Kombinuotas Kopijavimo Aparatas, 4 Modelis pirkti naudotą (70 724)

Būklė: geras (naudotas), 4 x Bonfiglioli wind turbine gearboxes JB00001227 SN B6201603697 Klodpfx Ajwg E Utsldju

Būklė: labai geros būklės (naudotas), Gamybos metai: 1994, Four-sided planer, 8-head HARBS. Kledpol Dw Nxsfx Aldou Long infeed table: 3 meters. Machine weight: 5,500 kg. Cardan drive. Head configuration: bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal, top horizontal. Motors: 5.5 kW and 7.5 kW. Planing width: 230 mm. Planing height: 160 mm.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, 1. WEISHAUPT WM-G10/4-A (su dujų kolektoriumi) - Galia: 100-1100 kW - Modifikacija: ZM-LN - Pagaminimo metai: 2020 2. WEISHAUPT WM-G10/3-A (su dujų kolektoriumi) - Galia: 100-1000 kW - Modifikacija: ZM - Pagaminimo metai: 2015 (1 vnt.), 2013 (yra 2 vnt.) 3. WEISHAUPT WM-G10/2-A Modifikacija: ZM-LN Galia: 75-630 kW Pagaminimo metai: 2021 Kjdpjwgyrtofx Aldjlu 4. WEISHAUPT WM-G10/3-A (su dujų kolektoriumi) - Galia: 125-900 kW - Modifikacija: ZM-LN - Pagaminimo metai: 2011 5. WEISHAUPT WM-G10/3-A (su dujų kolektoriumi) - Galia: 100-1000 kW - Modifikacija: ZM - Pagaminimo metai: 2011 6. WEISHAUPT WM-G10/3-A (su dujų kolektoriumi) - Galia: 100-1000 kW - Modifikacija: ZM - Pagaminimo metai: 2009

Būklė: labai geros būklės (naudotas), Gamybos metai: 2025, Format 4 Kappa 450 x-Motion 2 ašių valdymas, aukštis ir pasukimas Techniniai duomenys: - Pjovimo ilgis: 2800 mm - Pjovimo plotis: 1300 mm Kjdpjy Rp D Tsfx Aldelu - Pjovimo aukštis: 155 mm - Didžiausias pjūklo diskas Ø: 450 mm - X-motion valdymas - Kampų tinklelis su ilgio kompensacija - Ištraukimo jungtis: Ø 120 mm - Variklio galia: 10 kW - Pagaminimo metai: 2025 Dvigubas kampinis liniuotė

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1996, Universal Tool Milling Machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital readout Year of manufacture: 1996 Travel distances: X 400 Y 320 Z 400 mm Speed range: 40 – 2550 rpm Including the following accessories: Rigid angle table, 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, and Z axes Hydraulic tool clamping Kljdpfx Aljq Ulucjdju Automatic central lubrication pump for X, Y, and Z axes Machine lamp 4 machine feet Coolant unit Operating manual THE MACHINE WAS USED EXCLUSIVELY FOR APPRENTICE TRAINING!! THE MACHINE IS IN GOOD CONDITION!!

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2013, veikimo valandos: 42 000 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 3 315 kg, bendras ilgis: 3 200 mm, bendras plotis: 1 630 mm, bendras aukštis: 1 960 mm, variklių gamintojas: Siemens, galia: 236 kW (320,87 AG), tūrio srautas: 3 013 m³/val, darbinis slėgis: 4 juosta, triukšmo lygis: 77 dB, aušinimo tipas: vanduo, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, 1 unit low pressure screw compressor Manufacturer: Atlas Copco Model: ZE 4 VSD Year of manufacture: 2013 Volume flow: 3013 m³/h (50.2 m³/min) Operating pressure: 4 bar Operating hours: approx. 42,000 hours Shaft power: 225 kW Drive power: 236 kW Discharge temperature with aftercooler: 40°C Discharge temperature without aftercooler: 244°C Compressor speed: 3630 rpm Speed control: with integrated frequency converter Cooling: water cooling with FUNKE stainless steel shell-and-tube heat exchanger 1.4571 Electric motor: Siemens 1LG6 316-4ZZ91-Z Dimensions Length: 3200 mm Width: 1630 mm Height: 1960 mm Klodpfxeywr Tke Aldju Weight: 3315 kg Also available: Cyclone afterseparator Manufacturer: BZ Zyklone Model: 175 (stainless steel) Condensate drain: Bekomat Shell-and-tube heat exchanger Manufacturer: Funke Model: A100 805-6-1Way Material: stainless steel 2x rubber compensator 1x intermediate flange valve DN 150 with AUMA actuator SG 05.1 F07 1x cooling water control valve Samson 3274 DN 50 PN 16 1x steel pipeline DN 150 with 2x 90° bends

Būklė: naujas, Gamybos metai: 2025, Tout inox Mélangeur Tumbler – livraison rapide d’une machine Fabrication neuve sur commande Cuve en acier inoxydable de haute qualité, inox 316 Vitesse de rotation variable de 0 à 24 tr/min Déchargement par basculement électrique Capacité de 50 kg à 90 kg selon le type de produit Kljdpfx Aloif Upfsdeu 2 modèles disponibles

Būklė: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Kaina taikoma visam komplektui kartu. Puikiai tinka pradėti šilkografijos veiklą, menininkų studijai, menininkams. Rinkinį sudaro: 1. ŠILKOGRAFIJOS KARUSELĖ, X 4 STALAI, PILNAI REGULIUOJAMA 2. DŽIOVINTUVAS: 3 FAZIŲ MAITINIMAS Klodpfx Aexwnw Aoldsu 3. AUTOMATINIS FLASH DŽIOVINTUVAS: 3 FAZIŲ MAITINIMAS VISKAS NAUJA, IŠPAKUOTA IŠ DĖŽIŲ.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: EAN0729389556525, keliamoji galia: 9 000 kg, keliamoji galia vienai sandėliavimo sekcijai: 3 000 kg, bendras ilgis: 34 000 mm, bendras aukštis: 4 500 mm, apkrova vienai santvarų porai (maks.): 3 000 kg, lentynų eilučių skaičius: 4, rėmo aukštis: 4 500 mm, padėklų vietos: 144 euro padėklai, rėmo plotis: 1 100 mm, lentynos aukštis: 4 500 mm, lentyna ilgis: 34 000 mm, atrama ilgis: 2 700 mm, 4 eilių padėklų lentynų (4 x M45112711-2) kiekviena po 8,5 m ilgio, 4,5 m aukščio, 1,1 m gylio, kiekvienoje po 3 sekcijas, 2,7 m pločio, kiekvienoje po 3 lentynų lygius, lentynos apkrova – 3000 kg. - 16 rėmų (RM4511 - RAL5019) - 32 pagrindo plokštės, paklotas, tvirtinimo medžiagos - 64 grindų inkarai (ZZBA1210) - 72 individualios sijos (T27114 - RAL2008) - 4 apkrovos ženklai (BSMcP) Rėmai sujungti varžtais, nesurinkti. Transportavimas / pristatymas: - iki 20 darbo dienų nuo apmokėjimo gavimo - pristatymas į statybų vietą / montavimo vietą - Iškrovimą iš sunkvežimio atlieka pirkėjas savo krautuvu. - Pristatymas visoje Vokietijos teritorijoje (išskyrus salas!). - Pristatymas į ES šalis pagal individualų susitarimą. Kljdpfx Aley R R R Iedou

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Siūlome 4 vnt. Schlick turbinas – 320 mm, komplekte su 7,5 kW varikliais. Ksdpfsvphf Usx Aldolu Turbinos iš – Schlick ROTO-JET RB500 5.2/4/7,5 Turbinos tipas – 5.2 Abrazyvo kiekis – 140 kg/min. Abrazyvo išeigos greitis – 70 m/s. Turbinos po kapitalinio remonto, naudotos originalios atsarginės dalys. Šratavimo turbina, šratavimo įranga, smėliavimo aparatas. KAINA UŽ 1 vnt. – 3 000 Eur.

Būklė: naudotas, Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, galia: 10 kW (13,60 AG), įėjimo įtampa: 400 V, X ašies eiga: 4 050 mm, Y ašies eiga: 2 560 mm, Z ašies eigos atstumas: 280 mm, ruošinio ilgis (maks.): 3 120 mm, ruošinio plotis (maks.): 2 160 mm, ruošinio aukštis (maks.): 105 mm, ašių skaičius: 4, įrankių magazino lizdų skaičius: 16, Įranga: CE žymėjimas, For sale is a well-equipped CNC machining center, FORMAT-4 profit H10 22.32, manufactured in 2015. This machine is ideally suited for precise machining of wood, MDF, plastics, and panel materials. Kedey Smi Aepfx Aldolu The FORMAT-4 H10 stands out due to its high traverse speeds and robust construction. Highlights include a powerful 10 kW HSK-F63 spindle, a 360° C-axis, and a total of 16 tool positions. Technical Data * Manufacturer: FORMAT-4 * Model: profit H10 22.32 * Year of manufacture: 2015 * Machine type: CNC machining center Working Area * X-axis: 3,120 mm * Y-axis: 2,160 mm * Z-axis: 105 mm Traverse Paths * X: 4,050 mm * Y: 2,560 mm * Z: 280 mm Traverse Speed * X/Y: 100 m/min * Z: 30 m/min Spindle * 10 kW HSK-F63 spindle * Speed range 1,000 – 24,000 rpm * Clockwise/counterclockwise rotation * Ceramic bearings * Air-cooled Tool Changer * 2 tool changers with a total of 16 tool positions * HSK-F63 interface * Tool positions located in machine column and on the side Additional Units * C-axis 0–360° Vacuum / Table * Matrix/grid table * 2 vacuum pumps, each 250 m³/h * Two fence rows Control / Software * FORMAT-4 H10 control * WoodFlash software * DXF import * 3D graphic display * Parametric programming * Tool database for up to 500 tools * Mobile control panel * Handheld terminal Additional Equipment * Automatic central lubrication * UPS for control computer * Network/internet preparation * Central extraction system * Preparation for boring head * Operating tools and documentation included Condition: Machine from ongoing production. Well-maintained condition. Inspection possible by appointment.

Būklė: labai geros būklės (naudotas), • Gamintojas: ABUS KG – Vokietija • Tipas: K-300 1-4 • Variklio galia: 3,8 kW • Maitinimas: 400 V / 50 Hz • Įrengtas elektromagnetinis stabdis – stabdymo momentas 90 Nm • Dantytas velenas – skersmuo apie 34 mm • Tvirtinimas: kvadratinis flanšas • Tvirta pramoninė konstrukcija, skirta naudoti ABUS tiltinėse kranose ir keltuvuose • Būklė: naudotas, veikiantis (tikros nuotraukos) Klsdpjxbfutsfx Aldeu

Būklė: naudotas, Kinų keturgalvė pildymo mašina su nukreipimo sistema ir lietimui jautriais valdikliais. Vožtuvai tinkami karštam pildymui. Anksčiau naudota 500 ml sirupo produktui pildyti, galimas diapazonas – 250–1000 ml. Elektros reikalavimai – 240V / 50Hz / 1 fazė. Juostos plotis – 82 mm. Kljdpfx Aeza T I Heldeu Bendri matmenys – 2100 mm ilgis x 1030 mm plotis x 1950 mm aukštis. Būtina įrengti apsaugas, kad atitiktų CE reikalavimus.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: NR: 220.10.029.19, Funkcionalumas: visiškai funkcionalus, galia: 15 kW (20,39 AG), įėjimo įtampa: 400 V, įėjimo srovė: 28 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, ruošinio aukštis (maks.): 60 mm, Įranga: CE žymėjimas, dokumentacija / vadovas, Aukštos kokybės Format4 Tempora 60.06 EL briaunų klijavimo staklės parduodamos – paruoštos darbui! Pakelkite savo gamybą į aukštesnį lygį su šiek tiek naudotomis Format4 Tempora 60.06 EL briaunų klijavimo staklėmis, kurios yra puikios būklės. Sukurtos pramoniniam darbui, šios staklės užtikrina didžiausią tikslumą ir nepriekaištingus paviršius kiekvienai plokštei. Aukšto tikslumo automatinis briaunų klijavimas Priešfrezuojantis agregatas tobulam briaunos paruošimui Patikima, stabili klijavimo sistema Pilnas apdirbimas: apipjovimas, frezavimas, poliravimas Paprastas valdymas ir patikimas našumas Papildoma komplektacija: Raudonas oro bakas (kaip matyti nuotraukose) Papildomas pašildomas klijų katilas – idealus greitam skirtingų spalvų klijų keitimui Rūpestingai prižiūrėtos, mažai naudotos ir visiškai veikiantys įrenginiai – paruoštos nedelsiant naudoti gamyboje. Ksdpfxjy Dg N To Aldelu Staklės parduodamos dėl gamyklos pertvarkymo. Susisiekite dėl daugiau informacijos ar apžiūros.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, galia: 2 kW (2,72 AG), pildymo angos plotis: 1 250 mm, pildymo angos ilgis: 1 000 mm, bendras svoris: 1 300 kg, Techniniai duomenys: Piltuvo anga: ilgis x plotis 1250 x 1000 mm Ilgis x plotis 1250 x 1000 mm Pjovimo mechanizmo anga: 562 x 462 mm Padavimo anga: 1250 x 1000 mm Ilgis x plotis 562 x 462 mm Velenų skaičius: 4 vnt. Klsdpfx Aloyma Tisdsu iš jų: pjovimo velenai 2 vnt. valymo velenai 2 vnt. Pjovimo diskų skaičius: 23 Velenų apsukos: 25 aps./min.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg Kledpfxsfdkb Ts Aldsu - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) Kjdpfxsd Tbbdo Aldelu - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level. Kljdpfjd Tqaljx Aldsu

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. Kedpfxsfdkb Uj Aldelu We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) Kljdeguk A Hspfx Aldeu - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. Kledpfx Ajfdkbholdsu When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Kedpfxsguk Dke Aldjlu Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation Klsdpfxsguk Dve Aldsu - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Gamybos metai: 1980, būklė: naudotas, Ostrzałka VOLLMER FINZ 4-800 Lokalizacja: Gorzów Wielkopolski Warunki dostawy: Odbiór własny Kjdpfx Aecw Dg Dsldjlu Koszt dostawy: Pokrywa klient Sposób uruchomienia: Do uzgodnienia Opis: Uwagi: AUTOMATYCZNA SZLIFIERKA DO TARCZ WIDIOWYCH (HM) – HYDRAULICZNA

Gamybos metai: 1999, būklė: labai geros būklės (naudotas), Siūlome Heizbosch dujinį katilą (gamtinės dujos).\nTipas: LLR 4000\nKatilas, kurio galia 4 MW\nPagaminimo metai: 1999\nDarbinė temperatūra: maks. 120 °C, slėgis: maks. 6 bar\nVandens talpa: 5720 l\nNaudotas labai retai, tik gretimų dviejų biomasės katilų valymui. Klsdpfxoxxa Ivj Aldeu