Krauss-Maffai Km 150-700 C1 pirkti naudotą (26 847)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising Unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, opening: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Max. daylight: 1150 mm Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Electro-hydraulic equipment Iaedpow U Rcdjfx Aatjw Pump motor power: 45 kW Heater power: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke according to Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Būklė: geras (naudotas), rida: 105 735 km, galia: 90 kW (122,37 AG), pirmoji registracija: 09/2014, kuro tipas: elektrinis, padangos dydis: 215/75R17,5, ašių konfigūracija: 4x2, ratų bazė: 4 200 mm, kuras: elektra, stabdžiai: retarderis, spalva: balta, vairuotojo kabina: dieninė kabina, pavaros tipas: mechaninis, pavarų skaičius: 6, emisijos klasė: Euro 6, pakaba: plienas-oras, sėdimų vietų skaičius: 2, bendras ilgis: 8 000 mm, bendras plotis: 2 550 mm, bendras aukštis: 3 420 mm, krovimo vietos ilgis: 6 060 mm, krovinių skyriaus plotis: 2 470 mm, krovos erdvės aukštis: 2 380 mm, Gamybos metai: 2014, Įranga: ABS, galinis keltuvas, kruizo kontrolė, oro kondicionavimas, priekabos jungtis, retarderis, trauki kontrolė,

Būklė: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 69 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 250 kN, varžto skersmuo: 45 mm, Parduodama KraussMaffei KM 125-700C2 markės liejimo mašina. Mašina yra visiškai veikianti ir buvo naudojama gamyboje iki pat paskutinių dienų. Techniniai duomenys: Pagaminimo metai: 2000 Darbo valandos: 69 000 h Uždarymo jėga: 125 t Cilindro skersmuo: 45 mm Adatinis vožtuvas: pneumatinis Iaodpfxex Ituqj Aatow Branduolio traukimas: 2x hidraulinis Vidinio slėgio jutiklis

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 600 kN, varžto skersmuo: 50 mm, darbinio tūrio: 393 cm³, Clamping force: 1600 kN Maximum tool opening force: 87 kN Movable platen opening force: 45 kN Movable platen closing force: 38 kN Clamping platen (H x V): 820 x 845 mm Clearance between tie bars (H x V): 520 x 520 mm Mould opening stroke: 650 mm Minimum mould installation height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force (forwards/backwards): 23 kN Injection unit: Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1892 bar Shot volume: 393 ccm Shot weight (PS): 358 g Injection flow rate: 177 ccm/s Screw speed: 265 rpm Plasticizing rate: 36.2 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating capacity: 16 kW Cylinder heating control zones: 5 Oil capacity: 489 ltr Dimensions and weights: Floor space approx.: 5.50 x 2.00 x 2.20 m Total weight: 8200 kg Max. mould weight: 1862 kg Accessories: - Oscillating elements Ijdpfxsy Nlb Se Aateaw - BluePower - servo pump drive Additional equipment: - 1 x air valve - 8 x hot runner control zones - 2 x core pulls at the moving platen - 2 x core pulls at the fixed platen - Robot interface according to Euromap 67

Gamybos metai: 2008, būklė: geras (naudotas), For sale is an injection moulding machine from Krauss Maffei, model KM 110-380. The machine is in good to very good condition; all maintenance and inspections have been carried out. Ijdoibyatjpfx Aateaw Technical data: Year of manufacture: 2008 Extended tie bars Pneumatic needle shut-off 2x hydraulic core pullers 31,000 operating hours Cylinder diameter: 35 mm Clamping force: 1,100 kN Mould opening force: 70 kN Euromap 63 interface for version > 1-04-09 Nitrogen accumulator available Included components: Wedge shoes with screws and nuts Double-bit key Declaration of conformity, complete control cabinet Certificate USB memory stick Mechanical ejector coupling, supplied in the control cabinet All prices plus VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or do you want to sell your machine? For more information or to contact us, please visit our website.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, veikimo valandos: 28 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 300 kN, For sale is a KraussMaffei hybrid injection moulding machine, 2-component model, type KM 130-750 CX. Ijdpou Hxm Usfx Aatoaw The machine is in very good condition, immediately operational, and has low operating hours. It features electronic injection and dosing units, as well as a hydraulic clamping unit. Technical data: Year of manufacture: 2011 Operating hours: 28,000 h Clamping force: 130 t Cylinder Ø 30 mm / 40 mm (plus 2x 50 mm additionally included) Core pull: 1x hydraulic Needle shut-off: pneumatic Tie-bar extension: 160 mm Cavity pressure transducer Selector valve Transport and loading can be organised across Europe for an additional charge upon request. All prices are subject to VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, visit our website.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036679, spaudimo jėga: 1 600 kN, varžto skersmuo: 40 mm, darbinio tūrio: 393 cm³, įpurškimo slėgis: 1,892 juosta, injekcijos svoris: 358 g, formos aukštis (min.): 200 mm, išmetimo jėga: 33 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 950 mm, įrengimo aukštis: 500 mm, bendras ilgis: 5 650 mm, bendras plotis: 1 820 mm, bendras aukštis: 1 950 mm, bendras svoris: 9 700 kg, šildymo galia: 15,5 kW (21,07 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 570 mm, įrankio svoris: 600 000 g, Injection molding machines directly from the manufacturer! As the manufacturer KraussMaffei, we are offering you our inspected and flexible stock machines: The base injection molding machine, precisionMolding, is the ideal entry-level solution for fully electric injection molding, enabling fast and innovative responses to market demands. It combines high performance, user-friendly operation, and short delivery times. It is suitable for a variety of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimized price-performance ratio for a wide range of applications – High energy efficiency through a fully electric machine concept – Fast delivery times thanks to a base machine concept with a broad range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) Iaedoyzz Irspfx Aatsw CONTROL SYSTEM • MC P1 with 15" TFT color touchscreen with multitouch functions CLAMPING UNIT • Clamping force kN 1600 • Maximum mold opening force kN 120 • Clear distance (h x v) mm 570 x 520 • Mounting plate size (h x v) mm 770 x 720 • Mold installation height min. - max. mm 200 - 500 • Opening stroke mm 950 • Maximum mold opening travel mm 450 • Ejector drive: electric • Ejector stroke mm 100 • Ejector force fwd/rev kN 33 / 33 • Ejector speed fwd/rev mm/s 300 / 300 • Maximum mold weight kg 1200 INJECTION UNIT • Screw diameter/type mm 50 / standard • Effective L/D ratio 20.2 • Injection pressure bar 1892 • Shot volume cm³ 393 • Shot weight at max. stroke for PS g 358 • Injection speed mm/s 200 • Injection flow rate cm³/s 393 • Screw drive/speed rpm 267 • Plasticizing rate (standard screw)4) g/s 36.5 • Nozzle contact force kN 42 ELECTRICAL PARAMETERS • Connected load kW 31.2 • Installed heating capacity kW 15.5 • Power supply V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet t 9.7 • Dimensions L x W x H m 5.65 x 1.82 x 1.95 ADDITIONAL FEATURES • Wear-resistant plasticizing system • BluePower full insulation of plasticizing cylinder • Open nozzle • Air valve single (BWAP) • Pneumatic hot runner control, single circuit • Electrical interface for pneumatic cascade, 4-fold • Euromap interface handling E18 + E67 • Euromap interface (central computer) E67, E77 • Water manifold 4-fold • Electrical prep for hydraulic auxiliary unit • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression function • Graphic analysis package • Swiveling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras available on request. We look forward to your inquiry.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, Bendri duomenys Matmenys (aukštis): 405 mm Matmenys Mašinos ilgis: 405 mm Spaudimo blokas Spaudimo jėga: 800 kN Iodpfxox D Ea Io Aatsaw Ši Krauss Maffei 80-220 C1 pagaminta 2001 m. Ji pasižymi 800 kN spaudimo jėga ir 55 kN formos atidarymo jėga. Komplekte yra robotas, tačiau yra vakuumo gedimas. Puikiai tinka tiems, kurie nori sustiprinti savo įpurškimo liejimo gamybinius pajėgumus. Norėdami gauti daugiau informacijos apie šį įrenginį, susisiekite su mumis. Pritaikymo tipai Įpurškimo liejimas

Gamybos metai: 1999, būklė: paruoštas naudoti (naudotas), Parduodama dviejų komponentų liejimo mašina Krauss Maffei Multinject. Užspaudimo jėga: 3500 kN, plokščių matmenys X/Y: 1280 mm/1190 mm, antrasis agregatas: 390CZ. Mašinos matmenys X/Y/Z: apie 6300 mm/2000 mm/3100 mm, svoris: apie 17000 kg, valdymas: Krauss Maffei MC4, darbo valandos: 78424 h. Valdymas sugedęs. Dokumentacija yra. Apžiūra vietoje galima. Iasdoxx Uf Aspfx Aatsw

Gamybos metai: 2000, būklė: paruoštas naudoti (naudotas), Two Krauss Maffei injection moulding machines available: 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions (L/W/H): approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control system: MC4, operating hours: approx. 86,000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions (L/W/H): approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control system: MC4, operating hours: approx. 82,000h. Documentation available. Inspection on site possible. Iedow Emybopfx Aatsaw

Būklė: naudotas, Gamybos metai: 2005, Technical details: Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS Clamping force: 6,500 kN Approx. machine weight: 32 t From serial production Iaedpfx Astunccsatow

Būklė: geras (naudotas), Gamybos metai: 2002, spaudimo jėga: 1 100 kN, Gamintojas: KraussMaffei Kunststofftechnik München Modelis: KM 110-390 C2 Ijdpfx Aaeytipasteaw Mašinos Nr.: 1141268 Užsakymo numeris: 646749/1 Pagaminimo metai: 2002 Uždarymo jėga: 1100 kN Uždarymo jėga: 110 t Tarptautinis dydžio žymėjimas: 390 C2 / 110 Liejimo agregato dydis: 390 Darbinė įtampa: 400 V Fazės: 3 Dažnis: 50 Hz Bendroji srovė: 164 A Pagrindinis saugiklis: 200 A Variklio srovė: 37 A Mašinos svoris: 5800 kg Vieta: Freiburgas

Būklė: geras (naudotas), Gamybos metai: 1999, spaudimo jėga: 650 kN, Gamintojas: KraussMaffei Kunststofftechnik München Iajdpfsytik Rsx Aatjw Modelis: KM 65-160 C2 Uždarymo jėga: 650 kN Mašinos Nr.: 641070 Užsakymo numeris: 643883/1 Pagaminimo metai: 1999 Tarptautinis dydžio žymėjimas: 160 C2 / 65 Darbinė įtampa: 400 V Fazės: 3 Dažnis: 50 Hz Bendroji srovė: 153 A Pirminis saugiklis: 160 A Maks. variklio srovė: 30 A Mašinos svoris: 3200 kg Vieta: Freiburg

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036946, spaudimo jėga: 800 kN, varžto skersmuo: 40 mm, darbinio tūrio: 201 cm³, įpurškimo slėgis: 1 860 juosta, injekcijos svoris: 183 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 850 mm, bendras svoris: 5 600 kg, šildymo galia: 11,5 kW (15,64 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 735 mm, įrankio svoris: 600 000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for fully electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short lead times. Suitable for a wide range of applications, such as the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Short delivery times made possible by the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM - MC P1 with 15" TFT colour screen featuring multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Clear width (h x v): mm 470 x 420 - Mounting plate (h x v): mm 610 x 560 - Mould installation height min. - max.: mm 150 - 400 - Opening width: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force fwd/rev: kN 22 / 22 - Ejector speed fwd/rev: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter / type: mm 40 / standard - Effective L/D ratio: 20.0 Iajdpfxsud H Dmj Aatsw - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke (PS): g 183 - Injection speed: mm/s 200 - Injection flow: cm³/s 251 - Screw drive / speed: 1/min 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS - Net weight (with control cabinet): t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising system - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot-runner shut-off, single - Electrical interface for cascade control, 4x - Euromap interface for handling, E18, E63 - Euromap interface (central computer), E67, E77 - Water manifold, 4x - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression moulding control - Graphics analysis package The machine is located at our Parsdorf facility and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61037337, spaudimo jėga: 800 kN, varžto skersmuo: 30 mm, darbinio tūrio: 113 cm³, įpurškimo slėgis: 2 500 juosta, injekcijos svoris: 103 g, formos aukštis (min.): 400 mm, išmetimo jėga: 22 600 N, išstūmimo eiga: 150 mm, atvērimo eiga: 900 mm, bendras ilgis: 3 960 mm, bendras plotis: 1 480 mm, bendras aukštis: 2 020 mm, bendras svoris: 3 550 kg, šildymo galia: 10,9 kW (14,82 AG), pavaros tipas: Hadraulisch, laisvas tarpatramis: 470 mm, įrankio svoris: 1 000 000 g,

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036936, spaudimo jėga: 800 kN, varžto skersmuo: 35 mm, darbinio tūrio: 135 cm³, įpurškimo slėgis: 1 837 juosta, injekcijos svoris: 123 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 820 mm, bendras svoris: 5 900 kg, šildymo galia: 8,9 kW (12,10 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 470 mm, įrankio svoris: 600 000 g, Injection moulding machines direct from the manufacturer! As manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, straightforward operation, and short delivery times. This machine is suitable for a wide range of applications, including the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, year 2023) CONTROL SYSTEM  MC P1 with 15" TFT colour screen featuring multi-touch capabilities CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platens (h x v) mm 610 x 560  Minimum – Maximum mould height mm 150 – 400  Max. opening width mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forward/back kN 22 / 22  Ejector speed forward/back mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke (PS) g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticising rate (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8 Ijdouggb Djpfx Aatjaw  Installed heating capacity kW 8.9  Power supply V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticising  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve 1-fold (BWAP)  Pneumatic control hot runner shut-off 1-fold  Electrical interface for cascade control 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces for handling E18, E63  Euromap interface (central computer) E67, E77  Water manifold 4-fold  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression moulding function  Graphics analysis package  Swivelling device for injection unit The machine is located at our site in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036721, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, tarpas tarp stulpų: 1 110 mm, darbinio tūrio: 1 078 cm³, įpurškimo slėgis: 1 877 juosta, injekcijos svoris: 981 g, atvērimo eiga: 3 200 mm, plokštės aukštis: 1 540 mm, pavaros tipas: Hydraulisch, laisvas tarpatramis: 3 200 mm, įrankio svoris: 2 200 000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you here our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. The sophisticated GuideX sliding shoe perfectly absorbs forces and extends the lifetime of the moulds. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly and highly stable in value. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT colour display with multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Max. mould open force kN 455 - Tie bar spacing (h x v) mm 1110 x 960 - Platen size (h x v) mm 1540 x 1440 - Mould installation height min.-max. mm 1550 (without center platen) - Daylight mm 3200 - Max. opening stroke mm 1650 Iasdpow U N Ixofx Aatsw - Max. mould weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter/type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight max. stroke PS g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticising rate g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter/type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight max. stroke PS g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticising rate g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL SPECIFICATIONS - Connected load kW 341 - Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mould heating 96-fold (3.5 kW) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical center platen - Parallel clamping and opening movement during injection process with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface—signal interface for connecting an RPM system - Electrical interface for HRS Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/reject part separation The machine is located at our factory in Parsdorf and is available at short notice. Additional options available upon request. We look forward to your enquiry.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 30 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 000 kN, varžto skersmuo: 95 mm, darbinio tūrio: 3 367 cm³, Clamping force: 8000 kN Maximum tool opening force: 560 kN Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate (H x V): 1600 x 1550 mm Clear space (H x V): 1120 x 1000 mm Mould opening stroke: 1600 mm Mould installation height min./max.: 500 / 1100 mm Maximum opening width: 2100 mm Ejector stroke: 300 mm Ejector force fwd/rev: 200/100 kN Injection Unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection rate: 690 ccm/s Screw speed: 116 rpm Plasticising rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic Equipment: Pump motor rated power: 90 kW Iasdpfoymn Rvox Aatew Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil capacity: 1500 ltr. Dimensions and Weights: Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44500 kg Max. mould weight: 12200 kg Accessories: - Vibration-damping elements Additional equipment: - 1 x air valve - Tie bar retraction device - 3 x hydraulic core pullers at moving platen - 2 x hydraulic core pullers at fixed platen - 20 x hot runner control zones - Robot interface according to Euromap 67

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, KRAUSS MAFFEI 1000 liejimo mašina Markė: Krauss Maffei Modelis: KM 1000 - 8100 MX Užspaudimo jėga: 1000 t Plastifikavimo galingumas: 144 g/s Įpurškimo talpa: 5453 cm3 Sraigto skersmuo: 115 mm Horizontalus kolonų atstumas: 1400 mm Vertikalus kolonų atstumas: 1150 mm Plokštės plotis: 1960 mm Plokštės aukštis: 1710 mm Min./maks. formos storis: 500/1200 mm Metai: 2006 Iaodpfxszg Uzys Aatsw

Būklė: naudotas, Gamybos metai: 2006, Liejimo mašina Krauss Maffei KM 800-4300 MX, 2006 m. Mašina komplektuojama taip: - 5 hidraulinės kaskadinės valdymo sistemos - Įpurškimo agregatas su 90 Isdpfx Asw Hwr Deatsaw - MT5 valdymo sistema - Krauss Maffei tvarkymo sistema - 2 konvejeriniai juostos

Būklė: naudotas, Gamybos metai: 2004, Krauss Maffei KM125-390 C2 (pagaminimo metai 2004) Uždarymo jėga: 125 kN Darbo valandos: apie 63 000 val. Mašiną galima apžiūrėti bet kuriuo metu Iedpfx Aaew D Rmioteaw

Būklė: naudotas, Gamybos metai: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Iodpfew Hwthox Aateaw

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 50 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 000 kN, varžto skersmuo: 95 mm, darbinio tūrio: 3 367 cm³, įpurškimo slėgis: 1 795 juosta, atvērimo eiga: 2 100 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 8,000 kN Maximum mold opening force: 560 kN Moving platen opening force: 89 kN Moving platen closing force: 92 kN Clamping plate dimensions (h x v): 1,600 x 1,550 mm Clear space (h x v): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Maximum mold weight: 12,200 kg Opening width: 2,100 mm Ejector stroke: 300 mm Ejector force forward/reverse: 200/100 kN Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Stroke volume: 3,367 cm³ Shot weight (PS): 3,064 g Injection flow: 690 cm³/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN MACHINE DETAILS Dimensions & Weight Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Pump motor rated power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Iodpfx Aajyv Acmotoaw Oil capacity: 1,500 l Operating hours: 50,000 h EQUIPMENT Oscillation elements 1 x air valve Tie-bar pulling device 3 x hydraulic core pulls on moving platen 2 x hydraulic core pulls on fixed platen 20 x hot runner control zones Robot interface according to Euromap 67

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, Stock No. 13602 Manufacturer: Krauss Maffei Machine Type: KM 650 – 8000 CM Year of Manufacture: 1997 Operating Hours: 80,000 h Control System: MC 3-F Screen Language: German Location: D-52249 Eschweiler Clamping Unit: Clamping Force: 6,500 kN Max. Mold Opening Force: 346 kN Moving Platen Opening Force: 169 kN Moving Platen Closing Force: 144 kN Mounting Plate (H x V): 1704 x 1700 mm Clearance Between Tie Bars (H x V): 930 x 930 mm Mold Opening Stroke: 1,150 mm Iedpfx Ajub S R Hoateaw Min. Mold Installation Height: 600 mm Daylight: 1,750 mm Ejector Stroke: 250 mm Ejector Force fwd/back: 226 kN Injection Unit: Screw Diameter: 130 mm L/D Ratio: 20 Injection Pressure: 1,296 bar Shot Volume: 6,172 cc Shot Weight (PS): 5,617 g Injection Flow Rate: 1,540 cc/s Screw Speed: 138 rpm Plasticizing Rate: 238 g/s Nozzle Contact Force: 246 kN Electrohydraulic Equipment: Rated Pump Motor Power: 132 kW Installed Heating Capacity: 70 kW Cylinder Heating Zones: 7 Dimensions and Weight: Space Requirement approx.: 12.00 x 2.80 x 2.70 m Total Weight: 43,000 kg Accessories: - Vibration dampers Additional Equipment: - 1 x air valve - 2 x hydraulic core pulls on moving platen (BFAP) - 2 x hydraulic core pulls on fixed platen (FFAP) - 8 x hot runner control zones - Robot interface as per Euromap 67

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 68 590 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 600 kN, varžto skersmuo: 50 mm, darbinio tūrio: 393 cm³, Clamping force: 1600 kN Max. tool opening force: 87 kN Moving platen opening force: 45 kN Moving platen closing force: 38 kN Clamping platen (h x v): 820 x 845 mm Clear daylight (h x v): 520 x 520 mm Mould opening stroke: 650 mm Minimum mould installation height: 300 mm Opening width: 950 mm Ejector stroke: 150 mm Ejector force (forward/back): 23 kN Injection unit: Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1892 bar Shot volume: 393 ccm Shot weight (PS): 358 g Injection flow rate: 177 ccm/s Screw speed: 265 rpm Plasticising throughput: 36.2 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating capacity: 16 kW Cylinder heating control zones: 5 Oil capacity: 489 ltr. Dimensions and weights: Space required approx.: 5.50 x 2.00 x 2.20 m Total weight: 6600 kg Iasdpfxjydp D Ee Aatsw Max. mould weight: 1862 kg Accessories: - Oscillation elements - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 2500 mm C: 0-90° Additional equipment: - 1 x air valve - 2 x core pulls - Robot interface according to Euromap 67