Prekybos Automatas pirkti naudotą (3 807)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Radom
459 km
Automatinė bigavimo ir lankstymo mašina
Dumor Lightning Fold Pro 8335B+33KFAutomatic Creasing and Folding Machine
Skambinti
Būklė: geras (naudotas), Dumor Lightning Fold Pro 8335B+33KF Automatinė bigavimo ir lankstymo mašina
Mašina pilnai veikianti ir paruošta darbui. Pagaminta 2018 m.
Tai efektyviausia bigavimo ir lankstymo sistema rinkoje, turinti tvirtą konstrukciją.
Didelės talpos vakuuminis padavimas.
Integruotos vakuuminio ir čiulpimo sistemos.
Pridedama naudojimosi instrukcija. 7 colių spalvotas „Smart Screen“ programuotojas leidžia lengvai nustatyti mašiną.
Techninės specifikacijos:
Popieriaus storis: 0,15–0,35 mm
Padavėjo talpa: 100 mm
Tikslumas: +/- 0,5 mm
Formatų diapazonas: 140×160 mm, 330×650 mm
Popieriaus tipas: kreidinis, nekreidinis, laminuotas, UV lakuotas, fotopopierius
Bigavimo peilio plotis: 1,0 mm, 0,6 mm, 1,4 mm
Greitis: 6300 lapų/val. (A4/1 lankstymas)
Bigavimo smūgių skaičius per praėjimą: iki 32 (tik bigavimo režimu)
Valdymas: du 7 colių jutikliniai ekranai
Numatyti lankstymo tipai: 7 tipai + individualūs lankstymai
Lankstymų skaičius: 1 arba 2
Lankstymo būdas: lankstymo peilis
Automatinis popieriaus ilgio matavimas: TAIP
Aukštos našumo viršutinis siurbimo padavėjas: TAIP
Patentuota pertraukiklio peilio sistema: TAIP
Iodpfjy Sd Uisx Abvotg
Bigavimo gylio reguliavimas: TAIP
Svoris: 280 kg,
Mažas skelbimas
Grońsko
593 km
Automatinis metalo pjūklas
BIGSTONECF 325
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, įėjimo įtampa: 380 V, pjovimo aukštis (maks.): 330 mm, pjovimo plotis (maks.): 370 mm, bendras aukštis: 34 mm, bendras svoris: 2 500 kg, Apvalaus plieno pjovimo diapazonas ties 90°: 330 mm, Kvadratinio plieno pjovimo diapazonas prie 90°: 330 mm, juostinio pjūklo ilgas: 4 430 mm, pjūklo juostos plotis: 1 mm, Parduodama nuotraukose matoma visiškai automatinė juostinė pjūklas, Taivano gamintojo Bigstone, modelis CF 325. Pagaminta 2008 m.
Staklės veikia, pajungtos – paruoštos darbui.
Suteikiu pakrovimo paslaugą vietoje.
Gamybos metai: 2008
Itsdpfxsxyuwno Abvsg
Juostos matmenys: 4430x34x1,1 mm
Variklis: 5 kW
Pjovimo galimybės:
- Kvadrate: 330 mm
- Stačiakampyje: 330x370 mm
Staklių svoris: 2500 kg
Mažas skelbimas
Europa
557 km
Automatinis tekinimo staklės
MAIERML 32E
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, CNC Swiss Type Automatic Lathe | Manufacturer: MAIER | Model: ML 32E | Year of manufacture: 2016
The machine can be inspected under power by appointment.
Condition: Very well maintained, fully operational / ready for use.
Operating hours: approx. 33,720 h
TECHNICAL DATA:
- Axes: 11
- Turning diameter over bed: 32 mm
- Spindle bore: 34 mm
- Channel 1/Z1 > Spindle stroke: 220 mm
- Main spindle speed: 6,000 rpm
- Channel 2/Z2 > Turning length (sub-spindle): max. 340 mm
- Channel 3/Z3 > Turret: 160 mm
- Collets: 1536E
Itjdpfxoy Sqafj Abvjg
- Main drive motor power 5.5/3.5 kW
- Total power requirement: 28.7 kW, 60 A
- Machine weight approx.: 4.4 t
- Space requirements approx. 8.0 x 2.7 x 2.3 m
EQUIPMENT:
- Control: FANUC T31i
- 1 pc. sub-spindle
- NC C-axis on main and sub-spindle
- Tool holders for 6 fixed turning tool holders, cross-section 12 x 12 mm
- Bar feeder, manuf. FMB Turbo Ø 3-36, year of manufacture: 2016
Guide channel DM12 + DM25
- Chip conveyor
- Electronic handwheel
- High-pressure system, manuf. KNOLL (Pump 1: 1-120 bar, pump 2 up to 50 bar)
with paper belt filtration system
- Fire suppression system, manuf. KRAFT & BAUER
- WPM4 - Tool and process monitoring "Genior Modular-Automatic Tool and Process Monitoring"
- Extraction system
- CE marking
- Documentation
Additional accessories available for purchase.
No guarantee for completeness and accuracy of technical details and equipment. Subject to prior sale.
Mažas skelbimas
Europa
557 km
Automatinis tekinimo staklės
MAIERMLK 26 F1.5
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, CNC Sliding Head Lathe | Manufacturer: MAIER | Model: MLK 26F1.5 | Year of manufacture: 2018
The machine can be inspected under power by appointment.
Condition: Well maintained, fully operational / ready for use.
Operating hours: approx. 28,797 h.
TECHNICAL DATA:
- Axes: 11
- Turning diameter over bed: 32 mm
- Spindle bore: 32 mm
- Channel 1/Z1 > Spindle stroke: 180 mm (as short turning lathe), 340 mm (as sliding head lathe)
- Main spindle speed: 6,000 rpm
- Spindle motor power: 5.5 / 3.7 kW
- Channel 2/Z2 > Turning length (sub-spindle): 340 mm
- Sub-spindle speed range: 8,000 rpm
- Collets: 1536E
- Drive motor power: 5.5 / 3.5 kW
- Total power requirement: 28.7 kW, 60 A
- Machine weight approx.: 4.4 t
- Space requirements approx.: 8.0 x 2.7 x 2.1 m
EQUIPMENT:
- CNC control: FANUC 31i-B
- 1 pc. sub-spindle
Itsdpfx Abey Sp Twjveg
- NC C-axis on main and sub-spindles
- Tool holders for 5 fixed turning tool holders, section 16 x 16 mm
- Bar feeder, make: FMB Turbo Ø 3-36, year of construction: 2018
Guide channel DM12
- Chip conveyor
- Electronic handwheel
- High-pressure coolant system, make: KNOLL, 50 bar with paper band filter system
- Fire protection system, make: KRAFT & BAUER
- Extraction unit
- CE marking
- Documentation
Additional accessories available for separate purchase.
No guarantee for completeness and accuracy of technical specifications and equipment. – Subject to prior sale –
Mažas skelbimas
Europa
557 km
Automatinis tekinimo staklės
MAIERML 20 C5Y2 Basic
Skambinti
Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, CNC Swiss-type automatic lathe | Manufacturer: MAIER | Model: ML 20 C5Y2 Basic | Year of manufacture: 2020
The machine can be inspected under power by prior appointment.
Condition: Fully functional, well maintained / ready for operation.
Operating hours: approx. 19,498 h
TECHNICAL DATA:
- Axes: 8
- Swing diameter over bed: 32 mm
- Spindle bore: 20 mm
- Channel 1/Z1 > Spindle stroke: 220 mm
- Main spindle speeds: 8,000 rpm
- Spindle motor: 5.5 / 3.7 kW
- Counter spindle bore: 20 mm
- Counter spindle speed range: 8,000 rpm
- Channel 2/Z2 > Turning length (counter spindle): 240 mm
- Collets 161E
- Drive motor power: 5.5 / 3.5 kW
- Total power requirement: 19.4 kW / 35 A
- Machine weight: approx. 4.2 t
- Space requirement: approx. 8.0 x 2.7 x 2.2 m
EQUIPMENT:
- Control: FANUC 31i-B
- 1x counter spindle
- NC C-axis on main and counter spindle
- Guide channel DM12
- Tool holders for 5 fixed turning tool holders, cross section 12 x 12 mm
- Bar feeder, manufacturer: FMB Turbo Ø 3-36, year: 2020
- Chip conveyor
Itedpey Sp Smsfx Abveg
- Electronic handwheel
- KNOLL high-pressure unit (50 bar) with paper band filter system
- Fire protection system, manufacturer: Kraft & Bauer
- Extraction unit
- CE marking
- Documentation
Additional accessories available, can be purchased separately.
No guarantee for completeness and accuracy of the technical data and equipment. Subject to prior sale.
Mažas skelbimas
Tallinn
476 km
Automatinis sukrovimas
WOODTEKWOOD STACK 3000
Skambinti
Gamybos metai: 2026, būklė: naujas, Siūlau visiškai naujus rietuvius, įskaitant visiškai naujus juostinius konvejerius, kurie įtraukti į komplektą su rietuviu.
Naujas dizainas
Nauja programa
Nauja valdymo sistema
CE ženklinimas
SEW varikliai šlavikliui, ilgio reguliavimui ir kėlimui
Šlaviklio ciklo laikas 0,5 sek.
Medinių lentų rietuvas (lentoms nuo 450 mm iki 3000 mm).
Galimi „plytiniai“, zigzaginiai ir įprasti rietuvimo būdai.
Pagaliukus galima pridėti kaip pasirenkamą priedą.
Techninė informacija:
Lentos ilgis 450–3000 mm
Plotis 50–200 mm
Storis 16–100 mm
Maks. lentos svoris 15 kg
Maks. sluoksnio svoris 100 kg
Paketo dydis 1200x1200 mm su palete (maks. 2000 kg)
Itedpfx Abey Tb Ivevjg
Mažas skelbimas
Tallinn
476 km
Automatinis sukrovimas
WOODTEKWOOD STACK 1500
Skambinti
Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, Siūlau visiškai naujus rietuvų kroviklius su CE žymėjimu
Naujas dizainas
Nauja programa
Nauja valdymo sistema
SEW varikliai ilgio reguliavimui ir kėlimui
SEW variklis šlavėjui, 60 lentų/min, arba atnaujinimas į servo – 120 lentų/min
Malkų rietuvas lentoms, kurių ilgis nuo 450 mm iki 1500 mm.
Galimi plytų, zigzago ir standartiniai rietimo būdai.
Pagaliukai gali būti pridedami pasirinktinai.
Techninė informacija:
Lentos ilgis: 450–1500 mm
Plotis: 50–200 mm
Storis: 16–100 mm
Maksimalus lentos svoris: 15 kg
Maksimalus sluoksnio svoris: 100 kg
Pakuotės dydis: 1200x1200 mm su palete (maks. 1500 kg)
Itedpfoy Tb Hxsx Abvog
Mažas skelbimas
Siedlce
352 km
Automatinis kolonų pjaustytuvas
CORMAKHR350SA przecinarka taśmowa do metalu
Skambinti
Būklė: naujas, Gamybos metai: 2026, The CORMAK H-350SA column band saw is a high-performance machine designed for automatic-cycle cutting of solid materials and profiles. Its robust body and sturdy saw frame, combined with the column-guided design, ensure excellent rigidity and an exceptional level of stability during cutting, even with the toughest-to-machine metals. The saw is equipped with a PLC controller and an easy-to-use touchscreen interface. A notable advantage of this model is its swiveling head, enabling cutting within a 0°–60° range—both in automatic and semi-automatic cycles—with smooth angle adjustment.
Manual and Automatic Modes: The saw allows for both manual operations from the control panel and fully automatic cutting cycles, eliminating the need for constant operator supervision.
Top Vice Clamp: The saw is adapted for bundle cutting.
Automatic Cutting Cycle: In automatic mode, the entire cutting process—including clamping the workpiece, feeding to the specified length, lowering the arm for cutting, and raising it after the cut—is executed without operator involvement.
Panel-Controlled Parameters: Cutting parameters such as piece count, workpiece dimensions, band speed, and others are all set and controlled via a user-friendly touchscreen control panel.
Robust Construction: The machine’s body is made of cast iron mounted on a rigid, space-frame base, providing outstanding rigidity and stability.
Band Drive System: A powerful three-speed motor, hydraulic band tensioning, cooling system, and cleaning brush ensure precise and efficient cutting performance.
Safety System: In case of blade breakage, the machine stops automatically, enhancing operational safety.
Hydraulic Material Feed System: This system allows the machine to operate in a fully automatic cycle with precise feed length adjustment.
Innovation and ISO Standards: Cormak ensures innovative solutions and production compliant with ISO 9001 and ISO 14001 standards, confirming high quality, safety, and product reliability.
Technical specifications:
Cutting capacity: Ø350 or 350 x 350 mm
Blade: 4515 x 34 x 1.1 mm
Cutting speeds: 27/45/69 m/min
Total power: 4.8 kW
Hydraulic unit: 0.75 kW
Coolant pump: 0.04 kW
Blade tensioning: hydraulic
Feeder stroke: 500 mm
Load capacity: 1500 kg
Table height: 700 mm
Dimensions: 2800 x 2200 x 1700 mm
Itsdswdunwjpfx Abveg
Weight: 1500 kg
Mažas skelbimas
Siedlce
352 km
Automatinis kolonų pjaustytuvas
CORMAKH-500SA przecinarka taśmowa do metalu
Skambinti
Būklė: naujas, Gamybos metai: 2026, The CORMAK H500SA automatic band saw is a technologically advanced dual-column metal cutting band saw, designed for precise and efficient cutting of large steel components, tubes, and profiles. Thanks to fully automated operation, high power, and robust construction, it is ideal for serial production and heavy-duty industrial applications.
Key machine features:
- Automatic cutting cycle – complete cutting sequence from loading to return of the saw arm is performed without operator intervention.
- Hydraulic vice and material feed – ensure quick, secure, and precise clamping and indexing of the workpiece.
- High cutting capacity – allows processing of workpieces up to Ø500 mm or 500 × 500 mm.
- Hydraulic blade tensioning – automatically maintains optimal tension, ensuring cutting stability.
- Integrated coolant system and powered blade cleaning brush – extend blade life and improve cut quality.
Construction and technology:
This machine is built on a heavy-duty cast iron and steel frame, guaranteeing high rigidity and minimizing vibrations during operation. The H500SA dual-column band saw is equipped with a 7.1 kW main motor and an independent hydraulic system. The saw frame is inclined at 3° to the working surface for enhanced effectiveness when cutting profiles and structural shapes.
The blade is guided via carbide-insert and ball-bearing supports for precise blade tracking. The movable blade guide adjusts to the width of the material, increasing cutting stability and reducing blade wear.
Precision and performance:
Hydraulically actuated saw arm downfeed with infinitely variable pressure adjustment enables optimal parameter selection for each material. The control panel with an LCD screen allows programming of cut quantity and lengths, as well as real-time monitoring of operational parameters. The machine automatically signals material end, errors, and cutting progress.
Applications:
The CORMAK H500SA is an industrial metal band saw recommended for:
- Steel fabrication shops
- Serial production in metalworking plants
- Cutting heavy steel tubes and profiles
- Wholesale processing of structural and tool steel
Standard equipment:
- Fully automatic operation
- Arm and vice position memory function
- Hydraulic power pack and feed
- Hydraulic blade tensioning
- Powered blade cleaning brush
- Coolant system
- Bi-metallic band saw blade
- CE declaration of conformity
Itedsyctwmepfx Abvog
- User manual (DTR)
Technical specifications:
Cutting capacity: Ø500 mm or 500 × 500 mm
Blade dimensions: 5550 × 41 × 1.3 mm
Blade speeds: 40 / 60 / 80 m/min
Main motor: 7.1 kW
Hydraulic power unit: 1.5 kW
Coolant pump: 0.09 kW
Blade tensioning: Hydraulic
Feeder stroke: 500 mm
Load capacity: 3 t
Table height: 600 mm
Overall dimensions (L×W×H): 2900 × 2200 × 1900 mm
Weight: 2400 kg
Mažas skelbimas
Siedlce
352 km
Automatinis kolonų pjaustytuvas
CORMAKH-300SA przecinarka taśmowa do metalu
Skambinti
Būklė: naujas, Gamybos metai: 2026, The automatic column-type band saw CORMAK H - 300SA is a high-performance machine designed for automatic cycle cutting of bars, pipes, and profiles made of steel, cast iron, and non-ferrous metals. Its robust saw frame and column construction ensure excellent rigidity and outstanding stability during the cutting process, even with the most challenging materials. The saw is equipped with a PLC controller and an intuitive touchscreen interface.
Manual mode allows all operations to be performed from the machine’s control panel.
Automatic mode – upon activation, the complete cutting cycle, including clamping the workpiece in the vise, advancing it to the selected length, lowering the saw arm for cutting, and raising the arm to the preset height after the cut, proceeds without operator intervention.
Cutting parameters such as number of cut pieces, their dimensions, blade speed, and descent speed are set via the control panel. The machine stops automatically upon completion of the programmed batch, in case of blade breakage, or if another fault is detected by the saw’s control system.
Iodpfx Asiz S Nysbvjtg
The blade drive, based on a frequency-inverter-controlled motor, provides smooth speed adjustment over a wide range. In the event of blade breakage, the machine halts automatically. Accurate blade guidance is ensured by guide bearings and carbide inserts. The movable blade guide head is set according to the size of the material, which enhances blade stability. A coolant system and cleaning brush prolong blade life and maintain optimal cutting conditions.
Hydraulically forced descent of the arm is precisely adjustable via a throttle valve. The rapid-feed system shortens cutting times for individual sections.
The hydraulic feed system enables a fully automatic operation cycle. The controller, equipped with an LCD display, facilitates programming of the saw, signals material end, displays errors, and provides a cut-piece counter after the programmed cycle. Maximum material feed per stroke is 500 mm, with accuracy of +/- 0.2 mm per stroke.
Technical Data:
Cutting capacity: ∅ 300 mm / □ height 300 mm x width 300 mm
Bundle cutting: max 260 x 90 mm
Blade (length x width x thickness): 3505x27x0.9 mm
Cutting speeds: 40/60/80 m/min
Feed speed: hydraulic, stepless adjustment
Motor: 3.8 kW
Hydraulic unit: 0.75 kW
Coolant pump: 0.09 kW
Feeder stroke: 500 mm
Load capacity: 1500 kg
Dimensions (L x W x H): 1750 x 1950 x 1550 mm
Weight: 1200 kg
Mažas skelbimas
Siedlce
352 km
Automatinis kolonų pjaustytuvas
CORMAKH-260SA przecinarka taśmowa do metalu
Skambinti
Būklė: naujas, Gamybos metai: 2026, The CORMAK H - 260 SA Automatic Column Band Saw is a high-performance machine designed for automatic cutting cycles of bars, pipes, and profiles made from steel, cast iron, and non-ferrous metals. A robust body and heavy-duty saw frame combined with a column design ensure excellent rigidity and an exceptional level of stability during the cutting of even the most challenging materials. The saw is equipped with a PLC controller and a user-friendly touchscreen interface.
This saw allows for operation in both manual and automatic modes.
Manual Mode enables all operations to be performed manually from the machine’s control panel.
Automatic Mode – once the machine is started, the entire cutting cycle, i.e., clamping the workpiece in the vise, feeding it to the set length towards the saw blade, lowering and raising the saw arm to the required height after the cut, takes place automatically, without the need for operator intervention.
Cutting parameters such as the number of cut pieces, their dimensions, saw blade speed, and arm descent rate are set on the control panel. The machine will automatically stop at the end of the programmed series, in the event of a blade breakage, or in case of other faults detected by the machine’s control system.
The machine body is a cast iron component mounted on a rigid, heavy-duty frame. The enclosure houses the hydraulic unit, coolant tank with pump, and swarf conveyor.
The blade drive uses an inverter-controlled motor, allowing for smooth and wide-range speed adjustment. The hydraulic blade tensioner provides optimal working conditions. In the event of blade breakage, the machine stops automatically. Maximum cutting performance and extended blade life are ensured by the cooling system and a cleaning brush.
A hydraulic material feeder delivers a fully automatic working cycle. The controller, equipped with an LCD display, enables programming of all saw functions, indicates material end, reports faults, and provides data on the number of cuts after the programmed cycle. Maximum feed length per single stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke.
The innovative design and manufacture of CORMAK semi-automatic and automatic band saws according to ISO:90001 and ISO:140001 standards guarantee safety, quality, and reliability. Reliable operation is further assured by the use of motors licensed by ABB, a world-renowned industry leader.
Technical Data
Cutting range: Ø260 or 260 x 260 mm
Blade: 3150 x 27 x 0.9 mm
Cutting speeds: 40/60/80 m/min
Motor: 2.2 kW
Hydraulic power unit: 0.75 kW
Coolant pump: 0.09 kW
Feeder stroke: 500 mm
Load capacity: 1500 kg
Dimensions: 1600 x 1800 x 1550 mm
Weight: 1000 kg
Maximum cutting range
Angle
0º ø260 | 260 × 260 mm
Standard Equipment
- Automatic cycle operation
- Arm position memory function
- Built-in hydraulic unit
- Vise position memory function
- Variable cutting speeds
- Driven blade cleaning brush
Itsdpfx Asiz S I Hjbveg
- Cooling system
- Bimetal band saw blade
- CE Declaration of Conformity
- User manual (DTR) in Polish and English
For more information, please visit our website.
Mažas skelbimas
Siedlce
352 km
Automatinis kolonų pjaustytuvas
CORMAKH-400SA przecinarka taśmowa do metalu
Skambinti
Būklė: naujas, Gamybos metai: 2026, The CORMAK H400SA automatic bandsaw is a high-performance machine designed for precise and repeatable cutting of large steel workpieces, pipes, and box sections. Its dual-column construction and automated work cycle make it an ideal solution for manufacturing plants, metalworking shops, and logistics centers processing large volumes of material.
Main machine advantages
- Automatic operation – a complete cutting cycle without operator intervention: from material clamping, through cutting, to arm return.
- Hydraulic feed and vise – ensure fast, safe, and precise cutting.
- Memory for arm and vise positions – reduces cycle time and increases efficiency in series production.
- Cooling system and driven band cleaning brush – extend the service life of the metal bandsaw blade.
- Large cutting capacity – able to cut materials up to Ø400 mm or 400 × 400 mm.
Construction and technology
The dual-column H400SA bandsaw features a robust steel structure with a cast iron body, guaranteeing maximum rigidity and vibration damping. The frame is set at a 3° angle relative to the feed table, facilitating the cutting of profiles and shaped sections.
Precision and work efficiency
The hydraulically controlled descent of the arm, with adjustable cutting force and a precise throttle valve, allows pressure to be adapted to the specific material. The hydraulic feeding system with an electronic controller allows programming of cut length and batch quantity. An LCD display provides information on progress, errors, and material end. An automatic stop function reacts to fault detection or completion of the cutting program.
Applications
The CORMAK H400SA is ideally suited for:
- metalworking and steel construction industries,
- profile and section processing centers,
- series production in metal shops and industrial plants,
- logistics companies cutting materials to size.
Standard equipment
- Automatic work cycle
- Memory for arm and vise positions
- Hydraulic unit and feeding system
- Driven band cleaning brush
- Liquid cooling system
- Bimetal bandsaw blade
- CE declaration of conformity
Isdpfx Aoyctr Rjbvstg
- Operating manual (DTR)
Cutting range: Ø400 mm or 400 × 400 mm
Blade dimensions: 4900 × 41 × 1.3 mm
Blade speeds: 40 / 60 / 80 m/min
Main motor: 4.6 kW
Hydraulic unit: 1.5 kW
Coolant pump: 0.09 kW
Feeder stroke: 500 mm
Dimensions (L × W × H): 2600 × 2400 × 1700 mm
Weight: 1800 kg
Mažas skelbimas
Skarżysko-Kamienna
493 km
Automatinės purškimo kameros su dryinu
ROMERAutomatyczna myjka
Skambinti
Gamybos metai: 2020, būklė: naujas, The automatic car wash is a solution that allows you to reduce costs, improve quality, and increase the efficiency of the surface preparation process.
The automatic car wash facility is equipped with a set of spray pumps. It is designed to ensure that as little liquid as possible remains after the process migrates to subsequent stages, saving money and improving wash quality.
This is very important, as apparent savings in systems that operate without these solutions can lead to significantly higher costs in the future, related to chemicals and waste disposal, which will simply be higher. Attention should also be paid to issues regarding compliance with the required bath parameters.
Research and development have enabled us to develop a car wash system with an optional component drying feature, where hot air is blown by a series of fans after the washing process is complete.
The car wash is equipped with an advanced system for creating user-defined macro programs, which can consist of up to 10 steps per tank according to the number of tanks. Processes can be repeated, their order changed, and so forth.
Each tank has its own symbol and name, enabling the operator to work intuitively.
Iodpofzq Stsfx Abvetg
Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out between processes or at the end of the cycle, for example.
• Controls installed on the swivel arm for better access
• PLC microprocessor control
• 7" touch operating panel
• Significantly larger number of nozzles compared to other solutions
• (Option) Ability to dry components after the washing process
• Ability to create custom advanced programs
• Advanced damper system made from acid-resistant sheet metal, double-protected by limit switches
• Monitoring system for secure sealing and opening of the full flap
• To minimize fluid mixing: separate piping, nozzles, and tanks for each treatment
• Intelligent control – in the event of a power failure or sudden shutdown, fluid mixing is not possible
• Fully automatic operation
Prices are specified in the catalog.
Mažas skelbimas
Skarżysko-Kamienna
493 km
Automatinė poveržlė
ROMERMAut
Skambinti
Gamybos metai: 2020, būklė: naujas, An automatic car wash system is a solution that enables you to reduce costs, improve quality, and enhance the efficiency of the surface preparation process.
The automatic car wash is equipped with a set of pumps for spraying. It has been designed to ensure that as little liquid as possible is carried over into subsequent processes after washing, thereby saving money and improving wash quality. This is crucial, as the apparent savings obtained in systems that do not employ these solutions can ultimately result in significantly higher costs associated with the disposal of chemicals and waste, which will inevitably be greater. Additionally, attention must be given to maintaining the required bath parameters.
Research and development efforts have allowed us to engineer a car wash system with an optional detail drying function, where after washing, hot air is blown by a fan to dry components.
The car wash is equipped with an advanced system for creating custom macro programs, which, depending on the number of tanks, can each consist of up to 10 steps. These sequences can be repeated, their order rearranged, and more.
Each tank features its own icon and designation, enabling intuitive operation for the user.
Optionally, the tanks can be fitted with bath replenishment systems, allowing refilling either between processes or at the end of a cycle, for example.
• Controls mounted on a swivel arm for improved operator access
• PLC microprocessor control system
• 7” touch control panel
• Significantly higher number of spray nozzles compared to other solutions
• (Option) Drying function available after washing
• Capability to create custom advanced programs
• Advanced damper system constructed from acid-resistant sheet steel, double-secured with limit switches
• Control system for tightly closing and fully opening flaps
• To minimise fluid mixing, separate lines, nozzles, and tanks for each treatment
• Smart control – in the event of a power outage or sudden shutdown, fluids cannot mix
• Fully automatic operation
Itsdefz I Hxepfx Abvsg
Mažas skelbimas
Skarżysko-Kamienna
493 km
Automatinė poveržlė
ROMERMAut
Skambinti
Gamybos metai: 2020, būklė: naujas, An automatic car wash system is a solution that enables you to reduce costs, improve quality, and enhance the efficiency of the surface preparation process.
The automatic car wash is equipped with a set of pumps for spraying. It has been designed to ensure that as little liquid as possible is carried over into subsequent processes after washing, thereby saving money and improving wash quality. This is crucial, as the apparent savings obtained in systems that do not employ these solutions can ultimately result in significantly higher costs associated with the disposal of chemicals and waste, which will inevitably be greater. Additionally, attention must be given to maintaining the required bath parameters.
Research and development efforts have allowed us to engineer a car wash system with an optional detail drying function, where after washing, hot air is blown by a fan to dry components.
The car wash is equipped with an advanced system for creating custom macro programs, which, depending on the number of tanks, can each consist of up to 10 steps. These sequences can be repeated, their order rearranged, and more.
Each tank features its own icon and designation, enabling intuitive operation for the user.
Optionally, the tanks can be fitted with bath replenishment systems, allowing refilling either between processes or at the end of a cycle, for example.
• Controls mounted on a swivel arm for improved operator access
Itodpfxefz Nblj Abveg
• PLC microprocessor control system
• 7” touch control panel
• Significantly higher number of spray nozzles compared to other solutions
• (Option) Drying function available after washing
• Capability to create custom advanced programs
• Advanced damper system constructed from acid-resistant sheet steel, double-secured with limit switches
• Control system for tightly closing and fully opening flaps
• To minimise fluid mixing, separate lines, nozzles, and tanks for each treatment
• Smart control – in the event of a power outage or sudden shutdown, fluids cannot mix
• Fully automatic operation
Mažas skelbimas
Skarżysko-Kamienna
493 km
Automatinė purškimo kabina
ROMER AutomatAutomatic spray booth
Skambinti
Gamybos metai: 2020, būklė: naujas, The use of a photocell in the workpiece area allows measurement of its length, thereby enabling activation of the spray guns when the workpiece enters detection range, and deactivation of the guns immediately after coating is completed. The photocell is provided as standard equipment.
Workpiece identification is carried out using special tags.
Identification plates with holes are mounted on the workpiece hanger.
Based on this, the PLC controller, in conjunction with the photocell, identifies the painted item and activates or deactivates the spray guns at the appropriate moment, resulting in savings of both energy and powder coating material.
Vertical contour detection of the workpiece shape:
The use of light barriers with horizontal sensors enables the PLC to analyze the vertical profile of the workpiece.
The PLC controller calculates the time at which the workpiece should appear in the gun zone; based on this, selective activation or deactivation of the spray guns is possible.
Iedofy T Arspfx Abvjtg
Integration of light barriers with multiple sensors, both horizontally and vertically:
This approach enables precise measurement of the workpiece’s dimensions, which also allows for manipulator control if required.
The benefits of using photocells or light barriers are primarily the savings in powder and energy.
Unnecessary spraying is eliminated in areas where no workpiece is present.
Precise gun control is achieved through the use of light barriers.
Mažas skelbimas
Skarżysko-Kamienna
493 km
Automatinės purškimo kameros su dryinu
ROMER / Catalog pricesAutomat
Skambinti
Gamybos metai: 2020, būklė: naujas, The automatic car wash is a solution that allows you to reduce costs, improve quality, and increase the efficiency of the surface preparation process.
The automatic car wash facility is equipped with a set of spray pumps. It is designed to ensure that as little liquid as possible remains after the process migrates to subsequent stages, saving money and improving wash quality.
This is very important, as apparent savings in systems that operate without these solutions can lead to significantly higher costs in the future, related to chemicals and waste disposal, which will simply be higher. Attention should also be paid to issues regarding compliance with the required bath parameters.
Research and development have enabled us to develop a car wash system with an optional component drying feature, where hot air is blown by a series of fans after the washing process is complete.
The car wash is equipped with an advanced system for creating user-defined macro programs, which can consist of up to 10 steps per tank according to the number of tanks. Processes can be repeated, their order changed, and so forth.
Each tank has its own symbol and name, enabling the operator to work intuitively.
Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out between processes or at the end of the cycle, for example.
• Controls installed on the swivel arm for better access
• PLC microprocessor control
• 7" touch operating panel
• Significantly larger number of nozzles compared to other solutions
• (Option) Ability to dry components after the washing process
• Ability to create custom advanced programs
• Advanced damper system made from acid-resistant sheet metal, double-protected by limit switches
• Monitoring system for secure sealing and opening of the full flap
• To minimize fluid mixing: separate piping, nozzles, and tanks for each treatment
• Intelligent control – in the event of a power failure or sudden shutdown, fluid mixing is not possible
Itodpfx Aboflmdbovsg
• Fully automatic operation
Prices are specified in the catalog.
Mažas skelbimas
Skarżysko-Kamienna
493 km
Automatinės miltelių kabinos
ROMER / Catalog prices
Skambinti
Gamybos metai: 2020, būklė: naujas, Automation
Use of a photoelectric cell
The use of a photoelectric cell in the workpiece area allows you to measure the length of the workpiece, giving you the capability to activate the spray guns only when the object is within range, and to deactivate the guns immediately after processing is complete. The photoelectric cell is included in the standard equipment package.
Identification of parts using special tags.
A plate with identification holes is placed over the hanger. Based on this, the PLC, together with the photoelectric cell, identifies the coated part, activates or deactivates the guns at the correct time, thereby reducing energy and powder consumption.
Vertical detection of workpiece features.
By using light barriers with horizontal sensors, the PLC can analyze the vertical shape of the workpiece. The PLC calculates the timing for when the part is due to appear in the gun area, allowing for selective activation or deactivation of the guns.
Use of light barriers with multiple horizontal and vertical sensors.
This solution enables precise measurement of the dimensions of the workpiece, allowing manipulators to be adjusted as well.
Advantages of using gates and photoelectric cells
The main advantages of using photoelectric cells or light barriers are energy and powder savings. It eliminates coating zones without workpieces. By using light barriers, precise gun control is achieved. Our lines can optionally be equipped with photoelectric cells or light barriers.
The use of a photoelectric cell in the workpiece area allows you to measure the length of the workpiece and, therefore, to activate spray guns only when the object is within their operational range, and to deactivate the gun immediately upon completion of coating.
Identification of parts with special tags
A plate with identification holes is placed over the hanger. Based on this, the PLC, together with the photoelectric cell, recognizes the coated part, switching the guns on or off at the appropriate time – thereby saving energy and powder.
By using light barriers with horizontal detectors, the PLC can analyze the vertical geometry of the workpiece. The PLC determines when the part will appear in the gun chamber, enabling selective activation or deactivation of the spray guns.
Use of light barriers with multiple horizontal and vertical sensors
This solution allows for the precise measurement of the workpiece's dimensions, enabling adjustment of the manipulators.
Isdpfx Aeflq Spobvetg
The primary benefits of using photoelectric cells or light barriers are powder and energy savings. It eliminates painting areas without workpieces. Using light barriers ensures precise gun control.
Vertical array of spray guns
8 pcs. guns
Control – profiControl 10"
Cyclone – CK-D1250
Dust collector – OZ-8H
Center – RP-01 + SV-200
Manipulator MA1-23 x 2 pcs.
Axis X MX-100 x 2 pcs.
Horizontal gate – Horizontal gate W400 x 2 units
Vertical gate – H2000 vertical gate
The maximum coating speed is 1.65714285714286 m/min
0 pcs. tractors
Air volume required: 10,188 m³/h for operation
Minimum cabin passage required: W900mm H2100mm
Duct diameter 500 mm – minimum 16.9 m/s 16 m/s
Air consumption: 1210 l/min + Sug. SC-20 compressor
Min. St
Mažas skelbimas
Skarżysko-Kamienna
493 km
Dažai automatiniai, hibridiniai, rankiniai
ROMER-Lakiernie-automatyczne,hybrydowePower&free, poprzeczny krzyżowy,łańcuch
Skambinti
Gamybos metai: 2020, būklė: naujas, ROMER® specializes in the manufacture of individual technological devices for powder coating systems, as well as complete fully automatic turnkey coating installations. ROMER® provides heating solutions for the aerospace and automotive industries, serving the largest companies in the world.
We offer warranty and post-warranty service for equipment sold by us, including a comprehensive range of spare parts.
A mesh applied to a poorly prepared surface will peel off or corrode after a short period. Ensuring the best coating essentially relies on proper degreasing—the foundation of any painting process. The coating applied to inadequately degreased parts will detach very quickly. After degreasing, the next step is to roughen the outer layer of the part, which improves paint adhesion (e.g., when bending sheet metal) and also provides protection, such as through a phosphate coating, which in turn extends corrosion resistance.
There are many solutions to address these issues. What is the most important factor in a powder coating workshop? You might assume it is the applicator. This is a misconception—even the best applicator cannot help if your oven has poor temperature distribution. If the part overheats in a certain area, the paint will discolor, and if it does not heat properly, the paint will peel off.
The most crucial component is the oven.
Oil, gas, or electric oven?
Unsure how to power your oven? Which method is more cost-effective? What are the implications? What are the operating costs?
We will try to answer your questions.
Depending on customer requirements, transport systems can be moved on the floor or suspended from rails.
Iodpfx Abjfz Ndysvstg
- For convenient solutions in manual applications, we recommend overhead cross-tracks (lateral transport).
- In automated systems, chain conveyors are most commonly used. These operate continuously and are an excellent solution for companies focusing on process quality and repeatability.
- For companies that manufacture different items simultaneously and, for example, operate several booths with different colors, flexible solutions using non-powered conveyors are utilized. However, this is the most expensive solution.
Mažas skelbimas
Skarżysko-Kamienna
493 km
Automatinės purškimo kameros su dryinu
ROMER / Myjnie automatyczneAutomat
Skambinti
Gamybos metai: 2020, būklė: naujas, The automatic car wash is a solution that allows you to reduce costs, improve quality, and increase the efficiency of the surface preparation process.
The automatic car wash facility is equipped with a set of spray pumps. It is designed to ensure that as little liquid as possible remains after the process migrates to subsequent stages, saving money and improving wash quality.
This is very important, as apparent savings in systems that operate without these solutions can lead to significantly higher costs in the future, related to chemicals and waste disposal, which will simply be higher. Attention should also be paid to issues regarding compliance with the required bath parameters.
Research and development have enabled us to develop a car wash system with an optional component drying feature, where hot air is blown by a series of fans after the washing process is complete.
The car wash is equipped with an advanced system for creating user-defined macro programs, which can consist of up to 10 steps per tank according to the number of tanks. Processes can be repeated, their order changed, and so forth.
Each tank has its own symbol and name, enabling the operator to work intuitively.
Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out between processes or at the end of the cycle, for example.
• Controls installed on the swivel arm for better access
• PLC microprocessor control
• 7" touch operating panel
Itodpfefy T Szox Abvjg
• Significantly larger number of nozzles compared to other solutions
• (Option) Ability to dry components after the washing process
• Ability to create custom advanced programs
• Advanced damper system made from acid-resistant sheet metal, double-protected by limit switches
• Monitoring system for secure sealing and opening of the full flap
• To minimize fluid mixing: separate piping, nozzles, and tanks for each treatment
• Intelligent control – in the event of a power failure or sudden shutdown, fluid mixing is not possible
• Fully automatic operation
Prices are specified in the catalog.
Mažas skelbimas
Skarżysko-Kamienna
493 km
Manipuliatorius, dažų purkštuvas, automatinis m
ROMERMA2-18H,MA2-24H,MA2-30H,MA2-18L,MA2-24L
Skambinti
Gamybos metai: 2020, būklė: naujas, ROMER manipulators are distinguished by their quiet operation.
Iodof Aad Nepfx Abvjtg
They can handle both simple, common processes as well as complex, multi-dimensional tasks.
Programming is performed via a PLC control system.
Capable of operating with both long and short strokes.
The toothed belt drive ensures quiet running.
Maintenance-free AC motor.
Slim column design saves space.
The robust construction of the manipulators provides high versatility and stability.
The manipulator is equipped with a 7" touch panel or can be controlled externally via the ModBus protocol using RJ45 cables.
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Skarżysko-Kamienna
493 km
Dažai automatiniai, hibridiniai, rankiniai
ROMER-Lakiernie-automatyczne,hybrydowePower&free, poprzeczny krzyżowy,łańcuch
Skambinti
Gamybos metai: 2020, būklė: naujas, ROMER® specializes in the manufacture of individual technological devices for powder coating systems, as well as complete fully automatic turnkey coating installations. ROMER® provides heating solutions for the aerospace and automotive industries, serving the largest companies in the world.
We offer warranty and post-warranty service for equipment sold by us, including a comprehensive range of spare parts.
A mesh applied to a poorly prepared surface will peel off or corrode after a short period. Ensuring the best coating essentially relies on proper degreasing—the foundation of any painting process. The coating applied to inadequately degreased parts will detach very quickly. After degreasing, the next step is to roughen the outer layer of the part, which improves paint adhesion (e.g., when bending sheet metal) and also provides protection, such as through a phosphate coating, which in turn extends corrosion resistance.
Iedeflrc Sjpfx Abvjtg
There are many solutions to address these issues. What is the most important factor in a powder coating workshop? You might assume it is the applicator. This is a misconception—even the best applicator cannot help if your oven has poor temperature distribution. If the part overheats in a certain area, the paint will discolor, and if it does not heat properly, the paint will peel off.
The most crucial component is the oven.
Oil, gas, or electric oven?
Unsure how to power your oven? Which method is more cost-effective? What are the implications? What are the operating costs?
We will try to answer your questions.
Depending on customer requirements, transport systems can be moved on the floor or suspended from rails.
- For convenient solutions in manual applications, we recommend overhead cross-tracks (lateral transport).
- In automated systems, chain conveyors are most commonly used. These operate continuously and are an excellent solution for companies focusing on process quality and repeatability.
- For companies that manufacture different items simultaneously and, for example, operate several booths with different colors, flexible solutions using non-powered conveyors are utilized. However, this is the most expensive solution.
Mažas skelbimas
Skarżysko-Kamienna
493 km
Automatinė poveržlė
ROMERMAut
Skambinti
Gamybos metai: 2020, būklė: naujas, An automatic car wash system is a solution that enables you to reduce costs, improve quality, and enhance the efficiency of the surface preparation process.
The automatic car wash is equipped with a set of pumps for spraying. It has been designed to ensure that as little liquid as possible is carried over into subsequent processes after washing, thereby saving money and improving wash quality. This is crucial, as the apparent savings obtained in systems that do not employ these solutions can ultimately result in significantly higher costs associated with the disposal of chemicals and waste, which will inevitably be greater. Additionally, attention must be given to maintaining the required bath parameters.
Research and development efforts have allowed us to engineer a car wash system with an optional detail drying function, where after washing, hot air is blown by a fan to dry components.
The car wash is equipped with an advanced system for creating custom macro programs, which, depending on the number of tanks, can each consist of up to 10 steps. These sequences can be repeated, their order rearranged, and more.
Each tank features its own icon and designation, enabling intuitive operation for the user.
Optionally, the tanks can be fitted with bath replenishment systems, allowing refilling either between processes or at the end of a cycle, for example.
Itedpfx Aefy T Rcobveg
• Controls mounted on a swivel arm for improved operator access
• PLC microprocessor control system
• 7” touch control panel
• Significantly higher number of spray nozzles compared to other solutions
• (Option) Drying function available after washing
• Capability to create custom advanced programs
• Advanced damper system constructed from acid-resistant sheet steel, double-secured with limit switches
• Control system for tightly closing and fully opening flaps
• To minimise fluid mixing, separate lines, nozzles, and tanks for each treatment
• Smart control – in the event of a power outage or sudden shutdown, fluids cannot mix
• Fully automatic operation
Mažas skelbimas
Skarżysko-Kamienna
493 km
Dažai automatiniai, hibridiniai, rankiniai
ROMER / Catalog pricesPower&free, poprzeczny krzyżowy,łańcuch
Skambinti
Gamybos metai: 2020, būklė: naujas, ROMER® specializes in the manufacture of individual technological devices for powder coating systems, as well as complete fully automatic turnkey coating installations. ROMER® provides heating solutions for the aerospace and automotive industries, serving the largest companies in the world.
We offer warranty and post-warranty service for equipment sold by us, including a comprehensive range of spare parts.
A mesh applied to a poorly prepared surface will peel off or corrode after a short period. Ensuring the best coating essentially relies on proper degreasing—the foundation of any painting process. The coating applied to inadequately degreased parts will detach very quickly. After degreasing, the next step is to roughen the outer layer of the part, which improves paint adhesion (e.g., when bending sheet metal) and also provides protection, such as through a phosphate coating, which in turn extends corrosion resistance.
There are many solutions to address these issues. What is the most important factor in a powder coating workshop? You might assume it is the applicator. This is a misconception—even the best applicator cannot help if your oven has poor temperature distribution. If the part overheats in a certain area, the paint will discolor, and if it does not heat properly, the paint will peel off.
The most crucial component is the oven.
Oil, gas, or electric oven?
Unsure how to power your oven? Which method is more cost-effective? What are the implications? What are the operating costs?
We will try to answer your questions.
Iodpfx Abjfz A H Djvjtg
Depending on customer requirements, transport systems can be moved on the floor or suspended from rails.
- For convenient solutions in manual applications, we recommend overhead cross-tracks (lateral transport).
- In automated systems, chain conveyors are most commonly used. These operate continuously and are an excellent solution for companies focusing on process quality and repeatability.
- For companies that manufacture different items simultaneously and, for example, operate several booths with different colors, flexible solutions using non-powered conveyors are utilized. However, this is the most expensive solution.
Mažas skelbimas
Radom
459 km
Automatinis rišiklis
Bacciottini Pit Stop AF High Speed Automatic Creaser
Skambinti
Būklė: geras (naudotas), Bacciottini Pit Stop AF didelio greičio automatinis biguoklis
Pilnai veikiantis ir paruoštas naudojimui.
Pagamintas 2018 m.
Tai efektyviausia rinkoje bigavimo ir perforavimo sistema su tvirta konstrukcija.
Pagaminta Italijoje.
Nepertraukiamas vakuuminis padavimas su galimybe papildyti medžiagą darbo metu.
Du nepriklausomi kompresoriai (siurbimas ir oro srautas).
Komplekte yra bigavimo ir perforavimo įrankiai.
Įrenginys padidintu formatu iki 1000 mm. Techniniai duomenys:
Didžiausias lapo dydis: 500×1000 mm
Mažiausias lapo dydis: 100×150 mm
Maksimalus greitis (A4 formatui): 10 500 lapų/val.
Medžiagos svoris: 80–600 GSM
Itodpfx Abjy Nzkvsvjg
Didžiausias bigavimo linijų skaičius lape: 100
Tarpas tarp linijų: 0,1 mm
Nustatymo tikslumas: 0,1 mm
Maitinimo įtampa: 400 V
Maksimali galia: 3,5 kW
Svoris: 233 kg
Išmatavimai: 170 x 85 x 120 cm
Palengviname jums paiešką: "prekybos automatas"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.






































































































































































