- Šlifavimo Stalas pirkti naudotą (14 317)

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1975, DISKINIS ŠLIFAVIMO STAKLIS (dviejų plokštumų šlifavimo staklis) Lrsdpfx Ahozzpaascot „DISKUS WERKE AG“ (FRANKFURTAS / MAINE), modelis DDS 600 P, pagaminimo metai – 1975 m., PILNAI ATNAUJINTAS 2024 m.

Būklė: naujas, Industrie Bitossi Alubit 90 cylindrical grinding stones Material: high-density sintered alumina ceramic Dimensions: 35 x 35 mm Al₂O₃ content [mass%]: 90.0 ± 0.5 Bulk density [g/cm³]: 3.63 ± 0.07 Hardness (Rockwell scale): 78 ± 3 Hardness (Mohs scale): 9 Colour: white Lrjdpfod Szf Eex Ahcst Quantity: approx. 1500 kg in stock

Būklė: geras (naudotas), Universal Milling Machine STANKO 676P Table longitudinal travel X: 400 mm Table vertical travel Y: 380 mm Overarm cross travel Z: 250 mm Clamping surface of the vertical table: 250 x 630 mm Spindle taper: MT 4 Quill stroke: 60 mm Lodpfx Ahetrybgocert Swivel angle of the vertical head: +-90° Table size of the fixed angle table: 800 x 250 mm Distance between horizontal milling spindle and fixed angle table: 80 - 460 mm Distance between vertical milling spindle and fixed angle table: 0 - 380 mm Distance between vertical head spindle and column: 125 - 375 mm 16 horizontal spindle speeds: 50 - 1630 rpm 16 vertical spindle speeds: 60 - 2040 rpm 16 longitudinal and vertical feeds: 13 - 395 mm/min 16 spindle feeds: 13 - 395 mm/min Rapid traverse all axes: 0.935 m/min Drive power: 2.2 kW Weight approx.: 1.4 t Used, in good condition

Būklė: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, statybinis aukštis: 360 mm, kėlimo aukštis: 1 050 mm, keliamoji galia: 3 000 kg, bendras svoris: 450 kg, bendras ilgis: 1 350 mm, bendras plotis: 900 mm, Scissor Lift Table HYMO SXU Hydraulic Lift Table for sale in very good condition, 3000kg load capacity Manufacturer: HYMO Model: SXU 30 8/9 Year of manufacture: 1995 Platform size: 1350 mm x 900 mm Max. height: 1050 mm Load capacity: 3000 kg Hand control Minimum height: 360 mm (from the floor to the top edge of the blue platform) Motor: 1.1 kW 380/220 V 50 Hz IP54 Ledpfxswav D So Ahcert

Būklė: naudotas, 3D Coordinate Measuring Machine ZEISS NUMEREX - Non-Functional Granite Measuring Plate, Granite Table, Measuring Table Model No. 3648-18, Serial No. X-1019, Year of manufacture approx. 1986 Measuring range: X = approx. 1,250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring plate (L x W): 1,525 x 1,435 mm Usable area: 1,525 x 1,100 mm Plate thickness: 305 mm Clearance width in the gantry: 1,100 mm Probe holder: Ø 9.5 mm Compressed air connection: 6 bar Electrical connection: 230 Volt, 50 Hz - Granite plate with steel inserts with internal threads - Axis adjustment with pneumatic slide guidance for X, Y, and Z axes - Plate mounted on a base frame with 5 adjustable feet, 3 support discs for the feet Lsdpfx Asfy U Ewshcert - Computer and software missing (not present and not included in the scope of delivery) → Not functional! Space requirement (L x W x H): 1,600 x 1,850 x 2,200 mm Machine weight: approx. 2.8 tons Plate damaged on one side, see picture, otherwise in good condition.

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Plunge feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg including clamping device Internal spindle mount: 70 mm Lrodst Ii Nuspfx Ahcet Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a worldwide leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver these machines in like-new condition with warranty, but also provide service for your machines. Machine geometry overhauled and newly painted, with original electrics. Photo shows a recently delivered 600U. - Digital readout in 2 axes, x-axis resolution 0.5 μm Options: - Rotary encoder with digital readout in the workpiece spindle headstock - Rotary encoder with digital readout in the grinding spindle headstock (no height adjustment possible with spindle) - New stable internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Centre height can be increased up to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories available on request. At present, the machine tool does not comply with the essential safety and protection requirements as stipulated in the German Industrial Safety Ordinance (BetrSichV 2015). Compliance with the required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight: approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle refurbishers - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor are electrically interlocked! Internal grinding spindle can only be activated when in position. A quantum leap in safety technology. - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of grinding spindle speeds - Swivel angle display for the upper table Lodpfot Ii Rrsx Ahcsrt - Swivel angle display for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid contact sensor for internal grinding - Centre height up to 250 mm possible The machine is already delivered. An identical machine can be configured with additional options. The machine tool currently does not comply with the fundamental safety and protection requirements as stipulated in the German Operational Safety Ordinance (BetrSichV) 2015. An increase of the required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 500 mm Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. New servo motors in the X-axis and for the workpiece headstock. Photo shows a previously delivered machine in original equipment. - Operation via the touch panel is extremely user-friendly. - The symbols on the control panel are virtually identical to the original control system, so no retraining is required. - Diagnostic function with display of PLC messages and digital I/O. - Dressing function can be expanded or modified according to customer requirements. - Option for spindle orientation of the workpiece spindle upon request. - New maximum infeed amount: 40 mm (can be further increased on request). - Digital readout in 2 axes. Resolution on X-axis: 0.5 µm Options: - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding spindle stock (no height adjustment possible with spindle) - New, robust internal grinding attachment with 80 mm or 100 mm diameter, including height adjustment - Increase of centre height to maximum 225 mm - Speed control for the grinding spindle Includes: - Operating tools - Draw tube for chuck Lsdpfx Ahouwv Idjcjrt Additional accessories available on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external cylindrical and internal grinding, or for external, face and internal grinding of single workpieces in one setup. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control At present, the machine does not comply with the essential safety and protection requirements according to BetrSichV 2015 (German Occupational Health & Safety Regulation for the use of work equipment). Raising the required minimum protection level must be assessed by conducting a risk assessment according to BetrSichV.

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Lrodpfx Aouxftxehcet Grinding headstock swivel range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel range: ±8° Longitudinal table travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. cantilevered workpiece weight: 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we not only deliver machines in as-new condition and with warranty, but can also provide service for your machines, including recently delivered machines, with additional options such as: - Splash guard doors - X-axis enclosure - Grinding headstock swivel angle display Available at extra cost. Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guides in the flat bed of the X-axis as well as pneumatic lift-off in the grinding headstock as standard. - Digital readout in 2 axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) - New, robust internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Increased centre height up to a maximum of 225 mm - Variable speed control for the grinding spindle Includes: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine tool does not currently comply with the basic safety and protection requirements as specified in the 2015 Industrial Safety Regulation (BetrSichV). The necessary minimum safety objectives must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Ledpfjuxfucox Ahcert Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical overhaul: - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...

Būklė: naudotas, Gamybos metai: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -T6: internal grinding attachment -T7: internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP control on T1 and T2 by ELASO (contactless), integrated into the control interface -GAP control on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock, hydraulic with fine adjustment +/-150 µm -Dressing device on the lower table, workpiece spindle side -Dressing device on the lower table, tailstock side -Dressing device on the upper table -New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece headstock with direct drive *highly recommended for non-circular grinding *max. workpiece weight, between centers: 150 kg *max. workpiece weight, overhung: 75 kg *water-cooled *Morse taper 5 combined with short taper mount to DIN 55026 *spindle orientation stop *fixed lower section B-axis with direct drive, center height 225 mm *extremely torsion-resistant *high positional accuracy *resolution ° *water-cooled MECHANICAL OVERHAUL: - Complete machine overhauled according to Kellenberger measurement protocol - New paintwork New hydraulic unit: - Improved temperature control (oil cooler) - Energy-saving: only one pump, and not running continuously! - Pressure monitoring - Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X axis - Wear-free, since no contact during operation - No loss of accuracy, even during prolonged operation under full load at maximum speed - Friction-free at low speeds - No reversal jump of friction force when changing direction - Transmits smallest rotational movements - No stick-slip effect even at low speeds - No fluctuation in friction torque due to recirculating balls - Higher axial stiffness than ball screw drives - Significantly better damping, leading to improved workpiece surface and longer tool life - No vibrations due to recirculating balls Lodpfx Ahjuxfu Njcsrt - Also suitable for high speeds and accelerations - Cost-effective alternative to linear motors, offering higher accuracy and much less heating - Much lower power loss and thus no swarf issues on permanent magnets - Much lower cooling requirements compared to linear motors ELECTRICAL OVERHAUL: -New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface -Newly constructed control cabinet -New drive technology -Replacement of all electrical wiring (Berus pressure switches etc.) -New absolute glass scales in X and Z -New absolute encoder (for B-Axis) CONTROL SYSTEM: The grinding software consists of a base license and various options, depending on the machine configuration. Software base functions: - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillation grinding - Workpiece...

Būklė: naudotas, Gamybos metai: 2002, Grinding diameter: 250 mm Grinding length: 400 mm Centre height: 125 mm Control system: Fanuc 21i-T Machine serviced and partially overhauled. - New grinding spindle bearings - New X-axis spindle - Upper table re-ground - New table geometry - New geometry between WSS and grinding spindles Lrodevx Dvuopfx Ahcjt B-axis with 1° Hirth serration Longitudinal positioning HF internal grinding spindle GAP control Paper band filter

Būklė: naudotas, Gamybos metai: 2007, Šlifavimo ilgis: 600 mm Lodpjykmqvjfx Ahcjrt Šlifavimo plotis: 400 mm Ruoinio aukštis: 375 mm Prižiūrėta ir iš naujo grandyta išilginė ašis Stiklinės liniuotės vertikalioje ir skersinėje ašyje Šlifavimo diskai: 300/50/76,2 mm Magnetinė prispaudimo plokštė: 600x400mm su laikymo jėgos reguliavimu Universalus popierinis filtro automatas UPF100 su 280 l talpa baku.

Būklė: naudotas, Gamybos metai: 2004, Šlifavimo skersmuo: 250 mm Šlifavimo ilgis: 650 mm Centru aukštis: 125 mm Staklės parduodamos su priežiūra ir nauja geometrija Iki šiol dirbta valandų: 12 260 Uodegė su tikslaus reguliavimo galimybe Šlifavimo verpstės korpusas pasukamas su 5° Hirt dantytumu Popierinės juostos filtras Ljdpfx Ajywntyshcert Marposs matavimo įranga Vidinio šlifavimo įranga

Būklė: naudotas, Gamybos metai: 1990, Šlifavimo skersmuo: 200 mm Šlifavimo ilgis: 340 mm Centras ašies aukštis: 100 mm Valdymas: CNC Ledpfoywnt Hox Ahcjrt Jungties galia: 25 kVA Darbinė įtampa: 110 / 220 / 3x165 / 3x380 VAC Valdymo įtampa: 24 VDC

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1500 mm Lodpfxjd Ih Dvs Ahcort Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workpiece headstock swivelling: 360° Grinding spindle head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±6° Longitudinal table travel: 1750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight, cantilevered: 130 kg including clamping Internal spindle mount: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Required floor space approx.: 5.6 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver the machines in as-new quality with warranty, but can also offer you comprehensive service for your machines. Geometrically overhauled and freshly painted with original electrics, but with new WSS drive and controller in three-phase technology. Optionally available with splash guard doors and X-axis enclosure. - 2-axis digital readout. X-axis resolution 0.5 μm Available options at extra charge: - Swivel angle display for upper table - Rotary encoder with digital readout in the workpiece headstock - Rotary encoder with digital readout in the grinding spindle headstock (spindle height adjustment not possible) - New robust internal grinding attachment, 80 mm or 100 mm diameter, with height adjustment - Increase of centre height up to max. 225 mm Included: - Operating tools - Clamping tube for chuck Further accessories on request. At present, the machine tool does not meet the essential health and safety requirements as specified in the German Industrial Safety Ordinance (BetrSichV 2015). The required minimum safety objectives must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 800 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 2 000 mm, stalo apkrova: 5 000 kg, ašies skersmuo: 110 mm, bendras aukštis: 3 800 mm, bendras ilgis: 5 000 mm, bendras plotis: 3 000 mm, stalo ilgis: 1 520 mm, stalo plotis: 1 225 mm, padavimo ilgis X ašis: 1 800 mm, padavimo eiga Y ašimi: 1 500 mm, padavimo ilgis Z ašis: 2 000 mm, Įrankio laikiklis SK50, Heidenhain valdymas, staklės paruoštos atsiėmimui ir iškart naudojimui. Ljdpfx Asxga Tnshcert

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, šlifavimo ilgis: 1 500 mm, šlifavimo plotis: 300 mm, Diskinis šlifavimo staklės su magnetine tvirtinimo plokšte, 1500 mm x 300 mm. Šlifavimo staklės veikė iki pat jų išmontavimo. Įmonė buvo likviduota dėl įmonės savininko amžiaus. Įmonės įkūrėjas visada buvo labai patenkintas šiais šlifavimo staklėmis, todėl netgi įsigijo dar vieną tokį patį! Komplekte yra aušinimo skysčio sistema. Galima nemokamai pakrauti į sunkvežimį naudojant kraną arba šakinį keltuvą. Lrjdpfez Dumnjx Ahcot

Būklė: beveik kaip naujas (parodų įrenginys), including hydraulic unit Without power chuck Schunk type: Rota THW +165 -43 CHF 8,250 EUR* Ljdpfx Ahed Szimecsrt

Būklė: naujas, Precision surface grinding machine with automatic longitudinal and cross feed. All cast components such as machine base, table, etc., are made from MEEHANITE® quality cast iron, making them ideally suited for tough daily use. Perfect for tool and mold making. Table size: 200 x 450 mm Installation height (max. spindle/table distance): 450 mm Max. table load: 150 kg Main spindle motor power: 1.5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2080 x 1200 x 1700 mm Weight, approx.: 950 kg* * machine only, without auxiliary units Features: - All cast parts, such as machine base, table, etc. made from MEEHANITE® quality cast iron - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical feed - Ergonomically positioned control panel - Automatic central lubrication - Separate hydraulic unit - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing arbor - Balancing scale - Dressing diamond - Demagnetizing unit - Machine lamp - Leveling elements - Operating tools - Operating manual - CE compliant Available options: - Electromagnetic chuck (fine pole) - Automatic demagnetizing control for electromagnetic chuck - 2-axis digital readout, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator - Partial enclosure with end-switch secured sliding doors - Full enclosure with end-switch secured sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel Lrjdpfjp Dt Ttox Ahcot - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options upon request Note: Image shows the similar FSM 2550 AH model. Images may depict the machine with optional equipment and in application examples.

Būklė: naujas, Precision surface grinding machine with automatic longitudinal and cross feed. All cast components such as the machine base, table, etc. are made from MEEHANITE® quality cast iron, making them ideally suited for tough, everyday industrial use. Perfect for tool and mould making. Table size: 250 x 500 mm Lrsdpfxop Dt T Ne Ahcet Installation height (max. distance spindle/table): 500 mm Max. table load: 250 kg Main spindle motor power: 1.5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2250 x 1400 x 1800 mm Weight, approx.: 1350 kg* * machine only, without auxiliary units Features: - All cast components, e.g. machine base, table, etc., made of MEEHANITE® quality cast iron - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic unit - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing arbor - Balancing stand - Dressing diamond - Demagnetizing device - Machine lamp - Leveling elements - Operating tools - Operating manual - CE Available options: - Electromagnetic clamping plate (fine-pole) - Automatic demagnetizing control for electromagnetic clamping plate - 2-axis digital readout, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator - Partial enclosure with end-switch secured sliding doors - Full enclosure with end-switch secured sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Linear ball screw for cross feed - Further options on request Images may show the machine with optional accessories and in application examples.

Būklė: naudotas, Jung F 50 plokščioji šlifavimo staklė Būklė: naudota Techniniai duomenys Šlifavimo ilgis: 500 mm Šlifavimo plotis: 200 mm Šlifavimo aukštis iki veleno centro: 285 mm Stalo dydis: 700 x 200 mm Veleno apsisukimų dažnis: apie 3000 aps./min Šlifavimo diskas: 225 x 20 x 51 mm Padosava: rankinė per rankenėlę Greitas kreipimas Išlyginimo įtaisas Ledsyuy Eujpfx Ahcsrt Matmenys I / P / A: apie 1850 mm / 1300 mm / 1750 mm Svoris: apie 1400 kg

Būklė: naudotas, Apvaliųjų paviršių šlifavimo staklės: Schaudt Modelis: RFH 500 Būklė: naudota Centers aukštis: 100 mm Atstumas tarp centrų: 500 mm Veleno apsukos: 2225 / 2500 / 2825 1/min Šlifavimo disko skersmuo min./maks.: 200 - 300 mm Svoris, apie: 1900 kg Įranga: - Rankinis ir automatinis veikimas - Aušinimo skysčio sistema - Darbo lemputė - Avarinis stop mygtukas - Staklių atraminės kojelės Lredpfjy R Dlfjx Ahcst

Būklė: labai geros būklės (naudotas), Diskinė pjovimo staklė – su pakeliamu stalu gale Valdymo sistema POWER CONTROL V2.1 (Power TOUCH) Programinė įranga CADmatic 5 (TAPIO READY) Pakeliamo stalo matmenys (mm) 3800 x 2200 Galinis stūmiklis (vnt.) 1, su tvirtinimo įtaisais (7 + 2) Maks. pjovimo plotis (mm) 3800 Naudingas stūmiklio pakėlimo aukštis (mm) 3800 Maks. disko iškyša (mm) 125 Priešpjovimo diskas (maks. disko skersmuo / galia) mm 180 / kW 2,2 (apytiksliai) Pagrindinis diskas (maks. disko skersmuo / galia) mm 450 / kW 28 Lrodpfoz Erw Hjx Ahcet Reguliuojamas disko vežimėlio judėjimo greitis (m/min) 1–150 Priekiniai oro pagalvėmis paremti stalai (vnt.) 3 (2 x 2160 mm x 800 mm + 1 x 2810 mm x 800 mm) Bendroji prijungimo galia (kW) 34

Būklė: naujas, Mašinos svoris: apytiksliai 0,6 t Stalo plotis: – mm Stalo aukštis: – mm Lredpfx Ahjgvq Hlocot Specialus 96 dalių rinkinys, skirtas 28-osios sistemos įrangai, sudarytas iš: 1 x įrankių vežimėlis 30 x greitojo užtvirtinimo varžtai su sukamuoju užraktu, trumpi, be O žiedų 8 x universalūs atraminiai blokai 150 L – nitrituoti 4 x universalūs atraminiai blokai 225 L – nitrituoti 8 x atraminiai ir fiksavimo kampai 175 L – iš lieto metalo 2 x atraminiai ir fiksavimo kampai 500 G – kairėje, nitrituoti 1 x atraminis ir fiksavimo kampas 750 G – kairėje, nitrituotas 1 x atraminis ir fiksavimo kampas 750 G – dešinėje, nitrituotas 1 x atraminis ir fiksavimo kampas 500 G – kairėje, nitrituotas 1 x atraminis ir fiksavimo kampas 500 G – dešinėje, nitrituotas 4 x atraminiai ir fiksavimo kampai 300 G – kairėje, nitrituoti 8 x prizminiai kampai Ø60-135°, patinuoti – su kakleliu, komplekte su matomu kakleliu ir įleidžiamuoju galu 16 x profesionalios spaustuvės – nitrituotos 6 x profesionalios spaustuvės 45°/90° – nitrituotos 4 x universalūs atraminiai blokai 300 – nitrituoti 1 x priedų rinkinys, sudarytas iš: ekscentriko, šešiakampio rakto, šepetėlio, šlifavimo akmens, „CleanBasic“ mėginio, „Antihaft“ mėginio ir degiklio laikiklio.