Prod-Masz Zgr3000/1,2 pirkti naudotą (2 121)

Būklė: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Parduodama BUD-MASZ monterrey čerpių profilio stogo dangos gamybos linija Būklė: naudota, tačiau pilnai veikianti. Linija šiuo metu prijungta prie gamybos – galima išbandyti darbo vietoje. Techniniai parametrai: Gamintojas: BUD-MASZ (Lenkija) Profilis: monterrey Gamybos metai: 2007 Variklio galia: 15 kW Konstrukcija pritaikyta plieninės stogo dangos su čerpių profiliu formavimui Tvirta rėmo konstrukcija, užtikrinanti stabilų ir tikslų darbą Linijos paskirtis: Įranga skirta plieninių lakštų profiliavimui į čerpių imitacijos stogo dangą. Tinka tiek serijinei gamybai, tiek individualiems užsakymams. Pagaminta Lenkijoje, todėl pasižymi patikima kokybe ir ilgaamžiškumu. Kdedpfexhgl Tsx Aiusl Įrenginys prijungtas, galima apžiūrėti ir atlikti bandomąjį paleidimą. Jei turėsite daugiau klausimų – mielai atsakysime.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, Sertifikuota DGUV iki: 06/2027, bendras ilgis: 1 300 mm, bendras plotis: 775 mm, bendras aukštis: 1 360 mm, įėjimo srovė: 16 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, galia: 6 kW (8,16 AG), elektrinė saugiklis: 16 A, TOP spiralinė maišyklė Masz SM 120 Tešlos maišyklė su pažangiomis ir itin patikimomis technologijomis! Paprastas valdymas Tešlos aparatas su 2 laikmačiais Dubens apšvietimas ir avarinis rankinis jungiklis Miltelių dangtis ir temperatūros indikacija Nerūdijančio plieno dubuo ir spiralė Judanti mašina Pas mus – DGUV V3 patikrinta Jungtis 400V, 16A-CEE kištukas Matmenys: 775 x 1300 x 1360/1800 mm, PlxIlxA Kdsdjxxgmxjpfx Aiuel Naudota mašina Su garantija ir atsarginių dalių aptarnavimu Pasirinkimai: Pristatymo paslauga Serviso paketas Priežiūros sutartis Atsarginių dalių dėžė didesniam saugumui Instruktavimas ir paleidimas Daug daugiau spiralin ÷3 maišyklių sandėlyje!

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Stogo čerpių formavimo staklės, gamintojas BUD-MASZ, pagaminimo metai 2010, nuvažiuota 3510 km, ritinio plotis 1250 mm, be išvyniotuvo. Kedpfx Aoxbgl Tsiuodl

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, APS-10 Automatinė arbatos maišelių pakavimo mašina. Yra 2 pilnai veikiančios įrangos vienetai. Perkant abu, gausite 5 % nuolaidą nuo nurodytos kainos. Kodpfx Ajyn Ibkeiusdl Įrenginys skirtas automatiškai fasuoti birias medžiagas, pavyzdžiui, juodąją arbatą, vaisinę arbatą ir pan. ĮRENGINIO KONSTRUKCIJA Pagrindinės maišelius gaminančios mašinos dalys: - Dvigubo pakavimo medžiagos atraižų nuvyniojimo mechanizmas - Volelių kreipimo sistema - Pavyzdiniai sandarinimo ratukai - Pjovimo sistema - Skerspjūvio pjovimo sistema - Ryšuliavimo sistema (po 10, 20, 30, 50–100 vnt.) - Tūrio dozatorius - Dviguba konvejerio juosta PAKAVIMO MEDŽIAGA Termiškai sandarinamas filtro popierius: 16 g/m² Plotis: 490 mm Didžiausias matmuo: 500 mm Šerdies diametras: 76 mm TECHNINIAI IR EKSPLOATACINIAI DUOMENYS Bendri matmenys (P x I x A): 1500 mm x 1600 mm x 2100 mm Arbatos maišelio matmenys: 48 x 65 mm Našumas: nuo 500 iki 1000 vnt./min (priklausomai nuo medžiagos) Darbo takai: 10 eilių Dozavimas: 1–2 g Tiesioginė eksploatacija: 1 asmuo Maišelių surinkimas pagal įrenginio darbo greitį: 2–3 asmenys Maitinimas: elektra 3 x 380V50Hz Galia: 5 kVA Pneumatika: 6 bar Oro sąnaudos: apie 0,3 m³/val.

Gamybos metai: 2022, būklė: naudotas, Kremo virimo aparatas – MESH MASZ – Modelis: MK200Z – Puikios būklės. Ksdpfx Asy Enzmjiujdl Šildymas ir maišymas — Kremo virimo aparatas — šildymas, tirpinimas, infuzija, virimas, maišymas, garinimas. Naudojamas grietinėlės ir kitų produktų, kuriems reikalingas maišymas ir kaitinimas iki maksimalios 150 °C temperatūros, gamyboje. MK serijos kremo gamybos mašinos – Talpa: 200 litrų. MK mašinos naudojamos plikytos tešlos, kremų, tepalų, vaisių, glazūrų, padažų, įdarų, masių gamybai pagal jūsų pačių receptus ir visiems produktams, kuriems reikia tolygaus šildymo ir švelnaus, vienalaikio maišymo.

Gamybos metai: 2017, būklė: naudotas, Profesionalus rotacinis duonos kepimo pečius, naudojamas konditerijos ir kepinių gamybai. Gamintojas: MECH - MASZ Kdedpfx Aioxzry Nsuol Modelis: ROTOR 68 Skardų dydis: 60 x 80 cm Kepimo plotas: 8,6 m2 Svoris: 1450 kg Maitinimas: dyzelinis degiklis Pagaminimo metai: 2017.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, keliamoji galia: 1 200 kg, Įranga: kojinis nuotolinio valdymo pultas, 1200 kg keliamoji galia suvirinimo sukamasis stalas, CE sertifikatas už papildomą kainą su naujais spaustukais lengvi naudojimo pėdsakai Kodpoxbhnpsfx Aiuedl Keliamoji galia horizontaliai 1200 kg Keliamoji galia pakreipus 1200 kg labai tvirtas Greitis nuolat reguliuojamas nuo 0,05 iki 0,6 aps/min (pagal pageidavimą iki 1,5 aps/min) Sukamojo stalo skersmuo 1200 mm Aukštis horizontalioje padėtyje 950 mm, pakreipus iki vidurio 720 mm su rankiniu nuotolinio valdymo pultu, skaitmeninis ekranas Ilgis 1,35 m x plotis 1,2 m

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, new spiral mixer Masz SMR 180, movable, year of manufacture 2023, 120 kg dough capacity, equipped with 2 timers, stainless steel spiral, complete with 1 stainless steel bowl (optionally available with 1 additional bowl for €4,000), serial no. 121323, bowl diameter 75 cm, power 6.8 kW, 50 Hz, 400 V, external dimensions 149 x 87 x 128 cm, weight: 549 or 726 kg Kdodpfxjq H D Uwo Aiuel

Būklė: naujas, įėjimo įtampa: 400 V, Spiraalkneder – Betrouwbaarheid, Efficiëntie en Moderne Technologie Spiraalkneders zijn essentiële machines in bakkerijen, banketbakkerijen en voedselverwerkende bedrijven. Daarom beschikt elke spiraalkneder over geavanceerde technologie, eenvoudige bediening en een robuuste constructie. Professionals waarderen onze machines vanwege hun constante prestaties en de eenvoudige integratie in productielijnen. Hoge Deegmengprestaties Onze spiraalkneders verwerken deeg met een minimaal watergehalte van 40%. U kunt dus al batches mengen vanaf 10% van het totale kuipvolume. Bovendien verwerkt de spiraalkneder zowel zachte als stijve degen met hoge efficiëntie. Daarmee is hij ideaal voor bakkerijen, voedingsmiddelenfabrieken en banketproductie. De vaste kom van de spiraalkneder is dan ook een populaire en betrouwbare oplossing. Dankzij de stabiele, vaste mengkom levert deze spiraalkneder altijd consistente resultaten. Spiraalkneder – Duurzame Constructie en Maatwerkopties In de basis is de spiraalkneder voorzien van een stevig, poedergecoat stalen frame. Optioneel kan de behuizing worden uitgevoerd in roestvrij staal voor verhoogde hygiëne in bakkerij- en voedingsomgevingen. De kuip, spiraal, schraper en beschermkap zijn vervaardigd uit zuurbestendig roestvrij staal. Deze onderdelen zorgen voor een lange levensduur en eenvoudig reinigen na elk gebruik. Spiraalkneder met Modern Besturingssysteem Alle spiraalkneders zijn uitgerust met een gebruiksvriendelijk bedieningspaneel met dubbele snelheids- en tijdaanpassing. De deegschraper is voorzien van een sensor voor continue temperatuurcontrole tijdens het kneden. Zo zorgt elke spiraalkneder voor constante kwaliteit door nauwkeurige temperatuurregeling. Voor geavanceerde toepassingen bieden wij een versie met digitaal touchscreen, waarop recepten geprogrammeerd kunnen worden en reproduceerbaarheid tijdens grootschalige productie wordt gegarandeerd. Stille en Betrouwbare Mengprestaties Kdjdox A S Rwjpfx Aiuol Dankzij de moderne riemaandrijving werkt elke spiraalkneder zeer stil én efficiënt. De transmissie garandeert een soepele bediening, gebruiksgemak en minimaliseert storingsrisico’s. Energie-efficiëntie en Voedingsaansluiting De twee snelheden aandrijfmotor drijft zowel de spiraal als de kom gelijktijdig aan. Hiervoor is een 400V industriële stroomaansluiting vereist. De spiraalkneder met vaste kom beschikt bovendien over een handmatige bediening voor noodgevallen, zodat uw productieproces nooit onnodig stilvalt. Veiligheid en CE-Naleving Alle spiraalkneders voldoen aan de CE-veiligheidsnormen voor industriële levensmiddelenmachines. Elk onderdeel is ontworpen om ongevallen te voorkomen en gebruikers te beschermen tijdens het gebruik.

Gamybos metai: 2021, būklė: naujas, Cantilever racking, single-sided, 3.70m height, 1.20m arms, 500kg per arm – New product – Price ex works including loading! 1 racking unit with 4 uprights: €2,255 (net)! Transport price within Germany (excluding islands): €490 (net)! Of course, by omitting or purchasing additional frames, you can build longer or shorter racking units (also by varying the bay distances); this example with 4 frames is simply the most common racking solution! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 80 Frames: IPE 180 Uprights (single-sided) approx. 3,700mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable racking arms Load capacity with 600 mm load center: 500 kg per arm / 2,700 kg per upright With 4 uprights per level: 4 x 500 kg = 2,000 kg With longitudinal and diagonal braces, bay width = 1,300 mm; standard is 1.30m – if no deviation is specified, we will supply the racking with a bay width of 1.30m. Other bay widths possible: e.g., 1m, 1.25m, or for a small additional charge, 1.50m or custom sizes! Standard delivery: length of a rack row with 4 uprights approx. 4,000 mm. Delivered complete with all bolts and nuts, without floor anchors. Kjdpfx Aef Tv T Neiuodl Other configurations (frame height, arm length, arm types, etc.) available! Please contact us!

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 7 kW (9,52 AG), pavaros tipas: automatinis, kuro tipas: dyzelinas, kuro sąnaudos per valandą: 4 l/val, kuro bako talpa: 10 l, spalva: geltonas, darbinė masė: 1 200 kg, kėlimo galia: 300 kg/m, padang padangų: 100 procentas, pavaros būklė: 100 procentas, grandinės būklė: 100 procentas, sėdimų vietų skaičius: 1, pirmoji registracija: 06/2025, emisijos klasė: Euro 5, stiebo tipas: simpleksas, kaušo tūris: 0,025 m³, kasimo kibiro plotis: 40 mm, stabdžiai: kitas, pakaba: kitas, Gamybos metai: 2025, cilindrų skaičius: 1, Įranga: 4 viename kaušas, griebtuvo hidraulika, guminės vikšrinės juostos, hidraulika, hidraulinis kūjis, padėklų šakės, pakreipiamas vežimėlis, reguliuojama važiuoklė, reguliuojamas strėlė, standartinis kaušas, EKS12 mini ekskavatorius – kompaktiškas ir patikimas pagalbininkas sodininkystės, žemės lyginimo, smulkiems kasimo darbams, pamatų paruošimui ir sklypo priežiūrai. Techniniai duomenys Svoris: 1200 kg Kaušo talpa: 0,025 m³ Matmenys: 2880 × 950 × 2000 mm Kasimo gylis: 1787 mm Kuro bakas: 10 l Hidraulinis srautas: 16 l/min Variklis: KOOP 192F, 7,6 kW (dyzelinas) Metalinės hidraulinės žarnos Hidraulinės alyvos aušintuvas Pasirinkimai ir priedai Galingesnis 9,9 kW „Briggs & Stratton“ benzininis variklis (+225 €) Papildomai: pasukama strėlė (+450 €), išplečiama važiuoklė (+675 €) 14 skirtingų priedų: grąžtai, planiravimo kaušai, siauri kaušai ir kt. Kaina ir sąlygos €3430 + PVM Garantija: 12 mėnesių arba 1 500 variklio valandų Kodpfx Aexf Apijiusdl

Būklė: paruoštas naudoti (naudotas), Frekuencinis keitiklis servo REXROTH Ksdpfxsx Nmnae Aiuodl Rexroth Indramat anksčiau naudotas DIMTER skersinio pjovimo staklėse

Būklė: naujas, Gamybos metai: 2026, Būklė: nauja Pagaminimo metai: 2026 m. Sandėlio numeris: 090202 Pristatymas: 2026 m. gegužė, galimas tarpinis pardavimas Kilmės šalis: Turkija Kaina: 3100 € Maks. lakšto storis - konstrukcinis plienas: 1,2 mm Išsikišimas: 100 mm Kdedjwirx Djpfx Aiujl Veleno ilgis: 140 nm Įrankių skaičius: 8 vnt. Volelio diametras: 62 mm Variklis: 0,75 kW Apsisukimai: 32 aps./min Ilgis: 900 mm Plotis: 450 mm Aukštis: 1350 mm Svoris: 135 kg Tvirtas lieto korpuso Variklis su stabdžiu Pėdų pedalas Reguliuojamas apatinis volelis 8 volelių komplektai Stovas Eksploatavimo instrukcija VOKIEČIŲ arba ANGLŲ kalba

Būklė: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 800 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 500 mm, sukimo momentas: 46 Nm, valdiklių gamintojas: HEIDENHAIN, valdiklio modelis: 530, veleno nosis: HSK A 63, įrankių magazino lizdų skaičius: 170, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, CNC Heidenhain iTNC 530 WORKING AREA: Longitudinal travel X: 800 mm Transverse travel Y: 600 mm Vertical travel Z: 500 mm B-axis: +30 – 100° C-axis: n x 360° WORK TABLE: Dimensions: 320 x 320 mm Maximum workpiece weight: 120 kg SPINDLE: Spindle taper: HSK A63 Maximum spindle speed: 24,000 rpm Motor power at 40% duty cycle: 22 kW Maximum torque at 40% duty cycle: 46 Nm AUTOMATION: Tool magazine: 170 tools Erowa pallet changer: 7 stations Machine equipped with: • High-pressure through-spindle coolant • Workpiece probe • Laser tool presetting • Chip conveyor Kjdpfx Aisy Tam Rsusdl • Oil mist cooling • Rotoclear • ITC Intelligent Thermal Control • ITC-5X 5 Axis Intelligent Thermal Control • APS Advanced Process System • Remote electronic handwheel • Instruction manuals and CE declaration

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Kdjdpfxjfdkb Te Aiujl Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with foot section, usable depth 1,200 mm - 27 cantilever arms with a usable depth of 1,200 mm, equipped with deflectors - 9 roof supports with a projection of 1,500 mm, pre-drilled for customer-supplied roof construction (*Excludes timber purlins and trapezoidal sheets for roof construction) Kdedpfsh R Taqsx Aiuol - Includes longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts re-orderable and extension possible at any time) - (*Available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components’ surfaces are hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (max. snow load 1.85 kN/m², wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (max. snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, 1,200 mm deep, with deflectors = 4 storage levels above each other - Including longitudinal and diagonal bracing with 1,500 mm axle spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load labels C4 in accordance with DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight service with advance delivery notification. Material is packaged for ease of unloading. The foundation must be concrete, level, suitable for doweling, and capable of bearing all imposed loads. Floor conditions and load-bearing capacity as well as any necessary official permits are to be checked and ensured by the customer. The uprights must be anchored to the floor by the customer; wall anchoring is neither required nor recommended. According to trade association guidelines, uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) Kdsdod Tqaljpfx Aiusl - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg Ksdpsfdkb Usfx Aiujdl - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Scope of Delivery: - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times Kedpomhhy Nsfx Aiujdl - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times - Local collection possible Kjdpfx Aiefdkbhoujdl Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg Kedpfx Aeguk Dkjiuedl - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: naujas, Gamybos metai: 2025, Mechanical Roller W11G 1.2x1530 Mechanical drive, equipped with 3 asymmetrically arranged rollers, specially designed for processing thin sheet metal. Technical data: Kdjdpjfwxunsfx Aiusl Model: W11G 1.2x1530 Brand: ACL by ANFAN Motor power: 1.5 kW Maximum sheet thickness: 1.2 mm Working width: 1500 mm Number of rollers: 3 Length: 2700 mm Width: 600 mm Height: 900 mm Weight: 500 kg

Gamybos metai: 1978, būklė: naudotas, 1.2 t, Coil-Außendurchmesser 1.650 mm Kdjdpfx Aijtn Diouol 20 - 300 x 0,4 - 3,5 mm

Būklė: naujas, Gamybos metai: 2026, - Capacity: 1.2 mm - Expansion: 250 mm - With 8 sets of rollers Kjdpegg Nrkofx Aiuedl

Būklė: naudotas, Wire electrode, welding wire, welding wire -Manufacturer: Böhler, partially used spool of MAG wire electrode -Type: DT 1.4829 AWS: ER 309 Ø 1.2 mm Kdedpfxefu Trks Aiujl -Dimensions: Ø 300 / 100 mm -Spool weight: 12.8 kg