Acea Xcelligence Rtca Cardio pirkti naudotą (714)

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,000 Leasing rate: €1,077.30 Bending length: 2,550 mm Max. bending capacity - structural steel: 13 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 260 mm Bottom roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,800 kg 4 rolls Kdedpfx Aajyb Sy Rsusk Top roll driven by hydraulic motor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital readout for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES ON CONE BENDING: The max. sheet thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €46,300 Leasing rate: €884.33 Bending length: 2050 mm Max. bending capacity – structural steel: 11 mm Max. sheet thickness without pre-bending at D=5× top roll: 11 mm Max. sheet thickness without pre-bending at D=1.5× top roll: 9 mm Max. sheet thickness with pre-bending at D=5× top roll: 9 mm Max. sheet thickness with pre-bending at D=1.5× top roll: 7 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 4080 kg 4 rolls Top roll powered by hydraulic motor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Conical bending device Hydraulic relief of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Kedpfxeyb Szuj Aauodk The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,700 Leasing rate: €996.03 Bending length: 2,550 mm Max. bending capacity – structural steel: 10 mm Max. sheet thickness without pre-bending at D = 5x top roll: 10 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D = 5x top roll: 8 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 6 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,170 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, bottom roll drive by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Kdsdpfx Aaeyb Sykjusk Digital display for bottom and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Maximum sheet thickness is 50% of the nominal capacity Cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: geras (naudotas), Gamybos metai: 2007, SCM Compact XL Four-Sided Planer – Made in Italy – Year of manufacture: 2007 TECHNICAL SPECIFICATIONS: Planing width: 230 mm Planing height: 120 mm 1) Bottom horizontal spindle 230 mm – 5.5 kW 2) Right vertical spindle 130 mm 3) Left vertical spindle 130 mm (2nd and 3rd spindle) – 11 kW 4) Top horizontal spindle 230 mm – 7.5 kW All spindles: up/down, right/left Spindle diameter: 40 mm From above: 3 steel infeed rollers, knurled, including 2 double rollers From above: double outfeed roller, rubber-coated Side pressure unit: 1 pc Feed roller in lower table: rubber-coated Feed on Cardan shaft rollers Pneumatic pressure units Infinitely variable feed speed: 5–22 m/min Feed motor: 1.1 kW Electric planing thickness adjustment Motorized lifting: 0.37 kW Infeed table length: 2470 mm Enclosed in sound-insulated cabin Centralized table lubrication Extraction port diameters: 150 and 180 mm Ksdpfx Ajhrdmisausdk Dimensions (L/W/H): 3650 x 1200 x 1600 mm Weight: approx. 1500 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 1995, Four-Sided Planer Weinig Profimat 23E - German production - Year of manufacture: 1995 - Right and left spindles equipped with end-milling cutters ensuring parallelism and a 90° right angle - Element width measurement - Electronic width adjustment TECHNICAL PARAMETERS: Planing width: 230 mm Planing height: 120 mm Electronic planing width control 1st (bottom) spindle: 4 kW 2nd (right) spindle: 4 kW 3rd (left) spindle: 4.2 kW (end milling) 4th (right) spindle: 4.2 kW (end milling) 5th (top) spindle: 7.5 kW Element width measurement Electric adjustment of feed roller height Electric adjustment of top spindle height Spindle diameter: 40 mm Six upper steel rollers One upper rubber roller One feed roller integrated into the table Pneumatic pressure system Feed driven by cardan shafts Length of infeed table: 2,470 mm Port diameter: 140 mm Kdedpfxsibq Nie Aausk Machine dimensions: 456 x 240 x 220 cm Weight: 4,000 kg

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2050 mm Maximum bending capacity (mild steel): 16 mm Max. plate thickness without pre-bending at D = 5x top roll: 16 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 13 mm Max. plate thickness with pre-bending at D = 5x top rolls: 13 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Kjdpfx Ajynm Ehsauodk Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1550 mm Weight: 6100 kg Four rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Hydraulic drop-end bearing Two working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: - Infinitely variable rolling speed - Hydraulic side support - Hydraulic top support - NC control IMPORTANT POINTS FOR CONICAL ROLLING: - Maximum plate thickness for conical rolling is 50% of rated capacity - Cone length must be max. 30% or more than 60% of roll length - Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Ksdpfxsynm D Rs Aaujdk Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 260 mm Bottom roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,550 mm Weight: 7,685 kg 4 rolls Top roll drive via hydraulic motor and planetary gearbox, bottom roll drive via gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end 2 working speeds Overload protection Movable control console Equipment compliant with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity Cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without prebending at D = 5x top roll: 9 mm Max. sheet thickness without prebending at D = 1.5x top roll: 7 mm Max. sheet thickness with prebending at D = 5x top roll: 7 mm Max. sheet thickness with prebending at D = 1.5x top roll: 5 mm Top roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower rolls driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE standard OPTIONS: Infinitely variable rolling speed Kdsdpfxoynmzps Aaujk Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of rated capacity The cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity - mild steel: 10 mm Max. plate thickness without pre-bending at D = 5x top roll: 10 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 8 mm Max. plate thickness with pre-bending at D = 5x top roll: 8 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 6 mm Top roll diameter: 200 - 220 mm Bottom roll diameter: 200 - 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor output: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Kdjdpsynmyfofx Aauok Top roll driven by hydraulic motor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of the top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment compliant with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The maximum sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roll: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 220 mm Lower roll diameter: 200 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll unloading Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Kjdpfx Aasynmx Iouedk Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of rated capacity The cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Būklė: geras (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2020.12.171, bendras plotis: 3 590 mm, bendras aukštis: 2 910 mm, bendras ilgis: 2 210 mm, šlifavimo plotis: 2 600 mm, šlifavimo juostos greitis: 2 400 mm/s, šlifavimo juostos ilgis: 3 250 mm, ruošinio aukštis (maks.): 80 mm, šlifavimo juostos plotis: 2 650 mm, oro poreikis: 192 m³/val, Heesemann Automatic Sander KSA 8, 2600 mm Wide Belt Sander The sander consists of: 1. Frame Structure For supporting the conveyor bed, with mounting option for 1 sanding unit and 1 brushing device. 2. Conveyor Bed Individual conveyor belts, feed speed adjustable from 5 – 25 m/min via frequency control, working height constant at 920 mm. Adjustment to workpiece thickness (3 – 80 mm) by height adjustment of the entire machine top section. Monitoring of the toothed belts for the lifting gear at a height adjustment speed of 3 mm/s, including integrated control cabinets. 3. Industrial PC 21.5" Capacitive multitouch color display, 1,920 x 1,020 pixel resolution, CF card, operating system Windows Embedded Standard, with production data acquisition (display of production and downtime). Ethernet interface available. Program storage for 1,000 programs. Motor speed values are stored and set automatically when a program is selected. 4. Profinet Interface for Higher-Level Control 5. Longitudinal Sanding Unit with Contact Roller for Calibration (Steel) Imbalance quality Q 1 (precision balanced) according to VDI 2060, drive with Poly-V belt, maintenance-free bearings. Diameter: 350 mm. Sanding belt dimensions: 3,250 x 2,650 mm. Belt speed: 1–24 m/s. Drive power: 37 kW frequency inverter, stepless adjustment of belt speed. Wear-free braking system, intermittent belt cleaning, automatic infrared belt tracking, belt runs counter to feed, manual grit compensation. Infeed: segmented, pneumatically controlled pressure lip. Outfeed: continuous, pneumatically controlled pressure lip. 6. Brush Roller Unit, Central Height Adjustment, Incl. Extraction Hood and Pressure Roller Brush type: horsehair. Diameter: 250 mm. Drive power: 5.5 kW. 7. Workpiece Vacuum Clamping System For safe transport of workpieces shorter than 750 mm in feed direction, including integrated fan. Operating voltage: 400V, 50 Hz. Machine Paint Finish: Internal: Light grey, RAL 7035 External: Light grey, RAL 7035 Doors: Anthracite, RAL 7016 Belt change side: Left Terminal: Front left 8. Ionizing Bar from Above For discharge of static electricity, including high-voltage transformer. 9. Workpiece Blowing Unit with Rotating Compressed Air Nozzles, at machine outfeed, including extraction hood General Specifications of the Sander: Sanding width: 2,600 mm Working height: 920 mm Maximum workpiece thickness: 3 – 80 mm Dust Extraction: Required air velocity: at least 20 m/s Significantly higher extraction speeds may lead to functional disadvantages. Vacuum in the machine: approx. 1000 Pa Air Demand for: - 1 longitudinal sanding unit, roller diameter 350 mm (connection 1 x 330 mm): 103.0 m³/min - 1 brushing unit, diameter 250 mm (connection 1 x 206 mm): 38.0 m³/min Kjdpfx Asywuqreauodk - Workpiece blowing unit (connection 2 x 120 mm): 28.0 m³/min - Conveyor belt blowing (connection 1 x 160 mm): 24.5 m³/min - Fan exhaust for workpiece vacuum clamping (connection 1 x 180 mm): 30.5 m³/min Total air demand: 224.0 m³/min

Gamybos metai: 2011, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Universal Testing Machine Inspekt Table Blue 5kN Mechanical Structure: - 2 backlash-free ball screw spindles, driven by a DC servo motor, Fmax = 10 kN, stiffness 10 kN/mm - 1 test area up to nominal load: - Test area width: 420 mm - Max. test stroke without test tools, adapters, and KMZ: 1025 mm Travel Speeds: - Test speed: 0.0015 - 1000 mm/min at full load - Return speed: 1000 mm/min Force Measurement: - Measurement range: 0.8 - 100% of nominal load, Class 1 (optionally Class 0.5) (±1% of the displayed value according to DIN EN ISO 7500-1) - Resolution of force measurement: ±180,000 digits at 20 ms integration time The machine is delivered with a factory test certificate. If a factory or DKD calibration at the installation site is required at the customer's request, this service must be billed separately. Crosshead Travel Measurement: - Incremental square input with encoder monitoring, storage of crosshead position - Measurement resolution: 1 µm Dimensions (WxDxH) / Weight: - Load frame: 685 mm x 550 mm x 1420 mm / 100 kg – Controller mounted on load frame Standard Features: - Force, displacement, and strain control - Overload protection, automatic force calibration - Specimen break detector, return function - Set-up mode via control panel with display (force, travel) Data Processing: - USB 2.0 interface or LAN - Data transfer rate to PC: 50 Hz (standard); higher data acquisition rates available with special software module - Internal data processing rate: 2 ms - Optional: Up to 2 available expansion slots for plug-in modules (1-channel analog cards or 2-channel digital cards) for additional sensors Kedpfx Aajyyu I Njuodk 115/230 VAC, 0.5 kVA, 50/60 Hz, 5–40°C, 20–80% RH. Required options for operation: load cell, grips, PC (current standard, operating system 8-10-11, test software) Load Cell 5000N - Measurement range: 5–5000N tension and compression, with nominal 2mV/V output signal, overload protection ±100%, linearity ±0.05%, hysteresis ±0.03%, repeatability ±0.02%, including 1.5m connection cable and calibration certificate. Supplied with extensometer MFX 200 The MFX 200-B extensometer, thanks to its robust construction and high measuring accuracy, is suitable for almost all specimens with a starting gauge length from 10 mm. All elongations, from the modulus of elasticity to specimen break, can be recorded. It can be freely used in both the upper and lower test area. In combination with the MFQ-A, r- and n-value determination for thin sheets is also possible. Two different measurement systems are available, differing in measuring signal and some technical specifications (see technical documentation).

Būklė: naujas, Gamybos metai: 2026, Z-Mat TBX63S ZMATROL 15", 5-axis simultaneous machining (Siemens/Fanuc opt.) Turning/Milling Center with B-axis ±120°, 12,000 rpm 6" sub-spindle, Y-axis 150 mm Max. swing diameter: 450 mm Max. turning diameter: 250 mm Max. turning length: 750 mm Linear roller guides on all axes Main spindle Chuck diameter: 203 mm Spindle nose: A2-6 Max. bar capacity: 52 mm Spindle bore diameter: 66 mm Drive power, DDS: 18.5 kW Max. speed: 4,000 rpm Sub-spindle Chuck diameter: 152 mm Spindle nose standard: A2-5 Max. bar capacity: 46 mm Spindle bore diameter: 56 mm Drive power, DDS: 11 kW Max. speed: 5,000 rpm Milling spindle Spindle interface: HSK-T63 Max. speed: 12,000 rpm Drive power: 30 kW Max. torque: 95 Nm Axis travels X-axis travel with Heidenhain glass scale: 790 mm Y-axis travel: -75 mm Z-axis travel: 750 mm W-axis travel: 1,000 mm B-axis swivel range: ±120° Rapid traverse X, Y, Z, W axis: 24 m/min Tool magazine Double arm: 30 tools Max. diameter / length / weight: 78 mm / 250 mm / 8 kg Dimensions (W x D x H): 4.45 x 2.76 x 2.85 m Weight: 9.8 t Standard equipment: - 30 bar through spindle coolant Kedpsyv A Naofx Aauedk - Ergonomic control panel with handwheel - USB port, Ethernet memory card - Full enclosure - Door safety switch - Coolant unit - Electrical cabinet cooling - 3-color warning light - Work area lighting - Central lubrication system - Tools and toolbox - CE conformity - Operating manual A wide range of automation systems available, such as bar loaders and loading robots.

Gamybos metai: 1995, būklė: geras (naudotas), planing width: 220 mm planing height: 140 mm maximum tool diameter: 160 mm main motors: 2 x 5.5 kW feed motor: 3 kW feed speed: 6 – 36 m/min - inverter controlled feed via cardan shafts cutterheads supported on both sides Kedpfx Ajg E Uqcoausdk electric height adjustment

Būklė: naudotas, Gamybos metai: 2012, Number of spindles: 5 pcs Working width: 20-230 mm Planing height: 8-160 mm Used WINTER Four-Side Planer TIMBERMAX 5-23-U Kdsdpfx Aoyk Iddjaujk Year of manufacture: 2012 Serial No.: 12030 202 Technical Data: - Planing width: 20 - 230 mm - Planing height: 8 - 160 mm - 5 spindles (4+1) – spindle Ø 40 mm - Speed: 6000 rpm - Continuously adjustable feed speed: 5 - 30 m/min - Bottom straightening shaft, max. tool Ø 145 mm - Right vertical spindle, max. tool Ø 200 mm - Left vertical spindle, max. tool Ø 200 mm - Top thicknessing spindle, max. tool Ø 200 mm - Universal spindle, max. tool Ø 180 mm Max. saw blade Ø 250 mm (max. speed 3500 rpm) Spindle configuration: 1. bottom: 7.5 kW 2. right vertical: 5.5 kW 3. left vertical: 5.5 kW 4. top: 7.5 kW 5. universal spindle: 7.5 kW - Feed motor: 3.0 kW - Height adjustment motor: 1.1 kW - Total installed power: 37.8 kW - Infeed table length: 2000 mm - Universal spindle swivels 360° - Compressed air connection: max. 6 bar - Extraction ports: 5 x 150 mm - Dimensions (L x W x H): 3760 x 1730 x 1750 mm - Weight: 4500 kg Includes: - Hard chrome-plated tables - CE standard, TÜV Rheinland - Electrically adjustable upper spindle with feed system - Pneumatic side pressure before the left spindle - Lubricant pump - Pneumatic feed roller pressure - Feed system with cardan drive - 3 powered table rollers

Būklė: naujas, Gamybos metai: 2026, Number of spindles: 6 pcs. Working width: 20–230 mm Planing height: 8–160 mm Four-side planer and moulder WINTER TIMBERMAX 7-23 DS - Planing width: 20–230 mm - Planing height: 8–160 mm - 6 spindles - Spindle diameter: Ø 50 mm - Speed: 7,000 rpm - Continuously adjustable feed: 6–60 m/min - Bottom spindle, max. tool Ø 140–180 mm - Right spindle, max. tool Ø 140–250 mm - Left spindle, max. tool Ø 140–250 mm - Top spindle, max. tool Ø 140–250 mm - Second top spindle, max. tool Ø 140–250 mm - Lower spindle, max. tool Ø 140–250 mm - Second lower spindle, max. tool Ø 140–250 mm Spindle sequence: 1. Bottom: 11.0 kW 2. Right: 11.0 kW 3. Left: 11.0 kW 4. Top: 15.0 kW 5. Top: 15.0 kW 6. Bottom: 15.0 kW 7. Bottom: 15.0 kW - Feed motor: 11 kW - Height adjustment motor: 1.1 kW - Total power: 105 kW - Compressed air connection: max. 6 bar - Extraction ports: 6 x 180 mm - Dimensions: L = 5,660 mm, W = 2,100 mm, H = 1,700 mm - Weight: 9,000 kg Ksdpoyk Icmofx Aaujdk SCOPE OF DELIVERY: - Horizontal spindles with axial bearings (hydraulic head clamping) - Hard-chromed tables - CE and TÜV Rheinland certified - Pneumatic pressure before the left spindle - Lubrication pump - Pneumatic pressure for feed rollers - Cardan shaft drive - 5 driven rollers in the table Tooling set: - 1 x HM scoring saw 145 x 12.5 x 40 mm Z2 / V2 - 2 x aluminium planing heads 125 x 170 x 40 mm - 2 x aluminium planing heads 125 x 240 x 40 mm Set price: EUR 1,500 - Electrically adjustable top shaft with feed system: EUR 1,500

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 4960 x 1900 x 1700 mm Total power requirement: 0 kW Weight: 6000 kg TIMBERMAX 6-23-TT-TS PREMIUM Four-Sided Planer WINTER TIMBERMAX 6-23-TT-TS PREMIUM - Max. planing width (tool rotation diameter Ø140): 230 mm - Min. planing width (tool rotation diameter Ø140): 20 mm - Max. planing height (tool rotation diameter Ø140): 160 mm - Min. planing height (tool rotation diameter Ø140): 10 mm - Min. workpiece length: 650 mm - Max. feed table stroke: 5 mm - Max. infeed fence adjustment: 10 mm - Number of spindles: 6 - Spindle diameter: Ø40 mm - Spindle speed: 6000 rpm - Feed speed: 6–36 m/min - Tool diameter first lower spindle (rebate cutter Ø165 mm, planerhead Ø140 mm): Ø125–160 mm - Left, right, top, and second lower spindles: Ø112–200 mm Spindle sequence: - 1st lower spindle: 5.5 kW - 2nd right spindle: 5.5 kW - 3rd left spindle: 7.5 kW - 4th top spindle: 7.5 kW - 5th second lower spindle: 5.5 kW Kjdpfxsv Uciro Aausdk - 6th second top spindle: 5.5 kW - Width adjustment left spindle motor: 0.75 kW - Feed motor: 5.5 kW - Carrier lift motor height adjustment: 0.75 kW - Extraction connection: 6 x Ø125 mm - Feed roller diameter: Ø140×Ø35×50 mm - Vertical spindle adjustment range: 40 mm - Horizontal spindle adjustment range: 20 mm - Dimensions: L=4960, W=1900, H=1700 mm - Weight: 6000 kg INCLUDES: - with touch screen control - machine base made of cast iron - top spindle electrically adjustable with feed system - left spindle electrically adjustable - hard chromed tables - compliant with CE standard, TÜV Rheinland - pneumatic side pressure in front of left spindle - sliding lubricant pump - lubrication pump with central lubrication system - pneumatic pressure on feed rollers - feed system with cardan drive - 3 powered sliding rollers in the table

Būklė: naujas, Gamybos metai: 2025, Dimensions (Length/Width/Height): 4960 x 1900 x 1700 mm Total Power Requirement: 0 kW Weight: 6000 kg Four-Sided Planer WINTER TIMBERMAX 6-23-TT PREMIUM - Max. planing width (tool diameter f140): 230 mm - Min. planing width (tool diameter f140): 20 mm - Max. planing height (tool diameter f140): 160 mm - Min. planing height (tool diameter f140): 10 mm - Min. workpiece length: 650 mm - Max. feed table stroke: 5 mm - Max. adjustment range of infeed fence: 10 mm - Number of spindles: 6 - Spindle diameter: F40 mm - Spindle speed: 6000 rpm - Feed speed: 6–36 m/min - Tool diameter, first bottom spindle (jointing rebate cutter f165 mm, planer head f140 mm): F125–F160 mm - Left/right spindles, top spindle, second bottom spindle: F112–F200 mm Spindle Sequence - 1st bottom spindle: 5.5 kW - 2nd right spindle: 5.5 kW - 3rd left spindle: 7.5 kW - 4th top spindle: 7.5 kW - 5th second bottom spindle: 5.5 kW - 6th second top spindle: 5.5 kW - Width adjustment left spindle motor: 0.75 kW - Feed motor: 5.5 kW - Carrier lift height adjustment motor: 0.75 kW - Extraction ports: 6 × F125 mm - Feed roller diameter: F140 × F35 × 50 mm - Vertical spindle adjustment range: 40 mm - Horizontal spindle adjustment range: 20 mm Kodpfx Aaev Uchnsuodk - Dimensions: L=4960, W=1900, H=1700 mm - Weight: 6000 kg INCLUDES: - Machine frame made of cast iron - Electrically adjustable top shaft with feed system - Electrically adjustable left shaft - Hardened, chrome-plated tables - Conforms to CE, TÜV Rheinland certified - Pneumatic side pressure before the left spindle - Lubricant pump - Centralized lubrication pump - Pneumatic pressure on feed rollers - Feed system with cardan shaft drive - 3 powered table rollers

Gamybos metai: 1989, būklė: labai geros būklės (naudotas), 8 heads The last head is universal. Maximum planing height: 130 mm Maximum planing width: 240 mm Powered feed rollers on the table – suitable for wet wood Kdodomi A Dzjpfx Aaujk Repeatable heads – two on each side Stepless feed speed adjustment Cardan shaft feed drive

Gamybos metai: 2020, būklė: beveik kaip naujas (naudotas), Card Cutter Series 6 Multifinishing System Year of manufacture: 2021 Approx. 7,500 sheets processed Kdjdpjffdgpsfx Aausk Max. format: 330 x 1,100 mm Min. format: 210 x 210 mm Top-mounted suction feeder with conveyor belt Double-sheet detection via ultrasound Integrated registration mark reader for X/Y axis correction Adjustable paper skew compensation in X/Y axis 9" colour touchscreen 6 cutting tools with individual blades Including 1.0 mm creasing tool Easy and quick tool change with slide-in technology Creasing depth adjustable via display Integrated air supply system Tool set Operating manual (German)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 2 350 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, The used QUASER MV 184 C 4-axis vertical machining center is a medium-sized, CNC vertical machining center with a cast iron structure and roller-type linear guides for the table. Travels: X 1020 mm, Y 610 mm, Z 610 mm. Table size: 1200×600 mm with a maximum load capacity of 500 kg. Equipped with a continuous 4th axis TJR HR 255N rotary table, corresponding tailstock, and a milled table with T-slots. Spindle: ISO-40 (DIN 69871) at 10,000 rpm (max 18 kW), cooled by dedicated chiller, high-pressure through-spindle coolant, 30-position random tool changer with exchange arm, RENISHAW TS 27 tool presetting, wireless RENISHAW workpiece probe, and hinged belt chip conveyor. Year of manufacture: June 2017 (installed 2018), fitted with FANUC MILL I CNC with color LCD, Manual Guide i with remote handwheel, USB port, RS 232 serial, memory card slot, and FILTERMIST mist extractor for operational fumes. Machine is in PERFECT condition with only 2,350 cutting hours. Various additional equipment available upon request. Kodpjxf Nbrefx Aaujdk

Būklė: naujas, Number of sanding units: 2 pcs Sanding width: 290 mm Max. sanding height: 180 mm LÖWER DoubleSander Solid DSM 3000 ----- Double-sided single-piece wood sanding machine for sanding solid wood such as window profiles, etc. Robust top-quality design with long cast iron tables, brushing and finishing device, and conveyor belt feed. Suitable for high continuous loads even with higher material removal rates. - Offset arrangement of sanding and finishing units above and below - Direct-drive, rubber-coated sanding rollers for slip-free power transmission - Combination sanding via roller and pad enables high material removal with a uniformly flat contact area - Maintenance- and wear-free CERMET-coated sanding pads with excellent thermal conductivity and absolute dimensional accuracy - Auxiliary cooling of sanding zones for cooler sanding and longer abrasive belt lifespans - Forced-guide pneumatic belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large-dimensioned linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of material removal (bottom side) via precision lead screw with measurement display via dial ring (resolution 0.1mm) - Abrasive belt tensioning via pneumatic cylinder with constant clamping pressure - Quick abrasive belt change with pneumatic belt release in seconds - Adjustable belt tracking during changeover - Electro-pneumatic compressed air monitoring - Feed safety device via contact roller for excessively thick workpieces - Workpiece transport via calibrated slip-resistant and non-slip conveyor belts over heavy, 1000 mm long cast iron tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for jerk-free and uniform workpiece transport - Continuously variable feed gear motor for rapid adaptation to various wood types - All motors electrically protected - Ergonomically arranged controls on the infeed side Kedsyrty Topfx Aauedk - Digital thickness display (resolution 0.1 mm) with modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 300 mm - Working width: 290 mm - Sanding thickness: 2-180 mm - Two brake motors for drive: 7.5 kW - Feed motor: 1.0 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units, each 0.37 kW, with fiber brushes D 120 x 300 mm - Extraction ports: 2 x 120 mm and 2 x 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2,105 mm - Length with control panel: 2,490 mm - Width: 980 mm - Height: 1,910 mm - Weight: approx. 1,650 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE version ----- Price of the above-mentioned machine on request! ----- Optional accessories at extra cost: Workpiece blow-off: - Arranged via nozzles above and below at the machine outfeed, pneumatically controlled Abrasive belt blow-off: - Via nozzles directly at the radii of the tension rollers, situated within the dust extraction, timer-controlled on/off, each 5 sec, can be switched on separately Disc unit ...

Būklė: naujas, Number of grinding units: 4 pcs Sanding width: 190 mm Max. sanding height: 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single piece wood sanding machine with additional cross brushing unit (discs) and longitudinal brushing unit (roller) for sanding solid wood such as window scantlings, etc. Robust top-quality construction with long cast iron tables and conveyor belt feed. Suitable for heavy-duty continuous operation, even with higher material removal rates. 1. Belt sanding unit with CERMET sanding shoe for pre-sanding 2. Disc unit for cross sanding to remove fibers 3. Roller unit for longitudinal sanding to achieve a directed finish along the grain - Offset arrangement of sanding and finishing units above and below - Directly driven rubber-coated contact rollers for slip-free power transmission - Combined sanding via roller and shoe for high material removal rates with a flat engagement zone at the same time - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional accuracy - External cooling of the sanding zones for cooler sanding and increased belt life - Forced, pneumatically controlled belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Dust extraction for airborne dust at the tension rollers - Integrated brush sanding units (crosswise and lengthwise) with dust extraction - Motorized sanding thickness adjustment via precision threaded spindles and large-dimension linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment at the bottom via precision spindle with readout by scale ring (resolution 0.1 mm) - Sanding belt tension via pneumatic cylinder with constant tension - Sanding belt change with pneumatic belt relaxation in seconds - Adjustable belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for oversized workpieces - Workpiece transport via calibrated, non-slip, high-traction conveyor belts over heavy-duty, 1000 mm long cast tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece feed - Continuously variable feed gear motor for fast adaptation to various wood types - All motors electrically protected - Ergonomically arranged operating controls at the infeed side - Digital thickness display (0.1 mm resolution) with a modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Belt length: 1800 mm - Belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Brush sanding units Disc D=max. 200 mm Roller D=max. 270 mm - Extraction connections: 2 x 120 mm and 2 x 180 mm - Pneumatic connection: 6 bar - Working height: 870 mm External dimensions: - Length: 2600 mm - Length with rollers: 2985 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant ----- Price of the above-mentioned machine upon request! Kdsdpfx Ajyrty Hsauek ----- Optional accessories at an extra charge: Workpiece air blow-off - medium...

Būklė: geras (naudotas), WEINIG Quattromat Four-Sided Planer Maximum planing width: 220 mm Maximum planing height: 120 mm Kdedpov Hqn Tefx Aaujk 4 cutter heads, complete with heads included Lower spindle - 4 kW; right and left spindles - 7.5 kW each; top spindle - 5.5 kW Feed on cardan shafts with infinitely variable speed control Electric height adjustment (up/down) Electric planing width adjustment Branded machine, well maintained and in good condition

Būklė: labai geros būklės (naudotas), Four-sided planer Weinig Kdjdpfx Aerigxysausk - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition