Hidralmac Portal-Richtpresse pirkti naudotą (1 456)

Būklė: visiškai atnaujintas (naudotas), PORTALFRÄSMASCHINE TOS Bjdpfefmn Txox Ab Rjwp LÄNGE 3000mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 000 mm, Y ašies eiga: 2 200 mm, Z ašies eigos atstumas: 1 100 mm, X ašies padavimo greitis: 50 m/min, Y ašies padavimo greitis: 50 m/min, padavimo greitis Z ašis: 50 m/min, stalo ilgis: 4 000 mm, stalo plotis: 2 000 mm, veleno greitis (maks.): 22 000 aps./min, sukimo momentas: 128 Nm, veleno nosis: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA X-axis travel (longitudinal): 4,000 mm Y-axis travel (transversal): 2,200 mm Z-axis travel (vertical): 1,100 mm Maximum speed with interpolating axes: 50 m/min WORK TABLE Dimensions: 4,000 x 2,000 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling elements. Direction of the T-slots runs parallel to X-axis movement. AXIS SPECIFICATIONS: Axis feedrate: 50,000 mm/min Acceleration: 4 m/sec² Bwedszb Evlopfx Ab Rop WORKING FIELD Maximum horizontal passage: 3,200 mm Maximum vertical clearance under bridge: 1,926 mm Table height from floor: 330 mm UNIVERSAL HEAD WITH CONTINUOUS POSITIONING FOR ELECTROSPINDLE Automatic universal head, indexable to 360,000 positions (every 0.001°). The rotational movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercutting. Built-in cooling system for bearings and head drive motors. B-axis rotation range: +/-185° A-axis rotation range: +/-185° Maximum axis rotation speed: 30 rpm Maximum available torque during operation on A/C axes: 450 Nm Axis clamping torque: 1,400 Nm Spindle power available (S1/S6): 22/33 kW Spindle torque available (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Tool holder: HSK-A63 DIN 69893 The head is supplied complete with cradle for handling and storage. The use of the cradle occurs outside the effective working area, so the machine's real capacity is not reduced. 30-POSITION HSK CHAIN TOOL MAGAZINE: Automatic 30-position chain tool changer located at the rear of the work area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter with adjacent positions occupied: 90 mm Max tool length: 300 mm Max tool weight: 10 kg SCALE PRESSURIZATION: Complete pneumatic system with control unit for the pressurization of linear encoders. SPRAY-MIST TOOL COOLANT: Mist coolant lubrication system. The mist is generated by mixing air and oil. Activation is controlled via M-function. Using spray-mist improves cut quality, prevents material buildup, keeps the cutting area clean, and provides cooling. Very useful for improving surface finish quality. EXTERNAL TOOL COOLING: System for distributing coolant managed by CNC with nozzles arranged around the spindle flange, includes a tank (1,200 liters) for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum required current: 235 A Machine equipped with: • Remote electronic handwheel Heidenhain HR550 • Various tooling included with the machine • Renishaw probe • BLUM laser presetting • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • No. 2 chip conveyors mounted on both sides of the work table • Operating and maintenance manual, and CE conformity declaration

Būklė: naudotas, Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 17 000 mm, Y ašies eiga: 4 800 mm, Z ašies eigos atstumas: 1 500 mm, stalo ilgis: 16 000 mm, stalo plotis: 3 000 mm, veleno greitis (maks.): 3 000 aps./min, greitas poslinkis X ašimi: 12 m/min, greitas poslinkis Y ašis: 8 m/min, greitasis eiga Z ašyje: 8 m/min, atstumas tarp stulpų: 3 800 mm, įvesties srovės tipas: trifazis, frezos galvos padėtis: vertikal / Winkelkopf, sukimosi greitis (maks.): 3 000 aps./min, atstumas nuo stalo iki veleno centro: 2 300 mm, bendras svoris: 90 000 kg, veleno nosis: ISO 60 / ISO 50 Adapter, ašies variklio galia: 60 000 W, Įranga: sūkių greitis be galo kintamas, ➡️ WALDRICH COBURG CNC GANTRY MILLING MACHINE ⬅️ Heavy-Duty Machining | Siemens 840D Retrofit | Ready for Production For sale is a high-quality CNC gantry milling machine from the premium manufacturer Waldrich Coburg, in excellent condition. ✔ Machine under power ✔ Inspection and test run possible ✔ Siemens 840D retrofit (2013) ✔ New electrical system & control cabinets ✔ New motors & drives ✔ Heidenhain glass scales on all axes ✔ Ideal for large component machining & heavy-duty cutting Technical Specifications Travel X-axis: 17,000 mm Travel Y-axis: 4,800 mm Travel Z-axis: 1,500 mm Clamping area / floor plates: 16,000 x 3,000 mm Column clearance: 3,800 mm Distance table to milling spindle: 2,300 mm Spindle power: 60 kW Speed range: 0.4 – 3,000 rpm Bwjdpfx Aboy Rrb Is Rop Tool holder: ISO 60 / ISO 50 adapter Machine weight: approx. 90,000 kg Equipment Siemens 840D CNC control 2-speed gearbox WFU 250 angle head with automatic indexing WFU 500 angle head with automatic indexing High-speed tapping Tool cart with tool holders Steel covers on X/Y axes 2 chip conveyors Ideally suited for: Mechanical engineering Large component machining Power plant construction Shipbuilding Steel and rolling mill industry Contract manufacturing 📍 Location: USA 🌍 Worldwide shipping can be arranged 📞 Further information, videos or inspection appointments available on request.

Būklė: naujas, These are the original 125ml grease cartridges for LGB machines, which must be replaced regularly to ensure precise lubrication. Bodpfxsv Ak Sdo Ab Rewp The price refers to one piece. For other spare parts for LGB or L.G.B. SCOP, please feel free to contact me as I am an authorized distributor.

Būklė: naudotas, Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 000 mm, Y ašies eiga: 2 700 mm, Z ašies eigos atstumas: 1 200 mm, bendras ilgis: 13 700 mm, bendras plotis: 10 000 mm, bendras aukštis: 5 300 mm, KEKEISEN PFW-T 4000/12 gantry milling machine in heavy, rigid design for machining large and heavy workpieces. Travel ranges of 4,000 x 2,700 x 1,200 mm and a large worktable measuring approx. 4,000 x 1,800 mm with a table load capacity of 10,000 kg allow for the machining of large-volume components. The machine is equipped with a universal milling head featuring 2 swivel axes and 5 adjustable positions (manual or optionally NC-controlled). Hirth coupling ensures precise angle settings. Bwsdey Ncgfspfx Ab Rop Powerful main spindle drive with approx. 30 kW (up to 37 kW in some cases), speed range from 20 – 2,000 rpm, optionally up to 4,000 / 7,000 rpm and a maximum torque of approx. 1,787 Nm – ideal for heavy-duty machining. Further features include a 60-position tool changer (KWE60), chip conveyor, KNOLL filtration system, Hydac cooling units, as well as central lubrication. Feed rate up to 4 m/min, rapid traverse up to 18 m/min, and feed forces of approx. 30,000 N per axis highlight the machine’s robust design.

Būklė: naujas, Gamybos metai: 2025, X ašies eiga: 6 000 mm, Y ašies eiga: 4 000 mm, Z ašies eigos atstumas: 1 500 mm, (Distance between machine columns 3,520 mm) Z = 1,500 mm Heidenhain control Bwedpfxjqrq Eme Ab Rep Water-cooled inline motor 43 kW / 900 Nm Automatically indexing milling head 6,000 rpm / 2 axes, 90°|45° / 0.001° x 0.001° 3-sided safety enclosure Handheld electronic wheel 2 x chip conveyors 60-position tool changer

Būklė: naudotas, Linear unit, linear axis, gantry axis with servo drive, synchronous servomotor, electric carriage, Bodpfegf Ix Aex Ab Rewp loading unit, linear guide with servomotor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO Type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel distance: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball guide size 20 Payload: 60 kg Maximum ball screw speed: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Maximum current consumption: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper tongs open pneumatically - Unit is mounted on welded square tube frame Total weight approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit under stock number 59702

Būklė: naudotas, Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, Siūlome šią naudotą HAAS GR-510 portalinę frezavimo staklę, pagamintą 2015 metais. Staklių komplektacija: Įrankių keitikliai: - 20 vietų karuselinio tipo įrankių keitiklis Bwjdpfxsyxx Azo Ab Rop 4-a | 5-a ašis: - 4-osios ašies pavara ir instaliacija Matavimo sistema: - Belaidė intuityvi matavimo sistema Drožlių ir aušinimo valdymas: - Drožlių ir aušinimo skysčio apsauga - Portalinių staklių aušinimo sistema - Programuojamas aušinimo antgalis Haas valdiklis: - Ankstyvo elektros tiekimo nutrūkimo aptikimo modulis - Standus sriegimas Papildomi pasirinkimai: - 6 colių pailgintas Z ašies tarpas - Plieninis stalas, matrinė konfigūracija Paveldo pasirinkimai: - CT tipo įrankių keitiklio griebtuvai - 10 000 aps./min. velenas, 15 AG - Nuotolinis valdymo pultelis su spalvotu LCD ekranu

Būklė: naujas, Portal Machine – The Space Miracle! CNC Gantry Milling Machine for large travel distances with minimal space requirements! ADVANTAGES: • Optimal space utilization, completely unobstructed clamping surface • Maximum chip protection thanks to overhead axes • Particularly suitable for tall and bulky components FEATURES: - Gantry function on Y-axis (synchronized via ProNC software) - CAN bus system with EC servo motors on all axes - Backlash-free adjusted steel ball screws with steel linear guides - T-slot table for easy clamping of workpieces and accessories - Clamping surface from 1100x1000 to 1750x2000 mm - Variable pass-through from 340 mm to 590 mm - Spindle motors: iSA 500 / 750 / 1500 / 1500L as well as iSA 900 / 1500W / 1500WL / 2200 - Speed: up to 250 mm/sec possible - PILZ safety technology - Effortless operation via height-adjustable CNC panel - Network-capable control PC with Windows - Parallel sliding door - Clamping of workpieces via T-slot plate - Variable gantry clearance, tailored to customer requirements CONSTRUCTION: Gantry: movable, Table: stationary FIELDS OF APPLICATION: • Machining • Measuring and testing • Dispensing applications FOR PROCESSING: • Aluminum / light metals • Machining plastics • Ceramics • Non-ferrous metals (brass, bronze, etc.) • Plastics • Wood Optimal space utilization with minimal footprint. Do you have limited space but still require maximum travel? We have the solution for you. Our Overhead machine series offer maximum travel distances with a compact footprint. All drives are located in the upper area of the machine, leaving the entire machine table free for your individual applications. Thanks to a wide range of variable features and additional options, the CNC machine can be optimally configured for many industries and fields. Application possibilities for the OverHead Gantry M include not only machining but also measuring, testing, and dispensing applications. With a milling motor power of up to 2.2 kW and 20,000 rpm as well as travel speeds up to 250 mm/sec, it is suitable for machining wood and plastics as well as light and non-ferrous metals. The open working area and excellent price/performance ratio offer key advantages over comparable products. The OverHead Gantry M is available in five different sizes for various travel ranges from M20 to M50. Need the control cabinet on the right or prefer the operator unit on the left? No problem – we are happy to accommodate your preferences and, of course, take care of maintenance and support for your OverHead Gantry M. Bodpfjhqhlvex Ab Rjwp Our service technicians are available by phone and can quickly be on site if required. Additionally, we offer our in-house software isy-CAM 2.8 and provide consultation for your specific application. Many options available on request!

Būklė: geras (naudotas), Gamybos metai: 2008, Urban PF 3000 / Gantry-Type Machining Center, Year of manufacture: 2008, Control: Heidenhain iTNC 530, Travel (X/Y/Z): 3210/695/585 mm, Gantry-type machining center, Drilling capacity in ST 60: Ø 18 mm, Tapping capacity: M16, Spindle speed up to 8,000 rpm, SK 40, 12-position tool changer, Table size: 3,000 x 700 mm, Chip tray, Bsdpfx Abou Tptco Rswp Coolant system, Electronic handwheel, Tool length measurement device,

Būklė: naudotas, Gamybos metai: 2004, X eiga 3000 mm Y eiga 3400 mm Z eiga 950 mm Tvirtinimo paviršius 2500x1600 mm Stalų skaičius 2 Valdymas NUM Įrankių keitiklis 12 pozicijų Apsisukimai 4,5-40 000 aps./min Veleno tvirtinimas: HSK 40 Veleno variklis 6 kW Stalo apkrova 850 kg HF velenas 100 A 45 Techniniai duomenys yra gamintojo arba operatoriaus informacija ir nėra įpareigojantys. Galimas išankstinis pardavimas; taikomos tik mūsų pardavimo sąlygos. Apie mus Daugiau nei 400 nuosavų įrenginių sandėlyje Daugiau nei 15 000 m² sandėliavimo ploto, 70 t krano keliamoji galia Daugiau nei 10 000 prekių ir priedų jūsų dirbtuvėms Jei domina mašinų, gamybos linijų arba verslo pardavimas, susisiekite su mumis. Daugiau pasiūlymų rasite mūsų interneto svetainėje. Apžiūra galima iš anksto susitarus. Laukiame jūsų apsilankymo. Bedpfx Abeyqv Eio Rswp Jūsų Markus Hirsch komanda

Gamybos metai: 1987, būklė: naudotas, mašinos/transporto priemonės numeris: 7.0176, Note: We have 6 units of this machine in stock! Manufacturer: Gildemeister Model: GS 36 – 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11 t General / technical data: Portal 6-spindle automatic lathe Spindle pitch circle: 300 mm Number of longitudinal slides: 6 Number of cross slides: 2 Max. cross slide travel: 60 mm Max. longitudinal slide travel: 125 mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Infinitely variable 1.95 – 78 seconds Secondary time range: 0.79 – 2.13 seconds Drive power: DC spindle motor 20 kW; feeds 8 kW Installation area: approx. 1720 x 4700 mm Note: The machine cannot be converted for bar work. Bjdpfx Ajin Ub Tjb Rowp Equipment: – 1 creep speed drive for setup operation – 1 automatic central lubrication system – 1 coolant system with piping and pump – 1 facing slide, position 3 (without cams) – 1 facing slide, position 5 – 6 longitudinal slides (without drive, without cams) – Feed for independent longitudinal slide, flexible, position 1–6 – Programmable logic controller IPC 620 – Noise protection measures 80db – Automatic feed re-engagement with electrical interlock for side door – Hinge belt chip conveyor – Machines equipped with DC drives for spindle speed and feed – KIENZLE terminal 2450-07 with signal interface and data transmission control Accessories: Electrical configuration: The electrical equipment consists of a direct current main drive with 20 kW output for the spindle and a three-phase servomotor for the feed drive with an output of 8 kW (protection class IP 54), as well as the appropriate switching and control devices and all required installation. Total connected load of the machine: 32 kW/h.

Būklė: naudotas, Linear unit, linear axis, gantry axis with servo drive, synchronous servomotor, electric slide, loading unit, linear guide with servomotor and pneumatic gripper REXROTH INDRAMAT Type: MKD0771B-061-KP1-KN Identification No.: 247238 0001 Year of manufacture: 2000 Axis travel: 2400 mm Carriage length: approx. 500 mm Total length: 3520 mm - Pneumatic feed clamp (clamping tongs with 2 Festo pneumatic cylinders) - Standard linear guide 65 x 25 mm - Base profile made of steel - Recirculating ball screw Ø 32 x 10 mm - Pneumatic system with position indicator - Permanent magnet servomotor Type: MKD071B-061-KP1-KN (Part No.: 261989, Serial No.: MKD071-50234, brake with 24 Volt DC) Overall dimensions (L x W x H): 3520 x 400 x 580 mm Weight: 340 kg Bjdpfxjgi E Haj Ab Rjwp Good condition Possible drive controllers available under stock no. 53628 and stock no. 53673

Būklė: naudotas, Table unit from a DROOP & REIN gantry milling machine Bwsdpfsthuzpex Ab Rep Clamping plate with T-slots made of steel/cast iron Table unit with clamping plate and very massive guideway Table clamping area: 5500 x 2000 mm Travel of the table clamping plate: approx. 3100 mm Table height (overall height): 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single start) - Machining table guided very stably on the bed - Metal telescopic guideway cover - Originates from a DROOP & REIN gantry milling machine - Table longitudinal movement via ball screw and SIEMENS servo motor - Clamping surface with 11 pcs. T-slots, 28 mm - Drive via SIEMENS Servomotor 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Total length: 9500 mm Width: 2000 mm Overall height: 1050 mm Net weight: 28 tons Good condition

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, veikimo valandos: 4 486 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 2 360 mm, Z ašies eigos atstumas: 1 500 mm, sukimosi greitis (maks.): 18 000 aps./min, valdiklio modelis: Fidia C20 mit Bedienteil HPX, Staklus yra visiškai veikianti, labai geros būklės. Ji yra išardyta, sandėliuojama ir prieinama iš karto! TECHNINĖS DETALĖS X ašies eiga: 3 000 mm Y ašies eiga: 2 360 mm Z ašies eiga: 1 500 mm A ašies sukinio kampas: 105° C ašies sukinio kampas: 300° Tvirtinimo paviršiaus plotas: 5 000 mm x 2 000 mm Bedpfsywgyrox Ab Rowp Stalviršio apkrova: 15 000 kg/m² T griovelių atstumas: 18H12 / 250 mm Padavimo greitis X, Y, Z ašys: 20 m/min Ašių pagreitis X, Y, Z: 1,5 m/s² Maks. pagrindinio veleno sūkių skaičius: 18 000 aps./min. Sukimo momentas: 90 Nm Įrankio tvirtinimas: HSK 63A STAKLĖS DETALĖS Veleno galia: 28 kW Bendras prijungiamasis pajėgumas: 40 kW Apsauginis išankstinis saugiklis: 80 A Veleno darbo valandos: 4 486 h Staklių darbo valandos: 146 161 h Matmenys ir svoris Staklių su periferija užimamas plotas (Ilgis x Plotis x Aukštis): 7 300 x 5 600 x 5 600 mm Staklių svoris: 16 500 kg ĮRANGA 3 pusių aptvaras, be ištraukimo kanalų.

Būklė: naudotas, Linijinis kreiptuvas, portalo ašis SCHNEIDER ELECTRIC / FESTO Elektros stumoklis Variklio tipas: ILS1B571PC1A0 Bwodpfx Aew Uc Tzsb Rsp Pagaminimo metai: 2010 Ašies eiga: 300 mm Maitinimo įtampa: 36 V (DC) Vežimėlis: 86 x 54 mm - Sinchroninis servovariklis / žingsninis variklis SCHNEIDER ELECTRIC, tipas: ILS1B571PC1A0 - Linijinis kreiptuvas FESTO, tipas EGSK-33-300-6P - Rutulinis sraigtas Ø 10 mm, žingsnis 6 mm - 2 reguliuojami padėties jutikliai Matmenys I x P x A: 580 x 120 x 57 mm Svoris: 6,5 kg geros būklės

Būklė: nepatikrintas (naudotas), Gamybos metai: 1998, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 0112, X ašies eiga: 1 500 mm, Y ašies eiga: 3 500 mm, Z ašies eigos atstumas: 1 000 mm, veleno greitis (maks.): 9 000 aps./min, Įranga: dokumentacija / vadovas, Nėra minimalios kainos – garantuotas pardavimas už didžiausią pasiūlytą kainą! Pakrovimas galimas 2025-09-08 arba 2025-09-09! TECHNINIAI DUOMENYS Poslinkio atstumai X ašis: 1 500 mm Y ašis: 3 500 mm Z ašis: 1 000 mm Stalo matmenys: 4 500 x 1 600 mm Bedow Hrh Hjpfx Ab Rowp Velenas ir įrankiai Maks. veleno greitis: 9 000 aps./min Kampo galvos pasukimo diapazonas (B ašis): ±90° Įrankių tvirtinimas: SK 40 ĮRANGOS DUOMENYS Matmenys ir svoris Matmenys (I x P x A): 8 000 x 5 000 x 3 700 mm Svoris: 32 000 kg KOMPLEKTACIJA 2 ALMATIC gamintojo mašininiai spaustuvai Įvairūs tvirtinimo elementai mašinai Techninė dokumentacija

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 5 498 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 500 mm, Y ašies eiga: 1 300 mm, Z ašies eigos atstumas: 3 500 mm, X ašies padavimo greitis: 40 m/min, Y ašies padavimo greitis: 40 m/min, padavimo greitis Z ašis: 40 m/min, stalo ilgis: 2 500 mm, stalo plotis: 3 500 mm, veleno greitis (maks.): 12 000 aps./min, stalo aukštis: 300 mm, stalo apkrova: 130 000 kg, ruošinio svoris (maks.): 130 000 kg, veleno nosis: HSK A100, JUDANTIJO TILTINĖ FREZAVIMO STAKLĖS FPT MOD. DINOX 350 IAT 5 ašių Skaitmeninis valdymas Heidenhain TNC 640 X ašis: 2 500 mm Z ašis (vertikali): 1 300 mm Y ašis: 3 500 mm Greitasis judesys: 40 000 mm/min Bodpfx Ajwzv Tcjb Rjwp Nuolat reguliuojama universali galva Elektroverpstės jungtis: HSK A100 Maks. apsukos: 12 000 aps./min A ašis: ±185° C ašis: ±270° Stalas: 3 500 x 2 500 mm, aukštis 300 mm Keliamoji galia: 15 t/m² Įrankių keitimo vietų skaičius: 64 Bendra galia: 85,13 kW Svoris: 51 370 kg Komplekte: - Lazerinė zonda ir integruota įrankio vientisumo bei ilgio ir spindulio matavimo programinė įranga - Detalės matavimo ir išlyginimo zonda - Išorinis/vidinis įrankio aušinimas, rezervuaras 1 500 l, slėgis 40 bar - Detalės plovimo pistoletas su įrankio aušinimu, atskira pompa - Vidinis įrankio aušinimas suspaustu oru, didelės spartos - Skiedrų transporterio sistema NAUDOTA MAŠINA Metai – 2018

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 500 mm, Y ašies eiga: 2 500 mm, Z ašies eigos atstumas: 1 300 mm, STALO MATMENYS 3500 X 2500 MM VERPTUVINIO KŪGIS HSK 100 Bwodpfxsy R Slae Ab Rep ĮRANKIŲ KEITIKLIS 64 VIETŲ CNC HEIDENHAIN TNC 640

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 1988, For sale: a high-performance 4-axis CNC gantry milling machine WALDRICH COBURG, Type 17 – 10 FP, ideally suited for machining large and heavy workpieces. Bodpfx Aedu Hg Hsb Rswp The machine stands out with its robust construction, powerful performance, and extensive equipment package. It also offers excellent potential for modernization or CNC retrofit according to customer requirements. ⚠️ Important Notice This machine is offered without electrical equipment and CNC control, making it ideal as a retrofit project. ⚙️ Highlights: ✅ 4-axis CNC gantry milling machine with adjustable crossbeam ✅ Powerful main drive (75 kW) ✅ Speed range up to 2,000 rpm with high torque ✅ Automatic pallet changer (3 pallets) ✅ Hydrostatic guides on X & Y axes ✅ Through-spindle internal coolant ✅ Ideal for heavy-duty machining & large components 📊 Technical data: 🔹 Column distance: 3,100 mm 🔹 Pallet clamping area: 2,750 x 4,000 mm (extendable) 🔹 Number of pallets: 3 (automatic) 🔹 Max. workpiece weight per pallet: 40 t 🔹 X-axis travel: 5,000 mm 🔹 Y-axis travel: 5,440 mm 🔹 Z-axis travel: 1,000 mm 🔹 W-axis (crossbeam) travel: 2,500 mm 🔹 Spindle power: 75 kW 🧰 Equipment: ✔️ Automatic pallet changer (3 stations) ✔️ Angular heads (RAA), incl. ISO 60 & ISO 50 ✔️ Special angular head ✔️ Spindle extension (650 mm) ✔️ Automatic head change system 📍 Location: Germany 👁️ Inspection possible at any time by appointment 📦 Available at short notice 📩 Contact us now for more information, photos, or a custom quote!

Būklė: geras (naudotas), Gamybos metai: 1982, mašinos/transporto priemonės numeris: 11.239, For sale is a heavy-duty, high-performance WALDRICH SIEGEN portal milling machine, type V/H-FR, ideally suited for machining large and heavy workpieces. The machine comes from a renowned German manufacturer and impresses with its extremely robust design, high precision in its basic structure, and outstanding suitability for modernization projects. Bwjdpfjdkmihex Ab Rop 💡 Key Feature: The machine is being sold as-is, not overhauled, providing the perfect opportunity for customer-specific modernization (e.g., new CNC control, electrics, measuring systems)—ideal for buyers looking to implement their own solutions. ⚙️ Highlights: ✅ Gantry design with fixed crossbeam for maximum stability ✅ High performance: 58 kW main drive ✅ Speed range up to 1,800 rpm ✅ Two machine tables with automatic coupling ✅ Very high load capacity: up to 100 tons ✅ Ideal for retrofit / CNC upgrades ✅ Perfectly suited for heavy-duty machining 📊 Technical Data: 🔹 Clamping area per table: 2,500 x 4,000 mm 🔹 Clamping area when coupled: 2,500 x 8,700 mm 🔹 Max. workpiece weight: ➡️ per table: 50 tons ➡️ when coupled: 100 tons 🔹 X-axis travel: up to 9,503 mm 🔹 Y-axis travel: 5,515 mm 🔹 Z-axis travel (ram): 1,000 mm 🔹 Spindle power: 58 kW 🧰 Equipment: ✔️ Tool changer (chain magazine, 60 positions) ✔️ Angle heads (RAA), incl. universal angle head ✔️ Spindle extension ✔️ Chip conveyor ✔️ Automatic accessory change system 📍 Location: Germany 👁️ Inspection possible at any time by appointment 📦 Available at short notice 📩 Contact us now for further information, pictures, or a customized offer!

Būklė: labai geros būklės (naudotas), rida: 138 779 km, galia: 350 kW (475,87 AG), pirmoji registracija: 07/2022, kuro tipas: dyzelinas, padangos dydis: 385/65 R 22.5, ašių konfigūracija: 4x2, kuras: dyzelinas, kuro bako talpa: 390 l, stabdžiai: retarderis, spalva: mėlyna, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: plienas-oras, leistina ašies apkrova (ašis 1): 8 000 kg, leistina ašies apkrova (ašis 2): 11 500 kg, Gamybos metai: 2022, Įranga: ABS, AdBlue, EBS (Elektroninė stabdžių sistema), autonominis šildytuvas, borto kompiuteris, centrinis užraktas, diferencialo užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, elektroninė stabilumo programa (ESP), kalno įkalnės asistentas, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, oro pagalvė, priekabos jungtis, priešrūkiniai žibintai, retarderis, suodžių filtras, trauki kontrolė, vairo stiprintuvas,

Būklė: naudotas, Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Angular milling head - Manufacturer: Waldrich Siegen - Model: ET500 Bjdpfx Ajrfw R Heb Rowp - Ref. No.: 11290/731

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: nepatikrintas, X ašies eiga: 6 000 mm, Y ašies eiga: 3 200 mm, Z ašies eigos atstumas: 2 050 mm, bendras ilgis: 13 000 mm, stalo ilgis: 5 000 mm, stalo plotis: 3 000 mm, bendras plotis: 8 000 mm, veleno greitis (min.): 12 000 aps./min, bendras aukštis: 6 000 mm, stalo apkrova: 50 000 kg, bendras svoris: 120 000 kg, įrankių magazino lizdų skaičius: 32, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, HEYLIGENSTAEDT HEYMUNILL 3200-P sunki portalo konstrukcija su fiksuotu skersiniu balkiu, skirta didelių ir sunkių ruošinių apdirbimui. Didelė darbinė zona su poslinkiais X 6 000 mm / Y 5 000 mm / Z 1 500 mm, stalas maždaug 5 000 x 3 000 mm, stalo apkrova apie 50 000 kg. Portalo praėjimas apie 3 220 mm plotis / 2 050 mm aukštis. Bodpfx Absy Anrte Rewp 5 ašių apdirbimas / frezavimo galvos A ir B ašys (šoninės ašys frezavimo galvoje) C ašis (360° sukimasis) Galima 5 ašių sinchroninė apdirbimas (su šakine galva) Frezavimo galvos: Tiesi frezavimo galva FK 120/340 90° kampinė galva WFK 100/750M Šakinė galva FK 100/2D Frezavimo galvų magazinas: 5 pozicijos automatinis frezavimo galvų keitimas Papildoma komplektacija: Vidinis aušinimas apie 7 bar 32 pozicijų įrankių keitiklis (SK50, Fibro ATC 32/50) Įrankių laikiklis SK50 (DIN 69871) Įrankio ilgio matavimo sistema (lazerinė) Drožlių transporterio sistema Aušinimo sistema Adaptinis padavimo reguliavimas Heidenhain ilgio matavimo sistemos X/Y/Z kryptimis.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 500 mm, Y ašies eiga: 1 750 mm, Z ašies eigos atstumas: 1 000 mm, valdiklio modelis: Siemens NCU 840 W Serie 2, ašių skaičius: 5, TECHNICAL DETAILS X-axis travel: 2,500 mm Y-axis travel: 1,750 mm Z-axis travel: 1,000 mm A-axis: 20 arcseconds C-axis: 30 arcseconds Rapid traverse X-axis: 17 m/min Rapid traverse Y-axis: 17 m/min Bedpjyz Abtofx Ab Rswp Rapid traverse Z-axis: 10 m/min Rapid traverse A-axis: 9 rpm Rapid traverse C-axis: 80 rpm Infinitely variable feed X- and Y-axis: up to 15,000 mm/min Z-axis feed: up to 4,000 mm/min Table plate: St 52-3 Table dimensions (L x W): 3,631 x 1,200 mm Milling head: FK 115 - SK40 Spindle speed: 14–1,000 rpm Bearing: A9 LC8 CNC A-axis: spindle swivel axis A-axis Swivel angle: ±120 degrees Torque: 450 Nm Speed: 8 rpm Resolution: 20 arcseconds Clamping: Hydraulic C-axis Rotation angle: 365 degrees Torque: 580 Nm Speed: max. 8 rpm Resolution: 30 arcseconds Clamping: Hydraulic MACHINE DETAILS Control: Siemens NCU 840 W Series 2 CNC-controlled axes: 5 Voltage: 400 V 50 Hz Power: approx. 35 kW Weight: 18,500 kg EQUIPMENT Swarf conveyor Sliding door Side window Stationary tool changer at the center of the machine/crossbeam rear Disc magazine with 16 SK40 positions Heidenhain length measuring system Note: The seller can arrange for an external service provider to handle the removal of the machine.