Cronosstech Chp 300 pirkti naudotą (14 743)

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 130 t, stalo plotis: 750 mm, stalo ilgis: 1 000 mm, perforavimo jėga: 130 t, pramušama skylė stalo paviršiuje: 220 mm, cilindro skersmuo: 55 mm, eigos reguliavimas: 140 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press operated by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. Lrodpfx Afjvtyvgs Hor CRONOSSTECH C-Type Eccentric Press 125 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for series production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement thanks to centralized automatic lubrication - Ready-to-use production with PLC control + dual hand/foot control Application Areas - Cold cutting and punching operations - Cold-breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel welded body • Four-sided guided slideway • Spheroidal graphite cast connecting rod and gear housing • Crankshaft and transfer shafts from 4140 tempered steel • Centralized fully automatic grease lubrication • Pneumatic clutch and brake combination • CE safety directives compliant • Dual coil safety valve • Manually adjustable stroke • Light curtain hand-finger protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor function • In compliance with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare table • Decoiler, feeder, and straightener • One set of die per requested specification • Eight-point slide guidance ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 Tons Throat depth: 310 mm Table–slide distance: 500 mm Slide–table gap: 510 mm Distance between uprights: 450 mm Ram adjustment (shut height adj.): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchor dimension: 790 mm Side anchor dimension: 1250 mm Table bore diameter: Ø210 mm Table size: 630×820 mm Die clamping hole diameter: Ø55 mm Ram size: 500×250 mm Floor to table height: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 SPM Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: If you require changes to the technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE This machine is produced by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, galia: 11 kW (14,96 AG), pjovimo aukštis (maks.): 1 500 mm, pjovimo plotis (maks.): 2 500 mm, garantijos trukmė: 12 mėnesiai, STANDARD FEATURES - Double independent hydraulic vises - Linear rapid descent system - Variable blade speed control - Variable head descent speed control - Hydraulic blade tensioning system - Table feed system - Safety switches - Chip conveyor - Motorized chip brush - 1 pcs band saw blade - 24 months mechanical / 12 months electrical warranty - Country of origin: Turkey TECHNICAL SPECIFICATIONS ROUND CAPACITY (MM): 1500 SQUARE CAPACITY (MM): 1500x1500 RECTANGULAR CAPACITY (MM): 1500x2500 BLADE SIZE (MM): 80x1.6x15650 BLADE SPEED (M/MIN): 20 – 80 MAIN MOTOR (KW): 11 HYDRAULIC MOTOR (KW): 2.2 COOLANT PUMP (KW): 0.09 VOLTAGE (V): 380 FREQUENCY (HZ): 50 WORKING HEIGHT (MM): 600 MACHINE DIMENSIONS (MM): 7500x2150x3440 WEIGHT (KG): 21000 WE MANUFACTURE ANGLE AND STRAIGHT CUTTING MODELS FROM 220MM TO 3000MM. Lrodpfjvvcpzox Af Hjr FOR MORE INFORMATION PLEASE CONTACT US.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 800 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, atitraukimo jėga: 270 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 800/270 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways Lrsdpfx Aox N Uh Usf Hjr General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed based on the double-acting (ram + blankholder) working principle for high-tonnage sheet metal forming, deep drawing, and spinning applications. The 8-slide H-frame structure provides high rigidity, stable parallelism, and an extended die life even with large table dimensions during the pressing process. The CHSP 800/270 model, featuring 800 tons main ram and 270 tons blankholder capacity, has been developed for processes requiring controlled material flow, especially in automotive, white goods, defense industries, and heavy sheet metal forming applications. The vibration stress-relieved steel construction frame ensures long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, 8-slide H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 slide bushings • WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram and blankholder stroke control • Adjustable ram and blankholder tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter contamination warning • Monitoring of hydraulic unit oil temperature and system status via display • Off-line filtration and cooling system • SIEMENS – SCHNEIDER electrical switch gear • Safety systems for operator protection 📐 Technical Specifications – CHSP 800/270 Type: Steel construction, 8-slide H-frame press body Frame Material: St52 – ERDEMİR Slide Bushing: Bronze Zr14 Capacity (Ram): 800 Tons Capacity (Blankholder): 270 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Blankholder): 350 mm Min. / Max. Daylight: 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø390 mm – Ck45 (2 units) Blankholder Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC: DELTA Touchscreen Panel: DELTA 7” Approximate Weight: 54 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 2 500 t, eigos ilgis: 1 000 mm, stalo plotis: 1 800 mm, stalo ilgis: 2 600 mm, atitraukimo jėga: 800 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 2500/800 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Slideways Lredpfjx N Uk Aex Af Hor General Description The CRONOSSTECH CHSP series H-type hydraulic forming presses have been developed for heavy-duty deep drawing applications that require very high tonnage, large table sizes, and precise blank holder force. The 8-guided H-frame body structure ensures high rigidity throughout the pressing process, maintaining parallelism and perpendicularity tolerances over long strokes. The CHSP 2500/800 model offers maximum stability, controlled material flow, and repeatable production performance for large and deep drawing dies, with a 2500-ton main ram and an 800-ton blank holder capacity. The stress-relieved steel construction body (vibration treated) is designed for robust and reliable long-term use in heavy industry environments. ⚙️ Standard Equipment • Steel construction, H-frame body type with 8 slideways • Vibration stress-relieved frame construction • Bronze Zr14 slideway bearings • WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen control panel • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear components • Heavy-duty industrial safety systems 📐 Technical Specifications – CHSP 2500/800 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram / Blank Holder): 2500 / 800 Tons Moving / Fixed Table: 1800 × 2600 mm Parallelism / Perpendicularity: 120 / 60 micron/m Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø565 mm – Ck45 (4 units) Blank Holder Cylinder: Ø450 mm – Ck45 (2 units) Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 132 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 100 t, eigos ilgis: 600 mm, stalo plotis: 800 mm, stalo ilgis: 800 mm, tarpas tarp stulpų: 800 mm, atitraukimo jėga: 40 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH 100/40 Ton Four-Column Hydraulic Deep Drawing Press General Description The CRONOSSTECH 100/40 ton four-column hydraulic deep drawing press is an industrial solution with a rigid four-column body structure, engineered for metal forming, deep drawing, and precision pressing applications. The frame is fabricated from St52 quality steel and subjected to stress relief treatment by vibratory methods. This design ensures high parallelism and perpendicularity tolerances are maintained over prolonged periods. The ram and cushion systems operate independently; stroke and pressure settings are precisely controlled via touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 efficiency class motor, and PLC-controlled architecture, the press delivers high efficiency, reliability, and a long service life. The automatic lubrication system and electronic filter contamination warnings minimize maintenance requirements. This model is an ideal solution for medium-scale serial production, die trial runs, and precision forming operations. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touchscreen panel - High precision and repeatability - Low maintenance cost and long service life Applications - Metal spinning and forming operations - Deep drawing applications - Die trial runs and prototype production - Auxiliary pressing operations ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 units, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 100 tons CAPACITY (CUSHION): 40 tons DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (CUSHION): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 700 mm WELDING STRESS RELIEF: Via vibration WELDING PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/s MOVABLE TABLE FORMING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s CUSHION TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE DIAMETER: Ø 230 mm – Ck45 CUSHION CYLINDER BORE DIAMETER: Ø 145 mm – Ck45 AUXILIARY BOOSTER CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3500 mm APPROXIMATE PRESS WIDTH: 1150 mm APPROXIMATE PRESS DEPTH: 1150 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1200 mm Lrjdpfox N Ulyex Af Hjr MAIN FILLING VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable from screen) RAM / CUSHION STROKE & TONNAGE ADJUSTMENT: Adjustable from screen SYSTEM & PRESS STATUS INFO: Viewable via display DIE MEMORY: Adjustable from screen LINEAR DISTANCE ENCODER: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 7.5 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, galia: 22 kW (29,91 AG), eigos ilgis: 310 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 110 mm/s, stalo aukštis: 955 mm, gerklės gylis: 410 mm, darbinis plotis: 4 100 mm, lenkimo jėga (didž.): 320 t, atstumas tarp stulpų: 3 600 mm, valdymo tipas: CNC valdymas, atgalinio ribotuvo reguliavimas: valdomas CNC, ašių skaičius: 4, karūnavimo tipas: varomas varikliu, pavaros tipas: hidraulinis, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC Control Unit • Servo-motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promecam quick-release die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper punch (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic top and bottom die clamping • Wide lower table for multi-channel dies • Rear backgauge X-axis travel of 1000 mm • AKAS or DSP front laser safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Tons) 320 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Lrodpfsx Nn I Ujx Af Hsr Daylight (Open Height Between Upper and Lower Beams) (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Approach Speed (mm/s) 150 Return Speed (mm/s) 110 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 290 Machine Weight (kg) 16800 Main Motor (kW) 22 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wedge) Safety System Front laser safety Country of Origin Turkey

Būklė: naujas, Gamybos metai: 2025, galia: 30 kW (40,79 AG), eigos ilgis: 310 mm, darbinis greitis: 8 mm/s, atbulinės eigos greitis: 80 mm/s, stalo aukštis: 1 055 mm, gerklės gylis: 510 mm, darbinis plotis: 6 100 mm, lenkimo jėga (didž.): 400 t, atstumas tarp stulpų: 5 100 mm, valdymo tipas: CNC valdymas, atgalinio ribotuvo reguliavimas: valdomas CNC, ašių skaičius: 4, karūnavimo tipas: varomas varikliu, pavaros tipas: hidraulinis, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo motorized backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge type) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-channel tooling • Backgauge X travel up to 1000 mm • AKAS or DSP front safety system with laser light • Additional backgauge fingers • Additional backgauge stop TECHNICAL SPECIFICATIONS VALUE Bending Force (Tons) 400 Bending Length (mm) 6100 Distance Between Columns (mm) 5100 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 510 Table Height (mm) 1055 Approach Speed (mm/s) 100 Return Speed (mm/s) 80 Lrsdpsx Nn Syefx Af Her Pressing Speed (mm/s) 8 Oil Tank (L) 400 Machine Weight (kg) 33000 Main Motor (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wedge type) Safety System Laser front safety Origin Turkey

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: CNC valdymas, pavaros tipas: hidraulinis, darbinis plotis: 3 100 mm, pjovimo kampas (min.): 0,5 °, pjovimo kampas (maks.): 3 °, eigos dažnis (min.): 13 aps./min, maks. lakšto storis: 10 mm, plieno lakšto storis (maks.): 10 mm, Standard Features • ELGO P40T Touchscreen NC Control Unit • Rexroth / Hoerbiger hydraulic system • Automatic CNC-controlled blade gap, stroke, and cutting angle adjustment • 1,000 mm NC-controlled, programmable, motorized backgauge • 250 mm throat depth • Programmable backgauge retract movement • Backgauge rise function for parts longer than 1,000 mm • Programmable cutting length via control panel to increase cycle count for short cuts • Ball transfer sheet support table • Upper blade with 2 cutting edges / lower blade with 4 cutting edges • Special joint system reducing maintenance requirements • 1,000 mm front support arms, with ruler, T-slot, and stopper • Front and side safety guards • Cutting line illumination and shadow wire • 1,000 mm front finger guard with foldable cover • Foot pedal • Movable control panel and protective cabins • Emergency stop buttons Optional Features • Rear pneumatic sheet support system (Type 1) • Rear pneumatic sheet support system with front feed (Type 2) • Adjustable angle gauge 0-180º • Front support arms in custom lengths • Special throat depth 500 mm • Full-length foldable front finger guard cover • Front finger safety light curtain • Special blade • Laser cutting line Lodpfex Npddox Af Hjrr • Oil heater or oil cooler • Automatic or manual central lubrication • Electrical cabinet with air conditioning • CNC front support sheet followers • Rear light barrier compliant with CE standards • Light type guards TECHNICAL SPECIFICATIONS VALUE Cutting capacity (450 N/mm²) 10 mm Cutting capacity (700 N/mm²) 6 mm Cutting length 3100 mm Cutting angle 0.5 – 3° Cutting speed / Fast mode 7 / 13 strokes per minute (spm) Throat depth 250 mm Backgauge travel (X) 1000 mm Table length 3600 mm Table width 880 mm Motor power 22 kW Weight 10.5 tons

Būklė: naujas, Gamybos metai: 2024, Vamzdžio skersmuo (maks.): 38 mm, Lenkimo kampas (maks.): 190 °, lenkimo spindulys (maks.): 250 mm, bendras ilgis: 4 280 mm, bendras plotis: 1 000 mm, bendras aukštis: 1 500 mm, garantijos trukmė: 12 mėnesiai, plieno lakšto storis (maks.): 3 mm, MAXIMUM CAPACITY : Ø38 x 3 mm MAXIMUM BENDING RADIUS : 250 mm BENDING ANGLE : 190 degrees WORKING LENGTH : 3000 mm MOTOR POWER : 7.5 kW LENGTH : 4650 mm WIDTH : 1000 mm HEIGHT : 1500 mm BENDING SPEED : Adjustable STANDARD FEATURES Custom-sized bending die according to customer specifications Servo motor-controlled feed axis Servo motor-controlled rotation axis Automatic submission of detailed operation reports via email Servo bending axis (SFB 38-CNC/R1) Gear-driven bending system (51-65-76-90) Mobile CNC control unit with 21” color display 3D bending simulation Ljdpfx Asu Hi T Eof Hsrr Display of daily, weekly, and monthly total production quantities Calculation of total material length to be used Estimation of bending process duration Conversion of X-Y-Z data to Y-B-C Remote assistance capability Portable foot pedal with emergency stop Manual – Automatic bending mode Mandrel – Non-mandrel bending Switch-protected safety guard behind bending head Automatic mandrel lubrication system (SFB 38 CNC/R1) Hydraulic clamping Hydraulic mandrel Hydraulic support Hydraulic oil cooler Hydraulic linear slider system Hydraulic collet chuck Electrical panel safety lock with key lock Electrical panel cooler Overload protection

Būklė: naujas, Gamybos metai: 2024, Vamzdžio skersmuo (maks.): 76 mm, galia: 3 kW (4,08 AG), garantijos trukmė: 12 mėnesiai, COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 12 MONTHS Standard Equipment - Self-memory NC control screen ensures professional and user-friendly operation - Capability to bend pipes up to Ø 76mm x 3 mm - Clamping device supports the pipe during fixation on the machine - Spare holes for mounting special tools - Welded steel construction frame - Thermal – Power & Reset indicators - Emergency stop button - Machine features 500 internal program memory - Minimum bending radius is 2 times the pipe diameter (Ø), depending on pipe wall thickness and material - Ø 33.7 mm standard pipe die set included - Operation manual MODEL NBM 76 Minimum Diameter mm 80 Maximum Diameter mm 440 Working Speed m/min 7 Motor Power kW 4 Ljdpfevkublox Af Hsrr Weight kg 260 Dimensions (L x W x H) 850 x 850 x 1050 Bending Capacities NBM 76 Thick Walled Pipes mm 76×3 Black Steel Pipe mm 70×5 Aluminium Pipe mm 76×6 Solid round bar (black steel) mm 45 Square tube (black steel) mm 50x50x5

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 250 mm, viršutinio volo skersmuo: 250 mm, šoninio volelio skersmuo: 200 mm, vėjo ilgis: 2 050 mm, maks. lakšto storis: 12 mm, STANDARD EQUIPMENT Very well suited for bending light and medium gauge sheet, aluminum or stainless steel materials Ideally suited for rolling materials into round and various diameters Bottom and side rolls are hydraulically operated up and down in a direct linear motion Protected against overload Top roll driven by electric motor and planetary gearbox; bottom roll driven by a cardan coupling system; two rolls power-driven Roll positions can be easily read on three digital position indicators Rolled parts can be removed easily thanks to the hydraulically opening head Very easy operation with movable control panel Welded steel construction frame SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Cone bending system Hydraulic balancing system for parallel movement of shafts Compliant with EU safety standards and marked with CE User manual OPTIONAL EQUIPMENT Remote assistance with NC control Top crane (hoist) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Dual-speed adjustment system Infinitely variable speed adjustment Ledpfxow Slxzo Af Horr Rotation driven by hydromotor Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Rolls: 250 mm Side Rolls: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 lt Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 460 mm, viršutinio volo skersmuo: 460 mm, šoninio volelio skersmuo: 380 mm, vėjo ilgis: 4 100 mm, maks. lakšto storis: 25 mm, galia: 38,5 kW (52,35 AG), STANDARD EQUIPMENT * The lower and side rolls move up and down linearly via pistons hydraulically connected to the machine body * Protected against overload * The upper roll and side rolls are driven by hydromotor and planetary gearbox (three-roller motor drive) * Position of the rolls can be easily read with three digital displays * The hydraulically opening head and automatically lifting shaft allow for easy removal of the bent part * Very easy operation with mobile control panel * Welded steel construction body * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending: 16/20 mm Bending: 20/25 mm Upper & Lower Roll: 460 mm Side Roll: 380 mm Ledpfjw Sl I Nsx Af Hjrr Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 6950 mm Width: 2300 mm Height: 2350 mm Weight: 29,500 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 350 mm, viršutinio volo skersmuo: 350 mm, šoninio volelio skersmuo: 260 mm, vėjo ilgis: 2 550 mm, maks. lakšto storis: 25 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls move linearly up and down via hydraulic pistons connected to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotor and planetary reducer (3-roll motor drive) * Easy-to-read position of rolls with three digital displays * Hydraulically opening head and automatically lifting shaft make it easy to remove the bent part * Very easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of shafts (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (hoist) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic plate removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 16/20 mm Bending: 20-25 mm Upper & Lower Roll: 350 mm Side Roll: 260 mm Lsdpfx Aew Smb Rof Horr Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 280 mm, viršutinio volo skersmuo: 280 mm, šoninio volelio skersmuo: 220 mm, vėjo ilgis: 2 550 mm, maks. lakšto storis: 16 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls are moved up and down linearly by pistons connected hydraulically to the frame * Protected against overload * Upper and side rolls are driven by hydraulic motors and planetary gearboxes (3 roll motor drive) * The positions of the rolls can be easily read via three digital displays * Easy removal of the bent part thanks to hydraulically opening head and automatically lifting shaft * Very easy operation with the movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 - 320 - 350 - 380 - 400 - 460) Lrjdpfxsw Smfcj Af Her TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending Capacity: 10/12 mm Bending Capacity: 12/16 mm Upper & Lower Roll Diameter: 280 mm Side Roll Diameter: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 – 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, galia: 8 kW (10,88 AG), STANDARTINĖ ĮRANGA Plieninė suvirinta konstrukcija Trys motoru varomi volai Iš specialios aukštos stiprumo medžiagos pagaminti ir grūdinti bei šlifuoti velenai Horizontali ir vertikali darbo padėtis Grūdinti standartiniai volų ratai Atskiras nuo įrenginio judrus valdymo pultas Mechaniniai rankiniai šoniniai atmušėjai, judantys 3 kryptimis Tiksli lenkimas su stabdžiu įrengtu varikliu Skaitmeniniai indikatoriai (2 vnt.) Lrodpfsw Smi Isx Af Hsr PAPILDOMA ĮRANGA Vamzdžių ir profilių lenkimo volai Papildomos dviejų ašių hidraulinės šoninės atmušos Automatika su NC valdymu TECHNINĖS CHARAKTERISTIKOS Velenų skersmuo: 100 mm Volų skersmuo: 315 mm Darbinis greitis: 7 m/min Variklio galia: 7,5 kW Ilgis: 2000 mm Plotis: 1450 mm Aukštis: 1700 mm Svoris: 3650 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 65 mm, Vamzdžio ilgis (maks.): 3 000 mm, Vamzdžio sienelės storis (maks.): 3 mm, Lenkimo kampas (maks.): 190 °, lenkimo spindulys (maks.): 250 mm, ašių skaičius: 5, garantijos trukmė: 12 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, dokumentacija / vadovas, kojinis nuotolinio valdymo pultas, STANDARD EQUIPMENT • 3 sets of tooling (1 set of rolling dies and 2 sets of bending dies, or 3 sets of bending dies, according to required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo-driven feed axis • Servo-driven rotation axis • Servo-driven bending axis • Servo-driven H and V axes • 21” TFT touch-screen mobile CNC control unit • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operating status reports • Workpiece length calculation • Estimated bending time calculation • Conversion from X-Y-Z to Y-B-C Lrjdpfxsxircge Af Hsr • Mobile foot pedal with emergency stop function • Remote assistance • Mandrel bending and non-mandrel bending • Safety plate behind the bending head • Hydraulic clamping • Hydraulic mandrel • Hydraulic support • Hydraulic linear guiding system • Hydraulic jaw clamp • Electrical panel safety lock and lockable panel with key • Electric system cooler • Overload protection • Detailed working report automatically sent OPTIONAL EQUIPMENT (Not included in price) • Additional tooling sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Additional mandrel length (up to 6 m) – per meter • Ball mandrel and wiper die • Automatic mandrel lubrication system (for suitable tube diameters) • Hydraulic oil cooler CAPACITY MB-65 CNC / 5 AXIS Maximum capacity mm Ø65x3mm Maximum bending radius mm 250mm Maximum bending angle ° 190° Hydraulic pressure bar 50-200 Working length mm 3000 Rotation tolerances Adjustable Bending power kw 22.5 LxWxH mm 6350x1400x1600 Weight kg 3950

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 400 t, eigos ilgis: 60 mm, stalo plotis: 400 mm, stalo ilgis: 4 500 mm, eigos reguliavimas: 100 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Šie mūsų presai ir padavimo linijos, specialiai sukurti durų ir langų aksesuarų pramonei ir turintys tiek viengubą, tiek dvigubą darbo režimą, užtikrina maksimalų našumą ir ilgalaikį patikimą veikimą. Langų aksesuarų sektoriuje, kur neišvengiama masinė gamyba, mūsų presai ir sukaupta patirtis garantuoja aukščiausią klientų pasitenkinimą. - Presavimo jėga iki 400 tonų - Stalo ilgis iki 6000 mm - 2 arba 3 jungiamųjų strypų pasirinkimas - Automatinis nuolatinio grįžtamojo plono tepimo mechanizmas - Progresyvaus tepimo blokas - Prieiga prie preso iš priekio ir galo - Magnetiniais jutikliais valdomi stumdomieji dangčiai - Indukciškai grūdinti ir šlifuoti krumpliaračiai - Kūginėmis fiksavimo jungtimis tvirtinami krumpliaračiai ir stebulės PRESAVIMO JĖGA: 400 TONŲ APSISUKIMAI: 40-70 aps./min Lredpexrbpnofx Af Hjr EIGA: 60 MM MAKSIMALI FORMOS AUKŠTIS: 340 MM STALO-PRIEKINIO BLOKO AUKŠTIS: 400 MM REGULIAVIMAS: 100 MM VIRŠUTINIO STALO MATMENYS: 500x4500 MM APATINIO STALO MATMENYS: 400x4500 MM VARIKLIS: 30 KW VARIKLIO APSUKOS: 3000 aps./min

Būklė: naujas, Gamybos metai: 2024, Vamzdžio skersmuo (maks.): 65 mm, Lenkimo kampas (maks.): 190 °, lenkimo spindulys (maks.): 250 mm, bendras ilgis: 4 950 mm, bendras plotis: 1 250 mm, bendras aukštis: 1 600 mm, garantijos trukmė: 12 mėnesiai, aliuminio lakšto storis (maks.): 3 mm, plieno lakšto storis (maks.): 3 mm, MAXIMUM CAPACITY: Ø65x3 mm MAXIMUM BENDING RADIUS: 250 mm BENDING ANGLE: 190° WORKING LENGTH: 3000 mm MOTOR POWER: 15.5 kW LENGTH: 4950 mm WIDTH: 1250 mm HEIGHT: 1600 mm BENDING SPEED: VARIABLE STANDARD FEATURES One set of bending dies per customer specifications Servo motor-driven feed axis Servo motor-driven rotation axis Automatic detailed work report via email Servo bending axis (SFB 38-CNC/R1) Reducer-driven bending system (51-65-76-90) Mobile CNC control unit with 21” color display 3D simulation bending Display of daily, weekly, and monthly total production quantities Calculation of total material length to be used Estimation of bending process duration Conversion of X-Y-Z coordinates to Y-B-C Remote support capability Portable foot pedal with emergency stop Manual or automatic bending Mandrel and non-mandrel bending Safety shield with switch behind the bending head Automatic mandrel lubrication system (SFB 38 CNC/R1) Hydraulic clamping Hydraulic mandrel Hydraulic support Hydraulic oil cooler Hydraulic linear slider system Hydraulic collet Electrical cabinet safety lock and key switch lock Lrjdpeu Hi Rqjfx Af Hsr Electrical panel cooler Overload protection

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 250 t, eigos ilgis: 200 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 200 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Eccentric presses are mechanical press types powered by forces generated through an eccentric mechanism, widely used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses offer high stability and process safety thanks to their rigid frame construction. The CRONOSSTECH CEHP-TB-250 – H Type Eccentric Press 250 Ton is designed to deliver stable operation in high-volume production while focusing on die protection and operator safety. With its monoblock frame, 8-point guided ram system, hydraulic overload safety, and automatic lubrication infrastructure, it ensures reliable performance under continuous production conditions. Key Advantages - Stable operation with large dies thanks to 1200×1000 mm table size - Die/equipment protection with hydraulic overload safety device - Controlled and user-friendly operation via PLC + touchscreen - High operator safety with light curtain protection - Low maintenance needs thanks to automatic lubrication system Areas of Application - Punching / cutting / die forming applications - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel fabricated frame • Pneumatic clutch-brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke via single connecting rod • Ram with counterbalance piston • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor movement • Hydraulic overload safety device • Motorized ram adjustment mechanism • Light curtain protection • Enclosed gear group in oil reservoir • Dual-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover in front of the table • Custom die specifications as required ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-250) Capacity: 250 Ton Table-Ram Distance: 500 mm Housing Width: 1230 mm Ram Adjustment: 120 mm Ljdpfx Afsx N Sc As Hjrr Press Width: 2900 mm Press Depth: 2550 mm Press Height: 4600 mm Table Dimensions: 1200×1000 mm Ram Face Size: 1200×1000 mm Stroke (Fixed): 200 mm Motor Power: 37 kW Weight: 31,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 150 t, eigos ilgis: 600 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 200 mm, atitraukimo jėga: 50 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting mechanism to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. The 8-guided H-frame structure delivers maximum rigidity throughout the pressing process, maintaining stable parallelism and perpendicularity tolerances along the stroke. Lodpfx Afex N T U He Hsrr The CHSP 150/50 model features a 150-ton main ram and a 50-ton blank holder ram (cushion), specifically designed for precise and repeatable deep drawing operations. The frame construction is stress-relieved by vibration, ensuring reliable and long-lasting performance. ⚙️ Standard Equipment - Steel construction H-frame body with 8 slider guides - Vibration stress-relieved frame design - Bronze Zr14 slide bearings - WPQR and WPS certified welding by TÜRK-AK accredited inspector (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion force (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Display for monitoring hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 150/50 - Type: Steel construction H-frame with 8 slider guides - Frame Material: St52 – ERDEMİR - Slide Bearing: Bronze Zr14 - Main Ram Capacity: 150 tons - Cushion Capacity: 50 tons - Moving Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Ram Stroke: 600 mm - Cushion Stroke: 200 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Weld Stress Relief: Vibration - Welding Procedure: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1/2017 (All welding operations supervised by certified Welding Coordination Engineers in accordance with EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 18.5 kW – IE3 - Main Pump: 32 cm³ – REXROTH or PARKER - Fast Down Speed of Moving Table: 150 mm/sec - Spinning Speed of Moving Table: 12 mm/sec - Return Speed of Moving Table: 170 mm/sec - Cushion Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø280 mm – Ck45 - Cushion Cylinder Bore: Ø160 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approximate Press Height: 3650 mm - Approximate Press Width: 2950 mm - Approximate Press Depth: 2000 mm - Fixed Table Height from Floor: 1250 mm - Main Pre-Fill Valve: NG 100 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Measurement Sensor: NOVATECHNIK or TURCK - PLC Control: DELTA - Touchscreen Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 11 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 3, apatinio volelio skersmuo: 250 mm, viršutinio volo skersmuo: 250 mm, šoninio volelio skersmuo: 200 mm, vėjo ilgis: 2 550 mm, maks. lakšto storis: 10 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Mobile control panel Centrally driven rolls powered by motor Hydraulic up-down movement rear roll and bottom roll Precision bending with braked main motor Conical bending and pre-bending system Bottom and top rolls driven by planetary gearbox Rear Roll Ball System to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) Operating manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter rolling Hydraulic side supports for large diameter rolling Ground and polished rolls Wire grooves on shaft ends NC Control unit Dual speed operation Stepless speed adjustment Ejector system Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 liters Length: 4500 mm Width: 1200 mm Height: 1370 mm Lrodpfsw Slcgjx Af Her Weight: 4800 kg

Būklė: naujas, Gamybos metai: 2025, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 320 mm, viršutinio volo skersmuo: 320 mm, šoninio volelio skersmuo: 240 mm, darbinis plotis: 2 050 mm, maks. lakšto storis: 25 mm, Įranga: avarinis stabdymas, dokumentacija / vadovas, grūdinti volai, kojinis nuotolinio valdymo pultas, STANDARD EQUIPMENT * The lower, upper, and side rolls move linearly up and down via body-mounted hydraulic pistons * Protected against overload * Upper and side rolls driven by hydromotor and planetary gearbox (all 3 rolls are motor-driven) * Positions of the rolls can be easily read with three digital displays * Rolled parts are easily removed thanks to the hydraulically opening head and the shaft that automatically lifts upwards * Very easy operation with a movable control panel * Welded steel frame construction * Induction-hardened SAE 1050 (CK 50), forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed working system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) for support during large-diameter bending * Hydraulic side supports for large-diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 16 / 20 mm Bending: 20 / 25 mm Upper & Lower Roll Diameter: 320 mm Side Roll Diameter: 240 mm Lrsdpfx Afjxw Eblj Hsr Motor Power: 20 kW Bending Speed: 1.5 – 5 m/min Length: 4350 mm Width: 1800 mm Height: 1950 mm Weight: 10,500 kg

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 125 t, stalo plotis: 700 mm, stalo ilgis: 900 mm, pramušama skylė stalo paviršiuje: 210 mm, hidraulinio cilindro reguliavimas: 100 mm, Įranga: apsaugos šviesos užtvara, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief by vibration applied to frame and welded components - Parallelism and perpendicularity tolerances between tables conform to ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Slide guided on 8 bearings - Ram equipped with cushioning cylinder - Parts such as ram, connecting rod, and slide block are made of GS52 cast steel - High-strength one-piece crankshaft – 4140 - Bronze bushing for connecting rod (Zr14) - Rear-mounted flywheel Lrsdpfxsvxhqvo Af Her - Spare bolster table - Hydraulic overload protection - Motorized die height adjustment - Automatic centralized lubrication - Pneumatic pedal with lock and dual hand control with timer - Electric stroke counter - PLC system and touch screen - DELTA - Electrical switchgear by SIEMENS/SCHNEIDER - CE compliance – Optional - Finger protection light curtains – SICK, LEUZE - Safety PLC (controls entire electrical system, valve, dual hand control, and pedal) – PILZ - Dual coil safety valve – GPA, TOPAIR - Interlock position switch and control panel - Safety block - Protective enclosures in compliance with CE regulations MODEL: D-TYPE MONOBLOCK FRAME Capacity: 125 Ton Bed-to-Ram Distance: 500 mm Distance Between Columns: 1000 mm Ram Adjustment: 100 mm Approx. Press Width: 1250 mm Approx. Press Depth: 1750 mm Approx. Press Height: 2850 mm Table Hole Diameter: 210 mm Table Dimension: 700 x 900 mm Die Mounting Slot Diameter: 55 mm Ram Dimension: 340 x 550 mm Bed Height from Floor: 850 mm Stroke Adjustment: 10 – 125 mm Strokes per Minute: 50 spm Motor Power: 11 kW Motor Speed: 1450 RPM Approx. Weight: 8,500 kg

Būklė: naujas, Gamybos metai: 2025, MAXIMUM CAPACITY: Ø51 x 3 mm Lrjdpfx Ajvyzwrjf Hor MAXIMUM BENDING RADIUS: 250 mm BENDING ANGLE: 190 degrees WORKING LENGTH: 3000 mm MOTOR POWER: 13.5 kW BENDING SPEED: VARIABLE STANDARD FEATURES - One set of bending dies according to customer-specified dimensions - Servo motor-driven feeding axis - Servo motor-driven rotation axis - Automatic emailing of detailed work reports - Servo bending axis (SFB 38-CNC/R1) - Gearbox-driven bending system (51-65-76-90) - Mobile CNC control unit with 21” color display - 3D bending simulation - Display of daily, weekly, and monthly total production quantity - Calculation of total material length required - Calculation of estimated bending operation time - X-Y-Z to Y-B-C data conversion - Remote assistance - Portable foot pedal with emergency stop - Manual – Automatic Bending - Mandrel & Non-mandrel bending options - Safety shield with switch at rear of bending head - Automatic mandrel lubrication system (SFB 38 CNC/R1) - Hydraulic clamping - Hydraulic mandrel - Hydraulic support - Hydraulic oil cooler - Hydraulic linear slider system - Hydraulic collet - Electrical panel safety lock and keyed panel lock - Electrical panel cooler - Overload protection

Būklė: naujas, Gamybos metai: 2025, galia: 15 kW (20,39 AG), spaudimo jėga: 160 t, stalo plotis: 920 mm, stalo ilgis: 660 mm, gerklės gylis: 320 mm, perforavimo jėga: 160 t, cilindro skersmuo: 55 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press that operates with force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C Frame Eccentric Press 150 Ton is specifically designed for stable performance in cold forming applications. With its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure, it delivers reliable, series-production-ready performance. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + two-hand/foot pedal control Applications - Cold shearing and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-point slide guidance • Spheroidal cast connecting rod and gear housings • Crankshaft and drive shafts manufactured from 4140 tempered steel • Fully automatic central grease lubrication system • Pneumatic clutch and brake combination • Compliance with CE safety directives • Dual-coil safety valve Lredpfx Afjvtywds Hor • Manually adjustable stroke • Light curtain hand/finger safeguarding system • PLC control system • Two-hand/foot pedal control system • Mechanical lock system • Emergency reverse motor function • Compliance with occupational health and safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 tons) • Hydraulic lock system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies to required specifications • Eight-point slide guidance ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton Throat depth: 320 mm Table–ram distance: 500 mm Slide–table opening: 540 mm Distance between uprights: 500 mm Ram adjustment (shut height): 120 mm Approx. machine width: 1600 mm Approx. machine depth: 2280 mm Approx. machine height: 2750 mm Front anchorage dimension: 840 mm Side anchorage dimension: 1300 mm Table bore diameter: Ø220 mm Table size: 660×920 mm Die clamping slot diameter: Ø55 mm Ram size: 600×290 mm Floor to table height: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1450 rpm Approx. weight: 7100 kg Note: Please inform us for any modification requests on the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.