Wohlenberg Centro Tekinimo Staklės pirkti naudotą (51 048)

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C Geometrically Overhauled with Inspection Protocol for Tolerances According to New Machine Standards Technical Data: >> Machine No. 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with Bayonet Lock >> Tailstock Morse Taper 3 >> Feeds from 0.015 to 0.46 mm/rev >> Threading Capabilities: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.18 to 28 mm >> Weight approx. 1,100 kg >> Spindle Brake Switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Ijdswrm Dtopfx Acrobc Accessories and Equipment: >> New 3-axis digital readout from K&C, 12 months manufacturer warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zero, direction of count switching >> New collet chuck setup, new collets from 3 to 26 mm (in 1 mm increments) >> 160 mm 3-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 steel tool holders >> Bed stop >> Electric chuck guard NEW >> Rear splash guard >> Operating manual >> Coolant system >> Machine mounts About the machine: Offered is a Weiler Condor 81 lead and feed screw lathe in very good geometrically overhauled condition. The guideways have been newly ground and hand-scraped. Inspection carried out according to the test protocol. Accessories such as collets and chucks are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops—an absolutely like-new lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and see the condition for yourself.

Būklė: geras (naudotas), Centre distance: 800 mm Spindle bore: 38 mm Centre height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 170 mm Spindle speed: 24-2800 rpm Dimensions: 1600 mm x 600 mm x 1250 mm Weight: 850 kg Ibodpfx Acoukrtnorsc

Būklė: labai geros būklės (naudotas), Centre height: 125 mm Centre distance: 500 mm Speed range: 45 – 3000 rpm Feed rate: 4 – 260 mm/min Spindle nose: Camlock D1-3" Tailstock taper: MK 2 Swing over bed: 250 mm Swing over cross slide: 120 mm Ibodotzxh Topfx Acrec Top slide travel: 100 mm Cross slide travel: 180 mm Dimensions (W x D x H): 1500 x 850 x 1300 mm Weight approx.: 950 kg

Būklė: labai geros būklės (naudotas), Hersteller: G.D.W. Typ: FD250 Steuerung: konventionell Arbeitsbereich: Isdow Aw H Hopfx Acrobc Spitzenhöhe: 125 mm Umlaufdurchmesser über Bett: 260 mm Umlaufdurchmesser über Planschlitten: 156 mm Spindel: Spindelbohrung: 38 mm Spindeldrehzahl: 60 - 3000 U/min (stufenlos) Verfahrwege: Längsweg: 80 mm Querverfahrweg: 80 mm Planschlitten manuell auf dem Maschinenbett beweglich. Abmessungen und Gewicht: Abmessungen: 1.300 mm x 700 mm x 1.400 mm Gewicht: ca. 510 kg Optionen/Zubehör: - Spannzangenfutter - Spannzangen - 3-Backenfutter mit Backen - Werkzeughalter - Digitales Ausmesssystem Heidenhain für 2 Achsen Unter Strom in unserem Lager.

Būklė: naujas, Bernardo Universal Lathe Solid 460 x 2000 Pro Technical Specifications - Distance between centers: 2000 mm - Center height: 230 mm - Swing over bed: 460 mm - Swing over gap: 690 mm - Swing over cross slide: 270 mm - Bed width: 300 mm - Spindle bore: 80 mm - Spindle mount: DIN 55029, D1-8 - Speed range (12): 25 – 1700 rpm - Longitudinal feed range (42): 0.055 – 3.065 mm/rev - Cross feed range (42): 0.025 – 1.386 mm/rev - Metric threads (41): 0.1 – 14 mm - Inch threads (60): 2 – 112 TPI - Tailstock quill diameter: 60 mm - Tailstock quill travel: 130 mm - Tailstock taper: MK 4 - Motor power: 5.5 kW (7.5 HP) Iedpoxl Dzajfx Acrsbc - Machine dimensions (W x D x H): 3250 x 1080 x 1600 mm - Weight: approx. 1995 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Hardened and ground gears and shafts, including in the feed gearbox • Central, user-friendly control for feeds and threads using lead and feed screws • The gears are oversized, hardened and precision-ground • Speed and feed adjustments are straightforward, smooth, and precise • Standard with rapid traverse for longitudinal and facing movements to reduce idle time • The machine bed is cast in one piece, highly torsion-resistant and low-vibration, fulfilling key requirements for precision turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. workpiece diameter 150 mm • Follow rest – max. workpiece diameter 110 mm • Quick-change toolpost with 4 holders • Safety device for quick-change toolpost • Motor with magnetic brake according to CE standards • Foot pedal with brake function according to CE • Slip clutch • Rapid traverse, longitudinal and facing • Change gears • 2 dead centers • Reducing sleeve • Thread dial indicator • LED machine lamp • Chip guard/rear splash guard • Operating tools

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Universal lead and feed screw lathe Manufacturer: WEILER Model: Primus VC Year of manufacture: 2007 – overhauled Newly painted RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Isdpfxov D Ip Ns Acrebc Spindle bore: 40 mm With warranty Geometric inspection with test protocol Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock - Motor with brake - Quick change tool post base size A - Bed stop - Covered lead and feed screw - Chip backsplash - Removable chip tray - Operating manual - Used, as seen -

Būklė: labai geros būklės (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Emcomat Emco EM20D Lead and Feed Screw Lathe Year of Manufacture 1995 Superb Condition CE Compliant!!! Technical Data: >> Year of manufacture: 1995 >> Centre height: 200 mm >> Swing diameter over bed: 400 mm >> Swing diameter over cross-slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed ranges, stepless from 35–3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev Isdpfx Acswag Stjrobc >> Installation dimensions (approx.): Length 1.900 x Depth 0.9 x Height 1.3 meters >> Weight: approx. 850 kg Accessories and Features: >> 3-axis position display >> 1 piece three-jaw chuck with 1 set of jaws >> Toolholder with 3 tool pockets >> Chip guard >> Coolant system >> Bed stop About the Machine: Offered is a Emcomat 20D lead and feed screw lathe, year of manufacture 1995, in lightly used condition. The machine is, of course, fully functional. All slides operate very smoothly and uniformly. The bed guides are in very good condition. Take the opportunity to inspect this machine under power at our premises and see its condition for yourself.

Būklė: naujas, Gamybos metai: 2025, For up-to-date pricing and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 3265 mm Width/Depth (product): approx. 1065 mm Height (product): approx. 1550 mm Weight (net): approx. 1965 kg Working Areas: Centre height: 230 mm Centre distance: 2060 mm Swing diameter over bed: 460 mm Swing diameter in gap: 690 mm Swing diameter over cross slide: 270 mm Turning length in gap: 240 mm Bed width: 300 mm Speed Range: Number of speed ranges: 12 Speed range: 25 – 2000 rpm Electrical Data: Main drive motor power: 5.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant system Coolant pump power: 125 W Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar capacity diameter: 58 mm Max. tool holder height: 25 mm Spindle taper: MT 6 Tailstock: Tailstock taper: MT 4 Tailstock quill travel: 130 mm Tailstock quill diameter: 60 mm Thread Leads: Metric pitch: 0.1 – 14 mm/rev Number of metric threads: 41 Inch pitch: 112 – 2 TPI Number of inch threads: 41 Diametral pitch: 4 – 112 DP Number of diametral threads: 50 Module pitch: 0.1 – 7 mm/rev Number of module threads: 34 Travels: Cross slide travel: 125 mm Compound slide travel: 285 mm Bed carriage travel: 1805 mm Feeds: Longitudinal feed range: 0.031 – 1.7 mm/rev Isdpfxsq Ukbpo Acrebc Number of longitudinal feeds: 42 Cross feed range: 0.014 – 0.784 mm/rev Number of cross feeds: 42 Electrical Connection: Total connected load: 5.8 kW

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Swing over bed: 500 mm Swing over cross slide: 270 mm Swing in gap: 700 mm Gap length: 357 mm Centre height: 250 mm Centre distance: 1000 mm Bed width: 340 mm Max. workpiece weight: 300 kg Spindle speed range: 22 – 2000 rpm Spindle bore: Ø 53 mm Drive power: 5.5 kW Weight: approx. 1950 kg Dimensions (LxWxH): 2550 x 1100 x 1500 mm Accessories & Equipment - 3-axis digital readout system - Chuck guard - 3-jaw chuck Ø 250 mm - 4-jaw chuck Ø 300 mm - Tool post guard - Stop for long travel slide - Fixed steady rest - Travelling steady rest - Fixed centre - Reducing adapters for main spindle - Tailstock - Coolant system - 4-way toolpost - Machine lamp - Rapid traverse on longitudinal and cross slide Iedpjwwt I Nofx Acrebc - CE marking - Operation manuals

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Maks. tekinimo skersmuo virš lovio: 330 mm Maks. tekinimo skersmuo be lovio tilto: 476 mm Maks. tekinimo skersmuo virš išilginio stalo: 198 mm Centų aukštis: 165 mm Tekinimo ilgis: 500 mm Veleno galas: D1-4/DIN55029 Veleno skylė: D38 mm Pjaunami sriegiai: metriniai, Whitworth, moduliniai Veleno apsukos: 70 – 2000 aps./min Galvutės kūgis: Morse 3 Variklio galia: 1,1/1,5 kW Staklių svoris: 500 kg Staklių matmenys: 1320 x 610 x 1400 mm Priedai, įranga: - 3 žandų D160 mm spaustukas - 4 žandų D200 mm spaustukas - 4 vietų įrankių laikiklis - Elektromechaninis veleno stabdis - Judantis ir fiksuotasis centras - Aušinimo skysčio sistema - Halogeninis darbo šviestuvas - Spaustuko apsauga - Apsauga nuo purslų - Vadovai Ibsdpfx Acsxb Axcersc Staklės yra visiškai naujos būklės. Darbo valandų: 0. Parodomosios staklės.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, veleno skylė: 40 mm, centro aukštis: 165 mm, plotis centre: 750 mm, Dear Sir or Madam, We are offering for sale a Weiler Condor B lathe. This model is particularly notable for its very user-friendly operation and an excellent ratio of space requirement to centre height/centre distance. The Condor B falls in size between the Weiler Praktikant and the Weiler Commodor, making it a true all-rounder for any workshop. The machine is being partially overhauled in our workshop, ensuring it is in excellent technical and visual condition. All guides are in good order, the gearboxes run quietly, and the levers switch smoothly. You are welcome to inspect the machine on site and judge its condition for yourself. Availability: on request Centre height: 165 mm Centre distance: 750 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Chuck mounting: Short taper DIN55027 size 5 with bayonet lock Quill stroke: 85 mm Speed range: 22–2800 rpm Thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.18 – 28 mm Spindle brake: switchable Voltage: 400 V Iedpfx Ajw N Np Sscrebc Dimensions: approx. 1.80 x 1.30 x 0.9 m (L x H x W) Weight: approx. 1100 kg Additional equipment and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop, lead & feed screw cover (optional), operating manual, and much more available on request. Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines undergo at least a workshop inspection - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine - On request, we can repaint the selected machine in your desired colour - On request, you can order further accessories such as tools directly - On request, we can install additional accessories such as safety devices - We are happy to arrange transport and/or installation for you

Būklė: naujas, Bernardo Universal Lathe Smart 410 x 1000 Pro Vario Technical Specifications Distance between centers: 1000 mm Center height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Spindle speed range, 2 steps: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2090 x 1050 x 1600 mm Weight approx.: 1145 kg Features • Supplied as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Stepless speed control with digital readout of the set speed • Prism bed made of cast iron, inductively hardened and precision ground • Central, easy-to-operate control for feeds and leadscrews with leadscrew and feed rod • Modern main spindle bearing with precision angular contact ball bearings • Standard equipment includes frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including in the feed gearbox • Simple, smooth, and precise speed and feed adjustment • Sliding tailstock for taper turning, handwheel with adjustable fine graduation (0.02 mm) • Removable gap bed allows machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Face plate 350 mm • Fixed steady rest – maximum pass-through diameter 135 mm • Traveling steady rest – maximum pass-through diameter 65 mm • Foot pedal with brake function according to CE • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Adjustable turret stop • Frequency inverter • Initial fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 center points Ibodexl Tarepfx Acrjc • Chip guard • Operating tools

Būklė: naujas, Bernardo Goliath 660 x 3000 Production Lathe including 3-Axis Digital Readout Technical Specifications Centre distance: 3000 mm Centre height: 330 mm Swing over bed: 660 mm Swing over gap*: 870 mm Swing over cross slide: 420 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1-8 Spindle speed range (16): 36 – 1600 rpm Longitudinal feed range (65): 0.063 – 2.52 mm/rev Ibjdpfexxaxnox Acrsc Cross feed range (65): 0.027 – 1.07 mm/rev Metric threads (22): 1 – 14 mm Inch threads (26): 2 – 28 TPI/1" Tailstock quill diameter: 75 mm Tailstock quill travel: 150 mm Tailstock taper: MT 5 Motor power: 9.0 kW (12.0 HP) Machine dimensions (L x W x H): 4500 x 1280 x 1650 mm Weight: approx. 3990 kg * Removable gap length: 240 mm Features • Versatile applications in general mechanical engineering, production, single-part manufacturing, etc. • The machine bed, cast in one piece, is highly torsion-resistant and vibration-damped, ensuring precise turning operations • Modern main spindle bearing with high-precision angular-contact ball bearings • Central, user-friendly lever for feeds and thread cutting, equipped with leadscrew and feed rod • Standard with rapid traverse (longitudinal and cross) to reduce non-productive times • The gears are large-sized, hardened, and precision ground • The removable gap bridge enables machining of large-diameter workpieces • Traverseable tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Electromechanical foot brake for reduced auxiliary times • Excellent cutting performance also in facing operations Scope of Delivery • Slip clutch • Rapid traverse (longitudinal and cross) • LED machine lamp • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-315 mm / D8 • Face plate 630 mm • Fixed steady rest – max. 250 mm diameter capacity • Travelling steady rest – max. 110 mm diameter capacity • 1 centre / 1 revolving live centre • Motor with magnetic brake in accordance with CE standards • Foot pedal with brake function according to CE • Initial fill with Shell Tellus 46 • Coolant system • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Reducing sleeve • Chip guard (rear) • Operating tools

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 90 mm, tekėjimo skersmuo: 630 mm, tekinimo skersmuo virš slankiojančio stalo: 630 mm, tekinimo skersmuo virš viršutinio vežimo: 380 mm, tekėjimo ilgis: 3 000 mm, quill skersmuo: 90 mm, bendras ilgis: 4 900 mm, bendras plotis: 1 420 mm, bendras aukštis: 1 590 mm, sukimosi greitis (maks.): 1 800 aps./min, sukimosi greitis (min.): 18 aps./min, bendras svoris: 3 700 kg, ruošinio svoris (maks.): 1 500 kg, veleno tvirtinimas: MK 6, The FAT TUR 630M/3M universal lathe has been comprehensively rebuilt and modernized by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, meets the technical inspection requirements of the WOT and Polish standards, and also complies with EU regulations. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: in stock, powered up, ready for technical inspection. Technical specifications: - Distance between centers/turning length: 3000 mm - Swing over bed: 630 mm - Swing over cross slide: 380 mm - Spindle bore diameter: 90 mm - Maximum workpiece weight between centers: 1500 kg - Number of spindle speeds: 21 - Spindle speed range (rpm): 18 - 1800 Ijdpfxjd Eaa Ee Acrjbc - Feed range (mm/rev): Longitudinal: 0.05 – 3.26 Cross: 0.25 – 1.63 - Motor power: 15 kW - Overall dimensions: Overall length: 4900 mm Width: 1420 mm Height: 1500 mm Total weight: 3650 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at additional cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 10-140 mm, with rollers - Steady rest 10-180 mm, with rollers - Steady rest 140-300 mm, with rollers - MULTIFIX quick-change toolpost

Būklė: naujas, Bernardo Universal Lathe Solid 460 x 1500 Pro Technical Specifications - Distance between centers: 1500 mm - Center height: 230 mm - Swing over bed: 460 mm - Swing over gap: 690 mm - Swing over cross slide: 270 mm - Bed width: 300 mm - Spindle bore: 80 mm - Spindle mount: DIN 55029, D1-8 - Spindle speed range (12): 25 – 1700 rpm - Longitudinal feed range (42): 0.055 – 3.065 mm/rev - Cross feed range (42): 0.025 – 1.386 mm/rev - Metric threads (41): 0.1 – 14 mm - Inch threads (60): 2 – 112 TPI - Quill diameter: 60 mm - Quill travel: 130 mm - Quill taper: MT 4 - Motor power: 5.5 kW (7.5 HP) - Machine dimensions (W x D x H): 2750 x 1080 x 1600 mm - Weight approx. 1845 kg Features - Modern main spindle bearing with precision angular contact ball bearings - Hardened and ground gears and shafts, including in the feed gearbox - Central, easy-to-use control for feeds and threads with leadscrew and feed rod - Large, hardened, and precision ground gears - Simple, smooth, and precise speed and feed adjustment - Rapid traverse longitudinally and crosswise as standard to reduce non-productive time - The machine bed, cast in one piece, is extremely torsion-resistant and low in vibration, providing the basis for precise turning Isdexl Dyvepfx Acrobc Scope of Supply • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Faceplate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. pass-through diameter 150 mm • Travelling steady rest – max. pass-through diameter 110 mm • Quick-change toolpost with 4 holders • Safety guard for quick-change toolpost • Motor with magnetic brake to CE standard • Foot pedal with brake function to CE • Slip clutch • Rapid traverse longitudinally and crosswise • Change gears • 2 centres • Reducing sleeve • Threading dial • LED machine light • Chip guard (rear) • Operating tools

Būklė: naujas, Bernardo Universal Lathe Solid 460 x 1000 Pro Vario Technical Specifications Centre distance: 1000 mm Centre height: 230 mm Swing diameter over bed: 460 mm Swing diameter over gap: 690 mm Swing diameter over cross slide: 270 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feed range (42): 0.055 – 3.065 mm/rev Cross feed range (42): 0.025 – 1.386 mm/rev Ibedpfx Acexl Tcasrsc Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill stroke: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2300 x 1080 x 1600 mm Weight approx.: 1730 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Equipped as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Stepless speed control, with digital speed display • Hardened and ground gears and shafts, including the feed gearbox • Standard rapid traverse in longitudinal and cross directions to reduce non-productive time • Central, user-friendly control for feeds and threads, with leadscrew and feed rod • Large-dimensioned, hardened and precision-ground gears • Simple, smooth, and precise speed and feed setting • The machine bed, cast in one piece, is extremely torsion-resistant and low in vibration, providing the basis for precise turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. workpiece diameter 150 mm • Travelling steady rest – max. workpiece diameter 110 mm • Initial fill with Shell Tellus 46 • Faceplate 450 mm • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Foot pedal with CE brake function • Coolant system • Frequency inverter • Slip clutch • Rapid traverse, longitudinal and cross • Change gears • Reducing sleeve • 2 centre points • Thread indicator • LED machine lamp • Chip guard • Service tools

Būklė: geras (naudotas), 1 naudotas atraminis ir vilkimo verpstės tekinimo staklės Gamintojas: Weiler Modelis: Condor VS 2 Techniniai duomenys: Centrų aukštis: 160 mm Centrų atstumas: 800 mm Verpstės skylė: 40 mm Lovos plotis: 240 mm Sukimosi greitis: 12–2800 min-1 Variklio galia: 3 kW Galinis staliukas: MK 3 Pinolės eiga: 110 mm Padavimas: 0,037–1,253 mm/aps Ijdpsw Rcrcjfx Acrebc Svoris, apie 800 kg Matmenys (PxGxA), apie 1930 x 880 x 1470 mm Įranga: Trijų žandikaulių griebtuvas Greitai keičiama laikiklių sistema Multifix

Būklė: dilaminuotas dirbtuvėje (naudotas), Precision lead and feed screw lathe Manufacturer: GDW Model: LZ 250 S Year of manufacture: 1998 – overhauled, newly painted RAL7035 light grey Machine no.: 069 Centre height: 125 mm Centre distance: 500 mm with warranty Geometric inspection with test report Iodpjpz Hubsfx Acrebc Accessories: - 3-axis digital readout ISKAR NP-20T-V with V = c for constant cutting speed - Quick-change tool post, base body size A - Bed stop - Coolant system - Chuck guard hood, electrically interlocked - Swarf guard at the rear - Operating manual - Used, sold as seen -

Būklė: naujas, Bernardo Universal Lathe Solid 460 x 2000 Pro Vario Technical Specifications Center distance: 2000 mm Center height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 274 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Spindle speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feed range (42): 0.055 – 3.065 mm/rev Cross feed range (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill travel: 130 mm Ibjdpfx Asxl Tcmjcrec Quill taper: MK 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 3250 x 1080 x 1370 mm Weight approx.: 2030 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Standard Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, selected speed displayed digitally • Hardened and ground gears and shafts, including in the feed gearbox • Rapid traverse longitudinally and crosswise as standard, reducing non-productive time • Central, easy-to-use control for feeds and threads, with lead screw and feed shaft • Oversized, hardened, and precision-ground gears • Simple, smooth, and precise speed and feed adjustments • One-piece machine bed casting for high rigidity and low vibration, ensuring high turning accuracy Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. passage diameter 150 mm • Travelling steady rest – max. passage diameter 110 mm • First fill with Shell Tellus 46 • Face plate 450 mm • Quick-change tool post with 4 holders • Safety device at quick-change tool post • Foot pedal with brake function, CE compliant • Coolant system • Frequency inverter • Safety clutch • Rapid traverse longitudinally and crosswise • Change gears • Reducing sleeve • 2 dead centers • Thread dial indicator • LED machine lamp • Chip guard/rear splash guard • Operating tools

Būklė: naujas, Bernardo Universal Lathe Smart 410 x 1500 Pro Vario Technical Specifications Centre Distance: 1500 mm Centre Height: 210 mm Swing Diameter over Bed: 420 mm Swing Diameter over Gap: 580 mm Swing Diameter over Cross Slide: 255 mm Bed Width: 250 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1 – 6 Speed Range, 2 Steps: 30 – 550 / 550 – 3000 rpm Longitudinal Feed Range (17): 0.05 – 1.7 mm/rev Cross Feed Range (17): 0.025 – 0.85 mm/rev Metric Threads (42): 0.2 – 14 mm Imperial Threads (45): 2 – 72 TPI Quill Diameter: 50 mm Quill Travel: 140 mm Quill Taper: MK 4 (Morse Taper 4) Ibodsxl Ta Sjpfx Acroc Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (W x D x H): 2590 x 1050 x 1600 mm Weight: approx. 1325 kg Features • Standard equipped with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, set speed is displayed digitally • Prism bed made of cast iron, induction hardened and precision ground • Central, easy-to-use feed and thread controls with leadscrew and feed rod • Modern main spindle bearing with precision angular contact ball bearings • Standard with frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, also in the feed gearbox • Speed and feed setting is simple, smooth and precisely switchable • Adjustable tailstock for taper turning, handwheel with adjustable fine graduation (0.02 mm) • Removable bridge allows machining of large diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. passage diameter 135 mm • Travelling steady rest – max. passage diameter 65 mm • Foot pedal with brake function (CE compliant) • Four-way tool post • Safety device for four-way tool post • Micrometer longitudinal stop • Indexing stop with fine adjustment • Frequency inverter • Initial fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 live centers • Chip guard/rear splash guard • Operator tools

Būklė: naujas, Bernardo Universal Lathe Smart 410 x 1500 Pro Technical Specifications Centre distance: 1500 mm Centre height: 210 mm Swing diameter over bed: 420 mm Swing diameter over gap: 580 mm Swing diameter over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range (16 steps): 45 – 1800 rpm Longitudinal feed range (17 steps): 0.05 – 1.7 mm/rev Cross feed range (17 steps): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 3.0 / 4.5 kW Machine dimensions (W x D x H): 2570 x 900 x 1600 mm Weight approx.: 1400 kg Product Features • Prism bed made from cast iron, induction-hardened and precision ground • Electromechanical foot brake for reducing downtime • Central, ergonomic control for feeds and threads with leadscrew and feed rod • Modern main spindle bearings with precision angular contact ball bearings • Large-dimensioned, hardened, and precision ground gears • Hardened and ground gears and shafts, also in the feed gearbox • Speed and feed settings are straightforward, easy to operate, and precise • Sliding tailstock for taper turning – handwheel with adjustable fine scale (0.02 mm) • Removable bridge for machining workpieces with large diameters Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. passage diameter 135 mm • Travelling steady rest – max. passage diameter 65 mm • Coolant system • Four-way tool post • Safety cover for four-way tool post • Micrometer longitudinal stop • Slip clutch • Precision turret stop • Thread chasing dial • Motor with magnetic brake in accordance with CE standards • Foot pedal with braking function to CE standards • First fill with Shell Tellus 46 • LED machine lamp • Change gears • Reducing sleeve • 2 centre points • Chip guard rear wall Iedpfxsxl Dwus Acrjbc • Operating tools

Būklė: paruoštas naudoti (naudotas), Lathe machine, manufacturer Takisawa, model TAL 510, with chuck, quick-change tool holder, and live center. Ijdpfx Acovyuuqorobc

Gamybos metai: 1967, būklė: naudotas, Apvalaus judesio skersmuo virš staklių lovio: 540 mm, apvalaus judesio skersmuo virš atramos: 280 mm, didžiausias apatinės slanklės eigos ilgis: apie 410 mm, didžiausias viršutinės slanklės eigos ilgis: apie 140 mm, atraminio kūgio eigos ilgis: 225 mm, pagrindinio veleno greičio diapazonai: 24, greitis: 9–1400 aps./min., 32 išilginiai poslinkiai: 0,063–2,24 mm/aps., 32 skersiniai poslinkiai: 0,032–1,12 mm/aps., metrinis sriegio žingsnis: 0,25–560 mm, modulio sriegio modulis: 0,1–50, diametrinio sriegio žingsnis: 160–0,5, aukštis virš plokščiosios paviršiaus: 265 mm, aukštis virš prizminio paviršiaus: 247 mm, lovio plotis: 403 mm, pagrindinis velenas su veleno galvute pagal DIN 55022: dydis 11, veleno kiaurymė: 103 mm, vidinis kūgis 1:20, didžiausias skersmuo: 109 mm, Morse kūgis centro kūgiams: Nr. 5, vedančiojo sriegio žingsnis (normalus): 12 mm, atraminio kūgio skersmuo: 80 mm, normali variklio galia: 18,5 kW, variklio flanšo apkrova esant vardiniam greičiui: 1400 aps./min., tekinimo įrankio skerspjūvis pagal DIN 770: 25x25 mm, didžiausias disko skersmuo: 500 mm, didžiausias trijų ir keturių žandikačių laikiklio skersmuo pagal DIN 6350: 315 mm, svoris: 3 t, su darbo lempute, aušinimo skysčio tiekimo sistema su pjuvenų surinkimo padėklu, keturių žandikačių plieninis laikiklis su galiniu dantračiu, skirtas valdyti viena ranka ant viršutinės slanklės, naudojimo instrukcija ir tvirta atrama. Galimas apžiūrėti vietoje. Ibodpfx Aozzqblscrec

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1965, Funkcionalumas: visiškai funkcionalus, veleno skylė: 62 mm, tekėjimo skersmuo: 580 mm, centro aukštis: 275 mm, plotis centre: 2 000 mm, bendras ilgis: 4 000 mm, bendras plotis: 1 250 mm, bendras aukštis: 1 300 mm, bendras svoris: 3 400 kg, Dear Sir or Madam, For sale is a fully functional lathe of the type Schaerer UDA560, including a steady rest, several tool holders, and technical documentation. Availability: Immediately Year of manufacture: 1965 Centre height: 275 mm Centre distance: 2,000 mm Spindle bore: 62 mm Iedpfxou St Rrs Acrobc Maximum turning diameter: 580 mm Maximum turning diameter in the gap: 630 mm Space requirement: 4.00 x 1.25 x 1.30 m (LxWxH) Weight: approx. 3,400 kg Accessories: various tool holders, steady rest, machine card

Būklė: naujas, Precision gap bed lathe with leadscrew and feed rod Make: GDW Model: LZ 400 V economyline Condition: New machine with infinitely variable speed control meeting the highest safety standards Centre height: 200 mm Distance between centres: 1,000 mm Spindle bore: 62 mm Standard equipment includes: -- 3-axis digital readout, 7" colour display with constant surface speed - Integrated LED machine lamp in machine enclosure - Electromechanical limit switch system for thread cutting and feed operations Ijdpfx Aexg Emyecrsbc - Quick-change toolpost size B with turning tool holder - Main drive braking system (spindle brake) - Sliding chuck guard with safety interlock - Removable chip guard rear panel - Sliding splash guard - Removable chip tray - Simple bed stop - Centralised lubrication - Set of change gears (tooth counts 21-33-84-120) - Reducing sleeve for main spindle internal taper ME 70/MK 4 - Protective flange for spindle nose DIN 55027-6 - Additional service socket - 2 fixed centres DIN 806-MK 3 - Set of operating tools, keys and oil gun - Spare shear pins - Operating manual including spare parts list and electrical documentation