Kornit Breeze 70-Mach-9210 pirkti naudotą (33 413)

Būklė: naudotas, Gamybos metai: 2022, keliamoji galia: 5 000 kg, kėlimo aukštis: 6 050 mm, bendras ilgis: 6 450 mm, - Load capacity: 4,999 kg - Load center: 500 mm - Load distance: 540 mm - Axle load with load, front: 10,468 kg - Axle load without load, front/rear: 2,956/3,635 kg - Front tire size: 355/45-15 - Rear tire size: 250-15 - Number of wheels front/rear: 2x/2 - Track width: front, single tires: 1,210 mm Nodpsy E Uf Eofx Acpjla - Track width: front, dual tires: 1,364 mm - Rear track width: 1,120 mm - Mast/carriage tilt, forward/backward: 3/7 degrees - Seat height: 1,298 mm - Coupling height: 496 mm - Fork carriage: Category 3 / Form A - Aisle width with pallet 1000 x 1200 crosswise: 4,470 mm - Aisle width with pallet 800 x 1200 lengthwise: 4,670 mm - Turning radius: 2,730 mm - Smallest turning point distance: 746 mm - Travel speed with/without load: 20/20 km/h - Lifting speed with/without load at minimum fan speed: 0.50/0.53 m/s - Lowering speed with/without load: 0.50/0.50 m/s - Gradeability with/without load: />30% - Service brake: mechanical - Engine manufacturer/type: Deutz/TCD 2.9 L4 - Rated speed: 2,200 rpm - Max. torque: 260 Nm - Number of cylinders/displacement: 4/2,900 cm³ - Working pressure for attachments: 250 bar - Oil flow for attachments: 30 l/min - Towing coupling: pin

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 203129, spaudimo jėga: 400 kN, varžto skersmuo: 18 mm, darbinio tūrio: 23 cm³, Here we are offering the following well-maintained, pre-owned injection moulding machine as part of our business specialised in used injection moulding machinery. Of course, we also purchase well-maintained injection moulding machines with a year of manufacture from 2010 onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h, screw and barrel replaced Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter valve This machine is equipped with retrofitted interfaces for: Nedpfx Acex Rvcispela - Mould temperature control - Heating channel - Colour dosing/colouring (Siemens Logo PLC control) German language - From first ownership – origin Germany Regular maintenance by the manufacturer and previous owner. Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Minimum mould height: 200 mm Max. daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 cm³ Shot weight: 21 g Injection pressure: 2,500 bar Electrical: Pump: 11 kW Heating: 4 zones, 4 kW Installed load: 15 kW Pre-fuse: 50A Weight: 2,150 kg Warranty: Warranty up to initial commissioning Loading / Shipping: Loaded free on truck provided by buyer, or free delivery within Germany (freight at cost), ex-stock Hannover, Germany. Please note in regard to our offered machines and company: - We only sell machines purchased directly from ongoing production, ex our warehouse in Hannover - All offered machines are inspected and tested prior to dismantling - We do NOT deal in insolvency assets and are NOT brokers trading in third-party property - All machines come from successful businesses where regular maintenance is a given - All machines offered are available for inspection at our warehouse

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, įpurškimų skaičius: 2, Here we offer the following well-maintained used injection moulding machine as a specialized trader in injection moulding machines. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 - 2-Component Machine Year of manufacture: 2009, first owner in Germany • Total cycles: 12.3 million • Manual operation: 86,565 hours • Automatic operation: 78,099 hours Injection Units (2K) Nlodpfx Aeyzumzecpja Injection Unit 1 – horizontal – 290 • Screw diameter: 25 mm • Shot volume: 71 cm³ Injection Unit 2 – vertical – 70 • Screw diameter: 18 mm • Shot volume: 21 cm³ Clamping Unit Mounting plates: 695 x 695 mm • Max. platen distance: 925 mm Opening stroke: 675 mm Mould installation height: 250 mm • Electric rotary indexing: present Extras Hot runner / additional axes • 12-zone integrated hot runner system • 3x core pulls • 2x air blast functions  → incl. control for needle shut-off • Various customer-specific inputs and outputs Interfaces / Communication • ALS • Connection for temperature control units • Connection for dryers Handling / Multilift H (6 kg) • 2x vacuum circuits • 5x double-acting gripping functions • Z-axis servo-driven, 800 mm stroke • C, G, X, and B axes pneumatic • Various customer-specific inputs and outputs  → incl. gripper monitoring Maintenance logs fully available for the past 3 years - Both injection units completely resealed by Arburg - Clamping unit completely resealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/Shipping Free loaded onto buyer’s truck or delivered free to location against freight charge reimbursement Worldwide shipping available From our warehouse in Hannover, Germany Additional information about the machines we offer and our company: - We only sell our own machines, purchased from running production, directly from our warehouse in Hannover - All machines are checked and tested before dismantling - We do NOT sell insolvency goods – we are NOT brokers dealing with third-party property - All machines come from successful businesses for whom maintenance and care are a matter of course - All machines offered can be inspected at our warehouse

Gamybos metai: 2025, būklė: naujas, New Machine Year of manufacture: 2025 Features and technical data: Complete in standard configuration with: - Robust, torsion-resistant steel frame, manufactured as a welded and bolted structure - Top lamellar pressure beam with 6 elements, side lamellar pressure beam with 5 elements - Lamellar pressure beams with field-proven tolerance compensation (Ganner system) for tightly clamped carcass joints - Counterpressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels - Continuous pressing area with a height of 95 mm at the lower vertical pressure beam - Electromotive adjustment of the two pressure beams via precision trapezoidal threaded spindles (with enhanced lead and runout accuracy) and high-performance slide nuts with grease reservoir - Pressing is performed electromotively, using 2 separate worm gear motors (2 x 0.75 kW each) - The pressure force of the beams can be steplessly adjusted electronically with 2 potentiometers and is regulated via frequency converters, ensuring completely wear-free pressure control - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressure beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/sec - Jog function for precise positioning of both pressure beams, e.g., for low pressing forces, drawers, and carcasses at 45° - Simple operation via 6 separate push buttons; 8 movement cycles can be selected via control panel - Freely adjustable press time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of the two pressure beams - Re-press function to increase or decrease pressing force during the pressing process Nodpfxsw Nafks Acpsla - Working height/loading height: 300 mm - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams. Press speed: 5 / 10 / 25 mm/sec and rapid traverse speed: 50 mm/sec. Sensors can be disabled for pressing special components. Including set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Būklė: naudotas, rida: 352 753 km, galia: 240 kW (326,31 AG), pirmoji registracija: 05/2007, bendras svoris: 18 000 kg, kuro tipas: dyzelinas, spalva: oranžinė, ašių konfigūracija: 4x2, didžiausias leistinas svoris: 7 150 kg, tuščias svoris: 10 850 kg, kita apžiūra (TÜV): 06/2025, ratų bazė: 3 200 mm, stabdžiai: variklio stabdymas, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 4, pakaba: plienas-oras, sėdimų vietų skaičius: 2, Įranga: ABS, borto kompiuteris, diferencialo užraktas, kabina, oro kondicionavimas, priešrūkiniai žibintai, statymo jutikliai, suodžių filtras, sėdynės šildytuvas, trauki kontrolė, vairo stiprintuvas,

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Automatinis tekinimo staklės Genini TBK 70 Išeinantis kvadratas: 45×140 mm (apie 10 vnt./min – 600 vnt./val., su 2 šiurkščiais apdirbimo įrankiais – 1 apdailos įrankis) Didžiausias apdirbamas ruošinys: 70×70 mm Mažiausias apdirbamas ruošinys: 20×20 mm Didžiausias apdirbimo ilgis: 300 mm Mažiausias darbinis ilgis: 25 mm Nlsdpfjyxqc Hox Acpja CE ženklinimas

Gamybos metai: 2021, veikimo valandos: 4 748 h, būklė: labai geros būklės (naudotas), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 4979.69 h For sale is a pre-owned temperature test chamber from Weiss Technik. This test chamber is used for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Explanation of the designation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70°C) e = energy-optimized version 5 = temperature change rate (series) Equipment: Nledpey El Ttefx Acpea Stainless steel interior Recirculation fans Touch control (WEBSeason) Viewing window Automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70°C to +180°C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Nominal current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A / R23 Weight: approx. 1200 kg Important safety information for you as the buyer: The following procedures are carried out in advance on our offered chambers: 1. Functional inspection and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (Technical data subject to changes and errors!) We are happy to answer any further questions by phone.

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, garantijos trukmė: 6 mėnesiai, įėjimo įtampa: 400 V, paskutinio kapitalinio remonto metai: 2026, Sertifikuota DGUV iki: 05/2027, darbinis plotis: 700 mm, konvejerio juostos plotis: 700 mm, įvesties srovės tipas: trifazis, Universum HWM 50/70 EZ ragelių sukimo mašina Nlodpfxey Ebiws Acpja visiems lazdelės tipo gaminiams, kaip Kornspitz, precliai ir sūrios lazdelės ir kt. Universalus – kombinuotas – sukimo aparatas visiems tešlos tipams vynioti ir formuoti ilgas lazdeles patikima technologija Ragelių sukimo mašina pastoviai aukštai kokybei! tik pas mus DGUV V3 patikrinta jungtis 400V, 16A-CEE kištukas naudota, atnaujinta ir SAB patikrinta mašina su garantija ir atsarginių dalių tiekimu Apsilankykite mūsų didelėje parodoje!

Būklė: geras (naudotas), Ištekiniai grąžtai, spiraliniai grąžtai, grąžtai - Gamintojas: Maysso / Unisto / Hartner / Stock, 6 vnt. spiraliniai grąžtai Ø 51 - 70 mm - Tipas: dviejų briaunų, MK5 kotas su plokščiu grąžto galu Nljdoy A Inuopfx Acpja - Dydis/vnt.: žr. nuotrauką ir sąrašą - Kaina/pardavimas: tik pilnas komplektas - Pagal užklausą: iš papildomų sandėlio likučių galima pasirinkti įvairių dydžių/ kiekių - Transportavimo matmenys: 345/270/H100 mm - Svoris: 23,7 kg

Būklė: labai geros būklės (naudotas), Weiss WT-1000/70/5 Temperature Test Chamber For sale is a used temperature test chamber manufactured by Weiss, model WT-1000/70/5. This unit is designed for precise temperature testing in industrial and laboratory environments and is suitable for research, development, and quality assurance applications. The chamber allows reproducible temperature cycles across an extended range and is particularly suited for material testing, aging tests, and stress testing under defined temperature conditions. Technical Data Manufacturer: Weiss Model: WT-1000/70/5 Device type: Temperature test chamber Temperature range: -70 °C to +180 °C Temperature deviation (temporal, center of usable space): ± 0.1 to ± 0.5 K Temperature uniformity (spatial): ± 0.5 to ± 2 K Heating rate: 6.1 K/min Cooling rate: 6 K/min Test chamber volume: approx. 1000 liters Test chamber dimensions (approx.): 950 x 1100 x 950 mm (H x W x D) External dimensions (approx.): 2000 x 1415 x 2105 mm (H x W x D) Permissible total load on chamber floor: 150 kg Permissible load per shelf: 50 kg Rated voltage: 3/N/PE AC 400 V ± 10 % / 50 Hz Rated current: 38 A Rated power: 26 kW Refrigerants: R404 / R23 Weight: approx. 955 kg Features - Water-cooled system - Spacious test chamber - High temperature cycling speed Nedpfx Acey D Nyuopsla - Industrial-grade construction Condition Used, with age- and use-related wear marks. Service / Inspection The following work is performed on the offered equipment for quality assurance: - Functional check as well as replacement of necessary components - Refill with legally compliant refrigerant if required - Leak test with certificate - Documented test run after successful inspection Scope of Delivery - Weiss WT-1000/70/5 temperature test chamber - Accessories as shown in the pictures Notes - 400 V three-phase power connection required - Shipment via freight forwarder necessary due to size and weight - Sale from commercial inventory - All details without obligation - Subject to prior sale - For further information, please feel free to contact us.

Būklė: geras (naudotas), Gilotininės žirklės pjovimo peilis, atsarginis peilis gilotininėms žirklėms, atsarginiai pjovimo peiliai, pjovimo peiliai, žirklių peiliai -Pjovimo peilis: atsarginis gilotininių žirklių peilis -Pjovimo ilgis: 1290 mm -Skylių atstumas: 240 mm / Ø13 mm, žiūrėkite nuotraukas -Kiekis: yra 8 atsarginiai peiliai -Kaina: už vienetą Nledpfey Akchex Acpea -Matmenys: 1290/15/H70 mm -Svoris: 10,3 kg/vnt.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, TipperTie dvigubas klipavimo įrenginys Modelis: KDMCA 70 Kalibras: 25 - 75 mm, taip pat tinka žiedinei produkcijai (siūlų padavėjas) Njdpfsy Eq Aqsx Acpjla Priedai: 1x antgalis 1x stabdis 1x užpildymo laidas 150.000x spaustukų E 220 T Galimas siuntimas

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1987, mašinos/transporto priemonės numeris: 402, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 70 mm, pjovimo plotis (maks.): 3 200 mm, pjūklo disko skersmuo: 300 mm, pjovimo ilgis (maks.): 3 200 mm, pjovimo aukštis su įrėžėju (maks.): 70 mm, Įranga: dozatorius, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: Saw blade Ø 300 mm, bore Ø 30 mm, Z=60 teeth, kerf SH 70 mm Scoring saw unit: yes - Saw blade Ø 125 mm, bore Ø 20 mm, Z=24 teeth Softforming unit: no Side pressure device: yes - Version: FR 50/100 Offcut cutting device: yes - recess in pressure beam Veneer cutting device: yes Edging cutting device: yes - distance: 145/525/1790 mm Front support table: 400 x 1400 mm - 2 units Rear support table: 240 x 2960 mm - 1 unit Rear support rails: 40 x 2960 mm - 5 units Angle table: 480 x 1400 mm, left Angle stop: with extension Clamping grippers: 4 units - floating - spacing 70/400/1600/2800 mm Stop jaws: 2 units - fixed - spacing 1000/2200 mm Additional rear support foot: no - 3 feet total Protective grid: yes Foot switch: no Nsdpfjvi H Diex Acpela Machine cuts from: left to right Unit can emerge in any position: no Automatic lowering with saw overrun: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: Fine adjustment motor: 0.12 kW, 380 V, 1380 rpm; Main motor: 0.35 kW, 380 V, 1350 rpm.

Būklė: labai geros būklės (naudotas), bendras svoris: 20 000 kg, Tiltinis kranas ABUS - ZLK MACH-ID 9495 Gamintojas: ABUS Tipas: ZLK Pagaminimo metai: 2002 Atkreipkite dėmesį: Šiame puslapyje pateikta informacija surinkta pagal mūsų geriausias žinias ir galimybes bei, kiek įmanoma, iš gamintojo. Informacija pateikiama sąžiningai, tačiau jos tikslumas negarantuojamas. Atitinkamai, ši informacija nėra teisiškai įpareigojanti ar sutartinė. Rekomenduojame patikrinti visus svarbius duomenis. Nljdpjy D Slgefx Acpea

Būklė: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, ORMA NPC-4-70 Shelf Press - fully serviced, ready for operation Specification: • Condition: used, after comprehensive technical inspection • Manufacturer: ORMA • Model: NPC-4-70 • Shelves dimensions: 250 x 130 cm • Max clearance between shelves: 480 mm • Shelves are flat, clean, without dents or damage • 4 cylinders with a diameter of 70 mm • Max pressure: 300 bar • Max pressing force: 70 tons • Automatic pressure compensation in case of pressure drop • Shelves suitable for water/glycol or oil heating • Circulation pump and heating boiler included Njdpjyxdluefx Acpjla • Maximum power consumption: 20 kW • Equipped with safety line (emergency stop) • Original paintwork • Weight: approx. 3000 kg • Year of manufacture: 2004 • Overall dimensions: 310 x 190 x 210 cm (L x W x H) Additional Information: • Good original technical condition, full set of seals replaced • Photos shown reflect the actual condition of the item for sale • Inspection and live demonstration possible on site • The auction price does not include VAT or shipping costs Financing and Transport: • We organize transport with our MDD fleet, courier services or external carriers • Financial support available in the form of leasing or lease loan

Būklė: naudotas, Gamybos metai: 2004, Techniniai duomenys: x eiga: 750 mm y eiga: 600 mm Nedjy D Tvmepfx Acpola z eiga: 520 mm Stalo tvirtinimo paviršius: D 700 x 500 mm Sukimosi greitis: 30 000 1/min Įrankio tvirtintuvas: HSK E50 Valdymas: HEIDENHAIN iTNC 530 Įrankių keitimo įrenginys: 60 pozicijų Greita eiga: 50 m/min Stalo apkrova – centrinė/maksimali: 350 kg Bendras galios poreikis: 50 kVA Staklių svoris apie: 9 t Užimama vieta apie: 3,2 x 2,65 x 2,8 m 5 ašių sinchroninis HSC apdirbimo centras, NC apvalus sukamasis-stalas 700x500 mm, B ašis 180°, C ašis 360°, Drožlių transporteris, Parengta 3D matuokliui HEIDENHAIN TS 641 (be matuoklio) BA 4, Veleno aušintuvas, Be vidinio aušinimo (IKZ), Apie 124 200 įjungimo valandų, apie 60 600 veleno valandų iš viso

Būklė: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 15025702504, X ašies eiga: 2 350 mm, Y ašies eiga: 520 mm, Z ašies eigos atstumas: 520 mm, greitas poslinkis X ašimi: 40 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 30 m/min, X ašies padavimo greitis: 10 m/min, Y ašies padavimo greitis: 10 m/min, padavimo greitis Z ašis: 10 m/min, nominali (akivaizdi) galia: 21 kVA, valdiklių gamintojas: HEIDENHAIN, bendras aukštis: 2 800 mm, bendras ilgis: 9 000 mm, bendras plotis: 3 200 mm, stalo plotis: 500 mm, stalo ilgis: 700 mm, stalo apkrova: 310 kg, bendras svoris: 15 000 kg, veleno greitis (maks.): 12 000 aps./min, tvirtinimo skersmuo: 40 mm, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įėjimo srovė: 80 A, valdymo įtampa: 220 V, Įranga: dokumentacija / vadovas, drožlių transporteris, DECKEL MAHO DMU 70 VL Universal Machining Centre - Tool holder: SK 40 - Input increment X/Y/Z: 0.01 mm - Manual feed X/Y/Z: 20 - 2,000 mm/min - Linear scale resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-axis (without partition): 2,350 mm, with partition: 2 x 710 mm - incl. tool changer 2 x 32 stations - Max. tool length from spindle nose: 315 mm - Max. tool weight for automatic tool change: 6 kg - Max. total tool weight in magazine: 80 kg - Required compressed air: approx. 5.5 - 8 bar Work tables: - NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - Max. table rotation speed: 16.73 rpm - Swivel speed: 14.73 rpm - Swivel range: 0 to 180° - Input/display resolution: 0.001° - Weight: approx. 310 kg - one fixed table - Dimensions: 1,000 x 600 mm Nlodpfjym Smbsx Acpja - T-slot spacing: 63 mm - Number of T-slots: 9/14 H7 - incl. chip conveyor and coolant system Attention: The machine can be transported on a truck up to 2,800 mm width! Attention: The item must be picked up, bindingly, on an agreed date between 21.04. and 30.04.2026. FCA D-96257 Marktgraitz – loaded onto truck

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 15025704014, X ašies eiga: 2 350 mm, Y ašies eiga: 520 mm, Z ašies eigos atstumas: 520 mm, greitas poslinkis X ašimi: 40 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 30 m/min, X ašies padavimo greitis: 10 m/min, Y ašies padavimo greitis: 10 m/min, padavimo greitis Z ašis: 10 m/min, nominali (akivaizdi) galia: 41 kVA, valdiklių gamintojas: HEIDENHAIN, valdiklio modelis: TNC 426, bendras aukštis: 2 800 mm, bendras ilgis: 9 000 mm, bendras plotis: 3 200 mm, veleno greitis (maks.): 18 000 aps./min, įrankio skersmuo: 40 mm, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, DECKEL MAHO DMU 70 VL Universal Machining Centre - Operating voltage: 400 V - Frequency: 50 Hz Njdpfx Aceym Sd Tspsla - Connection rating: 41 kVA - Rated current: 80 A - Tool holder: HSK 63 - Input resolution X/Y/Z: 0.01 mm - Manual traverse X/Y/Z: 20 – 2000 mm/min - Linear scale resolution X/Y/Z: 0.001 mm - Positional tolerance in X/Y/Z: 0.010 mm - Travel range X-axis (without partition wall): 2350 mm, with partition wall: 2 x 710 mm - incl. tool changer 2 x 32 positions - Max. tool length from spindle nose: 150 mm - Required compressed air: approx. 5.5 – 8 bar - Work tables: 2 x NC rotary table, 700 x 500 mm - With swivel axis - T-slot spacing: 63 mm - Swivel range: 0 to 180° - Input/display increment: 0.001° - Weight: approx. 310 kg - Incl. the tool holders visible in the photos in the tool changer, as well as chip conveyor and coolant system— Note: The clamping systems on the fixture tables are not included in the scope of delivery. Note: The machine can be transported on a truck up to 2800 mm wide! Note: The item must be collected, at a binding date to be agreed, between 21.04. and 30.04.2026. FCA D-96257 Marktgraitz – loaded onto truck

Gamybos metai: 2021, veikimo valandos: 4 748 h, būklė: labai geros būklės (naudotas), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 4748.2 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Meaning of the designation: T = Temperature test chamber 1000 = approx. 1000 liter volume 70 = low temperature range (-70 °C) e = energy-optimized version Nlodpsy Dd Nqjfx Acpsa 5 = temperature change rate (series) Equipment features: - Stainless steel interior - Recirculation fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power consumption: approx. 21 kW Refrigerants: R449A / R23 Weight: approx. 1200 kg Important information for your security as a buyer: The following points are carried out on our chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see photo) (Specifications are subject to change and error!) For further questions, please don’t hesitate to contact us by phone.

Gamybos metai: 2021, veikimo valandos: 5 128 h, būklė: labai geros būklės (naudotas), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of construction 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. This test chamber is used for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Nledpfx Acey Dclwspsa Meaning of designation: T = Temperature test chamber 1000 = approx. 1000 liter volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg Important safety information for buyers: The following procedures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data!) If you have any further questions, we are happy to answer them by phone.

Gamybos metai: 2021, veikimo valandos: 5 018 h, būklė: labai geros būklės (naudotas), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used to test components and materials under various temperature conditions (e.g. cold, heat, aging). Details of the model designation: T = Temperature test chamber 1000 = approx. 1000-liter volume 70 = Low-temperature range (-70 °C) e = Energy-optimized design 5 = Temperature change rate (series) Nljdpey Dclqsfx Acpea Equipment: - Stainless steel interior - Recirculation fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Nominal current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A / R23 Weight: approx. 1300 kg Important information for your safety as a buyer: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If needed, new filling with compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical specifications and data subject to change and error!) If you have further questions, we’ll be happy to answer them by phone.

Gamybos metai: 2021, veikimo valandos: 5 128 h, būklė: labai geros būklės (naudotas), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 5128 h For sale is a pre-owned temperature test chamber from Weiss Technik. This test chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Model designation meaning: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculating air fans - Touch operation (WEBSeason) - Viewing window - Automatic/manual temperature control Technical Data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Nlodpsy Dck Tefx Acpoa Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg Important buyer information for your safety! The following services are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Gamybos metai: 2021, veikimo valandos: 4 748 h, būklė: labai geros būklės (naudotas), Weiss Temperaturprüfschrank TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 4748 h For sale is a pre-owned environmental test chamber (temperature test chamber) from Weiss Technik. The chamber is designed for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Designation breakdown: T = Temperature Test Chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculating air fans Nodpfxsy Dciio Acpela - Touch control panel (WEBSeason) - Viewing window - Automatic/manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: - Cooling approx. 6 K/min - Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, please note: The following procedures are carried out on all our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerants 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and details are subject to change and error!) For further questions, we are happy to assist you by phone.

Būklė: naujas, Gamybos metai: 2026, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical data: Lamella case clamp from our showroom; Nljdpey Egz Ssfx Acpja Working range: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed case joints - Counterpressure surfaces are continuous 40 mm thick, coated support plates - The pressing force of the pressure beams is continuously electronically adjustable via 2 potentiometers and set using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams, min. 500 daN (kg) up to max. 2,200 daN (kg), continuously adjustable - Pressing force for vertical pressure beams, min. 300 daN (kg) up to max. 2,200 daN (kg), continuously adjustable - Included option: Rapid traverse travel speed for quick positioning of the pressure beams, controlled by automatic workpiece detection using sensors in the pressure beams; pressing speed 5/10/25 mm/sec and rapid traverse travel speed 50 mm/sec; sensors can be deactivated for clamping special workpieces. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cases. Easy operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm Machine is on display with us and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Būklė: naudotas, Gamybos metai: 2005, veikimo valandos: 40 000 h, spaudimo jėga: 25 kN, darbinio tūrio: 440 cm³, įpurškimo slėgis: 1 550 juosta, bendras svoris: 2 500 kg, sraigtinio konvejerio skersmuo: 25 mm, Pristatymo sąlygos: FCA Pegnitz Pristatymo laikas: pagal susitarimą Njdpfx Acoynbcnepela Apmokėjimo sąlygos: 100 % išankstinis mokėjimas prieš mašinos atsiėmimą, grynasis