Kel-Berg Plokščia Platforma pirkti naudotą (17 178)

Būklė: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 03/2009, spalva: kitas, Gamybos metai: 2009, Leergewicht: 7.300 kg Achse 1: links 8 mm, rechts 8 mm Achse 2: links 7 mm, rechts 7 mm Achse 3: links 8 mm, rechts 8 mm Kedpfxev Tcqte Aaujlr Wir haben die Möglichkeit, Anhänger zu stapeln!

Būklė: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 07/2005, spalva: kitas, Gamybos metai: 2005, Eigengewicht: 5.580 kg Achse 1: links 15 mm, rechts 9 mm Achse 2: links 9 mm, rechts 7 mm Achse 3: links 12 mm, rechts 6 mm Wir haben die Möglichkeit, Anhänger zu stapeln! Kledpju At Ifefx Aaujr

Būklė: naudotas, pirmoji registracija: 07/2005, spalva: kitas, Gamybos metai: 2005, Lengvųjų sunkvežimių padangos su 6 skylių ratlankiais. Kedpfxexvx Shj Aauelr

Būklė: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 06/2002, spalva: kitas, Gamybos metai: 2002, Tara: 7.150 kg Ksdpfxjwz Emxj Aauolr Osia 1: vasen 12 mm, oikea 12 mm Osia 2: vasen 12 mm, oikea 12 mm Osia 3: vasen 8 mm, oikea 8 mm Meillä on mahdollisuus pinota perävaunuja!

Būklė: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 10/2004, spalva: kitas, Gamybos metai: 2004, Tuščias svoris: 4 500 kg Ašis 1: kairėje 7 mm, dešinėje 13 mm Ašis 2: kairėje 5 mm, dešinėje 9 mm Ašis 3: kairėje 8 mm, dešinėje 12 mm Ksdoqx Nzxjpfx Aauelr Turime galimybę krauti priekabas vieną ant kitos!

Būklė: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 07/2006, spalva: kitas, Gamybos metai: 2006, Tara: 5.570 kg Achse 1: links 11 mm, rechts 10 mm Achse 2: links 9 mm, rechts 4 mm Achse 3: links 9 mm, rechts 9 mm Kodpou At N Aofx Aauolr Wir haben die Möglichkeit, Anhänger zu stapeln!

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, rida: 58 000 km, galia: 130 kW (176,75 AG), pirmoji registracija: 07/2017, kuro tipas: dyzelinas, bendras svoris: 7 490 kg, kuras: dyzelinas, spalva: balta, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: oras, krovimo vietos ilgis: 6 070 mm, krovinių skyriaus plotis: 2 485 mm, krovos erdvės aukštis: 2 530 mm, Gamybos metai: 2017, Įranga: galinis keltuvas, kruizo kontrolė, oro kondicionavimas, priekabos jungtis, Tow coupling Tail lift SÖRENSEN 1000 kg Pre-installation for toll collection system ISRI comfort suspension seat with seat heating, armrests on both sides Total of 3 seats Main fuel tank 120 l AdBlue tank 25 l Reversing warning system combined with hazard warning lights Kjdpfx Aewt Ahwsauolr

Būklė: naujas, mašinos/transporto priemonės numeris: 009, tuščias svoris: 6 400 kg, didžiausias leistinas svoris: 29 600 kg, bendras svoris: 36 000 kg, ašių konfigūracija: 3 ašys, krovimo vietos ilgis: 13 620 mm, krovinių skyriaus plotis: 2 480 mm, pakaba: oras, padangos dydis: 445/45r19.5, spalva: sidabras, Gamybos metai: 2026, Įranga: ABS,

Būklė: naujas, bendras svoris: 36 000 kg, ašių konfigūracija: 3 ašys, krovimo vietos ilgis: 13 620 mm, krovinių skyriaus plotis: 2 480 mm, pakaba: oras, padangos dydis: 445/45r19.5, Gamybos metai: 2026, Įranga: ABS,

Būklė: naujas, mašinos/transporto priemonės numeris: 007, bendras svoris: 30 000 kg, ašių konfigūracija: 2 ašys, krovimo vietos ilgis: 13 620 mm, krovinių skyriaus plotis: 2 480 mm, pakaba: oras, padangos dydis: 435/50r19.5, Gamybos metai: 2026, Įranga: ABS,

Būklė: dilaminuotas dirbtuvėje (naudotas), KELLENBERGER KEL-VISTA UR 175X600 yra CNC apvalaus šlifavimo staklės, skirtos dideliam tikslumui, precizikai ir patikimumui. Galimybės: centrų aukštis – 175 mm; centrų atstumas – 800 mm; šlifavimo ilgis – 600 mm; maks. skersmuo – 349 mm; didžiausias ruošinio svoris – 100 kg. Pagrindiniai duomenys: Z – 750 mm; X – 320 mm; diskai: L – Ø400×80×127, R – Ø300×40×127; šlifavimo disko greitis – 875–1900 min⁻¹ (be pakopų); šlifavimo variklis – 5 kW; ruošinio velenas – 8–800 min⁻¹; greitasis eiga – 12 m/min; 3×400 V, 50 Hz; svoris – apie 3000 kg; matmenys – 3200×1700×2000 mm. Priedai: aušinimas, aukšto slėgio aušinimo sistema, popierinis filtras, MARPOSS jutiklis, MOVOMATIC matavimo valdiklis, vidinio šlifavimo įranga, balansavimo įrenginys, RS-232 jungtis. Tinka automobilių, laikrodininkystės, aviacijos, medicinos technologijų sritims, kur reikalingos itin tikslios tolerancijos. Kledpfxjyxn Iye Aauer

Būklė: naudotas, KELLENBERGER KEL-VARIA R175 x 1500 is a CNC cylindrical grinding machine designed for high precision, superior accuracy, and reliable operation. Capacities: center height 175 mm, center width 1500 mm, Z-axis 1650 mm, maximum workpiece weight 150 kg; grinding wheels Ø500×80 mm (bore 203 mm) or Ø400×63 mm (bore 127 mm); maximum grinding spindle travel 320 mm. Technical data: grinding wheel speeds steplessly adjustable from 1000 to 2150 rpm (peripheral speed 45 m/s); feed rate 7500 mm/min; workpiece spindle swivels -10/+100° with 8–800 rpm; permissible torque 160 Nm; grinding spindle motor 7.5 kW, workpiece spindle motor 2 kW; connection 3×400 V 50 Hz; rapid traverse 15 m/min; weight approx. 6000 kg; dimensions 4700×2300×2000 mm; compressed air 6 bar. Equipment: coolant unit, paper filtration system, MARPOSS touch probe, set of grinding wheels, live center, set of centers, set of workpiece drivers, set of gap gauges, lighting, 2 tool cabinets, tailstock with fine adjustment, coolant/mist extraction, collet chuck. Achieves tight tolerances Kjdpjyxn Itofx Aaujlr

Būklė: naudotas, KELLENBERGER KEL‑VARIA R175 x 1500 yra CNC apvalus šlifavimo staklės, skirtos dideliam tikslumui, preciziškumui ir patikimumui užtikrinti. Talpa: centrų aukštis 175 mm, centrų atstumas 1500 mm, Z ašis 1650 mm, iki 150 kg; šlifavimo ratų skersmuo Ø500×80 mm (taip pat Ø400×63 mm). Techniniai duomenys: šlifavimo ratų greitis 1000–2150 min⁻¹, apvyniojimo greitis 45 m/s, šlifavimo eiga 320 mm, padavimas 7500 mm/min, varikliai 7,5/2 kW, greitasis režimas 15 m/min, 3×400 V, svoris ≈6000 kg, matmenys 4700×2300×2000 mm. Priedai: popierinis/aušinimo skysčio filtras, MOVOMATIC, Renishaw LP2H, flanšo nuėmėjas, nuotolinio valdymo pultas, MPM. Skirta siauroms tolerancijoms; pritaikymas: automobilių pramonė, laikrodžių gamyba, įrankių gamyba, aviacijos, medicinos technika. Kledpfx Aaeyxn A Rjujr

Būklė: naudotas, Grinding diameter 350 mm Grinding length 1000 mm Center height 175 mm Space requirement approx. 3.6/3.5 m As the world’s leading company in Kellenberger overhauls/retrofits, we are not only able to deliver machines in as-new quality with warranty, but can also offer ongoing service for your machines: Kellenberger Kel-Varia series with Kelco 90 control system. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New, state-of-the-art CNC cylindrical grinding machine control featuring the BEMA grinding interface Klsdpjuwv H Tofx Aauor - Completely rebuilt control cabinet - New drive technology - Replacement of all electrical cabling, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B axis) Standard Equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper, optionally with fine adjustment - Grinding spindle headstocks T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - B axis high-resolution - Marposs measuring system for grinding wheel measurement - Longitudinal positioning with Marposs - GAP control (sensor on grinding spindle headstock), ELASO integrated into control interface - Semi-automatic balancing by ELASO integrated into control interface - BEMAT grinding wheel measurement Options at Extra Cost: - HF internal grinding spindle - High-precision, maximum rigidity workpiece spindle headstock - Measuring control - Extraction unit - Paper band filter Control Functions: Basic Grinding Cycles - Zeroing the workpiece with Z-pos (longitudinal positioning) - Grinding wheel measurement with BEMAT - Touch sensor GAP - Measuring dressing diamonds - Corrections - External and internal cylindrical grinding (oscillation and plunge grinding) - External and internal taper grinding (B-axis swiveling, dressing with straight wheel) - External and internal radius grinding (radius dressed onto wheel) Optional Grinding Cycles - External and internal profile plunge grinding with profile wheel - External and internal profile grinding with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angle - Trapezoidal thread grinding - Out-of-round grinding external and internal 15,000

Būklė: naudotas, Gamybos metai: 2000, Grinding diameter 450 mm Grinding length 1000 mm Centre height 225 mm Photo of a previously delivered machine with similar configuration: - Major maintenance performed - Table geometry renewed - Partial interior repainting Grinding wheel setup LEFT 400x63x127 mm (standard) Grinding wheel setup RIGHT 300x40x127 mm Internal grinding device Ø120 mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding, Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35 m/s or 45 m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for tailstock NO fine adjustment on the tailstock Spring-loaded quill insert Upper table cooling Standard workpiece spindle head MK 5 DIN 55026 size 5" MICRO-adjustment for standard workpiece spindle head Kodexzk Nijpfx Aauolr Dressing device on lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on grinding head Tool measurement system KELSET, MARPOSS Begin-cut sensor MARPOSS Measurement control prepared for MARPOSS Minialsar Paper band filter

Būklė: naudotas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m As a world-leading company for Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new quality and with warranty, but can also offer you comprehensive service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical cabling, pressure switches, etc. Kodpfxsuwv H He Aauslr - New absolute glass scales in X and Z axes - New absolute encoder (for B axis) Standard Equipment: - Workhead with MK5 taper, optionally with MK5/short taper adapter - Tailstock with MK4 taper. Optionally with fine adjustment - Grinding spindle stock T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on grinding spindle stock) ELASO integrated into control interface - Semi-automatic balancing by ELASO integrated into control interface - BEMAT grinding wheel measurement Optional at extra cost: - HF internal grinding spindle - Ultra-precise, highly torsion-resistant workpiece spindle - Measuring control - Extraction unit - Paper band filter Control: Basic Grinding Cycles - Workpiece zeroing with Z-position (longitudinal positioning) - Wheel measurement with BEMAT - Approach sensor GAP - Measurement of dressing diamonds - Corrections - External and internal cylindrical grinding (traverse and plunge grinding) - External and internal taper grinding (B axis swivel, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional Grinding Cycles - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Būklė: naudotas, Gamybos metai: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1: 500 mm grinding wheel diameter Kledpfxjuxfu Ns Aaujr -T2: 400 mm grinding wheel diameter -T6: internal grinding attachment -T7: internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP control on T1 and T2 by ELASO (contactless), integrated into the control interface -GAP control on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock, hydraulic with fine adjustment +/-150 µm -Dressing device on the lower table, workpiece spindle side -Dressing device on the lower table, tailstock side -Dressing device on the upper table -New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece headstock with direct drive *highly recommended for non-circular grinding *max. workpiece weight, between centers: 150 kg *max. workpiece weight, overhung: 75 kg *water-cooled *Morse taper 5 combined with short taper mount to DIN 55026 *spindle orientation stop *fixed lower section B-axis with direct drive, center height 225 mm *extremely torsion-resistant *high positional accuracy *resolution ° *water-cooled MECHANICAL OVERHAUL: - Complete machine overhauled according to Kellenberger measurement protocol - New paintwork New hydraulic unit: - Improved temperature control (oil cooler) - Energy-saving: only one pump, and not running continuously! - Pressure monitoring - Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X axis - Wear-free, since no contact during operation - No loss of accuracy, even during prolonged operation under full load at maximum speed - Friction-free at low speeds - No reversal jump of friction force when changing direction - Transmits smallest rotational movements - No stick-slip effect even at low speeds - No fluctuation in friction torque due to recirculating balls - Higher axial stiffness than ball screw drives - Significantly better damping, leading to improved workpiece surface and longer tool life - No vibrations due to recirculating balls - Also suitable for high speeds and accelerations - Cost-effective alternative to linear motors, offering higher accuracy and much less heating - Much lower power loss and thus no swarf issues on permanent magnets - Much lower cooling requirements compared to linear motors ELECTRICAL OVERHAUL: -New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface -Newly constructed control cabinet -New drive technology -Replacement of all electrical wiring (Berus pressure switches etc.) -New absolute glass scales in X and Z -New absolute encoder (for B-Axis) CONTROL SYSTEM: The grinding software consists of a base license and various options, depending on the machine configuration. Software base functions: - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillation grinding - Workpiece...

Būklė: naudotas, Gamybos metai: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit: Fanuc 310is Completely mechanically overhauled. Includes grinding process setup and tooling for one part. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control: GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel configuration left: 500 x 80 mm Grinding wheel configuration right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swiveling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH at the workpiece spindle headstock for internal and external grinding Preparation for measuring control systems Movomatic ESZ 400 or Marposs P7 ME Preparation for external filtration unit Coolant cut-off for table devices Fully enclosed emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: probe C25 Klsdpfxevdk N Es Aaujr Hydraulic preinstallation for Arobo steady rest

Būklė: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical overhaul: - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Klsdpfx Aajuxfucjujr Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...

Būklė: naudotas, Gamybos metai: 1995, Šlifavimo skersmuo: 350 mm Šlifavimo ilgis: 1000 mm Viršūnės aukštis: 175 mm Iš dalies renovuotas įrenginys su matavimo protokolu pagal naujos staklės tolerancijas NAUJA Eckelmann ENC valdymo sistema su BEMA šlifavimo programine įranga Klsdpfx Ajyatx Seauer Skaitmeniniu būdu valdoma B ašis Vidinio šlifavimo įrenginys, skersmuo 80 mm Kairėje šlifavimo diskas, skersmuo 400 mm Dešinėje šlifavimo diskas, skersmuo 300 mm Vidinio šlifavimo velenas HJN 828 Hidraulinis grąžtas Mikroreguliavimas KEL SET matavimo sistema

Būklė: naudotas, Gamybos metai: 2006, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Machine weight approx. 3.5 t Machine fully overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a freshly completed machine with some different options. Fanuc 21i control - Grinding head UR 1-2-3 for external/internal/planar grinding - B-axis automatic 1° Hirth toothing - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount 400mm diameter - Right grinding wheel mount 300mm diameter - Internal grinding attachment with belt drive - Tailstock with micrometric adjustment - Fine adjustment of upper table Kjdpfx Ajt Ii Nbsauelr - Paper band filter SBP4 240l

Būklė: naudotas, Grinding diameter 350 mm Grinding length 1500 mm Centre height 175 mm Left wheel 600 mm Grinding spindle head fixed, non-rotatable. Equipped with new FAGOR control system featuring BEMA cylindrical grinding interface. Kedot Ii Rfspfx Aaujlr With new service-friendly enclosure. Completely overhauled according to Kellenberger measurement protocol.

Būklė: naudotas, Gamybos metai: 1995, Šlifavimo skersmuo: 350 mm Šlifavimo ilgis: 1000 mm Centų aukštis: 175 mm 2013 m. kapitaliai suremontuota Sustiprinta ruošinio špindelio galva Nuolat reguliuojama B ašis Griebtuvas Be nuotraukoje matomo pradžios ir lunetos Valdymas: Kelco 90 Ksdpsxyadasfx Aauelr Mašiną galima apžiūrėti pas klientą prijungtą prie elektros iki 2026 m. sausio mėn. imtinai.

Gamybos metai: 2004, būklė: paruoštas naudoti (naudotas), X ašies eiga: 320 mm, Z ašies eigos atstumas: 1 150 mm, valdiklių gamintojas: HEIDENHAIN, bendras svoris: 6 000 kg, Ši KELLENBERGER KEL VARIA RS 175/1000 šlifavimo mašina buvo pagaminta 2004 metais Šveicarijoje. Jame yra HEIDENHAIN valdymo blokas. Mašinos privalumai Kokybiškos mašinos privalumai • Geros būklės Techninės mašinos privalumai • Atstumas tarp centrų: 1000 mm • Centro aukštis: 175 mm Kljdpfx Aeyi Elioaujr • Šlifavimo disko matmenys dešinėje Ø 400 x 50 mm • Šlifavimo disko galvutės judesiai -210°/+30° • Sukimosi greitis 8-800 aps. /min • Suklio tipas cm5

Būklė: naudotas, Gamybos metai: 1997, 2 vnt. apvalaus šlifavimo staklių Kellenberger, tipas: kel varia, pagaminta 1997 ir 1995 m. Kljdpfx Aaex T A Iwouor Techniniai duomenys ir daugiau nuotraukų pagal užklausą.