Droop + Rein Fogs 40 60 C pirkti naudotą (79 399)

Būklė: naudotas, Carga útil: 0/60 kg Alcance del brazo: 1.96 m Número de ejes: 6 Repetibilidad: 0.06 mm Peso del robot: 1040 kg Montaje: en suelo Bjdpsihgprjfx An Heln

Būklė: naudotas, Gamybos metai: 1986, Pressure 40 t Bledpfoumm Sqex An Hjn Reach 265 mm Stroke 8 - 95 mm Table dimensions 660 x 520 mm Ram dimensions 400 x 250 mm Ram adjustment 80 mm Strokes per minute 70 - 142 spm Total power requirement kW Machine weight approx. 4,500 kg Space requirement approx. 1.245 x 1.585 x 2.37 m - Table clamping plate

Gamybos metai: 2002, būklė: geras (naudotas), Complete Desoutter screwdriving system consisting of: 1 x Transducer-controlled angle screwdriver Desoutter ERA40J Part no.: 6151650800 Torque range: 8 to 40 Nm Drive: 3/8" Speed: 900 rpm Length: 458 mm Weight: 2.1 kg 1 x Transducer-controlled angle screwdriver Desoutter ERA60J Part no.: 6151650810 Torque range: 15 to 60 Nm Drive: 3/8" Speed: 570 rpm Length: 469 mm Weight: 2.2 kg 1 x Screwdriver controller Desoutter MODCVI-2 (rack version of TWINCVI-2) with transformer Part no.: 6159325210 Screw channels: 2 Number of fastening cycles per channel: 250 Number of phases in a fastening cycle: 20 IO total counter: 99 Screwdriving result memory: Torque + Angle + Date + Time + Result + (Barcode): up to 11,600 Screwdriving curves: 6 Possible fastening strategies: Torque control with angle monitoring Angle control with torque monitoring Torque/angle control Torque control with angle and gradient monitoring Angle control with torque and gradient monitoring Yield point control Torque hold / position hold Friction torque test Current plausibility 2 x Motor cables for handheld screwdrivers, 5 m length Part no.: 6159170720 Bjdpfx Ansdcmizo Heln 1 x Transducer cable, 5 m length Part no.: 6159171220 Including operating manuals

Gamybos metai: 2023, būklė: beveik kaip naujas (parodų įrenginys), Parker Zander Adsorption Dryer K-MT6, cold-regenerated, with multitronic-plus control system with dew point control with pre- and after-filters Exhibition Unit: Parker / Zander Adsorption System K-MT6 Bledpfx Anom Twwbs Hjn Year of manufacture: 2023 Technical Data: Compressed air connection: BSPT G 1/2" Flow rate: 0.93 m³/min at a dew point of -40°C Other models and configurations available on request! Max. pressure: 16 bar Min. pressure: 5 bar Compressed air inlet temperature: 25° to 50°C Ambient temperature: 1.5°C to 50°C Installation location: frost-free indoor installation in a non-aggressive environment. Mains voltage: 230 V, 50-60 Hz Protection class: IP65 Dimensions: Width: 493 mm Depth: 300 mm Height: 1203 mm Weight: 48 kg Visit our showroom. We always have a large selection of compressors and dryers in stock.

Būklė: naudotas, Aprašymas: Bodpsygr E Refx An Hjln CTS klimatinio bandymo kamera CW-60/6 -60°C iki +120°C 6000 litrų (6 m³) Temperatūros diapazonas: -60 °C iki +120 °C Temperatūros nuokrypis: ±0,5 iki 1 K laike Šildymas: 1 K/min nuo -40 °C iki +80 °C Aušinimas: 1 K/min nuo +80 °C iki -40 °C Temperatūros diapazonas: +10 °C iki +95 °C Drėgmės diapazonas: 10 % iki 85 % santykinės drėgmės Rasos taško diapazonas: +5°C iki +89 °C Temperatūros nuokrypis: ±0,5 K laike Drėgmės nuokrypis: ±1 - ±3 % sant. dr. laike Matmenys: Vidiniai matmenys: Tūris: apie 6000 litrų (6 m³) Vidiniai matmenys apie: Aukštis – 2000 mm, Plotis – 2000 mm, Gylis – 1500 mm

Būklė: naujas, Gamybos metai: 2022, 28.85 linear meters wide-span shelving, 60 cm deep Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 28.85 linear meters Shelving offer includes: - 16 x frames, approx. 200 x 60 cm, disassembled - 90 x beams, approx. 185 cm - 45 x chipboard shelves, approx. 184.5 x 59.5 cm - Includes safety pins - Model: BLT, Type WR20/60 - Load capacity: 400 kg per shelf level, with evenly distributed load - Levels: 3 storage levels - Chipboard, natural finish Blodpsz H Smkefx An Hsn - Uprights painted blue - Brand new, in stock - Other quantities available! Frame pre-assembly can be carried out by us for a small additional charge of €6 net per frame. Delivery available on request at an attractive rate. -- AVAILABLE FOR IMMEDIATE DELIVERY, MULTIPLE SETS IN STOCK -- Price: €2,360.00 net Plus applicable statutory VAT. An invoice with VAT shown will be provided. Transport: Delivery is carried out by our partner freight forwarder if desired, with costs depending on postal code. Assembly: Our trained staff are available to professionally assemble and disassemble your industrial equipment if required. Our recommendation: Let us know your requirements... We are happy to assist you with the realization of your projects, from planning and ordering through to assembly.

Būklė: naujas, Gamybos metai: 2022, 11.46 linear meters wide span rack, 60 cm deep Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm Bledpfx Ansz H Smds Hjn - Length: approx. 11.46 linear meters Rack package includes: - 07 x frames approx. 200 x 60 cm, disassembled - 36 x beams approx. 185 cm - 18 x shelf panels approx. 184.5 x 59.5 cm - Including locking pins - Model: BLT, Type WR20/60 - Load capacity: 400 kg per shelf, with evenly distributed load - Levels: 3 storage tiers - Chipboard, natural finish - Uprights blue - New stock available from warehouse - Other quantities available! Frame pre-assembly can be carried out by us for a small surcharge of €6/net per unit. Delivery available on request at favorable rates. -- IMMEDIATE MULTIPLE AVAILABILITY -- Price: €965.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Transport: Delivery is handled by our partner forwarding company on request, costs are dependent on postal code. Assembly: Our trained staff will be pleased to assist you with professional installation and dismantling of your company equipment if required. Our recommendation: Let us know your requirements... We are happy to assist you with your project—from planning and ordering to installation.

Būklė: labai geros būklės (naudotas), Vötsch Type: VT³ 7006 S2-M Water-cooled Technical Specifications: Maximum test specimen weight: 20 kg Bodpfx Aszima Hsn Hjln Test chamber volume: 60 liters Test chamber dimensions: width 380 mm, depth 430 mm, height 370 mm External dimensions: width 875 mm, depth 1970 mm, height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via transfer carriage) Hot chamber temperature range: +50 °C to +220 °C (calibration value +125 °C) Cold chamber temperature range: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm duct for measurement/supply of the test item SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW Rated current: 25 A Refrigerant: R-404A R-23 Weight: approx. 800 kg Important safety information for you as the buyer! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data and information subject to change and error!) Please feel free to contact us by phone for further questions.

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, garantijos trukmė: 6 mėnesiai, įėjimo įtampa: 400 V, paskutinio kapitalinio remonto metai: 2026, Sertifikuota DGUV iki: 06/2027, darbinis plotis: 600 mm, konvejerio juostos plotis: 600 mm, įvesties srovės tipas: trifazis, bendras plotis: 790 mm, bendras ilgis: 820 mm, bendras aukštis: 1 300 mm, TOP vyniojimo mašina Universum Kasper modelis: HWM 40/60 Visoms lazdelėms, pvz., Kornspitz, pretzel bei sūrioms lazdelėms ir kt. Universalus – kombinuotas vyniojimo aparatas Visų rūšių tešlai vynioti ir formuoti ilgoms formoms Bandelių vyniojimo mašina su apatiniu ilgos formos formavimo įrenginiu Mobilus įrenginys Prisijungimas: 400V, 16A-CEE kištukas Matmenys: 790 x 820 x 1300 mm, PlxGxA Naudota atnaujinta mašina Su garantija ir aptarnavimu Blodpfxjvvqhrj An Hon Papildomai: Pristatymo paslauga Vyniojimas nuo 300 iki 800 gramų Su konvejeriu Aptarnavimo paketas Priežiūros sutartis Atsarginių dalių dėžė Instruktažas ir paleidimas Lizingo ir nuomos paslauga Daugiau aukštos kokybės kepyklos mašinų sandėlyje!

Būklė: labai geros būklės (naudotas), CTS Type: C-40/350 Climate Test Chamber, Air-Cooled For sale is a professional CTS climate test chamber, model C-40/350. This unit is engineered for demanding environmental simulation in industrial applications, making it ideal for material testing, electronics, automotive, aerospace, and research purposes. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: Approx. 3500 W at +20°C Approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ ±3.0% rel. humidity over time These technical specifications refer to an ambient temperature of +25°C, rated voltage 400V, without test load, without heat compensation, and without additional equipment. Options may affect performance. Technical design: Refrigeration unit: Air-cooled, low-noise, fully hermetic, continuously variable capacity control by electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Grid shelf: Stainless steel, support surface 620 x 600 mm Maximum load per shelf: 35 kg Maximum total load (full shelf configuration): 100 kg Control system: 32-bit controller LCD control panel Digital display of set and actual values Numeric input of set values Error messages in plain text RS 232 interface Ethernet interface Free switching channels for external test item control Dimensions: Test volume: 350 liters Internal dimensions: height 750 mm × width 650 mm × depth 720 mm External dimensions: height 1800 mm × width 920 mm × depth 1670 mm Operating data: Electrical connection: 400V 3/N, 50 Hz Rated power: 7.1 kW Rated current: 11.5 A Bjdjzizmzepfx An Hjln Protection class: IP 54 Sound pressure level: -

Būklė: naudotas, mytron Model: T2240 Water-cooled temperature chamber Technical data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test chamber dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Blsdpfxjzizg Uj An Hsn Test chamber volume: approx. 2240 liters Cable entry ports: 2 x 100 mm right 2 x 100 mm left Temperature range: –40 °C to +100 °C at 23 °C ambient temperature Temporal temperature stability: +/- 0.5 °K Spatial temperature stability: +/- 1.0 °K Cooling: Water cooling, Inlet and outlet: 1'' female thread Cooling water shut-off via solenoid valve when device is OFF Fault display for chiller malfunction Cooling water consumption: inlet temp. approx. 15 °C, approx. 15 l/min, outlet temp. approx. 22 °C (continuous cooling approx. 27 °C) Mains connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Protection: 3 x 20.0 A time-lag, 3 x 10.0 A time-lag Lighting: 25 watt each, left and right sides of test chamber Exhaust connection: DN 100 mm push-fit system Safety device: Electronic overtemperature protection, fixed setting Smoke gas monitoring with audible alarm Viewing window: triple-glazed 130 x 360 mm Refrigerant: R404A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) Further questions can be answered by phone.

Būklė: labai geros būklės (naudotas), RS-Simulatoren Tipas: KKM 110/45 Gamintojas: RS-Simulatoren, vandeniu aušinama Klimatinė kamera 110 m³, įskaitant kondensatorių Tipas KKM 110/45 priklauso RS‑Simulatoren TKM/KKM modulinei konstrukcijai – tai modulinė klimatinė kamera, kuri surenkama kliento vietoje. Ši konstrukcija siūlo: Moduliškumą: atskiri segmentai yra iš anksto surenkami ir montuojami pas klientą. Todėl paprasta vėliau pridėti papildomų modulių arba išplėsti gylį, taip pat nesudėtingas perkėlimas į kitą vietą. Techniniai klimatinės kameros duomenys: Gamintojas: RS-Simulatoren Prüf- und Messtechnik GmbH Tipas: KKM 110/45 Išoriniai matmenys: 6200 x 9400 x 3400 (P x G x A mm), įskaitant techninius priedus Vidiniai matmenys: 5900 x 7000 x 2960 (P x G x A mm) Kameros durys (dvivėrės): 3600 x 2930 (P x A mm) Asmeninė durys (vienvėrė), šoninėje sienoje: 1880 x 900 (A x P mm) Praėjimai: 8 x Ø120mm (4x kairėje ir 4x dešinėje) Langai: 1x (460 x 550 mm) šildomas, priekinėse kamerų duryse 1x (1260 x 1000 mm) šildomas, kairėje šoninėje sienoje Temperatūros diapazonas: nuo -40°C iki +120°C Laiko nuokrypis: ± 0,8K – 1,5K pagal DIN 50011 esant tuščiai bandymų erdvei Drėgmės diapazonas: 10% iki 95% Drėgmės tolerancija: +/- 5,0% Šaltnešis: 2x R404A 52kg, 2x R23 17kg Temperatūros pokyčio greitis: Šildymas: 1,0 K/min Aušinimas: 1,0 K/min Maksimali apkrova 500 kg/m² Elektros duomenys: Įtampa: 3x400V/N/PE, srovė: 340A Svoris: apie 2 000 kg Saugumo sumetimais, pirkėjams pateikiame šią informaciją: Iš anksto pasiūlytoms kameroms atliekami šie darbai: 1. Funkcionalumo patikra ir reikiamų komponentų keitimas 2. Jei reikia, užpildomas nauju, teisės aktus atitinkančiu šaltnešiu Bsdpfx Anozizldj Holn 3. Sandarumo patikra su sertifikatu 4. Po sėkmingos patikros atliekamas dokumentuotas bandomasis veikimas. Būklė: naudotas Pristatymo apimtis: (žr. nuotrauką) (Techniniai duomenys gali būti koreguojami ar netikslūs, informacija nėra galutinė!) Dėl papildomų klausimų mielai atsakysime telefonu.

Būklė: labai geros būklės (naudotas), Weiss Type: WK3-340/40 Weiss Climate Test Chamber Air-Cooled Temperature Testing Volume 335 liters Test chamber dimensions: Internal dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature –42°C Maximum temperature +180°C Temperature change rate, cooling 4 K/min Temperature change rate, heating 3.2 K/min Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature uniformity, spatial ± 0.5 to ±1.5 K Climate Testing: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% r.h. Temperature deviation, temporal ± 0.1 to ± 0.3 K Temperature uniformity, spatial ± 0.5 to ±1 K Blsdpjziyygjfx An Hjn Humidity deviation, temporal ± 1 to ± 3 % r.h. Halogen lamp 2 x 24V, 50W Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight approx. 515 kg For your safety as a buyer, the following measures are always carried out on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and error!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Vötsch Model: VT³ 4100 Water-cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Features of this controller: - Color touchscreen with intuitive menu (typically 5.7" or larger) - Programming of temperature/humidity profiles including ramps and dwell times - Data acquisition & logging (e.g., temperature progression, alarms) Bledpfx Anoziyxps Hon - USB port for data export (CSV, S!MPATI-compatible as applicable) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Specifications (Temperature Test Chamber) Test volume: 990 liters Temperature range: -40 °C to +180 °C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (per IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Thermal compensation capacity (max): 4500 W Calibration setpoints: +23 °C and +80 °C Internal dimensions (W×D×H): 1100 × 950 × 950 mm External dimensions (W×D×H): 1390 × 1955 × 1995 mm Cable Ports: - The test chamber is equipped with ports on both the right and left sides. - These allow measurement cables and test devices to be routed into the test space. - 1 × L1 DN 50 mm - 1 × R1 DN 125 mm - 3 × R1 DN 50 mm Power connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg Important safety information for buyers! The following steps are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, documented trial run of the chamber Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and error!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), TIRA Type: TCZ 4022 S -2K Description: Air-cooled Climate Simulation Chamber System Composition: The system consists of the following main assemblies: - Walk-in, insulated chamber - Air treatment compartment - Humidification system - Machinery compartment - Control cabinet Technical Data: Performance range for temperature testing: - Temperature range: -40...+140°C - Temperature stability, in supply air (temporal): ≤ ± 0.5°C (without thermal test chamber load, in accordance with DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ± 1.0°C (without thermal test chamber load, in accordance with DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load per DIN 50011 / EN 60068, or test specimen in the temperature range -30°C...+85°C) - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load per DIN 50011 / EN 60068, or test specimen in the temperature range -30°C...+85°C) Performance range for climate testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% rh (without thermal chamber load) - Dew point temperature range: +5...+89°C (without thermal chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% rh (measured in supply air) Performance range for climate testing with heat compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% rh (without thermal chamber load, with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal chamber load) Dimensions: - Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm - External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening, test chamber door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design Features: - Air guidance: * Supply air: Perforated sheet at the rear wall, in the ceiling area * Exhaust air: Perforated sheet at the rear wall, in the floor area - Temperature control: * Direct cooling via evaporation of refrigerant in a finned heat exchanger * Heating via electric resistance heater - Dehumidification: * Direct dehumidification by evaporating refrigerant in a heat exchanger - Interior cladding: Stainless steel - Exterior cladding: Galvanized, powder-coated steel sheet - Floor design: Stainless steel, floor load 15,000 N/m² - Wheel load (bearing surface ≥4 cm²): 1,500 N/wheel - Door: Double-wing door, stainless steel, lacquered exterior with viewing window (W x H) 1,000 x 1,000 mm - Chamber lighting: 4 spotlights at 500 W each - Insulation: Double-layer, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc.): Blitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc.): EDB 40 Color scheme: - Chamber: RAL 9010, white - Door: RAL 9010, white - Machine unit: RAL 7032, pebble grey - Control cabinet: RAL 7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidifying unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50Hz Bljdezizk Hepfx An Hsn - Rated power: 95 kW - Rated current: 150 A

Būklė: labai geros būklės (naudotas), Parduodamas pramoninis KSB ETABLOC GN 40-160/402 išcentrinis siurblys su 4,6 kW galios elektros varikliu. Siurblio duomenys: • Gamintojas: KSB • Modelis: ETABLOC GN 40-160/402 • Versija: GN11 • Siurblio numeris: 4-925-237868/1 • našumas: 7,5–32,5 m³/h • Pakėlimo aukštis: 35,8–32,5 m • Siurblio sūkių greitis: 2900 aps./min • Pagaminimo metai: 2000 Bedpfx Aozva Azen Hjln Variklio duomenys: • Variklio tipas: QU FA 112M2A-60 • Variklio numeris: 146249 RU • Galia: 4,6 kW • Maitinimas: trifazis • Dažnis: 50 Hz • Įtampa: 380–420/660–725 V • Srovė: 7,8–7,6/4,5–4,4 A • Sūkių greitis: 2850 aps./min • cos φ: 0,91 • Apsaugos klasė: IP55 • Izoliacijos klasė: F • Darbo režimas: S1 • Siurblio svoris: 57 Siurblys naudotas, būklė, kaip matyti nuotraukose. Matomi normalūs naudojimo ir laikymo pėdsakai.

Būklė: labai geros būklės (naudotas), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Data for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rate: Heating 6.0 K/min Cooling 11.5 K/min Temperature deviation: Over time: ± 0.8 K Spatial: ± 2.0 K Heat compensation max. 8000 W Data for Climate Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% r.h. Temperature deviation over time: ± 0.3 K Humidity deviation over time: ± 3% r.h. Temperature uniformity: Spatial: ± 1.0 K Heat compensation max. 500 W Test chamber volume: 2160 liters Test chamber dimensions: Height 1115 mm, Width 1400 mm, Depth 1400 mm External dimensions (lowered): Height 2318 mm, Width 1860 mm, Depth 3658 mm External dimensions above shaker: Height 2710 mm External dimensions max. stroke height: 3038 mm Interchangeable floor dimensions: Width 1600 mm, Depth 1504 mm Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Bjdpfeziixrox An Heln Rated power: 38.0 kW Rated current: 63.0 A Customer-side circuit protection: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2100 kg For your safety as a buyer, please note the following information! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and details subject to change or error!) We are happy to answer any further questions by phone.

Būklė: naudotas, Gamybos metai: 2017, veikimo valandos: 1 158 h, keliamoji galia: 1 400 kg, kėlimo aukštis: 2 930 mm, kuro tipas: elektrinis, pavaros tipas: automatinis, bendras svoris: 1 100 kg, tuščias svoris: 853 kg, spalva: oranžinė, rida: 1 158 km, pirmoji registracija: 04/2017, pakaba: kitas, sėdimų vietų skaičius: 1, vairuotojo kabina: kitas, emisijos klasė: nėra, kuras: elektra,

Būklė: naujas, Gamybos metai: 2022, 7,65 b.m. Plačiosios konstrukcijos lentynų sistema, 80 cm gylio. Duomenys: Bedpoz H Snhsfx An Hjln - Aukštis: apie 200 cm - Gylis: apie 60 cm - Ilgis: apie 9,56 b.m. Lentynų sistemos pasiūlymas apima: - 05 x rėmai, apie 200 x 60 cm, išardyti. - 32 x skersinės, apie 185 cm. - 16 x lentynos, apie 184,5 x 59,5 cm. - Įskaitant tvirtinimo kaiščius. - Modelis: BLT, tipas WR20/60 - Apkrova: 400 kg vienos lentynos apkrova, esant tolygiai paskirstytam svoriui. - Lentynos: 4 x laikymo lentynos. - Lentjuostė, natūralios spalvos. - Stulpai – mėlyni. - Nauja prekė, sandėlyje. - Galimi ir kiti kiekiai! Rėmų išankstinis surinkimas gali būti atliktas už nedidelį papildomą mokestį – 6 € (be PVM) už vienetą. Pristatymas pagal užklausą, už patrauklią kainą. -- ŠIUO METU YRA DAUGIAU VIENETŲ-- Kaina: 815,00 € (be PVM) PVM pridedamas pagal galiojančius įstatymus. Jums pateikiama sąskaita, kurioje nurodytas PVM. Transportas: Jei pageidaujate, pristatymą atliks mūsų partnerių transporto įmonė, kaina priklauso nuo pašto kodo. Montavimas: Mūsų kvalifikuotas personalas, jei reikia, suteiks profesionalią pagalbą montuojant ir išmontuojant jūsų įrangą. Mūsų rekomendacija: Praneškite mums apie savo poreikius... Mielai padėsime jums įgyvendinti jūsų projektus, nuo planavimo iki užsakymo ir montavimo.

Būklė: labai geros būklės (naudotas), Weiss Type: WT3-1000/40 Weiss Temperature Test Chamber with S!MCON / 32 Control, Water-Cooled Control Panel »Touch Panel« All control and operation commands can be triggered on the control panel »touch panel« by simply touching the function symbols. Leveling Feet To compensate for floor unevenness and to ensure adequate ventilation of the machine component, the test chamber is equipped with adjustable feet. Cable Ports The test chamber is equipped with cable ports on the right and left sides. Measuring cables and testing equipment can be routed into the test compartment through these ports. Cable ports included in the standard version: R1: Nominal width 125 mm L1: Nominal width 50 mm Test Chamber Volume: approx. 990 liters Test Chamber Dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External Dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm Temperature Test Data: Temperature Range: -40 to +180 °C Temperature Fluctuation over Time at Chamber Center: ± 0.1 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 1.5 K Temperature Change Rate: Heating: 4.0 K/min Cooling: 3.0 K/min Maximum Heat Compensation: 4500 W Operating Data: Test Chamber Lighting: Halogen bulb 2x 24V, 50W Rated Voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated Current: 22.0 A, Rated Power: 11.5 kW Protection (on-site): 32 A slow-blow fuse Sound Pressure Level: Measured at 1m distance from the front, 1m height: 56 dB(A) Refrigerant: R-404A Weight: 840 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Bsdpfxozgbt No An Holn Scope of delivery: (See picture) (Technical specifications subject to change and error!) We are happy to answer any further questions you may have by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Weiss temperature test chamber. Weiss Temperature Test Chamber with S!MCON / 32-Control Unit, Water-Cooled (Refrigerant converted to R-452A) Control Panel »Touchpanel« All control and operation commands can be executed simply by touching the function symbols on the control panel “Touchpanel.” Adjustable Feet To compensate for uneven floors and ensure proper ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is fitted with feedthroughs on both the right and left sides, allowing measurement leads and testing equipment to be routed into the test space. Feedthroughs are included as standard equipment: R1: internal diameter 125 mm L1: internal diameter 50 mm Test Chamber Volume: approx. 335 liters Test Chamber Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for Temperature Testing: Temperature range: -42 to +180 °C Bljdszgbkhopfx An Hjn Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 3.2 K/min Cooling: 4.0 K/min Heat compensation max. 2300 W Operating Data: Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Rated power: 4.1 kW External fuse: 16 A slow-blow Sound pressure level (approx.): Measured at 1m distance from front, 1m height: 56 dB(A) Refrigerant: R-452A Weight: 515 kg Type: WT3-340/40 Important Information for Your Security as a Buyer! The following measures are carried out in advance for all test chambers offered by us: 1. Functional check and replacement of necessary components 2. If necessary, new filling with refrigerant in accordance with legal requirements 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photos) (Technical data subject to change and errors reserved!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Weiss climate test chamber. Weiss Climate Test Chamber, Water-cooled (Refrigerant converted to R-452A) Temperature testing Volume: 335 liters Test chamber dimensions: Blodpfx Ajzgavvsn Hjn Internal dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature: –42°C Maximum temperature: +180°C Temperature change rate, cooling: 4 K/min Temperature change rate, heating: 3.2 K/min Temperature deviation, temporal: ± 0.1 to ± 0.5 K Temperature uniformity, spatial: ± 0.5 to ± 1.5 K Climatic testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation, temporal: ± 0.1 to ± 0.3 K Temperature uniformity, spatial: ± 0.5 to ± 1 K Humidity deviation, temporal: ± 1 to ± 3% RH Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-452A Type: WK3-340/40 Weight: approx. 515 kg Important safety notice for buyers! The following services are carried out on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change or error!) If you have any further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), „Vötsch VC³ 4018-M“ – klimatinė testavimo kamera odos gaminiams, –40 °C iki +180 °C, 190 l, 10–98 % santykinės drėgmės, „Vaisala“ ir „SIMPATI®“ Modifikuota speciali versija, skirta odos gaminių bandymams. Temperatūros diapazonas: –40 °C iki +180 °C Testavimo kameros tūris: apie 190 litrų Drėgmės diapazonas: 10–98 % santykinės drėgmės Aušinimas: vandeniu aušinamas Parduodama naudota „Vötsch VC³ 4018-M“ klimatinė ir temperatūrinė testavimo kamera su drėgmės reguliavimo funkcija. Ši įranga tinka temperatūriniams ir klimatiniams bandymams, aplinkos modeliavimui, medžiagų bandymams, kokybės užtikrinimui, taip pat kūrimo ir apkrovos bandymams. Speciali „-M“ versija: Modelio priedas „-M“ nurodo modifikuotą versiją, skirtą odos ir odos gaminių bandymams. Plačiau išplėstas klimato diapazonas iki +120 °C, esant 10 % santykinės drėgmės. Talpinė „Vaisala“ drėgmės matavimo sistema Suspausto oro jungtis / GN2 K3000 3,5 colio jutiklinis ekranas vietoj standartinio 8 colių ekrano Jutiklinis ekranas ant testavimo kameros durų Techniniai duomenys: Gamintojas: „Vötsch Industrietechnik GmbH“ Tipas: VC³ 4018-M Testavimo kamera (plotis × gylis × aukštis): apie 580 × 450 × 750 mm Išmatavimai (plotis × gylis × aukštis): apie 870 × 1550 × 1800 mm Svoris: apie 470 kg Šildymas: apie 4 K/min Aušinimas: apie 4 K/min Maks. šiluminė kompensacija: apie 2300 W Bjdozna N Espfx An Hsln Temperatūros nuokrypis: ±0,1 iki ±0,5 K Temperatūros homogeniškumas: ±0,5 iki ±1,5 K Klimato duomenys: Standartinis klimato diapazonas: +10 °C iki +95 °C Rasos taško diapazonas: –3 °C iki +94 °C Drėgmės nuokrypis: ±1 iki ±3 % santykinės drėgmės Šiluminė kompensacija klimato režime: apie 400 W Specialus klimato diapazonas odos bandymams: iki +120 °C, esant 10 % santykinės drėgmės. Šaldymo ir jungčių duomenys: Šaldymo priemonė: R404A, užpildymo kiekis: 1,6 kg Maks. slėgis: 22,5 bar g, maks. slėgis aušinimo ciklo metu: 25 bar g Maitinimo įtampa: 3/N/PE AC 400 V ±10 % / 50 Hz Nominali galia: 4,1 kW, nominali srovė: 14 A Įranga: 3,5 colio valdymo skydelis „Vaisala“ drėgmės matavimo sistema Suspausto oro jungtis / GN2 K3000 Jungtis demineralizuotam vandeniui Akių langas ir nerūdijančio plieno testavimo kamera Testavimo kameros apšvietimas 2 × 24 V / 50 W Laido įvadai Ø 125 mm ir Ø 50 mm 3 lentynos „SIMPATI®“ programinės įrangos versija 2016 su 2 įrenginio licencijomis Autentiškumo sertifikatas ir originalus naudojimo vadovas Bandymų dokumentacija ir priedai, kaip parodyta nuotraukose Būklė ir komplektacija: Naudota / Used Vizualinė būklė, kaip parodyta nuotraukose. Komplektacija: „Vötsch VC³ 4018-M“, 3 lentynos, naudojimo vadovas, „SIMPATI®“ licencijos dokumentai, autentiškumo sertifikatas. Priedai, kaip parodyta nuotraukose. Į pasiūlymą neįeina daiktai, kurie nėra aiškiai nurodyti. Siuntimas transporto įmone yra galimas, susitarta tvarka. Pasilieka teisė keisti, daryti klaidas ir parduoti per kitą kanalą.

Būklė: labai geros būklės (naudotas), CTS Type: T-40/2000 Air-cooled Temperature Test Chamber Technical Specifications: Cooling Unit: Air-cooled, low-noise, fully hermetic with stepless capacity adjustment via electronic monitoring and control system. Uses environmentally friendly refrigerant R404A. Door: Fully opening door, left-hand hinge, one-handed operation, lockable. Rack: Stainless steel, support surface 970 x 980 + 500 mm. Maximum load per rack: 35 kg. Maximum total load with full racking: 100 kg. Test Chamber Illumination: 3x halogen lamps, 20 W, 12 V. Control: 32-bit controller. LCD control panel. Digital display of set and actual values. Numeric input of set values. Plain text error messages. RS 232 interface. Free switching channels for customer-side specimen control. Temperature Range: -40°C to +180°C Rated Voltage: 400V 3/N 50Hz Rated Power: 10.4 kW Rated Current: 17.2 A Compressor: TFH2516Z Pipe lead-through NW 50 Control Panel Window: 570 x 710 mm Electrical connection, cable length: 5m Technical Performance Data: Temperature Tests: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 1.5 K/min Heat Emission: Approx. 2500 W at +20°C Approx. 2100 W at 0°C Approx. 1500 W at -20°C Technical data refer to ambient temperature of +25°C, rated voltage 400 V, without test specimen, without heat radiation, and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions (internal): Height 900 mm, Width 975 mm, Depth 2200 mm External dimensions: Height 1950 mm, Width 1290 mm, Depth 3145 mm Operational Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain: non-pressurized, R 1/2" internal thread Sound pressure level (measured per DIN EN ISO 3744, 1 m in front): < 55 dB(A) Weight: approx. 1200 kg Important information for your safety as the buyer! The following points are carried out on all chambers we offer, prior to sale: 1. Functional check and replacement of necessary components 2. If required, new fill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data and information!) Blsdpfx Anezg Twaj Hon We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), Binder Temperature Test Chamber Model: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber, designed for professional heat and cold testing in industrial, research, development, and quality assurance applications. The temperature test chambers from the Binder MK series are particularly suitable for cyclical temperature testing and reproducible tests under defined environmental conditions. This chamber enables temperature testing within a range of -40 °C to +180 °C and represents an efficient alternative to custom-built solutions. Technical Data: Temperature Range: -40 °C to +180 °C Test Chamber Volume: approx. 228 liters Temperature Performance Data: Spatial temperature deviation: 0.1 to 1.2 ± K Temporal temperature deviation: 0.1 to 0.5 ± K Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Bedoy Nicmopfx An Heln Test Chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load Capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Features: 2 x access ports Ø 70 mm 1 door 2 standard shelves / up to 6 shelves possible Electrical Data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse protection: 16 A Phases: 3~ Weight: approx. 320 kg Condition: Used Scope of delivery: Scope of delivery as per images Inspection by appointment possible. Loading can be organized. Sale without warranty. (Specifications subject to change and errors excepted)