Platintojas pirkti naudotą (7 713)

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm Iodpfx Aoqlck Noateaw • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: Isdpfx Aasqlckpjtjaw It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander including Intermediate Paint Sanding Configuration Special Price for Showroom Model - Trade Fair Machine - - Robust, space-saving wide belt sander for the highest demands - Consistent working height thanks to top section adjustment - Working width: 1350 mm - Top sanding, equipped with 2 sanding units - Grooved rubber contact roller with proven hardness - Stepless height adjustment of the contact roller according to a sanding grit scale - Electric raising/lowering of the contact roller according to selected aggregate - Electronically controlled segmented sanding pad - Complete sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at infeed - Rubber-coated pressure roller between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized fine height adjustment with digital display - Pneumatic belt tensioning, control, and oscillation Compressed air consumption approx. 2 l/min - Optimum safety due to automatic instant stop with disc brake in the event of belt breakage, etc. - Workpiece feed: 2.2 kW with transport belt and drive roller - Vacuum system for the entire worktable with additional 200 mm perforation for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece thickness overrun protection with instant feed stop and automatic lift - Stepless regulation of material removal - Electronic feed speed control at the operator panel, stepless 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor belt control - Workpiece support with roller at infeed and outfeed - Enormatic: Fully automated quick setup and feed release - Eco energy-saving mode - Fault diagnosis - Pass-through height 210 mm up to 18.5 kW - Sanding belt dimensions: 1350 x 2000 mm Perfect - Features: Iajdpsk Dpp Ssfx Aatow High quality, swiveling plexiglass control panel - 10" Touch Screen - Industry controller - Automatic pressure regulation and memory function of the sanding pad segments - Electronic compensation for sanding belt grit size - Job and operating hour counters Lacquer Configuration - Stepless adjustment of the sanding belt speed on the 2nd aggregate - Nozzles for automatic sanding belt cleaning on the 2nd aggregate - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Fold-down outfeed table extension (without plate) C10) LED package ASB5+AS3) ECS workpiece air blast system with fan Location: 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2025, Naujas įrenginys Pagaminimo metai: 2025 Įranga ir techniniai duomenys: MODELIS Excel 2NRKRT DVIPJUOSTĖ MAŠINA 1. JUOSTA – KALIBRAVIMO VOLELIS, 2. JUOSTA – KOMBINUOTAS AGREGATAS VOLELIS/BATAI SKIRTA MASYVINEI MEDIENAI, FANERAI IR TARPINIAM LAKO ŠLIFAVIMUI - Naudojamas DARBO PLOTIS mm 1350 - ŠLIFAVIMO JUOSTOS ILGIS mm 1370 x 2150 - DIDŽIAUSIAS RUOŠINIO STORIS mm 160 - PLIENO KALIBRAVIMO VOLELIS mm 180 - GUMUOTAS ŠLIFAVIMO VOLELIS mm 180 - ŠLIFAVIMO BATO PLOTIS mm 50 - JUOSTOS VARIKLIO GALIA kW 14,7 - JUOSTOS GREITIS m/s 18/16 - PADAVIMO VARIKLIO GALIA AG 0,75 - Reguliuojamas padavimo konvejeris su bepakopiniu greičiu m/min 4/20 - AUKŠČIO REGULIAVIMO VARIKLIS AG 0,33 - Mechaninė JUOSTOS OSCLILIACIJA „ECO GEAR PATENTO SISTEMA“ - 1 vnt. BŪGNO STABDYS juostos stabdymui - Pasukama VOLELĖ juostos įtempimui - 3 vnt. PRISPAUDIMO VOLELIAI su gumine danga - Avarinio stabdymo juosta prie įėjimo Prieinamumas: iš karto Iedpfx Aaezh Rufjteaw Sandėlio vieta: Flörsheim

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 350 mm, SCM Wide Belt Calibrating and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (hp) Feed gearbox motor: 0.45/0.8 (0.6/1.1) kW (hp) Feed speed: 4.5 / 9 m/min Standard equipment: - R140/85 rubber-coated calibrating roller, 140 mm diameter, 85 Shore – 1st position - R160/45 rubber-coated sanding roller, 160 mm diameter, 45 Shore – 2nd position - Hard sanding pad with manual working height adjustment - Motor power for 1st unit: 11 kW (15 hp) - Electronic ammeter for main motor current display - Electronic display of working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers Isdpfetwqn Sex Aatsaw - Anti-kickback device at infeed before first unit - Rubber feed belt, 60 Shore - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds (4.5 / 9 m/min) with gearbox motor - Automatic belt tracking Including the following special accessories: 1 pc. Version “B” for RCS, including: pneumatic on/off switching of roller on 1st unit “R”, pneumatic on/off switching of roller on 2nd unit “CS”, “MESAR” elastic segmented sanding pad, pneumatic on/off switching of sanding pad unit, electronic programming unit “LOGIC 50”, electronic adjustment of working height 1 pc. CE safety compliance 1 pc. roller table at infeed and outfeed for long workpieces, fitted with 5 non-driven rollers 1 pc. “RA” skewed-ribbed steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. sanding belt wear optimizer 1 pc. LED internal lighting 1 pc. rear door with inspection window 1 pc. Logic SC control system

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9673240, šlifavimo plotis: 1 100 mm, galia: 15 kW (20,39 AG), aukščio reguliavimo tipas: elektrinis, šlifavimo juostos ilgis: 1 900 mm, suslėgto oro jungtis: 6 juosta, šlifavimo juostos plotis: 1 120 mm, Combination sanding unit with contact roller and air sanding pad Brush roller Sanding belt tension pneumatic, motorized thickness adjustment Technical specifications: Max. working width: 1100 mm Max. workpiece thickness: 150 mm Min. workpiece thickness: 3 mm Sanding belt size: 1900 x 1120 mm Feed speed: 5/10 m/min Sanding unit motor power: 15 kW Height adjustment motor power: 0.50 kW Feed conveyor motor power: 0.5/1.0 kW Iajdpfx Aaetppzvotsw Operating pressure: 6 bar Air consumption: approx. 20 l/min Extraction port: 2 x 200 mm Weight: approx. 2100 kg Machine width: approx. 1750 mm Machine depth: approx. 1700 mm Machine height: approx. 1900 mm

Būklė: labai geros būklės (naudotas), Wide Belt Sander for Calibration and Fine Finishing Manufacturer: SCM Model: RCS 1st Unit: Calibrating Roller, Steel 2nd Unit: Combination Unit (Roller 60 Sh, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 emergency stops Table extension with 2 rollers, front and rear Sanding pad inserts covered with new graphite cloth Including nearly new sanding belts All documentation included Note – Used Machines: Iajdpfx Aasxqggcstow • Technical data and prior sale subject to change. • Prices quoted are ex location – loaded free on truck! • The machine has been cleaned and tested for functionality. • All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Būklė: labai geros būklės (naudotas), Calibrating and fine sanding machine with 1 sanding unit and 1 motor, top processing Working width: 1000 mm Sanding belt dimensions: 2200 x 1030 mm Workpiece dimensions: 3 - 170 mm Table height adjustment motor: 0.18 kW, 400 V, 50 Hz Main motor: 7.5 kW, 400 V, 50 Hz 2 feed speeds: 5.5 & 11 m/min 1st Unit: Combination unit, rubberized sanding roller, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd Unit: Cleaning brush Compressed air requirement approx. 6 bar Extraction port diameter: 200 mm Dimensions (approx.) L x W x H = 1385 x 1980 x 1900 mm Weight: approx. 1800 kg Automatic workpiece thickness adjustment with digital display Sanding belt oscillation Sanding belt emergency stop with disc brakes Table extension with 3 rollers on outfeed Emergency stop button Main switch CONVEYOR BELT LIKE NEW - replaced by us approx. 3 years ago MORE THAN 30 WIDE-BELT SANDING BELTS INCLUDED Notes on used machinery: • Subject to error in technical specifications and prior sale. • Prices quoted are ex-works and for self-collection – loading free of charge! • The machine has been cleaned and function-tested. • All machines are sold as viewed, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at our premises. • Special arrangements are only valid in written form. Iajdpfx Ajudxchoatsw (We will only respond to inquiries with your address and telephone number!)

Būklė: labai geros būklės (naudotas), Wide Belt Sander for Calibration and Fine Sanding Working width: 1100 mm Min./max. workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt dimensions: 1115 x 2620 mm Feed speed: 4.5 / 9 m/min Extraction connection: 3 x 160 mm Compressed air connection: 6 bar 1st Unit: Sanding roller rubber-coated, 90 Shore Ijdstwzyfopfx Aatsaw Motor power: 11 kW 2nd Unit: Combination unit Sanding roller, rubber-coated, 60 Shore Sanding pad, fixed Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Outfeed table extension Dimensions (approx.) L x W x H = 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: • Technical data subject to error and prior sale. • Listed prices are ex-works, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries including your address and telephone number!)

Būklė: naujas, Wide belt sanding machine for calibration and fine sanding Working width mm: 1,100 Min./Max. working height mm: 4 / 170 Abrasive belt width mm: 1,115 Abrasive belt length mm: 2,150 Geared motor kW: 2.2 Feed speed m/min: variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower, unit 1 Oscillating belt cleaning blower, unit 2 Oscillating belt cleaning blower, unit 3 10” touch screen control panel "eye-S" 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatically segmented sanding pad / rubber-coated sanding roller 35SH Motor power 1st unit kW: 18.5 Motor power 2nd & 3rd unit kW: 18.5 Version "B" for RRCS with: Ijdpfxjitvkue Aatsaw Pneumatic activation and deactivation, 1st unit Pneumatic activation and deactivation, 2nd unit Pneumatic activation and deactivation, 3rd unit “MESAR” elastic segmented sanding pad Pneumatic activation and deactivation of sanding pad unit Electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY!

Būklė: naujas, Technical Data: Working width mm: 1,350 Isdpshtuvrofx Aatjaw Min./max. working height mm: 4 - 170 Abrasive belt width/length mm: 1,370/2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working Units: 1st Unit: "RA" angled-ribbed contact roller, Sh 86, diameter 160 mm 2nd Unit: Combo: Rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding shoe “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding shoe “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller/sanding shoe unit - Sector activation via electronic control, synchronizing engagement with the feed speed and adjusting the number of active segments depending on the workpiece geometry, enabling selection of more or fewer sectors to the left and right of the workpiece. - Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar at infeed Additional Equipment: Roller table infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW electric fan (5.5 HP) integrated into the machine frame Oscillating blow-off device 2nd unit Touch screen 10.4” display with ‘eye S’ software integration ATTENTION: IMAGES ARE SAMPLE PICTURES OF A SIMILAR SD70!

Būklė: naujas, DMC SD 90 RCS 135 C-Plus version Technical Specifications Useful working width: 1350 mm Min./max. working height (with fixed table): 4 – 200 mm Abrasive belt dimensions: 1,370 x 2,620 mm Feed speed: 3.5–18 m/min Working Units: - “MESAR 46” elastic electronic segmented sanding pad with 46 sectors (30 mm), complete with B/46 workpiece sensing bar at infeed • 1st position: “RA” diagonally ribbed steel contact roller D=250 mm • 2nd position: COMBI unit with rubber-coated sanding roller D=175 mm, 65 Sh - Floating pressure shoe in 1st position, pneumatically adjustable - Two grooved rubber-coated pressure rollers in 2nd and 3rd positions - Oscillating air jet cleaning device for 1st and 2nd unit - Workpiece cleaning unit with rotating air nozzles Power: • 1st unit motor: 18.5 kW • 2nd motor with inverter: 15 kW Table: - Fixed table, working height 900 mm - Roller table at infeed for long workpieces - Roller table at outfeed for long workpieces - Perforated table and conveyor belt 50 Sh - Vacuum table with 4 kW electric fan integrated in the machine frame - Stepless conveyor belt feed from 3.5–18 m/min (gear motor 0.75 kW) Control: Iasdpfxsd E Ixzs Aatew - Electronic programming unit "Pro-Sand" - Touch-screen with 10.4" display - Door with inspection window on setup side for machines with two working units - LED interior lighting Note for used machines: - Technical data subject to errors and prior sale. - Prices quoted are ex-works, loaded free on truck. - The machines have been cleaned and function tested. - All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at our site. - Special agreements are valid only if made in writing. (We will respond to inquiries only if you provide your address and telephone number!)

Būklė: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Platusis juostinis šlifuoklis SCM Sandya 10 SCM 1100 R+R+RT Specifikacija: • Būklė – naudotas, po kompleksinės apžiūros • Gamintojas – SCM • Modelis – Sandya 10 • Darbinis plotis – 1100 mm • Maksimalus darbinis aukštis – 160 mm • 4 šlifavimo agregatai iš eilės: - kalibruojantis plieninis velenas – 160 mm skersmens - kietos gumos velenas – 160 mm skersmens - kombinuotas agregatas (guminis velenas + sekcijinė batelio tipo šlifavimo galvutė su papildomos prispaudimo funkcija) - dulkių nuėmimo šepetys • Pagrindiniai varikliai – 18,5 ir 12/15 kW galingumo • 2 darbiniai greičiai (antrajame variklyje) • Transporterio greitis reguliuojamas tolygiai • Elektroninis šlifuojamo elemento storio indikatorius • Optinis svyravimas • 2-ojo ir 3-iojo agregatų nupūtimo funkcija • Galimybė kiekvieną agregatą nuleisti/pakelti atskirai • Šlifuojamo elemento storio matuoklis • Stalas paruoštas vakuumo siurbliui (siurblys į komplektą neįeina) • Šlifavimo juostos matmenys – 2150 x 1115 mm • Dulkių ištraukimo jungtys: 4 x 155 mm ir 4 x 120 mm • Svoris apie 1800 kg • Gamybos metai – 1995 • Bendrieji matmenys 215 x 170 x 210 cm (ilgis x plotis x aukštis) Papildoma informacija: • Mašina yra geros techninės būklės, paruošta tiesioginiam naudojimui • Nuotraukose pavaizduota faktinė parduodamo daikto būklė • Galima įjungti ir patikrinti įrenginį vietoje • Nemokamas mokymas dirbti su mašina (įmonės būstinėje) Ijdpfx Aaezcy I Eetoaw • Aukcione nurodyta kaina nurodyta be PVM ir transporto išlaidų Finansavimas ir transportas: • Organizuojame transportavimą su MDD autoparku, kurjerių įmonėmis ar išoriniais vežėjais • Teikiame finansavimo galimybes – lizingas arba lizingo paskola

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, veikimo valandos: 1 395 h, Kalibravimo ir apdailos automatas, plačia juosta šlifuojanti staklė „Kundig Brilliant“ su elektroniniu segmentiniu šlifavimo padu, reguliuojamu šlifavimo agregatu ir dažų paviršiaus apdailos funkcija. Iodpfoyxg N Njx Aatoaw Vaizdo įrašas, kuriame rodomas veikiantis įrenginys, gali būti atsiųstas pagal užklausą. Ideali šlifavimo staklė interjerų apdailos įmonėms, taip pat tinka dažų paviršiaus tarpiniam šlifavimui. Įrišimo staklė su kombinuotu agregatu ir elektroniniu segmentiniu spaudimo bėgeliu. Galimybė įjungti ir išjungti kraštinius segmentus. Spaudimo bėgelio segmento plotis – 22 mm (idealus dažų paviršiaus tarpiniam šlifavimui). Pneumatiškai valdomas kalibravimo volas su grioveliais ir gumuota danga, užtikrinantis atitinkamą abrazyvo dydį. Variklio galia – 11 kW. Be pakopų reguliuojamas šlifavimo greitis nuo 3 iki 15 m/s, valdomas dažnio keitikliu. Juostos tiekimo greitis be pakopų reguliuojamas nuo maždaug 3 iki 15 m/min. Juostos pūtimo įtaisas valdomas pagal apdirbamo gaminio dydį. Pastovus stalo aukštis – maždaug 950 mm, reguliuojant staklių viršutinę dalį, todėl galima integruoti į šlifavimo liniją. Tiekimo juosta vis dar turi gerą sukibimą ir yra labai geros būklės. Kilimas su reguliuojamu vakuuminiu pūtikliu, todėl galima saugiai laikyti net ir mažas detales. Maksimalus šlifavimo plotis – maždaug 1100 mm. Gaminio aukštis – maždaug 3,5–200 mm. Šlifavimo juostos matmenys – 1120 x 2000 mm. Įvadinio ir išvestinio ritininio stalo komplektas. Gaubto užraktas. Dulkių nusiurbimo jungtis – 1 x 180 mm, 1 x 125 mm. Terminalinis valdymas su 45 programuojamomis šlifavimo programomis, skirtomis automatiniam staklių valdymui. Parametrai: juostos greitis, tiekimo greitis, gaminio aukštis, juostos pūtimo antgalis, vakuumas, kalibravimo volo padavimas ir segmentinio šlifavimo pado parametrai. Storio matavimo sistema su reguliuojama drožlių nuėmimu ir „Enormatic“ sistema, užtikrinanti automatinį storio nustatymą su tiekimo paleidimu, todėl nereikia nuolat matuoti su šuorimu. Programas, skirtas skirtingoms šlifavimo užduotims, galima išsaugoti ir pasirinkti naudojant „smartselect“. CE ženklas. Eksploatavimo instrukcija. Yra 2 šlifavimo įdėklai. Keturios gofruotos apsauginės jungtys buvo atnaujintos. Be paveikslėlyje pavaizduoto jungiamojo laido. Originali spalva, tik nedaug vietų buvo atnaujintos. Labai gera būklė, staklės iš mažos įmonės. Staklės dirbo maždaug 1395 valandas, t. y. maždaug 2 valandas per savaitę. Matmenys: maždaug 1900 x 1650 x 2150 mm (ilgis x plotis x aukštis). Svoris: maždaug 2300 kg. Su dideliu mobiliojo stalo komplektu, esančiu juostos tiekimo aukštyje, skirtu šlifavimo juostoms laikyti. Stalo matmenys: maždaug 1520 x 1360 x 950 mm. Įskaičiuota įvairių šlifavimo juostų, nuo K80 iki K400. Norėdami apžiūrėti stakles, galime susitarti dėl parodymo mūsų patalpose. Mes siūlome tik stakles, kurias galima apžiūrėti mūsų sandėlyje. Žr. „kiti šio tiekėjo pasiūlymai“.

Būklė: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 22.787, obliavimo plotis: 860 mm, obliavimo aukštis: 300 mm, obliaus veleno skersmuo: 220 mm, sukimosi greitis (maks.): 6 000 aps./min, sukimosi greitis (min.): 3 000 aps./min, Įranga: sūkių greitis be galo kintamas, REX SUPERMASTER 10/86-WW Obliavimo staklės, skirtos apdirbti konstrukcinę medieną (KVH) ir medienos plokštes (BSH) tvirta segmentinė konstrukcija su keičiamų velenų sistema apdorojamieji velenai – viršutinis/apatinis, Z=4, peilių ilgis 880 mm, osciliuojantys apdorojamieji velenai – dešinysis/kairysis, Z=4, peilių ilgis 320 mm, osciliuojantys 4 atskiri frezavimo įtaisai Iasdpfxszl Rqnj Aatsw 2 papildomi vertikalūs darbo velenai, iki 340 mm įrankio ilgis frezavimo įtaisus galima visiškai išimti iš staklės, keičiant įrankius 4 tvirti padavimo įrenginiai, kiekvienas su 4 padavimo velenais, valdomais per kardano velenus

Būklė: naudotas, Gamybos metai: 2005, mašinos/transporto priemonės numeris: A41213AC1, Techniniai duomenys: - Gamintojas: Costa - Tipas: SA TS 1350 - Pagaminimo metai: 2005 - Darbinis plotis: 1.350 mm - Šlifavimo juostos matmenys: 2.620 x 1.380 mm - Šlifavimo aukščiai: 3–160 mm - Pado greitis: 5–25 m/min - 1-asis agregatas: - Išilginio šlifavimo agregatas - Juostos matmenys: 2620 x 1380 mm - Elektroninis šlifavimo batas, Costa sistema - Jutiklio volelio atstumas: 32 mm - Segmento plotis: 32 mm - Pagrindinio variklio galia: 11 kW - Dulkių šepetėlio skersmuo: 180 mm - Valdymo pusė: kairė - Aukščio reguliavimas: varikliu valdoma - Vakuuminis transporterio konvejeris - Bendra jungiamoji galia: 20 kW / 43 A - Plotis: 1.924 mm - Ilgis: 2.059 mm - Aukštis: 2.185–2.375 mm - Ištraukimo jungtys: D 2x100 mm + 2x160 mm Iodpox Ex Tmsfx Aateaw - Oro srautas: 4.830 m³/h prie 24 m/s - Suspaustas oras: 6 bar, 880 NL/min - Įtampa, Hz: 400 / 50 - Įtampos svyravimai maks. +/- 5 % - Svoris: 3.100 kg - Vieta: sandėlyje Blomberg mieste

Būklė: naudotas, Gamybos metai: 1997, naudota gera būklė mažai naudota pašalinta patikrinta, ar veikia dalinai atnaujinta visiškai sureguliuota Su 1 vnt. šlifavimo agregatu Kombinuotas agregatas su elektroniniu įdėklu Šepetys nuo dulkių Gamintojas: Bütfering Iaedpfxezkvy Eo Aatsw Tipas: ECO e1100 Pagaminimo metai: 1997 Mašinos Nr.: 34546 Darbinis plotis, apytiksliai, mm: 1100 Pravažiavimo aukštis, apytiksliai, mm: 150 Atitinka CE tipo patvirtinimo reikalavimus Agregatų skaičius, vnt.: 1 Juostos matmenys, ilgis x plotis, mm: 1120 x 1900 Padavimo greitis, m/min: 4 + 8 Kalibravimo volelis Su grioveliais Padengtas guma Kombinuoto agregato galia, kW: 11 Elektroninis įdėklas Dulkių nusiurbimo jungtis, mm: 180 + 140 Reikalingas plotas, apytiksliai, ilgis x plotis x aukštis, mm: 1700 x 1700 x 2000 Svoris, apytiksliai, kg: 1500 Sandėlio vieta: 97447 Gerolzhofen, nemokamai pakraunama, be pakuotės Perduodama tokios būklės, kokia yra apžiūrėta, be garantijos ir atsakomybės

Būklė: geras (naudotas), Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: C03/136, Mašina yra prieinama nuo šiol. Iaodpfxozi Avwo Aatow

Būklė: naudotas, Gamybos metai: 1986, Maks. darbinis plotis: 1300 mm Juostų skaičius: 3 juostos 1 agregatas: batelis 1 velno skersmuo: 100 mm 1 agregato tipas: plieninis velenas/batelis 2 agregatas: velenas/batelis 2 velno skersmuo: 100 mm 2 agregato tipas: plieninis velenas 3 agregatas: velenas/batelis Ijdovvki Nopfx Aatsaw 3 velno skersmuo: 100 mm 3 velno tipas: griovelinis plieninis velenas 3 agregato šlifavimo batelis: elektroniniai atskiri segmentai Valymo šepečiai: Taip Galima lakuoti: Taip Juostos nupūtimas: Taip Vakuuminis kilimėlis: Taip Sandėlio vieta: Nattheim

Būklė: naudotas, Gamybos metai: 1997, Juostų skaičius: 1 juosta Didžiausias praleidimo aukštis: 150 mm Iajdpjvvkkasfx Aatow Didžiausias darbinis plotis: 1100 mm 1-as agregatas: kombinuotas agregatas 1-osios veleno skersmuo: plieninis velenas 1-ojo agregato tipas: veleno/bato agregatas 1-ojo agregato šlifavimo batas: elektroniniai atskiri segmentai, segmento plotis 50 mm 1-ojo agregato šlifavimo juostos ilgis: 1900 mm 1-ojo agregato šlifavimo juostos plotis: 1120 mm Variklio galia, padavimo greitis: 4 ir 8 m/min 2-as agregatas: dulkių šepetys Svoris apie: 2000 kg Matmenys: 1800 x 1450 x 2120 mm Sandėliavimo vieta: Nattheim

Būklė: paruoštas naudoti (naudotas), Įrenginys, naudojamas medienai obliauti, 420 x 250 mm Padavimo greitis, reguliuojamas be pakopų, 15–90 m/min. Iedpfx Aaezmmrdotsaw

Būklė: labai geros būklės (naudotas), Juostinis šlifuoklis VG M-300 Šlifavimo plotis 300 mm, 1 agregatas (guminis velenas) padukas Variklis 5,5 kW. du padavimo greičiai, Rankinis stalo reguliavimas, oscilacija, Iedpfezc Iidjx Aateaw šlifuoklis visiškai paruoštas darbui.

Būklė: labai geros būklės (naudotas), Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Iajdpoduw Ekofx Aatsw Weight: approx. 1100 kg

Būklė: naudotas, Gamybos metai: 1991, Naudota mašina Pagaminimo metai: 1991 Mašina pilnai aptarnauta ir patikrinta Darbinis plotis: 1100 mm Iodpfjw I U N Ijx Aatsaw Darbinis aukštis: 140 mm Aukščio reguliavimas: elektrinis Ruoinio storio rodmuo: skaitmeninis Agregatų skaičius: 2 1-asis agregatas: Kombinuotas agregatas (volelis - batelis) su elektroniniu segmentiniu šlifavimo bateliu 2-asis agregatas: Batelių agregatas, elektroninis segmentinis batelis Su vakuuminiu transporto kilimu Dulkių nuvalymo šepetys: taip Variklio galia: 2 x 15kW Srovės suvartojimas: 65A Ištraukimo jungtis: 4 x 200 mm Šlifavimo juostos: 1120 x 1900 Svoris: 3500 kg Prieinamumas: iš karto Sandėliavimo vieta: Hochheim

Būklė: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main region and North Rhine-Westphalia). These enquiries will not be answered. Equipment and Technical Data: The Master delivers precision sanding, embodying the essence of our 75 years’ experience in sanding technology. This means it comes equipped—out of the box—with all the features essential for fast and reliable production of perfect surfaces. Nothing more, nothing less. The core Kündig Master model is fitted with a calibration roller and a sanding pad unit. Its proven construction guarantees decades of high-precision sanding, even across the generous working width of 1350 mm. Additionally, there is an integrated control unit for rapid and intuitive operation. Sanding Units – Proven Combination The sanding section uses the tried-and-tested combination of calibration roller and sanding pad. For safe workpiece feed, a parallel-sprung steel pressure roller is located at the machine infeed, while rubber pressure rollers are positioned between the sanding units. Calibration Unit (R): The calibration unit features a grooved rubber contact roller with proven hardness, ideal for calibration tasks and capable of handling high removal rates if required. The contact roller height is continuously adjustable to compensate for the thickness of the applied abrasive. Iedsw Naanspfx Aatjaw Segmented Sanding Pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad (instead of a pneumatic system), with a sensor width of 35 mm. This allows for even greater precision when fine sanding workpiece edges. The edge pressure of the sanding segments is automatically regulated, but can also be finely adjusted using the touchscreen, allowing targeted sanding of workpiece edges. The graphite glide covering is also quick and easy to change. Summary of Features Construction: In terms of robustness and durability, the Master stands equal to our other model ranges. It features the same heavy-duty build quality that makes all our machines long-term investments, ensuring precise sanding results for many years to come. Upper Section Adjustment: For over 30 years, we have equipped our machines exclusively with upper section adjustment. Why? It is more complex to engineer than table adjustment, but it offers clear advantages: greater weight capacity for workpieces, consistent precision over time, and the benefit of a fixed working height. Workpiece Dimensions: The opening (clearance) adjustment of the upper section is motorized and finely controlled via touchscreen. Maximum workpiece height is 160 mm. With a 1350 mm working width, the Kündig Master provides the generous and proven industry-standard dimension.