Isernhäger 200 Ase pirkti naudotą (32 202)

Būklė: naudotas, Gamybos metai: 1984, sukimosi skersmuo virš skersinio stumduko: 1 600 mm, tekėjimo skersmuo: 2 000 mm, tekinimo skersmuo virš slankiojančio stalo: 2 000 mm, tekėjimo ilgis: 35 000 mm, ruošinio svoris (maks.): 63 000 kg, Centre Lathe SKODA – SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on a single bed with left and right headstocks Twin tailstock (left and right) Dual carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock on both left and right sides 3-bedway construction Chuck torque: 160,000 Nm Minimum turning diameter: Ø 315 mm Fields of Application: - Shipyards - Propeller shafts - Hydraulic cylinder shafts - Camshafts - Defence & Aeronautics - Rolls and shafts for steel mills - Crankshafts Specifications Metric Imperial Turning length: 35,000 mm Kdsdpfoynky Asx Albsl Swing over bed: Ø 2,000 mm Swing over cross slide: 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: 400 mm Quill stroke: 250 mm Spindle speed: 180 rpm Rapid traverse X-axis: 5,000 mm/min Rapid traverse Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Dimensions (approximate) Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please Note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The details are provided in good faith, but accuracy cannot be guaranteed. As such, they do not represent any warranty or contractual terms. We recommend that you verify all critical details.

Gamybos metai: 1996, būklė: naudotas, Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise clamping width: 100 mm Feed length: max. 500 mm Spindle speed: 2,800 rpm Electric milling feed via foot switch activation Profile clamping via infinitely adjustable swiveling vise. Kdodpfx Ajq Awg Ejlbol

Gamybos metai: 2024, būklė: naujas, 5-Achs-Doppelkopf-Sägemaschine FOM INDUSTRIE KEOPE E5 6,6 m Maschine auf Lager und sofort versandbereit Ausstattung: - 2 Hartmetall-Sägeblätter Ø 600 mm - Minimale Schnittleistung zwischen den beiden Köpfen: 470 mm (bei 90°-Stellung der Köpfe) - Maximale Schnittleistung zwischen den beiden Köpfen: 6,6 m - 4 vertikale und 2 horizontale Spannvorrichtungen (für Schritt-für-Schritt-Betrieb) - Mikro-Tröpfchenschmierung der Sägeblätter mit reinem Öl - Vorbereitung für Späne- und Rauchabsaugung - Sägeblattmotoren, Drehstrom 5 PS (3,7 kW) - 230/400 V - 50 Hz, Sägeblattdrehzahl: 2.400 U/min - Schwenkbereich der Köpfe zwischen 22,5° und 140° (Y- und Z-Achsen) mit elektronischer Steuerung (Vertikalachse) - Sägeblattneigung intern zwischen 90° und 45° (W- und U-Achsen) mit elektronischer Steuerung (Horizontalachse) - Verstellung des beweglichen Kopfes (X-Achse) mit elektronischer Steuerung - Maximale Geschwindigkeit des beweglichen Kopfes: 25 m/min - Hydraulischer Sägeblattvorschub (einstellbare Blattvorschubgeschwindigkeit – Schnellrücklauf) - Profilanhebungs-Kit - Zufuhrrollenbahn, Länge 2,2 m, Breite 400 mm (am beweglichen Kopf) - 3 pneumatische, versenkbare Zwischenauflagen - Späneförderband - Etikettendrucker - FSTCut-Software - Software für Sondertrennschnitte (Übermaß und Super-Mindestmaß) sowie Gehrungsschnitte für 45°-Schnitte - Stufenweise Schneidsoftware, inkl. einer Zusatzauflage am Festkopf, 90°-Schnitte, Zwei-Hand-Bedienung Kdodod Izq Hopfx Albsl - Industriesauger

Gamybos metai: 2025, būklė: naujas, XX100292 Naujas CNC apdirbimo centras su 4 valdomomis ašimis FOM INDUSTRIE FMC 470 Įrenginys sandėlyje, paruoštas išsiuntimui Standartinė komplektacija: - Skysčiu aušinamas elektrospindelis, 7 kW, 20 000 aps./min. (HSK-F63) - 9 pozicijų įrankių magazinas ant galvos (HSK-F63) - 2 poros pneumatinių spaustuvų, pozicionuojamų per judančią koloną - 2 poros žemo profilio žandikaulių plačių profilių fiksavimui - Kairysis pneumatinių atramų ribotuvas - Aliejaus minimalaus kiekio tepimas (MQL) - Centrinė automatinė tepimo sistema ir rankinio tepimo įtaisas - Drožlių ir atliekų surinkimo talpa korpuse - Perimetrinė apsaugos sistema su automatinėmis, priekyje įtraukiamomis durimis - X FLOW (automatinis tepimo purkštukų orientavimas) - Valdymas: POWER-D - Perkeliama valdymo pultas - 24” ekranas - FST CAM 4 programinė įranga Įdiegta papildoma įranga: - PR202941 Stacionarus 8 pozicijų įrankių magazinas centre, ant įrenginio pagrindo - PR202962 Įrenginys įrankių vientisumui tikrinti ir ilgiui matuoti - ZR204058 Švytuoklinis darbo režimas su keliomis detalėmis (2 darbo zonos, 4 detalės) ir nestandartinių ilgių apdirbimas su X-PAL: • Dvi papildomos nepriklausomai pozicionuojamos spaustuvų poros • Standartinių spaustuvų transformavimas į nepriklausomai pozicionuojamus spaustuvus • LED juosta • Profilių pozicionavimo programinė įranga • Apdirbimo ciklo eigos stebėjimo programinė įranga • Profilių ilgio matavimo įrenginys • Antras X-FLOW • Dešinysis pneumatinių atramų ribotuvas • Švytuoklinio darbo valdymo programinė įranga • Švytuoklinio apdirbimo saugos įrenginiai • Tunelis didelių profilių apdirbimui Kjdpfx Aljiv Imnobsdl • Programinė įranga didelių profilių apdirbimui valdyti • „Laiko“ skaičiavimo modulis - PR202971 Duomenų importo programinė įranga pagal FOM protokolą ir belaidis optinis brūkšninių/QR kodų skaitytuvas - ZP715010 Standžios ir sekamos sriegimo moduliai - PR202957 Vingiuojanti juostinė transporto priemonė su nuožulnia rampa - PR203389 Galinė drožlių surinkimo talpa - PR202975 Įrankių komplektas A3/HSK F63 - PR202967 Kampinė galva su vertikaliu Ø230 mm disku - PR202968 Kūgis su horizontaliu Ø250 mm disku - PR204497 HSKF63 tvirtintuvas su Ø200 x 6 mm freza - PR203072 Spaustuvų slėgio reguliavimo programinė įranga (3,5 – 7 bar) - ZP714611 FST CAM 4 biuro versijos licencija

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, 5-osiowa dwugłowicowa przecinarka FOM INDUSTRIE KEOPE E5 6,6 m Rok produkcji: 2019 Stan: doskonały, jak nowa Dane techniczne i wyposażenie maszyny (standard oraz opcje): - 2 nowe tarcze pił widiowych FOM o średnicy 600 mm - Minimalna długość cięcia między głowicami: 470 mm (przy głowicach ustawionych pod kątem 90°) - Maksymalna długość cięcia między głowicami: 6,6 m - 4 pionowe imadła i 2 poziome (do pracy krokowej) - System mikrokropelkowego smarowania ostrza czystym olejem - Przygotowanie do odciągu wiórów i oparów - Silniki pił, trójfazowe 5 KM (3,7 kW) - 230/400 V - 50 Hz. Obroty tarczy 2400 obr./min - Obrót głowic w zakresie 22,5°–140° (osie Y i Z) z elektronicznym sterowaniem (oś pionowa) - Wewnętrzne nachylenie tarczy w zakresie 90°–45° (osie W i U) z elektronicznym sterowaniem (oś pozioma) - Przesuw głowicy ruchomej (oś X) z elektronicznym sterowaniem - Maks. prędkość ruchomej głowicy: 25 m/min - Hydrauliczny posuw piły (regulowana prędkość wysuwu tarczy – szybki powrót) - Zestaw do podnoszenia profili - Rolkowy przenośnik załadunkowy długość 2,2 m, szerokość 400 mm (przy głowicy ruchomej) - 3 pośrednie pneumatyczne podpory chowane - Przenośnik taśmowy do wiórów Kdodpfxowk R A Ds Albol - Drukarka etykiet - Oprogramowanie FSTCut - Oprogramowanie do cięć specjalnych (poza zakresem oraz minimum super) i fazowania profili dla cięć pod kątem 45° - Oprogramowanie do cięcia krokowego, komplet z 1 dodatkową powierzchnią na głowicy stałej, cięcia pod kątem 90°, sterowanie oburęczne - Odkurzacz

Būklė: paruoštas naudoti (naudotas), Spanförderer, Knoll 320 s-1/200, Gebrauchtmaschine Hersteller: Knoll Typ: 320 s-1/200 Baujahr: 2015 Gesamtmaße: 6200 x 1310 x 1610 mm Bandmaße: 500 x 1400 x 4700 mm Kdjdpjwmmltjfx Albjl Lamellenabstand: 315 mm

Būklė: paruoštas naudoti (naudotas), Drožlių transporteris, drožlių konvejeris, Knoll 320 S-1/200, naudota mašina Gamintojas: Knoll Tipas: 320 S-1/200 Bendri matmenys: Plotis: 6200 mm Gylis: 1300 mm Aukštis: 1610 mm Juostos specifikacija: 480 x 130 x 60 x 310 mm Juostos greitis: 1,8 m/min Pagaminimo metai: 2015 Išmetimo angos matmuo: 550 x 530 mm Bunkerio anga: 3120 x 410 mm Skersiniai žingsnis: 315 mm Kdodpfsxtwqdjx Albsl

Būklė: naudotas, Chip conveyor, scraper conveyor with coolant tank BMF Type KF 200 K17 ID No.: Order No.: 915979 Year of manufacture: 1992 Metal link width: 200 mm Distance between scraper bars: approx. 380 mm Possible chip discharge length: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width at top: 400 mm Hopper width at bottom: 170 mm Conveying height - Discharge height: approx. 1250 mm Drive motor output: 0.37 kW Kedpfx Ajhwt H Aslbodl Power connection: 400 Volt, 50 Hz - Drive of the scraper chain via gear motor - Coolant tank without coolant pump Required space (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor is from a GILDEMEISTER CNC lathe. This conveyor is suitable for chip removal from a milling machine, lathe, or machining centre.

Būklė: naudotas, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4, year of manufacture 1993 2 welding stations (right + left) Working area per side approx. 600 x 400 mm Table size per side approx. 1000 x 950 mm Table surface with a single station (without center wall) approx. 2000 x 950 mm - Table size of fixture change plate for welding jig setup: 300 x 600 mm - Connection cable robot to control cabinet: 5000 mm - Freestanding control cabinet with teach-in operating panel (weight approx. 300 kg) - Control cabinet ENCM-RP692 - Operating control unit YZNC-OP186 - Teach panel JZNC-T834B - Robot YRFL-NNA06WB - Automation by ECKHARDT type ROBO Robot payload: 6 kg Net weight robot only: 180 kg The overall system is designed as a compact welding cell. Robot control cabinet positioned alongside. The robot can, of course, also be equipped with a MIG-MAG welding source. Kdodpfewypqlox Albol Space requirement for welding cell with robot: L x W x H 2000 x 2000 x 2300 mm Weight of welding cell with robot: 1055 kg Space requirement for control unit with control cabinet: L x W x H 1000 x 850 x 1600 mm Weight of control unit with control cabinet: 300 kg Space requirement for the complete system: L x W approx. 3000 x 3000 mm Net weight of the complete system: approx. 1355 kg Good condition Space requirement for transport: L x W x H 3000 x 2200 x 2300 mm

Būklė: naudotas, 2-axis linear guide with linear motors – Slide Arm Pick and Place unit with linear guides for automation Loading unit similar to SCARA robot, manipulator, handling device, handling system, pick-and-place gripper, loading gripper for automation Manufacturer: SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction: approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal travel: 780 mm Nominal horizontal force: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeatability: +/- 0.05 mm Kdedpfx Alju H R Iwsbsl Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with linear motor LinMot type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical travel: 160 mm Nominal vertical force: 44 N Maximum vertical force: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeatability: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Traversable in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated position measurement - Axis modules with integrated position control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space required (L x W x H): 1120 x 720 x 740 mm Net weight: approx. 65 kg Very good condition

Būklė: naudotas, Gamybos metai: 2003, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-position tool turret VDI40 - Year of manufacture: 2003 Technical Data Capacity: - Centre height: 200 mm - Distance between centres: 1000 mm Kodpfsuwrz Hex Albjdl - Permissible Ø over bed: 400 mm - Permissible Ø over cross slide: 370 mm - Permissible Ø over compound rest: 210 mm - Bed width: 300 mm Headstock: - Main spindle bore: 65 mm - Main spindle nose: Camlock No. 6 / DIN 55027 No. 6 - Main spindle Morse taper: 5 - Spindle speed ranges: 2 - Constant cutting speed: 0–700 / 700–3000 rpm Feeds: - Working feed Z/X: 0–7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock quill diameter: 58 mm - Tailstock quill travel: 155 mm - Tailstock Morse taper: 4 Motors: - Main motor power: 7.5 kW - DC motor power Z-axis: 12 Nm - DC motor power X-axis: 4 Nm - Pump motor power: 0.57 kW Dimensions: - Machine weight: approx. 2200 kg - Dimensions (W x H x D): 2980 x 1730 x 1610 mm

Būklė: naudotas, 4-axis industrial robot, handling robot, SCARA robot, handling robot, loading robot, pick-and-place robot STÄUBLI Type TS80 + CS8C bmn Year of manufacture: 10/2011 Serial No.: F11/5JN5A1/A Year: 2011 Number of axes: 4 Handling weight (nominal load): 2 kg Handling weight (maximum load): 8 kg Arm reach: 800 mm Repeatability (X+Y): 0.01 mm Repeatability (Z): 0.004 mm Repeatability (R): 0.002° Working range axis 1: ±280° Working range axis 2: ±310° Stroke axis 3 (Z-axis): 200 mm Rotation range axis 4 (R-axis): ±500° Rated speed / maximum speed: Axis 1: 350 / 490 °/s Axis 2: 500 / 620 °/s Axis 3: 1600 / 2220 mm/s Axis 4: 1200 / 1929 °/s Axles 1 + 2: 8.11 / 10.84 m/s Robot design: Floor-mounted Controller: STÄUBLI CS8C bmn Serial No.: F11/5JN5A1/C Rated voltage: 1 x 230 VAC Rated frequency: 50 - 60 Hz Connected load: 1700 VA Kedpjvmhphjfx Albjdl Controller dimensions (W x H x D): 450 x 310 x 450 mm - Controller adjacent with removable "Teach-in" unit - Material gripper, workpiece gripper HELLA / MADER Total weight: 190 kg Installation space for transport (L x W x H): 900 x 700 x 1500 mm Very good condition.

Būklė: naudotas, Hydraulic Synchronizing Press, Die Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Tryout Press, Die Spotting Press Serial No. 21169, Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Side passage between uprights: 650 mm Table size: 1560 x 1010 mm Ram area: 1560 x 1010 mm Ram stroke: 575 mm Drawing cushion stroke: 300 mm Drawing cushion holding force: 63 tons Drawing cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column diameter: 140 mm Ram clamping bore: 64 mm Pressing speed: 0 to 10 mm/s infinitely variable Return speed: 0 to 20 mm/s infinitely variable Main motor power: 22 kW Control pump motor power: 5.5 kW Power connection: 400 Volt, 50 Hz - Table and ram with 22 mm T-slots - Two hydraulic cylinders with electronic precision synchronization control - Infinitely adjustable electric stroke limitation (top and bottom) with digital travel measurement and position display - Mechanical safety support (prevents ram from lowering due to gravity) - One-hand and two-hand operation - Electric tool safety device with signal contact - Pressure presetting independent of stroke (via keyboard with digital pressure display) - Position measuring system left and right via rotary encoder - Electric control: MS-DOS PC with Ageo H v2.23 controller software - Operator panel with swiveling monitor - Stroke movement and press speed controllable via joystick - Separate hydraulic unit with electrical cabinet Kedpowva I Hsfx Albjdl - Hydraulic drawing cushion under the press table - Drawing cushion with ejector function - Continuous stroke control - Floor-level installation - Electric oil temperature monitoring - Operating manual with wiring diagrams Space required for the press upright (L x W x H): 1800 x 1010 x 3470 mm Space required for horizontal transport (L x W x H): 3500 x 1800 x 1200 mm Press net weight: 13 tons Space required for the hydraulic power unit (L x W x H): 1000 x 800 x 3040 mm Hydraulic power unit net weight: approx. 1 ton The machine was used as a tool tryout press in a toolmaking facility. Very good condition.

Būklė: naudotas, Flexible milling cell with 6-axis industrial robot ABB - CARAT type IRC5 / IRB 2400 M2004 Robotic milling system with rotary index table featuring 2 workstations, robotic cell Kdsdpfeyaq Nuox Albol Serial no. 24-51541, Year of construction 2006 6-axis industrial robot ABB type IRB 2400/16 M2000 Control system ABB type IRC5 with Tech-In panel High-frequency milling spindle PERSKE type KRS 35.3-2, power 1.2 kW, speed 17,400 to 23,200 rpm Robot handling capacity: 16 kg Robot net weight: 380 kg Table size (table 1) with aluminum table plate: 500 x 500 mm Table size (table 2) with Pertinax table plate: 600 x 600 mm Power connection: 400 VAC, 50 Hz - High-frequency spindle equipped with collet chuck - Complete system designed as a compact milling cell with interchangeable table - Control cabinet and robot control cabinet, both compactly and firmly mounted on the milling cell - Motorized rotary indexing table (presumably WEISS make) with fixed index = 2 stations = 180° - Rotary table, rotation angle 180°, with partition wall and two clamping surfaces for fixtures - Parallel to the milling cycle, one side of the rotary table can be loaded with new workpieces - Front safety guard with light barrier for monitoring during 180° table rotation Required space: Length 500 cm x Width 190 cm x Height 252 cm Length with front safety guards: 500 cm Length without front safety guards: 400 cm Weight of milling cell approx. 4,000 kg Very good condition The milling cell was used as a machining center for milling aluminum sheets and deep-drawn aluminum parts. Edge finishing, milling of cutouts, drilling, etc. Also suitable for plastic machining or similar operations. If interested, please request a video from us.

Būklė: naudotas, Double-column hydraulic press SMG Type HBP 200 - 2000 / 2000 Serial No. 7.4117 Year of manufacture 1986 - Retrofit 2000 Pressing force: 200 tons Ksdpfx Alsdzp Tcebodl Column distance (front): 2050 mm Column clearance (side): 2030 mm Table size: 2800 x 2000 mm Ram size: 2000 x 2000 mm Ram stroke: 700 mm Maximum installation height: 1850 mm Table height above floor: 750 mm Ram return force: 33 tons Rapid advance speed: 500 mm/s Pressing speed: 72/36 mm/s Return speed: 420 mm/s Safety distance: 230 mm Main motor power: 75 kW Control pump motor power: 11 kW Power connection: 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Position measuring system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Free-standing control cabinet - Two-hand control panel, placed alongside - Floor-level installation - Central lubrication - Operating manual with circuit diagrams Required installation space (L x W x H): 3700 x 2900 x 5900 mm Total machine height including motor: 5900 mm Space required for transport (horizontal L x W x H): 5900 x 3250 x 2950 mm Weight: 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000 onwards, it was used as a die tryout press in a tool shop. Good condition.

Būklė: naudotas, 3-axle truck trailer, low-bed trailer MÜLLER MITTELTAL type AZP Kdedpfot N Antjx Albsl Curtainsider low loader, low-bed trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight rating: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at platform height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and sliding tarp advanced) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle is a lift axle - Drawbar – telescopic, adjustable in several stages - Very robust lashing eyes on outer frame and vehicle center - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge €2,000 net) The vehicle was purchased new by us, i.e. from first ownership. The trailer has been deregistered since 2025.

Gamybos metai: 1996, būklė: naudotas, Riedama drožlių ištraukimo sistema aliuminiui arba PVC Kodpfx Asy Tanhelbodl

Būklė: reikia remonto (naudotas), Gamybos metai: 2009, 5 ašių CNC apdirbimo centras - universalus - Gamintojas: RÖDERS Staklių modelis: RXP 800 DS Pagaminimo metai: 2009 Kdodpfx Asy Smvcjlbol TECHNINIAI DUOMENYS Judėjimo ribos - X ašis: (mm) 475 - Y ašis: (mm) 600 - Z ašis: (mm) 400 - A ašis (pasukamasis stalas): +/- 95 - C ašis (sukamasis stalas): 360 ĮRANGA + RC 4 automatizacija + Drožlių transporteris

Būklė: naudotas, Parduodu nuotraukoje matomą Haas HRT310 dalijimo galvutę, įrenginys veikiantis. Ksdpfey Rvd Tjx Albedl

Būklė: naudotas, Gamybos metai: 2014, Naudota mašina Pagaminimo metai: 2014 Ksdpfxex Hllxs Albjdl Įranga ir techniniai duomenys: - Darbinis plotas X: 3 740 mm - Darbinis plotas Y: 1 570 mm - Darbinis plotas Z: 350 mm - 4-a ašis: yra - 5-a ašis: 5 ašių verpstė, variklis 12 kW - Su papildomu C ašies užraktu - Įrankių keitimo vietos: 24 su lėkšteliniu keitikliu; 10 mašinos stovo kairėje pusėje - Vertikalios gręžimo verpstės: 12 - Mašinos stalas: konsolinis stalas - Stalo pozicionavimo automatas: yra - 6 ruošinio atramos tipo e-motion - Speciali ruošinio prispaudimo sistema rėmams - Programinė įranga: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 apdirbimo laukai svyruojančiam užkrovimui - Su automatine centrine tepimo sistema - Su mobiliu valdymo pultu su PC monitoriumi - Su valdymo spintos kondicionieriumi - Su vakuuminiu siurbliu 90 m³/h - Su rankiniu valdymo įrenginiu - Įskaičiuota: 12 rėmo spaustuvų, 8 dideli ir 4 vidutiniai siurbtukai Prieinamumas: greitas Vieta: Röllbach

Būklė: labai geros būklės (naudotas), Parduodama universali frezavimo staklė WAGNER FCA 500 labai geros techninės būklės. Vokiškos tvirtos konstrukcijos įrenginys, komplektuojamas su 3 ašių skaitmeniniu atvaizdavimu (DRO), kuris žymiai palengvina tikslius apdirbimo darbus. Frezavimo staklės idealiai tinka įrankių dirbtuvėms, vienetinei gamybai ir serviso darbams. Techniniai duomenys: Kdjdpfx Aljyrhb Ssbsl • Gamintojas: WAGNER Maschinen • Modelis: FCA 500 • Pagaminimo metai: 2004 • Skaitmeninis atvaizdavimas SINO – 3 ašys (X, Y, Z) • Velena greitis iki 2000 aps./min • Maitinimas 380 V • Dažnis 50 Hz • Bendra galia 6,5 kW Įranga: • Vertikali frezavimo galva • SINO skaitmeninis atvaizdavimas • Greičio reguliavimas • Didelis darbastalis su T formos grioveliais Pilnas įrenginys, geros techninės būklės, matomi natūralūs naudojimo žymės.

Būklė: naudotas, 1 vnt. dvigubas šlifavimo stovas AEG DWSL 200/500 Spalva: kaip parodyta nuotraukose ir apžiūrint Būklė: naudotas Kdedpfx Aloy Th Ivjbjl

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, veikimo valandos: 44 590 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 200 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 2 000 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 000 kg, alyvos bako talpa: 3 100 l, tuščias svoris: 50 800 kg, paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 795 m³/val, Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of Manufacture: 2002, partially overhauled in December 2025 Operating Hours: 44,590 hours (as of December 2025) Main Press Force: 200 t Specific Press Force: 16.5 kg/cm² Feed Hopper Dimensions: 2,000 x 1,020 mm Filling Volume: 2.65 m³ Kdjdoy S Rrujpfx Albsl Theoretical Throughput Capacity: 795 m³/hour Bale Dimensions: 1,100 x 1,100 mm, length variable Drive Power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Throughput for MSW: approx. 48 to 54 t/hour, depending on material Hydraulic Oil Tank Capacity: 3,100 L Machine Weight (Press): approx. 50.8 t Scope of Supply: 1 unit baler MACPRESSE, type 111A 1 unit operating manual with CE declaration, electric and hydraulic circuit diagrams Remarks: The machine has been serviced and partially overhauled in our workshop. The following work was carried out, and parts replaced: • Hydraulic oil tank completely emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram disassembled, dismantled into individual parts, mechanics serviced • Replacement of the front two main running rollers • Replacement of knives on the press ram • Main hydraulic cylinder disassembled, dismantled, cylinder tube and piston rod checked, complete seal kit replaced • Replacement of the counter-knife in the frame • Adjustment of knife clearance to approx. 3 mm • Upper steel guide rails in the frame (left and right) replaced • Removal of worn press floor, replacement of floor plate with wear-resistant HARDOX steel • Tying and twisting unit disassembled, dismantled into individual parts, mechanics serviced, all twister shafts and ball bearings replaced • Replacement of all wire rollers in the needle heads • Wire cutters cleaned and readjusted, chains greased and tensioned • All wire guide rollers serviced • All door contact switches replaced • Twister unit disassembled, dismantled, and serviced • General maintenance performed Finally, the baler was tested in both manual and automatic mode. Please refer to the function test video for further details. All documentation (Operating Manual, CE Declaration, Electrical/Hydraulic Schematics) is complete. Inspection by appointment is possible. We accept no liability for technical specifications or possible errors.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, Iš karto laisva iš Šveicarijos įrankių gamybos: 5 ašių frezavimo staklės Deckel Maho Tipas: DMU 35 M Metai: 2000 Kodpfoy Tmwiox Albedl CNC valdymas: Heidenhain TNC 310 M Elektroninis rankinis ratas Stalas: 400 x 280 mm Stalo apkrova iki 100 kg Eigos X/Y/Z: 350/240/340 mm Veleno apsukos be pakopų: 0–5000 aps./min Tvirtinimas: SK 40 Greitas žingsnis: 5 m/min Servo varikliai X/Y/Z ašims Sukimosi diapazonas: 360 laipsnių Stalo fiksacija: +105/–150 laipsnių Svoris: 2 t Įrankių laikikliai, hidraulinis spaustuvas Kaina: 5 000 Eur + PVM vietoje

Būklė: labai geros būklės (naudotas), Prekės pavadinimas: HOFMANN RW/NC-220/320L 4-oji ašis ----- Prekės būklė: Gera naudota būklė. Pašalintas iš Matec staklių. Kedpfxsy S Tzre Albsdl Vidinis numeris: 26.368