 50 units: €547.49 net Starter bay from 51 units: €523.69 net Add-on bay 1 - 5 units: €382.55 net Add-on bay 6 - 20 units: €367.25 net Add-on bay 21 - 50 units: €351.95 net Add-on bay from 51 units: €336.64 net PROJECT PLANNING Our sales team will be pleased to prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. TERMS OF PAYMENT Payment terms will be coordinated at the time of order. Prices are quoted per unit/net price as specified in the description (plus VAT). You will, of course, receive an invoice showing the applicable VAT. Fpedpfx Aoy Dgdqsfdoh ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and skilled crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us.

Gamybos metai: 2009, būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Kapitališkai suremontuota-nauji guoliai,diržai,pilnai perdažyta Tešlos gabaliukai 30-1800 gr Matmenys 230x90x150 cm Fpsdoyfm E Aspfx Afdjh

Būklė: geras (naudotas), Turning tool with indexable inserts, clamping holder, tool bit, indexable insert holder, turning blank, indexable turning tool steel, internal diameter boring bar, turning tool holder, boring bar - Turning tool: Boring bar, internal diameter boring holder with indexable insert Fsdpfx Afot Acyisdeph - Type: Length 520 mm - Ref.: 701-12-201119 - Dimensions: 520/40/33 mm - Weight: 4.3 kg

Būklė: geras (naudotas), Šakinio krautuvo kaušas, hidraulinis šakinio krautuvo kaušas, lengvosios medžiagos kaušas, verstuvas, konteinerių verstuvas, krautuvų šakės, šakinio krautuvo šakės, šakių žnyplės -Šakinio krautuvo šakės: 2 vnt./1 pora -Ilgis: 900 mm -Dėmesio: prašome atkreipti dėmesį į būklę nuotraukose -Skerspjūvis: 100 x 40 mm -Tvirtinimas: 400 mm (žr. schemą nuotraukose) Fpjdpfx Afetvb D Ujdoh -Transportavimo matmenys: 1020/565/H100 mm -Svoris: 98 kg

Būklė: naudotas, Gamybos metai: 2006, Doosan Daewoo Ace-VC500 dvigubos paletės horizontalus apdirbimo centras su Fanuc Series 21i-MB CNC valdymu (2006) Fpsdpfx Ajzcnb Hjfdeh Pastaba: Šie įrenginiai yra Italijoje. Visi įrankiai siūlomi tik tiksliai aprašyti.

Gamybos metai: 2010, būklė: labai geros būklės (naudotas), Parduodu langų komplektus, tinkamus CNC langų gamybos centrui: VYDONA MEDIS EU78-92, VYDONA medžio-aliuminio 92 mm, 50 mm skylė. Viskas pilnai komplektuota. Labai gera būklė. Galima įsigyti vienu komplektu arba atskirai. Fjdpfx Afoy D E S Hjdeph