Mc3 Valdymas Krauss-Maffei pirkti naudotą (16 297)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 30 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 000 kN, varžto skersmuo: 95 mm, darbinio tūrio: 3 367 cm³, Clamping force: 8000 kN Maximum tool opening force: 560 kN Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate (H x V): 1600 x 1550 mm Clear space (H x V): 1120 x 1000 mm Kledpfsymn Rvox Amkjt Mould opening stroke: 1600 mm Mould installation height min./max.: 500 / 1100 mm Maximum opening width: 2100 mm Ejector stroke: 300 mm Ejector force fwd/rev: 200/100 kN Injection Unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection rate: 690 ccm/s Screw speed: 116 rpm Plasticising rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic Equipment: Pump motor rated power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil capacity: 1500 ltr. Dimensions and Weights: Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44500 kg Max. mould weight: 12200 kg Accessories: - Vibration-damping elements Additional equipment: - 1 x air valve - Tie bar retraction device - 3 x hydraulic core pullers at moving platen - 2 x hydraulic core pullers at fixed platen - 20 x hot runner control zones - Robot interface according to Euromap 67

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 50 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 000 kN, varžto skersmuo: 95 mm, darbinio tūrio: 3 367 cm³, Clamping force: 8000 kN Maximum tool opening force: 560 kN Kledpfx Ajymn Nfemkst Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate (H x V): 1600 x 1550 mm Clear space (H x V): 1120 x 1000 mm Mould opening stroke: 1600 mm Mould installation height min./max.: 500 / 1100 mm Maximum opening width: 2100 mm Ejector stroke: 300 mm Ejector force fwd/rev: 200/100 kN Injection Unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection rate: 690 ccm/s Screw speed: 116 rpm Plasticising rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic Equipment: Pump motor rated power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil capacity: 1500 ltr. Dimensions and Weights: Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44500 kg Max. mould weight: 12200 kg Accessories: - Vibration-damping elements Additional equipment: - 1 x air valve - Tie bar retraction device - 3 x hydraulic core pullers at moving platen - 2 x hydraulic core pullers at fixed platen - 20 x hot runner control zones - Robot interface according to Euromap 67

Būklė: geras (naudotas), Gamybos metai: 2007, veikimo valandos: 47 963 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 200 kN, For sale is an injection molding machine from KraussMaffei, model KM 200-220/220 CZ Multinject. The machine is in fully functional and well-maintained condition. Technical data: Year of manufacture: 2007 Clamping force: 200 t Injection units: 2 Automatic operating hours: 47,963 Dimensions: 5200 × 2200 × 2700 mm Weight: 11,500 kg Further technical details will follow shortly. The offer applies only to the machine itself; any peripheral equipment visible in the photos is not included in the offer. Ksdjrvimbopfx Amkslt Upon request and for an additional fee, loading and transportation (across Europe) can be organized. Prices are subject to VAT. Viewing is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange is possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your own? For more information or contact options, please visit our website.

Gamybos metai: 2004, būklė: geras (naudotas),

Gamybos metai: 2008, būklė: geras (naudotas), For sale is an injection moulding machine from Krauss Maffei, model KM 110-380. The machine is in good to very good condition; all maintenance and inspections have been carried out. Technical data: Year of manufacture: 2008 Extended tie bars Pneumatic needle shut-off 2x hydraulic core pullers 31,000 operating hours Cylinder diameter: 35 mm Clamping force: 1,100 kN Mould opening force: 70 kN Euromap 63 interface for version > 1-04-09 Nitrogen accumulator available Included components: Wedge shoes with screws and nuts Double-bit key Declaration of conformity, complete control cabinet Certificate USB memory stick Mechanical ejector coupling, supplied in the control cabinet Kjdeibyatepfx Amkslt All prices plus VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or do you want to sell your machine? For more information or to contact us, please visit our website.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, varžto skersmuo: 40 mm,

Gamybos metai: 2004, būklė: paruoštas naudoti (naudotas), For sale is an injection moulding machine from Krauss-Maffei, model 125-520 C2. The machine comes from a facility that places high value on cleanliness and regular maintenance. Year of manufacture: 2004 Kjdpolkbhwefx Amkslt Pneumatic needle shut-off 2x hydraulic core pulls 83,000 operating hours Clamping force: 1,500 kN MC 4 control with colour monitor and integrated control panel 4 additional cylinders included: 1 x D35 / 2 x D40 / 1 x D45 Prices are subject to VAT. Inspection by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, veikimo valandos: 28 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 300 kN, For sale is a KraussMaffei hybrid injection moulding machine, 2-component model, type KM 130-750 CX. The machine is in very good condition, immediately operational, and has low operating hours. It features electronic injection and dosing units, as well as a hydraulic clamping unit. Technical data: Year of manufacture: 2011 Operating hours: 28,000 h Clamping force: 130 t Cylinder Ø 30 mm / 40 mm (plus 2x 50 mm additionally included) Core pull: 1x hydraulic Needle shut-off: pneumatic Tie-bar extension: 160 mm Cavity pressure transducer Kljdsu Hxm Ujpfx Amkot Selector valve Transport and loading can be organised across Europe for an additional charge upon request. All prices are subject to VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, visit our website.

Būklė: geras (naudotas), Gamybos metai: 2004, spaudimo jėga: 800 kN, varžto skersmuo: 35 mm, For sale is an injection moulding machine from Krauss-Maffei, model 80-220C2. The machine comes from a well-maintained facility that places great value on regular servicing, and is fully operational immediately after installation. Year of manufacture: 2004 Machine number: 61004709 Clamping force: 80 tons Equipment: - Cylinder D35 - 1 hydraulic core pull - Pneumatic needle shut-off - Tie bar puller on the operator’s side Transport and loading can be organised Europe-wide on request and for an additional charge. Prices are subject to VAT. Inspection by appointment is possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery buying / selling Kledpfxewqmvgs Amkjt PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, visit our website.

Gamybos metai: 2011, būklė: paruoštas naudoti (naudotas), Working area: 2800x1600mm, swivel angle: 90°, parallel stroke: 150mm, clamping force: 700kN, connected load: 50kW, including documentation. Kedpoh Nm S Hsfx Amkslt

Gamybos metai: 1996, būklė: paruoštas naudoti (naudotas), Throughput capacity: 140-180 kg/h, screw diameter: 50-103 mm, screw length: 1300 mm, max. screw speed: 43 rpm, connected load: 25 kW, operating hours: 62,590 h, including dosing unit with hopper, vacuum pump, cylinder cooling unit, and screw temperature control. Kledpohz Dyajfx Amket

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Krauss Maffei Injection Moulding Machine KM 160–750 CX Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 10 mm Nozzle orifice: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mould opening force: 86.4 kN Moving platen force: Opening: 44.8 kN Closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mould opening stroke: 650 mm Kodpfjx Thzpox Amkjlt Minimum mould height: 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Injection volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard / option): 390 / 490 rpm Electrical and Hydraulic Equipment Nominal pump motor power: 22 kW Installed heating power: 10.97 kW Number of heating zones (barrel): 5 Dry cycle time (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Krauss Maffei KM 800-5000 MC liejimo mašina Pagaminimo metai: 2001 Įranga: robotas Techninės detalės: Uždarymo jėga: 8 000 kN Maksimali formos atidarymo jėga: 356 kN Judančios plokštės eiga (atidarymas): 98 kN Judančios plokštės jėga (uždarymas): 92 kN Plokščių dydis (plotis × aukštis): 1 610 × 1 530 mm Kolonų atstumas (plotis × aukštis): 1 120 × 1 000 mm Formos atidarymo eiga: 1 400 mm Kledpfxex Tfyij Amket Minimali formos aukštis: 600 mm Maksimalus atidarymas: 2 000 mm Hidraulinio stūmiko eiga: 250 mm Sraigto skersmuo: 90 mm L/D santykis: 23 Įpurškimo slėgis: 1 742 bar Įpurškimo tūris: 2 863 cm³ Įpurškimo masė (PS): 2 605 g Bendrieji mašinos duomenys Matmenys (ilgis × plotis × aukštis): 10 500 × 2 860 × 2 890 mm Svoris: 43 000 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, X ašies eiga: 1 500 mm, Y ašies eiga: 2 400 mm, Z ašies eigos atstumas: 6 000 mm, Krauss Maffei linijinis robotas Pagaminimo metai: 2014 X ašis: 1500 mm Kljdpfjyk S Ndox Amkot Y ašis: 2400 mm Z ašis: 6000 mm

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, veikimo valandos: 70 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 000 kN, varžto skersmuo: 90 mm, tarpas tarp stulpų: 1 000 mm, įpurškimo slėgis: 1 742 juosta, atvērimo eiga: 2 000 mm, TECHNINĖS DETALĖS Sandarumo jėga: 8 000 kN Maksimali įrankio atidarymo jėga: 356 kN Judančios atidarymo plokštės padavimo jėga: 98 kN Judančios uždarymo plokštės jėga: 92 kN Kljdpfxsxup Nno Amket Plokštės dydis (A x P): 1 610 mm x 1 530 mm Stulpelių tarpai (A x P): 1 120 mm x 1 000 mm Įrankio atidarymo eiga: 1 400 mm Minimali įrankio aukštis: 600 mm Didžiausias atidarymas: 2 000 mm Hidraulinio išstūmėjo eiga: 250 mm Sraigto diametras: 90 mm L/D santykis: 23 Įpurškimo slėgis: 1 742 bar Įpurškimo tūris: 2 863 cm³ Šūvio svoris (PS): 2 605 g MAŠINOS DETALĖS Išmatavimai ir svoris Išmatavimai (I x P x A): 10 500 x 2 860 x 2 890 mm Svoris: 43 000 kg Veikimo valandos: 70 000 h

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, veikimo valandos: 70 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 6 500 kN, varžto skersmuo: 100 mm, įpurškimo slėgis: 1 742 juosta, formos aukštis (min.): 600 mm, atvērimo eiga: 1 150 mm, plokštės plotis: 1 440 mm, plokštės aukštis: 1 490 mm, Injection moulding machine with Wittmann automation TECHNICAL DETAILS Clamping force: 6,500 kN Mold opening force: 346 kN Sliding platen opening force: 169 kN Sliding platen clamping force: 144 kN Mounting platen dimensions: 1,490 mm x 1,440 mm Clear tie bar spacing: 1,000 mm x 930 mm Mould opening stroke: 1,150 mm Minimum mould height: 600 mm Injection unit Screw diameter: 100 mm Injection pressure: 1,742 bar Injection volume: 2,411 cm³ Shot weight for PS: 2,170 g Injection rate: 649 cm³/s Wittmann W643 Robot X-axis servo: 1,200 mm Y-axis servo: 2,400 mm Z-axis servo: 6,000 mm C-axis servo: +/- 90° A-axis servo: +/- 180° Vacuum: 4 circuits Gripper: 4 circuits Electrical and hydraulic equipment Pump motor rated power: 90 kW Installed heater power: 44 kW Number of barrel heating zones: 7 Oil tank capacity: 1,240 l MACHINE DETAILS Net weight with control cabinet: 39.5 t Operating hours: 70,000 h Kodpowp Si Njfx Amkelt MAINTENANCE All hydraulic lines replaced 12/24 Last inspection Krauss Maffei 24.03. New (hydraulic) screw drive 25.01. New non-return valve 01/25 FEATURES - Fully hydraulic clamping system - MC 4 control system with colour monitor and integrated operator panel - Built-in floppy disk drive - Complete plasticising unit for thermoplastics with 100 mm screw diameter, check valve and open nozzle

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Krauss Maffei Injection Moulding Machine KM 250-1900 C1 Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: Fully hydraulic Control: MC4 with colour monitor, operator panel, and diskette station 🔹 Clamping Unit Clamping force: 2,500 kN Opening force: 160 kN Movable platen force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1,050 mm Kjdpfxjxak Uco Amkjlt Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Mould installation height: 330 mm Mould opening width: 1,150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1,778 bar Injection volume: 1,047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Output (PS): 75 g/s (standard), 105 g/s (increased speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Barrel heaters: 30 kW (6 zones) Dry cycles (according to Euromap): 1,400 1/h Oil tank capacity: 720 l 🔹 Dimensions and Weight Net weight (incl. control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Būklė: geras (naudotas), Gamybos metai: 1999, Krauss Maffei Injection Moulding Machine KM 420 - 2700 C1 • Year of manufacture: 1999 Technical Data Clamping Unit Kljdpfx Aswqd Aqomkst • Clamping force: 4200 kN • Max. mould opening force: 250 kN • Moving platen travel force (opening): 124 kN • Moving platen travel force (closing): 102 kN • Platen size (W x H): 1270 mm x 1200 mm • Tie bar distance (W x H): 800 mm x 800 mm • Mould opening stroke: 1020 mm • Minimum mould height: 380 mm • Maximum daylight: 1400 mm • Ejector force (forward / backward): 95 / 48 kN Injection Unit • Screw diameter: 80 mm • L/D ratio: 20 • Injection pressure: 1829 bar • Shot volume: 1433 cm³ • Shot weight (PS): 1304 g • Injection rate: 513 cm³/s • Maximum plasticising capacity: 108 g/s • Nozzle pressure: 173 kN Electrical and Hydraulic Installation • Pump motor power: 75 kW • Installed heating power: 36 kW • Number of heating zones (barrel): 7 • Oil tank capacity: 1075 l Dimensions and Weight • Machine dimensions (L x W x H): approx. 7.06 m x 2.33 m x 2.51 m • Total machine weight: 20,500 kg

Būklė: naujas, Gamybos metai: 2025, Injection Moulding Machine – Krauss Maffei KM 160-750 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer utilizing real-time Ethernet technology, equipped with an integrated 21.5" operator panel featuring a colour touch screen. Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 50 mm, with non-return valve and open nozzle. Nozzle radius: 10 mm Kodjxdd N Uepfx Amkjlt Nozzle bore: 4 mm Technical Data (standard version) Clamping Unit Clamping force: 1,600 kN Opening force: 86 kN Platen dimensions (H x V): 820 x 845 mm Tie bar spacing (H x V): 520 x 520 mm Opening stroke: 650 mm Minimum mould height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force forward/backward: 23 / 10 kN Injection Unit Screw diameter: 50 mm L/D ratio: 20.2 Injection pressure: 1,892 bar Injection volume: 393 cm³ Shot weight (PS): 357 g Injection speed: 90 mm/s Injection rate (standard): 177 cm³/s Screw speed (standard): 265 rpm Electro-hydraulic System Pump motor power: 22 kW Installed heating capacity: 15.5 kW Dry cycle time according to Euromap 6: 2.1 s Oil tank capacity: 400 L Linear Robot – Krauss-Maffei LRX 100 Payload < 10 kg (gripper + drives + parts) Part placement on operator-opposite side Axes: X axis (from mould): 620 mm, servomotor Y axis (vertical, with motor brake): 1,200 mm, servomotor Z axis (transverse): 1,500 mm, servomotor Dimensions and Weight Net weight (with control cabinet): 6.10 t Machine dimensions (L x W x H): 4.93 x 1.62 x 2.04 m

Būklė: naujas, Gamybos metai: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" operator panel with a color touchscreen. Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Kedpfx Asxdd Spemkolt Nozzle radius: 15 mm Nozzle opening: 6 mm Technical data (standard version) Clamping Unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1050 mm Tie-bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Ejector force (forward/backward): 58 / 28 kN Injection Unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2006 bar Shot volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Standard injection flow rate: 311 cm³/s Standard screw speed: 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heating capacity: 22.4 kW Dry cycle time (Euromap 6): 2.7 s Oil tank capacity: 720 dm³ Linear Robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part deposit on operator-opposite side Axes: X-axis (from mould): 900 mm, servo motor Y-axis (vertical, with motor brake): 750/750 mm, telescopic, servo motor Z-axis (cross): — Dimensions and Weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Būklė: naujas, Gamybos metai: 2025, Injection Molding Machine – Krauss Maffei KM 651-6100 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit pressure regulation. MC6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen. Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 95 mm, with non-return valve and open nozzle. Nozzle radius: 25 mm Nozzle bore: 9 mm Technical Data (Standard Version) Clamping Unit Clamping force: 6500 kN Opening force: 455 kN Platen dimensions (H x V): 1660 x 1530 mm Tie-bar spacing (H x V): 1200 x 1020 mm Kljdpfx Aoxdd U Djmkst Opening stroke: 1450 mm Mold height (min.–max.): 450 – 1000 mm Daylight: 1900 mm Ejector stroke: 300 mm Ejector force front/rear: 140 / 70 kN Injection Unit Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Injection volume: 3367 cm³ Shot weight (PS): 2391 g Injection speed: 110 mm/s Injection rate: 780 cm³/s Screw speed (standard): 147 rpm Plasticizing rate (at standard screw speed): 102 g/s Nozzle contact force: 166 kN Electro-Hydraulic System Pump motor power: 97 kW Installed heater power: 54 kW Number of heating zones (barrel): 7 Dry cycle time, Euromap 6: 3.3 s / 840 mm Dry cycle time, KM standard: 2.9 s / 600 mm Oil tank capacity: 1435 l Linear Robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Part depositing on operator-opposite side Axes: X-axis (from mold): 900 mm, servomotor Y-axis (vertical, telescopic, with brake): 1000/1000 mm, servomotor Z-axis (crosswise): 2500 mm, servomotor Dimensions and Weight Net weight (incl. control cabinet): 38.5 t Machine dimensions (L x W x H): 10.19 x 3.03 x 2.51 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Krauss Maffei KM 80-380 CX liejimo mašina Gamybos metai: 2010 Uždarymo blokas Uždarymo jėga: 800 kN Tvirtinimo plokščių matmenys (A × P): 670 × 670 mm Atstumas tarp kolonų (A × P): 420 × 420 mm Formos aukštis (min./maks.): 250 mm Didžiausias atidarymas: 750 mm Įpurškimo blokas Sraigto skersmuo: 40 mm Įpurškimo tūris: 201 cm³ Įpurškimo svoris (PS): 183 g Įpurškimo slėgis: 1860 bar Elektrohidraulinė įranga Siurblio variklio galia: 15 kW Ksdpfexw Upfjx Amkslt Šildytuvų galia: 10,9 kW Matmenys ir svoris Mašinos matmenys (ilgis × plotis × aukštis): 4,09 × 1,48 × 2,02 m Svoris (su valdymo spinta): 3,55 t

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Krauss Maffei KM 900 – 8100 GX Injection Moulding Machine Year of manufacture: 2015 General Description: Hydraulic-mechanical, two-platen clamping system with 4 pressure cushions on the fixed platen and 4 adjusting units on the moving platen. The machine is equipped with an injection unit control system of the PV (proportional valve) type. Control operates via a modern MC6 system, based on an industrial PC with real-time Ethernet technology. The operator panel is an integrated 19-inch touchscreen with colour display, LED backlight, and full process visualization using ProcessDesigner. Plasticising Unit: Complete system for thermoplastics processing Abrasion-resistant (wear-protected) version Screw diameter: 105 mm Check valve and open nozzle Technical Data: Clamping Unit: Clamping force: 9000 kN Mould opening force (pressure cushions): 630 kN Platen dimensions (W x H): 1660 x 1530 mm Tie bar spacing: 1180 x 1000 mm Max. mould opening stroke: 1600 mm Mould height (min – max): 500 – 1100 mm Max. total opening stroke: 2100 mm Ejector stroke: 300 mm Ejector force (forward / return): 140 / 70 kN Injection Unit: Screw diameter: 105 mm Kedpfewyxbgjx Amkslt L/D ratio: 23.0 Injection pressure: 1778 bar Injection volume: 4546 cm³ Shot weight (for PS): 3228 g Injection rate: 805 cm³/s Screw speed (standard): 150 rpm Nozzle contact force: 166 kN Electrical and Hydraulic Equipment: Pump motor power: 120 kW Heater power: 59 kW Number of heating zones (barrel): 7 Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm Dry cycle time / stroke (KM standard): 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and Weight: Net weight (incl. control cabinet): 40 tons Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine Year of manufacture: 2011 LRX 500 Robot Z-axis: 4000 mm X-axis: 1500 mm Y-axis: 1250/1250 mm Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - injection unit regulation. MC 5 control system with colour monitor, integrated operator panel, and USB data carrier. Plasticising unit: Complete plasticising unit for thermoplastics with a 135 mm screw diameter, non-return valve and open nozzle. Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit: - Clamping force: kN 8500 - Mold opening force: kN 560 Kledpfx Amswqdyijkjt - Platen dimensions (H x V): mm 1600 x 1600 - Tie bar clearance (H x V): mm 1140 x 1140 - Mold opening stroke: mm 1600 - Mold height (min–max): mm 500 - 1100 - Daylight: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200 / 100 Injection unit: - Screw diameter: mm 135 - Injection pressure: bar 1389 - Shot volume: cm³ 8588 - Shot weight for PS: g 6098 - Injection rate: cm³/s 1414 Electro-hydraulic equipment: - Rated pump motor power: kW 132 - Dry cycle time according to Euromap 6: 1/h 965 - Oil tank capacity: l 2440 Weights and dimensions: - Net weight with control cabinet: t 49 - Installation space (L x W x H): m 11.72 x 2.92 x 2.71

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, INJECTION MOLDING MACHINE KRAUSS MAFFEI KM 300-1900 C1 Year of manufacture: 2007 Included: Wittmann W 731 robot General Description We offer a used injection molding machine from the renowned manufacturer Krauss Maffei, model KM 300-1900 C1, equipped with a Wittmann W 731 robot. The machine features a fully hydraulic clamping system as well as a modern MC4 control unit with color monitor, integrated operator panel, and disk drive station. Plasticizing Unit Complete plasticizing system for thermoplastics, equipped with wear-resistant protection, screw diameter 60 mm with non-return valve and open nozzle. Technical Data Clamping Unit Clamping force: 3000 kN Mold opening force: 160 kN Moving platen force: – Opening: 86 kN – Closing: 68 kN Platen dimensions (H x W): 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mold opening stroke: 820 mm Minimum mold height: 330 mm Maximum daylight between platens: 1150 mm Ejector stroke: 200 mm Ejector force: 58 / 28 kN Injection Unit Screw diameter: 60 mm Kjdpfx Ajw Du Htemkelt Injection pressure: 2420 bar Injection volume: 769 cm³ Shot weight (PS): 700 g Screw speed (standard/option): 218 / 306 rpm Injection rate: 294 cm³/s Output at: – Standard speed: 55 g/s – Increased speed: 78 g/s Electrical-Hydraulic System Pump motor capacity: 55 kW Heater power: 30 kW Number of heating zones (cylinder): 6 Dry cycles (Euromap): 1350 cycles/h Oil tank capacity: 720 l Dimensions and Weight Net weight incl. control cabinet: 14.2 t Overall dimensions (L x W x H): 6.21 x 2.04 x 2.38 m