Stahl 2,1 M Regal Hoehe 2,17 M pirkti naudotą (75 536)

Gamybos metai: 1976, būklė: naudotas, mašinos/transporto priemonės numeris: TH20010161, Demag Overhead Crane / Crane Ceiling System / Crane Runway / Indoor Crane Rated load / maximum lifting capacity: 10t (10,000 kg), span: 11,750 mm External dimension with end carriages approx. 12,000 mm With steel hoist and pendant control Lsdpfxev A Sa Nj Akvohh Overall height from crane top edge to hook approx. 900 mm End carriage length with buffers approx. 3,500 mm Hoisting height (wire rope hoist): 10,000 mm Crane weight approx. 4,000 kg Includes 2x 25m running rails HEB280, includes conductor rails!!! Girder lengths per side: 1x approx. 10m 1x approx. 15m Support spacing: 10m / 10 + 5m Crane is dismantled and available immediately at location 75053 Gondelsheim Used condition ----- Column slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder possible – please inquire with your postcode Collection preferred

Gamybos metai: 1970, būklė: naudotas, mašinos/transporto priemonės numeris: TH20010142, Demag Overhead Crane Kranhimmel Crane Runway Hall Crane Rated load / Lifting capacity max 10t - 10,000 kg, span 11,750 mm External dimension with end carriage approx. 12,000 mm Equipped with steel hoist with ground control pendant Overall height (top of crane to hook) approx. 900 mm End carriage length with buffer approx. 3,500 mm Lifting height (wire rope hoist) 10,000 mm Crane weight approx. 4,000 kg Including 2x 25m running rails HEB280, including conductor rails! Lhsdpfsv A Rxkox Akvsh Beam lengths per side: 1x approx. 10 m 1x approx. 15 m Support spacing 10m/10+5m Crane is dismantled, immediately available ex location 75053 Gondelsheim Used condition ----- Column-mounted slewing cranes and wall-mounted slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight carrier possible, please inquire with postcode Collection preferred

Gamybos metai: 2006, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: MBUT133-767, Steel Single-Girder Overhead Crane Bridge Crane Crane Runway Indoor Crane Gantry Crane Width approx. 8.3 m – Length approx. 11 m, Load capacity 500 kg Gauge can be adjusted, end carriages (125 cm) are bolted with 8 screws. Incl. approx. 2x 11 m running rails IPE 300 (cut in the middle) Incl. conductor rail for power supply via crane runway power collector Travelling mechanisms can also be adjusted/modified to fit a different girder width. Incl. complete control system, ground operation via pendant control The crane can be electrically traversed in all 3 axes Lifting height/hook path approx. 4 m Connection at 400V 16A, year of manufacture approx. 2006 Lsdpfjty Sx Rex Akvehh Very good condition, system was used for maintenance only – hardly used Shipping via freight carrier, collection preferred Location: 75053 Gondelsheim Please inquire for shipping rates based on postal code, we will immediately provide you with a non-binding offer!

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. Lodpfx Akofdkb Tjvohh The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation Lhodpfxsd Tbbdo Akvoh - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with foot section, usable depth 1,200 mm - 27 cantilever arms with a usable depth of 1,200 mm, equipped with deflectors - 9 roof supports with a projection of 1,500 mm, pre-drilled for customer-supplied roof construction (*Excludes timber purlins and trapezoidal sheets for roof construction) - Includes longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts re-orderable and extension possible at any time) - (*Available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components’ surfaces are hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (max. snow load 1.85 kN/m², wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (max. snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, 1,200 mm deep, with deflectors = 4 storage levels above each other - Including longitudinal and diagonal bracing with 1,500 mm axle spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load labels C4 in accordance with DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight service with advance delivery notification. Material is packaged for ease of unloading. The foundation must be concrete, level, suitable for doweling, and capable of bearing all imposed loads. Floor conditions and load-bearing capacity as well as any necessary official permits are to be checked and ensured by the customer. Lhedpeh R Taqofx Akvoh The uprights must be anchored to the floor by the customer; wall anchoring is neither required nor recommended. According to trade association guidelines, uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included Lhedpfjd Tqaljx Akvsh - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany Lhodpfoguk A Hjx Akvsh - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany Lhedpefdkb Uefx Akveh - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Scope of Delivery: - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) Lsdemhhy Nopfx Akvshh - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany Ledpfx Akjfdkbhsvjhh - Short delivery times - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard Lhsdpfx Akoguk Dkevsh - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) Lhsdpsguk Dvsfx Akveh - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, LENKIAMOJI MAŠINA STAHL TI 40/43 COMBI Metai: 2005/2002 Lhjdpfxoy R Sv So Akvoh būklė kaip nauja

Būklė: geras (naudotas), Tvirtinimo kubas: sunki versija, 4 vnt -Ilgis: 500 mm -Medžiaga: plienas -Parduodama/kaina: pilnas komplektas -Matmenys: kiekvienas 500/120/H160 mm -Transportavimo matmenys: 500/480/H160 mm -Svoris: 207 kg Ljdoyuu Uwspfx Akvshh

Gamybos metai: 1991, būklė: geras (naudotas), mašinos/transporto priemonės numeris: RS100/9 + RS101-6, Technical Data: 1 Zasche / Demag GSX250-3/3.25 Column-Mounted Slewing Crane, SWL 250 KG Payload at full outreach: 250 KG / 0.25 t SWL Height: approx. 3.45 m, underside of jib: approx. 3.25 m Outreach: approx. 3 m, hook height: approx. 2.85 m Total weight: approx. 500 kg including base plate 75x75 cm Equipped with Demag chain hoist, 250 kg lifting capacity Connection: 400V 16A, slewing range: 270° Inspection book available Crane is dismantled and available immediately Lsdpfxevzkzpo Akvjhh Item location: 75053 Gondelsheim, Germany Only the crane system shown in the pictures is for sale Used condition, see photos Shipping by freight carrier or collection by appointment

Būklė: paruoštas naudoti (naudotas), sujungimo modulis Lsdpfxsd Hvznj Akvjhh

Gamybos metai: 1989, būklė: naudotas,

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2021, portalinis kranas 2x35 t, 25 arba 28 metrų tarpatramis Ledpfx Akoggggpsvehh

Būklė: geras (naudotas), Clamping plate, welding table, straightening plate Lhodoft Tciopfx Akvjh - Clamping plate: steel, with vise - Width: 1500 mm - Length: 2005 mm - Height: 845 mm - Plate thickness: 45 mm - Plate: mounted on steel frame - Vise: clamping jaws 110 x 15 mm - Transport dimensions: 1525/2230/H990 mm - Weight: 1250 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: EAN0729389556525, keliamoji galia: 9 000 kg, bendras ilgis: 17 000 mm, apkrova vienai santvarų porai (maks.): 3 000 kg, lentynų eilučių skaičius: 2, rėmo aukštis: 3 500 mm, rėmo plotis: 1 100 mm, lentynos aukštis: 3 500 mm, lentyna ilgis: 8 500 mm, atrama ilgis: 2 700 mm, 2 rows of pallet racks (4 x M35112711-3) Each 8.5 m long, 3.5 m high, 1.1 m deep Each with 3 bays, 2.7 m wide Each with 3 beam levels, compartment load 3,000 kg Scope of delivery: - 8 frames (RM3511 - RAL5019) - 16 base plates, shims, fastening material - 32 floor anchors (ZZBA1210) - 36 individual beams (T27114 - RAL2008) - 4 impact protection guards / collision guards (ZRS40901) - 2 load capacity signs (BSMcP) Ledpfx Akov Ungcjvshh Frames are bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - free delivery to the construction / installation site - Unloading from the truck is to be carried out by the buyer with their own lifting equipment - Delivery throughout the entire territory of the Federal Republic of Germany, except islands! Deliveries to EU countries by individual agreement.

Būklė: naudotas, Vieno lapo padavėjas Stahl Solo M2222 Metai: 1985 - Serijos Nr. 29327/85 Solo padavėjas / Vienlapis padavėjas Požeminis siurbimo padavėjas / Non-Stop padavėjas Ledew I Smqjpfx Akvehh Internetinė video apžiūra per WhatsApp - MS Zoom - Telegram Sandėlyje Emskirchen/Nürnberg - Prieinama nedelsiant - Galima išbandyti

Būklė: naudotas, mašinos/transporto priemonės numeris: 45208, Marking devices for folding machine – Marking Device for Folding Machine Stahl MKE 86, Serial-No. 29903/86 - 115148 Online video inspection possible via Skype video call. Lhjdpeh Ax Rbofx Akvsh We would be pleased to welcome your visit – more machines available in stock. Available immediately – Inspection possible. Location: Emskirchen / Nuremberg – Test run possible on site.

Būklė: naudotas, Gamybos metai: 1986, mašinos/transporto priemonės numeris: 29903, Marking device for folding machine - Marking Device for Folding Machine Stahl MKE 86, year 1986 - serial no. 29903/86 - 115148 Maximum working width: 860 mm with marking unit Online video inspection via Skype video possible We would be pleased to welcome your visit - More machines in stock Immediately available - Can be inspected Lodoh Ax Rfjpfx Akvohh In stock in Emskirchen / Nuremberg - Test run possible

Būklė: geras (naudotas), Plokščioji diržo skriemulys, dantytas skriemulys, daugiadiržinis skriemulys, dantytos diržo skriemulys -Dantytos diržo skriemulys: Ø 192 mm -Tipas: D TB 64-8M-50 Lhodjx Slcbjpfx Akveh -Medžiaga: plienas -Dantų kiekis: 64 dantys / diržo plotis 50 mm -Tvirtinimas: Taperinės įvorės optibelt 2517-40 Ø 40 x 44,5 mm -Kiekis: 2 vnt. dantytų diržo skriemulių -Kaina: už vienetą -Matmenys: Ø 168 x 60 mm -Svoris: 6,8 kg/vnt.