Sac Lv/150 pirkti naudotą (11 680)

Būklė: naudotas, Gamybos metai: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -T6: internal grinding attachment -T7: internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP control on T1 and T2 by ELASO (contactless), integrated into the control interface -GAP control on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock, hydraulic with fine adjustment +/-150 µm -Dressing device on the lower table, workpiece spindle side -Dressing device on the lower table, tailstock side -Dressing device on the upper table -New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece headstock with direct drive *highly recommended for non-circular grinding *max. workpiece weight, between centers: 150 kg *max. workpiece weight, overhung: 75 kg *water-cooled *Morse taper 5 combined with short taper mount to DIN 55026 *spindle orientation stop *fixed lower section B-axis with direct drive, center height 225 mm *extremely torsion-resistant *high positional accuracy *resolution ° *water-cooled MECHANICAL OVERHAUL: - Complete machine overhauled according to Kellenberger measurement protocol - New paintwork New hydraulic unit: - Improved temperature control (oil cooler) - Energy-saving: only one pump, and not running continuously! - Pressure monitoring - Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X axis - Wear-free, since no contact during operation - No loss of accuracy, even during prolonged operation under full load at maximum speed - Friction-free at low speeds - No reversal jump of friction force when changing direction - Transmits smallest rotational movements - No stick-slip effect even at low speeds - No fluctuation in friction torque due to recirculating balls - Higher axial stiffness than ball screw drives - Significantly better damping, leading to improved workpiece surface and longer tool life - No vibrations due to recirculating balls - Also suitable for high speeds and accelerations - Cost-effective alternative to linear motors, offering higher accuracy and much less heating - Much lower power loss and thus no swarf issues on permanent magnets - Much lower cooling requirements compared to linear motors ELECTRICAL OVERHAUL: -New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface -Newly constructed control cabinet -New drive technology -Replacement of all electrical wiring (Berus pressure switches etc.) -New absolute glass scales in X and Z Laodpfx Akeuxfu Nshoc -New absolute encoder (for B-Axis) CONTROL SYSTEM: The grinding software consists of a base license and various options, depending on the machine configuration. Software base functions: - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillation grinding - Workpiece...

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight: approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle refurbishers - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor are electrically interlocked! Internal grinding spindle can only be activated when in position. A quantum leap in safety technology. - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of grinding spindle speeds - Swivel angle display for the upper table - Swivel angle display for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid contact sensor for internal grinding - Centre height up to 250 mm possible The machine is already delivered. An identical machine can be configured with additional options. Lodpfx Aet Ii Rrjkhjac The machine tool currently does not comply with the fundamental safety and protection requirements as stipulated in the German Operational Safety Ordinance (BetrSichV) 2015. An increase of the required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Grinding diameter 350 mm Lasdpfx Akot Ii Rfjhjc Grinding length 1500 mm Centre height 175 mm Left wheel 600 mm Grinding spindle head fixed, non-rotatable. Equipped with new FAGOR control system featuring BEMA cylindrical grinding interface. With new service-friendly enclosure. Completely overhauled according to Kellenberger measurement protocol.

Būklė: naujas, Gamybos metai: 2025, Valve bag packer including load cells for dosing and packing bulk materials and granulates, such as grain or pellets. The AMTEC valve bag packing machine can fill up to 25 kg of bulk material into valve bags. Dosing is controlled via load cells. — Specifications: Weighing range: max. 25 kg; max. machine cycle rate (idle): 150 cycles/hour; accuracy: +/- 0.5% FS; compressed air: 4-6 bar; power: 380/220V, 3-phase; all parts in contact with the product are made of stainless steel 304. Lajdpfx Akov Nm D Ashec Please note that our new machine prices are often below standard used equipment prices. Feel free to contact us and let us know your packaging requirements. – Usually, we have 30-50 different new machines available from stock at all times. For custom-built machines, we offer very short delivery times starting at around 3 weeks. – All machines come with a full warranty.

Būklė: geras (naudotas), Gamybos metai: 1979, Veleno skersmuo: 30 mm Sūkių rėžiai: 2.800 – 4.500 – 6.500 – 10.000 aps./min. Variklis: 10 AG Stalo matmenys: 1.100 x 1.000 mm Ištraukimo antgalio skersmuo: 2 x 120 mm Svyruojanti zona: nuo -5 iki +45 laipsnių Maks. veleno eiga: 130 mm Įvairūs įrankiai už papildomą kainą Ledpfx Akoxran Noheac Įskaitant 4 ritinėlių padavimo įrenginį HOLZHER Type 1112, su 4 greičiais pirmyn ir atgal Savarankiškai pagaminti stalo prailginimai dešinėje ir kairėje pusėje Su įrankiais pagal nuotrauką

Būklė: labai geros būklės (naudotas), rida: 100 km, galia: 110 kW (149,56 AG), pirmoji registracija: 12/2024, kuro tipas: dyzelinas, ašių konfigūracija: 4x2, ratų bazė: 3 590 mm, kuras: dyzelinas, spalva: balta, vairuotojo kabina: dieninė kabina, pavaros tipas: mechaninis, pavarų skaičius: 6, emisijos klasė: Euro 6, sėdimų vietų skaičius: 3, bendras ilgis: 5 690 mm, bendras plotis: 2 080 mm, bendras aukštis: 2 500 mm, leistina ašies apkrova (ašis 1): 1 950 kg, leistina ašies apkrova (ašis 2): 2 000 kg, Gamybos metai: 2024, Įranga: ABS, Apple CarPlay, centrinis užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, kruizo kontrolė, oro kondicionavimas, priekabos jungtis, priešrūkiniai žibintai, stumdomos durys, trauki kontrolė, vairo stiprintuvas,

Būklė: nepatikrintas (naudotas), Gamybos metai: 1984, Connected load: 380V 9A Motor power: 4 kW Cutting height: 460 mm Cutting width: 770 mm Extraction port: 120 mm Lasdpfx Akjvt Ttljhoc Machine height: approx. 2500 mm Panhans band saw guide, top and bottom Saw blade length: 5700 mm

Būklė: labai geros būklės (naudotas), Debag Monsun elektrinė krosnis, skirta 12 kepimo skardų 60x80 cm, su 2 skardų vežimėliais. Prieš metus atnaujinta, krosnis vis dar veikianti. Prisijungimas: 64 A, galia: 32 kW. Dėl papildomos informacijos skambinkite arba rašykite el. paštu. Iš anksto dėkoju. Laodpfx Asdc Eigjkhoc

Būklė: naudotas, Gamybos metai: 2003, with electronic rip fence and large cutting width of 1500 mm Used, excellent condition, premium features Manufacturer SAC Model CS 450 Year of manufacture: 2003 Machine no. LD 2206 CE type-approved Motor 5.5 kW Steel guides Carriage length approx. 3200 mm Cutting width approx. 1550 mm Max. blade diameter 450 mm Lajdevyd Dbjpfx Akhjc tiltable up to 45° scoring unit Operator panel swiveling at the top Rip fence with automatic control Table extension approx. 940 mm x 650 mm Electric height adjustment 3-axis positioning control Digital display: - Height - Cutting angle - Rip fence - Speed Extraction connection D 100 mm/120 mm Required space approx. 3400 mm x 3700 mm x 1800 mm Weight approx. 1500 kg Total connected load approx. 6.25 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-is condition as inspected, without overhaul, without guarantee or warranty

Būklė: naudotas, Gamybos metai: 1993, ANGULAR PROFILING MACHINING CENTER Brand: SAC Model: P4 Lodpfx Aorx Tcgekhoac Serial number: 9304 Year: 1993 Model: F5 Serial number: 93030 Year: 1993 Machines available for inspection at our workshop SPECIFICATIONS: - Cutter spindle speed: 6000 rpm

Būklė: naudotas, Gamybos metai: 1998, mašinos/transporto priemonės numeris: 9813, FIXED-SHAFT SPINDLE MOULDER SAC SUERI MOD. TS110 - CE COMPLIANT - USED - Extended tables 2400 mm - Voltage: 400/50 - Serial no.: 9813 - Year: 1998 - *M42 Lasdpfewrh Hvsx Akhsc - Complete with manual and CE declaration

Būklė: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AA0985, įėjimo įtampa: 400 V, KALIBRAVIMO ŠLIFAVIMO APARATAS VIRŠUS-APAČIA SAC MOD. 4R 300 – PAGAL CE REIKALAVIMUS Ljdpsx Riccjfx Akhoac - Darbo plotis 300 mm - Maks. aukštis 150 mm - Min. aukštis 5 mm - Minimali ruošinio ilgis 240 mm - 2 viršutiniai volai – ø 254 mm - 1 viršutinė šepetė - 2 apatiniai volai – ø 254 mm - 1 apatinė šepetė - Padavimo greitis 4–16 m/min - 4 varikliai po 4 kW kiekvienas - Įtampa 400/50 - Gamybos nr. AA0985 - Metai 2001

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, FOD BYDGOSZCZ* DPPD III 50E 530/150 Shaft Multi-blade Saw Catalogue No. 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum workpiece width: 700 mm - Working shaft width with saws: 530 mm - Maximum saw blade diameter: 450 mm (350 mm currently installed) - Blade bore diameter: 90 mm From above: - Anti-kickback pawls - 2 driven, toothed feed rollers From below: - 2 driven, smooth feed rollers - Saw shaft - Driven, smooth feed roller - 4 feed speed options - Feed motor approx. 2 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2400x1700x1900 mm - Weight: approx. 3000 kg – Made in Poland Ljdpfey Rrywex Akhjac – Used machine, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorised representative of the manufacturer. All trademarks and names are used for informational purposes only, to assist in product identification. We only resell goods previously placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1990, - LEDINEK BSG 150 galvučių galąstuvas su peilių reguliavimo įrenginiu - sandėlyje - Slovakijos gamyba TECHNINIAI DUOMENYS variklio galia: 0,55 kW Ledpjihpl Rjfx Akhoac galąstuvo ilgis: 440 mm įrankių skersmuo: 125 mm - 203 mm rankinis padavimas veleno skersmuo: 50 mm peilių reguliavimo įrenginys Staklių išmatavimai: 120 / 85 / 165 cm svoris: 400 kg

Būklė: labai geros būklės (naudotas), For sale: Esab LTG150 welding machine in very good condition. Lasdpfx Aju Sun Eskhjc

Būklė: geras (naudotas), Gamybos metai: 1994, For sale: Tampoflex Jumbo 150-400 pad printing machine, year of manufacture 1994. Fully functional and in good condition. Laodpfev Eqatex Akhsc

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Parduodamos naudotos Maguire gamintojo plastiko džiovyklės. Skelbimas apima iš viso 13 įrenginių, kuriuos galima įsigyti tiek po vieną, tiek didesniu paketu. Siūlomos Low Pressure Dryer (žemo slėgio) ir Vacuum Batch Dryer (vakuminės partinės / vertikalios) džiovyklės. Būklė matoma nuotraukose. Kaina priklauso nuo pasirinkto įrenginio ir kiekio. Džiovyklės skirtos plastiko granulių džiovinimui. Įrenginiai naudoti, techninis ir vizualinis stovis atitinka nuotraukas. Papildomų konkrečios džiovyklės nuotraukų galiu atsiųsti pagal užklausą. Galimi įrenginiai: Nr. Pažymėjimas Tipas / modelis nuotraukose Laodpfxszc D Ebj Akhsc 1 D067 Maguire Low Pressure Dryer, modelis LPD2HE4 2 D049 Maguire Low Pressure Dryer, modelis LPD1HE4 3 D084 Maguire Low Pressure Dryer 4 D099 Maguire Low Pressure Dryer, modelis LPD1HE4 5 D054 Maguire Low Pressure Dryer, modelis LPD1HE4 6 D051 Maguire Low Pressure Dryer, modelis LPD1HE4 7 D065 Maguire Low Pressure Dryer, modelis LPD1HE4 8 D071 Maguire Low Pressure Dryer, modelis LPD1HE4 9 D068 Maguire Low Pressure Dryer, modelis LPD2HE4 10 D076 Maguire Vacuum Batch Dryer, modelis VBD-150 11 D081 Maguire Vacuum Batch Dryer, modelis VB-150 12 D089 Maguire Vacuum Batch Dryer, modelis VB-150 13 D091 Maguire Vacuum Batch Dryer, modelis VB-150

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, KATALOGO NUMERIS 7880 Techniniai duomenys: - maksimalus pjovimo aukštis 150 mm - maksimali ruošinio plotis 500 mm - darbinis veleno, su pjūklais, plotis 400 mm - veleno skersmuo 70 mm - maksimali pjūklo skersmuo 450 mm - iš viršaus: - atatrankos stabdžiai - 2 traukimo velenai, dantyti – spaudžiami pneumatiniu būdu - iš apačios: - slydimo volas - atatrankos stabdžiai - 2 dantyti traukimo velenai - velenas su pjūklais - 2 dantyti traukimo velenai - tolydi padavimo greičio reguliacija per dažnio keitiklį - padavimo variklis 3 kW - pagrindinis variklis 55 kW - bendri matmenys (I x P x A) 2120x1600x1630 mm - svoris apie 2750 kg PRIVALUMAI – pagaminta Lenkijoje – tvirta konstrukcija Laodozcck Ajpfx Akhjc – naudota mašina, labai gera būklė Neto kaina: 55.900 PLN Neto kaina: 13.310 EUR pagal 4,20 EUR kursą (Kainos gali keistis esant didesniems svyravimams)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, Arburg 570C 2000-350/150 / Production line with lateral Arburg Multilift robot / 2K machine Year of manufacture: 2003 Injection unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2120 bar Dosage volume: 182 ccm Clamping unit: Clamping force: 200 t Tie bar distance: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Lsdpfx Aszc N Twokhsac Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with lateral Arburg Multilift robot 2K machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner interface Reinforced injection units – bimetallic Proportional valves on injection units – for precise dosing Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All offered machines are started up by our service technicians before delivery. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Arburg 470C 1500-150/150 / 2-component injection moulding machine / Machine in very good technical condition Year of manufacture: 2005 Injection Unit: Screw diameter: 25 mm Shot weight: 49 g Injection pressure: 2500 bar Dosage volume: 54 ccm Lsdpfszc N Izjx Akheac Clamping unit: Clamping force: 150 t Tie bar distance: 470 x 470 mm Platen size: 685 x 685 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: 2-component machine Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hardened injection unit – bimetallic Proportional valve on the injection unit – precise injection Type of injection unit: Vario – allows for e.g. lateral injection Parallel movements Vertical injection unit – screw diameter fi 25 mm (49 g/PS) It is possible to change the screw diameter in both injection units for the diameters recommended by the manufacturer: 30, 35 mm Dimensions: Weight: 5,700 kg Drive: Pump/motor: 30 kW Heating capacity: 2 x 9.4 kW Total power: 48.8 kW All machines offered are started and checked by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Arburg 420C 1000-350/150 / Gamybos linija su šoniniu Arburg Multilift H robotu / 2K mašina Pagaminimo metai: 2009 m. spalio mėn. Įpurškimo agregatas: Laodpfszc N Etox Akhjc Sraigto skersmuo: 45 mm Įpurškimo svoris: 210 g Įpurškimo slėgis: 1670 bar Dozavimo tūris: 230 ccm Uždarymo agregatas: Uždarymo jėga: 100 t Kolonų atstumas: 420x420 mm Plokščių dydis: 570x570 mm Išstūmiklis: hidraulinis Uždarymo agregatas: hidraulinis Valdymas: SELOGICA Papildoma įranga: Gamybos linija su šoniniu Arburg Multilift H robotu 2K mašina su pasukamu stalu Valdymas su oro vožtuvu Hidraulinis šerdies ištraukimas x 2 Valdymas su karštųjų kanalų sistema Sustiprinti įpurškimo agregatai – bimetalas Proporciniai vožtuvai įpurškimo agregatuose – itin tikslus įpurškimas Vertikalus įpurškimo agregatas – sraigto skersmuo: ⌀30 mm – 71 g/PS Pasukamas stalas už papildomą kainą Šoninis Arburg Multilift H robotas Pagaminimo metai: 2009 5 ašių robotas: Z ašis varoma servovarikliu (elektrinė), X-, Y-, B- ir C-ašys pneumatiniu būdu Roboto saugos paketas Robotas su adapteriu, konvejeriu, apsauginiu gaubtu Roboto ir konvejerio įsigijimas už papildomą kainą Matmenys: Svoris: 5210 kg Visos siūlomos mašinos prieš pardavimą paleidžiamos mūsų technikų. Galima gauti pasirinktos įrangos techninių bandymų vaizdo įrašą arba dalyvauti techniniuose tiesioginiuose bandymuose mūsų įmonėje Lodzėje. Kaina: pagal užklausą

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid machine / Operating hours: approx. 29,000 in automatic operation Year of manufacture: 2014 Injection Unit: Screw diameter: 50 mm Shot weight: 402.2 g Injection pressure: 1714 bar Dosage volume: 442 cm³ Clamping Unit: Clamping force: 150 t Tie bar spacing: 520x470 mm Platen size: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6P - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total operating hours: 36,714 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Main drive motor – servo motor powered by inverter – energy saving Dimensions: Ljdpfjzc Nuhjx Akhsac Weight: 6,600 kg Length/Width/Height: 4.82x1.42x2.20 m All listed machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Battenfeld VM 150/525 R1280 Servo Power / Vertical injection molding machine with rotary table Year of manufacture: 2015 Injection unit: Screw diameter: 35 mm Shot weight: 175.6 g Injection pressure: 2743 bar Metering volume: 193 cc Clamping unit: Clamping force: 150 t Tie bar distance: 0x0 mm Platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Vertical injection molding machine with rotary table Hybrid machine: high-speed, energy-saving, and very quiet Air valves x 5 Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and corrosion-resistant Rotary table diameter: 1500 mm Rotary table driven by a servomotor, controlled by a frequency inverter Dimensions: Weight: 11,300 kg Length/Width/Height: 3.83x1.50x4.07 m All machines offered are started up and checked by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request Lsdpfx Akozc Nubehsac

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Ferromatik Milacron Magna T(MTs) 150-450 / Production line with Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt, and safety enclosure / Machine in very good technical condition Year of manufacture: 2017 Injection Unit: Screw diameter: 45 mm Shot weight: 215 g Injection pressure: 1984 bar Dosage volume: 226 cc Clamping Unit: Clamping force: 150 t Tie bar spacing: 510x510 mm Platen size: 740x740 mm Ejector: hydraulic Clamping system: toggle Control system: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner control unit x 36 (available at extra charge) Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - servo motor driven by inverter Central lubrication Machine with cylinder/battery with compressed nitrogen (additional charge for fast operation) Wemo 6-5 xDesign Robot Year of manufacture: 2017 4-axis robot: 3 axes powered by servo motors (electric) Safety package for robot Robot with adapter, Wemo WCS-R conveyor, and safety enclosure Purchase of the robot and conveyor at an additional cost Dimensions: Weight: 7500 kg Length/width/height: 6.10 x 1.97 x 2.60 m Drive: Pump/motor: 11.5 kW Heating capacity: 11.3 kW Total power: 22.8 kW All offered machines are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company site in Łódź. Lasdezc Nrtopfx Akhoc Price: 25,000.00 EUR net (price without robot)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Arburg 1200T 800-150 / Vertical Injection Moulding Machine with Rotary Table Year of manufacture: 2005 Injection Unit: Screw diameter: 25 mm Shot weight: 45 g Injection pressure: 2500 bar Dosage volume: 54 cc Clamping Unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Platen size: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional Equipment: Air valve x 6 Hydraulic core pull x 6 Hot runner control system Injection unit hardened – bimetallic Rotary table diameter: 1200 mm Kistler sensor – mould pressure monitoring Machine has been serviced by authorised Arburg service in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92x1.61x3.78 m Drive: Pump/motor: 22 kW Heating capacity: 9.4 kW Total connected load: 31.4 kW Ljdpfx Aezc Nqcskhoac All machines offered are started and tested by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request.