Hesse By Coiltech Cmc S 2500 400 M D1300 pirkti naudotą (109 764)

Būklė: naujas, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €97,400 Klsdpfx Aoynm Enjfneu Leasing rate: €1,840.86 Bending length: 2050 mm Max. bending capacity - mild steel: 30 mm Max. plate thickness without prebending at D = 5x upper roll: 30 mm Max. plate thickness without prebending at D = 1.5x upper roll: 25 mm Max. plate thickness with prebending at D = 5x upper roll: 25 mm Max. plate thickness with prebending at D = 1.5x upper roll: 20 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5 - 5 m/min Motor power: 22 kW Length: 5000 mm Width: 2000 mm Height: 1900 mm Weight: 11,000 kg 4 rolls Fully hydraulic drive of upper and lower roll Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of the upper roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the nominal capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2050 mm Maximum bending capacity (mild steel): 16 mm Max. plate thickness without pre-bending at D = 5x top roll: 16 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 13 mm Max. plate thickness with pre-bending at D = 5x top rolls: 13 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1550 mm Weight: 6100 kg Four rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Kjdpfx Aoynm Ehjfnslu Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Hydraulic drop-end bearing Two working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: - Infinitely variable rolling speed - Hydraulic side support - Hydraulic top support - NC control IMPORTANT POINTS FOR CONICAL ROLLING: - Maximum plate thickness for conical rolling is 50% of rated capacity - Cone length must be max. 30% or more than 60% of roll length - Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €111,500 Leasing rate: €2,107.35 Bending length: 3,100 mm Max. bending capacity – carbon steel: 20 mm Max. plate thickness without pre-bending at D=5x top roll: 20 mm Max. plate thickness without pre-bending at D=1.5x top roll: 16 mm Max. plate thickness with pre-bending at D=5x top roll: 16 mm Max. plate thickness with pre-bending at D=1.5x top roll: 12 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 6,000 mm Width: 2,200 mm Height: 1,900 mm Weight: 15,000 kg 4 rolls Fully hydraulic drive for top and bottom rolls Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Device for conical bending Ksdpoynm Ebjfx Afnolu Hydraulic relief of top roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONE ROLLING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 260 mm Bottom roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,550 mm Weight: 7,685 kg 4 rolls Top roll drive via hydraulic motor and planetary gearbox, bottom roll drive via gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end 2 working speeds Overload protection Movable control console Equipment compliant with CE regulations OPTIONS: Infinitely variable rolling speed Klodpfx Aoynm D Rsfnou Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity Cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 12-14 weeks ex works Country of origin: Turkey Price: €72,300 Leasing rate: €1,366.47 Pressing force: 40 t Bending length: 1,250 mm Axes: Y1 / Y2 / X and R axis Stroke: 200 mm Distance between frames: 1,050 mm Side frame throat: 250 mm Installation height: 440 mm Drive concept: servo-motorized ball screw Rapid traverse Y-axis: 115 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 115 mm/s Backgauge travel X-axis: 650 mm Backgauge travel R-axis: 250 mm Table height: 1,000 mm Motor power: 7.2 kW Length: 1,950 mm Width: 1,450 mm Height: 2,650 mm Weight: 3,600 kg STANDARD EQUIPMENT: - Servo-motorized ball screw drive - 4 axes (Y1, Y2, X, and R) - DELEM DA-66S color graphic CNC control - 17" color touchscreen - 3D visualization for simulation and production - Compatible with full Windows applications - Compatible with DelemModusys - USB and peripheral interface - User-specific application support - Sensor, bending, and correction interfaces - Servo-motor driven backgauge with linear guides and ball screws - CNC-controlled crowning system - Upper tool 1010/A/75°, segmented and offset - 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) - Fiessler AKAS laser safety device mounted on upper beam - Sheet support arms on linear guides - Equipment conforms to CE regulations - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Higher productivity than conventional hydraulic press brakes thanks to virtually delay-free response to the foot pedal signal Kodpoynm Ayofx Afnelu - Low energy consumption - Compact drive spindle unit with minimal number of components - No hydraulic components Options: - Z1/Z2 axes - DELEM DA-69S 3D CNC control incl. Profile-S PC software with 3D file import capability - Quick-clamping lever for upper tooling

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €127,400 Leasing rate: €2,407.86 Press force: 220 tons Bending length: 4,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between uprights: 3,600 mm Throat depth: 410 mm Installation height: 530 mm Drive concept: hydraulic Rapid traverse Y-axis: 200 mm/s Working speed Y-axis: 12 mm/s Return speed Y-axis: 180 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Length: 5,250 mm Width: 1,770 mm Height: 2,900 mm Weight: 15,000 kg ONE SERVO MOTOR AND PUMP PER CYLINDER Standard equipment: - 4 axes (Y1, Y2, X and R) - CNC control SKY 22 - Full HD graphic display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of bending contours with your finger) - User-friendly programming in dialogue mode, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the developed length for sheet metal blank - Automatic bending sequence calculation - Graphic product and tool memory - Correction function - USB ports and Ethernet interface for import, backup and program outsourcing - Windows operating system - Import support for IGES, STEP, DXF files - Servo motor-driven backgauge on linear guides and ball screws - Backgauge finger blocks on double linear guides - CNC-controlled crowning - Upper tool 1010/A/75°, segmented and offset - 4-V die block 60x60 2009 (V = 16, 22, 35 and 50 mm) - Laser safety device Fiessler AKAS mounted on upper beam - Sheet support arms on linear guides - Equipment compliant with CE directives - Oil filling - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - The hydraulics run only during upper beam movement - Low energy consumption Kedpfoynm Amox Afnslu - Low noise emission - High speed Options: - Z1/Z2 axes - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D including PC software Profile-S with 3D file import function - Quick-clamp levers for the upper tool

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Kodpfjynmzpox Afnslu Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without prebending at D = 5x top roll: 9 mm Max. sheet thickness without prebending at D = 1.5x top roll: 7 mm Max. sheet thickness with prebending at D = 5x top roll: 7 mm Max. sheet thickness with prebending at D = 1.5x top roll: 5 mm Top roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower rolls driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE standard OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of rated capacity The cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2050 mm Max. bending capacity – mild steel: 20 mm Max. plate thickness without pre-bending at D = 5x top roll: 20 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 16 mm Max. plate thickness with pre-bending at D = 5x top roll: 16 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 12 mm Top roll diameter: 280 mm Bottom roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4350 mm Width: 1700 mm Height: 1850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic relief for the top roll Hydraulic drop-end bearing 2 working speeds Kledpfx Aoynmylsfneu Central lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS (PRICES ON REQUEST): Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity - mild steel: 10 mm Max. plate thickness without pre-bending at D = 5x top roll: 10 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 8 mm Max. plate thickness with pre-bending at D = 5x top roll: 8 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 6 mm Top roll diameter: 200 - 220 mm Bottom roll diameter: 200 - 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor output: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of the top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment compliant with CE regulations OPTIONS: Kodpfx Asynmyfefnelu Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The maximum sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Kedsynmx Iopfx Afnjlu Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roll: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 220 mm Lower roll diameter: 200 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll unloading Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of rated capacity The cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Gamybos metai: 2024, Būklė: nauja Pagaminimo metai: 2024 Sandėlio numeris: 7321 Pristatymo laikas: iš karto, galima tarpinė prekyba Kilmės šalis: Turkija Kaina: 12 500 € Lizingo įmoka: 216,96 €/mėn. Sandėlyje: 1 vnt. Speciali kaina: 11 300 € Presavimo jėga: 150 t Cilindras: fiksuotas arba horizontaliai stumdomas Eiga: 300 mm Laikiklio tarpas: 1570 mm Stūmoklio skersmuo: 280x200 mm Kljdpfx Afswiqp Usnju Darbo greitis: 5 mm/s Grąžinimo greitis: 10 mm/s Ilgis: 2630 mm Plotis: 1000 mm Aukštis: 2480 mm Svoris: 2100 kg Horizontaliai stumdomas cilindras su užrakinimo svirtimi Plieno suvirinta konstrukcija Laisvai pasirenkama sustojimo pozicija Slėgio indikatorius Apsauginis vožtuvas nuo perkrovos 2 V formos prizmai Aukštis reguliuojamas stalas Stalo pakėlimo – nuleidimo mechanizmas Valdymas valdymo svirtimi Atitinka CE reikalavimus Naudojimo instrukcija vokiečių ir anglų kalbomis

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €51,600 Leasing rate: €975.24 Cutting length: 3,080 mm Max. sheet thickness - mild steel: 6 mm Max. sheet thickness - stainless steel: 4 mm Throat depth (side stand): 350 mm Strokes per minute: 20 Cutting angle: 0.5 - 2° Number of hold-downs: 16 Hold-down pressure: 20 t Back gauge: 1,000 mm Back gauge speed: 200 mm/s Motor power: 11 kW Oil tank: 125 l Support arms: 3 pcs. Table height: 820 mm Table width: 494 mm Table length: 3,280 mm Length: 4,100 mm Width: 2,050 mm Overall width with support arm and rear safety guard: 3,650 mm Height: 1,950 mm Weight: 7,980 kg Sliding carriage design CNC touchscreen control D-touch 7 for back gauge, cutting angle, cutting gap, cutting length, quantity USB port Cutting line illumination Foldable ball screw for back gauge Ball transfer inserts in table Klsdpfxswirwts Afnsu Foldable finger guard, 1,000 mm Side stop with T-slots, tilting stop and scale 3 support arms with T-slots Oil filling Light barriers at machine rear Operating manual in GERMAN and ENGLISH

Būklė: naujas, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €145,000 Lease rate: €2,740.50 Cutting length: 6080 mm Max. sheet thickness – mild steel: 6 mm Max. sheet thickness – stainless steel: 4 mm Throat depth in side frame: 350 mm Strokes per minute: 10 Cutting angle: 0.5 – 2° Number of hold-downs: 29 Hold-down pressure: 20 t Backgauge: 1000 mm Backgauge speed: 200 mm/s Motor power: 22 kW Oil tank: 200 l Support arms: 5 pcs. Table height: 900 mm Table width: 630 mm Table length: 6370 mm Length: 7300 mm Width: 2150 mm Total width incl. support arms & rear safety guard: 3400 mm Kledewiqygepfx Afnsu Height: 2750 mm Weight: 25,500 kg Ram design CNC touchscreen control D-touch 7 for backgauge, cutting angle, gap, cutting length, quantity USB port CNC-controlled gap adjustment via table (patented) Oil cooler Manual central lubrication Cutting line illumination Foldable ball screw for backgauge Balls in table Folding finger guard, 1,000 mm Side gauge with T-slots, flip stop and scale 5 support arms with T-slots Filled with oil Light barriers at rear of machine Operating manual in GERMAN and ENGLISH PRICE FCA TURKEY (Symbol image)

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 8 savaites nuo užsakymo Kilmės šalis: Turkija Kaina: 8700 € Lizingo įmoka: 167,91 € Peilio ilgis: 250 mm Lakšto storis (420 N/mm²): 6 mm Lakšto storis (600 N/mm²): 3 mm Eigos skaičius: 25/min Kampas: 90° Variklis: 4 kW Ilgis: 950 mm Plotis: 780 mm Aukštis: 1115 mm Svoris: 585 kg Hidraulinė pavara Kljdpfx Afowiqlvsnju Automatinis pjūvio tarpo reguliavimas 2 prispaudėjai 2 kampu reguliuojami atmušai Apsauga iš organinio stiklo Pėdos pedalas Atliekų dėžė Įranga pagal „CE“ direktyvas Vartotojo instrukcija vokiečių ir anglų kalbomis

Būklė: naujas, Condition: new Delivery time: approx. 12-14 weeks from order Country of origin: Turkey Price: €92,100 Leasing rate: €1,740.69 Cutting length: 3,100 mm Max. sheet thickness – mild steel: 16 mm Max. sheet thickness – stainless steel: 10 mm Throat depth (side frame): 350 mm Strokes per minute: 10 Cutting angle: 2° Number of hold-downs: 14 Hold-down pressure: 61 t Backgauge: 1,000 mm Backgauge speed: 200 mm/s Motor power: 37 kW Oil tank: 410 l Support arms: 2 pcs. Table height: 818 mm Table width: 550 mm Table length: 3,580 mm Length: 4,550 mm Width: 2,250 mm Total width incl. support arm and rear safety guard: 3,825 mm Height: 2,250 mm Weight: 15,000 kg Swing cut design NC pre-selection control D-Touch 7 with touchscreen for backgauge, cutting length, piece count, USB connection Motorized backgauge up to 1,000 mm on ball screw spindles, tiltable Clear control panel mounted on swing arm Hydraulic hold-downs arranged close to the cutting edge Foot switch Central manual blade gap adjustment Cutting line illumination Wide support table with ball transfers Piece counter Single and continuous stroke Tiltable finger guard 1,000 mm 1 side stop 1,500 mm with scale, T-slot, and cam 2 sheet support arms 1,000 mm with T-slot Easy blade change and regrinding Adjustable cutting length for efficient operation Lower blade can be used on 4 sides Upper blade can be used on 2 sides Kodjwir Dyjpfx Afnelu Oil filling Light barriers at the rear of the machine Qualified customer service Operating instructions in GERMAN and ENGLISH Equipment in accordance with CE regulations (Symbolic photo) WE HAVE MORE THAN 850 REFERENCES!

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 12 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 10 000 € Lizingo įmoka: 193 € Spaudimo jėga: 100 t Cilindras: fiksuotas arba horizontaliai perstumiamas Eiga: 300 mm Atvira stovo tarpas: 1570 mm Stūmoklio skersmuo: 220x160 mm Darbinis greitis: 5 mm/s Grįžtamoji eiga: 10 mm/s Ilgis: 2630 mm Plotis: 1000 mm Aukštis: 2430 mm Svoris: 1600 kg Horizontaliai perstumiamas cilindras su užspaudimo svirtimi Plieninė suvirinta konstrukcija Kedpfxowirtue Afnjlu Bet kokia sustabdymo padėtis Slėgio indikatorius Apsauginis vožtuvas nuo perkrovos 2 V formos prizmai Reguliuojamo aukščio stalas Stalo pakėlimo-nuleidimo įtaisas Valdymas svirtimi Įranga pagal CE reikalavimus Eksploatavimo instrukcija VOKIEČIŲ ir ANGLŲ kalbomis

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Ksdpfx Afswir D Honjlu Country of origin: Turkey Price: €68,700 Leasing rate: €1,298.43 Cutting length: 3,100 mm Max. sheet thickness – mild steel: 13 mm Max. sheet thickness – stainless steel: 8 mm Throat depth (side frame): 50 mm Strokes per minute: 13 Cutting angle: 1.75° Number of hold-downs: 16 Hold-down pressure: 37 tons Backgauge: 1,000 mm Backgauge speed: 200 mm/s Motor power: 30 kW Oil tank: 330 l Support arms: 2 pcs. Table height: 840 mm Table width: 600 mm Table length: 3,550 mm Length: 4,280 mm Width: 2,300 mm Total width incl. support arm and rear safety guard: 3,600 mm Height: 2,350 mm Weight: 12,500 kg Swing beam design NC preselection control D-Touch 7 with touchscreen for backgauge, cutting length, quantity, USB port Motorized backgauge up to 1,000 mm with ball screw, can be folded up Clear operator panel mounted on swivel arm Hydraulic hold-downs arranged close to the cutting edge Foot pedal Central manual blade gap adjustment Cutting line illumination Wide support table with ball transfers Piece counter Single and continuous stroke Foldable finger guard 1,000 mm 1 side gauge 1,500 mm with scale, T-slot, and tilting cam 2 sheet support arms 1,000 mm with T-slot Easy replacement and regrinding of blades Adjustable cutting length for cost-efficient operation Bottom blade reverses 4 times Top blade reverses 2 times Oil filling included Safety light barriers at machine rear Qualified after-sales service Operating manual in GERMAN and ENGLISH Equipment in compliance with CE directives (Example photo) WE HAVE MORE THAN 850 REFERENCES!

Būklė: naujas, Condition: new Delivery time: approx. 12 - 14 weeks after order Country of origin: Turkey Price: €94,900 Lease rate: €1,793.61 Cutting length: 4,100 mm Max. sheet thickness - mild steel: 13 mm Max. sheet thickness - stainless steel: 8 mm Side frame throat: 350 mm Strokes per minute: 8 1/min Cutting angle: 1.75° Number of hold-downs: 18 Hold-down force: 62 t Back gauge: 1,000 mm Back gauge speed: 200 mm/s Motor power: 30 kW Oil tank: 330 L Support arms: 3 pcs. Table height: 818 mm Table width: 550 mm Table length: 4,520 mm Length: 5,350 mm Width: 2,250 mm Overall width with support arm and rear safety guard: 3,650 mm Height: 2,250 mm Weight: 16,300 kg Swing beam cutting system NC preselection control D-Touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge up to 1,000 mm on ball screw spindles, foldable Clear control panel mounted on swing arm Hydraulic hold-downs positioned close to the cutting edge Foot pedal Central manual blade gap adjustment Cutting line illumination Ksdpowirynsfx Afnolu Wide support table with ball transfers Piece counter Single and continuous stroke Foldable finger guard 1,000 mm 1 side stop 1,500 mm with scale, T-slot and cam 2 sheet support arms 1,000 mm with T-slot Easy blade change and re-sharpening Adjustable cutting length for efficient processing Bottom blade reversible 4 times Top blade reversible 2 times Filled with oil Light curtains at rear of machine Qualified customer service Operating manual in GERMAN and ENGLISH Equipment according to CE regulations (Sample photo) WE HAVE MORE THAN 850 REFERENCES!

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Kodjwirthepfx Afnolu Country of origin: Turkey Price: €112,800 Leasing rate: €2,131.92 Press force: 220 tons Bending length: 3050 mm Axes: Y1 / Y2 / X and R axes Stroke: 265 mm Distance between uprights: 2600 mm Throat depth: 410 mm Installation height: 530 mm Drive system: hydraulic Rapid traverse Y-axis: 200 mm/s Working speed Y-axis: 12 mm/s Return speed Y-axis: 180 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Motor: 11 kW Length: 4250 mm Width: 1770 mm Height: 2900 mm Weight: 12,250 kg ONE SERVO MOTOR AND PUMP PER CYLINDER Standard equipment: - 4 axes (Y1, Y2, X, and R) - CNC control SKY 22 - Full HD graphics display 21.5” with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easily draw bending contours with your finger) - User-friendly programming in dialog mode, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the developed length for sheet blanking - Automatic calculation of bending sequences - Graphic product and tool storage - Correction capability - USB ports and Ethernet connection for import, backup, and program export - Windows operating system - Import support for IGES, STEP, DXF files - Servo-driven backgauge on linear guides and recirculating ball screws - Backgauge finger blocks on double linear guides - CNC-controlled crowning - Upper tool 1010/A/75°, segmented and offset - 4-V die block 60x60 2009 (V=16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS mounted on upper beam - Sheet support arms on linear guides - Equipment in accordance with CE directives - Oil fill - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - The hydraulics operate only during upper beam movement - Low energy consumption - Low noise - High speed Options: - Z1/Z2 axes - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D including Profile-S PC software with 3D file import - Quick-release clamping lever for upper tool

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €144,300 Leasing rate: €2,727.27 Press force: 320 t Bending length: 3,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between frames: 2,600 mm Throat depth in side frame: 410 mm Installation height: 630 mm Drive system: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Motor power: 2 x 11 kW Length: 4,300 mm Width: 1,820 mm Height: 3,330 mm Weight: 16,500 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X, and R) CNC CONTROL SKY 22 - Full HD graphic display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy to draw the bending contour with your finger) - User-friendly dialog programming, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of blank length for sheet metal cutting Kljdpewiqphefx Afnsu - Automatic determination of bending sequence - Graphical product and tool memory - Correction possibility - USB ports and Ethernet port for import, backup, and program export - Windows operating system - Import support for IGES, STEP, DXF files Backgauge driven by servomotor on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tooling: 1010/A/75° segmented and offset 4-way die block 60x60 2009 (V = 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on upper beam Sheet support arms on linear guides Equipped in accordance with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - The hydraulics only run during upper beam movement - Low energy consumption - Low noise emission - High speed Options: - Z1/Z2 axes - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D including PC Software Profile-S with 3D file import capability - Quick-release clamping levers for the upper tooling

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €59,600 Lease rate: €1,126.44 Cutting length: 3,100 mm Max. sheet thickness (mild steel): 10 mm Max. sheet thickness (stainless steel): 6 mm Side frame throat depth: 50 mm Strokes per minute: 13 Cutting angle: 1.5° Number of hold-downs: 16 Hold-down force: 22 t Backgauge: 1,000 mm Backgauge speed: 200 mm/s Motor power: 22 kW Oil tank: 200 l Support arms: 2 pcs. Table height: 865 mm Table width: 580 mm Table length: 3,515 mm Machine length: 4,200 mm Width: 2,250 mm Total width incl. support arm and rear safety grid: 3,600 mm Height: 2,100 mm Weight: 9,300 kg Swing-beam cutting system NC pre-selection control D-Touch 7 with touchscreen for backgauge, cutting length, quantity, USB port Motorized backgauge up to 1,000 mm with ball screws, foldable Clearly arranged control panel mounted on swiveling arm Hydraulic hold-downs positioned close to the cutting edge Foot switch Central manual cutting gap adjustment Cutting line illumination Wide support table with roller balls Piece counter Single and continuous stroke Klsdpfx Aewiqxcsfnou Foldable finger guard 1,000 mm 1 side stop (1,500 mm) with scale, T-slot and cam 2 sheet support arms (1,000 mm) with T-slot Easy blade change and regrinding Adjustable cutting length for efficient processing Lower blade reversible 4 times Upper blade reversible 2 times Oil filling Light barriers at rear of machine Qualified customer service Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations WE HAVE MORE THAN 850 REFERENCES!

Būklė: naujas, Gamybos metai: 2025, Būklė: nauja Pagaminimo metai: 2025 Sandėlio numeris: 090086 Pristatymo laikas: iš karto, galimas tarpinis pardavimas Kilmės šalis: Turkija Kaina: 7 400 € Lizingo įmoka: 142,82 €/mėn. Sandėlyje: 1 vnt. Peilio ilgis: 197 mm Lakšto storis (420 N/mm²): 4 mm Lakšto storis (600 N/mm²): 2 mm Eigos dažnis: 20 karto/min Kampas: 90° Variklis: 4 kW Ilgis: 890 mm Plotis: 780 mm Aukštis: 1 115 mm Svoris: 550 kg Hidraulinė pavara Automatinis pjovimo plyšio reguliavimas 2 prispaudimo įtaisai Kledpfxjwiqmms Afnju 2 kampu reguliuojami atmušėjai Apsauga iš plexiglaso Pedaļu valdiklis Atliekų surinkimo talpa Įranga atitinka CE direktyvas Eksploatavimo instrukcija vokiečių ir anglų kalbomis

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 37 000 mm, bendras plotis: 4 000 mm, bendras aukštis: 3 750 mm, darbinio aukščio: 500 mm, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Lisec IG Line 4000 x 2500 mm (2001/2007), left/right, for triple glazing units, models as per Lisec model catalogue and 4-sided stepped elements: - RTVN-32/25WE, washing machine infeed (3.2 m length), year of manufacture 2007 (!) - RTL-25VN, washing machine with 6 brushes for Low-E, including 1 hot water tank, 1 sand filter and 1 blower, year of manufacture 2007 (!) - RTVN-16/25ST, washing machine outfeed (1.6 m length), year of manufacture 2007 (!) – RSVN-38/25A, frame mounting zone, year of manufacture 2001 – RTVN-15/25MZ, measuring zone for gas filling press, year of manufacture 2001 – RTVN-11/25ST, infeed conveyor of gas filling press (or extension for measuring zone), year of manufacture 2001 – FPS-36/25U2T, gas filling press for Argon, year of manufacture 2001 – RTVN-16/25ST, outfeed 1 of gas filling press, year of manufacture 2001 – RTVN-16/25ST, outfeed 2 of gas filling press, year of manufacture 2001 – APKV-25/2, 2-lane cork applicator, year of manufacture 2001 – RTVN-15/25VFE, sealing infeed with glass and frame measuring device as well as barcode reader for special shapes, year of manufacture 2001 – VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), 4-sided stepped elements (bottom 0–50 mm, front, rear and top 0–140 mm), as well as special shapes according to Lisec special shapes catalogue, Beckhoff PC, Lenze servo motors and controllers, year of manufacture 2001 – DOS-1PUD + SID, material dosing for PU (base 2 x 200 litres, liquid hardener 200 litres) and SI (base 200 litres, hardener 20 litres), year of manufacture 2001 Klsdpfx Ajy Sv Sgjfnou All machines were fully operational until dismantling and are now available ex stock in Hofkirchen/Austria as well as ex stock in Oroshaza/Hungary.

Būklė: naudotas, XSK-400 Gummimischmühle – Zweiwalzenmischer, offene Bauweise | Wuxi Double Elephant Hersteller: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Modell: XSK-400 Herstellungsland: China Technische Daten: Walzendurchmesser: 400 mm Arbeitsbreite: 600 mm Walzengeschwindigkeitsverhältnis: 1 : 1,35 Vorderwalzengeschwindigkeit: 17,45 m/min Hauptantriebsleistung: 45 kW Motordrehzahl: 980 U/min Nennspannung: 380 V Frequenz: 50 Hz Batch-Kapazität: ca. 20–30 kg Maschinengewicht: ca. 7.000–8.000 kg Beschreibung: Kledpfjxrdgvex Afneu Die XSK-400 Gummimischmühle ist eine hochwertige Zweiwalzenmühle in offener Bauweise, hergestellt von Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. (China). Konzipiert für das Mischen, Vorwärmen und Kalandrieren von Gummimischungen, gewährleistet diese Maschine einen stabilen Betrieb, präzise Temperaturregelung und eine lange Lebensdauer. Ideal für industrielle Gummiproduktion, Schlauch- und Dichtungsherstellung sowie für Laboranwendungen. Hauptmerkmale: - Schwere, gekühlte Gussstahlwalzen mit ausgezeichneter Härte und Oberflächengüte - Durchgebohrte, wassergekühlte Walzen für konstante Temperaturführung - Geräuscharme, gehärtete Getriebeübertragung für einen ruhigen Lauf - Motorisierte Spaltverstellung für präzisen Walzenspalt - Sicherheitsschalter und zuverlässige elektrische Komponenten - Robuste Konstruktion, einfache Wartung und hohe Lebensdauer Anwendungsbereiche: - Mischen von Kautschuk- und Silikonmischungen - Auswalzen von Kunststoff- und Gummibahnen - Herstellung von Schläuchen, Dichtungen und Förderbändern

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, rida: 669 km, galia: 294 kW (399,73 AG), pirmoji registracija: 06/2023, kuro tipas: dujos, tuščias svoris: 9 350 kg, didžiausias leistinas svoris: 9 294 kg, bendras svoris: 18 644 kg, ašių konfigūracija: 4x2, ratų bazė: 38 000 mm, stabdžiai: retarderis, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: plienas-oras, sėdimų vietų skaičius: 2, krovimo vietos ilgis: 4 550 mm, krovinių skyriaus plotis: 2 400 mm, Gamybos metai: 2023, Įranga: diferencialo užraktas, eismo juostos palaikymo asistentas, kalno įkalnės asistentas, pilna techninės priežiūros istorija, priekabos jungtis, retarderis, sėdynės šildytuvas, Iveco S-Way 400/Meiler/CNG/gamtinės dujos/linginė-oro pakaba/vilkimo kablio jungtis • Gamintojas: IVECO • Modelis: S-Way 400 • NAUJA KAINA nuo 210 000 € Kodezavzcepfx Afnjlu • Rida: 669 km • Pirmoji registracija: 06.2023 • Galia: 294 kW/399 AG • Pavarų dėžė: automatinė • Antstatas: Meiler trijų pusių savivartis • Krovimo platforma: Ilgis: 4,55 m x Plotis: 2,40 m • CNG/gamtinės dujos • Ratų bazė: 3,80 m • Retarderis • Oro kondicionierius • Kruizo kontrolė • Pagalba pajudėjimui į kalną • Eismo juostos palaikymo asistentas • Pajudėjimo pagalbos sistema • Diferencialo blokavimas • Laisvų rankų įranga • Tachografas • Stoglangis • Šildomos sėdynės • Priekabos jungtis: duo-matic ir standartinė • Priekabos hidraulika • Automatinės šviesos • Šildomi šoniniai veidrodėliai • Ksenono žibintai • Euro 6 • Tuščias svoris: 9 350 kg • Naudingoji apkrova: 9 294 kg • Leistina bendroji masė: 18 644 kg • Vokiška transporto priemonė • Vokiški dokumentai • Paruoštas iškart naudoti • Šis pasiūlymas nėra įpareigojantis ir gali būti keičiamas. - Pardavimas galimas bet kuriuo metu, - Galimi netikslumai ir/arba rašybos klaidos. - Pardavimas pagal mūsų bendrąsias sąlygas.