Fortuna A 4 pirkti naudotą (105 435)

Būklė: geras (naudotas), STAHL T36/4 + peilis Lankstymo mašina farmacijos pramonei Pagaminta Vokietijoje. Aukščiausios klasės pasaulyje lankstymo mašina. Mašina paruošta gamybai. Sklandus padavimo ir lankstymo greičio reguliavimas. 4 kasečių modulis + kryžminis peilis + iškrovimas. Giluminis padavimas (aukštos krūvos pakėlimas) Ši mašina idealiai tinka farmaciniams lankstinukams lankstyti dėl mažo lanksčio ir didelio kasečių skaičiaus. Kasečių garso izoliacija. Elektroninis skaitiklis su partijų funkcija ir reguliuojamu laiku tarp partijų. Techninės specifikacijos: Maks. dydis: 360x550mm Min. dydis: 80x100mm Svoris: 450kg Maitinimas: 380V Nodsywdnyepfx Acpjcr

Būklė: geras (naudotas), Heidelberg Stahlfolder Ti 52 4/4/1 lankstymo mašina Mašina sukonfigūruota lankstyti iki 16 puslapių. Techninės specifikacijos: Minimalus popieriaus dydis: 105 x 150 mm Maksimalus popieriaus dydis: 520 x 840 mm Didelio kupolo arba aukšto padavimo krautuvas Konfigūracija: – 4 kasetės pirmame modulyje Ti-52 – 4 kasetės antrame modulyje 2.Ti-52 – 1 elektroninis peilis – Mobilus išdavimo stalas Inverteriu valdoma lankstymo greičio reguliavimo sistema Kasetės triukšmo slopinimas Becker kompresorius Dvigubo lapo sensorius Elektroninis skaitiklis su partijų nustatymu Elektrinis išdavimo stalas su reguliuojamu išdavimo greičiu Pridedami atsarginės dalys, įrankiai ir dokumentacija Nsdpfjywdmcex Acpscr Mašina gero techninio stovio, paruošta darbui.

Būklė: labai geros būklės (naudotas), Parduodamas žinomo gamintojo Grundfos pramoninis siurblys. Modelis SPK 4-8 – vertikalus daugiapakopis siurblys, skirtas švariems skysčiams, aušinimo skysčiui, pramoninėms instaliacijoms ir CNC staklėms. Techniniai duomenys: Gamintojas: Grundfos Ncodpfxoywpahs Acper Modelis: SPK 4-8 A-A-A Galia: 0,55 kW Apsisukimai: 2850 aps./min Našumas: apie 3 m³/val. Pakėlimo aukštis: iki 28 m Skysčio temperatūra: maks. 90°C Gamybos šalis: Danija Būklė: Naudotas, veikiantis. Matomi naudojimo požymiai (nutrynimai, nedideli korozijos ženklai – žr. nuotraukas). Ant korpuso prie jungties matomas įtrūkimas – veikimui įtakos neturi (patikrinti pirkėjui).

Būklė: labai geros būklės (naudotas), Parduodamas Kaltenbach Maschinenfabrik elektrinis variklis Kaina nurodyta už 1 vnt. Naudotas, veikiantis Variklis patikrintas prietaisu Matomi normalūs naudojimo ir sandėliavimo žymės Nsdpfxjyv Uvxs Acpecr Techniniai duomenys Gamintojas: Kaltenbach Maschinenfabrik Tipas: DKV 112M 238 4 Trifazis variklis Galia: 1,7 / 2,6 kW Įtampa: 400 V 50 Hz Apsaugos klasė: IP54 Izoliacijos klasė: F Sukimosi greitis 700 / 1415 aps./min Daugiagreitis Dahlander variklis Veleno skersmuo apie 28 mm

Būklė: geras (naudotas), Heidelberg Stahlfolder Ti 52 4/4 lankstymo mašina Mašina labai geros būklės, paruošta darbui. Techninės specifikacijos: Minimalus popieriaus dydis: 105 x 150 mm Maksimalus popieriaus dydis: 520 x 840 mm Aukšto padėjimo padavimas (High stack feeding) Konfigūracija: – 4 kasetės ant pirmo Ti-52 modulio – 4 kasetės ant antro 2.Ti-52 modulio – Mobilus išvedimas Kintamo greičio lankstymo valdymas per inverterį Kasetės triukšmo mažinimas Pridedamas kompresorius Dvigubo lapo jutiklis Elektroninis skaitiklis su rūšiavimo funkcija Ncsdpfeyur Izox Acpor Elektrinis išvedimas su reguliuojamu greičiu Atsarginės dalys, įrankiai ir dokumentacija įtraukti Pagaminta Vokietijoje.

Būklė: labai geros būklės (naudotas), Edgebander FORMAT 4 Tempora 60.06 glueBox – used - Touchscreen - Swivelling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Diamond jointing cutters for both climb and counter rotation - Glue pot located underneath - Quick-change system for glue pot - Compatible with PUR adhesives - GLUEBOX system - Pressure unit with driven roller - End trimming unit with 2 HF motors - Pneumatically swivelling end trimming unit - Flush / radius trimming unit - Motorised position control of trimming unit - x-motion PLUS - Corner copying unit with diamond-tipped cutter - Radius scraper - Radius scraper with motorised positioning - Surface scraper - Surface scraper with usage-based operation - Entry lock - Spray device for release agent - Spray device for lubricant - Spray device for cleaning agent - Year of manufacture: 2022 ----- Technical Data ----- Edge thickness (coil material): 0.4 – 3 mm Edge thickness (strip material): 3 – 6 mm Workpiece thickness: 8 – 60 mm Nsdpfxeu R S Nwo Acpecr Min. workpiece length: 140 mm Feed speed: 10 m/min Screen size: 15 inches Jointing cutter dimensions: D 80 x 64 mm Jointing cutter motor power: 1.1 kW End trimming motor power: 0.35 kW Trimming station power: 0.75 kW Extraction connection diameter: 80 + 160 mm Compressed air connection: 7 – 10 bar Total length: 4,872 mm Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm Weight: 1,500 kg Quality Information: - All settings checked - Calibrated as per manufacturer specifications - Complete basic inspection - Complete basic cleaning - Electricals checked - Pneumatics checked - Immediately ready for use

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, Sertifikuota DGUV iki: 05/2027, įvesties srovės tipas: trifazis, paskutinio kapitalinio remonto metai: 2024, Tešlos dalijimo ir formavimo mašina Fortuna bandelių spaudė Gr. 3 Pusiau automatinė, 30 dalių Geriausiems rezultatams! Galinga ir patvari technika Jungtis: 400V, 16A-CEE kištukas Matmenys: 580 x 580 x 1350 mm (PlxGxA) Naudota, išvalyta mašina Kokybė iš specializuotos dirbtuvės! Pasinaudokite daugiau nei 35 metų patirtimi! Ncsdpow Tthmofx Acpjr Pasirinkimai: Nerūdijančio plieno pakyla Nauja formavimo lėkštė Aptarnavimo paketas Priežiūros sutartis Apiešimas ir paleidimas Pristatymo paslauga Apsilankykite mūsų kepyklos įrangos parodoje!

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Tešlos dalijimo ir formavimo mašina TOP Fortuna bandelių presas Gr. 3 Pusiau automatinė, 30 dalių Dalijimo galva NAUJA perparduota Nedpfx Acsw Hn H Eopjcr Nauji nerūdijančio plieno peiliai 400V, 16A-CEE kištukas Išmatavimai: 580 x 580 x 1350 mm (P x I x A) Atnaujinta naudota mašina Su garantija ir atsarginių dalių aptarnavimu Papildomai: Nerūdijančio plieno platforma Nauja formavimo lėkštė Serviso paketas Priežiūros sutartis Instruktažas ir paleidimas Pristatymo paslauga Išbandykite mūsų išskirtinį aptarnavimą Jums!

Būklė: labai geros būklės (naudotas), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. Ncedpfx Aceyga T Nspjr The machine is designed for beading, edge folding, and creating embossments (beads) on sheet metal edges. The solid, heavy cast iron construction ensures stable and precise operation. The open "C"-type frame allows for the processing of large sheets and long components. An electric drive with a large flywheel guarantees smooth operation and adequate torque for sheet metal forming. The pressure and guidance of the rollers are mechanically adjustable. Nameplate data: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² This machine is not a shear – it does not cut sheet metal, but is intended solely for shaping. Condition: used, complete, with visible signs of wear appropriate to its age. Ideal for metalworking shops, toolrooms, maintenance departments, as well as for restoration work, single-unit or small-batch production.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: NR: 220.10.029.19, Funkcionalumas: visiškai funkcionalus, galia: 15 kW (20,39 AG), įėjimo įtampa: 400 V, įėjimo srovė: 28 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, ruošinio aukštis (maks.): 60 mm, Įranga: CE žymėjimas, dokumentacija / vadovas, Aukštos kokybės Format4 Tempora 60.06 EL briaunų klijavimo staklės parduodamos – paruoštos darbui! Pakelkite savo gamybą į aukštesnį lygį su šiek tiek naudotomis Format4 Tempora 60.06 EL briaunų klijavimo staklėmis, kurios yra puikios būklės. Sukurtos pramoniniam darbui, šios staklės užtikrina didžiausią tikslumą ir nepriekaištingus paviršius kiekvienai plokštei. Aukšto tikslumo automatinis briaunų klijavimas Priešfrezuojantis agregatas tobulam briaunos paruošimui Patikima, stabili klijavimo sistema Ncodpoy Dg N Tjfx Acpjr Pilnas apdirbimas: apipjovimas, frezavimas, poliravimas Paprastas valdymas ir patikimas našumas Papildoma komplektacija: Raudonas oro bakas (kaip matyti nuotraukose) Papildomas pašildomas klijų katilas – idealus greitam skirtingų spalvų klijų keitimui Rūpestingai prižiūrėtos, mažai naudotos ir visiškai veikiantys įrenginiai – paruoštos nedelsiant naudoti gamyboje. Staklės parduodamos dėl gamyklos pertvarkymo. Susisiekite dėl daugiau informacijos ar apžiūros.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, Allgemeine Beschreibung Zum Verkauf stehen 6 Stück Hydraulikpressen, Modell YL32-200, robuste Vier-Säulen-Bauweise, ideal für Metallumformung, Pressarbeiten, Stanzen, Biegen und allgemeine Industrieanwendungen. Die Maschinen wurden ursprünglich aus China importiert und basieren auf dem weit verbreiteten Y32-Serienstandard, was eine einfache Wartung und weltweite Verfügbarkeit von Ersatzteilen gewährleistet. ⸻ ⚙️ Technische Daten (typisch für YL32-200) * Presskraft: ca. 200 Tonnen * Bauart: 4-Säulen-Hydraulikpresse * Hub: ca. 400 – 700 mm * Tischgröße: ca. 700 x 700 mm – 1000 x 1000 mm * Lichtöffnung (Öffnungshöhe): ca. 800 – 1200 mm * Hydraulikdruck: bis zu 25 MPa * Motorleistung: ca. 7,5 – 15 kW * Steuerung: manuell / halbautomatisch * Stromversorgung: 380V / 50Hz (industriestandard) * Gewicht je Maschine: ca. 5 – 8 Tonnen ⸻ 🏭 Anwendungsgebiete * Metallumformung & Stanzen * Tiefziehen * Richten und Pressen * Kunststoffverarbeitung * Werkstatt- und Serienfertigung ⸻ 📦 Zustand * Gebrauchtzustand * Verkauf wie gesehen / ab Standort * Besichtigung nach Vereinbarung möglich ⸻ 📊 Verfügbarkeit * Menge: 6 Maschinen verfügbar * Einzelverkauf oder als Paket möglich Ncsdpfx Ajy E Abnocper ⸻ 🚛 Logistik * Standort: Deutschland * Verladung möglich (je nach Aufstellung Stapler/Kran erforderlich) * Internationaler Versand kann organisiert werden Preis pro Stück!!!! Demontage durch Käufer!!! Oder gegen Aufpreis organisiert!!!

Būklė: geras (naudotas), Šlifavimo skersmuo: 450 mm Šlifavimo ilgis: 600 mm Centru aukštis: 140 mm Detalės skersmuo: 280 mm Veleno greitis: 63–400 aps./min Šlifavimo disko greitis: 20–35 m/s Užimamas plotas: apie 2,4 x 1,9 x 2,1 m Ši apvalioji šlifavimo staklė yra geros būklės, iš karto prieinama ir galima apžiūrėti sujungus prie elektros pas tiekėją. APRAŠYMAS: - Vidaus šlifavimo įrenginys - Aušinimo skysčio agregatas - Automatinės pastūmos Centru atstumas: - 430 mm su tvirtinimo įvore ir reguliuojama griebtuva - 600 mm iki kūgio tvirtinimo be griebtuvo Ncjdpfxsxcblqe Acpjr

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, bendras ilgis: 580 mm, bendras plotis: 580 mm, bendras aukštis: 1 350 mm, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, Sertifikuota DGUV iki: 05/2027, įvesties srovės tipas: trifazis, paskutinio kapitalinio remonto metai: 2026, Tešlos dalinimo ir formavimo mašina Fortuna bandelių presas, 3 dydžio Pusiau automatinė, 30 dalių Dalijimo galvutė NAUJAI atnaujinta Nedjw Hn H Sspfx Acpscr Nerūdijančio plieno peiliai NAUJI GERIAUSIAS modelis Patikima technologija Jungtis 400V, 16A-CEE kištukas Matmenys: 580 x 580 x 1350 mm (PlxGxA) Naudota mašina, perrenovuota ir SAB patikrinta su garantija Pasirinkimai: Nerūdijančio plieno pakyla Nauja formavimo plokštė Serviso paketas Priežiūros sutartis Instruktažas ir paleidimas Pristatymo paslauga Išbandykite mūsų išskirtinę paslaugą Jums!

Būklė: labai geros būklės (naudotas), Solid German-made industrial machine Walther Trowal, model DLT 4, year 1980. The device is designed for surface treatment of metal, aluminum, or plastic parts – trowalizing process (deburring, edge rounding, polishing, cleaning). Classic drum design – reliable, robust, and durable, typical for 'West Germany' manufacturing. Technical specifications: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Rotational speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Complete machine, drum rotates smoothly and evenly. • Perforation and interior in good condition. • No signs of cracks or structural damage. • Requires electrical connection and potentially a review. • Ideal for tool workshops, processing plants, or production lines. Ncodjxmlinjpfx Acpsr Applications: • Deburring and cleaning of parts after machining. • Polishing of metal or aluminum components. • Treatment of screws, bushings, stamped parts, castings, and precision components. Condition: used, robust, classic Walther Trowal design – suitable for light refurbishing or ready for immediate operation.

Būklė: naujas, keliamoji galia vienai konsolės svirčiai: 650 kg, lentynos aukštis: 4 000 mm, bendras ilgis: 4 000 mm, bendras plotis: 1 480 mm, apkrova vienai atramai: 1 950 kg, Data: - Height: approx. 400 cm - Depth: approx. 148 cm - Length: approx. 400 cm - Cantilever arms: approx. 120 cm, including 8 cm front stop - Axle spacing: 130 cm - BRAND NEW, available immediately from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights painted RAL7016. - Cantilever arms painted RAL3000. - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels in total) The uprights included in this racking set are pre-fabricated free of charge for possible conversion to double-sided use. Advantages of hook-in cantilever arms, see illustrations. Ncjdpfey D Sbnox Acpor Racking consists of: - 04 x uprights, including foot section, approx. 400 cm, made from IPE180. - 12 x cantilever arms, approx. 120 cm, made from 10 x 4 cm profile. - Includes all necessary connecting parts and bolts. Price: €1,995.00 net €2,374.05 gross You will receive an invoice showing VAT. Accessories such as floor anchors, impact protection, etc. are also available from us. Transport: Delivery can be arranged by our partner forwarding agent upon request. Shipping costs depend on the delivery postcode. Assembly: Our trained personnel are happy to assist you with the professional assembly and disassembly of your industrial equipment if required. Our recommendation: Let us know your requirements! We are happy to support you in realising your projects, from planning and ordering, right through to installation.

Būklė: naudotas, Gamybos metai: 2002, Keliamoji galia 10 / 20 (atskirai / komplekte) t Ruojinio gaminio skersmuo Ø250 - Ø4600 mm Nsdjwg Hpropfx Acpscr Ratų skersmuo 380 mm Pavaros rato greitis bepakopis 130–1300 mm/min Bendras galingumo poreikis 2x 0,75 kW Mašinos svoris apie 750 kg / 500 kg Plieniniai volai, skersmuo 380 mm Pasukamas volas su variklio reguliuojamais volais Dažninis volų pavaros reguliavimas pavaros pusėje

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing Ncodpfx Acjd Tbbdjper - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) Nedpfofdkb Tjx Acpecr - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Nsdod Tqalspfx Acpjcr Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany Nodpjfdkb Ujfx Acpjcr - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) Nodpjguk A Hsfx Acpscr - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times Njdpsfdkbhefx Acpecr - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) Nedpfxoguk Dks Acpjcr - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. Njdpfxoguk Dvs Acpscr The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Būklė: naudotas, Gamybos metai: 2016, Darbinis laukas: X=3300 mm Y=1280 mm Z=150 mm Praėjimo aukštis. Valdymo terminalas: 24" LED spalvotas ekranas. Rankinis terminalas ašių greičio valdymui. Programinė įranga: „Woodflash“. Vakuuminis siurblys 90 m³/val./50 Hz arba 108 m³/val./60 Hz. Frezavimo velenas 12 kW HSK F63 (12 000 aps./min.). 12 vietų linijinis įrankių keitiklis kairėje staklių pusėje + paėmimo vieta. Gręžimo galva DH 16 4H 2S: vertikaliai 12 velenų, horizontaliai 4 velenai, 2 griovelių pjūklai. Sandėlio vieta: Nattheim. Nodpjxy Tlwsfx Acpscr