Fischer De45D90041Pk03Mw pirkti naudotą (224)

Būklė: naudotas, Gamybos metai: 2003, Vidinis skersmuo 99999 mm Šlifavimo gylis 99999 mm Apsisukimų skersmuo 99999 mm Šlifavimo skersmuo 99999 mm Šlifavimo ilgis 200 mm Centro aukštis 175 mm NC vidinė šlifavimo staklė B ašis 4 x 90° Q ašis kūgiui nustatyti Lhsdpfx Aheuxft Se Ueg Naudota su nedideliu aptarnavimu 2 HF vidinės šlifavimo verpstės: -Fischer MFM 1090 90 000 aps./min. -Fischer MFM 1242/60 42 000-60 000 aps./min. 1 išorinė šlifavimo motoro verpetė Fischer MFVS1407 7 000 aps./min. -Pneumatinis spaudimo įrenginys, eigos ilgis 20 mm -Aprauginimo įrenginys su 2 svyrančiomis svirtimis, hidrauliškai atlenkiamas -Kontakto aptikimas su žiediniu jutikliu Dittel ant ruošinio verpstės -Pasyvus kontakto aptikimas su magnetiniu pagrindu -Popierinės juostos filtras 375 l

Būklė: naudotas, Gamybos metai: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -T6: internal grinding attachment -T7: internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP control on T1 and T2 by ELASO (contactless), integrated into the control interface -GAP control on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock, hydraulic with fine adjustment +/-150 µm -Dressing device on the lower table, workpiece spindle side -Dressing device on the lower table, tailstock side -Dressing device on the upper table -New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece headstock with direct drive *highly recommended for non-circular grinding *max. workpiece weight, between centers: 150 kg *max. workpiece weight, overhung: 75 kg *water-cooled *Morse taper 5 combined with short taper mount to DIN 55026 Lsdpfx Aeuxfu Nsh Ujhg *spindle orientation stop *fixed lower section B-axis with direct drive, center height 225 mm *extremely torsion-resistant *high positional accuracy *resolution ° *water-cooled MECHANICAL OVERHAUL: - Complete machine overhauled according to Kellenberger measurement protocol - New paintwork New hydraulic unit: - Improved temperature control (oil cooler) - Energy-saving: only one pump, and not running continuously! - Pressure monitoring - Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X axis - Wear-free, since no contact during operation - No loss of accuracy, even during prolonged operation under full load at maximum speed - Friction-free at low speeds - No reversal jump of friction force when changing direction - Transmits smallest rotational movements - No stick-slip effect even at low speeds - No fluctuation in friction torque due to recirculating balls - Higher axial stiffness than ball screw drives - Significantly better damping, leading to improved workpiece surface and longer tool life - No vibrations due to recirculating balls - Also suitable for high speeds and accelerations - Cost-effective alternative to linear motors, offering higher accuracy and much less heating - Much lower power loss and thus no swarf issues on permanent magnets - Much lower cooling requirements compared to linear motors ELECTRICAL OVERHAUL: -New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface -Newly constructed control cabinet -New drive technology -Replacement of all electrical wiring (Berus pressure switches etc.) -New absolute glass scales in X and Z -New absolute encoder (for B-Axis) CONTROL SYSTEM: The grinding software consists of a base license and various options, depending on the machine configuration. Software base functions: - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillation grinding - Workpiece...

Būklė: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical overhaul: - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds Lsdpfjuxfucjx Ah Ushg - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...

Būklė: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, šlifavimo aukštis: 100 mm, šlifavimo ilgis: 3 250 mm, Siūlome šią naudotą Löffler KSL-100 MG briaunų šlifavimo staklę, pagamintą 1995 m. Lhsdpoythu Isfx Ah Usg Gamintojas: Löffler Maschinenbau GmbH, Langenaltheim / Mfr. Tipas: KSL-100 MG Gamyklinis numeris: 95.005/6/95 Pagaminimo metai: 1995 Jeigu turite klausimų ar reikia daugiau informacijos, parašykite mums žinutę arba paskambinkite.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3005, Foellmer Motorized Perforating Machine 45 ME with creasing and micro-perforation tool (see picture) Activation: Electric via foot switch. Working width: 45 cm / Table size: 60 x 35 cm Capacity: Up to 15 sheets (depending on material) Dimensions (H x W x D in mm): 1120 x 600 x 1000 Weight: 117 kg Connection: 400 V / Operating manual included. Shipping at buyer's expense. Collection possible. Lhedpfjwu Dvfsx Ah Ueg Please note: Our listings are for used machines, which may show signs of use (minor scratches or yellowing).

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: kompresorius, MORGANA Digifold Pro By combining creasing and folding in a single unit, this highly productive and user-friendly mobile finishing center is created. Perforation is also possible, further expanding its range of applications. With a speed of up to 6,000 sheets/hour and a maximum format of up to 900 x 358 mm, the new Digifold Pro is even more versatile. A large touchscreen display makes operating the Digifold Pro, as well as all other machines of the Pro generation, particularly easy. Versatility Lsdpfxewndzbj Ah Uohg The Digifold Pro can be used in three different ways, depending on your requirements: - As a creasing machine - As a folding machine - As an integrated creasing and folding machine, performing both functions in a single pass Feeding: Suction feeder draws paper from below Paper size: max. 900 x 358 mm // min. 210 x 140 mm Paper weight: max. 400 g/m² // min. 100 g/m² Number of creases per sheet: 9 Max. number of folds per sheet: 2 Program memory slots: over 1,000 Min. distance between two creases: 40 mm Min. distance between two folds: 70 mm Min. crease distance from leading edge: 50 mm Min. fold distance from leading edge: 50 mm Min. crease distance from trailing edge: 50 mm Min. fold distance from trailing edge: 50 mm Fold length: 70 mm / Max. fold length: up to 450 mm (automatic feeding), up to 1,800 mm (manual feeding) Fine adjustment: 0.1 mm increments Max. speed (A4): 6,000 sheets/hour Dimensions (L x W x H): 1,980 x 655 x 1,265 mm Weight: 190 kg Power supply: 230 V Shipping at buyer's expense possible. 3-month bring-in warranty. Please note: All our listings are for used machines, which may show signs of wear (minor scratches or yellowing).

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, bendras svoris: 600 kg, įvesties srovės tipas: Oro kondicionierius, Watkiss PowerSquare 224 Offline / Manual Operation The machine is in excellent condition. The PowerSquare is not only versatile, but also extremely easy to operate and produces unbeatable professional brochures. • Booklet maker for brochures up to 56 sheets / 224 pages with 80 gsm paper • High-performance wire stitch head (completely overhauled) • Product size: Min. feed size: 120 x 200 mm // Max.: 370 x 520 mm • Automatic format adjustment, automatic wire length adjustment. • 2 new front-edge trimming knives! • 1 - 6 stitches evenly spaced along the book spine. Staple-free brochures are also possible. • Wire from spool: up to 291,500 stitches • The machine has been completely overhauled and operates without any faults. • Fully automatic machine settings • Immediately ready for operation / production starting from brochure 1 • Test run possible by arrangement. • Automatic triggering • 230 Volt / 600 kg Lsdoxn Rdaspfx Ah Uohg • Formats from 120 x 200 mm to 370 x 520 mm Produce unbeatable professional brochures with the PSQ 224 EUR 27,900.00 plus VAT. Shipping / delivery available. Our offers concern used machines, which may show signs of use (minor scratches or discolorations). Collection possible, shipping available, installation and training available.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, bendras plotis: 500 mm, bendras ilgis: 7 000 mm, plokštės aukštis: 600 mm, Granito matavimo sija iš Johannes Fischer Aschaffenburg Matmenys: 7000x500x600 mm Išfrezuota viršutinė bėgimo dalis Gręžtinės angos viršuje Tikslumo klasė dar tikrinama (tikėtina, kad geresnė nei 0 klasė pagal DIN876) Lsdpfx Ajym R U Rjh Uohg Papildomi apdirbimai galimi už papildomą mokestį.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, bendras plotis: 1 000 mm, bendras ilgis: 4 000 mm, plokštės aukštis: 400 mm, Granitinė matavimo plokštė iš Hahn & Kolb (Johannes Fischer Aschaffenburg) Lhsdpfsym R Tmex Ah Uog Matmenys: 4000x1000x400 mm Paviršius yra iš naujo apdirbamas iki tikslumo klasės 00 (arba pagal pageidavimą) Pasirinktinai: stalo pagrindas arba kojos

Būklė: nepatikrintas (naudotas), Gamybos metai: 2000, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 2259, X ašies eiga: 6 000 mm, Y ašies eiga: 3 500 mm, Z ašies eigos atstumas: 1 900 mm, sukimosi greitis (maks.): 24 000 aps./min, valdiklio modelis: Siemens 840D, Nėra nustatytos minimalios kainos – garantuotas pardavimas už aukščiausią pasiūlytą kainą! TECHNINĖS DETALĖS Lhedpfx Ajyv A Dkeh Ujg X ašies eiga: 6 000 mm Y ašies eiga: 3 500 mm Z ašies eiga: 1 900 mm b ašis: +/- 110° c ašis: 360° Sukimosi greitis: 24 000 aps./min. Veleno tvirtinimas: HSK 63 Veleno variklis: 25 kW Stalo matmenys: 6 000 mm x 2 500 mm (skylės išdėstymas 22H7 / M16) Greitųjų judesių X + Y ašimis: 30 000 mm/min Greitųjų judesių Z ašimi: 28 000 mm/min Greitasis žingsnis: 30 000 mm/min ĮRANGOS DETALĖS Valdymo sistema: Siemens 840D Įrankių keitiklis: 40 įrankių ĮRANGA Velenas: Fischer (tipas MFWS 1709/30, 2 vnt.) Frezu galva: Forest Line (tipas: šakės galvutė, b ašis +/- 110° pasukama, c ašis 360° pasukama) Richter drožlių transporterio (grandininis transporterio) Blum įrankių matavimas Stotelė frezu galvutėms padėti (2 vnt.)

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H2120X00.., Gamybos metai: 2020, veikimo valandos: 1 256 h, keliamoji galia: 3 000 kg, kėlimo aukštis: 4 980 mm, laisvas kėlimas: 1 600 mm, kuro tipas: dyzelinas, stiebo tipas: triplex, statybinis aukštis: 2 250 mm, šakių ilgis: 2 200 mm, pavaros tipas: Diesel, Diesel forklift truck Chassis number: H2120X00.. Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Solid rubber Front tire condition: 60 - 80% Rear tire type: Solid rubber Rear tire condition: 40 - 60% Lhsdpswlwp Hsfx Ah Ueg Side shifter, fork positioner, 3rd valve, 4th valve, rear working light, front working light, full cab,

Būklė: naudotas, rida: 680 000 km, galia: 375 kW (509,86 AG), pirmoji registracija: 05/2008, kuro tipas: dyzelinas, bendras svoris: 26 000 kg, ašių konfigūracija: 3 ašys, stabdžiai: retarderis, pavaros tipas: mechaninis, emisijos klasė: Euro 5, Įranga: oro kondicionavimas, * Mercedes-Benz 2651 Actros MP2 V8 Tractor Unit * First registration: 2008 * 680,000 km * Euro 5 * Telligent manual transmission with clutch * Tipping hydraulics * Leaf-air suspension * 6x4 axle configuration * Air conditioning * Retarder * Mega cab Lsdpfxoyq A Drj Ah Uohg * Wheelbase: 3.30 m * Unladen weight: 9,575 kg * All injectors replaced! * Engine runs unevenly and emits smoke * Camshaft likely damaged Special features: Work lights on rear of cab (upper), Audio system: Truckline CC 65/70 radio with cassette deck, 220 Ah battery, comfort cockpit, air horn, driver’s cab: movable step, rear axle H 7, 13 t, crown wheel 300, reinforced clutch, mounting plate / saddle plate 40 mm for fifth wheel coupling, PTO MB 2C, Voith retarder, low-maintenance fifth wheel coupling, fifth wheel coupling: Fischer, circuit breaker, cab seats: driver’s air-suspended comfort seat with horizontal suspension, sun visor, 24V cab socket, straight front axle, transmission oil cooler Additional equipment: Emission standard: EURO 5, axle configuration: 6x4, trailer socket 24V / 15-pin, work lights, external mirrors electrically adjustable & heated, wide-angle and heated exterior mirror (left), outside temperature display, rear axle differential lock, cab: L (long), suspension: leaf/air, electric windows, 80 A alternator, 16-speed gearbox, interior pollen filter, body/chassis: tractor unit, fuel tank: 400 L, engine 16.0 L – 375 kW V8 diesel (OM 502 LA), engine brake with constant throttle, wheelbase 3,300 mm, fifth wheel coupling: 150 mm installation height, disc brakes, steel rims 9.00x22.5, cab control type, Telligent shifting, Telligent braking system with ABS + ASR, front underrun protection, CB radio preparation, telephone/fax preparation, immobiliser, central locking with key, permissible gross weight: 26.0 t

Būklė: naudotas, Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Hard stone angle plate by Johannes Fischer Aschaffenburg In laboratory quality, 350x300x60mm Ledpfx Ahsq Tdh Es Ujhg Squareness < 2µm (1") Flatness of measuring surfaces < 1µm Slightly damaged corners, measuring surfaces are intact Inspection certificate available at extra cost on request

Būklė: naujas, Gamybos metai: 2026, Four-axis controlled pressure blasting cabin for cleaning casting moulds, steel rings, casting dies in aluminium casting, tyre moulds, press tools, etc. The movement of the blasting nozzles is freely programmable. Equipped with 2 automatic nozzles and 1 manual blasting nozzle for touch-up cleaning of components. Featuring a Hardox rotary table and screw conveyor for long-lasting operation of the blasting system. Lodpfx Ajdrtanoh Ushg For inquiries regarding technical specifications, please contact us in writing or by phone. These machines are based on manufacturing at the Großenlüder site since 1971. Harth & Seifert – Georg Fischer – Schiffmann und Seidl – Oliver Fritz GmbH & Co. KG with their long-standing, well-known contacts.

Būklė: naudotas, 4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Rexroth, hydraulic control block from Fischer guillotine shear DHS 12 / 3000 Lodjgw Tuvjpfx Ah Ujhg -Type: 4WEH 22 D 41/8LW 220-50 NET -Dimensions: 425/230/H280 mm -Weight: 44 kg

Būklė: naudotas, Guillotine Shear Blades, Replacement Blades for Guillotine Shears, Spare Cutting Edges, Shear Blades, Scissor Blades - Replacement Blades: suitable for guillotine shears, from stock for Fischer DHS 12/3000 guillotine shear - Quantity: 4 pieces available - Lengths: 2 pcs. 2650/100/25 mm / 2 pcs. 450/100/25 mm - Hole spacing: 200 / 250 mm, see photos - Accessories: incl. box with mounting screws - Price: for the complete set Lhedpfx Ahjharule Ueg - Total weight: 126 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, Rankinė lengvojo lydinio diskinių pjūklų staklės Metallkraft LMS 400 - Veikia Lhsdjx Tz R Depfx Ah Ujg - Pagaminimo metai: 2007 - Pakeičiama pjūklo geležtė pridedama - Galima patikrinti vietoje prijungus prie elektros tinklo - Pristatymas per ekspediciją už papildomą mokestį - Pakrovimas vietoje krautuvu - Sąskaita faktūra su PVM

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, Stations: 6, Power: 40 kW, Control: Siemens. Includes upstream Fischer separation head, Festo feeder, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip processing system with ejection and hydraulic unit. Documentation available. On-site inspection possible. Ljdpfsu T Rhbox Ah Uehg

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus,

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, bendras ilgis: 620 mm, Mechanics: All wear parts of the machine are replaced, including the feed spindle on the X-axis. All assemblies are restored to a like-new condition. After the overhaul, the machine is comparable to a new unit. Geometry: The machine is completely disassembled down to the guideways. Before the geometry of each table and assembly is restored, both the X and Z-axis guideways are hand-scraped and restored to like-new condition. Upon completion, the machine receives a measurement protocol according to the manufacturer's specifications. Painting: After the machine's geometry is restored, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also fully overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Specifications: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Machine Weight and Dimensions: 2,500 kg // 2340 x 1445 x 1900 mm Machine Equipment (Standard): 1x Workpiece headstock MK5 1x Operator panel Ljdpfxjurw Uyj Ah Uohg 1x Mount for internal grinding spindle 1x Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1x Hydraulic unit Optional: - 2-axis digital readout system - Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds possible upon clarification of technical details) - Separate low speed for part alignment

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Hidraulinė presas VEB Zeulenroda PYE10N Lodpfsw S Uccsx Ah Ujhg Naudota būklė, kaip parodyta nuotraukose Visus duomenis rasite nuotraukoje su identifikacine lentele.

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Portal machining center for HSC milling The machine operates within a Röders RCM Automation system. It can therefore be integrated into an automated manufacturing environment. Technical data - Travel ranges: X 800 mm, Y 600 mm, Z 400 mm - Drive power: 17 kW - Spindle speed: 36,000 rpm – Fischer motor spindle - Spindle taper: HSK E50 - Feed rate: up to 60 m/min Work table - Dimensions: 900 mm x 700 mm - Max. workpiece weight: 800 kg Control - Röders HSC RMS6, including software for: Milling simulation and pocket machining - Electronic hand controller and mouse - Ethernet interface integrated into Windows NT - Remote maintenance capability for RSM 6 machine control Machine construction - Portal design with temperature stabilization of the machine frame Tool changer Lhodpfx Ahjvri Nms Ueg - 30 stations with collision monitoring Equipment - Cooling unit for the milling spindle - Infrared measuring probe for automatic: Tool length compensation, diameter measurement, and tool breakage detection - Microjet spray cooling and lubrication unit - Fixed bearing and spindle nuts are water-cooled - Full safety enclosure (crane loading possible) - Connection for workspace extraction system - 2 chip conveyor screws - Workpiece cleaning via separate air nozzles Machine data - Footprint (excluding service areas!) LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm - Weight approx. 13,000 kg - Connected load 400V, 50/60 Hz, 3 phases The machining center is in good condition. Maintenance and servicing have been carried out regularly. A demonstration under power and in operation is possible by prior appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Ceramic surface plate by Johannes Fischer Aschaffenburg, laboratory grade, 1000x1000 mm, flatness less than 1 µm (!). Includes cabinet base with two doors. Inspection report available upon request for an additional charge. Lhjdpfx Ahoix Ahqo Usg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Hard stone angle by Johannes Fischer Aschaffenburg, in laboratory quality, 1000x275x100 mm. Squareness within less than 1 µm! Including Kunz vacuum slide and Mahr measuring probe. Lsdpfx Aheix Ahxj Ujhg Inspection certificate available upon request for an additional charge.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Hard stone angle plate by Johannes Fischer Aschaffenburg Laboratory quality, 350x300x60 mm Squareness < 2 µm (1") Flatness of measuring surfaces < 1 µm Minor damage to the corners, measuring surfaces are intact Ljdpfx Aoq Tdh Noh Uehg Test report available at extra cost upon request