Bruks Medienos Smulkintuvas pirkti naudotą (13 852)

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, variklio galia 7,5 kW hidraulinė spaudimo stalčius hidraulinės pompos variklio galia 1,5 kW įkrovimo bunkerio matmenys 870x425 mm sietas 15 mm Iedpfxoydpwrj Af Hotk talpa su atidarymo jutikliu CE žymėjimas techninė dokumentacija pagaminimo metai 1996

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for hard and soft materials + 22 kW motor + Effective square knives *For pallets: up to a maximum of 10 pallets per hour *Screen and material dependent. Significantly higher throughput for smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 ph, Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: machine color may vary Itjdpfsx Af Rdex Af Hek Weight: 1920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - Fast hydraulic system - Automatic shut-off when rotor runs idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra charge: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overbelt magnet + €6,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (Start and stop in sync with the shredder) - Enlarged hopper 1500x1500 mm + €3,480 net Requirements for input material: - Moisture content (atro) must be below 25% - Material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Būklė: naujas, Gamybos metai: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multiple reversible Hydraulically operated pusher Screen perforation of your choice (10 - 40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (LxWxH): approx. 2290 x 1420 x 1750 mm Turbo coupling Standard equipment includes: - automatic star-delta start - fast hydraulic system - automatic shut-off when rotor is idling - Speed: 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control for the hydraulic pusher - pertinax guides for the hydraulic pusher - vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF panels, and other materials (subject to testing and approval by the manufacturer) Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0-60 degrees Discharge height: approx. 2000 mm ± 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Itjdpsd Dgw Uofx Af Hjk Raw material requirements: - Moisture content (upon arrival) must be below 30% - Installation temperature: heated indoor area, at least +5°C - Metal and mineral impurities such as sand, stones, etc., lead to increased wear

Būklė: naujas, Gamybos metai: 2025, The ideal machine for shredding both hardwood and softwood. Another unit is now available (ex works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 14+2 pieces, 40x40 mm, reversible multiple times Rotor diameter: 260 mm Control system: Omron PLC Itedpfx Aod E R D Sjf Hjk Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated pusher Screen perforation as required (12–40 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm The following options are available at extra charge: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for segmented floor on all 4 sides + €2,170 net (prevents the pusher from jamming; recommended for material less than 3 mm thick) - Shredder raised by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + €5,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (synchronized start and stop with the shredder) - Special bearing + €1,540 (rarely required; closed, extra sturdy rotor bearing. Worth considering for screens smaller than 15 mm or with a high proportion of fines. Not necessary if the bearings are lubricated with grease approx. every 2 weeks during operation) Raw material requirements: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc., lead to increased wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us via freight forwarding, and we will document the test with photos and videos.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1994, Mawera RZM 200 Iodpfx Ajy T Ih Nsf Hotk Pagrindinis variklis: 22 kW su elektroniniu minkštu paleidimu Automatinis tuščiosios eigos išjungimas Hidraulika: 1,0/1,4 kW – polų perjungimas Piltuvo anga: 844 x 1000 mm Vamzdis iš gryno plieno: 270 mm Ø Rotoriaus greitis: 135 aps./min Kapojimo dantys: 30 vnt., keičiami Kapojimo našumas: 500-850 kg/h Ištraukimas: 30-35 m/s Svoris: 2100 kg (be valdymo spintos) Valdymo spinta: su PLC mikroprocesoriniu valdymu 30 vnt. keičiami 500-850 kg/h su PLC mikroprocesoriniu valdymu Darbo valandos: tik 2562 Skirtumas tarp RMO ir RZM: RMO yra senesnis, naudotoje rinkoje žinomas klasikinis modelis. RZM 200 – tai jo moderni evoliucija: tvirtesnė konstrukcija, sumanesnė valdymo sistema, patogesnė techninė priežiūra ir efektyvesnis darbas su šiuolaikinėmis naudotomis medžiagomis bei padėklais.

Būklė: paruoštas naudoti (naudotas), Būgninė skaldyklė celiuliozės drožlių arba kuro drožlių gamybai. Skaldyklė pildoma per vibro transporterį ir padavimo bunkerį. Komplekte yra Bruks drožlių sietas, tipas Bruks BS3. Elektros variklis 75 kW. Isdpfx Ajyh Umwef Hotk Našumas iki 60 m³ paruoštų drožlių per valandą. Padavimo angos plotis 540 mm, aukštis 300 mm.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1995, Didelės apkrovos rotacinė smulkintuvas (hog crusher). Perdirbami medžiagos: nuo medienos atliekų iki eukalipto žievės. Įrenginys su 250 kW elektriniu varikliu. Produkcija, dalelių dydis P100 mm, m³, biri talpa/val.: 135 (maks. 170). Produkcija, dalelių dydis P100 mm, t/val., žaliava: 33 (maks. 40). Įleidimo anga: 1514 x 695 mm. Itodpex Sdw Rjfx Af Hok

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Aluminum Z-shaped conveyor belt with supporting structure Including adjustable feet and freely swiveling transport castors with locking brakes Horizontal section: 800 mm Ascending section: 3,000 mm Second ascending section: 1,200 mm Incline angle at each bend: 60° Total conveyor belt length (measured on the floor): 3,500 mm Itsdpfeyhzhnjx Af Hsk Height of horizontal section: 400 mm Design: Aluminum construction - Double-reinforced profile 90x45 mm - Full-surface discharge sheet, 2.0 mm galvanized Drive and deflection drum: S235 steel, welded and machined Ø100x720 mm, crowned, shaft mounted with pillow block bearings Drive: Mounted geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive ready-wired up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS extra cross-stable with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats centrally positioned, 430 mm long, spaced approx. 299 mm apart Belt material: 2-ply, especially cross-stable At the bends, the belt is guided on both sides by 3 hold-down rollers each. The belt is manufactured with a 70 mm border-free zone on both sides. Due to the wave edges on both sides, the usable width of the conveyor belt is reduced: Usable width: 500 mm, calculated as follows: (top view) transverse configuration 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on running surface profile - 10x6 mm - Including recess in the discharge sheet - Including sliding bushes in the drive and deflection drums

Būklė: naujas, Gamybos metai: 2026, Aluminum Angled Conveyor Belt with Substructure Including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Bend angle: 45° Total conveyor belt length (measured on the ground): 5,000 mm Discharge height: 2,000 mm Height of the horizontal section: 500 mm Design features: - Aluminum modular construction - Reinforced triple profile 135x45 mm Itedoyhzhuopfx Af Hok - Continuous 2.0 mm galvanized steel cover plate Drive roller and return roller: S235 steel, welded and machined Ø150 x 820 mm cambered, shaft fixed with bearing units. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection: 230/400 V, 50 Hz, protection class IP54 Drive delivered ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PVC Conveyor Belt DM 15/4 0+007 PVC including wave edge profiles, green Belt width: 800 mm 2 wave edge profiles (80 mm high, 50 mm wide), high-frequency welded 32 T-50 cleats, approx. 355 mm pitch Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt is designed with a 70 mm edge-free zone on both sides. Due to the wave edge profiles on both sides, the effective belt width is reduced: Usable width: 490 mm, composed as follows: (Top view) Crosswise layout: 100+50+5+490+5+50+100 mm Discover custom solutions tailored to your industry! As an innovative mechanical engineering company, we take pride in offering custom solutions for the recycling, food, and processing industries. Our comprehensive product portfolio covers everything from conveyor systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. We also manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all tailored to our customers’ specific requirements. We understand that every industry and every project is unique. That’s why we customize our solutions individually to your needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. For us, there is no such thing as a special order—we find the right solution for every challenge! Challenge us! Contact us to discover how we can turn your requirements into made-to-measure solutions. Together, let’s shape the future of your production processes! Conveyor belt, conveyor system, discharge conveyors, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, conveyor belt magnet separator, lifting magnets, filter rods, magnetic grid, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems.

Būklė: naujas, Gamybos metai: 2026, Aluminum-angle conveyor belt with supporting frame including adjustable feet and machine leveling feet to compensate for uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Bend angle: 45° Height of horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Construction: Aluminum structural design - Double reinforced profile 90x45 mm - Full-surface 2.0 mm zinc-plated discharge plate Drive roller and return roller made of S235 steel, welded and machined Diameter 100x620 mm, crowned and precision-turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted geared motor 1.10 kW, belt speed: 0.53 m/sec Connection 230/400V, 50Hz, protection rating IP54 Drive pre-wired up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including PU wavy edge, petrol matt Belt width: 600 mm 2 pcs. corrugated edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs. T-40 cleats, 400 mm long, approx. 401 mm pitch Belt material: 2-ply, especially cross-stable In the bend area, the belt is guided on each side by 3 hold-down rollers. The belt features a 70 mm edge-free zone on both sides. Due to the double wave edge, the usable belt width is reduced: Usable width: 300 mm, determined as follows: (Top view) transverse arrangement 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC V-guide profile – 10x6 mm on the running surface - Incl. widened base frame for improved stability (top-heaviness) - Incl. cutout in the discharge plate - Incl. wear strips in drive and return roller - Incl. non-magnetic zone for over-belt magnetic separator Itsdpfx Afjyhzhze Hok - Incl. bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our comprehensive product portfolio includes everything from conveying systems, flat belt conveyors, inclined conveyors, and angle conveyors up to Z-conveyors. We also manufacture feeding hoppers, magnetic separators, over-belt magnet separators, drum magnet separators, and dosing bunkers – all built to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we adapt our solutions individually to your needs and specifications. Complex projects represent an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there are no special configurations – for every problem, we find the right solution! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, over-belt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, over-belt magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grids, grid magnet, metal separator, block magnet, filter systems, dosing bunker, feed hopper, filling systems

Gamybos metai: 2021, būklė: naujas, mašinos/transporto priemonės numeris: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm horizontal + 2200mm inclined Incline angle at the bend: 45° Discharge height: approx. 1800mm Height of the horizontal section: 200mm top edge PU conveyor belt Conveyor belt type: EM 9/2 0+05 PU, petrol matt finish Belt width: 500mm 21 pcs. T30 cleats welded on, pitch 310mm * Antistatic due to threads in the running side fabric Endless welded with stepped finger joint 40mm corrugated edge, both sides, high-frequency welded * Edge-free zone on both sides for belt guidance on the incline Full-surface support plate Drive: Motor approx. 1.1kW Belt speed: approx. 0.4 m/sec * Optionally controllable with frequency inverter Connection: 220/400V, 50Hz, protection class IP54 Itjdpfjh Eld Eex Af Hjk

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, veikimo valandos: 476 h, bendras svoris: 11 860 kg, galia: 407 kW (553,37 AG), Variklis: Deutz TCD 12.0 L6, 407 kW Pagaminimo metai: 2024 Serijos numeris: 21060084 Vieta: Šiaurės Reino-Vestfalija Visos darbo valandos: 476 h Darbo valandos po variklio keitimo: 91 h Rotoriaus darbo valandos: 207 h Prieinamumas: pagal susitarimą Įranga: 2 horizontalūs padavimo volai, 2 vertikalūs padavimo volai, Padavimo angos dydis: 1000 x 625 mm, Maks. rąsto skersmuo: Ø 620 mm, Peilių skaičius: 3 vnt., Priešpeilis: 1 vnt., Našumas: iki 150 m³/h, Svoris: 11.860 kg, Nuotolinio valdymo pultas, Itedpfxozcn Igj Af Hjk Spiralinė ventiliatoriaus sistema, Sunkiųjų grandinė padavimui, Krepšeliai: 50, 70, 100 mm Mašina yra nepriekaištingos, beveik naujos būklės ir gali būti apžiūrima darbo režimu pagal susitarimą! Garantija: Mašina parduodama tokios būklės, kokia yra atidavimo metu. Pardavėjas neprisiima jokios atsakomybės už trūkumus. Pasiliekame teisę į tarpinius pardavimus, pakeitimus ar remonto darbus. Ši informacija yra tik orientacinio pobūdžio ir nėra laikoma privalomu pasiūlymu.

Būklė: geras (naudotas), Gamybos metai: 1993, Vecoplan būgninė kapoklė VTH 75 / 22 / 5 Įėjimo matmenys Plotis: 750 mm Aukštis: 220 mm Itodpfxjxr Tp Hj Af Hok Variklis: 75 kW

Būklė: naudotas, Gamybos metai: 2006, Bruks būgninis smulkintuvas, modelis 820CM, pagaminimo metai 2006. Isdexr Trnopfx Af Hstk

Būklė: geras (naudotas), Gamybos metai: 1993, Rotor width 800 mm 22 kW motor 20 knives on the rotor, 25 mm concave A wooden frame is also included to raise the chipper so that a conveyor belt can fit underneath. Itsdpfx Aep H Sv Dsf Hjk

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, RS97 yra vienas geriausių medienos smulkintuvų pasaulyje. Jis visiškai atnaujintas ir aprūpintas 160 kW varikliu. Taip pat galime pasiūlyti padavimo konvejerį medžiagai. Visi techniniai duomenys pateikti pridedamoje techninėje specifikacijoje. Itjdpfx Afsxyqncj Hsk

Būklė: geras (naudotas), Kodas: 0369 Gamintojas: ISVE Modelis: 25/66 Rotacinis peilių smulkintuvas skirtas medienos atliekoms, plastikui, pakuotėms, riešutų kevalams, vaisių kauliukams, odos atraižoms, medžio žievei, šakoms ir kitiems medžiagoms malti. Variklio galia: 7,5 AG (5,5 kW) Itodpfx Aey Hqn Sof Hek Įvado angos matmenys: diametras 250 x 660 mm Galima prijungti prie dulkių surinkėjo naudojant po sietu esančią vamzdį Bendri matmenys: 930 x 770 x 1800 mm (aukštis) Svoris: 680 kg

Būklė: naujas, Gamybos metai: 2026, Drum Chipper Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chipping machines and drum chippers with horizontal feed are used in various sectors of the wood processing industry (such as sawmills and timber plants). Chippers from the “ATH” series produce high-quality, homogeneous wood chips with a low proportion of fines from wood residues, e.g., for use as premium wood chips in the pulp industry or as fuel chips for energy generation. Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Infeed height: 200 mm - Infeed width: 500 | 700 | 1000 mm - Number of chipping knives: 2 - 4 pcs - Number of counter knives: 2 pcs - Rotor diameter: 520 mm - Number of feed rollers: 3 pcs - Throughput capacity: up to approx. 40 stacked cubic meters/hour (*) - Chip length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Feed roller drive power: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 – 4,000 kg *Depending on chip length, main motor kW, number of knives, and feed method Advantages: - Maximum throughput Itedpfewbv Erox Af Hsk - Low proportion of fines - Low maintenance - Versatile applications - Customized manufacturing Need more information? Contact us! We are happy to advise you. Drum chipper | Wood chipper | Chipper | Chipping machine | Wood chipping machine | Shredder | Wood crusher

Būklė: geras (naudotas), Gamybos metai: 1991, galia: 22 kW (29,91 AG), Suitable for pallets or other residual material. Rotor width = working width 98 cm. 22 kW motor. Equipped with discharge auger. Itsdpfx Afst Tvk Ae Hek

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, Spoerri smulkintuvas, rotoriaus plotis 720 mm, variklio galia 18,5 kW, padavimo anga 720 x 860 mm. Itedoza Dc Iepfx Af Hjk

Būklė: naudotas, Gamybos metai: 2023, veikimo valandos: 600 h, Funkcionalumas: visiškai funkcionalus, galia: 55,16 kW (75,00 AG), bendras svoris: 3 500 kg, BBT 400 Woodzilla yra kompaktiška ir galinga mobilioji būgninė skaldyklė su agresyviu padavimo mechanizmu, sumontuota ant 3,5 t tandeminių ašių priekabos važiuoklės, galinti suktis 360° kampu. Techniniai duomenys Itjdpfxeykzlzs Af Hjk Metai: 2023 Darbo valandos: apie 600 val. Pavara: dyzelinis, Deutz TCD 2.9, 55 kW (75 AG), Stage 5 Padavimas: 320 x 500 mm Skaldymo būgnas: 400 x 500 mm, 4 peiliai Maks. rąsto diametras: 32 cm Atramos: 4 kartus hidraulinės Z-kranas: Ben-Tele 550 Kranas: pasiekiamumas 5500 mm Teleskopas: 1100 mm Radijo nuotolinio valdymo pultas skaldyklei ir kranui Stabdis: inercinis Svoris: 3 500 kg Mašina yra geros vizualinės ir techninės būklės. Vieta: Šiaurės Reinas-Vestfalija Prieinamumas: pagal susitarimą Garantija: Mašina parduodama tokios būklės, kokios yra pristatymo metu. Pardavėjas neprisiima jokios atsakomybės už defektus. Pasiliekame teisę į tarpinį pardavimą, pakeitimus arba remontą. Neradote tinkamos mašinos? Susisiekite su mumis!

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, galia: 132 kW (179,47 AG), Būgninis smulkintuvas Rudnik&Enners. Tipas: TH 250-300/650/5. Variklio galia 132 kW. Patekimo aukštis 300 mm. Apatiniai padavimo volai: 3 vnt. Viršutiniai padavimo volai: 2 vnt. Komplekte vibracinė lova – 8 m su atnaujintu pavaros mechanizmu, 1x 7,5 m bei 1x 10 m neperdirbtos. Metalo detektorius. Nuo 2014 metų nenaudota, pilnai atnaujinta. Paruošta iškartiniam naudojimui. Valdymo spinta yra. Iodpfx Aey R Nblef Hjtk

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2012, galia: 18,5 kW (25,15 AG), Rotorius 260 mm Pajungimo anga apie 630 x 830 mm Rotoriaus ilgis apie 630 mm Variklis: 18,5 kW Iodpfxsyfw D No Af Hjtk Peilių skaičius: 30 Sietas yra Kapitalinis remontas: - naujas variklis su montavimu - naujos stumdomosios kreipiančiosios - stumoklio matavimas - nauji peiliai - nauji priešpeiliai - visiškai naujas rotorius - hidraulika patikrinta / susidėvėjusios dalys pakeistos - nauji flanšiniai guoliai UCF 214 - naujas dažymas - reguliavimas / bandomasis paleidimas

Būklė: naujas, Gamybos metai: 2025, galia: 45 kW (61,18 AG), Įrenginys gali apdoroti įvairių tipų medinių atliekinių padėklų iki 90 padėklų per valandą našumu. Jis pasižymi unikaliu dizainu, kuriame sujungtos priešpjaustymo ir galutinio pjaustymo sritys, todėl medžiagos frakcija gali būti sumažinta iki 10 mm. Ši hibridinė technologija leidžia efektyviai apdoroti didelius padėklų atliekų kiekius. Be to, įrenginys aprūpintas: - magnetiniu separatoriumi metalinėms dalims pašalinti - juostiniu konvejeriu sklandžiam galutinės medžiagos tvarkymui ir transportavimui Ijdotpwrmepfx Af Hotk

Būklė: naujas, Gamybos metai: 2025, ♻ The SD 45 model stands out for its low power requirement, high productivity, easy operation, and long warranty. ✔ Motor power: 15 kW ✔ Rotor length: 430 mm ✔ Rotor diameter: 160 mm ✔ Rotor speed: 265 rpm ✔ Number of cutting knives: 15 ✔ Granulation: 10–50 mm Ijdsic U Dijpfx Af Hotk ✔ Capacity: up to 1.5 m³/h* ✔ Extraction connection: 152 mm ✔ Material: plastic, cardboard, wood (chipboard, MDF panels, etc.) ✔ Feed opening: 620x430 mm ✔ Dimensions (L/W/H): 0.95/1.08/1.91 m ✔ Weight: 920 kg 4 years warranty or 2,000 operating hours